Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Jike Song]

On 10/11/2016 05:47 PM, Paolo Bonzini wrote:
> 
> 
> On 11/10/2016 11:21, Xiao Guangrong wrote:
>>
>>
>> On 10/11/2016 04:54 PM, Paolo Bonzini wrote:
>>>
>>>
>>> On 11/10/2016 04:39, Xiao Guangrong wrote:
>>>>
>>>>
>>>> On 10/11/2016 02:32 AM, Paolo Bonzini wrote:
>>>>>
>>>>>
>>>>> On 10/10/2016 20:01, Neo Jia wrote:
>>>>>>> Hi Neo,
>>>>>>>
>>>>>>> AFAIK this is needed because KVMGT doesn't paravirtualize the PPGTT,
>>>>>>> while nVidia does.
>>>>>>
>>>>>> Hi Paolo and Xiaoguang,
>>>>>>
>>>>>> I am just wondering how device driver can register a notifier so he
>>>>>> can be
>>>>>> notified for write-protected pages when writes are happening.
>>>>>
>>>>> It can't yet, but the API is ready for that.  kvm_vfio_set_group is
>>>>> currently where a struct kvm_device* and struct vfio_group* touch.
>>>>> Given
>>>>> a struct kvm_device*, dev->kvm provides the struct kvm to be passed to
>>>>> kvm_page_track_register_notifier.  So I guess you could add a callback
>>>>> that passes the struct kvm_device* to the mdev device.
>>>>>
>>>>> Xiaoguang and Guangrong, what were your plans?  We discussed it briefly
>>>>> at KVM Forum but I don't remember the details.
>>>>
>>>> Your suggestion was that pass kvm fd to KVMGT via VFIO, so that we can
>>>> figure out the kvm instance based on the fd.
>>>>
>>>> We got a new idea, how about search the kvm instance by mm_struct, it
>>>> can work as KVMGT is running in the vcpu context and it is much more
>>>> straightforward.
>>>
>>> Perhaps I didn't understand your suggestion, but the same mm_struct can
>>> have more than 1 struct kvm so I'm not sure that it can work.
>>
>> vcpu->pid is valid during vcpu running so that it can be used to figure
>> out which kvm instance owns the vcpu whose pid is the one as current
>> thread, i think it can work. :)
> 
> No, don't do that.  There's no reason for a thread to run a single VCPU,
> and if you can have multiple VCPUs you can also have multiple VCPUs from
> multiple VMs.
> 
> Passing file descriptors around are the right way to connect subsystems.

[CC Alex, Kevin and Qemu-devel]

Hi Paolo & Alex,

IIUC, passing file descriptors means touching QEMU and the UAPI between
QEMU and VFIO. Would you guys have a look at below draft patch? If it's
on the correct direction, I'll send the split ones. Thanks!

--
Thanks,
Jike


diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
index bec694c..f715d37 100644
--- a/hw/vfio/pci-quirks.c
+++ b/hw/vfio/pci-quirks.c
@@ -10,12 +10,14 @@
  * the COPYING file in the top-level directory.
  */
 
+#include <sys/ioctl.h>
 #include "qemu/osdep.h"
 #include "qemu/error-report.h"
 #include "qemu/range.h"
 #include "qapi/error.h"
 #include "hw/nvram/fw_cfg.h"
 #include "pci.h"
+#include "sysemu/kvm.h"
 #include "trace.h"
 
 /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
@@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
         break;
     }
 }
+
+void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
+{
+    int vmfd;
+
+    if (!kvm_enabled() || !vdev->kvmgt)
+        return;
+
+    /* Tell the device what KVM it attached */
+    vmfd = kvm_get_vmfd(kvm_state);
+    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
+}
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index a5a620a..8732552 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -2561,6 +2561,8 @@ static int vfio_initfn(PCIDevice *pdev)
         return ret;
     }
 
+    vfio_quirk_kvmgt(vdev);
+
     /* Get a copy of config space */
     ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
                 MIN(pci_config_size(&vdev->pdev), vdev->config_size),
@@ -2832,6 +2834,7 @@ static Property vfio_pci_dev_properties[] = {
     DEFINE_PROP_UINT32("x-pci-sub-device-id", VFIOPCIDevice,
                        sub_device_id, PCI_ANY_ID),
     DEFINE_PROP_UINT32("x-igd-gms", VFIOPCIDevice, igd_gms, 0),
+    DEFINE_PROP_BOOL("kvmgt", VFIOPCIDevice, kvmgt, false),
     /*
      * TODO - support passed fds... is this necessary?
      * DEFINE_PROP_STRING("vfiofd", VFIOPCIDevice, vfiofd_name),
diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index 7d482d9..813832c 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -143,6 +143,7 @@ typedef struct VFIOPCIDevice {
     bool no_kvm_intx;
     bool no_kvm_msi;
     bool no_kvm_msix;
+    bool kvmgt;
 } VFIOPCIDevice;
 
 uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
@@ -166,4 +167,6 @@ int vfio_populate_vga(VFIOPCIDevice *vdev);
 int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
                                struct vfio_region_info *info);
 
+void vfio_quirk_kvmgt(VFIOPCIDevice *vdev);
+
 #endif /* HW_VFIO_VFIO_PCI_H */
diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index df67cc0..dd8320a 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -254,6 +254,7 @@ void phys_mem_set_alloc(void *(*alloc)(size_t, uint64_t *align));
 int kvm_ioctl(KVMState *s, int type, ...);
 
 int kvm_vm_ioctl(KVMState *s, int type, ...);
+int kvm_get_vmfd(KVMState *s);
 
 int kvm_vcpu_ioctl(CPUState *cpu, int type, ...);
 
diff --git a/kvm-all.c b/kvm-all.c
index efb5fe3..bd72ce3 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -2065,6 +2065,11 @@ int kvm_vm_ioctl(KVMState *s, int type, ...)
     return ret;
 }
 
+int kvm_get_vmfd(KVMState *s)
+{
+	return s->vmfd;
+}
+
 int kvm_vcpu_ioctl(CPUState *cpu, int type, ...)
 {
     int ret;
diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
index 759b850..952303f 100644
--- a/linux-headers/linux/vfio.h
+++ b/linux-headers/linux/vfio.h
@@ -686,6 +686,12 @@ struct vfio_iommu_spapr_tce_remove {
 };
 #define VFIO_IOMMU_SPAPR_TCE_REMOVE	_IO(VFIO_TYPE, VFIO_BASE + 20)
 
+
+/**
+ * VFIO_SET_KVMFD - _IO(VFIO_TYPE, VFIO_BASE + 21, __u32)
+ */
+#define VFIO_SET_KVMFD		_IO(VFIO_TYPE, VFIO_BASE + 21)
+
 /* ***************************************************************** */
 
 #endif /* VFIO_H */

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Paolo Bonzini]

On 14/10/2016 12:37, Jike Song wrote:
> Hi Paolo & Alex,
> 
> IIUC, passing file descriptors means touching QEMU and the UAPI between
> QEMU and VFIO. Would you guys have a look at below draft patch? If it's
> on the correct direction, I'll send the split ones. Thanks!
> 
> --
> Thanks,
> Jike
> 
> 
> diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
> index bec694c..f715d37 100644
> --- a/hw/vfio/pci-quirks.c
> +++ b/hw/vfio/pci-quirks.c
> @@ -10,12 +10,14 @@
>   * the COPYING file in the top-level directory.
>   */
>  
> +#include <sys/ioctl.h>
>  #include "qemu/osdep.h"
>  #include "qemu/error-report.h"
>  #include "qemu/range.h"
>  #include "qapi/error.h"
>  #include "hw/nvram/fw_cfg.h"
>  #include "pci.h"
> +#include "sysemu/kvm.h"
>  #include "trace.h"
>  
>  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
> @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
>          break;
>      }
>  }
> +
> +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
> +{
> +    int vmfd;
> +
> +    if (!kvm_enabled() || !vdev->kvmgt)
> +        return;
> +
> +    /* Tell the device what KVM it attached */
> +    vmfd = kvm_get_vmfd(kvm_state);
> +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
> +}

vfio_kvm_device_add_group is already telling the group id file
descriptor to KVM.  You can use that existing hook (whose kernel side is
virt/kvm/vfio.c).

Paolo

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Jike Song]

On 10/14/2016 06:43 PM, Paolo Bonzini wrote:
> 
> 
> On 14/10/2016 12:37, Jike Song wrote:
>> Hi Paolo & Alex,
>>
>> IIUC, passing file descriptors means touching QEMU and the UAPI between
>> QEMU and VFIO. Would you guys have a look at below draft patch? If it's
>> on the correct direction, I'll send the split ones. Thanks!
>>
>> --
>> Thanks,
>> Jike
>>
>>
>> diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
>> index bec694c..f715d37 100644
>> --- a/hw/vfio/pci-quirks.c
>> +++ b/hw/vfio/pci-quirks.c
>> @@ -10,12 +10,14 @@
>>   * the COPYING file in the top-level directory.
>>   */
>>  
>> +#include <sys/ioctl.h>
>>  #include "qemu/osdep.h"
>>  #include "qemu/error-report.h"
>>  #include "qemu/range.h"
>>  #include "qapi/error.h"
>>  #include "hw/nvram/fw_cfg.h"
>>  #include "pci.h"
>> +#include "sysemu/kvm.h"
>>  #include "trace.h"
>>  
>>  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
>> @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
>>          break;
>>      }
>>  }
>> +
>> +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
>> +{
>> +    int vmfd;
>> +
>> +    if (!kvm_enabled() || !vdev->kvmgt)
>> +        return;
>> +
>> +    /* Tell the device what KVM it attached */
>> +    vmfd = kvm_get_vmfd(kvm_state);
>> +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
>> +}
> 
> vfio_kvm_device_add_group is already telling the group id file
> descriptor to KVM.  You can use that existing hook (whose kernel side is
> virt/kvm/vfio.c).

Thanks for quick reply. I'll do some homework and report back :)

--
Thanks,
Jike

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Alex Williamson]

On Fri, 14 Oct 2016 18:37:45 +0800
Jike Song <jike.song@intel.com> wrote:

> On 10/11/2016 05:47 PM, Paolo Bonzini wrote:
> > 
> > 
> > On 11/10/2016 11:21, Xiao Guangrong wrote:  
> >>
> >>
> >> On 10/11/2016 04:54 PM, Paolo Bonzini wrote:  
> >>>
> >>>
> >>> On 11/10/2016 04:39, Xiao Guangrong wrote:  
> >>>>
> >>>>
> >>>> On 10/11/2016 02:32 AM, Paolo Bonzini wrote:  
> >>>>>
> >>>>>
> >>>>> On 10/10/2016 20:01, Neo Jia wrote:  
> >>>>>>> Hi Neo,
> >>>>>>>
> >>>>>>> AFAIK this is needed because KVMGT doesn't paravirtualize the PPGTT,
> >>>>>>> while nVidia does.  
> >>>>>>
> >>>>>> Hi Paolo and Xiaoguang,
> >>>>>>
> >>>>>> I am just wondering how device driver can register a notifier so he
> >>>>>> can be
> >>>>>> notified for write-protected pages when writes are happening.  
> >>>>>
> >>>>> It can't yet, but the API is ready for that.  kvm_vfio_set_group is
> >>>>> currently where a struct kvm_device* and struct vfio_group* touch.
> >>>>> Given
> >>>>> a struct kvm_device*, dev->kvm provides the struct kvm to be passed to
> >>>>> kvm_page_track_register_notifier.  So I guess you could add a callback
> >>>>> that passes the struct kvm_device* to the mdev device.
> >>>>>
> >>>>> Xiaoguang and Guangrong, what were your plans?  We discussed it briefly
> >>>>> at KVM Forum but I don't remember the details.  
> >>>>
> >>>> Your suggestion was that pass kvm fd to KVMGT via VFIO, so that we can
> >>>> figure out the kvm instance based on the fd.
> >>>>
> >>>> We got a new idea, how about search the kvm instance by mm_struct, it
> >>>> can work as KVMGT is running in the vcpu context and it is much more
> >>>> straightforward.  
> >>>
> >>> Perhaps I didn't understand your suggestion, but the same mm_struct can
> >>> have more than 1 struct kvm so I'm not sure that it can work.  
> >>
> >> vcpu->pid is valid during vcpu running so that it can be used to figure
> >> out which kvm instance owns the vcpu whose pid is the one as current
> >> thread, i think it can work. :)  
> > 
> > No, don't do that.  There's no reason for a thread to run a single VCPU,
> > and if you can have multiple VCPUs you can also have multiple VCPUs from
> > multiple VMs.
> > 
> > Passing file descriptors around are the right way to connect subsystems.  
> 
> [CC Alex, Kevin and Qemu-devel]
> 
> Hi Paolo & Alex,
> 
> IIUC, passing file descriptors means touching QEMU and the UAPI between
> QEMU and VFIO. Would you guys have a look at below draft patch? If it's
> on the correct direction, I'll send the split ones. Thanks!
> 
> --
> Thanks,
> Jike
> 
> 
> diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
> index bec694c..f715d37 100644
> --- a/hw/vfio/pci-quirks.c
> +++ b/hw/vfio/pci-quirks.c
> @@ -10,12 +10,14 @@
>   * the COPYING file in the top-level directory.
>   */
>  
> +#include <sys/ioctl.h>
>  #include "qemu/osdep.h"
>  #include "qemu/error-report.h"
>  #include "qemu/range.h"
>  #include "qapi/error.h"
>  #include "hw/nvram/fw_cfg.h"
>  #include "pci.h"
> +#include "sysemu/kvm.h"
>  #include "trace.h"
>  
>  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
> @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
>          break;
>      }
>  }
> +
> +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
> +{
> +    int vmfd;
> +
> +    if (!kvm_enabled() || !vdev->kvmgt)
> +        return;
> +
> +    /* Tell the device what KVM it attached */
> +    vmfd = kvm_get_vmfd(kvm_state);
> +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
> +}
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index a5a620a..8732552 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -2561,6 +2561,8 @@ static int vfio_initfn(PCIDevice *pdev)
>          return ret;
>      }
>  
> +    vfio_quirk_kvmgt(vdev);
> +
>      /* Get a copy of config space */
>      ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
>                  MIN(pci_config_size(&vdev->pdev), vdev->config_size),
> @@ -2832,6 +2834,7 @@ static Property vfio_pci_dev_properties[] = {
>      DEFINE_PROP_UINT32("x-pci-sub-device-id", VFIOPCIDevice,
>                         sub_device_id, PCI_ANY_ID),
>      DEFINE_PROP_UINT32("x-igd-gms", VFIOPCIDevice, igd_gms, 0),
> +    DEFINE_PROP_BOOL("kvmgt", VFIOPCIDevice, kvmgt, false),

