From: Marcel Apfelbaum <marcel@redhat.com>
To: Eduardo Habkost <ehabkost@redhat.com>, qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Andrzej Zaborowski <balrogg@gmail.com>,
Peter Maydell <peter.maydell@linaro.org>,
"Michael S. Tsirkin" <mst@redhat.com>,
Alexander Graf <agraf@suse.de>
Subject: Re: [Qemu-devel] [PATCH] vl: Eliminate usb_enabled()
Date: Wed, 8 Jun 2016 14:25:41 +0300 [thread overview]
Message-ID: <575800B5.10608@redhat.com> (raw)
In-Reply-To: <1465318599-14137-1-git-send-email-ehabkost@redhat.com>
On 06/07/2016 07:56 PM, Eduardo Habkost wrote:
> This wrapper for machine_usb(current_machine) is not necessary,
> replace all usages of usb_enabled() with machine_usb().
>
> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
> ---
> hw/arm/nseries.c | 2 +-
> hw/arm/pxa2xx.c | 7 +++++--
> hw/arm/realview.c | 2 +-
> hw/arm/versatilepb.c | 2 +-
> hw/i386/pc_piix.c | 2 +-
> hw/i386/pc_q35.c | 2 +-
> hw/ppc/mac_oldworld.c | 2 +-
> hw/ppc/prep.c | 2 +-
> include/sysemu/sysemu.h | 1 -
> vl.c | 11 +++--------
> 10 files changed, 15 insertions(+), 18 deletions(-)
>
> diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
> index d4eb141..fea911e 100644
> --- a/hw/arm/nseries.c
> +++ b/hw/arm/nseries.c
> @@ -1351,7 +1351,7 @@ static void n8x0_init(MachineState *machine,
> n8x0_dss_setup(s);
> n8x0_cbus_setup(s);
> n8x0_uart_setup(s);
> - if (usb_enabled()) {
> + if (machine_usb(machine)) {
> n8x0_usb_setup(s);
> }
>
> diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
> index e41a7c9..6d8606d 100644
> --- a/hw/arm/pxa2xx.c
> +++ b/hw/arm/pxa2xx.c
> @@ -13,6 +13,7 @@
> #include "cpu.h"
> #include "hw/sysbus.h"
> #include "hw/arm/pxa.h"
> +#include "hw/boards.h"
> #include "sysemu/sysemu.h"
> #include "hw/char/serial.h"
> #include "hw/i2c/i2c.h"
Hi Eduardo,
> @@ -2062,6 +2063,7 @@ PXA2xxState *pxa270_init(MemoryRegion *address_space,
> int i;
> DriveInfo *dinfo;
> s = g_new0(PXA2xxState, 1);
> + MachineState *machine = MACHINE(qdev_get_machine());
>
All the callers of pxa270_init have a reference to the machine,
you can pass it as parameter IMO.
> if (revision && strncmp(revision, "pxa27", 5)) {
> fprintf(stderr, "Machine requires a PXA27x processor.\n");
> @@ -2165,7 +2167,7 @@ PXA2xxState *pxa270_init(MemoryRegion *address_space,
> s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
> }
>
> - if (usb_enabled()) {
> + if (machine_usb(machine)) {
> sysbus_create_simple("sysbus-ohci", 0x4c000000,
> qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
> }
> @@ -2201,6 +2203,7 @@ PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size)
> PXA2xxState *s;
> int i;
> DriveInfo *dinfo;
> + MachineState *machine = MACHINE(qdev_get_machine());
>
Same here.
Other than that it looks good to me.
