From: Wen Congyang <wency@cn.fujitsu.com>
To: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>,
qemu devel <qemu-devel@nongnu.org>,
Jason Wang <jasowang@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>,
Li Zhijian <lizhijian@cn.fujitsu.com>,
Gui jianfeng <guijianfeng@cn.fujitsu.com>,
"eddie.dong" <eddie.dong@intel.com>,
"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
Huang peng <peter.huangpeng@huawei.com>,
Gong lei <arei.gonglei@huawei.com>,
jan.kiszka@siemens.com
Subject: Re: [Qemu-devel] [RFC PATCH 3/9] colo-proxy: add colo-proxy framework
Date: Mon, 30 Nov 2015 11:10:11 +0800 [thread overview]
Message-ID: <565BBE13.2080201@cn.fujitsu.com> (raw)
In-Reply-To: <1448627251-11186-4-git-send-email-zhangchen.fnst@cn.fujitsu.com>
On 11/27/2015 08:27 PM, Zhang Chen wrote:
> From: zhangchen <zhangchen.fnst@cn.fujitsu.com>
>
> Colo-proxy is a plugin of qemu netfilter
> like filter-buffer and dump
>
> Signed-off-by: zhangchen <zhangchen.fnst@cn.fujitsu.com>
> ---
> net/Makefile.objs | 1 +
> net/colo-proxy.c | 139 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> net/colo-proxy.h | 63 +++++++++++++++++++++++++
> 3 files changed, 203 insertions(+)
> create mode 100644 net/colo-proxy.c
> create mode 100644 net/colo-proxy.h
>
> diff --git a/net/Makefile.objs b/net/Makefile.objs
> index 5fa2f97..95670f2 100644
> --- a/net/Makefile.objs
> +++ b/net/Makefile.objs
> @@ -15,3 +15,4 @@ common-obj-$(CONFIG_VDE) += vde.o
> common-obj-$(CONFIG_NETMAP) += netmap.o
> common-obj-y += filter.o
> common-obj-y += filter-buffer.o
> +common-obj-y += colo-proxy.o
> diff --git a/net/colo-proxy.c b/net/colo-proxy.c
> new file mode 100644
> index 0000000..98c2699
> --- /dev/null
> +++ b/net/colo-proxy.c
> @@ -0,0 +1,139 @@
> +/*
> + * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
> + * (a.k.a. Fault Tolerance or Continuous Replication)
> + *
> + * Copyright (c) 2015 HUAWEI TECHNOLOGIES CO., LTD.
> + * Copyright (c) 2015 FUJITSU LIMITED
> + * Copyright (c) 2015 Intel Corporation
> + *
> + * Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or
> + * later. See the COPYING file in the top-level directory.
> + */
> +
> +#include "colo-proxy.h"
> +
> +#define __DEBUG__
> +
> +#ifdef __DEBUG__
> +#define DEBUG(format, ...) printf(format, ##__VA_ARGS__)
> +#else
> +#define DEBUG(format, ...)
> +#endif
> +
> +
> +static ssize_t colo_proxy_receive_iov(NetFilterState *nf,
> + NetClientState *sender,
> + unsigned flags,
> + const struct iovec *iov,
> + int iovcnt,
> + NetPacketSent *sent_cb)
> +{
> + /*
> + * We return size when buffer a packet, the sender will take it as
> + * a already sent packet, so sent_cb should not be called later.