Just a side note, device options are a headache, users are prone to get
them wrong and minimally it requires an entire round to get libvirt
support.  We should be able to detect from the device or vfio API
whether such a call is required.  Obviously if we can use the existing
kvm-vfio device, that's the better option anyway.  Thanks,

Alex

>      /*
>       * TODO - support passed fds... is this necessary?
>       * DEFINE_PROP_STRING("vfiofd", VFIOPCIDevice, vfiofd_name),
> diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
> index 7d482d9..813832c 100644
> --- a/hw/vfio/pci.h
> +++ b/hw/vfio/pci.h
> @@ -143,6 +143,7 @@ typedef struct VFIOPCIDevice {
>      bool no_kvm_intx;
>      bool no_kvm_msi;
>      bool no_kvm_msix;
> +    bool kvmgt;
>  } VFIOPCIDevice;
>  
>  uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
> @@ -166,4 +167,6 @@ int vfio_populate_vga(VFIOPCIDevice *vdev);
>  int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
>                                 struct vfio_region_info *info);
>  
> +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev);
> +
>  #endif /* HW_VFIO_VFIO_PCI_H */
> diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
> index df67cc0..dd8320a 100644
> --- a/include/sysemu/kvm.h
> +++ b/include/sysemu/kvm.h
> @@ -254,6 +254,7 @@ void phys_mem_set_alloc(void *(*alloc)(size_t, uint64_t *align));
>  int kvm_ioctl(KVMState *s, int type, ...);
>  
>  int kvm_vm_ioctl(KVMState *s, int type, ...);
> +int kvm_get_vmfd(KVMState *s);
>  
>  int kvm_vcpu_ioctl(CPUState *cpu, int type, ...);
>  
> diff --git a/kvm-all.c b/kvm-all.c
> index efb5fe3..bd72ce3 100644
> --- a/kvm-all.c
> +++ b/kvm-all.c
> @@ -2065,6 +2065,11 @@ int kvm_vm_ioctl(KVMState *s, int type, ...)
>      return ret;
>  }
>  
> +int kvm_get_vmfd(KVMState *s)
> +{
> +	return s->vmfd;
> +}
> +
>  int kvm_vcpu_ioctl(CPUState *cpu, int type, ...)
>  {
>      int ret;
> diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
> index 759b850..952303f 100644
> --- a/linux-headers/linux/vfio.h
> +++ b/linux-headers/linux/vfio.h
> @@ -686,6 +686,12 @@ struct vfio_iommu_spapr_tce_remove {
>  };
>  #define VFIO_IOMMU_SPAPR_TCE_REMOVE	_IO(VFIO_TYPE, VFIO_BASE + 20)
>  
> +
> +/**
> + * VFIO_SET_KVMFD - _IO(VFIO_TYPE, VFIO_BASE + 21, __u32)
> + */
> +#define VFIO_SET_KVMFD		_IO(VFIO_TYPE, VFIO_BASE + 21)
> +
>  /* ***************************************************************** */
>  
>  #endif /* VFIO_H */
> 

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Alex Williamson]

On Fri, 14 Oct 2016 08:41:58 -0600
Alex Williamson <alex.williamson@redhat.com> wrote:

> On Fri, 14 Oct 2016 18:37:45 +0800
> Jike Song <jike.song@intel.com> wrote:
> 
> > On 10/11/2016 05:47 PM, Paolo Bonzini wrote:  
> > > 
> > > 
> > > On 11/10/2016 11:21, Xiao Guangrong wrote:    
> > >>
> > >>
> > >> On 10/11/2016 04:54 PM, Paolo Bonzini wrote:    
> > >>>
> > >>>
> > >>> On 11/10/2016 04:39, Xiao Guangrong wrote:    
> > >>>>
> > >>>>
> > >>>> On 10/11/2016 02:32 AM, Paolo Bonzini wrote:    
> > >>>>>
> > >>>>>
> > >>>>> On 10/10/2016 20:01, Neo Jia wrote:    
> > >>>>>>> Hi Neo,
> > >>>>>>>
> > >>>>>>> AFAIK this is needed because KVMGT doesn't paravirtualize the PPGTT,
> > >>>>>>> while nVidia does.    
> > >>>>>>
> > >>>>>> Hi Paolo and Xiaoguang,
> > >>>>>>
> > >>>>>> I am just wondering how device driver can register a notifier so he
> > >>>>>> can be
> > >>>>>> notified for write-protected pages when writes are happening.    
> > >>>>>
> > >>>>> It can't yet, but the API is ready for that.  kvm_vfio_set_group is
> > >>>>> currently where a struct kvm_device* and struct vfio_group* touch.
> > >>>>> Given
> > >>>>> a struct kvm_device*, dev->kvm provides the struct kvm to be passed to
> > >>>>> kvm_page_track_register_notifier.  So I guess you could add a callback
> > >>>>> that passes the struct kvm_device* to the mdev device.
> > >>>>>
> > >>>>> Xiaoguang and Guangrong, what were your plans?  We discussed it briefly
> > >>>>> at KVM Forum but I don't remember the details.    
> > >>>>
> > >>>> Your suggestion was that pass kvm fd to KVMGT via VFIO, so that we can
> > >>>> figure out the kvm instance based on the fd.
> > >>>>
> > >>>> We got a new idea, how about search the kvm instance by mm_struct, it
> > >>>> can work as KVMGT is running in the vcpu context and it is much more
> > >>>> straightforward.    
> > >>>
> > >>> Perhaps I didn't understand your suggestion, but the same mm_struct can
> > >>> have more than 1 struct kvm so I'm not sure that it can work.    
> > >>
> > >> vcpu->pid is valid during vcpu running so that it can be used to figure
> > >> out which kvm instance owns the vcpu whose pid is the one as current
> > >> thread, i think it can work. :)    
> > > 
> > > No, don't do that.  There's no reason for a thread to run a single VCPU,
> > > and if you can have multiple VCPUs you can also have multiple VCPUs from
> > > multiple VMs.
> > > 
> > > Passing file descriptors around are the right way to connect subsystems.    
> > 
> > [CC Alex, Kevin and Qemu-devel]
> > 
> > Hi Paolo & Alex,
> > 
> > IIUC, passing file descriptors means touching QEMU and the UAPI between
> > QEMU and VFIO. Would you guys have a look at below draft patch? If it's
> > on the correct direction, I'll send the split ones. Thanks!
> > 
> > --
> > Thanks,
> > Jike
> > 
> > 
> > diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
> > index bec694c..f715d37 100644
> > --- a/hw/vfio/pci-quirks.c
> > +++ b/hw/vfio/pci-quirks.c
> > @@ -10,12 +10,14 @@
> >   * the COPYING file in the top-level directory.
> >   */
> >  
> > +#include <sys/ioctl.h>
> >  #include "qemu/osdep.h"
> >  #include "qemu/error-report.h"
> >  #include "qemu/range.h"
> >  #include "qapi/error.h"
> >  #include "hw/nvram/fw_cfg.h"
> >  #include "pci.h"
> > +#include "sysemu/kvm.h"
> >  #include "trace.h"
> >  
> >  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
> > @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
> >          break;
> >      }
> >  }
> > +
> > +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
> > +{
> > +    int vmfd;
> > +
> > +    if (!kvm_enabled() || !vdev->kvmgt)
> > +        return;
> > +
> > +    /* Tell the device what KVM it attached */
> > +    vmfd = kvm_get_vmfd(kvm_state);
> > +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
> > +}
> > diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> > index a5a620a..8732552 100644
> > --- a/hw/vfio/pci.c
> > +++ b/hw/vfio/pci.c
> > @@ -2561,6 +2561,8 @@ static int vfio_initfn(PCIDevice *pdev)
> >          return ret;
> >      }
> >  
> > +    vfio_quirk_kvmgt(vdev);
> > +
> >      /* Get a copy of config space */
> >      ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
> >                  MIN(pci_config_size(&vdev->pdev), vdev->config_size),
> > @@ -2832,6 +2834,7 @@ static Property vfio_pci_dev_properties[] = {
> >      DEFINE_PROP_UINT32("x-pci-sub-device-id", VFIOPCIDevice,
> >                         sub_device_id, PCI_ANY_ID),
> >      DEFINE_PROP_UINT32("x-igd-gms", VFIOPCIDevice, igd_gms, 0),
> > +    DEFINE_PROP_BOOL("kvmgt", VFIOPCIDevice, kvmgt, false),  
> 
> Just a side note, device options are a headache, users are prone to get
> them wrong and minimally it requires an entire round to get libvirt
> support.  We should be able to detect from the device or vfio API
> whether such a call is required.  Obviously if we can use the existing
> kvm-vfio device, that's the better option anyway.  Thanks,

Also, vfio devices currently have no hard dependencies on KVM, if kvmgt
does, it needs to produce a device failure when unavailable.  Thanks,

Alex

> >      /*
> >       * TODO - support passed fds... is this necessary?
> >       * DEFINE_PROP_STRING("vfiofd", VFIOPCIDevice, vfiofd_name),
> > diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
> > index 7d482d9..813832c 100644
> > --- a/hw/vfio/pci.h
> > +++ b/hw/vfio/pci.h
> > @@ -143,6 +143,7 @@ typedef struct VFIOPCIDevice {
> >      bool no_kvm_intx;
> >      bool no_kvm_msi;
> >      bool no_kvm_msix;
> > +    bool kvmgt;
> >  } VFIOPCIDevice;
> >  
> >  uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
> > @@ -166,4 +167,6 @@ int vfio_populate_vga(VFIOPCIDevice *vdev);
> >  int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
> >                                 struct vfio_region_info *info);
> >  
> > +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev);
> > +
> >  #endif /* HW_VFIO_VFIO_PCI_H */
> > diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
> > index df67cc0..dd8320a 100644
> > --- a/include/sysemu/kvm.h
> > +++ b/include/sysemu/kvm.h
> > @@ -254,6 +254,7 @@ void phys_mem_set_alloc(void *(*alloc)(size_t, uint64_t *align));
> >  int kvm_ioctl(KVMState *s, int type, ...);
> >  
> >  int kvm_vm_ioctl(KVMState *s, int type, ...);
> > +int kvm_get_vmfd(KVMState *s);
> >  
> >  int kvm_vcpu_ioctl(CPUState *cpu, int type, ...);
> >  
> > diff --git a/kvm-all.c b/kvm-all.c
> > index efb5fe3..bd72ce3 100644
> > --- a/kvm-all.c
> > +++ b/kvm-all.c
> > @@ -2065,6 +2065,11 @@ int kvm_vm_ioctl(KVMState *s, int type, ...)
> >      return ret;
> >  }
> >  
> > +int kvm_get_vmfd(KVMState *s)
> > +{
> > +	return s->vmfd;
> > +}
> > +
> >  int kvm_vcpu_ioctl(CPUState *cpu, int type, ...)
> >  {
> >      int ret;
> > diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
> > index 759b850..952303f 100644
> > --- a/linux-headers/linux/vfio.h
> > +++ b/linux-headers/linux/vfio.h
> > @@ -686,6 +686,12 @@ struct vfio_iommu_spapr_tce_remove {
> >  };
> >  #define VFIO_IOMMU_SPAPR_TCE_REMOVE	_IO(VFIO_TYPE, VFIO_BASE + 20)
> >  
> > +
> > +/**
> > + * VFIO_SET_KVMFD - _IO(VFIO_TYPE, VFIO_BASE + 21, __u32)
> > + */
> > +#define VFIO_SET_KVMFD		_IO(VFIO_TYPE, VFIO_BASE + 21)
> > +
> >  /* ***************************************************************** */
> >  
> >  #endif /* VFIO_H */
> >   
> 

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Neo Jia]

On Fri, Oct 14, 2016 at 08:46:01AM -0600, Alex Williamson wrote:
> On Fri, 14 Oct 2016 08:41:58 -0600
> Alex Williamson <alex.williamson@redhat.com> wrote:
> 
> > On Fri, 14 Oct 2016 18:37:45 +0800
> > Jike Song <jike.song@intel.com> wrote:
> > 
> > > On 10/11/2016 05:47 PM, Paolo Bonzini wrote:  
> > > > 
> > > > 
> > > > On 11/10/2016 11:21, Xiao Guangrong wrote:    
> > > >>
> > > >>
> > > >> On 10/11/2016 04:54 PM, Paolo Bonzini wrote:    
> > > >>>
> > > >>>
> > > >>> On 11/10/2016 04:39, Xiao Guangrong wrote:    
> > > >>>>
> > > >>>>
> > > >>>> On 10/11/2016 02:32 AM, Paolo Bonzini wrote:    
> > > >>>>>
> > > >>>>>
> > > >>>>> On 10/10/2016 20:01, Neo Jia wrote:    
> > > >>>>>>> Hi Neo,
> > > >>>>>>>
> > > >>>>>>> AFAIK this is needed because KVMGT doesn't paravirtualize the PPGTT,
> > > >>>>>>> while nVidia does.    
> > > >>>>>>
> > > >>>>>> Hi Paolo and Xiaoguang,
> > > >>>>>>
> > > >>>>>> I am just wondering how device driver can register a notifier so he
> > > >>>>>> can be
> > > >>>>>> notified for write-protected pages when writes are happening.    
> > > >>>>>
> > > >>>>> It can't yet, but the API is ready for that.  kvm_vfio_set_group is
> > > >>>>> currently where a struct kvm_device* and struct vfio_group* touch.
> > > >>>>> Given
> > > >>>>> a struct kvm_device*, dev->kvm provides the struct kvm to be passed to
> > > >>>>> kvm_page_track_register_notifier.  So I guess you could add a callback
> > > >>>>> that passes the struct kvm_device* to the mdev device.
> > > >>>>>
> > > >>>>> Xiaoguang and Guangrong, what were your plans?  We discussed it briefly
> > > >>>>> at KVM Forum but I don't remember the details.    
> > > >>>>
> > > >>>> Your suggestion was that pass kvm fd to KVMGT via VFIO, so that we can
> > > >>>> figure out the kvm instance based on the fd.
> > > >>>>
> > > >>>> We got a new idea, how about search the kvm instance by mm_struct, it
> > > >>>> can work as KVMGT is running in the vcpu context and it is much more
> > > >>>> straightforward.    
> > > >>>
> > > >>> Perhaps I didn't understand your suggestion, but the same mm_struct can
> > > >>> have more than 1 struct kvm so I'm not sure that it can work.    
> > > >>
> > > >> vcpu->pid is valid during vcpu running so that it can be used to figure
> > > >> out which kvm instance owns the vcpu whose pid is the one as current
> > > >> thread, i think it can work. :)    
> > > > 
> > > > No, don't do that.  There's no reason for a thread to run a single VCPU,
> > > > and if you can have multiple VCPUs you can also have multiple VCPUs from
> > > > multiple VMs.
> > > > 
> > > > Passing file descriptors around are the right way to connect subsystems.    
> > > 
> > > [CC Alex, Kevin and Qemu-devel]
> > > 
> > > Hi Paolo & Alex,
> > > 
> > > IIUC, passing file descriptors means touching QEMU and the UAPI between
> > > QEMU and VFIO. Would you guys have a look at below draft patch? If it's
> > > on the correct direction, I'll send the split ones. Thanks!
> > > 
> > > --
> > > Thanks,
> > > Jike
> > > 
> > > 
> > > diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
> > > index bec694c..f715d37 100644
> > > --- a/hw/vfio/pci-quirks.c
> > > +++ b/hw/vfio/pci-quirks.c
> > > @@ -10,12 +10,14 @@
> > >   * the COPYING file in the top-level directory.
> > >   */
> > >  
> > > +#include <sys/ioctl.h>
> > >  #include "qemu/osdep.h"
> > >  #include "qemu/error-report.h"
> > >  #include "qemu/range.h"
> > >  #include "qapi/error.h"
> > >  #include "hw/nvram/fw_cfg.h"
> > >  #include "pci.h"
> > > +#include "sysemu/kvm.h"
> > >  #include "trace.h"
> > >  
> > >  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
> > > @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
> > >          break;
> > >      }
> > >  }
> > > +
> > > +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
> > > +{
> > > +    int vmfd;
> > > +
> > > +    if (!kvm_enabled() || !vdev->kvmgt)
> > > +        return;
> > > +
> > > +    /* Tell the device what KVM it attached */
> > > +    vmfd = kvm_get_vmfd(kvm_state);
> > > +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
> > > +}
> > > diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> > > index a5a620a..8732552 100644
> > > --- a/hw/vfio/pci.c
> > > +++ b/hw/vfio/pci.c
> > > @@ -2561,6 +2561,8 @@ static int vfio_initfn(PCIDevice *pdev)
> > >          return ret;
> > >      }
> > >  
> > > +    vfio_quirk_kvmgt(vdev);
> > > +
> > >      /* Get a copy of config space */
> > >      ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
> > >                  MIN(pci_config_size(&vdev->pdev), vdev->config_size),
> > > @@ -2832,6 +2834,7 @@ static Property vfio_pci_dev_properties[] = {
> > >      DEFINE_PROP_UINT32("x-pci-sub-device-id", VFIOPCIDevice,
> > >                         sub_device_id, PCI_ANY_ID),
> > >      DEFINE_PROP_UINT32("x-igd-gms", VFIOPCIDevice, igd_gms, 0),
> > > +    DEFINE_PROP_BOOL("kvmgt", VFIOPCIDevice, kvmgt, false),  
> > 
> > Just a side note, device options are a headache, users are prone to get
> > them wrong and minimally it requires an entire round to get libvirt
> > support.  We should be able to detect from the device or vfio API
> > whether such a call is required.  Obviously if we can use the existing
> > kvm-vfio device, that's the better option anyway.  Thanks,
> 
> Also, vfio devices currently have no hard dependencies on KVM, if kvmgt
> does, it needs to produce a device failure when unavailable.  Thanks,

