* [Qemu-devel] [PATCH COLO-Frame v16 01/35] configure: Add parameter for configure to enable/disable COLO support
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 02/35] migration: Introduce capability 'x-colo' to migration zhanghailiang
` (35 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
configure --enable-colo/--disable-colo to switch COLO
support on/off.
COLO support is On by default.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v11:
- Turn COLO on in default (Eric's suggestion)
---
configure | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/configure b/configure
index 5db29f0..57f23ba 100755
--- a/configure
+++ b/configure
@@ -229,6 +229,7 @@ xfs=""
vhost_net="no"
vhost_scsi="no"
kvm="no"
+colo="yes"
rdma=""
gprof="no"
debug_tcg="no"
@@ -916,6 +917,10 @@ for opt do
;;
--enable-kvm) kvm="yes"
;;
+ --disable-colo) colo="no"
+ ;;
+ --enable-colo) colo="yes"
+ ;;
--disable-tcg-interpreter) tcg_interpreter="no"
;;
--enable-tcg-interpreter) tcg_interpreter="yes"
@@ -1339,6 +1344,7 @@ disabled with --disable-FEATURE, default is enabled if available:
fdt fdt device tree
bluez bluez stack connectivity
kvm KVM acceleration support
+ colo COarse-grain LOck-stepping VM for Non-stop Service
rdma RDMA-based migration support
uuid uuid support
vde support for vde network
@@ -4793,6 +4799,7 @@ echo "Linux AIO support $linux_aio"
echo "ATTR/XATTR support $attr"
echo "Install blobs $blobs"
echo "KVM support $kvm"
+echo "COLO support $colo"
echo "RDMA support $rdma"
echo "TCG interpreter $tcg_interpreter"
echo "fdt support $fdt"
@@ -5407,6 +5414,10 @@ if have_backend "ftrace"; then
fi
echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
+if test "$colo" = "yes"; then
+ echo "CONFIG_COLO=y" >> $config_host_mak
+fi
+
if test "$rdma" = "yes" ; then
echo "CONFIG_RDMA=y" >> $config_host_mak
fi
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 02/35] migration: Introduce capability 'x-colo' to migration
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 01/35] configure: Add parameter for configure to enable/disable COLO support zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 03/35] COLO: migrate colo related info to secondary node zhanghailiang
` (34 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
We add helper function colo_supported() to indicate whether
colo is supported or not, with which we use to control whether or not
showing 'x-colo' string to users, they can use qmp command
'query-migrate-capabilities' or hmp command 'info migrate_capabilities'
to learn if colo is supported.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
v16:
- fix compile broken due to missing osdep.h
v14:
- Fix the date of Copyright to 2016
v10:
- Rename capability 'colo' to experimental 'x-colo' (Eric's suggestion).
- Rename migrate_enable_colo() to migrate_colo_enabled() (Eric's suggestion).
---
include/migration/colo.h | 20 ++++++++++++++++++++
include/migration/migration.h | 1 +
migration/Makefile.objs | 1 +
migration/colo.c | 19 +++++++++++++++++++
migration/migration.c | 18 ++++++++++++++++++
qapi-schema.json | 6 +++++-
qmp-commands.hx | 2 +-
stubs/Makefile.objs | 1 +
stubs/migration-colo.c | 19 +++++++++++++++++++
9 files changed, 85 insertions(+), 2 deletions(-)
create mode 100644 include/migration/colo.h
create mode 100644 migration/colo.c
create mode 100644 stubs/migration-colo.c
diff --git a/include/migration/colo.h b/include/migration/colo.h
new file mode 100644
index 0000000..59a632a
--- /dev/null
+++ b/include/migration/colo.h
@@ -0,0 +1,20 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
+ * Copyright (c) 2016 FUJITSU LIMITED
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#ifndef QEMU_COLO_H
+#define QEMU_COLO_H
+
+#include "qemu-common.h"
+
+bool colo_supported(void);
+
+#endif
diff --git a/include/migration/migration.h b/include/migration/migration.h
index ac2c12c..f6b641a 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -276,6 +276,7 @@ int xbzrle_decode_buffer(uint8_t *src, int slen, uint8_t *dst, int dlen);
int migrate_use_xbzrle(void);
int64_t migrate_xbzrle_cache_size(void);
+bool migrate_colo_enabled(void);
int64_t xbzrle_cache_resize(int64_t new_size);
diff --git a/migration/Makefile.objs b/migration/Makefile.objs
index 0cac6d7..65ecc35 100644
--- a/migration/Makefile.objs
+++ b/migration/Makefile.objs
@@ -1,4 +1,5 @@
common-obj-y += migration.o tcp.o
+common-obj-$(CONFIG_COLO) += colo.o
common-obj-y += vmstate.o
common-obj-y += qemu-file.o qemu-file-buf.o qemu-file-unix.o qemu-file-stdio.o
common-obj-y += xbzrle.o postcopy-ram.o
diff --git a/migration/colo.c b/migration/colo.c
new file mode 100644
index 0000000..5749016
--- /dev/null
+++ b/migration/colo.c
@@ -0,0 +1,19 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
+ * Copyright (c) 2016 FUJITSU LIMITED
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "migration/colo.h"
+
+bool colo_supported(void)
+{
+ return true;
+}
diff --git a/migration/migration.c b/migration/migration.c
index 991313a..b6cd130 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -34,6 +34,7 @@
#include "qom/cpu.h"
#include "exec/memory.h"
#include "exec/address-spaces.h"
+#include "migration/colo.h"
#define MAX_THROTTLE (32 << 20) /* Migration transfer speed throttling */
@@ -494,6 +495,9 @@ MigrationCapabilityStatusList *qmp_query_migrate_capabilities(Error **errp)
caps = NULL; /* silence compiler warning */
for (i = 0; i < MIGRATION_CAPABILITY__MAX; i++) {
+ if (i == MIGRATION_CAPABILITY_X_COLO && !colo_supported()) {
+ continue;
+ }
if (head == NULL) {
head = g_malloc0(sizeof(*caps));
caps = head;
@@ -694,6 +698,14 @@ void qmp_migrate_set_capabilities(MigrationCapabilityStatusList *params,
}
for (cap = params; cap; cap = cap->next) {
+ if (cap->value->capability == MIGRATION_CAPABILITY_X_COLO) {
+ if (!colo_supported()) {
+ error_setg(errp, "COLO is not currently supported, please"
+ " configure with --enable-colo option in order to"
+ " support COLO feature");
+ continue;
+ }
+ }
s->enabled_capabilities[cap->value->capability] = cap->value->state;
}
@@ -1615,6 +1627,12 @@ fail:
MIGRATION_STATUS_FAILED);
}
+bool migrate_colo_enabled(void)
+{
+ MigrationState *s = migrate_get_current();
+ return s->enabled_capabilities[MIGRATION_CAPABILITY_X_COLO];
+}
+
/*
* Master migration thread on the source VM.
* It drives the migration and pumps the data down the outgoing channel.
diff --git a/qapi-schema.json b/qapi-schema.json
index 54634c4..1d22e96 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -544,11 +544,15 @@
# been migrated, pulling the remaining pages along as needed. NOTE: If
# the migration fails during postcopy the VM will fail. (since 2.6)
#
+# @x-colo: If enabled, migration will never end, and the state of the VM on the
+# primary side will be migrated continuously to the VM on secondary
+# side. (since 2.7)
+#
# Since: 1.2
##
{ 'enum': 'MigrationCapability',
'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
- 'compress', 'events', 'postcopy-ram'] }
+ 'compress', 'events', 'postcopy-ram', 'x-colo'] }
##
# @MigrationCapabilityStatus
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 8856256..3ff05aa 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -3751,7 +3751,7 @@ Query current migration capabilities
- "zero-blocks" : Zero Blocks state (json-bool)
- "compress": Multiple compression threads state (json-bool)
- "events": Migration state change event state (json-bool)
- - "postcopy-ram": postcopy ram state (json-bool)
+ - "x-colo" : COarse-Grain LOck Stepping for Non-stop Service (json-bool)
Arguments:
diff --git a/stubs/Makefile.objs b/stubs/Makefile.objs
index b6d1e65..e79816b 100644
--- a/stubs/Makefile.objs
+++ b/stubs/Makefile.objs
@@ -40,3 +40,4 @@ stub-obj-y += qmp_pc_dimm_device_list.o
stub-obj-y += target-monitor-defs.o
stub-obj-y += target-get-monitor-def.o
stub-obj-y += vhost.o
+stub-obj-y += migration-colo.o
diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
new file mode 100644
index 0000000..d215057
--- /dev/null
+++ b/stubs/migration-colo.c
@@ -0,0 +1,19 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
+ * Copyright (c) 2016 FUJITSU LIMITED
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "migration/colo.h"
+
+bool colo_supported(void)
+{
+ return false;
+}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 03/35] COLO: migrate colo related info to secondary node
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 01/35] configure: Add parameter for configure to enable/disable COLO support zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 02/35] migration: Introduce capability 'x-colo' to migration zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 04/35] migration: Integrate COLO checkpoint process into migration zhanghailiang
` (33 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
We can know if VM in destination should go into COLO mode by refer to
the info that been migrated from PVM.
We skip this section if colo is not enabled (i.e.
migrate_set_capability colo off), so that, It not break compatibility with migration
however the --enable-colo/disable-colo on the source/destination;
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v16:
- Fix compile broken due to missing osdep.h
v14:
- Adjust the place of calling colo_info_init()
v11:
- Add Reviewed-by tag
v10:
- Use VMSTATE_BOOL instead of VMSTATE_UNIT32 for 'colo_requested' (Dave's suggestion)
---
include/migration/colo.h | 2 ++
migration/Makefile.objs | 1 +
migration/colo-comm.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++
vl.c | 4 +++-
4 files changed, 57 insertions(+), 1 deletion(-)
create mode 100644 migration/colo-comm.c
diff --git a/include/migration/colo.h b/include/migration/colo.h
index 59a632a..1c899a0 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -14,7 +14,9 @@
#define QEMU_COLO_H
#include "qemu-common.h"
+#include "migration/migration.h"
bool colo_supported(void);
+void colo_info_init(void);
#endif
diff --git a/migration/Makefile.objs b/migration/Makefile.objs
index 65ecc35..81b5713 100644
--- a/migration/Makefile.objs
+++ b/migration/Makefile.objs
@@ -1,5 +1,6 @@
common-obj-y += migration.o tcp.o
common-obj-$(CONFIG_COLO) += colo.o
+common-obj-y += colo-comm.o
common-obj-y += vmstate.o
common-obj-y += qemu-file.o qemu-file-buf.o qemu-file-unix.o qemu-file-stdio.o
common-obj-y += xbzrle.o postcopy-ram.o
diff --git a/migration/colo-comm.c b/migration/colo-comm.c
new file mode 100644
index 0000000..2d06ace
--- /dev/null
+++ b/migration/colo-comm.c
@@ -0,0 +1,51 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
+ * Copyright (c) 2016 FUJITSU LIMITED
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include <migration/colo.h>
+#include "trace.h"
+
+typedef struct {
+ bool colo_requested;
+} COLOInfo;
+
+static COLOInfo colo_info;
+
+static void colo_info_pre_save(void *opaque)
+{
+ COLOInfo *s = opaque;
+
+ s->colo_requested = migrate_colo_enabled();
+}
+
+static bool colo_info_need(void *opaque)
+{
+ return migrate_colo_enabled();
+}
+
+static const VMStateDescription colo_state = {
+ .name = "COLOState",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .pre_save = colo_info_pre_save,
+ .needed = colo_info_need,
+ .fields = (VMStateField[]) {
+ VMSTATE_BOOL(colo_requested, COLOInfo),
+ VMSTATE_END_OF_LIST()
+ },
+};
+
+void colo_info_init(void)
+{
+ vmstate_register(NULL, 0, &colo_state, &colo_info);
+}
diff --git a/vl.c b/vl.c
index 3629336..50b3a48 100644
--- a/vl.c
+++ b/vl.c
@@ -87,6 +87,7 @@ int main(int argc, char **argv)
#include "sysemu/dma.h"
#include "audio/audio.h"
#include "migration/migration.h"
+#include "migration/colo.h"
#include "sysemu/kvm.h"
#include "qapi/qmp/qjson.h"
#include "qemu/option.h"
@@ -4400,6 +4401,8 @@ int main(int argc, char **argv, char **envp)
/* clean up network at qemu process termination */
atexit(&net_cleanup);
+ colo_info_init();
+
if (net_init_clients() < 0) {
exit(1);
}
@@ -4431,7 +4434,6 @@ int main(int argc, char **argv, char **envp)
blk_mig_init();
ram_mig_init();
-
/* If the currently selected machine wishes to override the units-per-bus
* property of its default HBA interface type, do so now. */
if (machine_class->units_per_default_bus) {
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 04/35] migration: Integrate COLO checkpoint process into migration
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (2 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 03/35] COLO: migrate colo related info to secondary node zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 05/35] migration: Integrate COLO checkpoint process into loadvm zhanghailiang
` (32 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
Add a migrate state: MIGRATION_STATUS_COLO, enter this migration state
after the first live migration successfully finished.
We reuse migration thread, so if colo is enabled by user, migration thread will
go into the process of colo.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v11:
- Rebase to master
- Add Reviewed-by tag
v10:
- Simplify process by dropping colo thread and reusing migration thread.
(Dave's suggestion)
---
include/migration/colo.h | 3 +++
migration/colo.c | 31 +++++++++++++++++++++++++++++++
migration/migration.c | 30 ++++++++++++++++++++++++++----
qapi-schema.json | 4 +++-
stubs/migration-colo.c | 9 +++++++++
trace-events | 3 +++
6 files changed, 75 insertions(+), 5 deletions(-)
diff --git a/include/migration/colo.h b/include/migration/colo.h
index 1c899a0..bf84b99 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -19,4 +19,7 @@
bool colo_supported(void);
void colo_info_init(void);
+void migrate_start_colo_process(MigrationState *s);
+bool migration_in_colo_state(void);
+
#endif
diff --git a/migration/colo.c b/migration/colo.c
index 5749016..d2c2d1f 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -11,9 +11,40 @@
*/
#include "qemu/osdep.h"
+#include "sysemu/sysemu.h"
#include "migration/colo.h"
+#include "trace.h"
bool colo_supported(void)
{
return true;
}
+
+bool migration_in_colo_state(void)
+{
+ MigrationState *s = migrate_get_current();
+
+ return (s->state == MIGRATION_STATUS_COLO);
+}
+
+static void colo_process_checkpoint(MigrationState *s)
+{
+ qemu_mutex_lock_iothread();
+ vm_start();
+ qemu_mutex_unlock_iothread();
+ trace_colo_vm_state_change("stop", "run");
+
+ /*TODO: COLO checkpoint savevm loop*/
+
+ migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
+ MIGRATION_STATUS_COMPLETED);
+}
+
+void migrate_start_colo_process(MigrationState *s)
+{
+ qemu_mutex_unlock_iothread();
+ migrate_set_state(&s->state, MIGRATION_STATUS_ACTIVE,
+ MIGRATION_STATUS_COLO);
+ colo_process_checkpoint(s);
+ qemu_mutex_lock_iothread();
+}
diff --git a/migration/migration.c b/migration/migration.c
index b6cd130..2580e53 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -651,6 +651,10 @@ MigrationInfo *qmp_query_migrate(Error **errp)
get_xbzrle_cache_stats(info);
break;
+ case MIGRATION_STATUS_COLO:
+ info->has_status = true;
+ /* TODO: display COLO specific information (checkpoint info etc.) */
+ break;
case MIGRATION_STATUS_COMPLETED:
get_xbzrle_cache_stats(info);
@@ -1017,7 +1021,8 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,
params.shared = has_inc && inc;
if (migration_is_setup_or_active(s->state) ||
- s->state == MIGRATION_STATUS_CANCELLING) {
+ s->state == MIGRATION_STATUS_CANCELLING ||
+ s->state == MIGRATION_STATUS_COLO) {
error_setg(errp, QERR_MIGRATION_ACTIVE);
return;
}
@@ -1618,8 +1623,11 @@ static void migration_completion(MigrationState *s, int current_active_state,
goto fail;
}
- migrate_set_state(&s->state, current_active_state,
- MIGRATION_STATUS_COMPLETED);
+ if (!migrate_colo_enabled()) {
+ migrate_set_state(&s->state, current_active_state,
+ MIGRATION_STATUS_COMPLETED);
+ }
+
return;
fail:
@@ -1651,6 +1659,7 @@ static void *migration_thread(void *opaque)
bool entered_postcopy = false;
/* The active state we expect to be in; ACTIVE or POSTCOPY_ACTIVE */
enum MigrationStatus current_active_state = MIGRATION_STATUS_ACTIVE;
+ bool enable_colo = migrate_colo_enabled();
rcu_register_thread();
@@ -1759,7 +1768,11 @@ static void *migration_thread(void *opaque)
end_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
qemu_mutex_lock_iothread();
- qemu_savevm_state_cleanup();
+ /* The resource has been allocated by migration will be reused in COLO
+ process, so don't release them. */
+ if (!enable_colo) {
+ qemu_savevm_state_cleanup();
+ }
if (s->state == MIGRATION_STATUS_COMPLETED) {
uint64_t transferred_bytes = qemu_ftell(s->to_dst_file);
s->total_time = end_time - s->total_time;
@@ -1772,6 +1785,15 @@ static void *migration_thread(void *opaque)
}
runstate_set(RUN_STATE_POSTMIGRATE);
} else {
+ if (s->state == MIGRATION_STATUS_ACTIVE && enable_colo) {
+ migrate_start_colo_process(s);
+ qemu_savevm_state_cleanup();
+ /*
+ * Fixme: we will run VM in COLO no matter its old running state.
+ * After exited COLO, we will keep running.
+ */
+ old_vm_running = true;
+ }
if (old_vm_running && !entered_postcopy) {
vm_start();
}
diff --git a/qapi-schema.json b/qapi-schema.json
index 1d22e96..b8189e9 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -434,12 +434,14 @@
#
# @failed: some error occurred during migration process.
#
+# @colo: VM is in the process of fault tolerance. (since 2.7)
+#
# Since: 2.3
#
##
{ 'enum': 'MigrationStatus',
'data': [ 'none', 'setup', 'cancelling', 'cancelled',
- 'active', 'postcopy-active', 'completed', 'failed' ] }
+ 'active', 'postcopy-active', 'completed', 'failed', 'colo' ] }
##
# @MigrationInfo
diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
index d215057..0c8eef4 100644
--- a/stubs/migration-colo.c
+++ b/stubs/migration-colo.c
@@ -17,3 +17,12 @@ bool colo_supported(void)
{
return false;
}
+
+bool migration_in_colo_state(void)
+{
+ return false;
+}
+
+void migrate_start_colo_process(MigrationState *s)
+{
+}
diff --git a/trace-events b/trace-events
index 996a77f..b02ef90 100644
--- a/trace-events
+++ b/trace-events
@@ -1597,6 +1597,9 @@ postcopy_ram_incoming_cleanup_entry(void) ""
postcopy_ram_incoming_cleanup_exit(void) ""
postcopy_ram_incoming_cleanup_join(void) ""
+# migration/colo.c
+colo_vm_state_change(const char *old, const char *new) "Change '%s' => '%s'"
+
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
kvm_vm_ioctl(int type, void *arg) "type 0x%x, arg %p"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 05/35] migration: Integrate COLO checkpoint process into loadvm
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (3 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 04/35] migration: Integrate COLO checkpoint process into migration zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 06/35] COLO/migration: Create a new communication path from destination to source zhanghailiang
` (31 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
Switch from normal migration loadvm process into COLO checkpoint process if
COLO mode is enabled.
We add three new members to struct MigrationIncomingState, 'have_colo_incoming_thread'
and 'colo_incoming_thread' record the colo related threads for secondary VM,
'migration_incoming_co' records the original migration incoming coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Add Reviewed-by tag
v11:
- We moved the place of bdrv_invalidate_cache_all(), but done the deleting work
in other patch. Fix it.
- Add documentation for colo in 'MigrationStatus' (Eric's review comment)
v10:
- fix a bug about fd leak which is found by Dave.
---
include/migration/colo.h | 7 +++++++
include/migration/migration.h | 7 +++++++
migration/colo-comm.c | 10 ++++++++++
migration/colo.c | 21 +++++++++++++++++++++
migration/migration.c | 12 ++++++++++++
stubs/migration-colo.c | 10 ++++++++++
6 files changed, 67 insertions(+)
diff --git a/include/migration/colo.h b/include/migration/colo.h
index bf84b99..b40676c 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -15,6 +15,8 @@
#include "qemu-common.h"
#include "migration/migration.h"
+#include "qemu/coroutine_int.h"
+#include "qemu/thread.h"
bool colo_supported(void);
void colo_info_init(void);
@@ -22,4 +24,9 @@ void colo_info_init(void);
void migrate_start_colo_process(MigrationState *s);
bool migration_in_colo_state(void);
+/* loadvm */
+bool migration_incoming_enable_colo(void);
+void migration_incoming_exit_colo(void);
+void *colo_process_incoming_thread(void *opaque);
+bool migration_incoming_in_colo_state(void);
#endif
diff --git a/include/migration/migration.h b/include/migration/migration.h
index f6b641a..0dcb2bd 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -21,6 +21,7 @@
#include "migration/vmstate.h"
#include "qapi-types.h"
#include "exec/cpu-common.h"
+#include "qemu/coroutine_int.h"
#define QEMU_VM_FILE_MAGIC 0x5145564d
#define QEMU_VM_FILE_VERSION_COMPAT 0x00000002
@@ -107,6 +108,12 @@ struct MigrationIncomingState {
QEMUBH *bh;
int state;
+
+ bool have_colo_incoming_thread;
+ QemuThread colo_incoming_thread;
+ /* The coroutine we should enter (back) after failover */
+ Coroutine *migration_incoming_co;
+
/* See savevm.c */
LoadStateEntry_Head loadvm_handlers;
};
diff --git a/migration/colo-comm.c b/migration/colo-comm.c
index 2d06ace..1a36893 100644
--- a/migration/colo-comm.c
+++ b/migration/colo-comm.c
@@ -49,3 +49,13 @@ void colo_info_init(void)
{
vmstate_register(NULL, 0, &colo_state, &colo_info);
}
+
+bool migration_incoming_enable_colo(void)
+{
+ return colo_info.colo_requested;
+}
+
+void migration_incoming_exit_colo(void)
+{
+ colo_info.colo_requested = 0;
+}
diff --git a/migration/colo.c b/migration/colo.c
index d2c2d1f..68815c0 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -27,6 +27,13 @@ bool migration_in_colo_state(void)
return (s->state == MIGRATION_STATUS_COLO);
}
+bool migration_incoming_in_colo_state(void)
+{
+ MigrationIncomingState *mis = migration_incoming_get_current();
+
+ return mis && (mis->state == MIGRATION_STATUS_COLO);
+}
+
static void colo_process_checkpoint(MigrationState *s)
{
qemu_mutex_lock_iothread();
@@ -48,3 +55,17 @@ void migrate_start_colo_process(MigrationState *s)
colo_process_checkpoint(s);
qemu_mutex_lock_iothread();
}
+
+void *colo_process_incoming_thread(void *opaque)
+{
+ MigrationIncomingState *mis = opaque;
+
+ migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
+ MIGRATION_STATUS_COLO);
+
+ /* TODO: COLO checkpoint restore loop */
+
+ migration_incoming_exit_colo();
+
+ return NULL;
+}
diff --git a/migration/migration.c b/migration/migration.c
index 2580e53..aa767ed 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -405,6 +405,18 @@ static void process_incoming_migration_co(void *opaque)
/* Else if something went wrong then just fall out of the normal exit */
}
+ /* we get colo info, and know if we are in colo mode */
+ if (!ret && migration_incoming_enable_colo()) {
+ mis->migration_incoming_co = qemu_coroutine_self();
+ qemu_thread_create(&mis->colo_incoming_thread, "colo incoming",
+ colo_process_incoming_thread, mis, QEMU_THREAD_JOINABLE);
+ mis->have_colo_incoming_thread = true;
+ qemu_coroutine_yield();
+
+ /* Wait checkpoint incoming thread exit before free resource */
+ qemu_thread_join(&mis->colo_incoming_thread);
+ }
+
qemu_fclose(f);
free_xbzrle_decoded_buf();
diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
index 0c8eef4..7b72395 100644
--- a/stubs/migration-colo.c
+++ b/stubs/migration-colo.c
@@ -23,6 +23,16 @@ bool migration_in_colo_state(void)
return false;
}
+bool migration_incoming_in_colo_state(void)
+{
+ return false;
+}
+
void migrate_start_colo_process(MigrationState *s)
{
}
+
+void *colo_process_incoming_thread(void *opaque)
+{
+ return NULL;
+}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 06/35] COLO/migration: Create a new communication path from destination to source
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (4 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 05/35] migration: Integrate COLO checkpoint process into loadvm zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 07/35] COLO: Implement colo checkpoint protocol zhanghailiang
` (30 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
This new communication path will be used for returning messages
from destination to source.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Remove useless error report
v12:
- Add Reviewed-by tag
v11:
- Rebase master to use qemu_file_get_return_path() for opening return path
v10:
- fix the the error log (Dave's suggestion).
---
migration/colo.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/migration/colo.c b/migration/colo.c
index 68815c0..202150b 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -14,6 +14,7 @@
#include "sysemu/sysemu.h"
#include "migration/colo.h"
#include "trace.h"
+#include "qemu/error-report.h"
bool colo_supported(void)
{
@@ -36,6 +37,12 @@ bool migration_incoming_in_colo_state(void)
static void colo_process_checkpoint(MigrationState *s)
{
+ s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
+ if (!s->rp_state.from_dst_file) {
+ error_report("Open QEMUFile from_dst_file failed");
+ goto out;
+ }
+
qemu_mutex_lock_iothread();
vm_start();
qemu_mutex_unlock_iothread();
@@ -43,8 +50,13 @@ static void colo_process_checkpoint(MigrationState *s)
/*TODO: COLO checkpoint savevm loop*/
+out:
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
+
+ if (s->rp_state.from_dst_file) {
+ qemu_fclose(s->rp_state.from_dst_file);
+ }
}
void migrate_start_colo_process(MigrationState *s)
@@ -63,8 +75,23 @@ void *colo_process_incoming_thread(void *opaque)
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
+ mis->to_src_file = qemu_file_get_return_path(mis->from_src_file);
+ if (!mis->to_src_file) {
+ error_report("colo incoming thread: Open QEMUFile to_src_file failed");
+ goto out;
+ }
+ /* Note: We set the fd to unblocked in migration incoming coroutine,
+ * But here we are in the colo incoming thread, so it is ok to set the
+ * fd back to blocked.
+ */
+ qemu_file_set_blocking(mis->from_src_file, true);
+
/* TODO: COLO checkpoint restore loop */
+out:
+ if (mis->to_src_file) {
+ qemu_fclose(mis->to_src_file);
+ }
migration_incoming_exit_colo();
return NULL;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 07/35] COLO: Implement colo checkpoint protocol
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (5 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 06/35] COLO/migration: Create a new communication path from destination to source zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 08/35] COLO: Add a new RunState RUN_STATE_COLO zhanghailiang
` (29 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
We need communications protocol of user-defined to control the checkpoint
process.
The new checkpoint request is started by Primary VM, and the interactive process
like below:
Checkpoint synchronizing points:
Primary Secondary
initial work
'checkpoint-ready' <-------------------- @
'checkpoint-request' @ -------------------->
Suspend (Only in hybrid mode)
'checkpoint-reply' <-------------------- @
Suspend&Save state
'vmstate-send' @ -------------------->
Send state Receive state
'vmstate-received' <-------------------- @
Release packets Load state
'vmstate-load' <-------------------- @
Resume Resume (Only in hybrid mode)
Start Comparing (Only in hybrid mode)
NOTE:
1) '@' who sends the message
2) Every sync-point is synchronized by two sides with only
one handshake(single direction) for low-latency.
If more strict synchronization is required, a opposite direction
sync-point should be added.
3) Since sync-points are single direction, the remote side may
go forward a lot when this side just receives the sync-point.
4) For now, we only support 'periodic' checkpoint, for which
the Secondary VM is not running, later we will support 'hybrid' mode.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v16:
- Rename 'colo_put/get[_check]_cmd()' to 'colo_send/receive[_check]_message()'
v14:
- Rename 'COLOCommand' to 'COLOMessage'. (Markus's suggestion)
- Add Reviewd-by tag
v13:
- Refactor colo command related helper functions, use 'Error **errp' parameter
instead of return value to indicate success or failure.
- Fix some other comments from Markus.
v12:
- Rename colo_ctl_put() to colo_put_cmd()
- Rename colo_ctl_get() to colo_get_check_cmd() and drop
the third parameter
- Rename colo_ctl_get_cmd() to colo_get_cmd()
- Remove useless 'invalid' member for COLOcommand enum.
v11:
- Add missing 'checkpoint-ready' communication in comment.
- Use parameter to return 'value' for colo_ctl_get() (Dave's suggestion)
- Fix trace for colo_ctl_get() to trace command and value both
v10:
- Rename enum COLOCmd to COLOCommand (Eric's suggestion).
