From: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
To: Wen Congyang <wency@cn.fujitsu.com>,
qemu devel <qemu-devel@nongnu.org>,
Jason Wang <jasowang@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>,
Li Zhijian <lizhijian@cn.fujitsu.com>,
Gui jianfeng <guijianfeng@cn.fujitsu.com>,
"eddie.dong" <eddie.dong@intel.com>,
"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
Huang peng <peter.huangpeng@huawei.com>,
Gong lei <arei.gonglei@huawei.com>,
jan.kiszka@siemens.com, hongyang.yang@easystack.cn
Subject: Re: [Qemu-devel] [RFC PATCH 3/9] colo-proxy: add colo-proxy framework
Date: Mon, 30 Nov 2015 13:44:24 +0800 [thread overview]
Message-ID: <565BE238.8030209@cn.fujitsu.com> (raw)
In-Reply-To: <565BBE13.2080201@cn.fujitsu.com>
On 11/30/2015 11:10 AM, Wen Congyang wrote:
> On 11/27/2015 08:27 PM, Zhang Chen wrote:
>> From: zhangchen <zhangchen.fnst@cn.fujitsu.com>
>>
>> Colo-proxy is a plugin of qemu netfilter
>> like filter-buffer and dump
>>
>> Signed-off-by: zhangchen <zhangchen.fnst@cn.fujitsu.com>
>> ---
>> net/Makefile.objs | 1 +
>> net/colo-proxy.c | 139 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> net/colo-proxy.h | 63 +++++++++++++++++++++++++
>> 3 files changed, 203 insertions(+)
>> create mode 100644 net/colo-proxy.c
>> create mode 100644 net/colo-proxy.h
>>
>> diff --git a/net/Makefile.objs b/net/Makefile.objs
>> index 5fa2f97..95670f2 100644
>> --- a/net/Makefile.objs
>> +++ b/net/Makefile.objs
>> @@ -15,3 +15,4 @@ common-obj-$(CONFIG_VDE) += vde.o
>> common-obj-$(CONFIG_NETMAP) += netmap.o
>> common-obj-y += filter.o
>> common-obj-y += filter-buffer.o
>> +common-obj-y += colo-proxy.o
>> diff --git a/net/colo-proxy.c b/net/colo-proxy.c
>> new file mode 100644
>> index 0000000..98c2699
>> --- /dev/null
>> +++ b/net/colo-proxy.c
>> @@ -0,0 +1,139 @@
>> +/*
>> + * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
>> + * (a.k.a. Fault Tolerance or Continuous Replication)
>> + *
>> + * Copyright (c) 2015 HUAWEI TECHNOLOGIES CO., LTD.
>> + * Copyright (c) 2015 FUJITSU LIMITED
>> + * Copyright (c) 2015 Intel Corporation
>> + *
>> + * Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or
>> + * later. See the COPYING file in the top-level directory.
>> + */
>> +
>> +#include "colo-proxy.h"
>> +
>> +#define __DEBUG__
>> +
>> +#ifdef __DEBUG__
>> +#define DEBUG(format, ...) printf(format, ##__VA_ARGS__)
>> +#else
>> +#define DEBUG(format, ...)
>> +#endif
>> +
>> +
>> +static ssize_t colo_proxy_receive_iov(NetFilterState *nf,
>> + NetClientState *sender,
>> + unsigned flags,
>> + const struct iovec *iov,
>> + int iovcnt,
>> + NetPacketSent *sent_cb)
>> +{
>> + /*
>> + * We return size when buffer a packet, the sender will take it as
>> + * a already sent packet, so sent_cb should not be called later.