Also, I would like to see this as an generic feature instead of
kvmgt specific interface, so we don't have to add new options to QEMU and it is
up to the vendor driver to proceed with or without it.

Thanks,
Neo

> 
> Alex
> 
> > >      /*
> > >       * TODO - support passed fds... is this necessary?
> > >       * DEFINE_PROP_STRING("vfiofd", VFIOPCIDevice, vfiofd_name),
> > > diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
> > > index 7d482d9..813832c 100644
> > > --- a/hw/vfio/pci.h
> > > +++ b/hw/vfio/pci.h
> > > @@ -143,6 +143,7 @@ typedef struct VFIOPCIDevice {
> > >      bool no_kvm_intx;
> > >      bool no_kvm_msi;
> > >      bool no_kvm_msix;
> > > +    bool kvmgt;
> > >  } VFIOPCIDevice;
> > >  
> > >  uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
> > > @@ -166,4 +167,6 @@ int vfio_populate_vga(VFIOPCIDevice *vdev);
> > >  int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
> > >                                 struct vfio_region_info *info);
> > >  
> > > +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev);
> > > +
> > >  #endif /* HW_VFIO_VFIO_PCI_H */
> > > diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
> > > index df67cc0..dd8320a 100644
> > > --- a/include/sysemu/kvm.h
> > > +++ b/include/sysemu/kvm.h
> > > @@ -254,6 +254,7 @@ void phys_mem_set_alloc(void *(*alloc)(size_t, uint64_t *align));
> > >  int kvm_ioctl(KVMState *s, int type, ...);
> > >  
> > >  int kvm_vm_ioctl(KVMState *s, int type, ...);
> > > +int kvm_get_vmfd(KVMState *s);
> > >  
> > >  int kvm_vcpu_ioctl(CPUState *cpu, int type, ...);
> > >  
> > > diff --git a/kvm-all.c b/kvm-all.c
> > > index efb5fe3..bd72ce3 100644
> > > --- a/kvm-all.c
> > > +++ b/kvm-all.c
> > > @@ -2065,6 +2065,11 @@ int kvm_vm_ioctl(KVMState *s, int type, ...)
> > >      return ret;
> > >  }
> > >  
> > > +int kvm_get_vmfd(KVMState *s)
> > > +{
> > > +	return s->vmfd;
> > > +}
> > > +
> > >  int kvm_vcpu_ioctl(CPUState *cpu, int type, ...)
> > >  {
> > >      int ret;
> > > diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
> > > index 759b850..952303f 100644
> > > --- a/linux-headers/linux/vfio.h
> > > +++ b/linux-headers/linux/vfio.h
> > > @@ -686,6 +686,12 @@ struct vfio_iommu_spapr_tce_remove {
> > >  };
> > >  #define VFIO_IOMMU_SPAPR_TCE_REMOVE	_IO(VFIO_TYPE, VFIO_BASE + 20)
> > >  
> > > +
> > > +/**
> > > + * VFIO_SET_KVMFD - _IO(VFIO_TYPE, VFIO_BASE + 21, __u32)
> > > + */
> > > +#define VFIO_SET_KVMFD		_IO(VFIO_TYPE, VFIO_BASE + 21)
> > > +
> > >  /* ***************************************************************** */
> > >  
> > >  #endif /* VFIO_H */
> > >   
> > 
> 

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Alex Williamson]

On Fri, 14 Oct 2016 09:35:45 -0700
Neo Jia <cjia@nvidia.com> wrote:

> On Fri, Oct 14, 2016 at 08:46:01AM -0600, Alex Williamson wrote:
> > On Fri, 14 Oct 2016 08:41:58 -0600
> > Alex Williamson <alex.williamson@redhat.com> wrote:
> >   
> > > On Fri, 14 Oct 2016 18:37:45 +0800
> > > Jike Song <jike.song@intel.com> wrote:
> > >   
> > > > On 10/11/2016 05:47 PM, Paolo Bonzini wrote:    
> > > > > 
> > > > > 
> > > > > On 11/10/2016 11:21, Xiao Guangrong wrote:      
> > > > >>
> > > > >>
> > > > >> On 10/11/2016 04:54 PM, Paolo Bonzini wrote:      
> > > > >>>
> > > > >>>
> > > > >>> On 11/10/2016 04:39, Xiao Guangrong wrote:      
> > > > >>>>
> > > > >>>>
> > > > >>>> On 10/11/2016 02:32 AM, Paolo Bonzini wrote:      
> > > > >>>>>
> > > > >>>>>
> > > > >>>>> On 10/10/2016 20:01, Neo Jia wrote:      
> > > > >>>>>>> Hi Neo,
> > > > >>>>>>>
> > > > >>>>>>> AFAIK this is needed because KVMGT doesn't paravirtualize the PPGTT,
> > > > >>>>>>> while nVidia does.      
> > > > >>>>>>
> > > > >>>>>> Hi Paolo and Xiaoguang,
> > > > >>>>>>
> > > > >>>>>> I am just wondering how device driver can register a notifier so he
> > > > >>>>>> can be
> > > > >>>>>> notified for write-protected pages when writes are happening.      
> > > > >>>>>
> > > > >>>>> It can't yet, but the API is ready for that.  kvm_vfio_set_group is
> > > > >>>>> currently where a struct kvm_device* and struct vfio_group* touch.
> > > > >>>>> Given
> > > > >>>>> a struct kvm_device*, dev->kvm provides the struct kvm to be passed to
> > > > >>>>> kvm_page_track_register_notifier.  So I guess you could add a callback
> > > > >>>>> that passes the struct kvm_device* to the mdev device.
> > > > >>>>>
> > > > >>>>> Xiaoguang and Guangrong, what were your plans?  We discussed it briefly
> > > > >>>>> at KVM Forum but I don't remember the details.      
> > > > >>>>
> > > > >>>> Your suggestion was that pass kvm fd to KVMGT via VFIO, so that we can
> > > > >>>> figure out the kvm instance based on the fd.
> > > > >>>>
> > > > >>>> We got a new idea, how about search the kvm instance by mm_struct, it
> > > > >>>> can work as KVMGT is running in the vcpu context and it is much more
> > > > >>>> straightforward.      
> > > > >>>
> > > > >>> Perhaps I didn't understand your suggestion, but the same mm_struct can
> > > > >>> have more than 1 struct kvm so I'm not sure that it can work.      
> > > > >>
> > > > >> vcpu->pid is valid during vcpu running so that it can be used to figure
> > > > >> out which kvm instance owns the vcpu whose pid is the one as current
> > > > >> thread, i think it can work. :)      
> > > > > 
> > > > > No, don't do that.  There's no reason for a thread to run a single VCPU,
> > > > > and if you can have multiple VCPUs you can also have multiple VCPUs from
> > > > > multiple VMs.
> > > > > 
> > > > > Passing file descriptors around are the right way to connect subsystems.      
> > > > 
> > > > [CC Alex, Kevin and Qemu-devel]
> > > > 
> > > > Hi Paolo & Alex,
> > > > 
> > > > IIUC, passing file descriptors means touching QEMU and the UAPI between
> > > > QEMU and VFIO. Would you guys have a look at below draft patch? If it's
> > > > on the correct direction, I'll send the split ones. Thanks!
> > > > 
> > > > --
> > > > Thanks,
> > > > Jike
> > > > 
> > > > 
> > > > diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
> > > > index bec694c..f715d37 100644
> > > > --- a/hw/vfio/pci-quirks.c
> > > > +++ b/hw/vfio/pci-quirks.c
> > > > @@ -10,12 +10,14 @@
> > > >   * the COPYING file in the top-level directory.
> > > >   */
> > > >  
> > > > +#include <sys/ioctl.h>
> > > >  #include "qemu/osdep.h"
> > > >  #include "qemu/error-report.h"
> > > >  #include "qemu/range.h"
> > > >  #include "qapi/error.h"
> > > >  #include "hw/nvram/fw_cfg.h"
> > > >  #include "pci.h"
> > > > +#include "sysemu/kvm.h"
> > > >  #include "trace.h"
> > > >  
> > > >  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
> > > > @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
> > > >          break;
> > > >      }
> > > >  }
> > > > +
> > > > +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
> > > > +{
> > > > +    int vmfd;
> > > > +
> > > > +    if (!kvm_enabled() || !vdev->kvmgt)
> > > > +        return;
> > > > +
> > > > +    /* Tell the device what KVM it attached */
> > > > +    vmfd = kvm_get_vmfd(kvm_state);
> > > > +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
> > > > +}
> > > > diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> > > > index a5a620a..8732552 100644
> > > > --- a/hw/vfio/pci.c
> > > > +++ b/hw/vfio/pci.c
> > > > @@ -2561,6 +2561,8 @@ static int vfio_initfn(PCIDevice *pdev)
> > > >          return ret;
> > > >      }
> > > >  
> > > > +    vfio_quirk_kvmgt(vdev);
> > > > +
> > > >      /* Get a copy of config space */
> > > >      ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
> > > >                  MIN(pci_config_size(&vdev->pdev), vdev->config_size),
> > > > @@ -2832,6 +2834,7 @@ static Property vfio_pci_dev_properties[] = {
> > > >      DEFINE_PROP_UINT32("x-pci-sub-device-id", VFIOPCIDevice,
> > > >                         sub_device_id, PCI_ANY_ID),
> > > >      DEFINE_PROP_UINT32("x-igd-gms", VFIOPCIDevice, igd_gms, 0),
> > > > +    DEFINE_PROP_BOOL("kvmgt", VFIOPCIDevice, kvmgt, false),    
> > > 
> > > Just a side note, device options are a headache, users are prone to get
> > > them wrong and minimally it requires an entire round to get libvirt
> > > support.  We should be able to detect from the device or vfio API
> > > whether such a call is required.  Obviously if we can use the existing
> > > kvm-vfio device, that's the better option anyway.  Thanks,  
> > 
> > Also, vfio devices currently have no hard dependencies on KVM, if kvmgt
> > does, it needs to produce a device failure when unavailable.  Thanks,  
> 
> Also, I would like to see this as an generic feature instead of
> kvmgt specific interface, so we don't have to add new options to QEMU and it is
> up to the vendor driver to proceed with or without it.