- Remove unused 'ram-steal'
---
migration/colo.c | 201 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
qapi-schema.json | 25 +++++++
trace-events | 2 +
3 files changed, 226 insertions(+), 2 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index 202150b..027961b 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -15,6 +15,7 @@
#include "migration/colo.h"
#include "trace.h"
#include "qemu/error-report.h"
+#include "qapi/error.h"
bool colo_supported(void)
{
@@ -35,22 +36,147 @@ bool migration_incoming_in_colo_state(void)
return mis && (mis->state == MIGRATION_STATUS_COLO);
}
+static void colo_send_message(QEMUFile *f, COLOMessage msg,
+ Error **errp)
+{
+ int ret;
+
+ if (msg >= COLO_MESSAGE__MAX) {
+ error_setg(errp, "%s: Invalid message", __func__);
+ return;
+ }
+ qemu_put_be32(f, msg);
+ qemu_fflush(f);
+
+ ret = qemu_file_get_error(f);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Can't send COLO message");
+ }
+ trace_colo_send_message(COLOMessage_lookup[msg]);
+}
+
+static COLOMessage colo_receive_message(QEMUFile *f, Error **errp)
+{
+ COLOMessage msg;
+ int ret;
+
+ msg = qemu_get_be32(f);
+ ret = qemu_file_get_error(f);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Can't receive COLO message");
+ return msg;
+ }
+ if (msg >= COLO_MESSAGE__MAX) {
+ error_setg(errp, "%s: Invalid message", __func__);
+ return msg;
+ }
+ trace_colo_receive_message(COLOMessage_lookup[msg]);
+ return msg;
+}
+
+static void colo_receive_check_message(QEMUFile *f, COLOMessage expect_msg,
+ Error **errp)
+{
+ COLOMessage msg;
+ Error *local_err = NULL;
+
+ msg = colo_receive_message(f, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+ if (msg != expect_msg) {
+ error_setg(errp, "Unexpected COLO message %d, expected %d",
+ msg, expect_msg);
+ }
+}
+
+static int colo_do_checkpoint_transaction(MigrationState *s)
+{
+ Error *local_err = NULL;
+
+ colo_send_message(s->to_dst_file, COLO_MESSAGE_CHECKPOINT_REQUEST,
+ &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ colo_receive_check_message(s->rp_state.from_dst_file,
+ COLO_MESSAGE_CHECKPOINT_REPLY, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* TODO: suspend and save vm state to colo buffer */
+
+ colo_send_message(s->to_dst_file, COLO_MESSAGE_VMSTATE_SEND, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* TODO: send vmstate to Secondary */
+
+ colo_receive_check_message(s->rp_state.from_dst_file,
+ COLO_MESSAGE_VMSTATE_RECEIVED, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ colo_receive_check_message(s->rp_state.from_dst_file,
+ COLO_MESSAGE_VMSTATE_LOADED, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* TODO: resume Primary */
+
+ return 0;
+out:
+ if (local_err) {
+ error_report_err(local_err);
+ }
+ return -EINVAL;
+}
+
static void colo_process_checkpoint(MigrationState *s)
{
+ Error *local_err = NULL;
+ int ret;
+
s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
if (!s->rp_state.from_dst_file) {
error_report("Open QEMUFile from_dst_file failed");
goto out;
}
+ /*
+ * Wait for Secondary finish loading vm states and enter COLO
+ * restore.
+ */
+ colo_receive_check_message(s->rp_state.from_dst_file,
+ COLO_MESSAGE_CHECKPOINT_READY, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
qemu_mutex_lock_iothread();
vm_start();
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("stop", "run");
- /*TODO: COLO checkpoint savevm loop*/
+ while (s->state == MIGRATION_STATUS_COLO) {
+ /* start a colo checkpoint */
+ ret = colo_do_checkpoint_transaction(s);
+ if (ret < 0) {
+ goto out;
+ }
+ }
out:
+ /* Throw the unreported error message after exited from loop */
+ if (local_err) {
+ error_report_err(local_err);
+ }
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
@@ -68,9 +194,33 @@ void migrate_start_colo_process(MigrationState *s)
qemu_mutex_lock_iothread();
}
+static void colo_wait_handle_message(QEMUFile *f, int *checkpoint_request,
+ Error **errp)
+{
+ COLOMessage msg;
+ Error *local_err = NULL;
+
+ msg = colo_receive_message(f, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ switch (msg) {
+ case COLO_MESSAGE_CHECKPOINT_REQUEST:
+ *checkpoint_request = 1;
+ break;
+ default:
+ *checkpoint_request = 0;
+ error_setg(errp, "Got unknown COLO message: %d", msg);
+ break;
+ }
+}
+
void *colo_process_incoming_thread(void *opaque)
{
MigrationIncomingState *mis = opaque;
+ Error *local_err = NULL;
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
@@ -86,9 +236,56 @@ void *colo_process_incoming_thread(void *opaque)
*/
qemu_file_set_blocking(mis->from_src_file, true);
- /* TODO: COLO checkpoint restore loop */
+ colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
+ &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ while (mis->state == MIGRATION_STATUS_COLO) {
+ int request;
+
+ colo_wait_handle_message(mis->from_src_file, &request, &local_err);
+ if (local_err) {
+ goto out;
+ }
+ assert(request);
+ /* FIXME: This is unnecessary for periodic checkpoint mode */
+ colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_REPLY,
+ &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ colo_receive_check_message(mis->from_src_file,
+ COLO_MESSAGE_VMSTATE_SEND, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* TODO: read migration data into colo buffer */
+
+ colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_RECEIVED,
+ &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* TODO: load vm state */
+
+ colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_LOADED,
+ &local_err);
+ if (local_err) {
+ goto out;
+ }
+ }
out:
+ /* Throw the unreported error message after exited from loop */
+ if (local_err) {
+ error_report_err(local_err);
+ }
+
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
}
diff --git a/qapi-schema.json b/qapi-schema.json
index b8189e9..0f7706f 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -718,6 +718,31 @@
{ 'command': 'migrate-start-postcopy' }
##
+# @COLOMessage
+#
+# The message transmission between PVM and SVM
+#
+# @checkpoint-ready: SVM is ready for checkpointing
+#
+# @checkpoint-request: PVM tells SVM to prepare for new checkpointing
+#
+# @checkpoint-reply: SVM gets PVM's checkpoint request
+#
+# @vmstate-send: VM's state will be sent by PVM.
+#
+# @vmstate-size: The total size of VMstate.
+#
+# @vmstate-received: VM's state has been received by SVM.
+#
+# @vmstate-loaded: VM's state has been loaded by SVM.
+#
+# Since: 2.7
+##
+{ 'enum': 'COLOMessage',
+ 'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply',
+ 'vmstate-send', 'vmstate-size', 'vmstate-received',
+ 'vmstate-loaded' ] }
+
# @MouseInfo:
#
# Information about a mouse device.
diff --git a/trace-events b/trace-events
index b02ef90..2a630dd 100644
--- a/trace-events
+++ b/trace-events
@@ -1599,6 +1599,8 @@ postcopy_ram_incoming_cleanup_join(void) ""
# migration/colo.c
colo_vm_state_change(const char *old, const char *new) "Change '%s' => '%s'"
+colo_send_message(const char *msg) "Send '%s' message"
+colo_receive_message(const char *msg) "Receive '%s' message"
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 08/35] COLO: Add a new RunState RUN_STATE_COLO
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (6 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 07/35] COLO: Implement colo checkpoint protocol zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 09/35] QEMUSizedBuffer: Introduce two help functions for qsb zhanghailiang
` (28 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
Guest will enter this state when paused to save/restore VM state
under colo checkpoint.
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
qapi-schema.json | 5 ++++-
vl.c | 8 ++++++++
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/qapi-schema.json b/qapi-schema.json
index 0f7706f..db89a68 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -154,12 +154,15 @@
# @watchdog: the watchdog action is configured to pause and has been triggered
#
# @guest-panicked: guest has been panicked as a result of guest OS panic
+#
+# @colo: guest is paused to save/restore VM state under colo checkpoint (since
+# 2.7)
##
{ 'enum': 'RunState',
'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm',
'running', 'save-vm', 'shutdown', 'suspended', 'watchdog',
- 'guest-panicked' ] }
+ 'guest-panicked', 'colo' ] }
##
# @StatusInfo:
diff --git a/vl.c b/vl.c
index 50b3a48..f47ef3c 100644
--- a/vl.c
+++ b/vl.c
@@ -595,6 +595,7 @@ static const RunStateTransition runstate_transitions_def[] = {
{ RUN_STATE_INMIGRATE, RUN_STATE_FINISH_MIGRATE },
{ RUN_STATE_INMIGRATE, RUN_STATE_PRELAUNCH },
{ RUN_STATE_INMIGRATE, RUN_STATE_POSTMIGRATE },
+ { RUN_STATE_INMIGRATE, RUN_STATE_COLO },
{ RUN_STATE_INTERNAL_ERROR, RUN_STATE_PAUSED },
{ RUN_STATE_INTERNAL_ERROR, RUN_STATE_FINISH_MIGRATE },
@@ -607,6 +608,7 @@ static const RunStateTransition runstate_transitions_def[] = {
{ RUN_STATE_PAUSED, RUN_STATE_RUNNING },
{ RUN_STATE_PAUSED, RUN_STATE_FINISH_MIGRATE },
{ RUN_STATE_PAUSED, RUN_STATE_PRELAUNCH },
+ { RUN_STATE_PAUSED, RUN_STATE_COLO},
{ RUN_STATE_POSTMIGRATE, RUN_STATE_RUNNING },
{ RUN_STATE_POSTMIGRATE, RUN_STATE_FINISH_MIGRATE },
@@ -619,10 +621,13 @@ static const RunStateTransition runstate_transitions_def[] = {
{ RUN_STATE_FINISH_MIGRATE, RUN_STATE_RUNNING },
{ RUN_STATE_FINISH_MIGRATE, RUN_STATE_POSTMIGRATE },
{ RUN_STATE_FINISH_MIGRATE, RUN_STATE_PRELAUNCH },
+ { RUN_STATE_FINISH_MIGRATE, RUN_STATE_COLO},
{ RUN_STATE_RESTORE_VM, RUN_STATE_RUNNING },
{ RUN_STATE_RESTORE_VM, RUN_STATE_PRELAUNCH },
+ { RUN_STATE_COLO, RUN_STATE_RUNNING },
+
{ RUN_STATE_RUNNING, RUN_STATE_DEBUG },
{ RUN_STATE_RUNNING, RUN_STATE_INTERNAL_ERROR },
{ RUN_STATE_RUNNING, RUN_STATE_IO_ERROR },
@@ -633,6 +638,7 @@ static const RunStateTransition runstate_transitions_def[] = {
{ RUN_STATE_RUNNING, RUN_STATE_SHUTDOWN },
{ RUN_STATE_RUNNING, RUN_STATE_WATCHDOG },
{ RUN_STATE_RUNNING, RUN_STATE_GUEST_PANICKED },
+ { RUN_STATE_RUNNING, RUN_STATE_COLO},
{ RUN_STATE_SAVE_VM, RUN_STATE_RUNNING },
@@ -645,10 +651,12 @@ static const RunStateTransition runstate_transitions_def[] = {
{ RUN_STATE_SUSPENDED, RUN_STATE_RUNNING },
{ RUN_STATE_SUSPENDED, RUN_STATE_FINISH_MIGRATE },
{ RUN_STATE_SUSPENDED, RUN_STATE_PRELAUNCH },
+ { RUN_STATE_SUSPENDED, RUN_STATE_COLO},
{ RUN_STATE_WATCHDOG, RUN_STATE_RUNNING },
{ RUN_STATE_WATCHDOG, RUN_STATE_FINISH_MIGRATE },
{ RUN_STATE_WATCHDOG, RUN_STATE_PRELAUNCH },
+ { RUN_STATE_WATCHDOG, RUN_STATE_COLO},
{ RUN_STATE_GUEST_PANICKED, RUN_STATE_RUNNING },
{ RUN_STATE_GUEST_PANICKED, RUN_STATE_FINISH_MIGRATE },
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 09/35] QEMUSizedBuffer: Introduce two help functions for qsb
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (7 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 08/35] COLO: Add a new RunState RUN_STATE_COLO zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 10/35] COLO: Save PVM state to secondary side when do checkpoint zhanghailiang
` (27 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
Introduce two new QEMUSizedBuffer APIs which will be used by COLO to buffer
VM state:
One is qsb_put_buffer(), which put the content of a given QEMUSizedBuffer
into QEMUFile, this is used to send buffered VM state to secondary.
Another is qsb_fill_buffer(), read 'size' bytes of data from the file into
qsb, this is used to get VM state from socket into a buffer.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v11:
- size_t'ify these two help functions (Dave's suggestion)
---
include/migration/qemu-file.h | 3 ++-
migration/qemu-file-buf.c | 61 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 63 insertions(+), 1 deletion(-)
diff --git a/include/migration/qemu-file.h b/include/migration/qemu-file.h
index 3f6b4ed..4bbc9e8 100644
--- a/include/migration/qemu-file.h
+++ b/include/migration/qemu-file.h
@@ -149,7 +149,8 @@ ssize_t qsb_get_buffer(const QEMUSizedBuffer *, off_t start, size_t count,
uint8_t *buf);
ssize_t qsb_write_at(QEMUSizedBuffer *qsb, const uint8_t *buf,
off_t pos, size_t count);
-
+void qsb_put_buffer(QEMUFile *f, QEMUSizedBuffer *qsb, size_t size);
+size_t qsb_fill_buffer(QEMUSizedBuffer *qsb, QEMUFile *f, size_t size);
/*
* For use on files opened with qemu_bufopen
diff --git a/migration/qemu-file-buf.c b/migration/qemu-file-buf.c
index 7b8e78e..7801780 100644
--- a/migration/qemu-file-buf.c
+++ b/migration/qemu-file-buf.c
@@ -367,6 +367,67 @@ ssize_t qsb_write_at(QEMUSizedBuffer *qsb, const uint8_t *source,
return count;
}
+/**
+ * Put the content of a given QEMUSizedBuffer into QEMUFile.
+ *
+ * @f: A QEMUFile
+ * @qsb: A QEMUSizedBuffer
+ * @size: size of content to write
+ */
+void qsb_put_buffer(QEMUFile *f, QEMUSizedBuffer *qsb, size_t size)
+{
+ size_t l;
+ int i;
+
+ for (i = 0; i < qsb->n_iov && size > 0; i++) {
+ l = MIN(qsb->iov[i].iov_len, size);
+ qemu_put_buffer(f, qsb->iov[i].iov_base, l);
+ size -= l;
+ }
+}
+
+/*
+ * Read 'size' bytes of data from the file into qsb.
+ * always fill from pos 0 and used after qsb_create().
+ *
+ * It will return size bytes unless there was an error, in which case it will
+ * return as many as it managed to read (assuming blocking fd's which
+ * all current QEMUFile are)
+ */
+size_t qsb_fill_buffer(QEMUSizedBuffer *qsb, QEMUFile *f, size_t size)
+{
+ ssize_t rc = qsb_grow(qsb, size);
+ ssize_t pending = size;
+ int i;
+ uint8_t *buf = NULL;
+
+ qsb->used = 0;
+
+ if (rc < 0) {
+ return rc;
+ }
+
+ for (i = 0; i < qsb->n_iov && pending > 0; i++) {
+ size_t doneone = 0;
+ /* read until iov full */
+ while (doneone < qsb->iov[i].iov_len && pending > 0) {
+ size_t readone = 0;
+
+ buf = qsb->iov[i].iov_base;
+ readone = qemu_get_buffer(f, buf,
+ MIN(qsb->iov[i].iov_len - doneone, pending));
+ if (readone == 0) {
+ return qsb->used;
+ }
+ buf += readone;
+ doneone += readone;
+ pending -= readone;
+ qsb->used += readone;
+ }
+ }
+ return qsb->used;
+}
+
typedef struct QEMUBuffer {
QEMUSizedBuffer *qsb;
QEMUFile *file;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 10/35] COLO: Save PVM state to secondary side when do checkpoint
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (8 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 09/35] QEMUSizedBuffer: Introduce two help functions for qsb zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 11/35] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily zhanghailiang
` (26 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
The main process of checkpoint is to synchronize SVM with PVM.
VM's state includes ram and device state. So we will migrate PVM's
state to SVM when do checkpoint, just like migration does.
We will cache PVM's state in slave, we use QEMUSizedBuffer
to store the data, we need to know the size of VM state, so in master,
we use qsb to store VM state temporarily, get the data size by call qsb_get_length()
and then migrate the data to the qsb in the secondary side.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v16:
- Rename colo_put_cmd_value() to colo_send_message_value()
v13:
- Refactor colo_put_cmd_value() to use 'Error **errp' to indicate success
or failure.
v12:
- Replace the old colo_ctl_get() with the new helper function colo_put_cmd_value()
v11:
- Add Reviewed-by tag
---
migration/colo.c | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++-----
migration/ram.c | 39 ++++++++++++++++++------
2 files changed, 114 insertions(+), 17 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index 027961b..19bffea 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -17,6 +17,9 @@
#include "qemu/error-report.h"
#include "qapi/error.h"
+/* colo buffer */
+#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
+
bool colo_supported(void)
{
return true;
@@ -55,6 +58,27 @@ static void colo_send_message(QEMUFile *f, COLOMessage msg,
trace_colo_send_message(COLOMessage_lookup[msg]);
}
+static void colo_send_message_value(QEMUFile *f, COLOMessage msg,
+ uint64_t value, Error **errp)
+{
+ Error *local_err = NULL;
+ int ret;
+
+ colo_send_message(f, msg, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+ qemu_put_be64(f, value);
+ qemu_fflush(f);
+
+ ret = qemu_file_get_error(f);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Failed to send value for message:%s",
+ COLOMessage_lookup[msg]);
+ }
+}
+
static COLOMessage colo_receive_message(QEMUFile *f, Error **errp)
{
COLOMessage msg;
@@ -91,9 +115,13 @@ static void colo_receive_check_message(QEMUFile *f, COLOMessage expect_msg,
}
}
-static int colo_do_checkpoint_transaction(MigrationState *s)
+static int colo_do_checkpoint_transaction(MigrationState *s,
+ QEMUSizedBuffer *buffer)
{
+ QEMUFile *trans = NULL;
+ size_t size;
Error *local_err = NULL;
+ int ret = -1;
colo_send_message(s->to_dst_file, COLO_MESSAGE_CHECKPOINT_REQUEST,
&local_err);
@@ -106,15 +134,48 @@ static int colo_do_checkpoint_transaction(MigrationState *s)
if (local_err) {
goto out;
}
+ /* Reset colo buffer and open it for write */
+ qsb_set_length(buffer, 0);
+ trans = qemu_bufopen("w", buffer);
+ if (!trans) {
+ error_report("Open colo buffer for write failed");
+ goto out;
+ }
- /* TODO: suspend and save vm state to colo buffer */
+ qemu_mutex_lock_iothread();
+ vm_stop_force_state(RUN_STATE_COLO);
+ qemu_mutex_unlock_iothread();
+ trace_colo_vm_state_change("run", "stop");
+
+ /* Disable block migration */
+ s->params.blk = 0;
+ s->params.shared = 0;
+ qemu_savevm_state_header(trans);
+ qemu_savevm_state_begin(trans, &s->params);
+ qemu_mutex_lock_iothread();
+ qemu_savevm_state_complete_precopy(trans, false);
+ qemu_mutex_unlock_iothread();
+
+ qemu_fflush(trans);
colo_send_message(s->to_dst_file, COLO_MESSAGE_VMSTATE_SEND, &local_err);
if (local_err) {
goto out;
}
+ /* we send the total size of the vmstate first */
+ size = qsb_get_length(buffer);
+ colo_send_message_value(s->to_dst_file, COLO_MESSAGE_VMSTATE_SIZE,
+ size, &local_err);
+ if (local_err) {
+ goto out;
+ }
- /* TODO: send vmstate to Secondary */
+ qsb_put_buffer(s->to_dst_file, buffer, size);
+ qemu_fflush(s->to_dst_file);
+ ret = qemu_file_get_error(s->to_dst_file);
+ if (ret < 0) {
+ goto out;
+ }
colo_receive_check_message(s->rp_state.from_dst_file,
COLO_MESSAGE_VMSTATE_RECEIVED, &local_err);
@@ -128,18 +189,26 @@ static int colo_do_checkpoint_transaction(MigrationState *s)
goto out;
}
- /* TODO: resume Primary */
+ ret = 0;
+ /* Resume primary guest */
+ qemu_mutex_lock_iothread();
+ vm_start();
+ qemu_mutex_unlock_iothread();
+ trace_colo_vm_state_change("stop", "run");
- return 0;
out:
if (local_err) {
error_report_err(local_err);
}
- return -EINVAL;
+ if (trans) {
+ qemu_fclose(trans);
+ }
+ return ret;
}
static void colo_process_checkpoint(MigrationState *s)
{
+ QEMUSizedBuffer *buffer = NULL;
Error *local_err = NULL;
int ret;
@@ -159,6 +228,12 @@ static void colo_process_checkpoint(MigrationState *s)
goto out;
}
+ buffer = qsb_create(NULL, COLO_BUFFER_BASE_SIZE);
+ if (buffer == NULL) {
+ error_report("Failed to allocate colo buffer!");
+ goto out;
+ }
+
qemu_mutex_lock_iothread();
vm_start();
qemu_mutex_unlock_iothread();
@@ -166,7 +241,7 @@ static void colo_process_checkpoint(MigrationState *s)
while (s->state == MIGRATION_STATUS_COLO) {
/* start a colo checkpoint */
- ret = colo_do_checkpoint_transaction(s);
+ ret = colo_do_checkpoint_transaction(s, buffer);
if (ret < 0) {
goto out;
}
@@ -180,6 +255,9 @@ out:
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
+ qsb_free(buffer);
+ buffer = NULL;
+
if (s->rp_state.from_dst_file) {
qemu_fclose(s->rp_state.from_dst_file);
}
diff --git a/migration/ram.c b/migration/ram.c
index 3f05738..cbe8421 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -41,6 +41,7 @@
#include "trace.h"
#include "exec/ram_addr.h"
#include "qemu/rcu_queue.h"
+#include "migration/colo.h"
#ifdef DEBUG_MIGRATION_RAM
#define DPRINTF(fmt, ...) \
@@ -1874,16 +1875,8 @@ err:
return ret;
}
-
-/* Each of ram_save_setup, ram_save_iterate and ram_save_complete has
- * long-running RCU critical section. When rcu-reclaims in the code
- * start to become numerous it will be necessary to reduce the
- * granularity of these critical sections.
- */
-
-static int ram_save_setup(QEMUFile *f, void *opaque)
+static int ram_save_init_globals(void)
{
- RAMBlock *block;
int64_t ram_bitmap_pages; /* Size of bitmap in pages, including gaps */
dirty_rate_high_cnt = 0;
@@ -1949,6 +1942,31 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
migration_bitmap_sync();
qemu_mutex_unlock_ramlist();
qemu_mutex_unlock_iothread();
+ rcu_read_unlock();
+
+ return 0;
+}
+
+/* Each of ram_save_setup, ram_save_iterate and ram_save_complete has
+ * long-running RCU critical section. When rcu-reclaims in the code
+ * start to become numerous it will be necessary to reduce the
+ * granularity of these critical sections.
+ */
+
+static int ram_save_setup(QEMUFile *f, void *opaque)
+{
+ RAMBlock *block;
+
+ /*
+ * migration has already setup the bitmap, reuse it.
+ */
+ if (!migration_in_colo_state()) {
+ if (ram_save_init_globals() < 0) {
+ return -1;
+ }
+ }
+
+ rcu_read_lock();
qemu_put_be64(f, ram_bytes_total() | RAM_SAVE_FLAG_MEM_SIZE);
@@ -2050,7 +2068,8 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
while (true) {
int pages;
- pages = ram_find_and_save_block(f, true, &bytes_transferred);
+ pages = ram_find_and_save_block(f, !migration_in_colo_state(),
+ &bytes_transferred);
/* no more blocks to sent */
if (pages == 0) {
break;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 11/35] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (9 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 10/35] COLO: Save PVM state to secondary side when do checkpoint zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 12/35] ram/COLO: Record the dirty pages that SVM received zhanghailiang
` (25 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
We should not load PVM's state directly into SVM, because there maybe some
errors happen when SVM is receving data, which will break SVM.
We need to ensure receving all data before load the state into SVM. We use
an extra memory to cache these data (PVM's ram). The ram cache in secondary side
is initially the same as SVM/PVM's memory. And in the process of checkpoint,
we cache the dirty pages of PVM into this ram cache firstly, so this ram cache
always the same as PVM's memory at every checkpoint, then we flush this cached ram
to SVM after we receive all PVM's state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Fix minor error in error_report (Dave's comment)
- Add Reviewed-by tag
v11:
- Rename 'host_cache' to 'colo_cache' (Dave's suggestion)
v10:
- Split the process of dirty pages recording into a new patch
---
include/exec/ram_addr.h | 1 +
include/migration/migration.h | 4 +++
migration/colo.c | 11 +++++++
migration/ram.c | 73 ++++++++++++++++++++++++++++++++++++++++++-
4 files changed, 88 insertions(+), 1 deletion(-)
diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
index 5adf7a4..6295562 100644
--- a/include/exec/ram_addr.h
+++ b/include/exec/ram_addr.h
@@ -26,6 +26,7 @@ struct RAMBlock {
struct rcu_head rcu;
struct MemoryRegion *mr;
uint8_t *host;
+ uint8_t *colo_cache; /* For colo, VM's ram cache */
ram_addr_t offset;
ram_addr_t used_length;
ram_addr_t max_length;
diff --git a/include/migration/migration.h b/include/migration/migration.h
index 0dcb2bd..d7e6e81 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -337,4 +337,8 @@ int ram_save_queue_pages(MigrationState *ms, const char *rbname,
PostcopyState postcopy_state_get(void);
/* Set the state and return the old state */
PostcopyState postcopy_state_set(PostcopyState new_state);
+
+/* ram cache */
+int colo_init_ram_cache(void);
+void colo_release_ram_cache(void);
#endif
diff --git a/migration/colo.c b/migration/colo.c
index 19bffea..fb2b705 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -299,6 +299,7 @@ void *colo_process_incoming_thread(void *opaque)
{
MigrationIncomingState *mis = opaque;
Error *local_err = NULL;
+ int ret;
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
@@ -314,6 +315,12 @@ void *colo_process_incoming_thread(void *opaque)
*/
qemu_file_set_blocking(mis->from_src_file, true);
+ ret = colo_init_ram_cache();
+ if (ret < 0) {
+ error_report("Failed to initialize ram cache");
+ goto out;
+ }
+
colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
&local_err);
if (local_err) {
@@ -364,6 +371,10 @@ out:
error_report_err(local_err);
}
+ qemu_mutex_lock_iothread();
+ colo_release_ram_cache();
+ qemu_mutex_unlock_iothread();
+
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
}
diff --git a/migration/ram.c b/migration/ram.c
index cbe8421..85e2378 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -225,6 +225,7 @@ static RAMBlock *last_sent_block;
static ram_addr_t last_offset;
static QemuMutex migration_bitmap_mutex;
static uint64_t migration_dirty_pages;
+static bool ram_cache_enable;
static uint32_t last_version;
static bool ram_bulk_stage;
@@ -2192,6 +2193,20 @@ static inline void *host_from_ram_block_offset(RAMBlock *block,
return block->host + offset;
}
+static inline void *colo_cache_from_block_offset(RAMBlock *block,
+ ram_addr_t offset)
+{
+ if (!offset_in_ramblock(block, offset)) {
+ return NULL;
+ }
+ if (!block->colo_cache) {
+ error_report("%s: colo_cache is NULL in block :%s",
+ __func__, block->idstr);
+ return NULL;
+ }
+ return block->colo_cache + offset;
+}
+
/*
* If a page (or a whole RDMA chunk) has been
* determined to be zero, then zap it.
@@ -2468,7 +2483,12 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
RAMBlock *block = ram_block_from_stream(f, flags);
- host = host_from_ram_block_offset(block, addr);
+ /* After going into COLO, we should load the Page into colo_cache */
+ if (ram_cache_enable) {
+ host = colo_cache_from_block_offset(block, addr);
+ } else {
+ host = host_from_ram_block_offset(block, addr);
+ }
if (!host) {
error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
ret = -EINVAL;
@@ -2563,6 +2583,57 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
return ret;
}
+/*
+ * colo cache: this is for secondary VM, we cache the whole
+ * memory of the secondary VM, it will be called after first migration.
+ */
+int colo_init_ram_cache(void)
+{
+ RAMBlock *block;
+
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ block->colo_cache = qemu_anon_ram_alloc(block->used_length, NULL);
+ if (!block->colo_cache) {
+ error_report("%s: Can't alloc memory for COLO cache of block %s,"
+ "size 0x" RAM_ADDR_FMT, __func__, block->idstr,
+ block->used_length);
+ goto out_locked;
+ }
+ memcpy(block->colo_cache, block->host, block->used_length);
+ }
+ rcu_read_unlock();
+ ram_cache_enable = true;
+ return 0;
+
+out_locked:
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ if (block->colo_cache) {
+ qemu_anon_ram_free(block->colo_cache, block->used_length);
+ block->colo_cache = NULL;
+ }
+ }
+
+ rcu_read_unlock();
+ return -errno;
+}
+
+void colo_release_ram_cache(void)
+{
+ RAMBlock *block;
+
+ ram_cache_enable = false;
+
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ if (block->colo_cache) {
+ qemu_anon_ram_free(block->colo_cache, block->used_length);
+ block->colo_cache = NULL;
+ }
+ }
+ rcu_read_unlock();
+}
+
static SaveVMHandlers savevm_ram_handlers = {
.save_live_setup = ram_save_setup,
.save_live_iterate = ram_save_iterate,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 12/35] ram/COLO: Record the dirty pages that SVM received
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (10 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 11/35] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 13/35] COLO: Load VMState into qsb before restore it zhanghailiang
` (24 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
We record the address of the dirty pages that received,
it will help flushing pages that cached into SVM.
We record them by re-using migration dirty bitmap.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v16:
- Use the new wrapper memory_region_get_ram_addr() modified in commit 7ebb2745
v12:
- Add Reviewed-by tag
v11:
- Split a new helper function from original
host_from_stream_offset() (Dave's suggestion)
- Only do recording work in this patch
v10:
- New patch split from v9's patch 13
- Rebase to master to use 'migration_bitmap_rcu'
---
migration/ram.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/migration/ram.c b/migration/ram.c
index 85e2378..0af43d4 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2196,6 +2196,9 @@ static inline void *host_from_ram_block_offset(RAMBlock *block,
static inline void *colo_cache_from_block_offset(RAMBlock *block,
ram_addr_t offset)
{
+ unsigned long *bitmap;
+ long k;
+
if (!offset_in_ramblock(block, offset)) {
return NULL;
}
@@ -2204,6 +2207,17 @@ static inline void *colo_cache_from_block_offset(RAMBlock *block,
__func__, block->idstr);
return NULL;
}
+
+ k = (memory_region_get_ram_addr(block->mr) + offset) >> TARGET_PAGE_BITS;
+ bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
+ /*
+ * During colo checkpoint, we need bitmap of these migrated pages.
+ * It help us to decide which pages in ram cache should be flushed
+ * into VM's RAM later.
