From: Laurent Vivier <lvivier@redhat.com>
To: Greg Kurz <gkurz@linux.vnet.ibm.com>,
"Michael S. Tsirkin" <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 1/6] virtio-net: use the backend cross-endian capabilities
Date: Thu, 7 Jan 2016 17:22:34 +0100 [thread overview]
Message-ID: <568E90CA.6090501@redhat.com> (raw)
In-Reply-To: <20160107113202.10897.33293.stgit@bahia.huguette.org>
On 07/01/2016 12:32, Greg Kurz wrote:
> When running a fully emulated device in cross-endian conditions, including
> a virtio 1.0 device offered to a big endian guest, we need to fix the vnet
> headers. This is currently handled by the virtio_net_hdr_swap() function
> in the core virtio-net code but it should actually be handled by the net
> backend.
>
> With this patch, virtio-net now tries to configure the backend to do the
> endian fixing when the device starts. If the backend cannot support the
> requested endiannes, we have to fall back on virtio_net_hdr_swap(): this
> is recorded in the needs_vnet_hdr_swap flag, to be used in the TX and RX
> paths.
>
> The current vhost-net code also tries to configure net backends. This will
> be no more needed and will be addressed in a subsequent patch.
>
> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
> ---
> hw/net/virtio-net.c | 33 +++++++++++++++++++++++++++++++--
> include/hw/virtio/virtio-net.h | 1 +
> 2 files changed, 32 insertions(+), 2 deletions(-)
>
> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
> index a877614e3e7a..d4cc94ea5e55 100644
> --- a/hw/net/virtio-net.c
> +++ b/hw/net/virtio-net.c
> @@ -152,6 +152,31 @@ static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
> }
> }
>
> +static void virtio_net_vnet_status(VirtIONet *n, uint8_t status)
> +{
> + VirtIODevice *vdev = VIRTIO_DEVICE(n);
> + NetClientState *peer = qemu_get_queue(n->nic)->peer;
> +
> + if (virtio_net_started(n, status)) {
> + int r;
> +
> + if (virtio_is_big_endian(vdev)) {
> + r = qemu_set_vnet_be(peer, true);
> + } else {
> + r = qemu_set_vnet_le(peer, true);
> + }
> +
> + n->needs_vnet_hdr_swap = !!r;
> + } else if (virtio_net_started(n, vdev->status) &&
> + !virtio_net_started(n, status)) {
Except if I miss something,
"!virtio_net_started(n, status)" is always true in the case of
"if (virtio_net_started(n, status)) { } else ...".
> + if (virtio_is_big_endian(vdev)) {
> + qemu_set_vnet_be(peer, false);
> + } else {
> + qemu_set_vnet_le(peer, false);
> + }
> + }
> +}
> +
> static void virtio_net_set_status(struct VirtIODevice *vdev, uint8_t status)
> {
> VirtIONet *n = VIRTIO_NET(vdev);
> @@ -159,6 +184,7 @@ static void virtio_net_set_status(struct VirtIODevice *vdev, uint8_t status)
> int i;
> uint8_t queue_status;
>
> + virtio_net_vnet_status(n, status);
> virtio_net_vhost_status(n, status);
>
> for (i = 0; i < n->max_queues; i++) {
> @@ -957,7 +983,10 @@ static void receive_header(VirtIONet *n, const struct iovec *iov, int iov_cnt,
> void *wbuf = (void *)buf;
> work_around_broken_dhclient(wbuf, wbuf + n->host_hdr_len,
> size - n->host_hdr_len);
> - virtio_net_hdr_swap(VIRTIO_DEVICE(n), wbuf);
> +
> + if (n->needs_vnet_hdr_swap) {
> + virtio_net_hdr_swap(VIRTIO_DEVICE(n), wbuf);
> + }
> iov_from_buf(iov, iov_cnt, 0, buf, sizeof(struct virtio_net_hdr));
> } else {
> struct virtio_net_hdr hdr = {
> @@ -1167,7 +1196,7 @@ static int32_t virtio_net_flush_tx(VirtIONetQueue *q)
> error_report("virtio-net header incorrect");
> exit(1);
> }
> - if (virtio_needs_swap(vdev)) {
> + if (n->needs_vnet_hdr_swap) {
> virtio_net_hdr_swap(vdev, (void *) &mhdr);
> sg2[0].iov_base = &mhdr;
> sg2[0].iov_len = n->guest_hdr_len;
> diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h
> index f3cc25feca2b..27bc868fbc7d 100644
> --- a/include/hw/virtio/virtio-net.h
> +++ b/include/hw/virtio/virtio-net.h
> @@ -94,6 +94,7 @@ typedef struct VirtIONet {
> uint64_t curr_guest_offloads;
> QEMUTimer *announce_timer;
> int announce_counter;
> + bool needs_vnet_hdr_swap;
> } VirtIONet;
>
> void virtio_net_set_netclient_name(VirtIONet *n, const char *name,
>
>
next prev parent reply other threads:[~2016-01-07 16:22 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-07 11:31 [Qemu-devel] [PATCH 0/6] virtio/vhost cross-endian cleanup Greg Kurz
2016-01-07 11:32 ` [Qemu-devel] [PATCH 1/6] virtio-net: use the backend cross-endian capabilities Greg Kurz
2016-01-07 16:22 ` Laurent Vivier [this message]
2016-01-07 17:23 ` Greg Kurz
2016-01-07 18:32 ` Laurent Vivier
2016-01-08 14:19 ` Greg Kurz
2016-01-08 15:25 ` Laurent Vivier
2016-01-08 16:00 ` Greg Kurz
2016-01-07 11:32 ` [Qemu-devel] [PATCH 2/6] Revert "vhost-net: tell tap backend about the vnet endianness" Greg Kurz
2016-01-07 19:52 ` Laurent Vivier
2016-01-08 9:07 ` Greg Kurz
2016-01-08 10:11 ` Cornelia Huck
2016-01-08 10:26 ` Greg Kurz
2016-01-08 11:09 ` Cornelia Huck
2016-01-07 11:32 ` [Qemu-devel] [PATCH 3/6] virtio: drop the virtio_needs_swap() helper Greg Kurz
2016-01-07 19:55 ` Laurent Vivier
2016-01-08 9:16 ` Greg Kurz
2016-01-07 11:32 ` [Qemu-devel] [PATCH 4/6] virtio: move cross-endian helper to vhost Greg Kurz
2016-01-07 11:32 ` [Qemu-devel] [PATCH 5/6] vhost: move virtio 1.0 check to cross-endian helper Greg Kurz
2016-01-07 20:07 ` Laurent Vivier
2016-01-08 9:21 ` Greg Kurz
2016-01-08 10:07 ` Cornelia Huck
2016-01-08 10:22 ` Laurent Vivier
2016-01-07 11:32 ` [Qemu-devel] [PATCH 6/6] virtio: optimize virtio_access_is_big_endian() for little-endian targets Greg Kurz
2016-01-07 20:25 ` Laurent Vivier
2016-01-08 9:27 ` Greg Kurz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=568E90CA.6090501@redhat.com \
--to=lvivier@redhat.com \
--cc=gkurz@linux.vnet.ibm.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).