In general this should be decided by lack of some required feature
exclusively provided by KVM.  I would not want to add a generic opt-out
for mdev vendor drivers to decide that they arbitrarily want to disable
that path.  Thanks,

Alex

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Neo Jia]

On Fri, Oct 14, 2016 at 10:51:24AM -0600, Alex Williamson wrote:
> On Fri, 14 Oct 2016 09:35:45 -0700
> Neo Jia <cjia@nvidia.com> wrote:
> 
> > On Fri, Oct 14, 2016 at 08:46:01AM -0600, Alex Williamson wrote:
> > > On Fri, 14 Oct 2016 08:41:58 -0600
> > > Alex Williamson <alex.williamson@redhat.com> wrote:
> > >   
> > > > On Fri, 14 Oct 2016 18:37:45 +0800
> > > > Jike Song <jike.song@intel.com> wrote:
> > > >   
> > > > > On 10/11/2016 05:47 PM, Paolo Bonzini wrote:    
> > > > > > 
> > > > > > 
> > > > > > On 11/10/2016 11:21, Xiao Guangrong wrote:      
> > > > > >>
> > > > > >>
> > > > > >> On 10/11/2016 04:54 PM, Paolo Bonzini wrote:      
> > > > > >>>
> > > > > >>>
> > > > > >>> On 11/10/2016 04:39, Xiao Guangrong wrote:      
> > > > > >>>>
> > > > > >>>>
> > > > > >>>> On 10/11/2016 02:32 AM, Paolo Bonzini wrote:      
> > > > > >>>>>
> > > > > >>>>>
> > > > > >>>>> On 10/10/2016 20:01, Neo Jia wrote:      
> > > > > >>>>>>> Hi Neo,
> > > > > >>>>>>>
> > > > > >>>>>>> AFAIK this is needed because KVMGT doesn't paravirtualize the PPGTT,
> > > > > >>>>>>> while nVidia does.      
> > > > > >>>>>>
> > > > > >>>>>> Hi Paolo and Xiaoguang,
> > > > > >>>>>>
> > > > > >>>>>> I am just wondering how device driver can register a notifier so he
> > > > > >>>>>> can be
> > > > > >>>>>> notified for write-protected pages when writes are happening.      
> > > > > >>>>>
> > > > > >>>>> It can't yet, but the API is ready for that.  kvm_vfio_set_group is
> > > > > >>>>> currently where a struct kvm_device* and struct vfio_group* touch.
> > > > > >>>>> Given
> > > > > >>>>> a struct kvm_device*, dev->kvm provides the struct kvm to be passed to
> > > > > >>>>> kvm_page_track_register_notifier.  So I guess you could add a callback
> > > > > >>>>> that passes the struct kvm_device* to the mdev device.
> > > > > >>>>>
> > > > > >>>>> Xiaoguang and Guangrong, what were your plans?  We discussed it briefly
> > > > > >>>>> at KVM Forum but I don't remember the details.      
> > > > > >>>>
> > > > > >>>> Your suggestion was that pass kvm fd to KVMGT via VFIO, so that we can
> > > > > >>>> figure out the kvm instance based on the fd.
> > > > > >>>>
> > > > > >>>> We got a new idea, how about search the kvm instance by mm_struct, it
> > > > > >>>> can work as KVMGT is running in the vcpu context and it is much more
> > > > > >>>> straightforward.      
> > > > > >>>
> > > > > >>> Perhaps I didn't understand your suggestion, but the same mm_struct can
> > > > > >>> have more than 1 struct kvm so I'm not sure that it can work.      
> > > > > >>
> > > > > >> vcpu->pid is valid during vcpu running so that it can be used to figure
> > > > > >> out which kvm instance owns the vcpu whose pid is the one as current
> > > > > >> thread, i think it can work. :)      
> > > > > > 
> > > > > > No, don't do that.  There's no reason for a thread to run a single VCPU,
> > > > > > and if you can have multiple VCPUs you can also have multiple VCPUs from
> > > > > > multiple VMs.
> > > > > > 
> > > > > > Passing file descriptors around are the right way to connect subsystems.      
> > > > > 
> > > > > [CC Alex, Kevin and Qemu-devel]
> > > > > 
> > > > > Hi Paolo & Alex,
> > > > > 
> > > > > IIUC, passing file descriptors means touching QEMU and the UAPI between
> > > > > QEMU and VFIO. Would you guys have a look at below draft patch? If it's
> > > > > on the correct direction, I'll send the split ones. Thanks!
> > > > > 
> > > > > --
> > > > > Thanks,
> > > > > Jike
> > > > > 
> > > > > 
> > > > > diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
> > > > > index bec694c..f715d37 100644
> > > > > --- a/hw/vfio/pci-quirks.c
> > > > > +++ b/hw/vfio/pci-quirks.c
> > > > > @@ -10,12 +10,14 @@
> > > > >   * the COPYING file in the top-level directory.
> > > > >   */
> > > > >  
> > > > > +#include <sys/ioctl.h>
> > > > >  #include "qemu/osdep.h"
> > > > >  #include "qemu/error-report.h"
> > > > >  #include "qemu/range.h"
> > > > >  #include "qapi/error.h"
> > > > >  #include "hw/nvram/fw_cfg.h"
> > > > >  #include "pci.h"
> > > > > +#include "sysemu/kvm.h"
> > > > >  #include "trace.h"
> > > > >  
> > > > >  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
> > > > > @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
> > > > >          break;
> > > > >      }
> > > > >  }
> > > > > +
> > > > > +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
> > > > > +{
> > > > > +    int vmfd;
> > > > > +
> > > > > +    if (!kvm_enabled() || !vdev->kvmgt)
> > > > > +        return;
> > > > > +
> > > > > +    /* Tell the device what KVM it attached */
> > > > > +    vmfd = kvm_get_vmfd(kvm_state);
> > > > > +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
> > > > > +}
> > > > > diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> > > > > index a5a620a..8732552 100644
> > > > > --- a/hw/vfio/pci.c
> > > > > +++ b/hw/vfio/pci.c
> > > > > @@ -2561,6 +2561,8 @@ static int vfio_initfn(PCIDevice *pdev)
> > > > >          return ret;
> > > > >      }
> > > > >  
> > > > > +    vfio_quirk_kvmgt(vdev);
> > > > > +
> > > > >      /* Get a copy of config space */
> > > > >      ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
> > > > >                  MIN(pci_config_size(&vdev->pdev), vdev->config_size),
> > > > > @@ -2832,6 +2834,7 @@ static Property vfio_pci_dev_properties[] = {
> > > > >      DEFINE_PROP_UINT32("x-pci-sub-device-id", VFIOPCIDevice,
> > > > >                         sub_device_id, PCI_ANY_ID),
> > > > >      DEFINE_PROP_UINT32("x-igd-gms", VFIOPCIDevice, igd_gms, 0),
> > > > > +    DEFINE_PROP_BOOL("kvmgt", VFIOPCIDevice, kvmgt, false),    
> > > > 
> > > > Just a side note, device options are a headache, users are prone to get
> > > > them wrong and minimally it requires an entire round to get libvirt
> > > > support.  We should be able to detect from the device or vfio API
> > > > whether such a call is required.  Obviously if we can use the existing
> > > > kvm-vfio device, that's the better option anyway.  Thanks,  
> > > 
> > > Also, vfio devices currently have no hard dependencies on KVM, if kvmgt
> > > does, it needs to produce a device failure when unavailable.  Thanks,  
> > 
> > Also, I would like to see this as an generic feature instead of
> > kvmgt specific interface, so we don't have to add new options to QEMU and it is
> > up to the vendor driver to proceed with or without it.
> 
> In general this should be decided by lack of some required feature
> exclusively provided by KVM.  I would not want to add a generic opt-out
> for mdev vendor drivers to decide that they arbitrarily want to disable
> that path.  Thanks,

IIUC, you are suggesting that this path should be controlled by KVM feature cap
and it will be accessible to VFIO users when such checking is satisfied.

Thanks,
Neo

> 
> Alex

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Alex Williamson]

On Fri, 14 Oct 2016 15:19:01 -0700
Neo Jia <cjia@nvidia.com> wrote:

> On Fri, Oct 14, 2016 at 10:51:24AM -0600, Alex Williamson wrote:
> > On Fri, 14 Oct 2016 09:35:45 -0700
> > Neo Jia <cjia@nvidia.com> wrote:
> >   
> > > On Fri, Oct 14, 2016 at 08:46:01AM -0600, Alex Williamson wrote:  
> > > > On Fri, 14 Oct 2016 08:41:58 -0600
> > > > Alex Williamson <alex.williamson@redhat.com> wrote:
> > > >     
> > > > > On Fri, 14 Oct 2016 18:37:45 +0800
> > > > > Jike Song <jike.song@intel.com> wrote:
> > > > >     
> > > > > > On 10/11/2016 05:47 PM, Paolo Bonzini wrote:      
> > > > > > > 
> > > > > > > 
> > > > > > > On 11/10/2016 11:21, Xiao Guangrong wrote:        
> > > > > > >>
> > > > > > >>
> > > > > > >> On 10/11/2016 04:54 PM, Paolo Bonzini wrote:        
> > > > > > >>>
> > > > > > >>>
> > > > > > >>> On 11/10/2016 04:39, Xiao Guangrong wrote:        
> > > > > > >>>>
> > > > > > >>>>
> > > > > > >>>> On 10/11/2016 02:32 AM, Paolo Bonzini wrote:        
> > > > > > >>>>>
> > > > > > >>>>>
> > > > > > >>>>> On 10/10/2016 20:01, Neo Jia wrote:        
> > > > > > >>>>>>> Hi Neo,
> > > > > > >>>>>>>
> > > > > > >>>>>>> AFAIK this is needed because KVMGT doesn't paravirtualize the PPGTT,
> > > > > > >>>>>>> while nVidia does.        
> > > > > > >>>>>>
> > > > > > >>>>>> Hi Paolo and Xiaoguang,
> > > > > > >>>>>>
> > > > > > >>>>>> I am just wondering how device driver can register a notifier so he
> > > > > > >>>>>> can be
> > > > > > >>>>>> notified for write-protected pages when writes are happening.        
> > > > > > >>>>>
> > > > > > >>>>> It can't yet, but the API is ready for that.  kvm_vfio_set_group is
> > > > > > >>>>> currently where a struct kvm_device* and struct vfio_group* touch.
> > > > > > >>>>> Given
> > > > > > >>>>> a struct kvm_device*, dev->kvm provides the struct kvm to be passed to
> > > > > > >>>>> kvm_page_track_register_notifier.  So I guess you could add a callback
> > > > > > >>>>> that passes the struct kvm_device* to the mdev device.
> > > > > > >>>>>
> > > > > > >>>>> Xiaoguang and Guangrong, what were your plans?  We discussed it briefly
> > > > > > >>>>> at KVM Forum but I don't remember the details.        
> > > > > > >>>>
> > > > > > >>>> Your suggestion was that pass kvm fd to KVMGT via VFIO, so that we can
> > > > > > >>>> figure out the kvm instance based on the fd.
> > > > > > >>>>
> > > > > > >>>> We got a new idea, how about search the kvm instance by mm_struct, it
> > > > > > >>>> can work as KVMGT is running in the vcpu context and it is much more
> > > > > > >>>> straightforward.        
> > > > > > >>>
> > > > > > >>> Perhaps I didn't understand your suggestion, but the same mm_struct can
> > > > > > >>> have more than 1 struct kvm so I'm not sure that it can work.        
> > > > > > >>
> > > > > > >> vcpu->pid is valid during vcpu running so that it can be used to figure
> > > > > > >> out which kvm instance owns the vcpu whose pid is the one as current
> > > > > > >> thread, i think it can work. :)        
> > > > > > > 
> > > > > > > No, don't do that.  There's no reason for a thread to run a single VCPU,
> > > > > > > and if you can have multiple VCPUs you can also have multiple VCPUs from
> > > > > > > multiple VMs.
> > > > > > > 
> > > > > > > Passing file descriptors around are the right way to connect subsystems.        
> > > > > > 
> > > > > > [CC Alex, Kevin and Qemu-devel]
> > > > > > 
> > > > > > Hi Paolo & Alex,
> > > > > > 
> > > > > > IIUC, passing file descriptors means touching QEMU and the UAPI between
> > > > > > QEMU and VFIO. Would you guys have a look at below draft patch? If it's
> > > > > > on the correct direction, I'll send the split ones. Thanks!
> > > > > > 
> > > > > > --
> > > > > > Thanks,
> > > > > > Jike
> > > > > > 
> > > > > > 
> > > > > > diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
> > > > > > index bec694c..f715d37 100644
> > > > > > --- a/hw/vfio/pci-quirks.c
> > > > > > +++ b/hw/vfio/pci-quirks.c
> > > > > > @@ -10,12 +10,14 @@
> > > > > >   * the COPYING file in the top-level directory.
> > > > > >   */
> > > > > >  
> > > > > > +#include <sys/ioctl.h>
> > > > > >  #include "qemu/osdep.h"
> > > > > >  #include "qemu/error-report.h"
> > > > > >  #include "qemu/range.h"
> > > > > >  #include "qapi/error.h"
> > > > > >  #include "hw/nvram/fw_cfg.h"
> > > > > >  #include "pci.h"
> > > > > > +#include "sysemu/kvm.h"
> > > > > >  #include "trace.h"
> > > > > >  
> > > > > >  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
> > > > > > @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
> > > > > >          break;
> > > > > >      }
> > > > > >  }
> > > > > > +
> > > > > > +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
> > > > > > +{
> > > > > > +    int vmfd;
> > > > > > +
> > > > > > +    if (!kvm_enabled() || !vdev->kvmgt)
> > > > > > +        return;
> > > > > > +
> > > > > > +    /* Tell the device what KVM it attached */
> > > > > > +    vmfd = kvm_get_vmfd(kvm_state);
> > > > > > +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
> > > > > > +}
> > > > > > diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> > > > > > index a5a620a..8732552 100644
> > > > > > --- a/hw/vfio/pci.c
> > > > > > +++ b/hw/vfio/pci.c
> > > > > > @@ -2561,6 +2561,8 @@ static int vfio_initfn(PCIDevice *pdev)
> > > > > >          return ret;
> > > > > >      }
> > > > > >  
> > > > > > +    vfio_quirk_kvmgt(vdev);
> > > > > > +
> > > > > >      /* Get a copy of config space */
> > > > > >      ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
> > > > > >                  MIN(pci_config_size(&vdev->pdev), vdev->config_size),
> > > > > > @@ -2832,6 +2834,7 @@ static Property vfio_pci_dev_properties[] = {
> > > > > >      DEFINE_PROP_UINT32("x-pci-sub-device-id", VFIOPCIDevice,
> > > > > >                         sub_device_id, PCI_ANY_ID),
> > > > > >      DEFINE_PROP_UINT32("x-igd-gms", VFIOPCIDevice, igd_gms, 0),
> > > > > > +    DEFINE_PROP_BOOL("kvmgt", VFIOPCIDevice, kvmgt, false),      
> > > > > 
> > > > > Just a side note, device options are a headache, users are prone to get
> > > > > them wrong and minimally it requires an entire round to get libvirt
> > > > > support.  We should be able to detect from the device or vfio API
> > > > > whether such a call is required.  Obviously if we can use the existing
> > > > > kvm-vfio device, that's the better option anyway.  Thanks,    
> > > > 
> > > > Also, vfio devices currently have no hard dependencies on KVM, if kvmgt
> > > > does, it needs to produce a device failure when unavailable.  Thanks,    
> > > 
> > > Also, I would like to see this as an generic feature instead of
> > > kvmgt specific interface, so we don't have to add new options to QEMU and it is
> > > up to the vendor driver to proceed with or without it.  
> > 
> > In general this should be decided by lack of some required feature
> > exclusively provided by KVM.  I would not want to add a generic opt-out
> > for mdev vendor drivers to decide that they arbitrarily want to disable
> > that path.  Thanks,  
> 
> IIUC, you are suggesting that this path should be controlled by KVM feature cap
> and it will be accessible to VFIO users when such checking is satisfied.