+ */
+ if (!test_and_set_bit(k, bitmap)) {
+ migration_dirty_pages++;
+ }
return block->colo_cache + offset;
}
@@ -2590,6 +2604,7 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
int colo_init_ram_cache(void)
{
RAMBlock *block;
+ int64_t ram_cache_pages = last_ram_offset() >> TARGET_PAGE_BITS;
rcu_read_lock();
QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
@@ -2604,6 +2619,15 @@ int colo_init_ram_cache(void)
}
rcu_read_unlock();
ram_cache_enable = true;
+ /*
+ * Record the dirty pages that sent by PVM, we use this dirty bitmap together
+ * with to decide which page in cache should be flushed into SVM's RAM. Here
+ * we use the same name 'migration_bitmap_rcu' as for migration.
+ */
+ migration_bitmap_rcu = g_new0(struct BitmapRcu, 1);
+ migration_bitmap_rcu->bmap = bitmap_new(ram_cache_pages);
+ migration_dirty_pages = 0;
+
return 0;
out_locked:
@@ -2621,9 +2645,15 @@ out_locked:
void colo_release_ram_cache(void)
{
RAMBlock *block;
+ struct BitmapRcu *bitmap = migration_bitmap_rcu;
ram_cache_enable = false;
+ atomic_rcu_set(&migration_bitmap_rcu, NULL);
+ if (bitmap) {
+ call_rcu(bitmap, migration_bitmap_free, rcu);
+ }
+
rcu_read_lock();
QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (block->colo_cache) {
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 13/35] COLO: Load VMState into qsb before restore it
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (11 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 12/35] ram/COLO: Record the dirty pages that SVM received zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-22 10:12 ` Dr. David Alan Gilbert
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 14/35] COLO: Flush PVM's cached RAM into SVM's memory zhanghailiang
` (23 subsequent siblings)
36 siblings, 1 reply; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
We should not destroy the state of SVM (Secondary VM) until we receive the whole
state from the PVM (Primary VM), in case the primary fails in the middle of sending
the state, so, here we cache the device state in Secondary before restore it.
Besides, we should call qemu_system_reset() before load VM state,
which can ensure the data is intact.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v16:
- Rename colo_get_cmd_value() to colo_receive_mesage_value();
v13:
- Fix the define of colo_get_cmd_value() to use 'Error **errp' instead of
return value.
v12:
- Use the new helper colo_get_cmd_value() instead of colo_ctl_get()
---
migration/colo.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 72 insertions(+), 2 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index fb2b705..52a2c3e 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -115,6 +115,28 @@ static void colo_receive_check_message(QEMUFile *f, COLOMessage expect_msg,
}
}
+static uint64_t colo_receive_message_value(QEMUFile *f, uint32_t expect_msg,
+ Error **errp)
+{
+ Error *local_err = NULL;
+ uint64_t value;
+ int ret;
+
+ colo_receive_check_message(f, expect_msg, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return 0;
+ }
+
+ value = qemu_get_be64(f);
+ ret = qemu_file_get_error(f);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Failed to get value for COLO message: %s",
+ COLOMessage_lookup[expect_msg]);
+ }
+ return value;
+}
+
static int colo_do_checkpoint_transaction(MigrationState *s,
QEMUSizedBuffer *buffer)
{
@@ -298,6 +320,10 @@ static void colo_wait_handle_message(QEMUFile *f, int *checkpoint_request,
void *colo_process_incoming_thread(void *opaque)
{
MigrationIncomingState *mis = opaque;
+ QEMUFile *fb = NULL;
+ QEMUSizedBuffer *buffer = NULL; /* Cache incoming device state */
+ uint64_t total_size;
+ uint64_t value;
Error *local_err = NULL;
int ret;
@@ -321,6 +347,12 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
+ buffer = qsb_create(NULL, COLO_BUFFER_BASE_SIZE);
+ if (buffer == NULL) {
+ error_report("Failed to allocate colo buffer!");
+ goto out;
+ }
+
colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
&local_err);
if (local_err) {
@@ -348,7 +380,21 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
- /* TODO: read migration data into colo buffer */
+ /* read the VM state total size first */
+ value = colo_receive_message_value(mis->from_src_file,
+ COLO_MESSAGE_VMSTATE_SIZE, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* read vm device state into colo buffer */
+ total_size = qsb_fill_buffer(buffer, mis->from_src_file, value);
+ if (total_size != value) {
+ error_report("Got %lu VMState data, less than expected %lu",
+ total_size, value);
+ ret = -EINVAL;
+ goto out;
+ }
colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_RECEIVED,
&local_err);
@@ -356,13 +402,32 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
- /* TODO: load vm state */
+ /* open colo buffer for read */
+ fb = qemu_bufopen("r", buffer);
+ if (!fb) {
+ error_report("Can't open colo buffer for read");
+ goto out;
+ }
+
+ qemu_mutex_lock_iothread();
+ qemu_system_reset(VMRESET_SILENT);
+ if (qemu_loadvm_state(fb) < 0) {
+ error_report("COLO: loadvm failed");
+ qemu_mutex_unlock_iothread();
+ goto out;
+ }
+ qemu_mutex_unlock_iothread();
+
+ /* TODO: flush vm state */
colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_LOADED,
&local_err);
if (local_err) {
goto out;
}
+
+ qemu_fclose(fb);
+ fb = NULL;
}
out:
@@ -371,6 +436,11 @@ out:
error_report_err(local_err);
}
+ if (fb) {
+ qemu_fclose(fb);
+ }
+ qsb_free(buffer);
+
qemu_mutex_lock_iothread();
colo_release_ram_cache();
qemu_mutex_unlock_iothread();
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 13/35] COLO: Load VMState into qsb before restore it
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 13/35] COLO: Load VMState into qsb before restore it zhanghailiang
@ 2016-04-22 10:12 ` Dr. David Alan Gilbert
2016-04-25 9:17 ` Hailiang Zhang
0 siblings, 1 reply; 54+ messages in thread
From: Dr. David Alan Gilbert @ 2016-04-22 10:12 UTC (permalink / raw)
To: zhanghailiang
Cc: qemu-devel, amit.shah, quintela, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru
* zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
> We should not destroy the state of SVM (Secondary VM) until we receive the whole
> state from the PVM (Primary VM), in case the primary fails in the middle of sending
> the state, so, here we cache the device state in Secondary before restore it.
>
> Besides, we should call qemu_system_reset() before load VM state,
> which can ensure the data is intact.
You'll need to figure out how to merge this with Dan Berrange's TLS series
( http://lists.gnu.org/archive/html/qemu-devel/2016-03/msg04591.html );
in particular note that he's killed off the QEMUSizedBuffer but now has
a QIOChannelBuffer.
I did review his full set last month, so I think it's ready to go.
Dave
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> v16:
> - Rename colo_get_cmd_value() to colo_receive_mesage_value();
> v13:
> - Fix the define of colo_get_cmd_value() to use 'Error **errp' instead of
> return value.
> v12:
> - Use the new helper colo_get_cmd_value() instead of colo_ctl_get()
> ---
> migration/colo.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 72 insertions(+), 2 deletions(-)
>
> diff --git a/migration/colo.c b/migration/colo.c
> index fb2b705..52a2c3e 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -115,6 +115,28 @@ static void colo_receive_check_message(QEMUFile *f, COLOMessage expect_msg,
> }
> }
>
> +static uint64_t colo_receive_message_value(QEMUFile *f, uint32_t expect_msg,
> + Error **errp)
> +{
> + Error *local_err = NULL;
> + uint64_t value;
> + int ret;
> +
> + colo_receive_check_message(f, expect_msg, &local_err);
> + if (local_err) {
> + error_propagate(errp, local_err);
> + return 0;
> + }
> +
> + value = qemu_get_be64(f);
> + ret = qemu_file_get_error(f);
> + if (ret < 0) {
> + error_setg_errno(errp, -ret, "Failed to get value for COLO message: %s",
> + COLOMessage_lookup[expect_msg]);
> + }
> + return value;
> +}
> +
> static int colo_do_checkpoint_transaction(MigrationState *s,
> QEMUSizedBuffer *buffer)
> {
> @@ -298,6 +320,10 @@ static void colo_wait_handle_message(QEMUFile *f, int *checkpoint_request,
> void *colo_process_incoming_thread(void *opaque)
> {
> MigrationIncomingState *mis = opaque;
> + QEMUFile *fb = NULL;
> + QEMUSizedBuffer *buffer = NULL; /* Cache incoming device state */
> + uint64_t total_size;
> + uint64_t value;
> Error *local_err = NULL;
> int ret;
>
> @@ -321,6 +347,12 @@ void *colo_process_incoming_thread(void *opaque)
> goto out;
> }
>
> + buffer = qsb_create(NULL, COLO_BUFFER_BASE_SIZE);
> + if (buffer == NULL) {
> + error_report("Failed to allocate colo buffer!");
> + goto out;
> + }
> +
> colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
> &local_err);
> if (local_err) {
> @@ -348,7 +380,21 @@ void *colo_process_incoming_thread(void *opaque)
> goto out;
> }
>
> - /* TODO: read migration data into colo buffer */
> + /* read the VM state total size first */
> + value = colo_receive_message_value(mis->from_src_file,
> + COLO_MESSAGE_VMSTATE_SIZE, &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + /* read vm device state into colo buffer */
> + total_size = qsb_fill_buffer(buffer, mis->from_src_file, value);
> + if (total_size != value) {
> + error_report("Got %lu VMState data, less than expected %lu",
> + total_size, value);
> + ret = -EINVAL;
> + goto out;
> + }
>
> colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_RECEIVED,
> &local_err);
> @@ -356,13 +402,32 @@ void *colo_process_incoming_thread(void *opaque)
> goto out;
> }
>
> - /* TODO: load vm state */
> + /* open colo buffer for read */
> + fb = qemu_bufopen("r", buffer);
> + if (!fb) {
> + error_report("Can't open colo buffer for read");
> + goto out;
> + }
> +
> + qemu_mutex_lock_iothread();
> + qemu_system_reset(VMRESET_SILENT);
> + if (qemu_loadvm_state(fb) < 0) {
> + error_report("COLO: loadvm failed");
> + qemu_mutex_unlock_iothread();
> + goto out;
> + }
> + qemu_mutex_unlock_iothread();
> +
> + /* TODO: flush vm state */
>
> colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_LOADED,
> &local_err);
> if (local_err) {
> goto out;
> }
> +
> + qemu_fclose(fb);
> + fb = NULL;
> }
>
> out:
> @@ -371,6 +436,11 @@ out:
> error_report_err(local_err);
> }
>
> + if (fb) {
> + qemu_fclose(fb);
> + }
> + qsb_free(buffer);
> +
> qemu_mutex_lock_iothread();
> colo_release_ram_cache();
> qemu_mutex_unlock_iothread();
> --
> 1.8.3.1
>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 13/35] COLO: Load VMState into qsb before restore it
2016-04-22 10:12 ` Dr. David Alan Gilbert
@ 2016-04-25 9:17 ` Hailiang Zhang
0 siblings, 0 replies; 54+ messages in thread
From: Hailiang Zhang @ 2016-04-25 9:17 UTC (permalink / raw)
To: Dr. David Alan Gilbert
Cc: peter.huangpeng, qemu-devel, amit.shah, quintela, eblake,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru
On 2016/4/22 18:12, Dr. David Alan Gilbert wrote:
> * zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
>> We should not destroy the state of SVM (Secondary VM) until we receive the whole
>> state from the PVM (Primary VM), in case the primary fails in the middle of sending
>> the state, so, here we cache the device state in Secondary before restore it.
>>
>> Besides, we should call qemu_system_reset() before load VM state,
>> which can ensure the data is intact.
>
> You'll need to figure out how to merge this with Dan Berrange's TLS series
> ( http://lists.gnu.org/archive/html/qemu-devel/2016-03/msg04591.html );
> in particular note that he's killed off the QEMUSizedBuffer but now has
> a QIOChannelBuffer.
>
> I did review his full set last month, so I think it's ready to go.
Yes, i already noticed it, if that series merged first, we need to
do some other rebase works, i will look at it later.
Thanks,
Hailiang
> Dave
>
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
>> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
>> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
>> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
>> ---
>> v16:
>> - Rename colo_get_cmd_value() to colo_receive_mesage_value();
>> v13:
>> - Fix the define of colo_get_cmd_value() to use 'Error **errp' instead of
>> return value.
>> v12:
>> - Use the new helper colo_get_cmd_value() instead of colo_ctl_get()
>> ---
>> migration/colo.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 72 insertions(+), 2 deletions(-)
>>
>> diff --git a/migration/colo.c b/migration/colo.c
>> index fb2b705..52a2c3e 100644
>> --- a/migration/colo.c
>> +++ b/migration/colo.c
>> @@ -115,6 +115,28 @@ static void colo_receive_check_message(QEMUFile *f, COLOMessage expect_msg,
>> }
>> }
>>
>> +static uint64_t colo_receive_message_value(QEMUFile *f, uint32_t expect_msg,
>> + Error **errp)
>> +{
>> + Error *local_err = NULL;
>> + uint64_t value;
>> + int ret;
>> +
>> + colo_receive_check_message(f, expect_msg, &local_err);
>> + if (local_err) {
>> + error_propagate(errp, local_err);
>> + return 0;
>> + }
>> +
>> + value = qemu_get_be64(f);
>> + ret = qemu_file_get_error(f);
>> + if (ret < 0) {
>> + error_setg_errno(errp, -ret, "Failed to get value for COLO message: %s",
>> + COLOMessage_lookup[expect_msg]);
>> + }
>> + return value;
>> +}
>> +
>> static int colo_do_checkpoint_transaction(MigrationState *s,
>> QEMUSizedBuffer *buffer)
>> {
>> @@ -298,6 +320,10 @@ static void colo_wait_handle_message(QEMUFile *f, int *checkpoint_request,
>> void *colo_process_incoming_thread(void *opaque)
>> {
>> MigrationIncomingState *mis = opaque;
>> + QEMUFile *fb = NULL;
>> + QEMUSizedBuffer *buffer = NULL; /* Cache incoming device state */
>> + uint64_t total_size;
>> + uint64_t value;
>> Error *local_err = NULL;
>> int ret;
>>
>> @@ -321,6 +347,12 @@ void *colo_process_incoming_thread(void *opaque)
>> goto out;
>> }
>>
>> + buffer = qsb_create(NULL, COLO_BUFFER_BASE_SIZE);
>> + if (buffer == NULL) {
>> + error_report("Failed to allocate colo buffer!");
>> + goto out;
>> + }
>> +
>> colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
>> &local_err);
>> if (local_err) {
>> @@ -348,7 +380,21 @@ void *colo_process_incoming_thread(void *opaque)
>> goto out;
>> }
>>
>> - /* TODO: read migration data into colo buffer */
>> + /* read the VM state total size first */
>> + value = colo_receive_message_value(mis->from_src_file,
>> + COLO_MESSAGE_VMSTATE_SIZE, &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + /* read vm device state into colo buffer */
>> + total_size = qsb_fill_buffer(buffer, mis->from_src_file, value);
>> + if (total_size != value) {
>> + error_report("Got %lu VMState data, less than expected %lu",
>> + total_size, value);
>> + ret = -EINVAL;
>> + goto out;
>> + }
>>
>> colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_RECEIVED,
>> &local_err);
>> @@ -356,13 +402,32 @@ void *colo_process_incoming_thread(void *opaque)
>> goto out;
>> }
>>
>> - /* TODO: load vm state */
>> + /* open colo buffer for read */
>> + fb = qemu_bufopen("r", buffer);
>> + if (!fb) {
>> + error_report("Can't open colo buffer for read");
>> + goto out;
>> + }
>> +
>> + qemu_mutex_lock_iothread();
>> + qemu_system_reset(VMRESET_SILENT);
>> + if (qemu_loadvm_state(fb) < 0) {
>> + error_report("COLO: loadvm failed");
>> + qemu_mutex_unlock_iothread();
>> + goto out;
>> + }
>> + qemu_mutex_unlock_iothread();
>> +
>> + /* TODO: flush vm state */
>>
>> colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_LOADED,
>> &local_err);
>> if (local_err) {
>> goto out;
>> }
>> +
>> + qemu_fclose(fb);
>> + fb = NULL;
>> }
>>
>> out:
>> @@ -371,6 +436,11 @@ out:
>> error_report_err(local_err);
>> }
>>
>> + if (fb) {
>> + qemu_fclose(fb);
>> + }
>> + qsb_free(buffer);
>> +
>> qemu_mutex_lock_iothread();
>> colo_release_ram_cache();
>> qemu_mutex_unlock_iothread();
>> --
>> 1.8.3.1
>>
>>
> --
> Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
>
> .
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v16 14/35] COLO: Flush PVM's cached RAM into SVM's memory
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (12 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 13/35] COLO: Load VMState into qsb before restore it zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 15/35] COLO: Add checkpoint-delay parameter for migrate-set-parameters zhanghailiang
` (22 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
During the time of VM's running, PVM may dirty some pages, we will transfer
PVM's dirty pages to SVM and store them into SVM's RAM cache at next checkpoint
time. So, the content of SVM's RAM cache will always be same with PVM's memory
after checkpoint.
Instead of flushing all content of PVM's RAM cache into SVM's MEMORY,
we do this in a more efficient way:
Only flush any page that dirtied by PVM since last checkpoint.
In this way, we can ensure SVM's memory same with PVM's.
Besides, we must ensure flush RAM cache before load device state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Add a trace point in the end of colo_flush_ram_cache() (Dave's suggestion)
- Add Reviewed-by tag
v11:
- Move the place of 'need_flush' (Dave's suggestion)
- Remove unused 'DPRINTF("Flush ram_cache\n")'
v10:
- trace the number of dirty pages that be received.
---
include/migration/migration.h | 1 +
migration/colo.c | 2 --
migration/ram.c | 38 ++++++++++++++++++++++++++++++++++++++
trace-events | 2 ++
4 files changed, 41 insertions(+), 2 deletions(-)
diff --git a/include/migration/migration.h b/include/migration/migration.h
index d7e6e81..820e008 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -341,4 +341,5 @@ PostcopyState postcopy_state_set(PostcopyState new_state);
/* ram cache */
int colo_init_ram_cache(void);
void colo_release_ram_cache(void);
+void colo_flush_ram_cache(void);
#endif
diff --git a/migration/colo.c b/migration/colo.c
index 52a2c3e..4dae069 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -418,8 +418,6 @@ void *colo_process_incoming_thread(void *opaque)
}
qemu_mutex_unlock_iothread();
- /* TODO: flush vm state */
-
colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_LOADED,
&local_err);
if (local_err) {
diff --git a/migration/ram.c b/migration/ram.c
index 0af43d4..1f399a8 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2466,6 +2466,7 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
* be atomic
*/
bool postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING;
+ bool need_flush = false;
seq_iter++;
@@ -2500,6 +2501,7 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
/* After going into COLO, we should load the Page into colo_cache */
if (ram_cache_enable) {
host = colo_cache_from_block_offset(block, addr);
+ need_flush = true;
} else {
host = host_from_ram_block_offset(block, addr);
}
@@ -2592,6 +2594,10 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
}
rcu_read_unlock();
+
+ if (!ret && ram_cache_enable && need_flush) {
+ colo_flush_ram_cache();
+ }
DPRINTF("Completed load of VM with exit code %d seq iteration "
"%" PRIu64 "\n", ret, seq_iter);
return ret;
@@ -2664,6 +2670,38 @@ void colo_release_ram_cache(void)
rcu_read_unlock();
}
+/*
+ * Flush content of RAM cache into SVM's memory.
+ * Only flush the pages that be dirtied by PVM or SVM or both.
+ */
+void colo_flush_ram_cache(void)
+{
+ RAMBlock *block = NULL;
+ void *dst_host;
+ void *src_host;
+ ram_addr_t offset = 0;
+
+ trace_colo_flush_ram_cache_begin(migration_dirty_pages);
+ rcu_read_lock();
+ block = QLIST_FIRST_RCU(&ram_list.blocks);
+ while (block) {
+ ram_addr_t ram_addr_abs;
+ offset = migration_bitmap_find_dirty(block, offset, &ram_addr_abs);
+ migration_bitmap_clear_dirty(ram_addr_abs);
+ if (offset >= block->used_length) {
+ offset = 0;
+ block = QLIST_NEXT_RCU(block, next);
+ } else {
+ dst_host = block->host + offset;
+ src_host = block->colo_cache + offset;
+ memcpy(dst_host, src_host, TARGET_PAGE_SIZE);
+ }
+ }
+ rcu_read_unlock();
+ trace_colo_flush_ram_cache_end();
+ assert(migration_dirty_pages == 0);
+}
+
static SaveVMHandlers savevm_ram_handlers = {
.save_live_setup = ram_save_setup,
.save_live_iterate = ram_save_iterate,
diff --git a/trace-events b/trace-events
index 2a630dd..ebd93ee 100644
--- a/trace-events
+++ b/trace-events
@@ -1286,6 +1286,8 @@ migration_throttle(void) ""
ram_load_postcopy_loop(uint64_t addr, int flags) "@%" PRIx64 " %x"
ram_postcopy_send_discard_bitmap(void) ""
ram_save_queue_pages(const char *rbname, size_t start, size_t len) "%s: start: %zx len: %zx"
+colo_flush_ram_cache_begin(uint64_t dirty_pages) "dirty_pages %" PRIu64
+colo_flush_ram_cache_end(void) ""
# hw/display/qxl.c
disable qxl_interface_set_mm_time(int qid, uint32_t mm_time) "%d %d"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 15/35] COLO: Add checkpoint-delay parameter for migrate-set-parameters
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (13 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 14/35] COLO: Flush PVM's cached RAM into SVM's memory zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 16/35] COLO: synchronize PVM's state to SVM periodically zhanghailiang
` (21 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang, Luiz Capitulino
Add checkpoint-delay parameter for migrate-set-parameters, so that
we can control the checkpoint frequency when COLO is in periodic mode.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Change checkpoint-delay to x-checkpoint-delay (Dave's suggestion)
- Add Reviewed-by tag
v11:
- Move this patch ahead of the patch where uses 'checkpoint_delay'
(Dave's suggestion)
v10:
- Fix related qmp command
---
hmp.c | 7 +++++++
migration/migration.c | 24 +++++++++++++++++++++++-
qapi-schema.json | 19 ++++++++++++++++---
qmp-commands.hx | 3 ++-
4 files changed, 48 insertions(+), 5 deletions(-)
diff --git a/hmp.c b/hmp.c
index d510236..18eed0e 100644
--- a/hmp.c
+++ b/hmp.c
@@ -286,6 +286,9 @@ void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict)
monitor_printf(mon, " %s: %" PRId64,
MigrationParameter_lookup[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT],
params->x_cpu_throttle_increment);
+ monitor_printf(mon, " %s: %" PRId64,
+ MigrationParameter_lookup[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY],
+ params->x_checkpoint_delay);
monitor_printf(mon, "\n");
}
@@ -1242,6 +1245,7 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
bool has_decompress_threads = false;
bool has_x_cpu_throttle_initial = false;
bool has_x_cpu_throttle_increment = false;
+ bool has_x_checkpoint_delay = false;
int i;
for (i = 0; i < MIGRATION_PARAMETER__MAX; i++) {
@@ -1261,6 +1265,8 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
break;
case MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT:
has_x_cpu_throttle_increment = true;
+ case MIGRATION_PARAMETER_X_CHECKPOINT_DELAY:
+ has_x_checkpoint_delay = true;
break;
}
qmp_migrate_set_parameters(has_compress_level, value,
@@ -1268,6 +1274,7 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
has_decompress_threads, value,
has_x_cpu_throttle_initial, value,
has_x_cpu_throttle_increment, value,
+ has_x_checkpoint_delay, value,
&err);
break;
}
diff --git a/migration/migration.c b/migration/migration.c
index aa767ed..58353fe 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -57,6 +57,11 @@
/* Migration XBZRLE default cache size */
#define DEFAULT_MIGRATE_CACHE_SIZE (64 * 1024 * 1024)
+/* The delay time (in ms) between two COLO checkpoints
+ * Note: Please change this default value to 10000 when we support hybrid mode.
+ */
+#define DEFAULT_MIGRATE_X_CHECKPOINT_DELAY 200
+
static NotifierList migration_state_notifiers =
NOTIFIER_LIST_INITIALIZER(migration_state_notifiers);
@@ -92,6 +97,8 @@ MigrationState *migrate_get_current(void)
DEFAULT_MIGRATE_X_CPU_THROTTLE_INITIAL,
.parameters[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT] =
DEFAULT_MIGRATE_X_CPU_THROTTLE_INCREMENT,
+ .parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] =
+ DEFAULT_MIGRATE_X_CHECKPOINT_DELAY,
};
if (!once) {
@@ -541,6 +548,8 @@ MigrationParameters *qmp_query_migrate_parameters(Error **errp)
s->parameters[MIGRATION_PARAMETER_X_CPU_THROTTLE_INITIAL];
params->x_cpu_throttle_increment =
s->parameters[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT];
+ params->x_checkpoint_delay =
+ s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY];
return params;
}
@@ -749,7 +758,10 @@ void qmp_migrate_set_parameters(bool has_compress_level,
bool has_x_cpu_throttle_initial,
int64_t x_cpu_throttle_initial,
bool has_x_cpu_throttle_increment,
- int64_t x_cpu_throttle_increment, Error **errp)
+ int64_t x_cpu_throttle_increment,
+ bool has_x_checkpoint_delay,
+ int64_t x_checkpoint_delay,
+ Error **errp)
{
MigrationState *s = migrate_get_current();
@@ -784,6 +796,11 @@ void qmp_migrate_set_parameters(bool has_compress_level,
"x_cpu_throttle_increment",
"an integer in the range of 1 to 99");
}
+ if (has_x_checkpoint_delay && (x_checkpoint_delay < 0)) {
+ error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
+ "x_checkpoint_delay",
+ "is invalid, it should be positive");
+ }
if (has_compress_level) {
s->parameters[MIGRATION_PARAMETER_COMPRESS_LEVEL] = compress_level;
@@ -804,6 +821,11 @@ void qmp_migrate_set_parameters(bool has_compress_level,
s->parameters[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT] =
x_cpu_throttle_increment;
}
+
+ if (has_x_checkpoint_delay) {
+ s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] =
+ x_checkpoint_delay;
+ }
}
void qmp_migrate_start_postcopy(Error **errp)
diff --git a/qapi-schema.json b/qapi-schema.json
index db89a68..9456248 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -621,11 +621,16 @@
# @x-cpu-throttle-increment: throttle percentage increase each time
# auto-converge detects that migration is not making
# progress. The default value is 10. (Since 2.5)
+#
+# @x-checkpoint-delay: The delay time (in ms) between two COLO checkpoints in
+# periodic mode. (Since 2.7)
+#
# Since: 2.4
##
{ 'enum': 'MigrationParameter',
'data': ['compress-level', 'compress-threads', 'decompress-threads',
- 'x-cpu-throttle-initial', 'x-cpu-throttle-increment'] }
+ 'x-cpu-throttle-initial', 'x-cpu-throttle-increment',
+ 'x-checkpoint-delay' ] }
#
# @migrate-set-parameters
@@ -645,6 +650,9 @@
# @x-cpu-throttle-increment: throttle percentage increase each time
# auto-converge detects that migration is not making
# progress. The default value is 10. (Since 2.5)
+#
+# @x-checkpoint-delay: the delay time between two checkpoints. (Since 2.6)
+#
# Since: 2.4
##
{ 'command': 'migrate-set-parameters',
@@ -652,7 +660,8 @@
'*compress-threads': 'int',
'*decompress-threads': 'int',
'*x-cpu-throttle-initial': 'int',
- '*x-cpu-throttle-increment': 'int'} }
+ '*x-cpu-throttle-increment': 'int',
+ '*x-checkpoint-delay': 'int' } }
#
# @MigrationParameters
@@ -671,6 +680,8 @@
# auto-converge detects that migration is not making
# progress. The default value is 10. (Since 2.5)
#
+# @x-checkpoint-delay: the delay time between two COLO checkpoints. (Since 2.6)
+#
# Since: 2.4
##
{ 'struct': 'MigrationParameters',
@@ -678,7 +689,9 @@
'compress-threads': 'int',
'decompress-threads': 'int',
'x-cpu-throttle-initial': 'int',
- 'x-cpu-throttle-increment': 'int'} }
+ 'x-cpu-throttle-increment': 'int',
+ 'x-checkpoint-delay': 'int'} }
+
##
# @query-migrate-parameters
#
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 3ff05aa..a506cea 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -3789,6 +3789,7 @@ Set migration parameters
throttled for auto-converge (json-int)
- "x-cpu-throttle-increment": set throttle increasing percentage for
auto-converge (json-int)
+- "x-checkpoint-delay": set the delay time for periodic checkpoint (json-int)
Arguments:
@@ -3802,7 +3803,7 @@ EQMP
{
.name = "migrate-set-parameters",
.args_type =
- "compress-level:i?,compress-threads:i?,decompress-threads:i?,x-cpu-throttle-initial:i?,x-cpu-throttle-increment:i?",
+ "compress-level:i?,compress-threads:i?,decompress-threads:i?,x-cpu-throttle-initial:i?,x-cpu-throttle-increment:i?,x-checkpoint-delay:i?",
.mhandler.cmd_new = qmp_marshal_migrate_set_parameters,
},
SQMP
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 16/35] COLO: synchronize PVM's state to SVM periodically
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (14 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 15/35] COLO: Add checkpoint-delay parameter for migrate-set-parameters zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-12 3:02 ` Li Zhijian
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 17/35] COLO failover: Introduce a new command to trigger a failover zhanghailiang
` (20 subsequent siblings)
36 siblings, 1 reply; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
Do checkpoint periodically, the default interval is 200ms.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Add Reviewed-by tag
v11:
- Fix wrong sleep time for checkpoint period. (Dave's comment)
---
migration/colo.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/migration/colo.c b/migration/colo.c
index 4dae069..4e3b39f 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -11,6 +11,7 @@
*/
#include "qemu/osdep.h"
+#include "qemu/timer.h"
#include "sysemu/sysemu.h"
#include "migration/colo.h"
#include "trace.h"
@@ -231,6 +232,7 @@ out:
static void colo_process_checkpoint(MigrationState *s)
{
QEMUSizedBuffer *buffer = NULL;
+ int64_t current_time, checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
Error *local_err = NULL;
int ret;
@@ -262,11 +264,21 @@ static void colo_process_checkpoint(MigrationState *s)
trace_colo_vm_state_change("stop", "run");
while (s->state == MIGRATION_STATUS_COLO) {
+ current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
+ if (current_time - checkpoint_time <
+ s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) {
+ int64_t delay_ms;
+
+ delay_ms = s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] -
+ (current_time - checkpoint_time);
+ g_usleep(delay_ms * 1000);
+ }
/* start a colo checkpoint */
ret = colo_do_checkpoint_transaction(s, buffer);
if (ret < 0) {
goto out;
}
+ checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
}
out:
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 16/35] COLO: synchronize PVM's state to SVM periodically
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 16/35] COLO: synchronize PVM's state to SVM periodically zhanghailiang
@ 2016-04-12 3:02 ` Li Zhijian
2016-04-12 13:01 ` Hailiang Zhang
0 siblings, 1 reply; 54+ messages in thread
From: Li Zhijian @ 2016-04-12 3:02 UTC (permalink / raw)
To: zhanghailiang, qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, arei.gonglei, stefanha,
hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru
On 04/08/2016 02:26 PM, zhanghailiang wrote:
> Do checkpoint periodically, the default interval is 200ms.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> v12:
> - Add Reviewed-by tag
> v11:
> - Fix wrong sleep time for checkpoint period. (Dave's comment)
> ---
> migration/colo.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/migration/colo.c b/migration/colo.c
> index 4dae069..4e3b39f 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -11,6 +11,7 @@
> */
>
> #include "qemu/osdep.h"
> +#include "qemu/timer.h"
> #include "sysemu/sysemu.h"
> #include "migration/colo.h"
> #include "trace.h"
> @@ -231,6 +232,7 @@ out:
> static void colo_process_checkpoint(MigrationState *s)
> {
> QEMUSizedBuffer *buffer = NULL;
> + int64_t current_time, checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
> Error *local_err = NULL;
> int ret;
>
> @@ -262,11 +264,21 @@ static void colo_process_checkpoint(MigrationState *s)
> trace_colo_vm_state_change("stop", "run");
>
> while (s->state == MIGRATION_STATUS_COLO) {
> + current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
> + if (current_time - checkpoint_time <
> + s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) {
> + int64_t delay_ms;
> +
> + delay_ms = s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] -
> + (current_time - checkpoint_time);
> + g_usleep(delay_ms * 1000);
Once a large value(e.g. 1000000) is set to s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY],
that means here will sleep 1000 seconds and people can't revert this operation.