>> + *
>> + */
>> + ColoProxyState *s = FILTER_COLO_PROXY(nf);
>> + if (s->colo_mode == COLO_PRIMARY_MODE) {
>> + /* colo_proxy_primary_handler */
>> + } else {
>> + /* colo_proxy_primary_handler */
>> + }
>> + return iov_size(iov, iovcnt);
>> +}
>> +
>> +static void colo_proxy_cleanup(NetFilterState *nf)
>> +{
>> + /* cleanup */
>> +}
>> +
>> +
>> +static void colo_proxy_setup(NetFilterState *nf, Error **errp)
>> +{
>> + ColoProxyState *s = FILTER_COLO_PROXY(nf);
>> + if (!s->addr) {
>> + error_setg(errp, "filter colo_proxy needs 'addr' \
>> + property set!");
>> + return;
>> + }
>> +
>> + if (nf->direction != NET_FILTER_DIRECTION_ALL) {
>> + printf("colo need queue all packet,\
> s/need/needs/
fix
thanks for review
zhangchen
>> + please startup colo-proxy with queue=all\n");
>> + return;
>> + }
>> +
>> + s->sockfd = -1;
>> + s->has_failover = false;
>> + colo_do_checkpoint = false;
>> + g_queue_init(&s->unprocessed_connections);
>> +
>> + if (!strcmp(mode, PRIMARY_MODE)) {
>> + s->colo_mode = COLO_PRIMARY_MODE;
>> + } else if (!strcmp(mode, SECONDARY_MODE)) {
>> + s->colo_mode = COLO_SECONDARY_MODE;
>> + } else {
>> + error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "mode",
>> + "primary or secondary");
>> + return;
>> + }
>> +}
>> +
>> +static void colo_proxy_class_init(ObjectClass *oc, void *data)
>> +{
>> + NetFilterClass *nfc = NETFILTER_CLASS(oc);
>> +
>> + nfc->setup = colo_proxy_setup;
>> + nfc->cleanup = colo_proxy_cleanup;
>> + nfc->receive_iov = colo_proxy_receive_iov;
>> +}
>> +
>> +static char *colo_proxy_get_mode(Object *obj, Error **errp)
>> +{
>> + return g_strdup(mode);
>> +}
>> +
>> +static void colo_proxy_set_mode(Object *obj, const char *value, Error **errp)
>> +{
>> + g_free(mode);
>> + mode = g_strdup(value);
>> +}
>> +
>> +static char *colo_proxy_get_addr(Object *obj, Error **errp)
>> +{
>> + ColoProxyState *s = FILTER_COLO_PROXY(obj);
>> +
>> + return g_strdup(s->addr);
>> +}
>> +
>> +static void colo_proxy_set_addr(Object *obj, const char *value, Error **errp)
>> +{
>> + ColoProxyState *s = FILTER_COLO_PROXY(obj);
>> + g_free(s->addr);
>> + s->addr = g_strdup(value);
> You can parse the address here, and can find the format error as early as possible.
ok,it will fix in next version
>> +}
>> +
>> +static void colo_proxy_init(Object *obj)
>> +{
>> + object_property_add_str(obj, "mode", colo_proxy_get_mode,
>> + colo_proxy_set_mode, NULL);
>> + object_property_add_str(obj, "addr", colo_proxy_get_addr,
>> + colo_proxy_set_addr, NULL);
>> +}
>> +
>> +static const TypeInfo colo_proxy_info = {
>> + .name = TYPE_FILTER_COLO_PROXY,
>> + .parent = TYPE_NETFILTER,
>> + .class_init = colo_proxy_class_init,
>> + .instance_init = colo_proxy_init,
>> + .instance_size = sizeof(ColoProxyState),
>> +};
>> +
>> +static void register_types(void)
>> +{
>> + type_register_static(&colo_proxy_info);
>> +}
>> +
>> +type_init(register_types);
>> diff --git a/net/colo-proxy.h b/net/colo-proxy.h
>> new file mode 100644
>> index 0000000..94afbc7
>> --- /dev/null
>> +++ b/net/colo-proxy.h
>> @@ -0,0 +1,63 @@
>> +/*
>> + * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
>> + * (a.k.a. Fault Tolerance or Continuous Replication)
>> + *
>> + * Copyright (c) 2015 HUAWEI TECHNOLOGIES CO., LTD.
>> + * Copyright (c) 2015 FUJITSU LIMITED
>> + * Copyright (c) 2015 Intel Corporation
>> + *
>> + * Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or
>> + * later. See the COPYING file in the top-level directory.
>> + */
>> +
>> +
>> +#ifndef QEMU_COLO_PROXY_H
>> +#define QEMU_COLO_PROXY_H
>> +
>> +#include "net/filter.h"
>> +#include "net/queue.h"
>> +#include "qemu-common.h"
>> +#include "qemu/iov.h"
>> +#include "qapi/qmp/qerror.h"
>> +#include "qapi-visit.h"
>> +#include "qom/object.h"
>> +#include "qemu/sockets.h"
>> +#include "qemu/main-loop.h"
>> +#include <netinet/if_ether.h>
>> +#include "qemu/jhash.h"
>> +#include "qemu/coroutine.h"
> Don't include too many header files here. You should only include the header files
> which will be used in this header file.
