From: Marcel Apfelbaum <marcel@redhat.com>
To: Igor Mammedov <imammedo@redhat.com>, qemu-devel@nongnu.org
Cc: mst@redhat.com
Subject: Re: [Qemu-devel] [PATCH v2 1/33] tests: acpi: report names of expected files in verbose mode
Date: Thu, 2 Jun 2016 14:02:40 +0300 [thread overview]
Message-ID: <57501250.20203@redhat.com> (raw)
In-Reply-To: <1464256005-75435-1-git-send-email-imammedo@redhat.com>
On 05/26/2016 12:46 PM, Igor Mammedov wrote:
> print expected file name if it doesn't exists if
> verbose mode is enabled*. It helps to avoid running
> bios-tables-test under debugger to figure out missing
> file name.
>
> *)
> verbose mode is enabled if "V" env. variable is set
>
> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> ---
> v2: replace 'for' loop with more readble 'goto'
> Marcel Apfelbaum <marcel@redhat.com>
> ---
> tests/bios-tables-test.c | 18 +++++++++++++-----
> 1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
> index 0352814..f0493f8 100644
> --- a/tests/bios-tables-test.c
> +++ b/tests/bios-tables-test.c
> @@ -464,7 +464,6 @@ static GArray *load_expected_aml(test_data *data)
> {
> int i;
> AcpiSdtTable *sdt;
> - gchar *aml_file = NULL;
> GError *error = NULL;
> gboolean ret;
>
> @@ -472,6 +471,7 @@ static GArray *load_expected_aml(test_data *data)
> for (i = 0; i < data->tables->len; ++i) {
> AcpiSdtTable exp_sdt;
> uint32_t signature;
> + gchar *aml_file = NULL;
> const char *ext = data->variant ? data->variant : "";
>
> sdt = &g_array_index(data->tables, AcpiSdtTable, i);
> @@ -484,13 +484,21 @@ static GArray *load_expected_aml(test_data *data)
> try_again:
> aml_file = g_strdup_printf("%s/%s/%.4s%s", data_dir, data->machine,
> (gchar *)&signature, ext);
> - if (data->variant && !g_file_test(aml_file, G_FILE_TEST_EXISTS)) {
> - g_free(aml_file);
> + if (getenv("V")) {
> + fprintf(stderr, "\nLooking for expected file '%s'\n", aml_file);
> + }
> + if (g_file_test(aml_file, G_FILE_TEST_EXISTS)) {
> + exp_sdt.aml_file = aml_file;
> + } else if (*ext != '\0') {
> + /* try fallback to generic (extention less) expected file */
:s/extention/extension
> ext = "";
> + g_free(aml_file);
> goto try_again;
> }
> - exp_sdt.aml_file = aml_file;
> - g_assert(g_file_test(aml_file, G_FILE_TEST_EXISTS));
> + g_assert(exp_sdt.aml_file);
> + if (getenv("V")) {
> + fprintf(stderr, "\nUsing expected file '%s'\n", aml_file);
> + }
> ret = g_file_get_contents(aml_file, &exp_sdt.aml,
> &exp_sdt.aml_len, &error);
> g_assert(ret);
>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Thanks,
Marcel
next prev parent reply other threads:[~2016-06-02 11:02 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-17 14:42 [Qemu-devel] [PATCH 00/33] ACPI CPU hotplug refactoring to support more than 255 CPUs and PXM/OST methods Igor Mammedov
2016-05-17 14:42 ` [Qemu-devel] [PATCH 01/33] tests: acpi: report names of expected files in verbose mode Igor Mammedov
2016-05-24 16:58 ` Marcel Apfelbaum
2016-05-26 9:46 ` [Qemu-devel] [PATCH v2 1/33] " Igor Mammedov
2016-05-30 18:14 ` Marcel Apfelbaum
2016-06-02 11:02 ` Marcel Apfelbaum [this message]
2016-05-17 14:42 ` [Qemu-devel] [PATCH 02/33] acpi: add aml_debug() Igor Mammedov
2016-05-24 16:59 ` Marcel Apfelbaum
2016-05-17 14:42 ` [Qemu-devel] [PATCH 03/33] acpi: add aml_refof() Igor Mammedov
2016-05-24 17:00 ` Marcel Apfelbaum
2016-05-17 14:42 ` [Qemu-devel] [PATCH 04/33] pc: acpi: remove AML for empty/not used GPE handlers Igor Mammedov
2016-05-25 9:11 ` Marcel Apfelbaum
2016-05-25 13:19 ` Igor Mammedov
2016-05-31 10:06 ` Marcel Apfelbaum
2016-05-17 14:42 ` [Qemu-devel] [PATCH 05/33] pc: acpi: consolidate CPU hotplug AML Igor Mammedov
2016-05-30 18:18 ` Marcel Apfelbaum
2016-05-31 7:50 ` Igor Mammedov
2016-05-31 10:18 ` Marcel Apfelbaum
2016-05-31 12:49 ` Igor Mammedov
2016-05-17 14:42 ` [Qemu-devel] [PATCH 06/33] pc: acpi: consolidate \GPE._E02 with the rest of " Igor Mammedov
2016-05-30 18:22 ` Marcel Apfelbaum
2016-05-17 14:42 ` [Qemu-devel] [PATCH 07/33] pc: acpi: cpu-hotplug: make AML CPU_foo defines local to cpu_hotplug_acpi_table.c Igor Mammedov
2016-05-30 18:23 ` Marcel Apfelbaum
2016-05-17 14:43 ` [Qemu-devel] [PATCH 08/33] pc: acpi: mark current CPU hotplug functions as legacy Igor Mammedov