Can we let this sleep operation more flexible ?
Thanks
Li Zhijian
> + }
> /* start a colo checkpoint */
> ret = colo_do_checkpoint_transaction(s, buffer);
> if (ret < 0) {
> goto out;
> }
> + checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
> }
>
> out:
>
--
Best regards.
Li Zhijian (8555)
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 16/35] COLO: synchronize PVM's state to SVM periodically
2016-04-12 3:02 ` Li Zhijian
@ 2016-04-12 13:01 ` Hailiang Zhang
0 siblings, 0 replies; 54+ messages in thread
From: Hailiang Zhang @ 2016-04-12 13:01 UTC (permalink / raw)
To: Li Zhijian, qemu-devel
Cc: peter.huangpeng, amit.shah, quintela, dgilbert, eblake,
eddie.dong, yunhong.jiang, wency, arei.gonglei, stefanha,
hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru
On 2016/4/12 11:02, Li Zhijian wrote:
>
>
> On 04/08/2016 02:26 PM, zhanghailiang wrote:
>> Do checkpoint periodically, the default interval is 200ms.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
>> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
>> ---
>> v12:
>> - Add Reviewed-by tag
>> v11:
>> - Fix wrong sleep time for checkpoint period. (Dave's comment)
>> ---
>> migration/colo.c | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/migration/colo.c b/migration/colo.c
>> index 4dae069..4e3b39f 100644
>> --- a/migration/colo.c
>> +++ b/migration/colo.c
>> @@ -11,6 +11,7 @@
>> */
>>
>> #include "qemu/osdep.h"
>> +#include "qemu/timer.h"
>> #include "sysemu/sysemu.h"
>> #include "migration/colo.h"
>> #include "trace.h"
>> @@ -231,6 +232,7 @@ out:
>> static void colo_process_checkpoint(MigrationState *s)
>> {
>> QEMUSizedBuffer *buffer = NULL;
>> + int64_t current_time, checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
>> Error *local_err = NULL;
>> int ret;
>>
>> @@ -262,11 +264,21 @@ static void colo_process_checkpoint(MigrationState *s)
>> trace_colo_vm_state_change("stop", "run");
>>
>> while (s->state == MIGRATION_STATUS_COLO) {
>> + current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
>> + if (current_time - checkpoint_time <
>> + s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) {
>> + int64_t delay_ms;
>> +
>> + delay_ms = s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] -
>> + (current_time - checkpoint_time);
>> + g_usleep(delay_ms * 1000);
>
> Once a large value(e.g. 1000000) is set to s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY],
> that means here will sleep 1000 seconds and people can't revert this operation.
> Can we let this sleep operation more flexible ?
>
Good catch, that is really a problem, we can solve it by the follow patch,
it will simplify the delay time process in COLO and benefits the later COLO
that based on colo-proxy. the colo-proxy thread can call colo_checkpoint_notify()
directly to notify COLO thread to do checkpoint.
I will not update COLO frame with this patch for now, since it is experimental
and the related patches have been reviewed, i will keep it as a optimized
patch for later COLO. Thanks.
From bde668d63c182540a013074a70c7a37474aedf94 Mon Sep 17 00:00:00 2001
From: zhanghailiang <zhang.zhanghailiang@huawei.com>
Date: Wed, 13 Apr 2016 01:11:09 +0800
Subject: [PATCH] COLO: use timer to notify COLO to do checkpoint
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
---
include/migration/colo.h | 1 +
include/migration/migration.h | 2 ++
migration/colo.c | 33 ++++++++++++++++++++-------------
migration/migration.c | 1 +
4 files changed, 24 insertions(+), 13 deletions(-)
diff --git a/include/migration/colo.h b/include/migration/colo.h
index 87ea6d2..9f0098e 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -38,5 +38,6 @@ void colo_do_failover(MigrationState *s);
bool colo_shutdown(void);
void colo_add_buffer_filter(Notifier *notifier, void *data);
+void colo_checkpoint_notify(void *opaque);
#endif
diff --git a/include/migration/migration.h b/include/migration/migration.h
index 1009918..fed5a14 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -181,6 +181,8 @@ struct MigrationState
RAMBlock *last_req_rb;
QemuSemaphore colo_sem;
+ int64_t checkpoint_time;
+ QEMUTimer *delay_timer;
};
void migrate_set_state(int *state, int old_state, int new_state);
diff --git a/migration/colo.c b/migration/colo.c
index 56260d8..9fb1a30 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -474,7 +474,7 @@ void colo_add_buffer_filter(Notifier *notifier, void *data)
static void colo_process_checkpoint(MigrationState *s)
{
QEMUSizedBuffer *buffer = NULL;
- int64_t current_time, checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
+ int64_t current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
Error *local_err = NULL;
int ret;
@@ -528,29 +528,22 @@ static void colo_process_checkpoint(MigrationState *s)
if (ret < 0) {
goto out;
}
-
+ timer_mod(s->delay_timer,
+ current_time + s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]);
while (s->state == MIGRATION_STATUS_COLO) {
if (failover_request_is_active()) {
error_report("failover request");
goto out;
}
- current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
- if ((current_time - checkpoint_time <
- s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) &&
- !colo_shutdown_requested) {
- int64_t delay_ms;
-
- delay_ms = s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] -
- (current_time - checkpoint_time);
- g_usleep(delay_ms * 1000);
+ if (!colo_shutdown_requested) {
+ qemu_sem_wait(&s->colo_sem);
}
/* start a colo checkpoint */
ret = colo_do_checkpoint_transaction(s, buffer);
if (ret < 0) {
goto out;
}
- checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
}
out:
@@ -572,7 +565,7 @@ out:
qsb_free(buffer);
buffer = NULL;
-
+ timer_del(s->delay_timer);
/* Hope this not to be too long to wait here */
qemu_sem_wait(&s->colo_sem);
qemu_sem_destroy(&s->colo_sem);
@@ -586,12 +579,26 @@ out:
}
}
+void colo_checkpoint_notify(void *opaque)
+{
+ MigrationState *s = opaque;
+ int64_t next_notify_time;
+
+ qemu_sem_post(&s->colo_sem);
+ s->checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
+ next_notify_time = s->checkpoint_time +
+ s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY];
+ timer_mod(s->delay_timer, next_notify_time);
+}
+
void migrate_start_colo_process(MigrationState *s)
{
qemu_mutex_unlock_iothread();
qemu_sem_init(&s->colo_sem, 0);
migrate_set_state(&s->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
+ s->delay_timer = timer_new_ms(QEMU_CLOCK_HOST, colo_checkpoint_notify,
+ s);
colo_process_checkpoint(s);
qemu_mutex_lock_iothread();
}
diff --git a/migration/migration.c b/migration/migration.c
index 3bceecc..8907075 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -825,6 +825,7 @@ void qmp_migrate_set_parameters(bool has_compress_level,
if (has_x_checkpoint_delay) {
s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] =
x_checkpoint_delay;
+ colo_checkpoint_notify(s);
}
}
--
1.8.3.1
> Thanks
> Li Zhijian
>
>> + }
>> /* start a colo checkpoint */
>> ret = colo_do_checkpoint_transaction(s, buffer);
>> if (ret < 0) {
>> goto out;
>> }
>> + checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
>> }
>>
>> out:
>>
>
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v16 17/35] COLO failover: Introduce a new command to trigger a failover
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (15 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 16/35] COLO: synchronize PVM's state to SVM periodically zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 18/35] COLO failover: Introduce state to record failover process zhanghailiang
` (19 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang, Luiz Capitulino
We leave users to choose whatever heartbeat solution they want, if the heartbeat
is lost, or other errors they detect, they can use experimental command
'x_colo_lost_heartbeat' to tell COLO to do failover, COLO will do operations
accordingly.
For example, if the command is sent to the PVM, the Primary side will
exit COLO mode and take over operation. If sent to the Secondary, the
secondary will run failover work, then take over server operation to
become the new Primary.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v16:
- Fix compile broken due to missing osdep.h
v13:
- Add Reviewed-by tag
v11:
- Add more comments for x-colo-lost-heartbeat command (Eric's suggestion)
- Return 'enum' instead of 'int' for get_colo_mode() (Eric's suggestion)
v10:
- Rename command colo_lost_hearbeat to experimental 'x_colo_lost_heartbeat'
---
hmp-commands.hx | 15 +++++++++++++++
hmp.c | 8 ++++++++
hmp.h | 1 +
include/migration/colo.h | 3 +++
include/migration/failover.h | 20 ++++++++++++++++++++
migration/Makefile.objs | 2 +-
migration/colo-comm.c | 11 +++++++++++
migration/colo-failover.c | 42 ++++++++++++++++++++++++++++++++++++++++++
migration/colo.c | 1 +
qapi-schema.json | 29 +++++++++++++++++++++++++++++
qmp-commands.hx | 19 +++++++++++++++++++
stubs/migration-colo.c | 8 ++++++++
12 files changed, 158 insertions(+), 1 deletion(-)
create mode 100644 include/migration/failover.h
create mode 100644 migration/colo-failover.c
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 4f4f60a..18d6e8d 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1039,6 +1039,21 @@ migration (or once already in postcopy).
ETEXI
{
+ .name = "x_colo_lost_heartbeat",
+ .args_type = "",
+ .params = "",
+ .help = "Tell COLO that heartbeat is lost,\n\t\t\t"
+ "a failover or takeover is needed.",
+ .mhandler.cmd = hmp_x_colo_lost_heartbeat,
+ },
+
+STEXI
+@item x_colo_lost_heartbeat
+@findex x_colo_lost_heartbeat
+Tell COLO that heartbeat is lost, a failover or takeover is needed.
+ETEXI
+
+ {
.name = "client_migrate_info",
.args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
.params = "protocol hostname port tls-port cert-subject",
diff --git a/hmp.c b/hmp.c
index 18eed0e..92c7da2 100644
--- a/hmp.c
+++ b/hmp.c
@@ -1313,6 +1313,14 @@ void hmp_migrate_start_postcopy(Monitor *mon, const QDict *qdict)
hmp_handle_error(mon, &err);
}
+void hmp_x_colo_lost_heartbeat(Monitor *mon, const QDict *qdict)
+{
+ Error *err = NULL;
+
+ qmp_x_colo_lost_heartbeat(&err);
+ hmp_handle_error(mon, &err);
+}
+
void hmp_set_password(Monitor *mon, const QDict *qdict)
{
const char *protocol = qdict_get_str(qdict, "protocol");
diff --git a/hmp.h b/hmp.h
index 093d65f..5d979fd 100644
--- a/hmp.h
+++ b/hmp.h
@@ -70,6 +70,7 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict);
void hmp_migrate_set_cache_size(Monitor *mon, const QDict *qdict);
void hmp_client_migrate_info(Monitor *mon, const QDict *qdict);
void hmp_migrate_start_postcopy(Monitor *mon, const QDict *qdict);
+void hmp_x_colo_lost_heartbeat(Monitor *mon, const QDict *qdict);
void hmp_set_password(Monitor *mon, const QDict *qdict);
void hmp_expire_password(Monitor *mon, const QDict *qdict);
void hmp_eject(Monitor *mon, const QDict *qdict);
diff --git a/include/migration/colo.h b/include/migration/colo.h
index b40676c..e9ac2c3 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -17,6 +17,7 @@
#include "migration/migration.h"
#include "qemu/coroutine_int.h"
#include "qemu/thread.h"
+#include "qemu/main-loop.h"
bool colo_supported(void);
void colo_info_init(void);
@@ -29,4 +30,6 @@ bool migration_incoming_enable_colo(void);
void migration_incoming_exit_colo(void);
void *colo_process_incoming_thread(void *opaque);
bool migration_incoming_in_colo_state(void);
+
+COLOMode get_colo_mode(void);
#endif
diff --git a/include/migration/failover.h b/include/migration/failover.h
new file mode 100644
index 0000000..3274735
--- /dev/null
+++ b/include/migration/failover.h
@@ -0,0 +1,20 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2016 HUAWEI TECHNOLOGIES CO.,LTD.
+ * Copyright (c) 2016 FUJITSU LIMITED
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#ifndef QEMU_FAILOVER_H
+#define QEMU_FAILOVER_H
+
+#include "qemu-common.h"
+
+void failover_request_active(Error **errp);
+
+#endif
diff --git a/migration/Makefile.objs b/migration/Makefile.objs
index 81b5713..920d1e7 100644
--- a/migration/Makefile.objs
+++ b/migration/Makefile.objs
@@ -1,6 +1,6 @@
common-obj-y += migration.o tcp.o
-common-obj-$(CONFIG_COLO) += colo.o
common-obj-y += colo-comm.o
+common-obj-$(CONFIG_COLO) += colo.o colo-failover.o
common-obj-y += vmstate.o
common-obj-y += qemu-file.o qemu-file-buf.o qemu-file-unix.o qemu-file-stdio.o
common-obj-y += xbzrle.o postcopy-ram.o
diff --git a/migration/colo-comm.c b/migration/colo-comm.c
index 1a36893..716a4f7 100644
--- a/migration/colo-comm.c
+++ b/migration/colo-comm.c
@@ -21,6 +21,17 @@ typedef struct {
static COLOInfo colo_info;
+COLOMode get_colo_mode(void)
+{
+ if (migration_in_colo_state()) {
+ return COLO_MODE_PRIMARY;
+ } else if (migration_incoming_in_colo_state()) {
+ return COLO_MODE_SECONDARY;
+ } else {
+ return COLO_MODE_UNKNOWN;
+ }
+}
+
static void colo_info_pre_save(void *opaque)
{
COLOInfo *s = opaque;
diff --git a/migration/colo-failover.c b/migration/colo-failover.c
new file mode 100644
index 0000000..413675d
--- /dev/null
+++ b/migration/colo-failover.c
@@ -0,0 +1,42 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
+ * Copyright (c) 2016 FUJITSU LIMITED
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "migration/colo.h"
+#include "migration/failover.h"
+#include "qmp-commands.h"
+#include "qapi/qmp/qerror.h"
+
+static QEMUBH *failover_bh;
+
+static void colo_failover_bh(void *opaque)
+{
+ qemu_bh_delete(failover_bh);
+ failover_bh = NULL;
+ /*TODO: Do failover work */
+}
+
+void failover_request_active(Error **errp)
+{
+ failover_bh = qemu_bh_new(colo_failover_bh, NULL);
+ qemu_bh_schedule(failover_bh);
+}
+
+void qmp_x_colo_lost_heartbeat(Error **errp)
+{
+ if (get_colo_mode() == COLO_MODE_UNKNOWN) {
+ error_setg(errp, QERR_FEATURE_DISABLED, "colo");
+ return;
+ }
+
+ failover_request_active(errp);
+}
diff --git a/migration/colo.c b/migration/colo.c
index 4e3b39f..88bbab9 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -17,6 +17,7 @@
#include "trace.h"
#include "qemu/error-report.h"
#include "qapi/error.h"
+#include "migration/failover.h"
/* colo buffer */
#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
diff --git a/qapi-schema.json b/qapi-schema.json
index 9456248..0c348fb 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -759,6 +759,35 @@
'vmstate-send', 'vmstate-size', 'vmstate-received',
'vmstate-loaded' ] }
+##
+# @COLOMode
+#
+# The colo mode
+#
+# @unknown: unknown mode
+#
+# @primary: master side
+#
+# @secondary: slave side
+#
+# Since: 2.7
+##
+{ 'enum': 'COLOMode',
+ 'data': [ 'unknown', 'primary', 'secondary'] }
+
+##
+# @x-colo-lost-heartbeat
+#
+# Tell qemu that heartbeat is lost, request it to do takeover procedures.
+# If this command is sent to the PVM, the Primary side will exit COLO mode.
+# If sent to the Secondary, the Secondary side will run failover work,
+# then takes over server operation to become the service VM.
+#
+# Since: 2.7
+##
+{ 'command': 'x-colo-lost-heartbeat' }
+
+##
# @MouseInfo:
#
# Information about a mouse device.
diff --git a/qmp-commands.hx b/qmp-commands.hx
index a506cea..2758bfa 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -803,6 +803,25 @@ Example:
EQMP
{
+ .name = "x-colo-lost-heartbeat",
+ .args_type = "",
+ .mhandler.cmd_new = qmp_marshal_x_colo_lost_heartbeat,
+ },
+
+SQMP
+x-colo-lost-heartbeat
+--------------------
+
+Tell COLO that heartbeat is lost, a failover or takeover is needed.
+
+Example:
+
+-> { "execute": "x-colo-lost-heartbeat" }
+<- { "return": {} }
+
+EQMP
+
+ {
.name = "client_migrate_info",
.args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
.params = "protocol hostname port tls-port cert-subject",
diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
index 7b72395..7811764 100644
--- a/stubs/migration-colo.c
+++ b/stubs/migration-colo.c
@@ -12,6 +12,7 @@
#include "qemu/osdep.h"
#include "migration/colo.h"
+#include "qmp-commands.h"
bool colo_supported(void)
{
@@ -36,3 +37,10 @@ void *colo_process_incoming_thread(void *opaque)
{
return NULL;
}
+
+void qmp_x_colo_lost_heartbeat(Error **errp)
+{
+ error_setg(errp, "COLO is not supported, please rerun configure"
+ " with --enable-colo option in order to support"
+ " COLO feature");
+}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 18/35] COLO failover: Introduce state to record failover process
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (16 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 17/35] COLO failover: Introduce a new command to trigger a failover zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 19/35] COLO: Implement failover work for Primary VM zhanghailiang
` (18 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
When handling failover, we do different things according to the different stage
of failover process, here we introduce a global atomic variable to record the
status of failover.
We add four failover status to indicate the different stage of failover process.
You should use the helpers to get and set the value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v11:
- fix several typos found by Dave
- Add Reviewed-by tag
---
include/migration/failover.h | 10 ++++++++++
migration/colo-failover.c | 37 +++++++++++++++++++++++++++++++++++++
migration/colo.c | 4 ++++
trace-events | 1 +
4 files changed, 52 insertions(+)
diff --git a/include/migration/failover.h b/include/migration/failover.h
index 3274735..fe71bb4 100644
--- a/include/migration/failover.h
+++ b/include/migration/failover.h
@@ -15,6 +15,16 @@
#include "qemu-common.h"
+typedef enum COLOFailoverStatus {
+ FAILOVER_STATUS_NONE = 0,
+ FAILOVER_STATUS_REQUEST = 1, /* Request but not handled */
+ FAILOVER_STATUS_HANDLING = 2, /* In the process of handling failover */
+ FAILOVER_STATUS_COMPLETED = 3, /* Finish the failover process */
+} COLOFailoverStatus;
+
+void failover_init_state(void);
+int failover_set_state(int old_state, int new_state);
+int failover_get_state(void);
void failover_request_active(Error **errp);
#endif
diff --git a/migration/colo-failover.c b/migration/colo-failover.c
index 413675d..69aac55 100644
--- a/migration/colo-failover.c
+++ b/migration/colo-failover.c
@@ -15,22 +15,59 @@
#include "migration/failover.h"
#include "qmp-commands.h"
#include "qapi/qmp/qerror.h"
+#include "qemu/error-report.h"
+#include "trace.h"
static QEMUBH *failover_bh;
+static COLOFailoverStatus failover_state;
static void colo_failover_bh(void *opaque)
{
+ int old_state;
+
qemu_bh_delete(failover_bh);
failover_bh = NULL;
+ old_state = failover_set_state(FAILOVER_STATUS_REQUEST,
+ FAILOVER_STATUS_HANDLING);
+ if (old_state != FAILOVER_STATUS_REQUEST) {
+ error_report("Unkown error for failover, old_state=%d", old_state);
+ return;
+ }
/*TODO: Do failover work */
}
void failover_request_active(Error **errp)
{
+ if (failover_set_state(FAILOVER_STATUS_NONE, FAILOVER_STATUS_REQUEST)
+ != FAILOVER_STATUS_NONE) {
+ error_setg(errp, "COLO failover is already actived");
+ return;
+ }
failover_bh = qemu_bh_new(colo_failover_bh, NULL);
qemu_bh_schedule(failover_bh);
}
+void failover_init_state(void)
+{
+ failover_state = FAILOVER_STATUS_NONE;
+}
+
+int failover_set_state(int old_state, int new_state)
+{
+ int old;
+
+ old = atomic_cmpxchg(&failover_state, old_state, new_state);
+ if (old == old_state) {
+ trace_colo_failover_set_state(new_state);
+ }
+ return old;
+}
+
+int failover_get_state(void)
+{
+ return atomic_read(&failover_state);
+}
+
void qmp_x_colo_lost_heartbeat(Error **errp)
{
if (get_colo_mode() == COLO_MODE_UNKNOWN) {
diff --git a/migration/colo.c b/migration/colo.c
index 88bbab9..af1f8c2 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -237,6 +237,8 @@ static void colo_process_checkpoint(MigrationState *s)
Error *local_err = NULL;
int ret;
+ failover_init_state();
+
s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
if (!s->rp_state.from_dst_file) {
error_report("Open QEMUFile from_dst_file failed");
@@ -343,6 +345,8 @@ void *colo_process_incoming_thread(void *opaque)
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
+ failover_init_state();
+
mis->to_src_file = qemu_file_get_return_path(mis->from_src_file);
if (!mis->to_src_file) {
error_report("colo incoming thread: Open QEMUFile to_src_file failed");
diff --git a/trace-events b/trace-events
index ebd93ee..ca7211b 100644
--- a/trace-events
+++ b/trace-events
@@ -1603,6 +1603,7 @@ postcopy_ram_incoming_cleanup_join(void) ""
colo_vm_state_change(const char *old, const char *new) "Change '%s' => '%s'"
colo_send_message(const char *msg) "Send '%s' message"
colo_receive_message(const char *msg) "Receive '%s' message"
+colo_failover_set_state(int new_state) "new state %d"
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 19/35] COLO: Implement failover work for Primary VM
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (17 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 18/35] COLO failover: Introduce state to record failover process zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 20/35] COLO: Implement failover work for Secondary VM zhanghailiang
` (17 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
For PVM, if there is failover request from users.
The colo thread will exit the loop while the failover BH does the
cleanup work and resumes VM.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Add Reviewed-by tag
v12:
- Fix error report and remove unnecessary check in
primary_vm_do_failover() (Dave's suggestion)
v11:
- Don't call migration_end() in primary_vm_do_failover(),
The cleanup work will be done in migration_thread().
- Remove vm_start() in primary_vm_do_failover() which also been
done in migraiton_thread()
v10:
- Call migration_end() in primary_vm_do_failover()
---
include/migration/colo.h | 3 +++
include/migration/failover.h | 1 +
migration/colo-failover.c | 7 +++++-
migration/colo.c | 53 +++++++++++++++++++++++++++++++++++++++++---
4 files changed, 60 insertions(+), 4 deletions(-)
diff --git a/include/migration/colo.h b/include/migration/colo.h
index e9ac2c3..e32eef4 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -32,4 +32,7 @@ void *colo_process_incoming_thread(void *opaque);
bool migration_incoming_in_colo_state(void);
COLOMode get_colo_mode(void);
+
+/* failover */
+void colo_do_failover(MigrationState *s);
#endif
diff --git a/include/migration/failover.h b/include/migration/failover.h
index fe71bb4..c4bd81e 100644
--- a/include/migration/failover.h
+++ b/include/migration/failover.h
@@ -26,5 +26,6 @@ void failover_init_state(void);
int failover_set_state(int old_state, int new_state);
int failover_get_state(void);
void failover_request_active(Error **errp);
+bool failover_request_is_active(void);
#endif
diff --git a/migration/colo-failover.c b/migration/colo-failover.c
index 69aac55..fa84172 100644
--- a/migration/colo-failover.c
+++ b/migration/colo-failover.c
@@ -33,7 +33,7 @@ static void colo_failover_bh(void *opaque)
error_report("Unkown error for failover, old_state=%d", old_state);
return;
}
- /*TODO: Do failover work */
+ colo_do_failover(NULL);
}
void failover_request_active(Error **errp)
@@ -68,6 +68,11 @@ int failover_get_state(void)
return atomic_read(&failover_state);
}
+bool failover_request_is_active(void)
+{
+ return failover_get_state() != FAILOVER_STATUS_NONE;
+}
+
void qmp_x_colo_lost_heartbeat(Error **errp)
{
if (get_colo_mode() == COLO_MODE_UNKNOWN) {
diff --git a/migration/colo.c b/migration/colo.c
index af1f8c2..bdde182 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -41,6 +41,40 @@ bool migration_incoming_in_colo_state(void)
return mis && (mis->state == MIGRATION_STATUS_COLO);
}
+static bool colo_runstate_is_stopped(void)
+{
+ return runstate_check(RUN_STATE_COLO) || !runstate_is_running();
+}
+
+static void primary_vm_do_failover(void)
+{
+ MigrationState *s = migrate_get_current();
+ int old_state;
+
+ migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
+ MIGRATION_STATUS_COMPLETED);
+
+ old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
+ FAILOVER_STATUS_COMPLETED);
+ if (old_state != FAILOVER_STATUS_HANDLING) {
+ error_report("Incorrect state (%d) while doing failover for Primary VM",
+ old_state);
+ return;
+ }
+}
+
+void colo_do_failover(MigrationState *s)
+{
+ /* Make sure vm stopped while failover */
+ if (!colo_runstate_is_stopped()) {
+ vm_stop_force_state(RUN_STATE_COLO);
+ }
+
+ if (get_colo_mode() == COLO_MODE_PRIMARY) {
+ primary_vm_do_failover();
+ }
+}
+
static void colo_send_message(QEMUFile *f, COLOMessage msg,
Error **errp)
{
@@ -167,9 +201,20 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
}
qemu_mutex_lock_iothread();
+ if (failover_request_is_active()) {
+ qemu_mutex_unlock_iothread();
+ goto out;
+ }
vm_stop_force_state(RUN_STATE_COLO);
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("run", "stop");
+ /*
+ * failover request bh could be called after
+ * vm_stop_force_state so we check failover_request_is_active() again.
+ */
+ if (failover_request_is_active()) {
+ goto out;
+ }
/* Disable block migration */
s->params.blk = 0;
@@ -267,6 +312,11 @@ static void colo_process_checkpoint(MigrationState *s)
trace_colo_vm_state_change("stop", "run");
while (s->state == MIGRATION_STATUS_COLO) {
+ if (failover_request_is_active()) {
+ error_report("failover request");
+ goto out;
+ }
+
current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
if (current_time - checkpoint_time <
s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) {
@@ -289,9 +339,6 @@ out:
if (local_err) {
error_report_err(local_err);
}
- migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
- MIGRATION_STATUS_COMPLETED);
-
qsb_free(buffer);
buffer = NULL;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 20/35] COLO: Implement failover work for Secondary VM
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (18 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 19/35] COLO: Implement failover work for Primary VM zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 21/35] qmp event: Add COLO_EXIT event to notify users while exited from COLO zhanghailiang
` (16 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
If users require SVM to takeover work, colo incoming thread should
exit from loop while failover BH helps backing to migration incoming
coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Improve error message that suggested by Dave
- Add Reviewed-by tag
---
migration/colo.c | 41 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 38 insertions(+), 3 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index bdde182..b3d88ef 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -46,6 +46,33 @@ static bool colo_runstate_is_stopped(void)
return runstate_check(RUN_STATE_COLO) || !runstate_is_running();
}
+static void secondary_vm_do_failover(void)
+{
+ int old_state;
+ MigrationIncomingState *mis = migration_incoming_get_current();
+
+ migrate_set_state(&mis->state, MIGRATION_STATUS_COLO,
+ MIGRATION_STATUS_COMPLETED);
+
+ if (!autostart) {
+ error_report("\"-S\" qemu option will be ignored in secondary side");
+ /* recover runstate to normal migration finish state */
+ autostart = true;
+ }
+
+ old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
+ FAILOVER_STATUS_COMPLETED);
+ if (old_state != FAILOVER_STATUS_HANDLING) {
+ error_report("Incorrect state (%d) while doing failover for "
+ "secondary VM", old_state);
+ return;
+ }
+ /* For Secondary VM, jump to incoming co */
+ if (mis->migration_incoming_co) {
+ qemu_coroutine_enter(mis->migration_incoming_co, NULL);
+ }
+}
+
static void primary_vm_do_failover(void)
{
MigrationState *s = migrate_get_current();
@@ -72,6 +99,8 @@ void colo_do_failover(MigrationState *s)
if (get_colo_mode() == COLO_MODE_PRIMARY) {
primary_vm_do_failover();
+ } else {
+ secondary_vm_do_failover();
}
}
@@ -431,6 +460,11 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
assert(request);
+ if (failover_request_is_active()) {
+ error_report("failover request");
+ goto out;
+ }
+
/* FIXME: This is unnecessary for periodic checkpoint mode */
colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_REPLY,
&local_err);
@@ -502,10 +536,11 @@ out:
qemu_fclose(fb);
}
qsb_free(buffer);
-
- qemu_mutex_lock_iothread();
+ /* Here, we can ensure BH is hold the global lock, and will join colo
+ * incoming thread, so here it is not necessary to lock here again,
+ * or there will be a deadlock error.