Maybe we're getting too loose with our pronouns here, I'm starting to
lose track of what "this" is referring to.  I agree that there's no
reason for the ioctl, as proposed to be kvmgt specific.  I would hope
that going through the kvm-vfio device to create that linkage would
eliminate that, but we'll need to see what Jike can come up with to
plumb between KVM and vfio.  Vendor drivers can implement their own
ioctls, now that we pass them through the mdev layer, but someone needs
to call those ioctls.  Ideally we want something programmatic to
trigger that, without requiring a user to pass an extra device
parameter.  Additionally, if there is any hope of making use of the
device with userspace drivers other than QEMU, hard dependencies on KVM
should be avoided.  Thanks,

Alex

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Jike Song]

On 10/18/2016 12:02 AM, Alex Williamson wrote:
> On Fri, 14 Oct 2016 15:19:01 -0700
> Neo Jia <cjia@nvidia.com> wrote:
> 
>> On Fri, Oct 14, 2016 at 10:51:24AM -0600, Alex Williamson wrote:
>>> On Fri, 14 Oct 2016 09:35:45 -0700
>>> Neo Jia <cjia@nvidia.com> wrote:
>>>   
>>>> On Fri, Oct 14, 2016 at 08:46:01AM -0600, Alex Williamson wrote:  
>>>>> On Fri, 14 Oct 2016 08:41:58 -0600
>>>>> Alex Williamson <alex.williamson@redhat.com> wrote:
>>>>>     
>>>>>> On Fri, 14 Oct 2016 18:37:45 +0800
>>>>>> Jike Song <jike.song@intel.com> wrote:
>>>>>>     
>>>>>>> On 10/11/2016 05:47 PM, Paolo Bonzini wrote:      
>>>>>>>>
>>>>>>>>
>>>>>>>> On 11/10/2016 11:21, Xiao Guangrong wrote:        
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 10/11/2016 04:54 PM, Paolo Bonzini wrote:        
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 11/10/2016 04:39, Xiao Guangrong wrote:        
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 10/11/2016 02:32 AM, Paolo Bonzini wrote:        
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On 10/10/2016 20:01, Neo Jia wrote:        
>>>>>>>>>>>>>> Hi Neo,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> AFAIK this is needed because KVMGT doesn't paravirtualize the PPGTT,
>>>>>>>>>>>>>> while nVidia does.        
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Paolo and Xiaoguang,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I am just wondering how device driver can register a notifier so he
>>>>>>>>>>>>> can be
>>>>>>>>>>>>> notified for write-protected pages when writes are happening.        
>>>>>>>>>>>>
>>>>>>>>>>>> It can't yet, but the API is ready for that.  kvm_vfio_set_group is
>>>>>>>>>>>> currently where a struct kvm_device* and struct vfio_group* touch.
>>>>>>>>>>>> Given
>>>>>>>>>>>> a struct kvm_device*, dev->kvm provides the struct kvm to be passed to
>>>>>>>>>>>> kvm_page_track_register_notifier.  So I guess you could add a callback
>>>>>>>>>>>> that passes the struct kvm_device* to the mdev device.
>>>>>>>>>>>>
>>>>>>>>>>>> Xiaoguang and Guangrong, what were your plans?  We discussed it briefly
>>>>>>>>>>>> at KVM Forum but I don't remember the details.        
>>>>>>>>>>>
>>>>>>>>>>> Your suggestion was that pass kvm fd to KVMGT via VFIO, so that we can
>>>>>>>>>>> figure out the kvm instance based on the fd.
>>>>>>>>>>>
>>>>>>>>>>> We got a new idea, how about search the kvm instance by mm_struct, it
>>>>>>>>>>> can work as KVMGT is running in the vcpu context and it is much more
>>>>>>>>>>> straightforward.        
>>>>>>>>>>
>>>>>>>>>> Perhaps I didn't understand your suggestion, but the same mm_struct can
>>>>>>>>>> have more than 1 struct kvm so I'm not sure that it can work.        
>>>>>>>>>
>>>>>>>>> vcpu->pid is valid during vcpu running so that it can be used to figure
>>>>>>>>> out which kvm instance owns the vcpu whose pid is the one as current
>>>>>>>>> thread, i think it can work. :)        
>>>>>>>>
>>>>>>>> No, don't do that.  There's no reason for a thread to run a single VCPU,
>>>>>>>> and if you can have multiple VCPUs you can also have multiple VCPUs from
>>>>>>>> multiple VMs.
>>>>>>>>
>>>>>>>> Passing file descriptors around are the right way to connect subsystems.        
>>>>>>>
>>>>>>> [CC Alex, Kevin and Qemu-devel]
>>>>>>>
>>>>>>> Hi Paolo & Alex,
>>>>>>>
>>>>>>> IIUC, passing file descriptors means touching QEMU and the UAPI between
>>>>>>> QEMU and VFIO. Would you guys have a look at below draft patch? If it's
>>>>>>> on the correct direction, I'll send the split ones. Thanks!
>>>>>>>
>>>>>>> --
>>>>>>> Thanks,
>>>>>>> Jike
>>>>>>>
>>>>>>>
>>>>>>> diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
>>>>>>> index bec694c..f715d37 100644
>>>>>>> --- a/hw/vfio/pci-quirks.c
>>>>>>> +++ b/hw/vfio/pci-quirks.c
>>>>>>> @@ -10,12 +10,14 @@
>>>>>>>   * the COPYING file in the top-level directory.
>>>>>>>   */
>>>>>>>  
>>>>>>> +#include <sys/ioctl.h>
>>>>>>>  #include "qemu/osdep.h"
>>>>>>>  #include "qemu/error-report.h"
>>>>>>>  #include "qemu/range.h"
>>>>>>>  #include "qapi/error.h"
>>>>>>>  #include "hw/nvram/fw_cfg.h"
>>>>>>>  #include "pci.h"
>>>>>>> +#include "sysemu/kvm.h"
>>>>>>>  #include "trace.h"
>>>>>>>  
>>>>>>>  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
>>>>>>> @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
>>>>>>>          break;
>>>>>>>      }
>>>>>>>  }
>>>>>>> +
>>>>>>> +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
>>>>>>> +{
>>>>>>> +    int vmfd;
>>>>>>> +
>>>>>>> +    if (!kvm_enabled() || !vdev->kvmgt)
>>>>>>> +        return;
>>>>>>> +
>>>>>>> +    /* Tell the device what KVM it attached */
>>>>>>> +    vmfd = kvm_get_vmfd(kvm_state);
>>>>>>> +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
>>>>>>> +}
>>>>>>> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
>>>>>>> index a5a620a..8732552 100644
>>>>>>> --- a/hw/vfio/pci.c
>>>>>>> +++ b/hw/vfio/pci.c
>>>>>>> @@ -2561,6 +2561,8 @@ static int vfio_initfn(PCIDevice *pdev)
>>>>>>>          return ret;
>>>>>>>      }
>>>>>>>  
>>>>>>> +    vfio_quirk_kvmgt(vdev);
>>>>>>> +
>>>>>>>      /* Get a copy of config space */
>>>>>>>      ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
>>>>>>>                  MIN(pci_config_size(&vdev->pdev), vdev->config_size),
>>>>>>> @@ -2832,6 +2834,7 @@ static Property vfio_pci_dev_properties[] = {
>>>>>>>      DEFINE_PROP_UINT32("x-pci-sub-device-id", VFIOPCIDevice,
>>>>>>>                         sub_device_id, PCI_ANY_ID),
>>>>>>>      DEFINE_PROP_UINT32("x-igd-gms", VFIOPCIDevice, igd_gms, 0),
>>>>>>> +    DEFINE_PROP_BOOL("kvmgt", VFIOPCIDevice, kvmgt, false),      
>>>>>>
>>>>>> Just a side note, device options are a headache, users are prone to get
>>>>>> them wrong and minimally it requires an entire round to get libvirt
>>>>>> support.  We should be able to detect from the device or vfio API
>>>>>> whether such a call is required.  Obviously if we can use the existing
>>>>>> kvm-vfio device, that's the better option anyway.  Thanks,    
>>>>>
>>>>> Also, vfio devices currently have no hard dependencies on KVM, if kvmgt
>>>>> does, it needs to produce a device failure when unavailable.  Thanks,    
>>>>
>>>> Also, I would like to see this as an generic feature instead of
>>>> kvmgt specific interface, so we don't have to add new options to QEMU and it is
>>>> up to the vendor driver to proceed with or without it.  
>>>
>>> In general this should be decided by lack of some required feature
>>> exclusively provided by KVM.  I would not want to add a generic opt-out
>>> for mdev vendor drivers to decide that they arbitrarily want to disable
>>> that path.  Thanks,  
>>
>> IIUC, you are suggesting that this path should be controlled by KVM feature cap
>> and it will be accessible to VFIO users when such checking is satisfied.
> 
> Maybe we're getting too loose with our pronouns here, I'm starting to
> lose track of what "this" is referring to.  I agree that there's no
> reason for the ioctl, as proposed to be kvmgt specific.  I would hope
> that going through the kvm-vfio device to create that linkage would
> eliminate that, but we'll need to see what Jike can come up with to
> plumb between KVM and vfio.  Vendor drivers can implement their own
> ioctls, now that we pass them through the mdev layer, but someone needs
> to call those ioctls.  Ideally we want something programmatic to
> trigger that, without requiring a user to pass an extra device
> parameter.  Additionally, if there is any hope of making use of the
> device with userspace drivers other than QEMU, hard dependencies on KVM
> should be avoided.  Thanks,
> 
> Alex
> 

Thanks for the advice, so I cooked another patch for your comments.
Basically a 'void *usrdata' is added to vfio_group, external users
can set it (kvm) or get it (kvm or other users like kvmgt).

BTW, in device-model, the open method will return failure to vfio-mdev
in case that such kvm information is not available.

--
Thanks,
Jike



diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
index d1d70e0..6b8d1d2 100644
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -86,6 +86,7 @@ struct vfio_group {
 	struct mutex			unbound_lock;
 	atomic_t			opened;
 	bool				noiommu;
+	void				*usrdata;
 };
 
 struct vfio_device {
@@ -447,14 +448,13 @@ static struct vfio_group *vfio_group_try_get(struct vfio_group *group)
 }
 
 static
-struct vfio_group *vfio_group_get_from_iommu(struct iommu_group *iommu_group)
+struct vfio_group *__vfio_group_get_from_iommu(struct iommu_group *iommu_group)
 {
 	struct vfio_group *group;
 
 	mutex_lock(&vfio.group_lock);
 	list_for_each_entry(group, &vfio.group_list, vfio_next) {
 		if (group->iommu_group == iommu_group) {
-			vfio_group_get(group);
 			mutex_unlock(&vfio.group_lock);
 			return group;
 		}
@@ -464,6 +464,17 @@ struct vfio_group *vfio_group_get_from_iommu(struct iommu_group *iommu_group)
 	return NULL;
 }
 
+static
+struct vfio_group *vfio_group_get_from_iommu(struct iommu_group *iommu_group)
+{
+	struct vfio_group *group = __vfio_group_get_from_iommu(iommu_group);
+	if (!group)
+		return NULL;
+
+	vfio_group_get(group);
+	return group;
+}
+
 static struct vfio_group *vfio_group_get_from_minor(int minor)
 {
 	struct vfio_group *group;
@@ -1728,6 +1739,31 @@ long vfio_external_check_extension(struct vfio_group *group, unsigned long arg)
 }
 EXPORT_SYMBOL_GPL(vfio_external_check_extension);
 
+void vfio_group_set_usrdata(struct vfio_group *group, void *data)
+{
+	group->usrdata = data;
+}
+EXPORT_SYMBOL_GPL(vfio_group_set_usrdata);
+
+void *vfio_group_get_usrdata(struct vfio_group *group)
+{
+	return group->usrdata;
+}
+EXPORT_SYMBOL_GPL(vfio_group_get_usrdata);
+
+void *vfio_group_get_usrdata_by_device(struct device *dev)
+{
+	struct vfio_group *vfio_group;
+
+	vfio_group = __vfio_group_get_from_iommu(dev->iommu_group);
+	if (!vfio_group)
+		return NULL;
+
+	return vfio_group_get_usrdata(vfio_group);
+}
+EXPORT_SYMBOL_GPL(vfio_group_get_usrdata_by_device);
+
+
 /**
  * Sub-module support
  */
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index 0ecae0b..712588f 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -91,6 +91,10 @@ extern void vfio_unregister_iommu_driver(
 extern int vfio_external_user_iommu_id(struct vfio_group *group);
 extern long vfio_external_check_extension(struct vfio_group *group,
 					  unsigned long arg);
+extern void vfio_group_set_usrdata(struct vfio_group *group, void *data);
+extern void *vfio_group_get_usrdata(struct vfio_group *group);
+extern void *vfio_group_get_usrdata_by_device(struct device *dev);
+
 
 /*
  * Sub-module helpers
diff --git a/virt/kvm/vfio.c b/virt/kvm/vfio.c
index 1dd087d..e00d401 100644
--- a/virt/kvm/vfio.c
+++ b/virt/kvm/vfio.c
@@ -60,6 +60,20 @@ static void kvm_vfio_group_put_external_user(struct vfio_group *vfio_group)
 	symbol_put(vfio_group_put_external_user);
 }
 
+static void kvm_vfio_group_set_kvm(struct vfio_group *group, void *kvm)
+{
+	void (*fn)(struct vfio_group *, void *);
+
+	fn = symbol_get(vfio_group_set_usrdata);
+	if (!fn)
+		return;
+
+	fn(group, kvm);
+	kvm_get_kvm(kvm);
+
+	symbol_put(vfio_group_set_usrdata);
+}
+
 static bool kvm_vfio_group_is_coherent(struct vfio_group *vfio_group)
 {
 	long (*fn)(struct vfio_group *, unsigned long);
@@ -161,6 +175,8 @@ static int kvm_vfio_set_group(struct kvm_device *dev, long attr, u64 arg)
 
 		kvm_vfio_update_coherency(dev);
 
+		kvm_vfio_group_set_kvm(vfio_group, dev->kvm);
+
 		return 0;
 
 	case KVM_DEV_VFIO_GROUP_DEL:
@@ -200,6 +216,8 @@ static int kvm_vfio_set_group(struct kvm_device *dev, long attr, u64 arg)
 
 		kvm_vfio_update_coherency(dev);
 
+		kvm_put_kvm(dev->kvm);
+
 		return ret;
 	}
 

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Alex Williamson]

On Tue, 18 Oct 2016 20:38:21 +0800
Jike Song <jike.song@intel.com> wrote:

> On 10/18/2016 12:02 AM, Alex Williamson wrote:
> > On Fri, 14 Oct 2016 15:19:01 -0700
> > Neo Jia <cjia@nvidia.com> wrote:
> >   
> >> On Fri, Oct 14, 2016 at 10:51:24AM -0600, Alex Williamson wrote:  
> >>> On Fri, 14 Oct 2016 09:35:45 -0700
> >>> Neo Jia <cjia@nvidia.com> wrote:
> >>>     
> >>>> On Fri, Oct 14, 2016 at 08:46:01AM -0600, Alex Williamson wrote:    
> >>>>> On Fri, 14 Oct 2016 08:41:58 -0600
> >>>>> Alex Williamson <alex.williamson@redhat.com> wrote:
> >>>>>       
> >>>>>> On Fri, 14 Oct 2016 18:37:45 +0800
> >>>>>> Jike Song <jike.song@intel.com> wrote:
> >>>>>>       
> >>>>>>> On 10/11/2016 05:47 PM, Paolo Bonzini wrote:        
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On 11/10/2016 11:21, Xiao Guangrong wrote:          
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> On 10/11/2016 04:54 PM, Paolo Bonzini wrote:          
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> On 11/10/2016 04:39, Xiao Guangrong wrote:          
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On 10/11/2016 02:32 AM, Paolo Bonzini wrote:          
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> On 10/10/2016 20:01, Neo Jia wrote:          
> >>>>>>>>>>>>>> Hi Neo,
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> AFAIK this is needed because KVMGT doesn't paravirtualize the PPGTT,
> >>>>>>>>>>>>>> while nVidia does.          
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Hi Paolo and Xiaoguang,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> I am just wondering how device driver can register a notifier so he
> >>>>>>>>>>>>> can be
> >>>>>>>>>>>>> notified for write-protected pages when writes are happening.          
> >>>>>>>>>>>>
> >>>>>>>>>>>> It can't yet, but the API is ready for that.  kvm_vfio_set_group is
> >>>>>>>>>>>> currently where a struct kvm_device* and struct vfio_group* touch.
> >>>>>>>>>>>> Given
> >>>>>>>>>>>> a struct kvm_device*, dev->kvm provides the struct kvm to be passed to
> >>>>>>>>>>>> kvm_page_track_register_notifier.  So I guess you could add a callback
> >>>>>>>>>>>> that passes the struct kvm_device* to the mdev device.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Xiaoguang and Guangrong, what were your plans?  We discussed it briefly
> >>>>>>>>>>>> at KVM Forum but I don't remember the details.          
> >>>>>>>>>>>
> >>>>>>>>>>> Your suggestion was that pass kvm fd to KVMGT via VFIO, so that we can
> >>>>>>>>>>> figure out the kvm instance based on the fd.
> >>>>>>>>>>>
> >>>>>>>>>>> We got a new idea, how about search the kvm instance by mm_struct, it
> >>>>>>>>>>> can work as KVMGT is running in the vcpu context and it is much more
> >>>>>>>>>>> straightforward.          
> >>>>>>>>>>
> >>>>>>>>>> Perhaps I didn't understand your suggestion, but the same mm_struct can
> >>>>>>>>>> have more than 1 struct kvm so I'm not sure that it can work.          
> >>>>>>>>>
> >>>>>>>>> vcpu->pid is valid during vcpu running so that it can be used to figure
> >>>>>>>>> out which kvm instance owns the vcpu whose pid is the one as current
> >>>>>>>>> thread, i think it can work. :)          
> >>>>>>>>
> >>>>>>>> No, don't do that.  There's no reason for a thread to run a single VCPU,
> >>>>>>>> and if you can have multiple VCPUs you can also have multiple VCPUs from
> >>>>>>>> multiple VMs.
> >>>>>>>>
> >>>>>>>> Passing file descriptors around are the right way to connect subsystems.          
> >>>>>>>
> >>>>>>> [CC Alex, Kevin and Qemu-devel]
> >>>>>>>
> >>>>>>> Hi Paolo & Alex,
> >>>>>>>
> >>>>>>> IIUC, passing file descriptors means touching QEMU and the UAPI between
> >>>>>>> QEMU and VFIO. Would you guys have a look at below draft patch? If it's
> >>>>>>> on the correct direction, I'll send the split ones. Thanks!
> >>>>>>>
> >>>>>>> --
> >>>>>>> Thanks,
> >>>>>>> Jike
> >>>>>>>
> >>>>>>>
> >>>>>>> diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
> >>>>>>> index bec694c..f715d37 100644
> >>>>>>> --- a/hw/vfio/pci-quirks.c
> >>>>>>> +++ b/hw/vfio/pci-quirks.c
> >>>>>>> @@ -10,12 +10,14 @@
> >>>>>>>   * the COPYING file in the top-level directory.
> >>>>>>>   */
> >>>>>>>  
> >>>>>>> +#include <sys/ioctl.h>
> >>>>>>>  #include "qemu/osdep.h"
> >>>>>>>  #include "qemu/error-report.h"
> >>>>>>>  #include "qemu/range.h"
> >>>>>>>  #include "qapi/error.h"
> >>>>>>>  #include "hw/nvram/fw_cfg.h"
> >>>>>>>  #include "pci.h"
> >>>>>>> +#include "sysemu/kvm.h"
> >>>>>>>  #include "trace.h"
> >>>>>>>  
> >>>>>>>  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
> >>>>>>> @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
> >>>>>>>          break;
> >>>>>>>      }
> >>>>>>>  }
> >>>>>>> +
> >>>>>>> +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
> >>>>>>> +{
> >>>>>>> +    int vmfd;
> >>>>>>> +
> >>>>>>> +    if (!kvm_enabled() || !vdev->kvmgt)
> >>>>>>> +        return;
> >>>>>>> +
> >>>>>>> +    /* Tell the device what KVM it attached */
> >>>>>>> +    vmfd = kvm_get_vmfd(kvm_state);
> >>>>>>> +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
> >>>>>>> +}
> >>>>>>> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> >>>>>>> index a5a620a..8732552 100644
> >>>>>>> --- a/hw/vfio/pci.c
> >>>>>>> +++ b/hw/vfio/pci.c
> >>>>>>> @@ -2561,6 +2561,8 @@ static int vfio_initfn(PCIDevice *pdev)
> >>>>>>>          return ret;
> >>>>>>>      }
> >>>>>>>  
> >>>>>>> +    vfio_quirk_kvmgt(vdev);
> >>>>>>> +
> >>>>>>>      /* Get a copy of config space */
> >>>>>>>      ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
> >>>>>>>                  MIN(pci_config_size(&vdev->pdev), vdev->config_size),
> >>>>>>> @@ -2832,6 +2834,7 @@ static Property vfio_pci_dev_properties[] = {
> >>>>>>>      DEFINE_PROP_UINT32("x-pci-sub-device-id", VFIOPCIDevice,
> >>>>>>>                         sub_device_id, PCI_ANY_ID),
> >>>>>>>      DEFINE_PROP_UINT32("x-igd-gms", VFIOPCIDevice, igd_gms, 0),
> >>>>>>> +    DEFINE_PROP_BOOL("kvmgt", VFIOPCIDevice, kvmgt, false),        
> >>>>>>
> >>>>>> Just a side note, device options are a headache, users are prone to get
> >>>>>> them wrong and minimally it requires an entire round to get libvirt
> >>>>>> support.  We should be able to detect from the device or vfio API
> >>>>>> whether such a call is required.  Obviously if we can use the existing
> >>>>>> kvm-vfio device, that's the better option anyway.  Thanks,      
> >>>>>
> >>>>> Also, vfio devices currently have no hard dependencies on KVM, if kvmgt
> >>>>> does, it needs to produce a device failure when unavailable.  Thanks,      
> >>>>
> >>>> Also, I would like to see this as an generic feature instead of
> >>>> kvmgt specific interface, so we don't have to add new options to QEMU and it is
> >>>> up to the vendor driver to proceed with or without it.    
> >>>
> >>> In general this should be decided by lack of some required feature
> >>> exclusively provided by KVM.  I would not want to add a generic opt-out
> >>> for mdev vendor drivers to decide that they arbitrarily want to disable
> >>> that path.  Thanks,    
> >>
> >> IIUC, you are suggesting that this path should be controlled by KVM feature cap
> >> and it will be accessible to VFIO users when such checking is satisfied.  
> > 
> > Maybe we're getting too loose with our pronouns here, I'm starting to
> > lose track of what "this" is referring to.  I agree that there's no
> > reason for the ioctl, as proposed to be kvmgt specific.  I would hope
> > that going through the kvm-vfio device to create that linkage would
> > eliminate that, but we'll need to see what Jike can come up with to
> > plumb between KVM and vfio.  Vendor drivers can implement their own
> > ioctls, now that we pass them through the mdev layer, but someone needs
> > to call those ioctls.  Ideally we want something programmatic to
> > trigger that, without requiring a user to pass an extra device
> > parameter.  Additionally, if there is any hope of making use of the
> > device with userspace drivers other than QEMU, hard dependencies on KVM
> > should be avoided.  Thanks,
> > 
> > Alex
> >   
> 
> Thanks for the advice, so I cooked another patch for your comments.
> Basically a 'void *usrdata' is added to vfio_group, external users
> can set it (kvm) or get it (kvm or other users like kvmgt).
> 
> BTW, in device-model, the open method will return failure to vfio-mdev
> in case that such kvm information is not available.
> 
> --
> Thanks,
> Jike
> 
> 
> 
> diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
> index d1d70e0..6b8d1d2 100644
> --- a/drivers/vfio/vfio.c
> +++ b/drivers/vfio/vfio.c
> @@ -86,6 +86,7 @@ struct vfio_group {
>  	struct mutex			unbound_lock;
>  	atomic_t			opened;
>  	bool				noiommu;
> +	void				*usrdata;
>  };
>  
>  struct vfio_device {
> @@ -447,14 +448,13 @@ static struct vfio_group *vfio_group_try_get(struct vfio_group *group)
>  }
>  
>  static
> -struct vfio_group *vfio_group_get_from_iommu(struct iommu_group *iommu_group)
> +struct vfio_group *__vfio_group_get_from_iommu(struct iommu_group *iommu_group)
>  {
>  	struct vfio_group *group;
>  
>  	mutex_lock(&vfio.group_lock);
>  	list_for_each_entry(group, &vfio.group_list, vfio_next) {
>  		if (group->iommu_group == iommu_group) {
> -			vfio_group_get(group);

This is wrong, we can't add our reference after we release the lock.

>  			mutex_unlock(&vfio.group_lock);
>  			return group;
>  		}
> @@ -464,6 +464,17 @@ struct vfio_group *vfio_group_get_from_iommu(struct iommu_group *iommu_group)
>  	return NULL;
>  }
>  
> +static
> +struct vfio_group *vfio_group_get_from_iommu(struct iommu_group *iommu_group)
> +{
> +	struct vfio_group *group = __vfio_group_get_from_iommu(iommu_group);
> +	if (!group)
> +		return NULL;
> +
> +	vfio_group_get(group);

We have no basis to get a reference here.  This function cannot exist
separate from the existing function above.

> +	return group;
> +}
> +
>  static struct vfio_group *vfio_group_get_from_minor(int minor)
>  {
>  	struct vfio_group *group;
> @@ -1728,6 +1739,31 @@ long vfio_external_check_extension(struct vfio_group *group, unsigned long arg)
>  }
>  EXPORT_SYMBOL_GPL(vfio_external_check_extension);
>  
> +void vfio_group_set_usrdata(struct vfio_group *group, void *data)
> +{
> +	group->usrdata = data;
> +}
> +EXPORT_SYMBOL_GPL(vfio_group_set_usrdata);
> +
> +void *vfio_group_get_usrdata(struct vfio_group *group)
> +{
> +	return group->usrdata;
> +}
> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata);
> +
> +void *vfio_group_get_usrdata_by_device(struct device *dev)
> +{
> +	struct vfio_group *vfio_group;
> +
> +	vfio_group = __vfio_group_get_from_iommu(dev->iommu_group);

We actually need to use iommu_group_get() here.  Kirti adds a
vfio_group_get_from_dev() in v9 03/12 that does this properly.

> +	if (!vfio_group)
> +		return NULL;
> +
> +	return vfio_group_get_usrdata(vfio_group);

This operates on a group for which we have no reference.

> +}
> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata_by_device);
> +
> +
>  /**
>   * Sub-module support
>   */
> diff --git a/include/linux/vfio.h b/include/linux/vfio.h
> index 0ecae0b..712588f 100644
> --- a/include/linux/vfio.h
> +++ b/include/linux/vfio.h
> @@ -91,6 +91,10 @@ extern void vfio_unregister_iommu_driver(
>  extern int vfio_external_user_iommu_id(struct vfio_group *group);
>  extern long vfio_external_check_extension(struct vfio_group *group,
>  					  unsigned long arg);
> +extern void vfio_group_set_usrdata(struct vfio_group *group, void *data);
> +extern void *vfio_group_get_usrdata(struct vfio_group *group);
> +extern void *vfio_group_get_usrdata_by_device(struct device *dev);
> +
>  
>  /*
>   * Sub-module helpers
> diff --git a/virt/kvm/vfio.c b/virt/kvm/vfio.c
> index 1dd087d..e00d401 100644
> --- a/virt/kvm/vfio.c
> +++ b/virt/kvm/vfio.c
> @@ -60,6 +60,20 @@ static void kvm_vfio_group_put_external_user(struct vfio_group *vfio_group)
>  	symbol_put(vfio_group_put_external_user);
>  }
>  
> +static void kvm_vfio_group_set_kvm(struct vfio_group *group, void *kvm)
> +{
> +	void (*fn)(struct vfio_group *, void *);
> +
> +	fn = symbol_get(vfio_group_set_usrdata);
> +	if (!fn)
> +		return;
> +
> +	fn(group, kvm);
> +	kvm_get_kvm(kvm);
> +
> +	symbol_put(vfio_group_set_usrdata);
> +}
> +
>  static bool kvm_vfio_group_is_coherent(struct vfio_group *vfio_group)
>  {
>  	long (*fn)(struct vfio_group *, unsigned long);
> @@ -161,6 +175,8 @@ static int kvm_vfio_set_group(struct kvm_device *dev, long attr, u64 arg)
>  
>  		kvm_vfio_update_coherency(dev);
>  
> +		kvm_vfio_group_set_kvm(vfio_group, dev->kvm);
> +
>  		return 0;
>  
>  	case KVM_DEV_VFIO_GROUP_DEL:
> @@ -200,6 +216,8 @@ static int kvm_vfio_set_group(struct kvm_device *dev, long attr, u64 arg)
>  
>  		kvm_vfio_update_coherency(dev);
>  
> +		kvm_put_kvm(dev->kvm);
> +
>  		return ret;
>  	}

How does anyone get'ing the usrdata know what it contains?  Does the
vendor driver compare it to a pointer it found elsewhere?  How does the
vendor driver generate an error back to the user if this linkage is
necessary but unavailable?  Thanks,

Alex

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Jike Song]

