From: Marcel Apfelbaum <marcel@redhat.com>
To: Igor Mammedov <imammedo@redhat.com>, qemu-devel@nongnu.org
Cc: mst@redhat.com
Subject: Re: [Qemu-devel] [PATCH 4/4] tests: acpi: extend cphp testcase with numa check
Date: Thu, 30 Jun 2016 15:52:57 +0300 [thread overview]
Message-ID: <57751629.608@redhat.com> (raw)
In-Reply-To: <1467289387-47575-5-git-send-email-imammedo@redhat.com>
On 06/30/2016 03:23 PM, Igor Mammedov wrote:
> so it would be possible to verify _PXM generation in
> DSDT and SRAT tables.
>
> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> ---
> NOTE to maintainer:
> SRAT table is included in patch as it doesn't have
> any chance for conflicts compared to often changing
> DSDT
>
> following table blobs should be updated in git tree as part
> of this commit after running ./tests/acpi-test-data/rebuild-expected-aml.sh
>
> tests/acpi-test-data/q35/DSDT.cphp
> tests/acpi-test-data/pc/DSDT.cphp
> ---
> tests/acpi-test-data/pc/SRAT.cphp | Bin 0 -> 304 bytes
> tests/acpi-test-data/q35/SRAT.cphp | Bin 0 -> 304 bytes
> tests/bios-tables-test.c | 6 ++++--
> 3 files changed, 4 insertions(+), 2 deletions(-)
> create mode 100644 tests/acpi-test-data/pc/SRAT.cphp
> create mode 100644 tests/acpi-test-data/q35/SRAT.cphp
>
> diff --git a/tests/acpi-test-data/pc/SRAT.cphp b/tests/acpi-test-data/pc/SRAT.cphp
> new file mode 100644
> index 0000000000000000000000000000000000000000..ff2137642f488ec70b85207ed6c20e7351d61e98
> GIT binary patch
> literal 304
> zcmWFzattwGWME)4bMklg2v%^42yhMtiUEZfKx_~V!f+sf!DmF1XF}yOvY_!<(fDl0
> pd`1npO;83GTmZW|po75R12aq^syaB21u74tQT&BzFU&Ml8UVWm2>}2A
>
> literal 0
> HcmV?d00001
>
> diff --git a/tests/acpi-test-data/q35/SRAT.cphp b/tests/acpi-test-data/q35/SRAT.cphp
> new file mode 100644
> index 0000000000000000000000000000000000000000..ff2137642f488ec70b85207ed6c20e7351d61e98
> GIT binary patch
> literal 304
> zcmWFzattwGWME)4bMklg2v%^42yhMtiUEZfKx_~V!f+sf!DmF1XF}yOvY_!<(fDl0
> pd`1npO;83GTmZW|po75R12aq^syaB21u74tQT&BzFU&Ml8UVWm2>}2A
>
> literal 0
> HcmV?d00001
>
> diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
> index de4019e..3796089 100644
> --- a/tests/bios-tables-test.c
> +++ b/tests/bios-tables-test.c
> @@ -809,7 +809,8 @@ static void test_acpi_piix4_tcg_cphp(void)
> data.machine = MACHINE_PC;
> data.variant = ".cphp";
> test_acpi_one("-machine accel=tcg"
> - " -smp 2,cores=3,sockets=2,maxcpus=6",
> + " -smp 2,cores=3,sockets=2,maxcpus=6"
> + " -numa node -numa node",
> &data);
> free_test_data(&data);
> }
> @@ -822,7 +823,8 @@ static void test_acpi_q35_tcg_cphp(void)
> data.machine = MACHINE_Q35;
> data.variant = ".cphp";
> test_acpi_one("-machine q35,accel=tcg"
> - " -smp 2,cores=3,sockets=2,maxcpus=6",
> + " -smp 2,cores=3,sockets=2,maxcpus=6"
> + " -numa node -numa node",
> &data);
> free_test_data(&data);
> }
>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Thanks,
Marcel
prev parent reply other threads:[~2016-06-30 12:53 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-30 12:23 [Qemu-devel] [PATCH 0/4] fix numa node mapping for hotplugged CPUs Igor Mammedov
2016-06-30 12:23 ` [Qemu-devel] [PATCH 1/4] tests: acpi: add CPU hotplug testcase Igor Mammedov
2016-06-30 12:42 ` Marcel Apfelbaum
2016-06-30 12:23 ` [Qemu-devel] [PATCH 2/4] tests: DO NOT APPLY: add APIC.cphp and DSDT.cphp blobs Igor Mammedov
2016-06-30 12:23 ` [Qemu-devel] [PATCH 3/4] acpi: provide _PXM method for CPU devices if QEMU is started numa enabled Igor Mammedov
2016-06-30 12:48 ` Marcel Apfelbaum
2016-06-30 13:01 ` Igor Mammedov
2016-06-30 13:11 ` Marcel Apfelbaum
2016-06-30 17:48 ` Michael S. Tsirkin
2016-06-30 13:29 ` [Qemu-devel] [PATCH v2 " Igor Mammedov
2016-06-30 17:47 ` [Qemu-devel] [PATCH " Michael S. Tsirkin
2016-07-01 8:12 ` Igor Mammedov
2016-06-30 12:23 ` [Qemu-devel] [PATCH 4/4] tests: acpi: extend cphp testcase with numa check Igor Mammedov
2016-06-30 12:52 ` Marcel Apfelbaum [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57751629.608@redhat.com \
--to=marcel@redhat.com \
--cc=imammedo@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).