+ */
colo_release_ram_cache();
- qemu_mutex_unlock_iothread();
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 21/35] qmp event: Add COLO_EXIT event to notify users while exited from COLO
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (19 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 20/35] COLO: Implement failover work for Secondary VM zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-22 14:25 ` Eric Blake
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 22/35] COLO failover: Shutdown related socket fd when do failover zhanghailiang
` (15 subsequent siblings)
36 siblings, 1 reply; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang, Michael Roth
If some errors happen during VM's COLO FT stage, it's important to notify the users
of this event. Together with 'x_colo_lost_heartbeat', users can intervene in COLO's
failover work immediately.
If users don't want to get involved in COLO's failover verdict,
it is still necessary to notify users that we exited COLO mode.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
---
v13:
- Remove optional 'error' string for this event.
(I doubted it was usefull for users, Since users shouldn't
interpret it and can't depend on it to decide what happened
exaclty. Besides it is really hard to organize.)
- Remove unused 'unknown' member for enum COLOExitReason.
(Eric's suggestion)
- Fix comment for COLO_EXIT
v11:
- Fix several typos found by Eric
---
docs/qmp-events.txt | 16 ++++++++++++++++
migration/colo.c | 20 ++++++++++++++++++++
qapi-schema.json | 14 ++++++++++++++
qapi/event.json | 15 +++++++++++++++
4 files changed, 65 insertions(+)
diff --git a/docs/qmp-events.txt b/docs/qmp-events.txt
index fa7574d..77c634e 100644
--- a/docs/qmp-events.txt
+++ b/docs/qmp-events.txt
@@ -184,6 +184,22 @@ Example:
Note: The "ready to complete" status is always reset by a BLOCK_JOB_ERROR
event.
+COLO_EXIT
+---------
+
+Emitted when VM finishes COLO mode due to some errors happening or
+at the request of users.
+
+Data:
+
+ - "mode": COLO mode, primary or secondary side (json-string)
+ - "reason": the exit reason, internal error or external request. (json-string)
+
+Example:
+
+{"timestamp": {"seconds": 2032141960, "microseconds": 417172},
+ "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } }
+
DEVICE_DELETED
--------------
diff --git a/migration/colo.c b/migration/colo.c
index b3d88ef..42f7983 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -18,6 +18,7 @@
#include "qemu/error-report.h"
#include "qapi/error.h"
#include "migration/failover.h"
+#include "qapi-event.h"
/* colo buffer */
#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
@@ -368,6 +369,18 @@ out:
if (local_err) {
error_report_err(local_err);
}
+ /*
+ * There are only two reasons we can go here, something error happened,
+ * Or users triggered failover.
+ */
+ if (!failover_request_is_active()) {
+ qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
+ COLO_EXIT_REASON_ERROR, NULL);
+ } else {
+ qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
+ COLO_EXIT_REASON_REQUEST, NULL);
+ }
+
qsb_free(buffer);
buffer = NULL;
@@ -531,6 +544,13 @@ out:
if (local_err) {
error_report_err(local_err);
}
+ if (!failover_request_is_active()) {
+ qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
+ COLO_EXIT_REASON_ERROR, NULL);
+ } else {
+ qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
+ COLO_EXIT_REASON_REQUEST, NULL);
+ }
if (fb) {
qemu_fclose(fb);
diff --git a/qapi-schema.json b/qapi-schema.json
index 0c348fb..719fcde 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -776,6 +776,20 @@
'data': [ 'unknown', 'primary', 'secondary'] }
##
+# @COLOExitReason
+#
+# The reason for a COLO exit
+#
+# @request: COLO exit is due to an external request
+#
+# @error: COLO exit is due to an internal error
+#
+# Since: 2.7
+##
+{ 'enum': 'COLOExitReason',
+ 'data': [ 'request', 'error' ] }
+
+##
# @x-colo-lost-heartbeat
#
# Tell qemu that heartbeat is lost, request it to do takeover procedures.
diff --git a/qapi/event.json b/qapi/event.json
index 8642052..09542fa 100644
--- a/qapi/event.json
+++ b/qapi/event.json
@@ -268,6 +268,21 @@
'data': { 'pass': 'int' } }
##
+# @COLO_EXIT
+#
+# Emitted when VM finishes COLO mode due to some errors happening or
+# at the request of users.
+#
+# @mode: which COLO mode the VM was in when it exited.
+#
+# @reason: describes the reason for the COLO exit.
+#
+# Since: 2.7
+##
+{ 'event': 'COLO_EXIT',
+ 'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
+
+##
# @ACPI_DEVICE_OST
#
# Emitted when guest executes ACPI _OST method.
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 21/35] qmp event: Add COLO_EXIT event to notify users while exited from COLO
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 21/35] qmp event: Add COLO_EXIT event to notify users while exited from COLO zhanghailiang
@ 2016-04-22 14:25 ` Eric Blake
2016-04-25 9:33 ` Hailiang Zhang
0 siblings, 1 reply; 54+ messages in thread
From: Eric Blake @ 2016-04-22 14:25 UTC (permalink / raw)
To: zhanghailiang, qemu-devel
Cc: amit.shah, quintela, dgilbert, peter.huangpeng, eddie.dong,
yunhong.jiang, wency, lizhijian, arei.gonglei, stefanha,
hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru, Michael Roth
[-- Attachment #1: Type: text/plain, Size: 1354 bytes --]
On 04/08/2016 12:26 AM, zhanghailiang wrote:
> If some errors happen during VM's COLO FT stage, it's important to notify the users
> of this event. Together with 'x_colo_lost_heartbeat', users can intervene in COLO's
> failover work immediately.
> If users don't want to get involved in COLO's failover verdict,
> it is still necessary to notify users that we exited COLO mode.
>
> Cc: Markus Armbruster <armbru@redhat.com>
> Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
> ---
> +++ b/migration/colo.c
> @@ -18,6 +18,7 @@
> #include "qemu/error-report.h"
> #include "qapi/error.h"
> #include "migration/failover.h"
> +#include "qapi-event.h"
>
> /* colo buffer */
> #define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
> @@ -368,6 +369,18 @@ out:
> if (local_err) {
> error_report_err(local_err);
> }
> + /*
> + * There are only two reasons we can go here, something error happened,
> + * Or users triggered failover.
s/something/some/
s/Or users/or the user/
Otherwise looks fine. As comments are minor fixes,
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 21/35] qmp event: Add COLO_EXIT event to notify users while exited from COLO
2016-04-22 14:25 ` Eric Blake
@ 2016-04-25 9:33 ` Hailiang Zhang
0 siblings, 0 replies; 54+ messages in thread
From: Hailiang Zhang @ 2016-04-25 9:33 UTC (permalink / raw)
To: Eric Blake, qemu-devel
Cc: peter.huangpeng, amit.shah, quintela, dgilbert, eddie.dong,
yunhong.jiang, wency, lizhijian, arei.gonglei, stefanha,
hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru, Michael Roth
On 2016/4/22 22:25, Eric Blake wrote:
> On 04/08/2016 12:26 AM, zhanghailiang wrote:
>> If some errors happen during VM's COLO FT stage, it's important to notify the users
>> of this event. Together with 'x_colo_lost_heartbeat', users can intervene in COLO's
>> failover work immediately.
>> If users don't want to get involved in COLO's failover verdict,
>> it is still necessary to notify users that we exited COLO mode.
>>
>> Cc: Markus Armbruster <armbru@redhat.com>
>> Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
>> ---
>
>> +++ b/migration/colo.c
>> @@ -18,6 +18,7 @@
>> #include "qemu/error-report.h"
>> #include "qapi/error.h"
>> #include "migration/failover.h"
>> +#include "qapi-event.h"
>>
>> /* colo buffer */
>> #define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
>> @@ -368,6 +369,18 @@ out:
>> if (local_err) {
>> error_report_err(local_err);
>> }
>> + /*
>> + * There are only two reasons we can go here, something error happened,
>> + * Or users triggered failover.
>
> s/something/some/
> s/Or users/or the user/
>
> Otherwise looks fine. As comments are minor fixes,
> Reviewed-by: Eric Blake <eblake@redhat.com>
>
Thanks very much, I'll fix them in next version.
Hailiang
^ permalink raw reply [flat|nested] 54+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v16 22/35] COLO failover: Shutdown related socket fd when do failover
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (20 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 21/35] qmp event: Add COLO_EXIT event to notify users while exited from COLO zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 23/35] COLO failover: Don't do failover during loading VM's state zhanghailiang
` (14 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
If the net connection between COLO's two sides is broken while colo/colo incoming
thread is blocked in 'read'/'write' socket fd. It will not detect this error until
connect timeout. It will be a long time.
Here we shutdown all the related socket file descriptors to wake up the blocking
operation in failover BH. Besides, we should close the corresponding file descriptors
after failvoer BH shutdown them, or there will be an error.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Add Reviewed-by tag
- Use semaphore to notify colo/colo incoming loop that
failover work is finished.
v12:
- Shutdown both QEMUFile's fd though they may use the
same fd. (Dave's suggestion)
v11:
- Only shutdown fd for once
---
include/migration/migration.h | 3 +++
migration/colo.c | 43 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
diff --git a/include/migration/migration.h b/include/migration/migration.h
index 820e008..1009918 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -113,6 +113,7 @@ struct MigrationIncomingState {
QemuThread colo_incoming_thread;
/* The coroutine we should enter (back) after failover */
Coroutine *migration_incoming_co;
+ QemuSemaphore colo_incoming_sem;
/* See savevm.c */
LoadStateEntry_Head loadvm_handlers;
@@ -178,6 +179,8 @@ struct MigrationState
QSIMPLEQ_HEAD(src_page_requests, MigrationSrcPageRequest) src_page_requests;
/* The RAMBlock used in the last src_page_request */
RAMBlock *last_req_rb;
+
+ QemuSemaphore colo_sem;
};
void migrate_set_state(int *state, int old_state, int new_state);
diff --git a/migration/colo.c b/migration/colo.c
index 42f7983..c4989c6 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -60,6 +60,18 @@ static void secondary_vm_do_failover(void)
/* recover runstate to normal migration finish state */
autostart = true;
}
+ /*
+ * Make sure colo incoming thread not block in recv or send,
+ * If mis->from_src_file and mis->to_src_file use the same fd,
+ * The second shutdown() will return -1, we ignore this value,
+ * it is harmless.
+ */
+ if (mis->from_src_file) {
+ qemu_file_shutdown(mis->from_src_file);
+ }
+ if (mis->to_src_file) {
+ qemu_file_shutdown(mis->to_src_file);
+ }
old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
FAILOVER_STATUS_COMPLETED);
@@ -68,6 +80,8 @@ static void secondary_vm_do_failover(void)
"secondary VM", old_state);
return;
}
+ /* Notify COLO incoming thread that failover work is finished */
+ qemu_sem_post(&mis->colo_incoming_sem);
/* For Secondary VM, jump to incoming co */
if (mis->migration_incoming_co) {
qemu_coroutine_enter(mis->migration_incoming_co, NULL);
@@ -82,6 +96,18 @@ static void primary_vm_do_failover(void)
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
+ /*
+ * Make sure colo thread no block in recv or send,
+ * The s->rp_state.from_dst_file and s->to_dst_file may use the
+ * same fd, but we still shutdown the fd for twice, it is harmless.
+ */
+ if (s->to_dst_file) {
+ qemu_file_shutdown(s->to_dst_file);
+ }
+ if (s->rp_state.from_dst_file) {
+ qemu_file_shutdown(s->rp_state.from_dst_file);
+ }
+
old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
FAILOVER_STATUS_COMPLETED);
if (old_state != FAILOVER_STATUS_HANDLING) {
@@ -89,6 +115,8 @@ static void primary_vm_do_failover(void)
old_state);
return;
}
+ /* Notify COLO thread that failover work is finished */
+ qemu_sem_post(&s->colo_sem);
}
void colo_do_failover(MigrationState *s)
@@ -384,6 +412,14 @@ out:
qsb_free(buffer);
buffer = NULL;
+ /* Hope this not to be too long to wait here */
+ qemu_sem_wait(&s->colo_sem);
+ qemu_sem_destroy(&s->colo_sem);
+ /*
+ * Must be called after failover BH is completed,
+ * Or the failover BH may shutdown the wrong fd, that
+ * re-used by other thread after we release here.
+ */
if (s->rp_state.from_dst_file) {
qemu_fclose(s->rp_state.from_dst_file);
}
@@ -392,6 +428,7 @@ out:
void migrate_start_colo_process(MigrationState *s)
{
qemu_mutex_unlock_iothread();
+ qemu_sem_init(&s->colo_sem, 0);
migrate_set_state(&s->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
colo_process_checkpoint(s);
@@ -431,6 +468,8 @@ void *colo_process_incoming_thread(void *opaque)
Error *local_err = NULL;
int ret;
+ qemu_sem_init(&mis->colo_incoming_sem, 0);
+
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
@@ -562,6 +601,10 @@ out:
*/
colo_release_ram_cache();
+ /* Hope this not to be too long to loop here */
+ qemu_sem_wait(&mis->colo_incoming_sem);
+ qemu_sem_destroy(&mis->colo_incoming_sem);
+ /* Must be called after failover BH is completed */
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 23/35] COLO failover: Don't do failover during loading VM's state
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (21 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 22/35] COLO failover: Shutdown related socket fd when do failover zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-05-06 9:09 ` Changlong Xie
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 24/35] COLO: Process shutdown command for VM in COLO state zhanghailiang
` (13 subsequent siblings)
36 siblings, 1 reply; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
We should not do failover work while the main thread is loading
VM's state, otherwise it will destroy the consistent of VM's memory and
device state.
Here we add a new failover status 'RELAUNCH' which means we should
relaunch the process of failover.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v14:
- Move the place of 'vmstate_loading = false;'.
v13:
- Add Reviewed-by tag
---
include/migration/failover.h | 2 ++
migration/colo.c | 25 +++++++++++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/include/migration/failover.h b/include/migration/failover.h
index c4bd81e..99b0d58 100644
--- a/include/migration/failover.h
+++ b/include/migration/failover.h
@@ -20,6 +20,8 @@ typedef enum COLOFailoverStatus {
FAILOVER_STATUS_REQUEST = 1, /* Request but not handled */
FAILOVER_STATUS_HANDLING = 2, /* In the process of handling failover */
FAILOVER_STATUS_COMPLETED = 3, /* Finish the failover process */
+ /* Optional, Relaunch the failover process, again 'NONE' -> 'COMPLETED' */
+ FAILOVER_STATUS_RELAUNCH = 4,
} COLOFailoverStatus;
void failover_init_state(void);
diff --git a/migration/colo.c b/migration/colo.c
index c4989c6..252a290 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -20,6 +20,8 @@
#include "migration/failover.h"
#include "qapi-event.h"
+static bool vmstate_loading;
+
/* colo buffer */
#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
@@ -52,6 +54,19 @@ static void secondary_vm_do_failover(void)
int old_state;
MigrationIncomingState *mis = migration_incoming_get_current();
+ /* Can not do failover during the process of VM's loading VMstate, Or
+ * it will break the secondary VM.
+ */
+ if (vmstate_loading) {
+ old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
+ FAILOVER_STATUS_RELAUNCH);
+ if (old_state != FAILOVER_STATUS_HANDLING) {
+ error_report("Unknown error while do failover for secondary VM,"
+ "old_state: %d", old_state);
+ }
+ return;
+ }
+
migrate_set_state(&mis->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
@@ -561,13 +576,22 @@ void *colo_process_incoming_thread(void *opaque)
qemu_mutex_lock_iothread();
qemu_system_reset(VMRESET_SILENT);
+ vmstate_loading = true;
if (qemu_loadvm_state(fb) < 0) {
error_report("COLO: loadvm failed");
qemu_mutex_unlock_iothread();
goto out;
}
+
+ vmstate_loading = false;
qemu_mutex_unlock_iothread();
+ if (failover_get_state() == FAILOVER_STATUS_RELAUNCH) {
+ failover_set_state(FAILOVER_STATUS_RELAUNCH, FAILOVER_STATUS_NONE);
+ failover_request_active(NULL);
+ goto out;
+ }
+
colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_LOADED,
&local_err);
if (local_err) {
@@ -579,6 +603,7 @@ void *colo_process_incoming_thread(void *opaque)
}
out:
+ vmstate_loading = false;
/* Throw the unreported error message after exited from loop */
if (local_err) {
error_report_err(local_err);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 23/35] COLO failover: Don't do failover during loading VM's state
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 23/35] COLO failover: Don't do failover during loading VM's state zhanghailiang
@ 2016-05-06 9:09 ` Changlong Xie
2016-05-06 11:07 ` Hailiang Zhang
0 siblings, 1 reply; 54+ messages in thread
From: Changlong Xie @ 2016-05-06 9:09 UTC (permalink / raw)
To: zhanghailiang, qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, armbru
On 04/08/2016 02:26 PM, zhanghailiang wrote:
> We should not do failover work while the main thread is loading
> VM's state, otherwise it will destroy the consistent of VM's memory and
> device state.
>
> Here we add a new failover status 'RELAUNCH' which means we should
> relaunch the process of failover.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> v14:
> - Move the place of 'vmstate_loading = false;'.
> v13:
> - Add Reviewed-by tag
> ---
> include/migration/failover.h | 2 ++
> migration/colo.c | 25 +++++++++++++++++++++++++
> 2 files changed, 27 insertions(+)
>
> diff --git a/include/migration/failover.h b/include/migration/failover.h
> index c4bd81e..99b0d58 100644
> --- a/include/migration/failover.h
> +++ b/include/migration/failover.h
> @@ -20,6 +20,8 @@ typedef enum COLOFailoverStatus {
> FAILOVER_STATUS_REQUEST = 1, /* Request but not handled */
> FAILOVER_STATUS_HANDLING = 2, /* In the process of handling failover */
> FAILOVER_STATUS_COMPLETED = 3, /* Finish the failover process */
> + /* Optional, Relaunch the failover process, again 'NONE' -> 'COMPLETED' */
> + FAILOVER_STATUS_RELAUNCH = 4,
> } COLOFailoverStatus;
>
> void failover_init_state(void);
> diff --git a/migration/colo.c b/migration/colo.c
> index c4989c6..252a290 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -20,6 +20,8 @@
> #include "migration/failover.h"
> #include "qapi-event.h"
>
> +static bool vmstate_loading;
> +
> /* colo buffer */
> #define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
>
> @@ -52,6 +54,19 @@ static void secondary_vm_do_failover(void)
> int old_state;
> MigrationIncomingState *mis = migration_incoming_get_current();
>
> + /* Can not do failover during the process of VM's loading VMstate, Or
> + * it will break the secondary VM.
Wrong comments style
> + */
> + if (vmstate_loading) {
> + old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
> + FAILOVER_STATUS_RELAUNCH);
> + if (old_state != FAILOVER_STATUS_HANDLING) {
> + error_report("Unknown error while do failover for secondary VM,"
> + "old_state: %d", old_state);
> + }
> + return;
> + }
> +
> migrate_set_state(&mis->state, MIGRATION_STATUS_COLO,
> MIGRATION_STATUS_COMPLETED);
>
> @@ -561,13 +576,22 @@ void *colo_process_incoming_thread(void *opaque)
>
> qemu_mutex_lock_iothread();
> qemu_system_reset(VMRESET_SILENT);
> + vmstate_loading = true;
> if (qemu_loadvm_state(fb) < 0) {
> error_report("COLO: loadvm failed");
> qemu_mutex_unlock_iothread();
> goto out;
> }
> +
> + vmstate_loading = false;
> qemu_mutex_unlock_iothread();
>
> + if (failover_get_state() == FAILOVER_STATUS_RELAUNCH) {
> + failover_set_state(FAILOVER_STATUS_RELAUNCH, FAILOVER_STATUS_NONE);
> + failover_request_active(NULL);
> + goto out;
> + }
> +
> colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_LOADED,
> &local_err);
> if (local_err) {
> @@ -579,6 +603,7 @@ void *colo_process_incoming_thread(void *opaque)
> }
>
> out:
> + vmstate_loading = false;
An redundant blank.
It seems there are many coding style issues in whole colo.c that you
did't notice.
Thanks
-Xie
> /* Throw the unreported error message after exited from loop */
> if (local_err) {
> error_report_err(local_err);
>
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 23/35] COLO failover: Don't do failover during loading VM's state
2016-05-06 9:09 ` Changlong Xie
@ 2016-05-06 11:07 ` Hailiang Zhang
0 siblings, 0 replies; 54+ messages in thread
From: Hailiang Zhang @ 2016-05-06 11:07 UTC (permalink / raw)
To: Changlong Xie, qemu-devel
Cc: peter.huangpeng, amit.shah, quintela, dgilbert, eblake,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, armbru
On 2016/5/6 17:09, Changlong Xie wrote:
> On 04/08/2016 02:26 PM, zhanghailiang wrote:
>> We should not do failover work while the main thread is loading
>> VM's state, otherwise it will destroy the consistent of VM's memory and
>> device state.
>>
>> Here we add a new failover status 'RELAUNCH' which means we should
>> relaunch the process of failover.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
>> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
>> ---
>> v14:
>> - Move the place of 'vmstate_loading = false;'.
>> v13:
>> - Add Reviewed-by tag
>> ---
>> include/migration/failover.h | 2 ++
>> migration/colo.c | 25 +++++++++++++++++++++++++
>> 2 files changed, 27 insertions(+)
>>
>> diff --git a/include/migration/failover.h b/include/migration/failover.h
>> index c4bd81e..99b0d58 100644
>> --- a/include/migration/failover.h
>> +++ b/include/migration/failover.h
>> @@ -20,6 +20,8 @@ typedef enum COLOFailoverStatus {
>> FAILOVER_STATUS_REQUEST = 1, /* Request but not handled */
>> FAILOVER_STATUS_HANDLING = 2, /* In the process of handling failover */
>> FAILOVER_STATUS_COMPLETED = 3, /* Finish the failover process */
>> + /* Optional, Relaunch the failover process, again 'NONE' -> 'COMPLETED' */
>> + FAILOVER_STATUS_RELAUNCH = 4,
>> } COLOFailoverStatus;
>>
>> void failover_init_state(void);
>> diff --git a/migration/colo.c b/migration/colo.c
>> index c4989c6..252a290 100644
>> --- a/migration/colo.c
>> +++ b/migration/colo.c
>> @@ -20,6 +20,8 @@
>> #include "migration/failover.h"
>> #include "qapi-event.h"
>>
>> +static bool vmstate_loading;
>> +
>> /* colo buffer */
>> #define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
>>
>> @@ -52,6 +54,19 @@ static void secondary_vm_do_failover(void)
>> int old_state;
>> MigrationIncomingState *mis = migration_incoming_get_current();
>>
>> + /* Can not do failover during the process of VM's loading VMstate, Or
>> + * it will break the secondary VM.
>
> Wrong comments style
>
>> + */
>> + if (vmstate_loading) {
>> + old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
>> + FAILOVER_STATUS_RELAUNCH);
>> + if (old_state != FAILOVER_STATUS_HANDLING) {
>> + error_report("Unknown error while do failover for secondary VM,"
>> + "old_state: %d", old_state);
>> + }
>> + return;
>> + }
>> +
>> migrate_set_state(&mis->state, MIGRATION_STATUS_COLO,
>> MIGRATION_STATUS_COMPLETED);
>>
>> @@ -561,13 +576,22 @@ void *colo_process_incoming_thread(void *opaque)
>>
>> qemu_mutex_lock_iothread();
>> qemu_system_reset(VMRESET_SILENT);
>> + vmstate_loading = true;
>> if (qemu_loadvm_state(fb) < 0) {
>> error_report("COLO: loadvm failed");
>> qemu_mutex_unlock_iothread();
>> goto out;
>> }
>> +
>> + vmstate_loading = false;
>> qemu_mutex_unlock_iothread();
>>
>> + if (failover_get_state() == FAILOVER_STATUS_RELAUNCH) {
>> + failover_set_state(FAILOVER_STATUS_RELAUNCH, FAILOVER_STATUS_NONE);
>> + failover_request_active(NULL);
>> + goto out;
>> + }
>> +
>> colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_LOADED,
>> &local_err);
>> if (local_err) {
>> @@ -579,6 +603,7 @@ void *colo_process_incoming_thread(void *opaque)
>> }
>>
>> out:
>> + vmstate_loading = false;
>
> An redundant blank.
>
> It seems there are many coding style issues in whole colo.c that you
> did't notice.
>
Good catch, i will fix them all in next version, thanks.
> Thanks
> -Xie
>
>> /* Throw the unreported error message after exited from loop */
>> if (local_err) {
>> error_report_err(local_err);
>>
>
>
>
> .
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v16 24/35] COLO: Process shutdown command for VM in COLO state
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (22 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 23/35] COLO failover: Don't do failover during loading VM's state zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 25/35] COLO: Update the global runstate after going into colo state zhanghailiang
` (12 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang, Paolo Bonzini
If VM is in COLO FT state, we should do some extra work before normal shutdown
process. SVM will ignore the shutdown command if this command is issued directly
to it, PVM will send the shutdown command to SVM if it gets this command.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v15:
- Go on the shutdown process even some error happened
while sent 'SHUTDOWN' message to SVM.
- Add Reviewed-by tag
v14:
- Remove 'colo_shutdown' variable, use colo_shutdown_request directly
v13:
- Move COLO shutdown related codes to colo.c file (Dave's suggestion)
---
include/migration/colo.h | 2 ++
include/sysemu/sysemu.h | 3 +++
migration/colo.c | 45 +++++++++++++++++++++++++++++++++++++++++++--
qapi-schema.json | 4 +++-
stubs/migration-colo.c | 5 +++++
vl.c | 19 ++++++++++++++++---
6 files changed, 72 insertions(+), 6 deletions(-)
diff --git a/include/migration/colo.h b/include/migration/colo.h
index e32eef4..919b135 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -35,4 +35,6 @@ COLOMode get_colo_mode(void);
/* failover */
void colo_do_failover(MigrationState *s);
+
+bool colo_shutdown(void);
#endif
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index 38fb3ca..8537bed 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -51,6 +51,8 @@ typedef enum WakeupReason {
QEMU_WAKEUP_REASON_OTHER,
} WakeupReason;
+extern int colo_shutdown_requested;
+
void qemu_system_reset_request(void);
void qemu_system_suspend_request(void);
void qemu_register_suspend_notifier(Notifier *notifier);
@@ -58,6 +60,7 @@ void qemu_system_wakeup_request(WakeupReason reason);
void qemu_system_wakeup_enable(WakeupReason reason, bool enabled);
void qemu_register_wakeup_notifier(Notifier *notifier);
void qemu_system_shutdown_request(void);
+void qemu_system_shutdown_request_core(void);
void qemu_system_powerdown_request(void);
void qemu_register_powerdown_notifier(Notifier *notifier);
void qemu_system_debug_request(void);
diff --git a/migration/colo.c b/migration/colo.c
index 252a290..2873bab 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -331,6 +331,21 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
goto out;
}
+ if (colo_shutdown_requested) {
+ colo_send_message(s->to_dst_file, COLO_MESSAGE_GUEST_SHUTDOWN,
+ &local_err);
+ if (local_err) {
+ error_free(local_err);
+ /* Go on the shutdown process and throw the error message */
+ error_report("Failed to send shutdown message to SVM");
+ }
+ qemu_fflush(s->to_dst_file);
+ colo_shutdown_requested = 0;
+ qemu_system_shutdown_request_core();
+ /* Fix me: Just let the colo thread exit ? */
+ qemu_thread_exit(0);
+ }
+
ret = 0;
/* Resume primary guest */
qemu_mutex_lock_iothread();
@@ -391,8 +406,9 @@ static void colo_process_checkpoint(MigrationState *s)
}
current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
- if (current_time - checkpoint_time <
- s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) {
+ if ((current_time - checkpoint_time <
+ s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) &&
+ !colo_shutdown_requested) {
int64_t delay_ms;
delay_ms = s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] -
@@ -466,6 +482,15 @@ static void colo_wait_handle_message(QEMUFile *f, int *checkpoint_request,
case COLO_MESSAGE_CHECKPOINT_REQUEST:
*checkpoint_request = 1;
break;
+ case COLO_MESSAGE_GUEST_SHUTDOWN:
+ qemu_mutex_lock_iothread();
+ vm_stop_force_state(RUN_STATE_COLO);
+ qemu_system_shutdown_request_core();
+ qemu_mutex_unlock_iothread();
+ /* the main thread will exit and terminate the whole
+ * process, do we need some cleanup?
+ */
+ qemu_thread_exit(0);
default:
*checkpoint_request = 0;
error_setg(errp, "Got unknown COLO message: %d", msg);
@@ -637,3 +662,19 @@ out:
return NULL;
}
+
+bool colo_shutdown(void)
+{
+ /*
+ * if in colo mode, we need do some significant work before respond
+ * to the shutdown request.
