From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: David Gibson <david@gibson.dropbear.id.au>, benh@kernel.crashing.org
Cc: agraf@suse.de, qemu-devel@nongnu.org, gwshan@au1.ibm.com,
mdroth@linux.vnet.ibm.com, alex.williamson@redhat.com,
qemu-ppc@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 02/12] spapr_pci: Switch to vfio_eeh_as_op() interface
Date: Mon, 29 Feb 2016 12:43:05 +1100 [thread overview]
Message-ID: <56D3A229.6030402@ozlabs.ru> (raw)
In-Reply-To: <1456486323-8047-3-git-send-email-david@gibson.dropbear.id.au>
On 02/26/2016 10:31 PM, David Gibson wrote:
> This switches all EEH on VFIO operations in spapr_pci_vfio.c from the
> broken vfio_container_ioctl() interface to the new vfio_as_eeh_op()
> interface.
>
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>mak
Where is that "mak" from? :)
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> hw/ppc/spapr_pci_vfio.c | 50 ++++++++++++++++---------------------------------
> 1 file changed, 16 insertions(+), 34 deletions(-)
>
> diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
> index 2f3752e..b1e8e8e 100644
> --- a/hw/ppc/spapr_pci_vfio.c
> +++ b/hw/ppc/spapr_pci_vfio.c
> @@ -73,15 +73,9 @@ static void spapr_phb_vfio_finish_realize(sPAPRPHBState *sphb, Error **errp)
> spapr_tce_get_iommu(tcet));
> }
>
> -static void spapr_phb_vfio_eeh_reenable(sPAPRPHBVFIOState *svphb)
> +static void spapr_phb_vfio_eeh_reenable(sPAPRPHBState *sphb)
> {
> - struct vfio_eeh_pe_op op = {
> - .argsz = sizeof(op),
> - .op = VFIO_EEH_PE_ENABLE
> - };
> -
> - vfio_container_ioctl(&svphb->phb.iommu_as,
> - svphb->iommugroupid, VFIO_EEH_PE_OP, &op);
> + vfio_eeh_as_op(&sphb->iommu_as, VFIO_EEH_PE_ENABLE);
> }
>
> static void spapr_phb_vfio_reset(DeviceState *qdev)
> @@ -92,19 +86,18 @@ static void spapr_phb_vfio_reset(DeviceState *qdev)
> * ensures that the contained PCI devices will work properly
> * after reboot.
> */
> - spapr_phb_vfio_eeh_reenable(SPAPR_PCI_VFIO_HOST_BRIDGE(qdev));
> + spapr_phb_vfio_eeh_reenable(SPAPR_PCI_HOST_BRIDGE(qdev));
> }
>
> static int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
> unsigned int addr, int option)
> {
> - sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
> - struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
> + uint32_t op;
> int ret;
>
> switch (option) {
> case RTAS_EEH_DISABLE:
> - op.op = VFIO_EEH_PE_DISABLE;
> + op = VFIO_EEH_PE_DISABLE;
> break;
> case RTAS_EEH_ENABLE: {
> PCIHostState *phb;
> @@ -122,21 +115,20 @@ static int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
> return RTAS_OUT_PARAM_ERROR;
> }
>
> - op.op = VFIO_EEH_PE_ENABLE;
> + op = VFIO_EEH_PE_ENABLE;
> break;
> }
> case RTAS_EEH_THAW_IO:
> - op.op = VFIO_EEH_PE_UNFREEZE_IO;
> + op = VFIO_EEH_PE_UNFREEZE_IO;
> break;
> case RTAS_EEH_THAW_DMA:
> - op.op = VFIO_EEH_PE_UNFREEZE_DMA;
> + op = VFIO_EEH_PE_UNFREEZE_DMA;
> break;
> default:
> return RTAS_OUT_PARAM_ERROR;
> }
>
> - ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
> - VFIO_EEH_PE_OP, &op);
> + ret = vfio_eeh_as_op(&sphb->iommu_as, op);
> if (ret < 0) {
> return RTAS_OUT_HW_ERROR;
> }
> @@ -146,13 +138,9 @@ static int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
>
> static int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb, int *state)
> {
> - sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
> - struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
> int ret;
>
> - op.op = VFIO_EEH_PE_GET_STATE;
> - ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
> - VFIO_EEH_PE_OP, &op);
> + ret = vfio_eeh_as_op(&sphb->iommu_as, VFIO_EEH_PE_GET_STATE);
> if (ret < 0) {
> return RTAS_OUT_PARAM_ERROR;
> }
> @@ -206,28 +194,26 @@ static void spapr_phb_vfio_eeh_pre_reset(sPAPRPHBState *sphb)
>
> static int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option)
> {
> - sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
> - struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
> + uint32_t op;
> int ret;
>
> switch (option) {
> case RTAS_SLOT_RESET_DEACTIVATE:
> - op.op = VFIO_EEH_PE_RESET_DEACTIVATE;
> + op = VFIO_EEH_PE_RESET_DEACTIVATE;
> break;
> case RTAS_SLOT_RESET_HOT:
> spapr_phb_vfio_eeh_pre_reset(sphb);
> - op.op = VFIO_EEH_PE_RESET_HOT;
> + op = VFIO_EEH_PE_RESET_HOT;
> break;
> case RTAS_SLOT_RESET_FUNDAMENTAL:
> spapr_phb_vfio_eeh_pre_reset(sphb);
> - op.op = VFIO_EEH_PE_RESET_FUNDAMENTAL;
> + op = VFIO_EEH_PE_RESET_FUNDAMENTAL;
> break;
> default:
> return RTAS_OUT_PARAM_ERROR;
> }
>
> - ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
> - VFIO_EEH_PE_OP, &op);
> + ret = vfio_eeh_as_op(&sphb->iommu_as, op);
> if (ret < 0) {
> return RTAS_OUT_HW_ERROR;
> }
> @@ -237,13 +223,9 @@ static int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option)
>
> static int spapr_phb_vfio_eeh_configure(sPAPRPHBState *sphb)
> {
> - sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
> - struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
> int ret;
>
> - op.op = VFIO_EEH_PE_CONFIGURE;
> - ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
> - VFIO_EEH_PE_OP, &op);
> + ret = vfio_eeh_as_op(&sphb->iommu_as, VFIO_EEH_PE_CONFIGURE);
> if (ret < 0) {
> return RTAS_OUT_PARAM_ERROR;
> }
>
--
Alexey
next prev parent reply other threads:[~2016-02-29 1:43 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-26 11:31 [Qemu-devel] [PATCH 00/12] Allow EEH on spapr-pci-host-bridge devices David Gibson
2016-02-26 11:31 ` [Qemu-devel] [PATCH 01/12] vfio: Start improving VFIO/EEH interface David Gibson
2016-02-29 0:58 ` Alexey Kardashevskiy
2016-02-29 3:13 ` David Gibson
2016-02-26 11:31 ` [Qemu-devel] [PATCH 02/12] spapr_pci: Switch to vfio_eeh_as_op() interface David Gibson
2016-02-29 1:43 ` Alexey Kardashevskiy [this message]
2016-02-29 3:00 ` David Gibson
2016-02-26 11:31 ` [Qemu-devel] [PATCH 03/12] spapr_pci: Eliminate class callbacks David Gibson
2016-02-29 1:43 ` Alexey Kardashevskiy
2016-02-29 3:42 ` Alexey Kardashevskiy
2016-02-26 11:31 ` [Qemu-devel] [PATCH 04/12] spapr_pci: Fold spapr_phb_vfio_eeh_configure() into spapr_pci code David Gibson
2016-02-29 1:43 ` Alexey Kardashevskiy
2016-02-29 3:45 ` Alexey Kardashevskiy
2016-02-29 4:25 ` Alexey Kardashevskiy
2016-02-29 6:20 ` David Gibson
2016-02-26 11:31 ` [Qemu-devel] [PATCH 05/12] spapr_pci: Fold spapr_phb_vfio_eeh_reset() " David Gibson
2016-02-29 1:43 ` Alexey Kardashevskiy
2016-02-26 11:31 ` [Qemu-devel] [PATCH 06/12] spapr_pci: Fold spapr_phb_vfio_eeh_get_state() " David Gibson
2016-02-29 1:43 ` Alexey Kardashevskiy
2016-02-26 11:31 ` [Qemu-devel] [PATCH 07/12] spapr_pci: Fold spapr_phb_vfio_eeh_set_option() " David Gibson
2016-02-29 1:44 ` Alexey Kardashevskiy
2016-02-26 11:31 ` [Qemu-devel] [PATCH 08/12] spapr_pci: Fold spapr_phb_vfio_reset() " David Gibson
2016-02-29 1:44 ` Alexey Kardashevskiy
2016-02-26 11:32 ` [Qemu-devel] [PATCH 09/12] spapr_pci: Allow EEH on spapr-pci-host-bridge David Gibson
2016-02-29 1:44 ` Alexey Kardashevskiy
2016-02-26 11:32 ` [Qemu-devel] [PATCH 10/12] spapr_pci: (Mostly) remove spapr-pci-vfio-host-bridge David Gibson
2016-02-29 1:42 ` Alexey Kardashevskiy
2016-02-29 3:06 ` David Gibson
2016-02-26 11:32 ` [Qemu-devel] [PATCH 11/12] spapr_pci: Remove finish_realize hook David Gibson
2016-02-29 1:44 ` Alexey Kardashevskiy
2016-02-26 11:32 ` [Qemu-devel] [PATCH 12/12] vfio: Eliminate vfio_container_ioctl() David Gibson
2016-02-29 1:44 ` Alexey Kardashevskiy
2016-02-26 11:33 ` [Qemu-devel] [PATCH 00/12] Allow EEH on spapr-pci-host-bridge devices David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D3A229.6030402@ozlabs.ru \
--to=aik@ozlabs.ru \
--cc=agraf@suse.de \
--cc=alex.williamson@redhat.com \
--cc=benh@kernel.crashing.org \
--cc=david@gibson.dropbear.id.au \
--cc=gwshan@au1.ibm.com \
--cc=mdroth@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).