On 10/18/2016 10:59 PM, Alex Williamson wrote:
> On Tue, 18 Oct 2016 20:38:21 +0800
> Jike Song <jike.song@intel.com> wrote:
>> On 10/18/2016 12:02 AM, Alex Williamson wrote:
>>> On Fri, 14 Oct 2016 15:19:01 -0700
>>> Neo Jia <cjia@nvidia.com> wrote:
>>>   
>>>> On Fri, Oct 14, 2016 at 10:51:24AM -0600, Alex Williamson wrote:  
>>>>> On Fri, 14 Oct 2016 09:35:45 -0700
>>>>> Neo Jia <cjia@nvidia.com> wrote:
>>>>>     
>>>>>> On Fri, Oct 14, 2016 at 08:46:01AM -0600, Alex Williamson wrote:    
>>>>>>> On Fri, 14 Oct 2016 08:41:58 -0600
>>>>>>> Alex Williamson <alex.williamson@redhat.com> wrote:
>>>>>>>       
>>>>>>>> On Fri, 14 Oct 2016 18:37:45 +0800
>>>>>>>> Jike Song <jike.song@intel.com> wrote:
>>>>>>>>       
>>>>>>>>> On 10/11/2016 05:47 PM, Paolo Bonzini wrote:        
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 11/10/2016 11:21, Xiao Guangrong wrote:          
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 10/11/2016 04:54 PM, Paolo Bonzini wrote:          
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On 11/10/2016 04:39, Xiao Guangrong wrote:          
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 10/11/2016 02:32 AM, Paolo Bonzini wrote:          
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 10/10/2016 20:01, Neo Jia wrote:          
>>>>>>>>>>>>>>>> Hi Neo,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> AFAIK this is needed because KVMGT doesn't paravirtualize the PPGTT,
>>>>>>>>>>>>>>>> while nVidia does.          
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Paolo and Xiaoguang,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I am just wondering how device driver can register a notifier so he
>>>>>>>>>>>>>>> can be
>>>>>>>>>>>>>>> notified for write-protected pages when writes are happening.          
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> It can't yet, but the API is ready for that.  kvm_vfio_set_group is
>>>>>>>>>>>>>> currently where a struct kvm_device* and struct vfio_group* touch.
>>>>>>>>>>>>>> Given
>>>>>>>>>>>>>> a struct kvm_device*, dev->kvm provides the struct kvm to be passed to
>>>>>>>>>>>>>> kvm_page_track_register_notifier.  So I guess you could add a callback
>>>>>>>>>>>>>> that passes the struct kvm_device* to the mdev device.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Xiaoguang and Guangrong, what were your plans?  We discussed it briefly
>>>>>>>>>>>>>> at KVM Forum but I don't remember the details.          
>>>>>>>>>>>>>
>>>>>>>>>>>>> Your suggestion was that pass kvm fd to KVMGT via VFIO, so that we can
>>>>>>>>>>>>> figure out the kvm instance based on the fd.
>>>>>>>>>>>>>
>>>>>>>>>>>>> We got a new idea, how about search the kvm instance by mm_struct, it
>>>>>>>>>>>>> can work as KVMGT is running in the vcpu context and it is much more
>>>>>>>>>>>>> straightforward.          
>>>>>>>>>>>>
>>>>>>>>>>>> Perhaps I didn't understand your suggestion, but the same mm_struct can
>>>>>>>>>>>> have more than 1 struct kvm so I'm not sure that it can work.          
>>>>>>>>>>>
>>>>>>>>>>> vcpu->pid is valid during vcpu running so that it can be used to figure
>>>>>>>>>>> out which kvm instance owns the vcpu whose pid is the one as current
>>>>>>>>>>> thread, i think it can work. :)          
>>>>>>>>>>
>>>>>>>>>> No, don't do that.  There's no reason for a thread to run a single VCPU,
>>>>>>>>>> and if you can have multiple VCPUs you can also have multiple VCPUs from
>>>>>>>>>> multiple VMs.
>>>>>>>>>>
>>>>>>>>>> Passing file descriptors around are the right way to connect subsystems.          
>>>>>>>>>
>>>>>>>>> [CC Alex, Kevin and Qemu-devel]
>>>>>>>>>
>>>>>>>>> Hi Paolo & Alex,
>>>>>>>>>
>>>>>>>>> IIUC, passing file descriptors means touching QEMU and the UAPI between
>>>>>>>>> QEMU and VFIO. Would you guys have a look at below draft patch? If it's
>>>>>>>>> on the correct direction, I'll send the split ones. Thanks!
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Thanks,
>>>>>>>>> Jike
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
>>>>>>>>> index bec694c..f715d37 100644
>>>>>>>>> --- a/hw/vfio/pci-quirks.c
>>>>>>>>> +++ b/hw/vfio/pci-quirks.c
>>>>>>>>> @@ -10,12 +10,14 @@
>>>>>>>>>   * the COPYING file in the top-level directory.
>>>>>>>>>   */
>>>>>>>>>  
>>>>>>>>> +#include <sys/ioctl.h>
>>>>>>>>>  #include "qemu/osdep.h"
>>>>>>>>>  #include "qemu/error-report.h"
>>>>>>>>>  #include "qemu/range.h"
>>>>>>>>>  #include "qapi/error.h"
>>>>>>>>>  #include "hw/nvram/fw_cfg.h"
>>>>>>>>>  #include "pci.h"
>>>>>>>>> +#include "sysemu/kvm.h"
>>>>>>>>>  #include "trace.h"
>>>>>>>>>  
>>>>>>>>>  /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
>>>>>>>>> @@ -1844,3 +1846,15 @@ void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
>>>>>>>>>          break;
>>>>>>>>>      }
>>>>>>>>>  }
>>>>>>>>> +
>>>>>>>>> +void vfio_quirk_kvmgt(VFIOPCIDevice *vdev)
>>>>>>>>> +{
>>>>>>>>> +    int vmfd;
>>>>>>>>> +
>>>>>>>>> +    if (!kvm_enabled() || !vdev->kvmgt)
>>>>>>>>> +        return;
>>>>>>>>> +
>>>>>>>>> +    /* Tell the device what KVM it attached */
>>>>>>>>> +    vmfd = kvm_get_vmfd(kvm_state);
>>>>>>>>> +    ioctl(vdev->vbasedev.fd, VFIO_SET_KVMFD, vmfd);
>>>>>>>>> +}
>>>>>>>>> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
>>>>>>>>> index a5a620a..8732552 100644
>>>>>>>>> --- a/hw/vfio/pci.c
>>>>>>>>> +++ b/hw/vfio/pci.c
>>>>>>>>> @@ -2561,6 +2561,8 @@ static int vfio_initfn(PCIDevice *pdev)
>>>>>>>>>          return ret;
>>>>>>>>>      }
>>>>>>>>>  
>>>>>>>>> +    vfio_quirk_kvmgt(vdev);
>>>>>>>>> +
>>>>>>>>>      /* Get a copy of config space */
>>>>>>>>>      ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
>>>>>>>>>                  MIN(pci_config_size(&vdev->pdev), vdev->config_size),
>>>>>>>>> @@ -2832,6 +2834,7 @@ static Property vfio_pci_dev_properties[] = {
>>>>>>>>>      DEFINE_PROP_UINT32("x-pci-sub-device-id", VFIOPCIDevice,
>>>>>>>>>                         sub_device_id, PCI_ANY_ID),
>>>>>>>>>      DEFINE_PROP_UINT32("x-igd-gms", VFIOPCIDevice, igd_gms, 0),
>>>>>>>>> +    DEFINE_PROP_BOOL("kvmgt", VFIOPCIDevice, kvmgt, false),        
>>>>>>>>
>>>>>>>> Just a side note, device options are a headache, users are prone to get
>>>>>>>> them wrong and minimally it requires an entire round to get libvirt
>>>>>>>> support.  We should be able to detect from the device or vfio API
>>>>>>>> whether such a call is required.  Obviously if we can use the existing
>>>>>>>> kvm-vfio device, that's the better option anyway.  Thanks,      
>>>>>>>
>>>>>>> Also, vfio devices currently have no hard dependencies on KVM, if kvmgt
>>>>>>> does, it needs to produce a device failure when unavailable.  Thanks,      
>>>>>>
>>>>>> Also, I would like to see this as an generic feature instead of
>>>>>> kvmgt specific interface, so we don't have to add new options to QEMU and it is
>>>>>> up to the vendor driver to proceed with or without it.    
>>>>>
>>>>> In general this should be decided by lack of some required feature
>>>>> exclusively provided by KVM.  I would not want to add a generic opt-out
>>>>> for mdev vendor drivers to decide that they arbitrarily want to disable
>>>>> that path.  Thanks,    
>>>>
>>>> IIUC, you are suggesting that this path should be controlled by KVM feature cap
>>>> and it will be accessible to VFIO users when such checking is satisfied.  
>>>
>>> Maybe we're getting too loose with our pronouns here, I'm starting to
>>> lose track of what "this" is referring to.  I agree that there's no
>>> reason for the ioctl, as proposed to be kvmgt specific.  I would hope
>>> that going through the kvm-vfio device to create that linkage would
>>> eliminate that, but we'll need to see what Jike can come up with to
>>> plumb between KVM and vfio.  Vendor drivers can implement their own
>>> ioctls, now that we pass them through the mdev layer, but someone needs
>>> to call those ioctls.  Ideally we want something programmatic to
>>> trigger that, without requiring a user to pass an extra device
>>> parameter.  Additionally, if there is any hope of making use of the
>>> device with userspace drivers other than QEMU, hard dependencies on KVM
>>> should be avoided.  Thanks,
>>>
>>> Alex
>>>   
>>
>> Thanks for the advice, so I cooked another patch for your comments.
>> Basically a 'void *usrdata' is added to vfio_group, external users
>> can set it (kvm) or get it (kvm or other users like kvmgt).
>>
>> BTW, in device-model, the open method will return failure to vfio-mdev
>> in case that such kvm information is not available.
>>
>> --
>> Thanks,
>> Jike
>>
>>
>>
>> diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
>> index d1d70e0..6b8d1d2 100644
>> --- a/drivers/vfio/vfio.c
>> +++ b/drivers/vfio/vfio.c
>> @@ -86,6 +86,7 @@ struct vfio_group {
>>  	struct mutex			unbound_lock;
>>  	atomic_t			opened;
>>  	bool				noiommu;
>> +	void				*usrdata;
>>  };
>>  
>>  struct vfio_device {
>> @@ -447,14 +448,13 @@ static struct vfio_group *vfio_group_try_get(struct vfio_group *group)
>>  }
>>  
>>  static
>> -struct vfio_group *vfio_group_get_from_iommu(struct iommu_group *iommu_group)
>> +struct vfio_group *__vfio_group_get_from_iommu(struct iommu_group *iommu_group)
>>  {
>>  	struct vfio_group *group;
>>  
>>  	mutex_lock(&vfio.group_lock);
>>  	list_for_each_entry(group, &vfio.group_list, vfio_next) {
>>  		if (group->iommu_group == iommu_group) {
>> -			vfio_group_get(group);
> 
> This is wrong, we can't add our reference after we release the lock.
> 

Thanks for pointing it out :)

>>  			mutex_unlock(&vfio.group_lock);
>>  			return group;
>>  		}
>> @@ -464,6 +464,17 @@ struct vfio_group *vfio_group_get_from_iommu(struct iommu_group *iommu_group)
>>  	return NULL;
>>  }
>>  
>> +static
>> +struct vfio_group *vfio_group_get_from_iommu(struct iommu_group *iommu_group)
>> +{
>> +	struct vfio_group *group = __vfio_group_get_from_iommu(iommu_group);
>> +	if (!group)
>> +		return NULL;
>> +
>> +	vfio_group_get(group);
> 
> We have no basis to get a reference here.  This function cannot exist
> separate from the existing function above.
> 
>> +	return group;
>> +}
>> +
>>  static struct vfio_group *vfio_group_get_from_minor(int minor)
>>  {
>>  	struct vfio_group *group;
>> @@ -1728,6 +1739,31 @@ long vfio_external_check_extension(struct vfio_group *group, unsigned long arg)
>>  }
>>  EXPORT_SYMBOL_GPL(vfio_external_check_extension);
>>  
>> +void vfio_group_set_usrdata(struct vfio_group *group, void *data)
>> +{
>> +	group->usrdata = data;
>> +}
>> +EXPORT_SYMBOL_GPL(vfio_group_set_usrdata);
>> +
>> +void *vfio_group_get_usrdata(struct vfio_group *group)
>> +{
>> +	return group->usrdata;
>> +}
>> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata);
>> +
>> +void *vfio_group_get_usrdata_by_device(struct device *dev)
>> +{
>> +	struct vfio_group *vfio_group;
>> +
>> +	vfio_group = __vfio_group_get_from_iommu(dev->iommu_group);
> 
> We actually need to use iommu_group_get() here.  Kirti adds a
> vfio_group_get_from_dev() in v9 03/12 that does this properly.
> 
>> +	if (!vfio_group)
>> +		return NULL;
>> +
>> +	return vfio_group_get_usrdata(vfio_group);
> 
> This operates on a group for which we have no reference.

Great to know Kirti's work! BTW, this means user need to
call vfio_group_put_external_user afterwards, right?

>> +}
>> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata_by_device);
>> +
>> +
>>  /**
>>   * Sub-module support
>>   */
>> diff --git a/include/linux/vfio.h b/include/linux/vfio.h
>> index 0ecae0b..712588f 100644
>> --- a/include/linux/vfio.h
>> +++ b/include/linux/vfio.h
>> @@ -91,6 +91,10 @@ extern void vfio_unregister_iommu_driver(
>>  extern int vfio_external_user_iommu_id(struct vfio_group *group);
>>  extern long vfio_external_check_extension(struct vfio_group *group,
>>  					  unsigned long arg);
>> +extern void vfio_group_set_usrdata(struct vfio_group *group, void *data);
>> +extern void *vfio_group_get_usrdata(struct vfio_group *group);
>> +extern void *vfio_group_get_usrdata_by_device(struct device *dev);
>> +
>>  
>>  /*
>>   * Sub-module helpers
>> diff --git a/virt/kvm/vfio.c b/virt/kvm/vfio.c
>> index 1dd087d..e00d401 100644
>> --- a/virt/kvm/vfio.c
>> +++ b/virt/kvm/vfio.c
>> @@ -60,6 +60,20 @@ static void kvm_vfio_group_put_external_user(struct vfio_group *vfio_group)
>>  	symbol_put(vfio_group_put_external_user);
>>  }
>>  
>> +static void kvm_vfio_group_set_kvm(struct vfio_group *group, void *kvm)
>> +{
>> +	void (*fn)(struct vfio_group *, void *);
>> +
>> +	fn = symbol_get(vfio_group_set_usrdata);
>> +	if (!fn)
>> +		return;
>> +
>> +	fn(group, kvm);
>> +	kvm_get_kvm(kvm);
>> +
>> +	symbol_put(vfio_group_set_usrdata);
>> +}
>> +
>>  static bool kvm_vfio_group_is_coherent(struct vfio_group *vfio_group)
>>  {
>>  	long (*fn)(struct vfio_group *, unsigned long);
>> @@ -161,6 +175,8 @@ static int kvm_vfio_set_group(struct kvm_device *dev, long attr, u64 arg)
>>  
>>  		kvm_vfio_update_coherency(dev);
>>  
>> +		kvm_vfio_group_set_kvm(vfio_group, dev->kvm);
>> +
>>  		return 0;
>>  
>>  	case KVM_DEV_VFIO_GROUP_DEL:
>> @@ -200,6 +216,8 @@ static int kvm_vfio_set_group(struct kvm_device *dev, long attr, u64 arg)
>>  
>>  		kvm_vfio_update_coherency(dev);
>>  
>> +		kvm_put_kvm(dev->kvm);
>> +
>>  		return ret;
>>  	}
> 
> How does anyone get'ing the usrdata know what it contains?