+ */
+ if (migration_incoming_in_colo_state()) {
+ return true; /* primary's responsibility */
+ }
+ if (migration_in_colo_state()) {
+ colo_shutdown_requested = 1;
+ return true;
+ }
+ return false;
+}
diff --git a/qapi-schema.json b/qapi-schema.json
index 719fcde..02c56a8 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -752,12 +752,14 @@
#
# @vmstate-loaded: VM's state has been loaded by SVM.
#
+# @guest-shutdown: shutdown require from PVM to SVM
+#
# Since: 2.7
##
{ 'enum': 'COLOMessage',
'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply',
'vmstate-send', 'vmstate-size', 'vmstate-received',
- 'vmstate-loaded' ] }
+ 'vmstate-loaded', 'guest-shutdown' ] }
##
# @COLOMode
diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
index 7811764..e507e17 100644
--- a/stubs/migration-colo.c
+++ b/stubs/migration-colo.c
@@ -44,3 +44,8 @@ void qmp_x_colo_lost_heartbeat(Error **errp)
" with --enable-colo option in order to support"
" COLO feature");
}
+
+bool colo_shutdown(void)
+{
+ return false;
+}
diff --git a/vl.c b/vl.c
index f47ef3c..cbe51ac 100644
--- a/vl.c
+++ b/vl.c
@@ -1646,6 +1646,8 @@ static NotifierList wakeup_notifiers =
NOTIFIER_LIST_INITIALIZER(wakeup_notifiers);
static uint32_t wakeup_reason_mask = ~(1 << QEMU_WAKEUP_REASON_NONE);
+int colo_shutdown_requested;
+
int qemu_shutdown_requested_get(void)
{
return shutdown_requested;
@@ -1779,7 +1781,10 @@ void qemu_system_guest_panicked(void)
void qemu_system_reset_request(void)
{
if (no_reboot) {
- shutdown_requested = 1;
+ qemu_system_shutdown_request();
+ if (!shutdown_requested) {/* colo handle it ? */
+ return;
+ }
} else {
reset_requested = 1;
}
@@ -1852,14 +1857,22 @@ void qemu_system_killed(int signal, pid_t pid)
qemu_notify_event();
}
-void qemu_system_shutdown_request(void)
+void qemu_system_shutdown_request_core(void)
{
- trace_qemu_system_shutdown_request();
replay_shutdown_request();
shutdown_requested = 1;
qemu_notify_event();
}
+void qemu_system_shutdown_request(void)
+{
+ trace_qemu_system_shutdown_request();
+ if (colo_shutdown()) {
+ return;
+ }
+ qemu_system_shutdown_request_core();
+}
+
static void qemu_system_powerdown(void)
{
qapi_event_send_powerdown(&error_abort);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 25/35] COLO: Update the global runstate after going into colo state
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (23 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 24/35] COLO: Process shutdown command for VM in COLO state zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 26/35] savevm: Introduce two helper functions for save/find loadvm_handlers entry zhanghailiang
` (11 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
If we start qemu with -S, the runstate will change from 'prelaunch' to 'running'
after going into colo state.
So it is necessary to update the global runstate after going into colo state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Add Reviewed-by tag
---
migration/colo.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/migration/colo.c b/migration/colo.c
index 2873bab..61a5d16 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -399,6 +399,11 @@ static void colo_process_checkpoint(MigrationState *s)
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("stop", "run");
+ ret = global_state_store();
+ if (ret < 0) {
+ goto out;
+ }
+
while (s->state == MIGRATION_STATUS_COLO) {
if (failover_request_is_active()) {
error_report("failover request");
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 26/35] savevm: Introduce two helper functions for save/find loadvm_handlers entry
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (24 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 25/35] COLO: Update the global runstate after going into colo state zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 27/35] migration/savevm: Add new helpers to process the different stages of loadvm zhanghailiang
` (10 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
For COLO's checkpoint process, we will do savevm/loadvm repeatedly.
So every time we call qemu_loadvm_section_start_full(), we will
add all sections information into loadvm_handlers list for one time.
There will be many instances in loadvm_handlers for one section,
and this will lead to memory leak.
We need to check if we have the section info in loadvm_handlers list
before save it. For normal migration, it is harmless.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v14:
- Add Reviewed-by tag
-
v13:
- New patch
---
migration/savevm.c | 56 ++++++++++++++++++++++++++++++++++++++----------------
1 file changed, 40 insertions(+), 16 deletions(-)
diff --git a/migration/savevm.c b/migration/savevm.c
index 16ba443..e9ddcca 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1739,6 +1739,37 @@ void loadvm_free_handlers(MigrationIncomingState *mis)
}
}
+static LoadStateEntry *loadvm_save_section_entry(MigrationIncomingState *mis,
+ SaveStateEntry *se,
+ uint32_t section_id,
+ uint32_t version_id)
+{
+ LoadStateEntry *le;
+
+ /* Add entry */
+ le = g_malloc0(sizeof(*le));
+
+ le->se = se;
+ le->section_id = section_id;
+ le->version_id = version_id;
+ QLIST_INSERT_HEAD(&mis->loadvm_handlers, le, entry);
+ return le;
+}
+
+static LoadStateEntry *loadvm_find_section_entry(MigrationIncomingState *mis,
+ uint32_t section_id)
+{
+ LoadStateEntry *le;
+
+ QLIST_FOREACH(le, &mis->loadvm_handlers, entry) {
+ if (le->section_id == section_id) {
+ break;
+ }
+ }
+
+ return le;
+}
+
static int
qemu_loadvm_section_start_full(QEMUFile *f, MigrationIncomingState *mis)
{
@@ -1774,16 +1805,12 @@ qemu_loadvm_section_start_full(QEMUFile *f, MigrationIncomingState *mis)
version_id, idstr, se->version_id);
return -EINVAL;
}
-
- /* Add entry */
- le = g_malloc0(sizeof(*le));
-
- le->se = se;
- le->section_id = section_id;
- le->version_id = version_id;
- QLIST_INSERT_HEAD(&mis->loadvm_handlers, le, entry);
-
- ret = vmstate_load(f, le->se, le->version_id);
+ /* Check if we have saved this section info before, if not, save it */
+ le = loadvm_find_section_entry(mis, section_id);
+ if (!le) {
+ le = loadvm_save_section_entry(mis, se, section_id, version_id);
+ }
+ ret = vmstate_load(f, se, version_id);
if (ret < 0) {
error_report("error while loading state for instance 0x%x of"
" device '%s'", instance_id, idstr);
@@ -1806,12 +1833,9 @@ qemu_loadvm_section_part_end(QEMUFile *f, MigrationIncomingState *mis)
section_id = qemu_get_be32(f);
trace_qemu_loadvm_state_section_partend(section_id);
- QLIST_FOREACH(le, &mis->loadvm_handlers, entry) {
- if (le->section_id == section_id) {
- break;
- }
- }
- if (le == NULL) {
+
+ le = loadvm_find_section_entry(mis, section_id);
+ if (!le) {
error_report("Unknown savevm section %d", section_id);
return -EINVAL;
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 27/35] migration/savevm: Add new helpers to process the different stages of loadvm
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (25 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 26/35] savevm: Introduce two helper functions for save/find loadvm_handlers entry zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 28/35] migration/savevm: Export two helper functions for savevm process zhanghailiang
` (9 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
There are several stages during loadvm process. In different stage,
migration incoming processes different section.
We want to control these stages more accuracy, to optimize the COLO
capability.
Here we add two new helper functions: qemu_loadvm_state_begin()
and qemu_load_device_state().
Besides, we make qemu_loadvm_state_main() API public.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v16:
- Add Reviewed-by
v14:
- Split from patch 'COLO: Separate the process of saving/loading
ram and device state
---
include/sysemu/sysemu.h | 3 +++
migration/savevm.c | 38 +++++++++++++++++++++++++++++++++++---
2 files changed, 38 insertions(+), 3 deletions(-)
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index 8537bed..2e8f397 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -133,6 +133,9 @@ void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
uint64_t *length_list);
int qemu_loadvm_state(QEMUFile *f);
+int qemu_loadvm_state_begin(QEMUFile *f);
+int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis);
+int qemu_load_device_state(QEMUFile *f);
typedef enum DisplayType
{
diff --git a/migration/savevm.c b/migration/savevm.c
index e9ddcca..c1f57a6 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1253,8 +1253,6 @@ enum LoadVMExitCodes {
LOADVM_QUIT = 1,
};
-static int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis);
-
/* ------ incoming postcopy messages ------ */
/* 'advise' arrives before any transfers just to tell us that a postcopy
* *might* happen - it might be skipped if precopy transferred everything
@@ -1853,7 +1851,7 @@ qemu_loadvm_section_part_end(QEMUFile *f, MigrationIncomingState *mis)
return 0;
}
-static int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis)
+int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis)
{
uint8_t section_type;
int ret;
@@ -1986,6 +1984,40 @@ int qemu_loadvm_state(QEMUFile *f)
return ret;
}
+int qemu_loadvm_state_begin(QEMUFile *f)
+{
+ MigrationIncomingState *mis = migration_incoming_get_current();
+ Error *local_err = NULL;
+ int ret;
+
+ if (qemu_savevm_state_blocked(&local_err)) {
+ error_report_err(local_err);
+ return -EINVAL;
+ }
+ /* Load QEMU_VM_SECTION_START section */
+ ret = qemu_loadvm_state_main(f, mis);
+ if (ret < 0) {
+ error_report("Failed to loadvm begin work: %d", ret);
+ }
+ return ret;
+}
+
+int qemu_load_device_state(QEMUFile *f)
+{
+ MigrationIncomingState *mis = migration_incoming_get_current();
+ int ret;
+
+ /* Load QEMU_VM_SECTION_FULL section */
+ ret = qemu_loadvm_state_main(f, mis);
+ if (ret < 0) {
+ error_report("Failed to load device state: %d", ret);
+ return ret;
+ }
+
+ cpu_synchronize_all_post_init();
+ return 0;
+}
+
void hmp_savevm(Monitor *mon, const QDict *qdict)
{
BlockDriverState *bs, *bs1;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 28/35] migration/savevm: Export two helper functions for savevm process
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (26 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 27/35] migration/savevm: Add new helpers to process the different stages of loadvm zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 29/35] COLO: Separate the process of saving/loading ram and device state zhanghailiang
` (8 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
We add a new helper functions qemu_savevm_live_state(),
and make qemu_save_device_state() public.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v15:
- Add Reviewd-by tag
v14:
- New patch split from previous
'COLO: Separate the process of saving/loading ram and device state
---
include/sysemu/sysemu.h | 3 +++
migration/savevm.c | 16 ++++++++++++----
2 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index 2e8f397..7390db1 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -132,6 +132,9 @@ void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
uint64_t *start_list,
uint64_t *length_list);
+void qemu_savevm_live_state(QEMUFile *f);
+int qemu_save_device_state(QEMUFile *f);
+
int qemu_loadvm_state(QEMUFile *f);
int qemu_loadvm_state_begin(QEMUFile *f);
int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis);
diff --git a/migration/savevm.c b/migration/savevm.c
index c1f57a6..26e95d2 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -50,6 +50,7 @@
#include "block/snapshot.h"
#include "block/qapi.h"
#include "qemu/cutils.h"
+#include "migration/colo.h"
#ifndef ETH_P_RARP
#define ETH_P_RARP 0x8035
@@ -1196,13 +1197,20 @@ static int qemu_savevm_state(QEMUFile *f, Error **errp)
return ret;
}
-static int qemu_save_device_state(QEMUFile *f)
+void qemu_savevm_live_state(QEMUFile *f)
{
- SaveStateEntry *se;
+ /* save QEMU_VM_SECTION_END section */
+ qemu_savevm_state_complete_precopy(f, true);
+ qemu_put_byte(f, QEMU_VM_EOF);
+}
- qemu_put_be32(f, QEMU_VM_FILE_MAGIC);
- qemu_put_be32(f, QEMU_VM_FILE_VERSION);
+int qemu_save_device_state(QEMUFile *f)
+{
+ SaveStateEntry *se;
+ if (!migration_in_colo_state()) {
+ qemu_savevm_state_header(f);
+ }
cpu_synchronize_all_states();
QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 29/35] COLO: Separate the process of saving/loading ram and device state
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (27 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 28/35] migration/savevm: Export two helper functions for savevm process zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 30/35] COLO: Split qemu_savevm_state_begin out of checkpoint process zhanghailiang
` (7 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
We separate the process of saving/loading ram and device state when do
checkpoint, we add new helpers for save/load ram/device. With this change,
we can directly transfer ram from master to slave without using
QEMUSizeBufferas as assistant, which also reduce the size of extra memory
been used during checkpoint.
Besides, we move the colo_flush_ram_cache to the proper position after the
above change.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v16:
- Add Reviewd-by tag
v14:
- split two new patches from this patch
- Some minor fixes from Dave
v13:
- Re-use some existed helper functions to realize saving/loading
ram and device.
v11:
- Remove load configuration section in qemu_loadvm_state_begin()
---
migration/colo.c | 48 ++++++++++++++++++++++++++++++++++++++----------
migration/ram.c | 5 -----
migration/savevm.c | 4 ++++
3 files changed, 42 insertions(+), 15 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index 61a5d16..8c05cdb 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -289,21 +289,37 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
goto out;
}
+ colo_send_message(s->to_dst_file, COLO_MESSAGE_VMSTATE_SEND, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
/* Disable block migration */
s->params.blk = 0;
s->params.shared = 0;
- qemu_savevm_state_header(trans);
- qemu_savevm_state_begin(trans, &s->params);
+ qemu_savevm_state_begin(s->to_dst_file, &s->params);
+ ret = qemu_file_get_error(s->to_dst_file);
+ if (ret < 0) {
+ error_report("Save vm state begin error");
+ goto out;
+ }
+
qemu_mutex_lock_iothread();
- qemu_savevm_state_complete_precopy(trans, false);
+ /*
+ * Only save VM's live state, which not including device state.
+ * TODO: We may need a timeout mechanism to prevent COLO process
+ * to be blocked here.
+ */
+ qemu_savevm_live_state(s->to_dst_file);
+ /* Note: device state is saved into buffer */
+ ret = qemu_save_device_state(trans);
qemu_mutex_unlock_iothread();
-
- qemu_fflush(trans);
-
- colo_send_message(s->to_dst_file, COLO_MESSAGE_VMSTATE_SEND, &local_err);
- if (local_err) {
+ if (ret < 0) {
+ error_report("Save device state error");
goto out;
}
+ qemu_fflush(trans);
+
/* we send the total size of the vmstate first */
size = qsb_get_length(buffer);
colo_send_message_value(s->to_dst_file, COLO_MESSAGE_VMSTATE_SIZE,
@@ -575,6 +591,16 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
+ ret = qemu_loadvm_state_begin(mis->from_src_file);
+ if (ret < 0) {
+ error_report("Load vm state begin error, ret=%d", ret);
+ goto out;
+ }
+ ret = qemu_loadvm_state_main(mis->from_src_file, mis);
+ if (ret < 0) {
+ error_report("Load VM's live state (ram) error");
+ goto out;
+ }
/* read the VM state total size first */
value = colo_receive_message_value(mis->from_src_file,
COLO_MESSAGE_VMSTATE_SIZE, &local_err);
@@ -607,8 +633,10 @@ void *colo_process_incoming_thread(void *opaque)
qemu_mutex_lock_iothread();
qemu_system_reset(VMRESET_SILENT);
vmstate_loading = true;
- if (qemu_loadvm_state(fb) < 0) {
- error_report("COLO: loadvm failed");
+ colo_flush_ram_cache();
+ ret = qemu_load_device_state(fb);
+ if (ret < 0) {
+ error_report("COLO: load device state failed");
qemu_mutex_unlock_iothread();
goto out;
}
diff --git a/migration/ram.c b/migration/ram.c
index 1f399a8..6edc039 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2466,7 +2466,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
* be atomic
*/
bool postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING;
- bool need_flush = false;
seq_iter++;
@@ -2501,7 +2500,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
/* After going into COLO, we should load the Page into colo_cache */
if (ram_cache_enable) {
host = colo_cache_from_block_offset(block, addr);
- need_flush = true;
} else {
host = host_from_ram_block_offset(block, addr);
}
@@ -2595,9 +2593,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
rcu_read_unlock();
- if (!ret && ram_cache_enable && need_flush) {
- colo_flush_ram_cache();
- }
DPRINTF("Completed load of VM with exit code %d seq iteration "
"%" PRIu64 "\n", ret, seq_iter);
return ret;
diff --git a/migration/savevm.c b/migration/savevm.c
index 26e95d2..4296eab 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -929,6 +929,10 @@ void qemu_savevm_state_begin(QEMUFile *f,
break;
}
}
+ if (migration_in_colo_state()) {
+ qemu_put_byte(f, QEMU_VM_EOF);
+ qemu_fflush(f);
+ }
}
/*
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 30/35] COLO: Split qemu_savevm_state_begin out of checkpoint process
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (28 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 29/35] COLO: Separate the process of saving/loading ram and device state zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 31/35] filter-buffer: Accept zero interval zhanghailiang
` (6 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang
It is unnecessary to call qemu_savevm_state_begin() in every checkponit process.
It mainly sets up devices and does the first device state pass. These data will
not change during the later checkpoint process. So, we split it out of
colo_do_checkpoint_transaction(), in this way, we can reduce these data
transferring in the later checkpoint.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Fix some minor issues found by Dave
- Add Reviewed-by tag
---
migration/colo.c | 51 ++++++++++++++++++++++++++++++++++++---------------
1 file changed, 36 insertions(+), 15 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index 8c05cdb..c16a7d7 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -294,16 +294,6 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
goto out;
}
- /* Disable block migration */
- s->params.blk = 0;
- s->params.shared = 0;
- qemu_savevm_state_begin(s->to_dst_file, &s->params);
- ret = qemu_file_get_error(s->to_dst_file);
- if (ret < 0) {
- error_report("Save vm state begin error");
- goto out;
- }
-
qemu_mutex_lock_iothread();
/*
* Only save VM's live state, which not including device state.
@@ -379,6 +369,21 @@ out:
return ret;
}
+static int colo_prepare_before_save(MigrationState *s)
+{
+ int ret;
+
+ /* Disable block migration */
+ s->params.blk = 0;
+ s->params.shared = 0;
+ qemu_savevm_state_begin(s->to_dst_file, &s->params);
+ ret = qemu_file_get_error(s->to_dst_file);
+ if (ret < 0) {
+ error_report("Save vm state begin error");
+ }
+ return ret;
+}
+
static void colo_process_checkpoint(MigrationState *s)
{
QEMUSizedBuffer *buffer = NULL;
@@ -394,6 +399,11 @@ static void colo_process_checkpoint(MigrationState *s)
goto out;
}
+ ret = colo_prepare_before_save(s);
+ if (ret < 0) {
+ goto out;
+ }
+
/*
* Wait for Secondary finish loading vm states and enter COLO
* restore.
@@ -519,6 +529,17 @@ static void colo_wait_handle_message(QEMUFile *f, int *checkpoint_request,
}
}
+static int colo_prepare_before_load(QEMUFile *f)
+{
+ int ret;
+
+ ret = qemu_loadvm_state_begin(f);
+ if (ret < 0) {
+ error_report("load vm state begin error, ret=%d", ret);
+ }
+ return ret;
+}
+
void *colo_process_incoming_thread(void *opaque)
{
MigrationIncomingState *mis = opaque;
@@ -559,6 +580,11 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
+ ret = colo_prepare_before_load(mis->from_src_file);
+ if (ret < 0) {
+ goto out;
+ }
+
colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
&local_err);
if (local_err) {
@@ -591,11 +617,6 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
- ret = qemu_loadvm_state_begin(mis->from_src_file);
- if (ret < 0) {
- error_report("Load vm state begin error, ret=%d", ret);
- goto out;
- }
ret = qemu_loadvm_state_main(mis->from_src_file, mis);
if (ret < 0) {
error_report("Load VM's live state (ram) error");
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 31/35] filter-buffer: Accept zero interval
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (29 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 30/35] COLO: Split qemu_savevm_state_begin out of checkpoint process zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 32/35] net: Add notifier/callback for netdev init zhanghailiang
` (5 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang, Jason Wang
We may want to accept zero interval when VM FT solutions like MC
or COLO use this filter to release packets on demand.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
---
net/filter-buffer.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/net/filter-buffer.c b/net/filter-buffer.c
index cc6bd94..346306a 100644
--- a/net/filter-buffer.c
+++ b/net/filter-buffer.c
@@ -118,16 +118,6 @@ static void filter_buffer_setup(NetFilterState *nf, Error **errp)
{
FilterBufferState *s = FILTER_BUFFER(nf);
- /*
- * We may want to accept zero interval when VM FT solutions like MC
- * or COLO use this filter to release packets on demand.
- */
- if (!s->interval) {
- error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "interval",
- "a non-zero interval");
- return;
- }
-
s->incoming_queue = qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
filter_buffer_setup_timer(nf);
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 32/35] net: Add notifier/callback for netdev init
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (30 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 31/35] filter-buffer: Accept zero interval zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-21 0:30 ` Hailiang Zhang
2016-04-26 6:48 ` Jason Wang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 33/35] COLO/filter: add each netdev a buffer filter zhanghailiang
` (4 subsequent siblings)
36 siblings, 2 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang, Jason Wang
We can register some callback for this notifier,
this will be used by COLO to register a callback which
will add each netdev a buffer filter.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
---
v16:
- Simplify the codes by using some helpers in QEMU
v14:
- New patch
---
include/net/net.h | 3 +++
net/net.c | 12 ++++++++++++
2 files changed, 15 insertions(+)
diff --git a/include/net/net.h b/include/net/net.h
index 73e4c46..d8abe7a 100644
--- a/include/net/net.h
+++ b/include/net/net.h
@@ -8,6 +8,7 @@
#include "net/queue.h"
#include "migration/vmstate.h"
#include "qapi-types.h"
+#include "qemu/notify.h"
#define MAX_QUEUE_NUM 1024
@@ -176,6 +177,8 @@ struct NICInfo {
int nvectors;
};
+void netdev_init_add_notifier(Notifier *notify);
+
extern int nb_nics;
extern NICInfo nd_table[MAX_NICS];
extern int default_net;
diff --git a/net/net.c b/net/net.c
index 0ad6217..6d846f4 100644
--- a/net/net.c
+++ b/net/net.c
@@ -56,6 +56,9 @@
static VMChangeStateEntry *net_change_state_entry;
static QTAILQ_HEAD(, NetClientState) net_clients;
+static NotifierList netdev_init_notifiers =
+ NOTIFIER_LIST_INITIALIZER(netdev_init_notifiers);
+
const char *host_net_devices[] = {
"tap",
"socket",
@@ -931,6 +934,10 @@ static int net_init_nic(const NetClientOptions *opts, const char *name,
return idx;
}
+void netdev_init_add_notifier(Notifier *notify)
+{
+ notifier_list_add(&netdev_init_notifiers, notify);
+}
static int (* const net_client_init_fun[NET_CLIENT_OPTIONS_KIND__MAX])(
const NetClientOptions *opts,
@@ -1017,6 +1024,11 @@ static int net_client_init1(const void *object, int is_netdev, Error **errp)
}
return -1;
}
+ if (is_netdev) {
+ const Netdev *netdev = object;
+
+ notifier_list_notify(&netdev_init_notifiers, netdev->id);
+ }
return 0;
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 32/35] net: Add notifier/callback for netdev init
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 32/35] net: Add notifier/callback for netdev init zhanghailiang
@ 2016-04-21 0:30 ` Hailiang Zhang
2016-04-26 6:59 ` Jason Wang
2016-04-26 6:48 ` Jason Wang
1 sibling, 1 reply; 54+ messages in thread
From: Hailiang Zhang @ 2016-04-21 0:30 UTC (permalink / raw)
To: qemu-devel, Jason Wang
Cc: peter.huangpeng, amit.shah, quintela, dgilbert, eblake,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru
ping ... ?
Hi Jason,
Any comments on the net parts ?
Thanks,
Hailiang
On 2016/4/8 14:26, zhanghailiang wrote:
> We can register some callback for this notifier,
> this will be used by COLO to register a callback which
> will add each netdev a buffer filter.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Cc: Jason Wang <jasowang@redhat.com>
> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
> ---
> v16:
> - Simplify the codes by using some helpers in QEMU
> v14:
> - New patch
> ---
> include/net/net.h | 3 +++
> net/net.c | 12 ++++++++++++
> 2 files changed, 15 insertions(+)
>
> diff --git a/include/net/net.h b/include/net/net.h
> index 73e4c46..d8abe7a 100644
> --- a/include/net/net.h
> +++ b/include/net/net.h
> @@ -8,6 +8,7 @@
> #include "net/queue.h"
> #include "migration/vmstate.h"
> #include "qapi-types.h"
> +#include "qemu/notify.h"
>
> #define MAX_QUEUE_NUM 1024
>
> @@ -176,6 +177,8 @@ struct NICInfo {
> int nvectors;
> };
>
> +void netdev_init_add_notifier(Notifier *notify);
> +
> extern int nb_nics;
> extern NICInfo nd_table[MAX_NICS];
> extern int default_net;
> diff --git a/net/net.c b/net/net.c
> index 0ad6217..6d846f4 100644
> --- a/net/net.c
> +++ b/net/net.c
> @@ -56,6 +56,9 @@
> static VMChangeStateEntry *net_change_state_entry;
> static QTAILQ_HEAD(, NetClientState) net_clients;
>
> +static NotifierList netdev_init_notifiers =
> + NOTIFIER_LIST_INITIALIZER(netdev_init_notifiers);
> +
> const char *host_net_devices[] = {
> "tap",
> "socket",
> @@ -931,6 +934,10 @@ static int net_init_nic(const NetClientOptions *opts, const char *name,
> return idx;
> }
>
> +void netdev_init_add_notifier(Notifier *notify)
> +{
> + notifier_list_add(&netdev_init_notifiers, notify);
> +}
>
> static int (* const net_client_init_fun[NET_CLIENT_OPTIONS_KIND__MAX])(
> const NetClientOptions *opts,
> @@ -1017,6 +1024,11 @@ static int net_client_init1(const void *object, int is_netdev, Error **errp)
> }
> return -1;
> }
> + if (is_netdev) {
> + const Netdev *netdev = object;
> +
> + notifier_list_notify(&netdev_init_notifiers, netdev->id);
> + }
> return 0;
> }
>
>
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 32/35] net: Add notifier/callback for netdev init
2016-04-21 0:30 ` Hailiang Zhang
@ 2016-04-26 6:59 ` Jason Wang
0 siblings, 0 replies; 54+ messages in thread
From: Jason Wang @ 2016-04-26 6:59 UTC (permalink / raw)
To: Hailiang Zhang, qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, armbru, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
On 04/21/2016 08:30 AM, Hailiang Zhang wrote:
> ping ... ?
>
> Hi Jason,
>
> Any comments on the net parts ?
Looks good overall, just few nits.
Thanks
>
> Thanks,
> Hailiang
>
> On 2016/4/8 14:26, zhanghailiang wrote:
>> We can register some callback for this notifier,
>> this will be used by COLO to register a callback which
>> will add each netdev a buffer filter.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Cc: Jason Wang <jasowang@redhat.com>
>> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
>> ---
>> v16:
>> - Simplify the codes by using some helpers in QEMU
>> v14:
>> - New patch
>> ---
>> include/net/net.h | 3 +++
>> net/net.c | 12 ++++++++++++
>> 2 files changed, 15 insertions(+)
>>
>> diff --git a/include/net/net.h b/include/net/net.h
>> index 73e4c46..d8abe7a 100644
>> --- a/include/net/net.h
>> +++ b/include/net/net.h
>> @@ -8,6 +8,7 @@
>> #include "net/queue.h"
>> #include "migration/vmstate.h"
>> #include "qapi-types.h"
>> +#include "qemu/notify.h"
>>
>> #define MAX_QUEUE_NUM 1024
>>
>> @@ -176,6 +177,8 @@ struct NICInfo {
>> int nvectors;
>> };
>>
>> +void netdev_init_add_notifier(Notifier *notify);
>> +
>> extern int nb_nics;
>> extern NICInfo nd_table[MAX_NICS];
>> extern int default_net;
>> diff --git a/net/net.c b/net/net.c
>> index 0ad6217..6d846f4 100644
>> --- a/net/net.c
>> +++ b/net/net.c
>> @@ -56,6 +56,9 @@
>> static VMChangeStateEntry *net_change_state_entry;
>> static QTAILQ_HEAD(, NetClientState) net_clients;
>>
>> +static NotifierList netdev_init_notifiers =
>> + NOTIFIER_LIST_INITIALIZER(netdev_init_notifiers);
>> +
>> const char *host_net_devices[] = {
>> "tap",
>> "socket",
>> @@ -931,6 +934,10 @@ static int net_init_nic(const NetClientOptions
>> *opts, const char *name,
>> return idx;
>> }
>>
>> +void netdev_init_add_notifier(Notifier *notify)
>> +{
>> + notifier_list_add(&netdev_init_notifiers, notify);
>> +}
>>
>> static int (* const
>> net_client_init_fun[NET_CLIENT_OPTIONS_KIND__MAX])(
>> const NetClientOptions *opts,
>> @@ -1017,6 +1024,11 @@ static int net_client_init1(const void
>> *object, int is_netdev, Error **errp)
>> }
>> return -1;
>> }
>> + if (is_netdev) {
>> + const Netdev *netdev = object;
>> +
>> + notifier_list_notify(&netdev_init_notifiers, netdev->id);
>> + }
>> return 0;
>> }
>>
>>
>
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v16 32/35] net: Add notifier/callback for netdev init
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 32/35] net: Add notifier/callback for netdev init zhanghailiang
2016-04-21 0:30 ` Hailiang Zhang
@ 2016-04-26 6:48 ` Jason Wang
2016-05-04 8:18 ` Hailiang Zhang
1 sibling, 1 reply; 54+ messages in thread
From: Jason Wang @ 2016-04-26 6:48 UTC (permalink / raw)
To: zhanghailiang, qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, armbru, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
On 04/08/2016 02:26 PM, zhanghailiang wrote:
> We can register some callback for this notifier,
> this will be used by COLO to register a callback which
> will add each netdev a buffer filter.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Cc: Jason Wang <jasowang@redhat.com>
> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
> ---
> v16:
> - Simplify the codes by using some helpers in QEMU
> v14:
> - New patch
> ---
> include/net/net.h | 3 +++
> net/net.c | 12 ++++++++++++
> 2 files changed, 15 insertions(+)
>
> diff --git a/include/net/net.h b/include/net/net.h
> index 73e4c46..d8abe7a 100644
> --- a/include/net/net.h
> +++ b/include/net/net.h
> @@ -8,6 +8,7 @@
> #include "net/queue.h"
> #include "migration/vmstate.h"
> #include "qapi-types.h"
> +#include "qemu/notify.h"
>
> #define MAX_QUEUE_NUM 1024
>
> @@ -176,6 +177,8 @@ struct NICInfo {
> int nvectors;
> };
>
> +void netdev_init_add_notifier(Notifier *notify);
> +
> extern int nb_nics;
> extern NICInfo nd_table[MAX_NICS];
> extern int default_net;
> diff --git a/net/net.c b/net/net.c
> index 0ad6217..6d846f4 100644
> --- a/net/net.c
> +++ b/net/net.c
> @@ -56,6 +56,9 @@
> static VMChangeStateEntry *net_change_state_entry;
> static QTAILQ_HEAD(, NetClientState) net_clients;
>
> +static NotifierList netdev_init_notifiers =
> + NOTIFIER_LIST_INITIALIZER(netdev_init_notifiers);
> +
> const char *host_net_devices[] = {
> "tap",
> "socket",
> @@ -931,6 +934,10 @@ static int net_init_nic(const NetClientOptions *opts, const char *name,
> return idx;
> }
>
> +void netdev_init_add_notifier(Notifier *notify)
> +{
> + notifier_list_add(&netdev_init_notifiers, notify);
> +}
Nitpick, like other notifier, we'd better have 'register' in the name of
this function, (e.g something like netdev_register_init_notifier()).
