From: Jason Wang <jasowang@redhat.com>
To: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>,
qemu devel <qemu-devel@nongnu.org>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>,
Gui jianfeng <guijianfeng@cn.fujitsu.com>,
"eddie.dong" <eddie.dong@intel.com>,
"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
Yang Hongyang <hongyang.yang@easystack.cn>,
zhanghailiang <zhang.zhanghailiang@huawei.com>
Subject: Re: [Qemu-devel] [PATCH V2] net/traffic-mirror:Add traffic-mirror
Date: Thu, 28 Jan 2016 13:44:40 +0800 [thread overview]
Message-ID: <56A9AAC8.4010803@redhat.com> (raw)
In-Reply-To: <1453862428-25570-1-git-send-email-zhangchen.fnst@cn.fujitsu.com>
On 01/27/2016 10:40 AM, Zhang Chen wrote:
> From: ZhangChen <zhangchen.fnst@cn.fujitsu.com>
>
> Traffic-mirror is a netfilter plugin.
> It gives qemu the ability to copy and mirror guest's
> net packet. we output packet to chardev.
>
> usage:
>
> -netdev tap,id=hn0
> -chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait
> -traffic-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0
>
> Signed-off-by: ZhangChen <zhangchen.fnst@cn.fujitsu.com>
> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Thanks for the patch. Several questions:
- I'm curious about how the patch was tested? Simple setup e.g:
-netdev tap,id=hn0 -device virtio-net-pci,netdev=hn0 -chardev
socket,id=c0,host=localhost,port=4444,server,nowait -object
traffic-mirror,netdev=hn0,outdev=c0,id=f0 -netdev
socket,id=s0,connect=127.0.0.1:4444 -device e1000,netdev=s0
does not works for me.
- Is a reliable mirroring (e.g no packet drops during mirroring) is
needed for COLO? If yes, this patch seems could not guarantee this.
- Please consider to write a unit test for this patch.
And see comments below.
Thanks
> ---
> net/Makefile.objs | 1 +
> net/traffic-mirror.c | 173 +++++++++++++++++++++++++++++++++++++++++++++++++++
> qemu-options.hx | 5 ++
> vl.c | 3 +-
> 4 files changed, 181 insertions(+), 1 deletion(-)
> create mode 100644 net/traffic-mirror.c
>
> diff --git a/net/Makefile.objs b/net/Makefile.objs
> index 5fa2f97..de06ebe 100644
> --- a/net/Makefile.objs
> +++ b/net/Makefile.objs
> @@ -15,3 +15,4 @@ common-obj-$(CONFIG_VDE) += vde.o
> common-obj-$(CONFIG_NETMAP) += netmap.o
> common-obj-y += filter.o
> common-obj-y += filter-buffer.o
> +common-obj-y += traffic-mirror.o
Let's s/traffic-mirror/filter-mirror/g to be consistent with other filters.
> diff --git a/net/traffic-mirror.c b/net/traffic-mirror.c
> new file mode 100644
> index 0000000..bed915c
> --- /dev/null
> +++ b/net/traffic-mirror.c
> @@ -0,0 +1,173 @@
> +/*
> + * Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
> + * Copyright (c) 2016 FUJITSU LIMITED
> + * Copyright (c) 2016 Intel Corporation
> + *
> + * Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or
> + * later. See the COPYING file in the top-level directory.
> + */
> +
> +#include "net/filter.h"
> +#include "net/net.h"
> +#include "qemu-common.h"
> +#include "qapi/qmp/qerror.h"
> +#include "qapi-visit.h"
> +#include "qom/object.h"
> +#include "qemu/main-loop.h"
> +#include "qemu/error-report.h"
> +#include "trace.h"
> +#include "sysemu/char.h"
> +#include "qemu/iov.h"
> +
> +#define FILTER_TRAFFIC_MIRROR(obj) \
> + OBJECT_CHECK(MirrorState, (obj), TYPE_FILTER_TRAFFIC_MIRROR)
> +
> +#define TYPE_FILTER_TRAFFIC_MIRROR "traffic-mirror"
> +
> +typedef struct MirrorState {
> + NetFilterState parent_obj;
> + char *outdev;
> + CharDriverState *chr_out;
> +
> +} MirrorState;
> +
> +static ssize_t traffic_mirror_send(NetFilterState *nf,
> + const struct iovec *iov,
> + int iovcnt)
> +{
> + MirrorState *s = FILTER_TRAFFIC_MIRROR(nf);
> + ssize_t ret = 0;
> + ssize_t size = 0;
> + char *buf;
> +
> + size = iov_size(iov, iovcnt);
> + if (!size) {
> + return 0;
> + }
> +
> + buf = g_malloc0(size);
> + iov_to_buf(iov, iovcnt, 0, buf, size);
> + ret = qemu_chr_fe_write(s->chr_out, (uint8_t *)&size, sizeof(size));
htonl(size)?
> + if (ret < 0) {
This check is not sufficient, for some reason, only part of the packets
maybe sent by the socket. Need to handle this properly, otherwise it may
confuse receiver.
> + g_free(buf);
> + return ret;
> + }
> +
> + ret = qemu_chr_fe_write(s->chr_out, (uint8_t *)buf, size);
> + g_free(buf);
> + return ret;
Ditto.
> +}
> +
> +static ssize_t traffic_mirror_receive_iov(NetFilterState *nf,
> + NetClientState *sender,
> + unsigned flags,
> + const struct iovec *iov,
> + int iovcnt,
> + NetPacketSent *sent_cb)
> +{
> + /*
> + * We copy and mirror packet to outdev,
> + * then put back the packet.
> + */
The code could explain itself, so the comment is unnecessary.
> + ssize_t ret = 0;
> +
> + ret = traffic_mirror_send(nf, iov, iovcnt);
> + if (ret < 0) {
> + error_report("traffic_mirror_send failed");
Monitor could be flooded by this.
> + }
> +
> + return 0;
> +}
> +
Other looks good.
next prev parent reply other threads:[~2016-01-28 5:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 2:40 [Qemu-devel] [PATCH V2] net/traffic-mirror:Add traffic-mirror Zhang Chen
2016-01-27 9:23 ` Hailiang Zhang
2016-01-28 5:44 ` Jason Wang [this message]
2016-01-28 7:44 ` Zhang Chen
2016-01-28 8:37 ` Jason Wang
2016-01-28 9:52 ` Zhang Chen
2016-01-28 10:06 ` Jason Wang
2016-01-29 1:38 ` Li Zhijian
2016-02-01 2:57 ` Jason Wang
2016-02-01 7:50 ` Li Zhijian
2016-02-01 9:11 ` Dr. David Alan Gilbert
2016-02-01 9:42 ` Li Zhijian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56A9AAC8.4010803@redhat.com \
--to=jasowang@redhat.com \
--cc=dgilbert@redhat.com \
--cc=eddie.dong@intel.com \
--cc=guijianfeng@cn.fujitsu.com \
--cc=hongyang.yang@easystack.cn \
--cc=lizhijian@cn.fujitsu.com \
--cc=qemu-devel@nongnu.org \
--cc=zhang.zhanghailiang@huawei.com \
--cc=zhangchen.fnst@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).