2016-05-30 18:28 ` Marcel Apfelbaum
2016-05-17 14:43 ` [Qemu-devel] [PATCH 09/33] pc: acpi: consolidate legacy CPU hotplug in one file Igor Mammedov
2016-05-30 18:31 ` Marcel Apfelbaum
2016-05-17 14:43 ` [Qemu-devel] [PATCH 10/33] pc: acpi: simplify build_legacy_cpu_hotplug_aml() signature Igor Mammedov
2016-05-30 18:31 ` Marcel Apfelbaum
2016-05-17 14:43 ` [Qemu-devel] [PATCH 11/33] pc: acpi: cpuhp-legacy: switch ProcessorID to possible_cpus idx Igor Mammedov
2016-05-30 18:39 ` Marcel Apfelbaum
2016-05-31 13:03 ` Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 12/33] tests: acpi: update tables with consolidated legacy cpu-hotplug AML Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 13/33] acpi: extend ACPI interface to provide send_event hook Igor Mammedov
2016-05-30 18:45 ` Marcel Apfelbaum
2016-05-31 9:57 ` [Qemu-devel] [PATCH v2 " Igor Mammedov
2016-06-02 11:09 ` Marcel Apfelbaum
2016-06-02 11:19 ` Igor Mammedov
2016-06-02 11:21 ` Marcel Apfelbaum
2016-05-17 14:43 ` [Qemu-devel] [PATCH 14/33] pc: use AcpiDeviceIfClass.send_event to issue GPE events Igor Mammedov
2016-05-31 10:01 ` [Qemu-devel] [PATCH v2 " Igor Mammedov
2016-06-02 11:13 ` Marcel Apfelbaum
2016-06-02 11:29 ` Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 15/33] docs: update ACPI CPU hotplug spec with new protocol Igor Mammedov
2016-05-31 4:49 ` Michael S. Tsirkin
2016-05-31 15:07 ` Igor Mammedov
2016-05-31 21:09 ` Michael S. Tsirkin
2016-06-06 9:57 ` Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 16/33] acpi: hardware side of CPU hotplug Igor Mammedov
2016-05-30 18:50 ` Marcel Apfelbaum
2016-05-31 13:24 ` Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 17/33] pc: add generic CPU unplug callbacks Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 18/33] pc: add 2.7 machine Igor Mammedov
2016-05-30 18:53 ` Marcel Apfelbaum
2016-05-30 19:04 ` Eduardo Habkost
2016-05-17 14:43 ` [Qemu-devel] [PATCH 19/33] pc: piix4/ich9: add 'cpu-hotplug-legacy' property Igor Mammedov
2016-05-30 18:59 ` Marcel Apfelbaum
2016-05-17 14:43 ` [Qemu-devel] [PATCH 20/33] pc: q35: initialize new CPU hotplug hw Igor Mammedov
2016-05-30 19:02 ` Marcel Apfelbaum
2016-05-31 10:06 ` Igor Mammedov
2016-05-31 10:21 ` Marcel Apfelbaum
2016-05-31 12:51 ` Igor Mammedov
2016-05-31 12:52 ` Michael S. Tsirkin
2016-05-31 13:18 ` Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 21/33] pc: piix4: " Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 22/33] pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hook Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 23/33] acpi: add CPU devices AML to DSDT Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 24/33] acpi: add CPU hotplug methods " Igor Mammedov
2016-05-31 4:38 ` Michael S. Tsirkin
2016-05-31 8:45 ` Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 25/33] qdev: hotplug: Introduce HotplugHandler.pre_plug() callback Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 26/33] target-i386: add X86CPU.node property Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 27/33] pc: numa: replace node_cpu indexing by apic_id with possible_cpus index Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 28/33] pc: set X86CPU.node property if QEMU starts with numa enabled Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 29/33] acpi: cpuhp: provide cpu._PXM method if running in numa mode Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 30/33] acpi: cpuhp: add cpu._OST handling Igor Mammedov
2016-05-17 15:29 ` Eric Blake
2016-05-18 8:09 ` Igor Mammedov
2016-05-30 18:21 ` Michael S. Tsirkin
2016-05-31 12:53 ` Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 31/33] tests: acpi: update expected tables with new cpu-hotplug methods enabled by default Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 32/33] tests: acpi: add CPU hotplug testcase Igor Mammedov
2016-05-17 14:43 ` [Qemu-devel] [PATCH 33/33] tests: acpi: add DSDT/MADT expected tables for cpu-hotplug case Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57501250.20203@redhat.com \
--to=marcel@redhat.com \
--cc=imammedo@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).