>
> static int (* const net_client_init_fun[NET_CLIENT_OPTIONS_KIND__MAX])(
> const NetClientOptions *opts,
> @@ -1017,6 +1024,11 @@ static int net_client_init1(const void *object, int is_netdev, Error **errp)
> }
> return -1;
> }
> + if (is_netdev) {
> + const Netdev *netdev = object;
> +
> + notifier_list_notify(&netdev_init_notifiers, netdev->id);
> + }
> return 0;
> }
>
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 32/35] net: Add notifier/callback for netdev init
2016-04-26 6:48 ` Jason Wang
@ 2016-05-04 8:18 ` Hailiang Zhang
0 siblings, 0 replies; 54+ messages in thread
From: Hailiang Zhang @ 2016-05-04 8:18 UTC (permalink / raw)
To: Jason Wang, qemu-devel
Cc: peter.huangpeng, xiecl.fnst, lizhijian, quintela, armbru,
yunhong.jiang, eddie.dong, dgilbert, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
On 2016/4/26 14:48, Jason Wang wrote:
>
>
> On 04/08/2016 02:26 PM, zhanghailiang wrote:
>> We can register some callback for this notifier,
>> this will be used by COLO to register a callback which
>> will add each netdev a buffer filter.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Cc: Jason Wang <jasowang@redhat.com>
>> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
>> ---
>> v16:
>> - Simplify the codes by using some helpers in QEMU
>> v14:
>> - New patch
>> ---
>> include/net/net.h | 3 +++
>> net/net.c | 12 ++++++++++++
>> 2 files changed, 15 insertions(+)
>>
>> diff --git a/include/net/net.h b/include/net/net.h
>> index 73e4c46..d8abe7a 100644
>> --- a/include/net/net.h
>> +++ b/include/net/net.h
>> @@ -8,6 +8,7 @@
>> #include "net/queue.h"
>> #include "migration/vmstate.h"
>> #include "qapi-types.h"
>> +#include "qemu/notify.h"
>>
>> #define MAX_QUEUE_NUM 1024
>>
>> @@ -176,6 +177,8 @@ struct NICInfo {
>> int nvectors;
>> };
>>
>> +void netdev_init_add_notifier(Notifier *notify);
>> +
>> extern int nb_nics;
>> extern NICInfo nd_table[MAX_NICS];
>> extern int default_net;
>> diff --git a/net/net.c b/net/net.c
>> index 0ad6217..6d846f4 100644
>> --- a/net/net.c
>> +++ b/net/net.c
>> @@ -56,6 +56,9 @@
>> static VMChangeStateEntry *net_change_state_entry;
>> static QTAILQ_HEAD(, NetClientState) net_clients;
>>
>> +static NotifierList netdev_init_notifiers =
>> + NOTIFIER_LIST_INITIALIZER(netdev_init_notifiers);
>> +
>> const char *host_net_devices[] = {
>> "tap",
>> "socket",
>> @@ -931,6 +934,10 @@ static int net_init_nic(const NetClientOptions *opts, const char *name,
>> return idx;
>> }
>>
>> +void netdev_init_add_notifier(Notifier *notify)
>> +{
>> + notifier_list_add(&netdev_init_notifiers, notify);
>> +}
>
> Nitpick, like other notifier, we'd better have 'register' in the name of
> this function, (e.g something like netdev_register_init_notifier()).
>
OK, I'll fix it in next version, thanks :)
>>
>> static int (* const net_client_init_fun[NET_CLIENT_OPTIONS_KIND__MAX])(
>> const NetClientOptions *opts,
>> @@ -1017,6 +1024,11 @@ static int net_client_init1(const void *object, int is_netdev, Error **errp)
>> }
>> return -1;
>> }
>> + if (is_netdev) {
>> + const Netdev *netdev = object;
>> +
>> + notifier_list_notify(&netdev_init_notifiers, netdev->id);
>> + }
>> return 0;
>> }
>>
>
>
> .
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v16 33/35] COLO/filter: add each netdev a buffer filter
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (31 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 32/35] net: Add notifier/callback for netdev init zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-26 6:58 ` Jason Wang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 34/35] COLO: manage the status of buffer filters for PVM zhanghailiang
` (3 subsequent siblings)
36 siblings, 1 reply; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang, Jason Wang
For COLO periodic mode, it need to buffer packets that
sent by VM, and we will not release these packets until
finish a checkpoint.
Here, we add each netdev a buffer-filter that will be controlled
by COLO. It is disabled by default, and the packets will not pass
through these filters. If users don't enable COLO while configure
qemu, these buffer-filters will not be added.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
---
v16:
- Remove the useless check in colo_add_buffer_filter()
v15:
- call object_new_with_props() directly to add filter in
colo_add_buffer_filter. (Jason's suggestion)
v14:
- New patch
---
include/migration/colo.h | 2 ++
include/net/filter.h | 2 ++
migration/colo-comm.c | 7 +++++++
migration/colo.c | 39 +++++++++++++++++++++++++++++++++++++++
net/filter-buffer.c | 2 --
stubs/migration-colo.c | 4 ++++
6 files changed, 54 insertions(+), 2 deletions(-)
diff --git a/include/migration/colo.h b/include/migration/colo.h
index 919b135..87ea6d2 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -37,4 +37,6 @@ COLOMode get_colo_mode(void);
void colo_do_failover(MigrationState *s);
bool colo_shutdown(void);
+void colo_add_buffer_filter(Notifier *notifier, void *data);
+
#endif
diff --git a/include/net/filter.h b/include/net/filter.h
index 0c4a2ea..817eaf4 100644
--- a/include/net/filter.h
+++ b/include/net/filter.h
@@ -21,6 +21,8 @@
#define NETFILTER_CLASS(klass) \
OBJECT_CLASS_CHECK(NetFilterClass, (klass), TYPE_NETFILTER)
+#define TYPE_FILTER_BUFFER "filter-buffer"
+
typedef void (FilterSetup) (NetFilterState *nf, Error **errp);
typedef void (FilterCleanup) (NetFilterState *nf);
/*
diff --git a/migration/colo-comm.c b/migration/colo-comm.c
index 716a4f7..a90f1cb 100644
--- a/migration/colo-comm.c
+++ b/migration/colo-comm.c
@@ -14,12 +14,14 @@
#include "qemu/osdep.h"
#include <migration/colo.h>
#include "trace.h"
+#include <net/net.h>
typedef struct {
bool colo_requested;
} COLOInfo;
static COLOInfo colo_info;
+static Notifier netdev_init_notifier;
COLOMode get_colo_mode(void)
{
@@ -59,6 +61,11 @@ static const VMStateDescription colo_state = {
void colo_info_init(void)
{
vmstate_register(NULL, 0, &colo_state, &colo_info);
+ /* FIXME: Remove this after COLO switch to using colo-proxy */
+ if (colo_supported()) {
+ netdev_init_notifier.notify = colo_add_buffer_filter;
+ netdev_init_add_notifier(&netdev_init_notifier);
+ }
}
bool migration_incoming_enable_colo(void)
diff --git a/migration/colo.c b/migration/colo.c
index c16a7d7..7a60bc1 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -19,12 +19,23 @@
#include "qapi/error.h"
#include "migration/failover.h"
#include "qapi-event.h"
+#include "net/net.h"
+#include "net/filter.h"
+#include "net/vhost_net.h"
static bool vmstate_loading;
/* colo buffer */
#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
+typedef struct COLOListNode {
+ void *opaque;
+ QLIST_ENTRY(COLOListNode) node;
+} COLOListNode;
+
+static QLIST_HEAD(, COLOListNode) COLOBufferFilters =
+ QLIST_HEAD_INITIALIZER(COLOBufferFilters);
+
bool colo_supported(void)
{
return true;
@@ -384,6 +395,34 @@ static int colo_prepare_before_save(MigrationState *s)
return ret;
}
+void colo_add_buffer_filter(Notifier *notifier, void *data)
+{
+ char *netdev_id = data;
+ NetFilterState *nf;
+ char filter_name[128];
+ Object *filter;
+ COLOListNode *filternode;
+
+ snprintf(filter_name, sizeof(filter_name),
+ "%scolo", netdev_id);
+
+ filter = object_new_with_props(TYPE_FILTER_BUFFER,
+ object_get_objects_root(),
+ filter_name, NULL,
+ "netdev", netdev_id,
+ "status", "off",
+ NULL);
+ if (!filter) {
+ return;
+ }
+ nf = NETFILTER(filter);
+ /* Only buffer the packets that sent out by VM */
+ nf->direction = NET_FILTER_DIRECTION_RX;
+ filternode = g_new0(COLOListNode, 1);
+ filternode->opaque = nf;
+ QLIST_INSERT_HEAD(&COLOBufferFilters, filternode, node);
+}
+
static void colo_process_checkpoint(MigrationState *s)
{
QEMUSizedBuffer *buffer = NULL;
diff --git a/net/filter-buffer.c b/net/filter-buffer.c
index 346306a..d1cf595 100644
--- a/net/filter-buffer.c
+++ b/net/filter-buffer.c
@@ -17,8 +17,6 @@
#include "qapi-visit.h"
#include "qom/object.h"
-#define TYPE_FILTER_BUFFER "filter-buffer"
-
#define FILTER_BUFFER(obj) \
OBJECT_CHECK(FilterBufferState, (obj), TYPE_FILTER_BUFFER)
diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
index e507e17..65b1f49 100644
--- a/stubs/migration-colo.c
+++ b/stubs/migration-colo.c
@@ -49,3 +49,7 @@ bool colo_shutdown(void)
{
return false;
}
+
+void colo_add_buffer_filter(Notifier *notifier, void *data)
+{
+}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 33/35] COLO/filter: add each netdev a buffer filter
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 33/35] COLO/filter: add each netdev a buffer filter zhanghailiang
@ 2016-04-26 6:58 ` Jason Wang
2016-05-04 8:22 ` Hailiang Zhang
0 siblings, 1 reply; 54+ messages in thread
From: Jason Wang @ 2016-04-26 6:58 UTC (permalink / raw)
To: zhanghailiang, qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru
On 04/08/2016 02:26 PM, zhanghailiang wrote:
> For COLO periodic mode, it need to buffer packets that
> sent by VM, and we will not release these packets until
> finish a checkpoint.
>
> Here, we add each netdev a buffer-filter that will be controlled
> by COLO. It is disabled by default, and the packets will not pass
> through these filters. If users don't enable COLO while configure
> qemu, these buffer-filters will not be added.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Cc: Jason Wang <jasowang@redhat.com>
> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
> ---
> v16:
> - Remove the useless check in colo_add_buffer_filter()
> v15:
> - call object_new_with_props() directly to add filter in
> colo_add_buffer_filter. (Jason's suggestion)
> v14:
> - New patch
> ---
> include/migration/colo.h | 2 ++
> include/net/filter.h | 2 ++
> migration/colo-comm.c | 7 +++++++
> migration/colo.c | 39 +++++++++++++++++++++++++++++++++++++++
> net/filter-buffer.c | 2 --
> stubs/migration-colo.c | 4 ++++
> 6 files changed, 54 insertions(+), 2 deletions(-)
>
> diff --git a/include/migration/colo.h b/include/migration/colo.h
> index 919b135..87ea6d2 100644
> --- a/include/migration/colo.h
> +++ b/include/migration/colo.h
> @@ -37,4 +37,6 @@ COLOMode get_colo_mode(void);
> void colo_do_failover(MigrationState *s);
>
> bool colo_shutdown(void);
> +void colo_add_buffer_filter(Notifier *notifier, void *data);
> +
> #endif
> diff --git a/include/net/filter.h b/include/net/filter.h
> index 0c4a2ea..817eaf4 100644
> --- a/include/net/filter.h
> +++ b/include/net/filter.h
> @@ -21,6 +21,8 @@
> #define NETFILTER_CLASS(klass) \
> OBJECT_CLASS_CHECK(NetFilterClass, (klass), TYPE_NETFILTER)
>
> +#define TYPE_FILTER_BUFFER "filter-buffer"
> +
> typedef void (FilterSetup) (NetFilterState *nf, Error **errp);
> typedef void (FilterCleanup) (NetFilterState *nf);
> /*
> diff --git a/migration/colo-comm.c b/migration/colo-comm.c
> index 716a4f7..a90f1cb 100644
> --- a/migration/colo-comm.c
> +++ b/migration/colo-comm.c
> @@ -14,12 +14,14 @@
> #include "qemu/osdep.h"
> #include <migration/colo.h>
> #include "trace.h"
> +#include <net/net.h>
>
> typedef struct {
> bool colo_requested;
> } COLOInfo;
>
> static COLOInfo colo_info;
> +static Notifier netdev_init_notifier;
>
> COLOMode get_colo_mode(void)
> {
> @@ -59,6 +61,11 @@ static const VMStateDescription colo_state = {
> void colo_info_init(void)
> {
> vmstate_register(NULL, 0, &colo_state, &colo_info);
> + /* FIXME: Remove this after COLO switch to using colo-proxy */
> + if (colo_supported()) {
> + netdev_init_notifier.notify = colo_add_buffer_filter;
> + netdev_init_add_notifier(&netdev_init_notifier);
> + }
> }
>
> bool migration_incoming_enable_colo(void)
> diff --git a/migration/colo.c b/migration/colo.c
> index c16a7d7..7a60bc1 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -19,12 +19,23 @@
> #include "qapi/error.h"
> #include "migration/failover.h"
> #include "qapi-event.h"
> +#include "net/net.h"
> +#include "net/filter.h"
> +#include "net/vhost_net.h"
>
> static bool vmstate_loading;
>
> /* colo buffer */
> #define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
>
> +typedef struct COLOListNode {
> + void *opaque;
> + QLIST_ENTRY(COLOListNode) node;
> +} COLOListNode;
> +
> +static QLIST_HEAD(, COLOListNode) COLOBufferFilters =
> + QLIST_HEAD_INITIALIZER(COLOBufferFilters);
> +
> bool colo_supported(void)
> {
> return true;
> @@ -384,6 +395,34 @@ static int colo_prepare_before_save(MigrationState *s)
> return ret;
> }
>
> +void colo_add_buffer_filter(Notifier *notifier, void *data)
> +{
> + char *netdev_id = data;
> + NetFilterState *nf;
> + char filter_name[128];
> + Object *filter;
> + COLOListNode *filternode;
> +
> + snprintf(filter_name, sizeof(filter_name),
> + "%scolo", netdev_id);
> +
> + filter = object_new_with_props(TYPE_FILTER_BUFFER,
> + object_get_objects_root(),
> + filter_name, NULL,
> + "netdev", netdev_id,
> + "status", "off",
> + NULL);
> + if (!filter) {
> + return;
Looks like at least we need a warn here?
> + }
> + nf = NETFILTER(filter);
> + /* Only buffer the packets that sent out by VM */
> + nf->direction = NET_FILTER_DIRECTION_RX;
> + filternode = g_new0(COLOListNode, 1);
> + filternode->opaque = nf;
> + QLIST_INSERT_HEAD(&COLOBufferFilters, filternode, node);
> +}
> +
> static void colo_process_checkpoint(MigrationState *s)
> {
> QEMUSizedBuffer *buffer = NULL;
> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
> index 346306a..d1cf595 100644
> --- a/net/filter-buffer.c
> +++ b/net/filter-buffer.c
> @@ -17,8 +17,6 @@
> #include "qapi-visit.h"
> #include "qom/object.h"
>
> -#define TYPE_FILTER_BUFFER "filter-buffer"
> -
> #define FILTER_BUFFER(obj) \
> OBJECT_CHECK(FilterBufferState, (obj), TYPE_FILTER_BUFFER)
>
> diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
> index e507e17..65b1f49 100644
> --- a/stubs/migration-colo.c
> +++ b/stubs/migration-colo.c
> @@ -49,3 +49,7 @@ bool colo_shutdown(void)
> {
> return false;
> }
> +
> +void colo_add_buffer_filter(Notifier *notifier, void *data)
> +{
> +}
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 33/35] COLO/filter: add each netdev a buffer filter
2016-04-26 6:58 ` Jason Wang
@ 2016-05-04 8:22 ` Hailiang Zhang
0 siblings, 0 replies; 54+ messages in thread
From: Hailiang Zhang @ 2016-05-04 8:22 UTC (permalink / raw)
To: Jason Wang, qemu-devel
Cc: peter.huangpeng, amit.shah, quintela, dgilbert, eblake,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru
On 2016/4/26 14:58, Jason Wang wrote:
>
>
> On 04/08/2016 02:26 PM, zhanghailiang wrote:
>> For COLO periodic mode, it need to buffer packets that
>> sent by VM, and we will not release these packets until
>> finish a checkpoint.
>>
>> Here, we add each netdev a buffer-filter that will be controlled
>> by COLO. It is disabled by default, and the packets will not pass
>> through these filters. If users don't enable COLO while configure
>> qemu, these buffer-filters will not be added.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Cc: Jason Wang <jasowang@redhat.com>
>> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
>> ---
>> v16:
>> - Remove the useless check in colo_add_buffer_filter()
>> v15:
>> - call object_new_with_props() directly to add filter in
>> colo_add_buffer_filter. (Jason's suggestion)
>> v14:
>> - New patch
>> ---
>> include/migration/colo.h | 2 ++
>> include/net/filter.h | 2 ++
>> migration/colo-comm.c | 7 +++++++
>> migration/colo.c | 39 +++++++++++++++++++++++++++++++++++++++
>> net/filter-buffer.c | 2 --
>> stubs/migration-colo.c | 4 ++++
>> 6 files changed, 54 insertions(+), 2 deletions(-)
>>
>> diff --git a/include/migration/colo.h b/include/migration/colo.h
>> index 919b135..87ea6d2 100644
>> --- a/include/migration/colo.h
>> +++ b/include/migration/colo.h
>> @@ -37,4 +37,6 @@ COLOMode get_colo_mode(void);
>> void colo_do_failover(MigrationState *s);
>>
>> bool colo_shutdown(void);
>> +void colo_add_buffer_filter(Notifier *notifier, void *data);
>> +
>> #endif
>> diff --git a/include/net/filter.h b/include/net/filter.h
>> index 0c4a2ea..817eaf4 100644
>> --- a/include/net/filter.h
>> +++ b/include/net/filter.h
>> @@ -21,6 +21,8 @@
>> #define NETFILTER_CLASS(klass) \
>> OBJECT_CLASS_CHECK(NetFilterClass, (klass), TYPE_NETFILTER)
>>
>> +#define TYPE_FILTER_BUFFER "filter-buffer"
>> +
>> typedef void (FilterSetup) (NetFilterState *nf, Error **errp);
>> typedef void (FilterCleanup) (NetFilterState *nf);
>> /*
>> diff --git a/migration/colo-comm.c b/migration/colo-comm.c
>> index 716a4f7..a90f1cb 100644
>> --- a/migration/colo-comm.c
>> +++ b/migration/colo-comm.c
>> @@ -14,12 +14,14 @@
>> #include "qemu/osdep.h"
>> #include <migration/colo.h>
>> #include "trace.h"
>> +#include <net/net.h>
>>
>> typedef struct {
>> bool colo_requested;
>> } COLOInfo;
>>
>> static COLOInfo colo_info;
>> +static Notifier netdev_init_notifier;
>>
>> COLOMode get_colo_mode(void)
>> {
>> @@ -59,6 +61,11 @@ static const VMStateDescription colo_state = {
>> void colo_info_init(void)
>> {
>> vmstate_register(NULL, 0, &colo_state, &colo_info);
>> + /* FIXME: Remove this after COLO switch to using colo-proxy */
>> + if (colo_supported()) {
>> + netdev_init_notifier.notify = colo_add_buffer_filter;
>> + netdev_init_add_notifier(&netdev_init_notifier);
>> + }
>> }
>>
>> bool migration_incoming_enable_colo(void)
>> diff --git a/migration/colo.c b/migration/colo.c
>> index c16a7d7..7a60bc1 100644
>> --- a/migration/colo.c
>> +++ b/migration/colo.c
>> @@ -19,12 +19,23 @@
>> #include "qapi/error.h"
>> #include "migration/failover.h"
>> #include "qapi-event.h"
>> +#include "net/net.h"
>> +#include "net/filter.h"
>> +#include "net/vhost_net.h"
>>
>> static bool vmstate_loading;
>>
>> /* colo buffer */
>> #define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
>>
>> +typedef struct COLOListNode {
>> + void *opaque;
>> + QLIST_ENTRY(COLOListNode) node;
>> +} COLOListNode;
>> +
>> +static QLIST_HEAD(, COLOListNode) COLOBufferFilters =
>> + QLIST_HEAD_INITIALIZER(COLOBufferFilters);
>> +
>> bool colo_supported(void)
>> {
>> return true;
>> @@ -384,6 +395,34 @@ static int colo_prepare_before_save(MigrationState *s)
>> return ret;
>> }
>>
>> +void colo_add_buffer_filter(Notifier *notifier, void *data)
>> +{
>> + char *netdev_id = data;
>> + NetFilterState *nf;
>> + char filter_name[128];
>> + Object *filter;
>> + COLOListNode *filternode;
>> +
>> + snprintf(filter_name, sizeof(filter_name),
>> + "%scolo", netdev_id);
>> +
>> + filter = object_new_with_props(TYPE_FILTER_BUFFER,
>> + object_get_objects_root(),
>> + filter_name, NULL,
>> + "netdev", netdev_id,
>> + "status", "off",
>> + NULL);
>> + if (!filter) {
>> + return;
>
> Looks like at least we need a warn here?
>
I'm not quite sure about this, since we add this default netfilters
automatically, we'd better to keep silence if some error
happened during this process ...
>> + }
>> + nf = NETFILTER(filter);
>> + /* Only buffer the packets that sent out by VM */
>> + nf->direction = NET_FILTER_DIRECTION_RX;
>> + filternode = g_new0(COLOListNode, 1);
>> + filternode->opaque = nf;
>> + QLIST_INSERT_HEAD(&COLOBufferFilters, filternode, node);
>> +}
>> +
>> static void colo_process_checkpoint(MigrationState *s)
>> {
>> QEMUSizedBuffer *buffer = NULL;
>> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
>> index 346306a..d1cf595 100644
>> --- a/net/filter-buffer.c
>> +++ b/net/filter-buffer.c
>> @@ -17,8 +17,6 @@
>> #include "qapi-visit.h"
>> #include "qom/object.h"
>>
>> -#define TYPE_FILTER_BUFFER "filter-buffer"
>> -
>> #define FILTER_BUFFER(obj) \
>> OBJECT_CHECK(FilterBufferState, (obj), TYPE_FILTER_BUFFER)
>>
>> diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
>> index e507e17..65b1f49 100644
>> --- a/stubs/migration-colo.c
>> +++ b/stubs/migration-colo.c
>> @@ -49,3 +49,7 @@ bool colo_shutdown(void)
>> {
>> return false;
>> }
>> +
>> +void colo_add_buffer_filter(Notifier *notifier, void *data)
>> +{
>> +}
>
>
> .
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v16 34/35] COLO: manage the status of buffer filters for PVM
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (32 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 33/35] COLO/filter: add each netdev a buffer filter zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 35/35] COLO: Add block replication into colo process zhanghailiang
` (2 subsequent siblings)
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang, Jason Wang
Enable all buffer filters that added by COLO while
go into COLO process, and disable them while exit COLO.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
---
v16:
- Stop buffer filter while doing checkpoint and resume it after
checkpoint.
v15:
- Re-implement colo_set_filter_status() based on COLOBufferFilters list.
- Fix the title of this patch
---
migration/colo.c | 33 ++++++++++++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/migration/colo.c b/migration/colo.c
index 7a60bc1..6a9caa2 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -114,10 +114,22 @@ static void secondary_vm_do_failover(void)
}
}
+static void colo_set_filter_status(const char *status, Error **errp)
+{
+ struct COLOListNode *e, *next;
+ NetFilterState *nf;
+
+ QLIST_FOREACH_SAFE(e, &COLOBufferFilters, node, next) {
+ nf = e->opaque;
+ object_property_set_str(OBJECT(nf), status, "status", errp);
+ }
+}
+
static void primary_vm_do_failover(void)
{
MigrationState *s = migrate_get_current();
int old_state;
+ Error *local_err = NULL;
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
@@ -141,6 +153,12 @@ static void primary_vm_do_failover(void)
old_state);
return;
}
+
+ colo_set_filter_status("off", &local_err);
+ if (local_err) {
+ error_report_err(local_err);
+ }
+
/* Notify COLO thread that failover work is finished */
qemu_sem_post(&s->colo_sem);
}
@@ -299,7 +317,11 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
if (failover_request_is_active()) {
goto out;
}
-
+ /* Stop buffer filter and flush the buffered packets */
+ colo_set_filter_status("off", &local_err);
+ if (local_err) {
+ goto out;
+ }
colo_send_message(s->to_dst_file, COLO_MESSAGE_VMSTATE_SEND, &local_err);
if (local_err) {
goto out;
@@ -363,6 +385,10 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
qemu_thread_exit(0);
}
+ colo_set_filter_status("on", &local_err);
+ if (local_err) {
+ goto out;
+ }
ret = 0;
/* Resume primary guest */
qemu_mutex_lock_iothread();
@@ -432,6 +458,11 @@ static void colo_process_checkpoint(MigrationState *s)
failover_init_state();
+ colo_set_filter_status("on", &local_err);
+ if (local_err) {
+ goto out;
+ }
+
s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
if (!s->rp_state.from_dst_file) {
error_report("Open QEMUFile from_dst_file failed");
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [Qemu-devel] [PATCH COLO-Frame v16 35/35] COLO: Add block replication into colo process
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (33 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 34/35] COLO: manage the status of buffer filters for PVM zhanghailiang
@ 2016-04-08 6:26 ` zhanghailiang
2016-04-08 7:58 ` [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) Zhang Chen
2016-04-22 10:42 ` Dr. David Alan Gilbert
36 siblings, 0 replies; 54+ messages in thread
From: zhanghailiang @ 2016-04-08 6:26 UTC (permalink / raw)
To: qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
zhanghailiang, Kevin Wolf, Max Reitz
Make sure master start block replication after slave's block
replication started.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
---
migration/colo.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
migration/migration.c | 6 +++++-
2 files changed, 56 insertions(+), 1 deletion(-)
diff --git a/migration/colo.c b/migration/colo.c
index 6a9caa2..56260d8 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -22,6 +22,8 @@
#include "net/net.h"
#include "net/filter.h"
#include "net/vhost_net.h"
+#include "block/block.h"
+#include "replication.h"
static bool vmstate_loading;
@@ -64,6 +66,7 @@ static void secondary_vm_do_failover(void)
{
int old_state;
MigrationIncomingState *mis = migration_incoming_get_current();
+ Error *local_err = NULL;
/* Can not do failover during the process of VM's loading VMstate, Or
* it will break the secondary VM.
@@ -81,6 +84,11 @@ static void secondary_vm_do_failover(void)
migrate_set_state(&mis->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
+ replication_stop_all(true, &local_err);
+ if (local_err) {
+ error_report_err(local_err);
+ }
+
if (!autostart) {
error_report("\"-S\" qemu option will be ignored in secondary side");
/* recover runstate to normal migration finish state */
@@ -159,6 +167,11 @@ static void primary_vm_do_failover(void)
error_report_err(local_err);
}
+ replication_stop_all(true, &local_err);
+ if (local_err) {
+ error_report_err(local_err);
+ }
+
/* Notify COLO thread that failover work is finished */
qemu_sem_post(&s->colo_sem);
}
@@ -322,6 +335,15 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
if (local_err) {
goto out;
}
+
+ /* we call this api although this may do nothing on primary side */
+ qemu_mutex_lock_iothread();
+ replication_do_checkpoint_all(&local_err);
+ qemu_mutex_unlock_iothread();
+ if (local_err) {
+ goto out;
+ }
+
colo_send_message(s->to_dst_file, COLO_MESSAGE_VMSTATE_SEND, &local_err);
if (local_err) {
goto out;
@@ -491,6 +513,13 @@ static void colo_process_checkpoint(MigrationState *s)
}
qemu_mutex_lock_iothread();
+ /* start block replication */
+ replication_start_all(REPLICATION_MODE_PRIMARY, &local_err);
+ if (local_err) {
+ qemu_mutex_unlock_iothread();
+ goto out;
+ }
+
vm_start();
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("stop", "run");
@@ -586,6 +615,7 @@ static void colo_wait_handle_message(QEMUFile *f, int *checkpoint_request,
case COLO_MESSAGE_GUEST_SHUTDOWN:
qemu_mutex_lock_iothread();
vm_stop_force_state(RUN_STATE_COLO);
+ replication_stop_all(false, NULL);
qemu_system_shutdown_request_core();
qemu_mutex_unlock_iothread();
/* the main thread will exit and terminate the whole
@@ -655,6 +685,15 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
+ qemu_mutex_lock_iothread();
+ bdrv_invalidate_cache_all(&local_err);
+ /* start block replication */
+ replication_start_all(REPLICATION_MODE_SECONDARY, &local_err);
+ qemu_mutex_unlock_iothread();
+ if (local_err) {
+ goto out;
+ }
+
colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
&local_err);
if (local_err) {
@@ -732,6 +771,18 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
+ replication_get_error_all(&local_err);
+ if (local_err) {
+ qemu_mutex_unlock_iothread();
+ goto out;
+ }
+ /* discard colo disk buffer */
+ replication_do_checkpoint_all(&local_err);
+ if (local_err) {
+ qemu_mutex_unlock_iothread();
+ goto out;
+ }
+
vmstate_loading = false;
qemu_mutex_unlock_iothread();
diff --git a/migration/migration.c b/migration/migration.c
index 58353fe..3bceecc 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -1615,7 +1615,11 @@ static void migration_completion(MigrationState *s, int current_active_state,
if (!ret) {
ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
- if (ret >= 0) {
+ /*
+ * Don't mark image with BDRV_O_INACTIVE flag if
+ * we will go into COLO stage later.
