From: John Snow <jsnow@redhat.com>
To: Peter Crosthwaite <crosthwaitepeter@gmail.com>, qemu-devel@nongnu.org
Cc: b.galvani@gmail.com, Peter Crosthwaite <crosthwaite.peter@gmail.com>
Subject: Re: [Qemu-devel] [RFC 4/4] arm: allwinner-a10: Add SATA
Date: Mon, 12 Oct 2015 18:32:38 -0400 [thread overview]
Message-ID: <561C3506.9030400@redhat.com> (raw)
In-Reply-To: <7f3e4015110f8a5696c521a7572c3f968210f134.1444448892.git.crosthwaite.peter@gmail.com>
On 10/11/2015 12:21 PM, Peter Crosthwaite wrote:
> Add the Allwinner A10 AHCI controller module to the SoC.
>
> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
> ---
> hw/arm/allwinner-a10.c | 11 +++++++++++
> include/hw/arm/allwinner-a10.h | 5 +++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c
> index 56e924d..145038d 100644
> --- a/hw/arm/allwinner-a10.c
> +++ b/hw/arm/allwinner-a10.c
> @@ -42,6 +42,9 @@ static void aw_a10_init(Object *obj)
>
> object_initialize(&s->ccm, sizeof(s->ccm), TYPE_AW_A10_CCM);
> qdev_set_parent_bus(DEVICE(&s->ccm), sysbus_get_default());
> +
> + object_initialize(&s->sata, sizeof(s->sata), TYPE_ALLWINNER_AHCI);
> + qdev_set_parent_bus(DEVICE(&s->sata), sysbus_get_default());
> }
>
> static void aw_a10_realize(DeviceState *dev, Error **errp)
> @@ -104,6 +107,14 @@ static void aw_a10_realize(DeviceState *dev, Error **errp)
> sysbusdev = SYS_BUS_DEVICE(&s->ccm);
> sysbus_mmio_map(sysbusdev, 0, AW_A10_CCM_REG_BASE);
>
> + object_property_set_bool(OBJECT(&s->sata), true, "realized", &err);
> + if (err) {
> + error_propagate(errp, err);
> + return;
> + }
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sata), 0, AW_A10_SATA_BASE);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sata), 0, s->irq[56]);
> +
> /* FIXME use a qdev chardev prop instead of serial_hds[] */
> serial_mm_init(get_system_memory(), AW_A10_UART0_REG_BASE, 2, s->irq[1],
> 115200, serial_hds[0], DEVICE_NATIVE_ENDIAN);
> diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h
> index 88632c0..e0daff8 100644
> --- a/include/hw/arm/allwinner-a10.h
> +++ b/include/hw/arm/allwinner-a10.h
> @@ -8,6 +8,8 @@
> #include "hw/intc/allwinner-a10-pic.h"
> #include "hw/net/allwinner_emac.h"
> #include "hw/misc/allwinner-a10-ccm.h"
> +#include "hw/ide/pci.h"
> +#include "hw/ide/ahci.h"
>
> #include "sysemu/sysemu.h"
> #include "exec/address-spaces.h"
> @@ -18,6 +20,7 @@
> #define AW_A10_PIT_REG_BASE 0x01c20c00
> #define AW_A10_UART0_REG_BASE 0x01c28000
> #define AW_A10_EMAC_BASE 0x01c0b000
> +#define AW_A10_SATA_BASE 0x01c18000
>
> #define AW_A10_SDRAM_BASE 0x40000000
>
> @@ -35,6 +38,8 @@ typedef struct AwA10State {
> AwA10PICState intc;
> AwEmacState emac;
> AwA10CCMState ccm;
> +
> + AllwinnerAHCIState sata;
> } AwA10State;
>
> #define ALLWINNER_H_
>
Does this series have a pre-requisite patchset for this to apply cleanly?
--js
next prev parent reply other threads:[~2015-10-12 22:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-11 16:21 [Qemu-devel] [RFC 0/4] AHCI patches + Allwinner SATA Peter Crosthwaite
2015-10-11 16:21 ` [Qemu-devel] [RFC 1/4] ahci: Add some MMIO debug printfs Peter Crosthwaite
2015-10-11 16:21 ` [Qemu-devel] [RFC 2/4] ahci: split realize and init Peter Crosthwaite
2015-10-11 16:21 ` [Qemu-devel] [RFC 3/4] ahci: Add allwinner AHCI Peter Crosthwaite
2015-10-12 23:09 ` John Snow
2015-10-13 4:58 ` Peter Crosthwaite
2015-10-13 18:28 ` Beniamino Galvani
2015-10-26 15:48 ` Peter Crosthwaite
2015-10-11 16:21 ` [Qemu-devel] [RFC 4/4] arm: allwinner-a10: Add SATA Peter Crosthwaite
2015-10-12 22:32 ` John Snow [this message]
2015-10-13 4:55 ` Peter Crosthwaite
2015-10-12 20:41 ` [Qemu-devel] [RFC 0/4] AHCI patches + Allwinner SATA Beniamino Galvani
2015-10-13 5:02 ` Peter Crosthwaite
2015-10-26 15:25 ` John Snow
2015-10-29 16:41 ` Peter Crosthwaite
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=561C3506.9030400@redhat.com \
--to=jsnow@redhat.com \
--cc=b.galvani@gmail.com \
--cc=crosthwaite.peter@gmail.com \
--cc=crosthwaitepeter@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).