Thanks,
Marcel
> s = g_new0(PXA2xxState, 1);
>
> @@ -2298,7 +2301,7 @@ PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size)
> s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
> }
>
> - if (usb_enabled()) {
> + if (machine_usb(machine)) {
> sysbus_create_simple("sysbus-ohci", 0x4c000000,
> qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
> }
> diff --git a/hw/arm/realview.c b/hw/arm/realview.c
> index 7d0aa6f..8eafcca 100644
> --- a/hw/arm/realview.c
> +++ b/hw/arm/realview.c
> @@ -254,7 +254,7 @@ static void realview_init(MachineState *machine,
> sysbus_connect_irq(busdev, 2, pic[50]);
> sysbus_connect_irq(busdev, 3, pic[51]);
> pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
> - if (usb_enabled()) {
> + if (machine_usb(machine)) {
> pci_create_simple(pci_bus, -1, "pci-ohci");
> }
> n = drive_get_max_bus(IF_SCSI);
> diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c
> index 20dd356..8ae5392 100644
> --- a/hw/arm/versatilepb.c
> +++ b/hw/arm/versatilepb.c
> @@ -276,7 +276,7 @@ static void versatile_init(MachineState *machine, int board_id)
> pci_nic_init_nofail(nd, pci_bus, "rtl8139", NULL);
> }
> }
> - if (usb_enabled()) {
> + if (machine_usb(machine)) {
> pci_create_simple(pci_bus, -1, "pci-ohci");
> }
> n = drive_get_max_bus(IF_SCSI);
> diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
> index a6a6604..d5eb063 100644
> --- a/hw/i386/pc_piix.c
> +++ b/hw/i386/pc_piix.c
> @@ -245,7 +245,7 @@ static void pc_init1(MachineState *machine,
>
> pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
>
> - if (pcmc->pci_enabled && usb_enabled()) {
> + if (pcmc->pci_enabled && machine_usb(machine)) {
> pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
> }
>
> diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c
> index 04aae89..31a6a59 100644
> --- a/hw/i386/pc_q35.c
> +++ b/hw/i386/pc_q35.c
> @@ -234,7 +234,7 @@ static void pc_q35_init(MachineState *machine)
> ide_drive_get(hd, ICH_AHCI(ahci)->ahci.ports);
> ahci_ide_create_devs(ahci, hd);
>
> - if (usb_enabled()) {
> + if (machine_usb(machine)) {
> /* Should we create 6 UHCI according to ich9 spec? */
> ehci_create_ich9_with_companions(host_bus, 0x1d);
> }
> diff --git a/hw/ppc/mac_oldworld.c b/hw/ppc/mac_oldworld.c
> index a9bb1c2..4479487 100644
> --- a/hw/ppc/mac_oldworld.c
> +++ b/hw/ppc/mac_oldworld.c
> @@ -309,7 +309,7 @@ static void ppc_heathrow_init(MachineState *machine)
> dev = qdev_create(adb_bus, TYPE_ADB_MOUSE);
> qdev_init_nofail(dev);
>
> - if (usb_enabled()) {
> + if (machine_usb(machine)) {
> pci_create_simple(pci_bus, -1, "pci-ohci");
> }
>
> diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
> index 07ffe72..054af1e 100644
> --- a/hw/ppc/prep.c
> +++ b/hw/ppc/prep.c
> @@ -649,7 +649,7 @@ static void ppc_prep_init(MachineState *machine)
> memory_region_add_subregion(sysmem, 0xFEFF0000, xcsr);
> #endif
>
> - if (usb_enabled()) {
> + if (machine_usb(machine)) {
> pci_create_simple(pci_bus, -1, "pci-ohci");
> }
>
> diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> index 9428141..7313673 100644
> --- a/include/sysemu/sysemu.h
> +++ b/include/sysemu/sysemu.h
> @@ -233,7 +233,6 @@ void qemu_boot_set(const char *boot_order, Error **errp);
> QemuOpts *qemu_get_machine_opts(void);
>
> bool defaults_enabled(void);
> -bool usb_enabled(void);
>
> extern QemuOptsList qemu_legacy_drive_opts;
> extern QemuOptsList qemu_common_drive_opts;
> diff --git a/vl.c b/vl.c
> index fafc7df..ee2dc36 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -1071,11 +1071,6 @@ bool defaults_enabled(void)
> return has_defaults;
> }
>
> -bool usb_enabled(void)
> -{
> - return machine_usb(current_machine);
> -}
> -
> #ifndef _WIN32
> static int parse_add_fd(void *opaque, QemuOpts *opts, Error **errp)
> {
> @@ -1392,7 +1387,7 @@ static int usb_device_add(const char *devname)
> const char *p;
> #endif
>
> - if (!usb_enabled()) {
> + if (!machine_usb(current_machine)) {
> return -1;
> }
>
> @@ -1424,7 +1419,7 @@ static int usb_device_del(const char *devname)
> return -1;
> }
>
> - if (!usb_enabled()) {
> + if (!machine_usb(current_machine)) {
> return -1;
> }
>
> @@ -4500,7 +4495,7 @@ int main(int argc, char **argv, char **envp)
> }
>
> /* init USB devices */
> - if (usb_enabled()) {
> + if (machine_usb(current_machine)) {
> if (foreach_device_config(DEV_USB, usb_parse) < 0)
> exit(1);
> }
>
next prev parent reply other threads:[~2016-06-08 11:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-07 16:56 [Qemu-devel] [PATCH] vl: Eliminate usb_enabled() Eduardo Habkost
2016-06-08 11:25 ` Marcel Apfelbaum [this message]
2016-06-08 11:48 ` Paolo Bonzini
2016-06-08 13:34 ` Peter Maydell
2016-06-08 17:13 ` Eduardo Habkost
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=575800B5.10608@redhat.com \
--to=marcel@redhat.com \
--cc=agraf@suse.de \
--cc=balrogg@gmail.com \
--cc=ehabkost@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).