> + *
> + */
> + ColoProxyState *s = FILTER_COLO_PROXY(nf);
> + if (s->colo_mode == COLO_PRIMARY_MODE) {
> + /* colo_proxy_primary_handler */
> + } else {
> + /* colo_proxy_primary_handler */
> + }
> + return iov_size(iov, iovcnt);
> +}
> +
> +static void colo_proxy_cleanup(NetFilterState *nf)
> +{
> + /* cleanup */
> +}
> +
> +
> +static void colo_proxy_setup(NetFilterState *nf, Error **errp)
> +{
> + ColoProxyState *s = FILTER_COLO_PROXY(nf);
> + if (!s->addr) {
> + error_setg(errp, "filter colo_proxy needs 'addr' \
> + property set!");
> + return;
> + }
> +
> + if (nf->direction != NET_FILTER_DIRECTION_ALL) {
> + printf("colo need queue all packet,\
s/need/needs/
> + please startup colo-proxy with queue=all\n");
> + return;
> + }
> +
> + s->sockfd = -1;
> + s->has_failover = false;
> + colo_do_checkpoint = false;
> + g_queue_init(&s->unprocessed_connections);
> +
> + if (!strcmp(mode, PRIMARY_MODE)) {
> + s->colo_mode = COLO_PRIMARY_MODE;
> + } else if (!strcmp(mode, SECONDARY_MODE)) {
> + s->colo_mode = COLO_SECONDARY_MODE;
> + } else {
> + error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "mode",
> + "primary or secondary");
> + return;
> + }
> +}
> +
> +static void colo_proxy_class_init(ObjectClass *oc, void *data)
> +{
> + NetFilterClass *nfc = NETFILTER_CLASS(oc);
> +
> + nfc->setup = colo_proxy_setup;
> + nfc->cleanup = colo_proxy_cleanup;
> + nfc->receive_iov = colo_proxy_receive_iov;
> +}
> +
> +static char *colo_proxy_get_mode(Object *obj, Error **errp)
> +{
> + return g_strdup(mode);
> +}
> +
> +static void colo_proxy_set_mode(Object *obj, const char *value, Error **errp)
> +{
> + g_free(mode);
> + mode = g_strdup(value);
> +}
> +
> +static char *colo_proxy_get_addr(Object *obj, Error **errp)
> +{
> + ColoProxyState *s = FILTER_COLO_PROXY(obj);
> +
> + return g_strdup(s->addr);
> +}
> +
> +static void colo_proxy_set_addr(Object *obj, const char *value, Error **errp)
> +{
> + ColoProxyState *s = FILTER_COLO_PROXY(obj);
> + g_free(s->addr);
> + s->addr = g_strdup(value);
You can parse the address here, and can find the format error as early as possible.
> +}
> +
> +static void colo_proxy_init(Object *obj)
> +{
> + object_property_add_str(obj, "mode", colo_proxy_get_mode,
> + colo_proxy_set_mode, NULL);
> + object_property_add_str(obj, "addr", colo_proxy_get_addr,
> + colo_proxy_set_addr, NULL);
> +}
> +
> +static const TypeInfo colo_proxy_info = {
> + .name = TYPE_FILTER_COLO_PROXY,
> + .parent = TYPE_NETFILTER,
> + .class_init = colo_proxy_class_init,
> + .instance_init = colo_proxy_init,
> + .instance_size = sizeof(ColoProxyState),
> +};
> +
> +static void register_types(void)
> +{
> + type_register_static(&colo_proxy_info);
> +}
> +
> +type_init(register_types);
> diff --git a/net/colo-proxy.h b/net/colo-proxy.h
> new file mode 100644
> index 0000000..94afbc7
> --- /dev/null
> +++ b/net/colo-proxy.h
> @@ -0,0 +1,63 @@
> +/*
> + * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
> + * (a.k.a. Fault Tolerance or Continuous Replication)
> + *
> + * Copyright (c) 2015 HUAWEI TECHNOLOGIES CO., LTD.
> + * Copyright (c) 2015 FUJITSU LIMITED
> + * Copyright (c) 2015 Intel Corporation
> + *
> + * Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or
> + * later. See the COPYING file in the top-level directory.
> + */
> +
> +
> +#ifndef QEMU_COLO_PROXY_H
> +#define QEMU_COLO_PROXY_H
> +
> +#include "net/filter.h"
> +#include "net/queue.h"
> +#include "qemu-common.h"
> +#include "qemu/iov.h"
> +#include "qapi/qmp/qerror.h"
> +#include "qapi-visit.h"
> +#include "qom/object.h"
> +#include "qemu/sockets.h"
> +#include "qemu/main-loop.h"
> +#include <netinet/if_ether.h>
> +#include "qemu/jhash.h"
> +#include "qemu/coroutine.h"
Don't include too many header files here. You should only include the header files
which will be used in this header file.