ok,I will move some to colo-proxy.c
>> +
>> +#define FILTER_COLO_PROXY(obj) \
>> + OBJECT_CHECK(ColoProxyState, (obj), TYPE_FILTER_COLO_PROXY)
>> +
>> +#define TYPE_FILTER_COLO_PROXY "colo-proxy"
>> +#define PRIMARY_MODE "primary"
>> +#define SECONDARY_MODE "secondary"
>> +
>> +typedef enum {
>> + COLO_PRIMARY_MODE, /* primary mode */
>> + COLO_SECONDARY_MODE, /* secondary mode */
>> +} mode_type;
>> +
>> +typedef struct ColoProxyState {
>> + NetFilterState parent_obj;
>> + NetQueue *incoming_queue; /* guest normal net queue */
>> + NetFilterDirection direction; /* packet direction */
>> + mode_type colo_mode; /* colo mode (primary or
>> + * secondary)
>> + */
>> + char *addr; /* primary colo connect addr
>> + * or secondary server addr
>> + */
>> + int sockfd; /* primary client socket fd or
>> + * secondary server socket fd
>> + */
>> + bool has_failover; /* colo failover flag */
>> + GHashTable *unprocessed_packets; /* hashtable to save connection */
>> + GQueue unprocessed_connections; /* to save unprocessed_connections */
>> + Coroutine *co;
>> +} ColoProxyState;
>> +
>> +#endif /* QEMU_COLO_PROXY_H */
>>
> .
>
next prev parent reply other threads:[~2015-11-30 5:42 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-27 12:27 [Qemu-devel] [RFC PATCH 0/9] Add colo-proxy based on netfilter Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 1/9] Init colo-proxy object " Zhang Chen
2015-11-30 2:50 ` Wen Congyang
2015-11-30 5:38 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 2/9] jhash: add linux kernel jhashtable in qemu Zhang Chen
2015-12-01 11:23 ` Dr. David Alan Gilbert
2015-12-03 3:40 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 3/9] colo-proxy: add colo-proxy framework Zhang Chen
2015-11-28 2:46 ` Hailiang Zhang
2015-11-30 2:25 ` Zhang Chen
2015-11-30 3:10 ` Wen Congyang
2015-11-30 5:44 ` Zhang Chen [this message]
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 4/9] colo-proxy: add colo-proxy setup work Zhang Chen
2015-11-28 3:02 ` Hailiang Zhang
2015-11-30 2:35 ` Zhang Chen
2015-12-01 15:35 ` Dr. David Alan Gilbert
2015-12-03 3:49 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 5/9] net/colo-proxy: add colo packet handler Zhang Chen
2015-11-28 3:17 ` Hailiang Zhang
2015-11-30 5:37 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 6/9] net/colo-proxy: add packet forward function Zhang Chen
2015-12-01 15:50 ` Dr. David Alan Gilbert
2015-12-03 6:17 ` Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 7/9] net/colo-proxy: add packet enqueue and handle function Zhang Chen
2015-12-01 16:12 ` Dr. David Alan Gilbert
2015-12-03 6:35 ` Zhang Chen
2015-12-03 9:09 ` Dr. David Alan Gilbert
2015-12-04 3:21 ` Zhang Chen
2015-12-04 9:14 ` Dr. David Alan Gilbert
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 8/9] net/colo-proxy: enqueue primary and secondary packet Zhang Chen
2015-11-27 12:27 ` [Qemu-devel] [RFC PATCH 9/9] net/colo-proxy: add packet compare and notify checkpoint Zhang Chen
2015-12-01 16:37 ` Dr. David Alan Gilbert
2015-12-03 7:10 ` Zhang Chen
2015-12-01 16:44 ` [Qemu-devel] [RFC PATCH 0/9] Add colo-proxy based on netfilter Dr. David Alan Gilbert
2015-12-03 7:33 ` Zhang Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=565BE238.8030209@cn.fujitsu.com \
--to=zhangchen.fnst@cn.fujitsu.com \
--cc=arei.gonglei@huawei.com \
--cc=dgilbert@redhat.com \
--cc=eddie.dong@intel.com \
--cc=guijianfeng@cn.fujitsu.com \
--cc=hongyang.yang@easystack.cn \
--cc=jan.kiszka@siemens.com \
--cc=jasowang@redhat.com \
--cc=lizhijian@cn.fujitsu.com \
--cc=peter.huangpeng@huawei.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=wency@cn.fujitsu.com \
--cc=zhang.zhanghailiang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).