+ */
+ if (ret >= 0 && !migrate_colo_enabled()) {
ret = bdrv_inactivate_all();
}
if (ret >= 0) {
--
1.8.3.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT)
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (34 preceding siblings ...)
2016-04-08 6:26 ` [Qemu-devel] [PATCH COLO-Frame v16 35/35] COLO: Add block replication into colo process zhanghailiang
@ 2016-04-08 7:58 ` Zhang Chen
2016-04-08 8:49 ` Hailiang Zhang
2016-04-22 10:42 ` Dr. David Alan Gilbert
36 siblings, 1 reply; 54+ messages in thread
From: Zhang Chen @ 2016-04-08 7:58 UTC (permalink / raw)
To: zhanghailiang, qemu-devel
Cc: amit.shah, quintela, dgilbert, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, xiecl.fnst, armbru, Jason Wang
在 04/08/2016 02:26 PM, zhanghailiang 写道:
> This is the 16th version of COLO (Still only support periodic checkpoint).
>
> Here is only COLO frame part, you can get the whole codes from github:
> https://github.com/coloft/qemu/commits/colo-v2.7-periodic-mode
Hi~ Hailiang.
I get a 404 not found, please update this new branch~
Thanks
Zhang Chen
> There are little changes for this series except the netfilter releated part.
>
> Patch status:
> Unreviewed: patch 21, 32 ~ 35
> Updated: patch 7, 13, 32 ~ 35
>
> Cc: Jason Wang <jasowang@redhat.com>
>
> TODO:
> 1. Checkpoint based on proxy in qemu
> 2. The capability of continuous FT
> 3. Optimize the VM's downtime during checkpoint
>
> v16:
> - Fix compile broken due to missing osdep.h
> - Add reviewed-by tag for patch 27, 28, 29
> - Rename the COLO message send/receive helper function (patch 7, 13)
> - Simplify the codes by using some notifier helpers in QEMU (patch 32)
> - Remove the useless check in colo_add_buffer_filter() (patch 33)
> - Remove the previous patch 36, 37 which export filter_buffer_flush()
> to release the buffered packets for COLO, we simplify it by stopping
> buffer filter while doing checkpoint, which will flush the buffered
> packets by default. (patch 34)
> v15:
> - Go on the shutdown process if encounter error while sending shutdown
> message to SVM. (patch 24)
> - Rename qemu_need_skip_netfilter to qemu_netfilter_can_skip and Remove
> some useless comment. (patch 31, Jason)
> - Call object_new_with_props() directly to add filter in
> colo_add_buffer_filter. (patch 34, Jason)
> - Re-implement colo_set_filter_status() based on COLOBufferFilters
> list. (patch 35)
> - Re-implement colo_flush_filter_packets() based on COLOBufferFilters
> list. (patch 37)
> v14:
> - Re-implement the network processing based on netfilter (Jason Wang)
> - Rename 'COLOCommand' to 'COLOMessage'. (Markus's suggestion)
> - Split two new patches (patch 27/28) from patch 29
> - Fix some other comments from Dave and Markus.
>
> v13:
> - Refactor colo_*_cmd helper functions to use 'Error **errp' parameter
> instead of return value to indicate success or failure. (patch 10)
> - Remove the optional error message for COLO_EXIT event. (patch 25)
> - Use semaphore to notify colo/colo incoming loop that failover work is
> finished. (patch 26)
> - Move COLO shutdown related codes to colo.c file. (patch 28)
> - Fix memory leak bug for colo incoming loop. (new patch 31)
> - Re-use some existed helper functions to realize the process of
> saving/loading ram and device. (patch 32)
> - Fix some other comments from Dave and Markus.
>
> zhanghailiang (35):
> configure: Add parameter for configure to enable/disable COLO support
> migration: Introduce capability 'x-colo' to migration
> COLO: migrate colo related info to secondary node
> migration: Integrate COLO checkpoint process into migration
> migration: Integrate COLO checkpoint process into loadvm
> COLO/migration: Create a new communication path from destination to
> source
> COLO: Implement colo checkpoint protocol
> COLO: Add a new RunState RUN_STATE_COLO
> QEMUSizedBuffer: Introduce two help functions for qsb
> COLO: Save PVM state to secondary side when do checkpoint
> COLO: Load PVM's dirty pages into SVM's RAM cache temporarily
> ram/COLO: Record the dirty pages that SVM received
> COLO: Load VMState into qsb before restore it
> COLO: Flush PVM's cached RAM into SVM's memory
> COLO: Add checkpoint-delay parameter for migrate-set-parameters
> COLO: synchronize PVM's state to SVM periodically
> COLO failover: Introduce a new command to trigger a failover
> COLO failover: Introduce state to record failover process
> COLO: Implement failover work for Primary VM
> COLO: Implement failover work for Secondary VM
> qmp event: Add COLO_EXIT event to notify users while exited from COLO
> COLO failover: Shutdown related socket fd when do failover
> COLO failover: Don't do failover during loading VM's state
> COLO: Process shutdown command for VM in COLO state
> COLO: Update the global runstate after going into colo state
> savevm: Introduce two helper functions for save/find loadvm_handlers
> entry
> migration/savevm: Add new helpers to process the different stages of
> loadvm
> migration/savevm: Export two helper functions for savevm process
> COLO: Separate the process of saving/loading ram and device state
> COLO: Split qemu_savevm_state_begin out of checkpoint process
> filter-buffer: Accept zero interval
> net: Add notifier/callback for netdev init
> COLO/filter: add each netdev a buffer filter
> COLO: manage the status of buffer filters for PVM
> COLO: Add block replication into colo process
>
> configure | 11 +
> docs/qmp-events.txt | 16 +
> hmp-commands.hx | 15 +
> hmp.c | 15 +
> hmp.h | 1 +
> include/exec/ram_addr.h | 1 +
> include/migration/colo.h | 42 +++
> include/migration/failover.h | 33 ++
> include/migration/migration.h | 16 +
> include/migration/qemu-file.h | 3 +-
> include/net/filter.h | 2 +
> include/net/net.h | 3 +
> include/sysemu/sysemu.h | 9 +
> migration/Makefile.objs | 2 +
> migration/colo-comm.c | 79 ++++
> migration/colo-failover.c | 84 +++++
> migration/colo.c | 855 ++++++++++++++++++++++++++++++++++++++++++
> migration/migration.c | 90 ++++-
> migration/qemu-file-buf.c | 61 +++
> migration/ram.c | 175 ++++++++-
> migration/savevm.c | 114 ++++--
> net/filter-buffer.c | 12 -
> net/net.c | 12 +
> qapi-schema.json | 104 ++++-
> qapi/event.json | 15 +
> qmp-commands.hx | 24 +-
> stubs/Makefile.objs | 1 +
> stubs/migration-colo.c | 55 +++
> trace-events | 8 +
> vl.c | 31 +-
> 30 files changed, 1824 insertions(+), 65 deletions(-)
> create mode 100644 include/migration/colo.h
> create mode 100644 include/migration/failover.h
> create mode 100644 migration/colo-comm.c
> create mode 100644 migration/colo-failover.c
> create mode 100644 migration/colo.c
> create mode 100644 stubs/migration-colo.c
>
--
Thanks
zhangchen
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT)
2016-04-08 7:58 ` [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) Zhang Chen
@ 2016-04-08 8:49 ` Hailiang Zhang
0 siblings, 0 replies; 54+ messages in thread
From: Hailiang Zhang @ 2016-04-08 8:49 UTC (permalink / raw)
To: Zhang Chen, qemu-devel
Cc: peter.huangpeng, amit.shah, quintela, dgilbert, eblake,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, xiecl.fnst, armbru, Jason Wang
On 2016/4/8 15:58, Zhang Chen wrote:
>
>
> 在 04/08/2016 02:26 PM, zhanghailiang 写道:
>> This is the 16th version of COLO (Still only support periodic checkpoint).
>>
>> Here is only COLO frame part, you can get the whole codes from github:
>> https://github.com/coloft/qemu/commits/colo-v2.7-periodic-mode
>
Hi,
I have updated it in github.
Thanks,
Hailiang
> Hi~ Hailiang.
>
> I get a 404 not found, please update this new branch~
>
> Thanks
> Zhang Chen
>
>> There are little changes for this series except the netfilter releated part.
>>
>> Patch status:
>> Unreviewed: patch 21, 32 ~ 35
>> Updated: patch 7, 13, 32 ~ 35
>>
>> Cc: Jason Wang <jasowang@redhat.com>
>>
>> TODO:
>> 1. Checkpoint based on proxy in qemu
>> 2. The capability of continuous FT
>> 3. Optimize the VM's downtime during checkpoint
>>
>> v16:
>> - Fix compile broken due to missing osdep.h
>> - Add reviewed-by tag for patch 27, 28, 29
>> - Rename the COLO message send/receive helper function (patch 7, 13)
>> - Simplify the codes by using some notifier helpers in QEMU (patch 32)
>> - Remove the useless check in colo_add_buffer_filter() (patch 33)
>> - Remove the previous patch 36, 37 which export filter_buffer_flush()
>> to release the buffered packets for COLO, we simplify it by stopping
>> buffer filter while doing checkpoint, which will flush the buffered
>> packets by default. (patch 34)
>> v15:
>> - Go on the shutdown process if encounter error while sending shutdown
>> message to SVM. (patch 24)
>> - Rename qemu_need_skip_netfilter to qemu_netfilter_can_skip and Remove
>> some useless comment. (patch 31, Jason)
>> - Call object_new_with_props() directly to add filter in
>> colo_add_buffer_filter. (patch 34, Jason)
>> - Re-implement colo_set_filter_status() based on COLOBufferFilters
>> list. (patch 35)
>> - Re-implement colo_flush_filter_packets() based on COLOBufferFilters
>> list. (patch 37)
>> v14:
>> - Re-implement the network processing based on netfilter (Jason Wang)
>> - Rename 'COLOCommand' to 'COLOMessage'. (Markus's suggestion)
>> - Split two new patches (patch 27/28) from patch 29
>> - Fix some other comments from Dave and Markus.
>>
>> v13:
>> - Refactor colo_*_cmd helper functions to use 'Error **errp' parameter
>> instead of return value to indicate success or failure. (patch 10)
>> - Remove the optional error message for COLO_EXIT event. (patch 25)
>> - Use semaphore to notify colo/colo incoming loop that failover work is
>> finished. (patch 26)
>> - Move COLO shutdown related codes to colo.c file. (patch 28)
>> - Fix memory leak bug for colo incoming loop. (new patch 31)
>> - Re-use some existed helper functions to realize the process of
>> saving/loading ram and device. (patch 32)
>> - Fix some other comments from Dave and Markus.
>>
>> zhanghailiang (35):
>> configure: Add parameter for configure to enable/disable COLO support
>> migration: Introduce capability 'x-colo' to migration
>> COLO: migrate colo related info to secondary node
>> migration: Integrate COLO checkpoint process into migration
>> migration: Integrate COLO checkpoint process into loadvm
>> COLO/migration: Create a new communication path from destination to
>> source
>> COLO: Implement colo checkpoint protocol
>> COLO: Add a new RunState RUN_STATE_COLO
>> QEMUSizedBuffer: Introduce two help functions for qsb
>> COLO: Save PVM state to secondary side when do checkpoint
>> COLO: Load PVM's dirty pages into SVM's RAM cache temporarily
>> ram/COLO: Record the dirty pages that SVM received
>> COLO: Load VMState into qsb before restore it
>> COLO: Flush PVM's cached RAM into SVM's memory
>> COLO: Add checkpoint-delay parameter for migrate-set-parameters
>> COLO: synchronize PVM's state to SVM periodically
>> COLO failover: Introduce a new command to trigger a failover
>> COLO failover: Introduce state to record failover process
>> COLO: Implement failover work for Primary VM
>> COLO: Implement failover work for Secondary VM
>> qmp event: Add COLO_EXIT event to notify users while exited from COLO
>> COLO failover: Shutdown related socket fd when do failover
>> COLO failover: Don't do failover during loading VM's state
>> COLO: Process shutdown command for VM in COLO state
>> COLO: Update the global runstate after going into colo state
>> savevm: Introduce two helper functions for save/find loadvm_handlers
>> entry
>> migration/savevm: Add new helpers to process the different stages of
>> loadvm
>> migration/savevm: Export two helper functions for savevm process
>> COLO: Separate the process of saving/loading ram and device state
>> COLO: Split qemu_savevm_state_begin out of checkpoint process
>> filter-buffer: Accept zero interval
>> net: Add notifier/callback for netdev init
>> COLO/filter: add each netdev a buffer filter
>> COLO: manage the status of buffer filters for PVM
>> COLO: Add block replication into colo process
>>
>> configure | 11 +
>> docs/qmp-events.txt | 16 +
>> hmp-commands.hx | 15 +
>> hmp.c | 15 +
>> hmp.h | 1 +
>> include/exec/ram_addr.h | 1 +
>> include/migration/colo.h | 42 +++
>> include/migration/failover.h | 33 ++
>> include/migration/migration.h | 16 +
>> include/migration/qemu-file.h | 3 +-
>> include/net/filter.h | 2 +
>> include/net/net.h | 3 +
>> include/sysemu/sysemu.h | 9 +
>> migration/Makefile.objs | 2 +
>> migration/colo-comm.c | 79 ++++
>> migration/colo-failover.c | 84 +++++
>> migration/colo.c | 855 ++++++++++++++++++++++++++++++++++++++++++
>> migration/migration.c | 90 ++++-
>> migration/qemu-file-buf.c | 61 +++
>> migration/ram.c | 175 ++++++++-
>> migration/savevm.c | 114 ++++--
>> net/filter-buffer.c | 12 -
>> net/net.c | 12 +
>> qapi-schema.json | 104 ++++-
>> qapi/event.json | 15 +
>> qmp-commands.hx | 24 +-
>> stubs/Makefile.objs | 1 +
>> stubs/migration-colo.c | 55 +++
>> trace-events | 8 +
>> vl.c | 31 +-
>> 30 files changed, 1824 insertions(+), 65 deletions(-)
>> create mode 100644 include/migration/colo.h
>> create mode 100644 include/migration/failover.h
>> create mode 100644 migration/colo-comm.c
>> create mode 100644 migration/colo-failover.c
>> create mode 100644 migration/colo.c
>> create mode 100644 stubs/migration-colo.c
>>
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT)
2016-04-08 6:26 [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (35 preceding siblings ...)
2016-04-08 7:58 ` [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) Zhang Chen
@ 2016-04-22 10:42 ` Dr. David Alan Gilbert
2016-04-25 9:28 ` Hailiang Zhang
36 siblings, 1 reply; 54+ messages in thread
From: Dr. David Alan Gilbert @ 2016-04-22 10:42 UTC (permalink / raw)
To: zhanghailiang
Cc: qemu-devel, amit.shah, quintela, eblake, peter.huangpeng,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
Jason Wang
* zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
> This is the 16th version of COLO (Still only support periodic checkpoint).
OK, so the main migration code in here looks OK now (still need
one block R-b's and the net R-b's from Jason) - which of the other COLO
patch series does this depend on?
It doesn't need Zhang Chen's COLO-Compare - that's all for the later real colo world;
but I assume it depends on Changlong Xie's Block replication world?
Dave
>
> Here is only COLO frame part, you can get the whole codes from github:
> https://github.com/coloft/qemu/commits/colo-v2.7-periodic-mode
>
> There are little changes for this series except the netfilter releated part.
>
> Patch status:
> Unreviewed: patch 21, 32 ~ 35
> Updated: patch 7, 13, 32 ~ 35
>
> Cc: Jason Wang <jasowang@redhat.com>
>
> TODO:
> 1. Checkpoint based on proxy in qemu
> 2. The capability of continuous FT
> 3. Optimize the VM's downtime during checkpoint
>
> v16:
> - Fix compile broken due to missing osdep.h
> - Add reviewed-by tag for patch 27, 28, 29
> - Rename the COLO message send/receive helper function (patch 7, 13)
> - Simplify the codes by using some notifier helpers in QEMU (patch 32)
> - Remove the useless check in colo_add_buffer_filter() (patch 33)
> - Remove the previous patch 36, 37 which export filter_buffer_flush()
> to release the buffered packets for COLO, we simplify it by stopping
> buffer filter while doing checkpoint, which will flush the buffered
> packets by default. (patch 34)
> v15:
> - Go on the shutdown process if encounter error while sending shutdown
> message to SVM. (patch 24)
> - Rename qemu_need_skip_netfilter to qemu_netfilter_can_skip and Remove
> some useless comment. (patch 31, Jason)
> - Call object_new_with_props() directly to add filter in
> colo_add_buffer_filter. (patch 34, Jason)
> - Re-implement colo_set_filter_status() based on COLOBufferFilters
> list. (patch 35)
> - Re-implement colo_flush_filter_packets() based on COLOBufferFilters
> list. (patch 37)
> v14:
> - Re-implement the network processing based on netfilter (Jason Wang)
> - Rename 'COLOCommand' to 'COLOMessage'. (Markus's suggestion)
> - Split two new patches (patch 27/28) from patch 29
> - Fix some other comments from Dave and Markus.
>
> v13:
> - Refactor colo_*_cmd helper functions to use 'Error **errp' parameter
> instead of return value to indicate success or failure. (patch 10)
> - Remove the optional error message for COLO_EXIT event. (patch 25)
> - Use semaphore to notify colo/colo incoming loop that failover work is
> finished. (patch 26)
> - Move COLO shutdown related codes to colo.c file. (patch 28)
> - Fix memory leak bug for colo incoming loop. (new patch 31)
> - Re-use some existed helper functions to realize the process of
> saving/loading ram and device. (patch 32)
> - Fix some other comments from Dave and Markus.
>
> zhanghailiang (35):
> configure: Add parameter for configure to enable/disable COLO support
> migration: Introduce capability 'x-colo' to migration
> COLO: migrate colo related info to secondary node
> migration: Integrate COLO checkpoint process into migration
> migration: Integrate COLO checkpoint process into loadvm
> COLO/migration: Create a new communication path from destination to
> source
> COLO: Implement colo checkpoint protocol
> COLO: Add a new RunState RUN_STATE_COLO
> QEMUSizedBuffer: Introduce two help functions for qsb
> COLO: Save PVM state to secondary side when do checkpoint
> COLO: Load PVM's dirty pages into SVM's RAM cache temporarily
> ram/COLO: Record the dirty pages that SVM received
> COLO: Load VMState into qsb before restore it
> COLO: Flush PVM's cached RAM into SVM's memory
> COLO: Add checkpoint-delay parameter for migrate-set-parameters
> COLO: synchronize PVM's state to SVM periodically
> COLO failover: Introduce a new command to trigger a failover
> COLO failover: Introduce state to record failover process
> COLO: Implement failover work for Primary VM
> COLO: Implement failover work for Secondary VM
> qmp event: Add COLO_EXIT event to notify users while exited from COLO
> COLO failover: Shutdown related socket fd when do failover
> COLO failover: Don't do failover during loading VM's state
> COLO: Process shutdown command for VM in COLO state
> COLO: Update the global runstate after going into colo state
> savevm: Introduce two helper functions for save/find loadvm_handlers
> entry
> migration/savevm: Add new helpers to process the different stages of
> loadvm
> migration/savevm: Export two helper functions for savevm process
> COLO: Separate the process of saving/loading ram and device state
> COLO: Split qemu_savevm_state_begin out of checkpoint process
> filter-buffer: Accept zero interval
> net: Add notifier/callback for netdev init
> COLO/filter: add each netdev a buffer filter
> COLO: manage the status of buffer filters for PVM
> COLO: Add block replication into colo process
>
> configure | 11 +
> docs/qmp-events.txt | 16 +
> hmp-commands.hx | 15 +
> hmp.c | 15 +
> hmp.h | 1 +
> include/exec/ram_addr.h | 1 +
> include/migration/colo.h | 42 +++
> include/migration/failover.h | 33 ++
> include/migration/migration.h | 16 +
> include/migration/qemu-file.h | 3 +-
> include/net/filter.h | 2 +
> include/net/net.h | 3 +
> include/sysemu/sysemu.h | 9 +
> migration/Makefile.objs | 2 +
> migration/colo-comm.c | 79 ++++
> migration/colo-failover.c | 84 +++++
> migration/colo.c | 855 ++++++++++++++++++++++++++++++++++++++++++
> migration/migration.c | 90 ++++-
> migration/qemu-file-buf.c | 61 +++
> migration/ram.c | 175 ++++++++-
> migration/savevm.c | 114 ++++--
> net/filter-buffer.c | 12 -
> net/net.c | 12 +
> qapi-schema.json | 104 ++++-
> qapi/event.json | 15 +
> qmp-commands.hx | 24 +-
> stubs/Makefile.objs | 1 +
> stubs/migration-colo.c | 55 +++
> trace-events | 8 +
> vl.c | 31 +-
> 30 files changed, 1824 insertions(+), 65 deletions(-)
> create mode 100644 include/migration/colo.h
> create mode 100644 include/migration/failover.h
> create mode 100644 migration/colo-comm.c
> create mode 100644 migration/colo-failover.c
> create mode 100644 migration/colo.c
> create mode 100644 stubs/migration-colo.c
>
> --
> 1.8.3.1
>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [Qemu-devel] [PATCH COLO-Frame v16 for-2.7 00/35] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT)
2016-04-22 10:42 ` Dr. David Alan Gilbert
@ 2016-04-25 9:28 ` Hailiang Zhang
0 siblings, 0 replies; 54+ messages in thread
From: Hailiang Zhang @ 2016-04-25 9:28 UTC (permalink / raw)
To: Dr. David Alan Gilbert
Cc: peter.huangpeng, qemu-devel, amit.shah, quintela, eblake,
eddie.dong, yunhong.jiang, wency, lizhijian, arei.gonglei,
stefanha, hongyang.yang, zhangchen.fnst, xiecl.fnst, armbru,
Jason Wang
On 2016/4/22 18:42, Dr. David Alan Gilbert wrote:
> * zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
>> This is the 16th version of COLO (Still only support periodic checkpoint).
>
> OK, so the main migration code in here looks OK now (still need
> one block R-b's and the net R-b's from Jason) - which of the other COLO
> patch series does this depend on?
>
Yes, you are right.
> It doesn't need Zhang Chen's COLO-Compare - that's all for the later real colo world;
> but I assume it depends on Changlong Xie's Block replication world?
>
We need the Block part to realize the basic checkpoint capability. But it seems that
the reviewing process is too slow :( .
> Dave
>
>>
>> Here is only COLO frame part, you can get the whole codes from github:
>> https://github.com/coloft/qemu/commits/colo-v2.7-periodic-mode
>>
>> There are little changes for this series except the netfilter releated part.
>>
>> Patch status:
>> Unreviewed: patch 21, 32 ~ 35
>> Updated: patch 7, 13, 32 ~ 35
>>
>> Cc: Jason Wang <jasowang@redhat.com>
>>
>> TODO:
>> 1. Checkpoint based on proxy in qemu
>> 2. The capability of continuous FT
>> 3. Optimize the VM's downtime during checkpoint
>>
>> v16:
>> - Fix compile broken due to missing osdep.h
>> - Add reviewed-by tag for patch 27, 28, 29
>> - Rename the COLO message send/receive helper function (patch 7, 13)
>> - Simplify the codes by using some notifier helpers in QEMU (patch 32)
>> - Remove the useless check in colo_add_buffer_filter() (patch 33)
>> - Remove the previous patch 36, 37 which export filter_buffer_flush()
>> to release the buffered packets for COLO, we simplify it by stopping
>> buffer filter while doing checkpoint, which will flush the buffered
>> packets by default. (patch 34)
>> v15:
>> - Go on the shutdown process if encounter error while sending shutdown
>> message to SVM. (patch 24)
>> - Rename qemu_need_skip_netfilter to qemu_netfilter_can_skip and Remove
>> some useless comment. (patch 31, Jason)
>> - Call object_new_with_props() directly to add filter in
>> colo_add_buffer_filter. (patch 34, Jason)
>> - Re-implement colo_set_filter_status() based on COLOBufferFilters
>> list. (patch 35)
>> - Re-implement colo_flush_filter_packets() based on COLOBufferFilters
>> list. (patch 37)
>> v14:
>> - Re-implement the network processing based on netfilter (Jason Wang)
>> - Rename 'COLOCommand' to 'COLOMessage'. (Markus's suggestion)
>> - Split two new patches (patch 27/28) from patch 29
>> - Fix some other comments from Dave and Markus.
>>
>> v13:
>> - Refactor colo_*_cmd helper functions to use 'Error **errp' parameter
>> instead of return value to indicate success or failure. (patch 10)
>> - Remove the optional error message for COLO_EXIT event. (patch 25)
>> - Use semaphore to notify colo/colo incoming loop that failover work is
>> finished. (patch 26)
>> - Move COLO shutdown related codes to colo.c file. (patch 28)
>> - Fix memory leak bug for colo incoming loop. (new patch 31)
>> - Re-use some existed helper functions to realize the process of
>> saving/loading ram and device. (patch 32)
>> - Fix some other comments from Dave and Markus.
>>
>> zhanghailiang (35):
>> configure: Add parameter for configure to enable/disable COLO support
>> migration: Introduce capability 'x-colo' to migration
>> COLO: migrate colo related info to secondary node
>> migration: Integrate COLO checkpoint process into migration
>> migration: Integrate COLO checkpoint process into loadvm
>> COLO/migration: Create a new communication path from destination to
>> source
>> COLO: Implement colo checkpoint protocol
>> COLO: Add a new RunState RUN_STATE_COLO
>> QEMUSizedBuffer: Introduce two help functions for qsb
>> COLO: Save PVM state to secondary side when do checkpoint
>> COLO: Load PVM's dirty pages into SVM's RAM cache temporarily
>> ram/COLO: Record the dirty pages that SVM received
>> COLO: Load VMState into qsb before restore it
>> COLO: Flush PVM's cached RAM into SVM's memory
>> COLO: Add checkpoint-delay parameter for migrate-set-parameters
>> COLO: synchronize PVM's state to SVM periodically
>> COLO failover: Introduce a new command to trigger a failover
>> COLO failover: Introduce state to record failover process
>> COLO: Implement failover work for Primary VM
>> COLO: Implement failover work for Secondary VM
>> qmp event: Add COLO_EXIT event to notify users while exited from COLO
>> COLO failover: Shutdown related socket fd when do failover
>> COLO failover: Don't do failover during loading VM's state
>> COLO: Process shutdown command for VM in COLO state
>> COLO: Update the global runstate after going into colo state
>> savevm: Introduce two helper functions for save/find loadvm_handlers
>> entry
>> migration/savevm: Add new helpers to process the different stages of
>> loadvm
>> migration/savevm: Export two helper functions for savevm process
>> COLO: Separate the process of saving/loading ram and device state
>> COLO: Split qemu_savevm_state_begin out of checkpoint process
>> filter-buffer: Accept zero interval
>> net: Add notifier/callback for netdev init
>> COLO/filter: add each netdev a buffer filter
>> COLO: manage the status of buffer filters for PVM
>> COLO: Add block replication into colo process
>>
>> configure | 11 +
>> docs/qmp-events.txt | 16 +
>> hmp-commands.hx | 15 +
>> hmp.c | 15 +
>> hmp.h | 1 +
>> include/exec/ram_addr.h | 1 +
>> include/migration/colo.h | 42 +++
>> include/migration/failover.h | 33 ++
>> include/migration/migration.h | 16 +
>> include/migration/qemu-file.h | 3 +-
>> include/net/filter.h | 2 +
>> include/net/net.h | 3 +
>> include/sysemu/sysemu.h | 9 +
>> migration/Makefile.objs | 2 +
>> migration/colo-comm.c | 79 ++++
>> migration/colo-failover.c | 84 +++++
>> migration/colo.c | 855 ++++++++++++++++++++++++++++++++++++++++++
>> migration/migration.c | 90 ++++-
>> migration/qemu-file-buf.c | 61 +++
>> migration/ram.c | 175 ++++++++-
>> migration/savevm.c | 114 ++++--
>> net/filter-buffer.c | 12 -
>> net/net.c | 12 +
>> qapi-schema.json | 104 ++++-
>> qapi/event.json | 15 +
>> qmp-commands.hx | 24 +-
>> stubs/Makefile.objs | 1 +
>> stubs/migration-colo.c | 55 +++
>> trace-events | 8 +
>> vl.c | 31 +-
>> 30 files changed, 1824 insertions(+), 65 deletions(-)
>> create mode 100644 include/migration/colo.h
>> create mode 100644 include/migration/failover.h
>> create mode 100644 migration/colo-comm.c
>> create mode 100644 migration/colo-failover.c
>> create mode 100644 migration/colo.c
>> create mode 100644 stubs/migration-colo.c
>>
>> --
>> 1.8.3.1
>>
>>
> --
> Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
>
> .
>
^ permalink raw reply [flat|nested] 54+ messages in thread