From: Alexey Kardashevskiy <aikbox@gmail.com>
To: David Gibson <david@gibson.dropbear.id.au>, mdroth@linux.vnet.ibm.com
Cc: lvivier@redhat.com, thuth@redhat.com, qemu-ppc@nongnu.org,
agraf@suse.de, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCHv2 1/3] spapr: Small fixes to rtas_ibm_get_system_parameter, remove rtas_st_buffer
Date: Tue, 19 Jan 2016 15:38:09 +1100 [thread overview]
Message-ID: <569DBDB1.3050405@gmail.com> (raw)
In-Reply-To: <1453177824-27408-2-git-send-email-david@gibson.dropbear.id.au>
On 01/19/2016 03:30 PM, David Gibson wrote:
> rtas_st_buffer() appears in spapr.h as though it were a widely used helper,
> but in fact it is only used for saving data in a format used by
> rtas_ibm_get_system_parameter(). This changes it to a local helper more
> specifically for that function.
>
> While we're there fix a couple of small defects in
> rtas_ibm_get_system_parameter:
> - For the string value SPLPAR_CHARACTERISTICS, it wasn't including the
> terminating \0 in the length which it should according to LoPAPR
> 7.3.16.1
> - It now checks that the supplied buffer has at least enough space for
> the length of the returned data, and returns an error if it does not.
>
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
> ---
> hw/ppc/spapr_rtas.c | 22 ++++++++++++++++++----
> include/hw/ppc/spapr.h | 28 +++++++++-------------------
> 2 files changed, 27 insertions(+), 23 deletions(-)
>
> diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c
> index 34b12a3..32cdd66 100644
> --- a/hw/ppc/spapr_rtas.c
> +++ b/hw/ppc/spapr_rtas.c
> @@ -228,6 +228,20 @@ static void rtas_stop_self(PowerPCCPU *cpu, sPAPRMachineState *spapr,
> env->msr = 0;
> }
>
> +
Nit: unneeded empty line. Besides that,
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> +static inline int sysparm_st(target_ulong addr, target_ulong len,
> + const void *val, uint16_t vallen)
> +{
> + hwaddr phys = ppc64_phys_to_real(addr);
> +
> + if (len < 2) {
> + return RTAS_OUT_SYSPARM_PARAM_ERROR;
> + }
> + stw_be_phys(&address_space_memory, phys, vallen);
> + cpu_physical_memory_write(phys + 2, val, MIN(len - 2, vallen));
> + return RTAS_OUT_SUCCESS;
> +}
> +
> static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu,
> sPAPRMachineState *spapr,
> uint32_t token, uint32_t nargs,
> @@ -237,7 +251,7 @@ static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu,
> target_ulong parameter = rtas_ld(args, 0);
> target_ulong buffer = rtas_ld(args, 1);
> target_ulong length = rtas_ld(args, 2);
> - target_ulong ret = RTAS_OUT_SUCCESS;
> + target_ulong ret;
>
> switch (parameter) {
> case RTAS_SYSPARM_SPLPAR_CHARACTERISTICS: {
> @@ -249,18 +263,18 @@ static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu,
> current_machine->ram_size / M_BYTE,
> smp_cpus,
> max_cpus);
> - rtas_st_buffer(buffer, length, (uint8_t *)param_val, strlen(param_val));
> + ret = sysparm_st(buffer, length, param_val, strlen(param_val) + 1);
> g_free(param_val);
> break;
> }
> case RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE: {
> uint8_t param_val = DIAGNOSTICS_RUN_MODE_DISABLED;
>
> - rtas_st_buffer(buffer, length, ¶m_val, sizeof(param_val));
> + ret = sysparm_st(buffer, length, ¶m_val, sizeof(param_val));
> break;
> }
> case RTAS_SYSPARM_UUID:
> - rtas_st_buffer(buffer, length, qemu_uuid, (qemu_uuid_set ? 16 : 0));
> + ret = sysparm_st(buffer, length, qemu_uuid, (qemu_uuid_set ? 16 : 0));
> break;
> default:
> ret = RTAS_OUT_NOT_SUPPORTED;
> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> index 53af76a..1e10fc9 100644
> --- a/include/hw/ppc/spapr.h
> +++ b/include/hw/ppc/spapr.h
> @@ -408,14 +408,15 @@ int spapr_allocate_irq_block(int num, bool lsi, bool msi);
> #define RTAS_SLOT_PERM_ERR_LOG 2
>
> /* RTAS return codes */
> -#define RTAS_OUT_SUCCESS 0
> -#define RTAS_OUT_NO_ERRORS_FOUND 1
> -#define RTAS_OUT_HW_ERROR -1
> -#define RTAS_OUT_BUSY -2
> -#define RTAS_OUT_PARAM_ERROR -3
> -#define RTAS_OUT_NOT_SUPPORTED -3
> -#define RTAS_OUT_NO_SUCH_INDICATOR -3
> -#define RTAS_OUT_NOT_AUTHORIZED -9002
> +#define RTAS_OUT_SUCCESS 0
> +#define RTAS_OUT_NO_ERRORS_FOUND 1
> +#define RTAS_OUT_HW_ERROR -1
> +#define RTAS_OUT_BUSY -2
> +#define RTAS_OUT_PARAM_ERROR -3
> +#define RTAS_OUT_NOT_SUPPORTED -3
> +#define RTAS_OUT_NO_SUCH_INDICATOR -3
> +#define RTAS_OUT_NOT_AUTHORIZED -9002
> +#define RTAS_OUT_SYSPARM_PARAM_ERROR -9999
>
> /* RTAS tokens */
> #define RTAS_TOKEN_BASE 0x2000
> @@ -513,17 +514,6 @@ static inline void rtas_st_buffer_direct(target_ulong phys,
> MIN(buffer_len, phys_len));
> }
>
> -static inline void rtas_st_buffer(target_ulong phys, target_ulong phys_len,
> - uint8_t *buffer, uint16_t buffer_len)
> -{
> - if (phys_len < 2) {
> - return;
> - }
> - stw_be_phys(&address_space_memory,
> - ppc64_phys_to_real(phys), buffer_len);
> - rtas_st_buffer_direct(phys + 2, phys_len - 2, buffer, buffer_len);
> -}
> -
> typedef void (*spapr_rtas_fn)(PowerPCCPU *cpu, sPAPRMachineState *sm,
> uint32_t token,
> uint32_t nargs, target_ulong args,
>
--
Alexey
next prev parent reply other threads:[~2016-01-19 4:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-19 4:30 [Qemu-devel] [PATCHv2 0/3] Reduce abuse of rtas_st / rtas_ld David Gibson
2016-01-19 4:30 ` [Qemu-devel] [PATCHv2 1/3] spapr: Small fixes to rtas_ibm_get_system_parameter, remove rtas_st_buffer David Gibson
2016-01-19 4:38 ` Alexey Kardashevskiy [this message]
2016-01-19 4:59 ` David Gibson
2016-01-19 4:30 ` [Qemu-devel] [PATCHv2 2/3] spapr: Remove rtas_st_buffer_direct() David Gibson
2016-01-19 4:41 ` Alexey Kardashevskiy
2016-01-19 4:30 ` [Qemu-devel] [PATCHv2 3/3] spapr: Remove abuse of rtas_ld() in h_client_architecture_support David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=569DBDB1.3050405@gmail.com \
--to=aikbox@gmail.com \
--cc=agraf@suse.de \
--cc=david@gibson.dropbear.id.au \
--cc=lvivier@redhat.com \
--cc=mdroth@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).