From: Marcel Apfelbaum <marcel@redhat.com>
To: Cao jin <caoj.fnst@cn.fujitsu.com>, qemu-devel@nongnu.org
Cc: pbonzini@redhat.com
Subject: Re: [Qemu-devel] [PATCH v3] PXB: convert to realize()
Date: Tue, 22 Dec 2015 16:11:15 +0200 [thread overview]
Message-ID: <56795A03.4060409@redhat.com> (raw)
In-Reply-To: <1450788622-9132-1-git-send-email-caoj.fnst@cn.fujitsu.com>
On 12/22/2015 02:50 PM, Cao jin wrote:
> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
> ---
> v3 changelog:
> 1. As per Paolo`s review, also Marcel`s test suggestion, just unparent bus
> object while unref the ds & bds object
>
> hw/pci-bridge/pci_expander_bridge.c | 33 +++++++++++++++++++--------------
> 1 file changed, 19 insertions(+), 14 deletions(-)
>
> diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
> index 57f8a37..7db6a78 100644
> --- a/hw/pci-bridge/pci_expander_bridge.c
> +++ b/hw/pci-bridge/pci_expander_bridge.c
> @@ -145,25 +145,23 @@ static const TypeInfo pxb_host_info = {
> * Returns 0 on successs, -1 if i440fx host was not
> * found or the bus number is already in use.
> */
> -static int pxb_register_bus(PCIDevice *dev, PCIBus *pxb_bus)
> +static void pxb_register_bus(PCIDevice *dev, PCIBus *pxb_bus, Error **errp)
> {
> PCIBus *bus = dev->bus;
> int pxb_bus_num = pci_bus_num(pxb_bus);
>
> if (bus->parent_dev) {
> - error_report("PXB devices can be attached only to root bus.");
> - return -1;
> + error_setg(errp, "PXB devices can be attached only to root bus.");
> + return;
> }
>
> QLIST_FOREACH(bus, &bus->child, sibling) {
> if (pci_bus_num(bus) == pxb_bus_num) {
> - error_report("Bus %d is already in use.", pxb_bus_num);
> - return -1;
> + error_setg(errp, "Bus %d is already in use.", pxb_bus_num);
> + return;
> }
> }
> QLIST_INSERT_HEAD(&dev->bus->child, pxb_bus, sibling);
> -
> - return 0;
> }
>
> static int pxb_map_irq_fn(PCIDevice *pci_dev, int pin)
> @@ -193,7 +191,7 @@ static gint pxb_compare(gconstpointer a, gconstpointer b)
> 0;
> }
>
> -static int pxb_dev_initfn(PCIDevice *dev)
> +static void pxb_dev_realize(PCIDevice *dev, Error **errp)
> {
> PXBDev *pxb = PXB_DEV(dev);
> DeviceState *ds, *bds;
> @@ -202,8 +200,8 @@ static int pxb_dev_initfn(PCIDevice *dev)
>
> if (pxb->numa_node != NUMA_NODE_UNASSIGNED &&
> pxb->numa_node >= nb_numa_nodes) {
> - error_report("Illegal numa node %d.", pxb->numa_node);
> - return -EINVAL;
> + error_setg(errp, "Illegal numa node %d.", pxb->numa_node);
> + return;
> }
>
> if (dev->qdev.id && *dev->qdev.id) {
> @@ -225,8 +223,9 @@ static int pxb_dev_initfn(PCIDevice *dev)
>
> PCI_HOST_BRIDGE(ds)->bus = bus;
>
> - if (pxb_register_bus(dev, bus)) {
> - return -EINVAL;
> + pxb_register_bus(dev, bus, errp);
> + if (*errp) {
> + goto err_register_bus;
> }
>
> qdev_init_nofail(ds);
> @@ -237,7 +236,13 @@ static int pxb_dev_initfn(PCIDevice *dev)
> pci_config_set_class(dev->config, PCI_CLASS_BRIDGE_HOST);
>
> pxb_dev_list = g_list_insert_sorted(pxb_dev_list, pxb, pxb_compare);
> - return 0;
> +
> + return;
> +
> +err_register_bus:
> + object_unref(OBJECT(bds));
> + object_unparent(OBJECT(bus));
> + object_unref(OBJECT(ds));
> }
>
> static void pxb_dev_exitfn(PCIDevice *pci_dev)
> @@ -259,7 +264,7 @@ static void pxb_dev_class_init(ObjectClass *klass, void *data)
> DeviceClass *dc = DEVICE_CLASS(klass);
> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
>
> - k->init = pxb_dev_initfn;
> + k->realize = pxb_dev_realize;
> k->exit = pxb_dev_exitfn;
> k->vendor_id = PCI_VENDOR_ID_REDHAT;
> k->device_id = PCI_DEVICE_ID_REDHAT_PXB;
>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Thanks,
Marcel
next prev parent reply other threads:[~2015-12-22 14:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-22 12:50 [Qemu-devel] [PATCH v3] PXB: convert to realize() Cao jin
2015-12-22 14:11 ` Marcel Apfelbaum [this message]
2016-01-10 7:27 ` Cao jin
2016-01-11 15:44 ` Markus Armbruster
-- strict thread matches above, loose matches on Subject: below --
2015-12-22 11:48 Cao jin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56795A03.4060409@redhat.com \
--to=marcel@redhat.com \
--cc=caoj.fnst@cn.fujitsu.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).