From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To: "Cédric Le Goater" <clg@kaod.org>,
"David Gibson" <david@gibson.dropbear.id.au>
Cc: qemu-ppc@nongnu.org, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 0/3] ppc: complete the new HV mode
Date: Tue, 7 Jun 2016 09:24:42 +0100 [thread overview]
Message-ID: <575684CA.20609@ilande.co.uk> (raw)
In-Reply-To: <57567218.8090401@kaod.org>
On 07/06/16 08:04, Cédric Le Goater wrote:
>>>> 2. I have an old ibook G4 from which I dd'ed the disk. openbios
>>>> complains for some invalid state. is that supported ?
>>
>> Yes, OpenBIOS should boot most things these days (MorphOS is the only
>> execption I know of where the bootloader won't execute correctly as it
>> assumes real mode). The above message means that OpenBIOS couldn't find
>> a bootloader, or it could but was unable to execute it, e.g. due to
>> incompatible architecture - which OS is your image running?
>
> I am pretty sure it is a Mac OS X v10.5. I still have the hardware but it
> is running Linux now :
>
> # cat /proc/cpuinfo
> processor : 0
> cpu : 7447A, altivec supported
> clock : 1333.333000MHz
> revision : 1.5 (pvr 8003 0105)
> bogomips : 36.86
>
> total bogomips : 36.86
> timebase : 18432000
> platform : PowerMac
> model : PowerBook6,7
> machine : PowerBook6,7
> motherboard : PowerBook6,7 MacRISC3 Power Macintosh
> detected as : 287 (iBook G4)
> pmac flags : 0000001a
> L2 cache : 512K unified
> pmac-generation : NewWorld
> Memory : 1024 MB
>
> # lsprop /proc/device-tree/rom@ff800000/boot-rom@fff00000/
> reg fff00000 00100000
> info fff00000 00003f00 000493f0 20050705
> 815fda85 fff08000 00078001 000493f0
> 20050705 23765c6c fff80000 00080002
> 000493f0 20050705 b3364dca fff03f00
> 00000083 000493f0 20050705 c2b72d61
> fff03f80 00000084 e24a68ca 15a82001
> ffffffff fff04000 00004005 6e767261
> 6d000000 00000000 00000000 00000000
> [140 bytes total]
> name "boot-rom"
> security-modes 6e6f6e65 2c206675 6c6c2c20 636f6d6d
> 616e642c 206e6f2d 70617373 776f7264
> image 00080000 (524288)
> model "Apple PowerBook6,7 4.9.3f0 BootROM built on 07/05/05 at 11:14:11"
> write-characteristic
> "flash"
> hwi-flags 402a1220 (1076498976)
> BootROM-version "$0004.93f0"
> BootROM-build-date
> "07/05/05 at 11:14:11"
> linux,phandle ff89cb08
> has-config-block
>
>
>> Have you tried both mac99 and g3beige machines?
>
> yes.
(I'm wondering if we should start a new thread here either just on
qemu-ppc or over on the OpenBIOS list)
OpenBIOS will read hfs/hfsplus filesystems fine - I wonder if maybe it
can't locate a suitable partition in the Apple Partition Map?
If you boot to the Forth prompt with -prom-env 'auto-boot?=false' can
you try the following to see if you can list the disk contents:
dir hd:,\
If that doesn't work it means that the partition auto-detection is
failing, so try manually forcing the partition number until you find one
that works e.g.
dir hd:0,\
dir hd:1,\
etc.
up until around partition 10? Once you find one that works it should be
possible to boot that partition directly e.g.
boot hd:1
ATB,
Mark.
next prev parent reply other threads:[~2016-06-07 8:25 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-03 12:11 [Qemu-devel] [PATCH 0/3] ppc: complete the new HV mode Cédric Le Goater
2016-06-03 12:11 ` [Qemu-devel] [PATCH 1/3] ppc: Fix hreg_store_msr() so that non-HV mode cannot alter MSR:HV Cédric Le Goater
2016-06-03 12:11 ` [Qemu-devel] [PATCH 2/3] ppc: Better figure out if processor has HV mode Cédric Le Goater
2016-06-03 12:11 ` [Qemu-devel] [PATCH 3/3] ppc: fix hrfid, tlbia and slbia privilege Cédric Le Goater
2016-06-04 8:24 ` Thomas Huth
2016-06-06 1:10 ` David Gibson
2016-06-03 13:52 ` [Qemu-devel] [PATCH 0/3] ppc: complete the new HV mode Mark Cave-Ayland
2016-06-03 14:00 ` Cédric Le Goater
2016-06-03 14:06 ` Mark Cave-Ayland
2016-06-03 14:06 ` Cedric Le Goater
2016-06-03 14:14 ` Mark Cave-Ayland
2016-06-03 15:47 ` Mark Cave-Ayland
2016-06-03 17:54 ` Cédric Le Goater
2016-06-05 17:41 ` Cédric Le Goater
2016-06-05 22:26 ` Mark Cave-Ayland
2016-06-06 6:27 ` Cédric Le Goater
2016-06-06 6:30 ` Cedric Le Goater
2016-06-06 6:38 ` Mark Cave-Ayland
2016-06-07 7:04 ` Cédric Le Goater
2016-06-07 8:24 ` Mark Cave-Ayland [this message]
2016-06-06 1:47 ` David Gibson
2016-06-06 4:17 ` [Qemu-devel] [Qemu-ppc] " Benjamin Herrenschmidt
2016-06-06 7:28 ` Cédric Le Goater
2016-06-06 1:17 ` [Qemu-devel] " David Gibson
2016-06-06 3:55 ` Benjamin Herrenschmidt
2016-06-06 4:20 ` [Qemu-devel] [Qemu-ppc] " Benjamin Herrenschmidt
2016-06-06 6:29 ` Mark Cave-Ayland
2016-06-06 7:04 ` Benjamin Herrenschmidt
2016-06-06 7:06 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=575684CA.20609@ilande.co.uk \
--to=mark.cave-ayland@ilande.co.uk \
--cc=clg@kaod.org \
--cc=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).