> +
> +#define FILTER_COLO_PROXY(obj) \
> + OBJECT_CHECK(ColoProxyState, (obj), TYPE_FILTER_COLO_PROXY)
> +
> +#define TYPE_FILTER_COLO_PROXY "colo-proxy"
> +#define PRIMARY_MODE "primary"
> +#define SECONDARY_MODE "secondary"
> +
> +typedef enum {
> + COLO_PRIMARY_MODE, /* primary mode */
> + COLO_SECONDARY_MODE, /* secondary mode */
> +} mode_type;
> +
> +typedef struct ColoProxyState {
> + NetFilterState parent_obj;
> + NetQueue *incoming_queue; /* guest normal net queue */
> + NetFilterDirection direction; /* packet direction */
> + mode_type colo_mode; /* colo mode (primary or
> + * secondary)
> + */
> + char *addr; /* primary colo connect addr
> + * or secondary server addr
> + */
> + int sockfd; /* primary client socket fd or
> + * secondary server socket fd
> + */
> + bool has_failover; /* colo failover flag */
> + GHashTable *unprocessed_packets; /* hashtable to save connection */
> + GQueue unprocessed_connections; /* to save unprocessed_connections */
> + Coroutine *co;
> +} ColoProxyState;
> +
> +#endif /* QEMU_COLO_PROXY_H */
>
next prev parent reply other threads:[~2015-11-30 3:11 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-27 12:27 [Qemu-devel] [RFC PATCH 0/9] Add colo-proxy based on netfilter Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 1/9] Init colo-proxy object " Zhang Chen
2015-11-30 2:50 ` Wen Congyang
2015-11-30 5:38 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 2/9] jhash: add linux kernel jhashtable in qemu Zhang Chen
2015-12-01 11:23 ` Dr. David Alan Gilbert
2015-12-03 3:40 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 3/9] colo-proxy: add colo-proxy framework Zhang Chen
2015-11-28 2:46 ` Hailiang Zhang
2015-11-30 2:25 ` Zhang Chen
2015-11-30 3:10 ` Wen Congyang [this message]
2015-11-30 5:44 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 4/9] colo-proxy: add colo-proxy setup work Zhang Chen
2015-11-28 3:02 ` Hailiang Zhang
2015-11-30 2:35 ` Zhang Chen
2015-12-01 15:35 ` Dr. David Alan Gilbert
2015-12-03 3:49 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 5/9] net/colo-proxy: add colo packet handler Zhang Chen
2015-11-28 3:17 ` Hailiang Zhang
2015-11-30 5:37 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 6/9] net/colo-proxy: add packet forward function Zhang Chen
2015-12-01 15:50 ` Dr. David Alan Gilbert
2015-12-03 6:17 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 7/9] net/colo-proxy: add packet enqueue and handle function Zhang Chen
2015-12-01 16:12 ` Dr. David Alan Gilbert
2015-12-03 6:35 ` Zhang Chen
2015-12-03 9:09 ` Dr. David Alan Gilbert
2015-12-04 3:21 ` Zhang Chen
2015-12-04 9:14 ` Dr. David Alan Gilbert
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 8/9] net/colo-proxy: enqueue primary and secondary packet Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 9/9] net/colo-proxy: add packet compare and notify checkpoint Zhang Chen
2015-12-01 16:37 ` Dr. David Alan Gilbert
2015-12-03 7:10 ` Zhang Chen
2015-12-01 16:44 ` [Qemu-devel] [RFC PATCH 0/9] Add colo-proxy based on netfilter Dr. David Alan Gilbert
2015-12-03 7:33 ` Zhang Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=565BBE13.2080201@cn.fujitsu.com \
--to=wency@cn.fujitsu.com \
--cc=arei.gonglei@huawei.com \
--cc=dgilbert@redhat.com \
--cc=eddie.dong@intel.com \
--cc=guijianfeng@cn.fujitsu.com \
--cc=jan.kiszka@siemens.com \
--cc=jasowang@redhat.com \
--cc=lizhijian@cn.fujitsu.com \
--cc=peter.huangpeng@huawei.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=zhang.zhanghailiang@huawei.com \
--cc=zhangchen.fnst@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).