Currently only the KVM instance. Maybe we can add other data along with
flags in the future?

> Does the
> vendor driver compare it to a pointer it found elsewhere?  How does the
> vendor driver generate an error back to the user if this linkage is
> necessary but unavailable?

For the data == kvm scenario, yes, I think it's only valid to use it
inside the kvm thread context, IIUC, comparing kvm->mm with current->mm
does the trick.  If not equal, in our case, the parent_ops->open()
will get an -ESRCH indicating that this mdev must be used along with KVM.


--
Thanks,
Jike

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Xiao Guangrong]

On 10/19/2016 10:32 AM, Jike Song wrote:
+EXPORT_SYMBOL_GPL(vfio_group_set_usrdata);
>>> +
>>> +void *vfio_group_get_usrdata(struct vfio_group *group)
>>> +{
>>> +	return group->usrdata;
>>> +}
>>> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata);
>>> +
>>> +void *vfio_group_get_usrdata_by_device(struct device *dev)
>>> +{
>>> +	struct vfio_group *vfio_group;
>>> +
>>> +	vfio_group = __vfio_group_get_from_iommu(dev->iommu_group);
>>
>> We actually need to use iommu_group_get() here.  Kirti adds a
>> vfio_group_get_from_dev() in v9 03/12 that does this properly.
>>
>>> +	if (!vfio_group)
>>> +		return NULL;
>>> +
>>> +	return vfio_group_get_usrdata(vfio_group);

I am worrying if the kvm instance got from group->usrdata is safe
enough? What happens if you get the instance after kvm released
kvm-vfio device?

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Paolo Bonzini]

On 19/10/2016 07:45, Xiao Guangrong wrote:
> 
> 
> On 10/19/2016 10:32 AM, Jike Song wrote:
> +EXPORT_SYMBOL_GPL(vfio_group_set_usrdata);
>>>> +
>>>> +void *vfio_group_get_usrdata(struct vfio_group *group)
>>>> +{
>>>> +    return group->usrdata;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata);
>>>> +
>>>> +void *vfio_group_get_usrdata_by_device(struct device *dev)
>>>> +{
>>>> +    struct vfio_group *vfio_group;
>>>> +
>>>> +    vfio_group = __vfio_group_get_from_iommu(dev->iommu_group);
>>>
>>> We actually need to use iommu_group_get() here.  Kirti adds a
>>> vfio_group_get_from_dev() in v9 03/12 that does this properly.
>>>
>>>> +    if (!vfio_group)
>>>> +        return NULL;
>>>> +
>>>> +    return vfio_group_get_usrdata(vfio_group);
> 
> I am worrying if the kvm instance got from group->usrdata is safe
> enough? What happens if you get the instance after kvm released
> kvm-vfio device?

It shouldn't happen if you use kvm_get_kvm and kvm_put_kvm properly.  It
is almost okay in the patch, just:

> @@ -200,6 +216,8 @@ static int kvm_vfio_set_group(struct kvm_device *dev, long attr, u64 arg)
>  
>  		kvm_vfio_update_coherency(dev);
>  
> +		kvm_put_kvm(dev->kvm);
> +
>  		return ret;
>  	}

... please add a new function kvm_vfio_group_clear_kvm(vfio_group) here,
that does vfio_group_set_usrdata(vfio_group, NULL) and kvm_put_kvm.
This should avoid use-after-free.

Paolo

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Xiao Guangrong]

On 10/19/2016 07:56 PM, Paolo Bonzini wrote:
>
>
> On 19/10/2016 07:45, Xiao Guangrong wrote:
>>
>>
>> On 10/19/2016 10:32 AM, Jike Song wrote:
>> +EXPORT_SYMBOL_GPL(vfio_group_set_usrdata);
>>>>> +
>>>>> +void *vfio_group_get_usrdata(struct vfio_group *group)
>>>>> +{
>>>>> +    return group->usrdata;
>>>>> +}
>>>>> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata);
>>>>> +
>>>>> +void *vfio_group_get_usrdata_by_device(struct device *dev)
>>>>> +{
>>>>> +    struct vfio_group *vfio_group;
>>>>> +
>>>>> +    vfio_group = __vfio_group_get_from_iommu(dev->iommu_group);
>>>>
>>>> We actually need to use iommu_group_get() here.  Kirti adds a
>>>> vfio_group_get_from_dev() in v9 03/12 that does this properly.
>>>>
>>>>> +    if (!vfio_group)
>>>>> +        return NULL;
>>>>> +
>>>>> +    return vfio_group_get_usrdata(vfio_group);
>>
>> I am worrying if the kvm instance got from group->usrdata is safe
>> enough? What happens if you get the instance after kvm released
>> kvm-vfio device?
>
> It shouldn't happen if you use kvm_get_kvm and kvm_put_kvm properly.  It
> is almost okay in the patch, just:
>

How about if KVM releases kvm-vfio device between vfio_group_get_usrdata()
and get_kvm()?

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Paolo Bonzini]

On 19/10/2016 15:39, Xiao Guangrong wrote:
> 
> 
> On 10/19/2016 07:56 PM, Paolo Bonzini wrote:
>>
>>
>> On 19/10/2016 07:45, Xiao Guangrong wrote:
>>>
>>>
>>> On 10/19/2016 10:32 AM, Jike Song wrote:
>>> +EXPORT_SYMBOL_GPL(vfio_group_set_usrdata);
>>>>>> +
>>>>>> +void *vfio_group_get_usrdata(struct vfio_group *group)
>>>>>> +{
>>>>>> +    return group->usrdata;
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata);
>>>>>> +
>>>>>> +void *vfio_group_get_usrdata_by_device(struct device *dev)
>>>>>> +{
>>>>>> +    struct vfio_group *vfio_group;
>>>>>> +
>>>>>> +    vfio_group = __vfio_group_get_from_iommu(dev->iommu_group);
>>>>>
>>>>> We actually need to use iommu_group_get() here.  Kirti adds a
>>>>> vfio_group_get_from_dev() in v9 03/12 that does this properly.
>>>>>
>>>>>> +    if (!vfio_group)
>>>>>> +        return NULL;
>>>>>> +
>>>>>> +    return vfio_group_get_usrdata(vfio_group);
>>>
>>> I am worrying if the kvm instance got from group->usrdata is safe
>>> enough? What happens if you get the instance after kvm released
>>> kvm-vfio device?
>>
>> It shouldn't happen if you use kvm_get_kvm and kvm_put_kvm properly.  It
>> is almost okay in the patch, just:
> 
> How about if KVM releases kvm-vfio device between vfio_group_get_usrdata()
> and get_kvm()?

That cannot happen as long as there is a struct file* for the device
(see kvm_ioctl_create_device and kvm_device_release).  Since you're
sending a ioctl to it, it's fine.

Paolo

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Xiao Guangrong]

On 10/19/2016 10:14 PM, Paolo Bonzini wrote:
>
>
> On 19/10/2016 15:39, Xiao Guangrong wrote:
>>
>>
>> On 10/19/2016 07:56 PM, Paolo Bonzini wrote:
>>>
>>>
>>> On 19/10/2016 07:45, Xiao Guangrong wrote:
>>>>
>>>>
>>>> On 10/19/2016 10:32 AM, Jike Song wrote:
>>>> +EXPORT_SYMBOL_GPL(vfio_group_set_usrdata);
>>>>>>> +
>>>>>>> +void *vfio_group_get_usrdata(struct vfio_group *group)
>>>>>>> +{
>>>>>>> +    return group->usrdata;
>>>>>>> +}
>>>>>>> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata);
>>>>>>> +
>>>>>>> +void *vfio_group_get_usrdata_by_device(struct device *dev)
>>>>>>> +{
>>>>>>> +    struct vfio_group *vfio_group;
>>>>>>> +
>>>>>>> +    vfio_group = __vfio_group_get_from_iommu(dev->iommu_group);
>>>>>>
>>>>>> We actually need to use iommu_group_get() here.  Kirti adds a
>>>>>> vfio_group_get_from_dev() in v9 03/12 that does this properly.
>>>>>>
>>>>>>> +    if (!vfio_group)
>>>>>>> +        return NULL;
>>>>>>> +
>>>>>>> +    return vfio_group_get_usrdata(vfio_group);
>>>>
>>>> I am worrying if the kvm instance got from group->usrdata is safe
>>>> enough? What happens if you get the instance after kvm released
>>>> kvm-vfio device?
>>>
>>> It shouldn't happen if you use kvm_get_kvm and kvm_put_kvm properly.  It
>>> is almost okay in the patch, just:
>>
>> How about if KVM releases kvm-vfio device between vfio_group_get_usrdata()
>> and get_kvm()?
>
> That cannot happen as long as there is a struct file* for the device
> (see kvm_ioctl_create_device and kvm_device_release).  Since you're
> sending a ioctl to it, it's fine.

I understood that KVM side is safe, however, vfio side is independent with
kvm and the user of usrdata can fetch kvm struct at any time, consider
this scenario:

CPU 0                         CPU 1
KVM:                         VFIO/userdata user
   kvm_ioctl_create_device
      get_kvm()
                             vfio_group_get_usrdata(vfio_group)
   kvm_device_release
     put_kvm()
                             !!! kvm refcount has gone
                             use KVM struct

Then, the user of userdata have fetched kvm struct but the refcount has already gone.

What i missed?

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Paolo Bonzini]

On 20/10/2016 03:48, Xiao Guangrong wrote:
> 
> 
> On 10/19/2016 10:14 PM, Paolo Bonzini wrote:
>>
>>
>> On 19/10/2016 15:39, Xiao Guangrong wrote:
>>>
>>>
>>> On 10/19/2016 07:56 PM, Paolo Bonzini wrote:
>>>>
>>>>
>>>> On 19/10/2016 07:45, Xiao Guangrong wrote:
>>>>>
>>>>>
>>>>> On 10/19/2016 10:32 AM, Jike Song wrote:
>>>>> +EXPORT_SYMBOL_GPL(vfio_group_set_usrdata);
>>>>>>>> +
>>>>>>>> +void *vfio_group_get_usrdata(struct vfio_group *group)
>>>>>>>> +{
>>>>>>>> +    return group->usrdata;
>>>>>>>> +}
>>>>>>>> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata);
>>>>>>>> +
>>>>>>>> +void *vfio_group_get_usrdata_by_device(struct device *dev)
>>>>>>>> +{
>>>>>>>> +    struct vfio_group *vfio_group;
>>>>>>>> +
>>>>>>>> +    vfio_group = __vfio_group_get_from_iommu(dev->iommu_group);
>>>>>>>
>>>>>>> We actually need to use iommu_group_get() here.  Kirti adds a
>>>>>>> vfio_group_get_from_dev() in v9 03/12 that does this properly.
>>>>>>>
>>>>>>>> +    if (!vfio_group)
>>>>>>>> +        return NULL;
>>>>>>>> +
>>>>>>>> +    return vfio_group_get_usrdata(vfio_group);
>>>>>
>>>>> I am worrying if the kvm instance got from group->usrdata is safe
>>>>> enough? What happens if you get the instance after kvm released
>>>>> kvm-vfio device?
>>>>
>>>> It shouldn't happen if you use kvm_get_kvm and kvm_put_kvm
>>>> properly.  It
>>>> is almost okay in the patch, just:
>>>
>>> How about if KVM releases kvm-vfio device between
>>> vfio_group_get_usrdata()
>>> and get_kvm()?
>>
>> That cannot happen as long as there is a struct file* for the device
>> (see kvm_ioctl_create_device and kvm_device_release).  Since you're
>> sending a ioctl to it, it's fine.
> 
> I understood that KVM side is safe, however, vfio side is independent with
> kvm and the user of usrdata can fetch kvm struct at any time, consider
> this scenario:
> 
> CPU 0                         CPU 1
> KVM:                         VFIO/userdata user
>   kvm_ioctl_create_device
>      get_kvm()
>                             vfio_group_get_usrdata(vfio_group)
>   kvm_device_release
>     put_kvm()
>                             !!! kvm refcount has gone
>                             use KVM struct
> 
> Then, the user of userdata have fetched kvm struct but the refcount has
> already gone.

vfio_group_set_usrdata (actually) kvm_vfio_group_set_kvm has called
kvm_get_kvm too, however.  What you need is a mutex that is taken by
vfio_group_set_usrdata and by the callers of vfio_group_get_usrdata.

Paolo

> What i missed?
> -- 
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Xiao, Guangrong]

-----Original Message-----
From: Paolo Bonzini [mailto:paolo.bonzini@gmail.com] On Behalf Of Paolo Bonzini
Sent: Friday, October 21, 2016 1:07 AM
To: Xiao Guangrong <guangrong.xiao@linux.intel.com>; Xiao, Guangrong <guangrong.xiao@intel.com>; Song, Jike <jike.song@intel.com>; Alex Williamson <alex.williamson@redhat.com>
Cc: Tian, Kevin <kevin.tian@intel.com>; Neo Jia <cjia@nvidia.com>; kvm@vger.kernel.org; qemu-devel <qemu-devel@nongnu.org>; Chen, Xiaoguang <xiaoguang.chen@intel.com>; Kirti Wankhede <kwankhede@nvidia.com>
Subject: Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot



On 20/10/2016 03:48, Xiao Guangrong wrote:
> 
> 
> On 10/19/2016 10:14 PM, Paolo Bonzini wrote:
>>
>>
>> On 19/10/2016 15:39, Xiao Guangrong wrote:
>>>
>>>
>>> On 10/19/2016 07:56 PM, Paolo Bonzini wrote:
>>>>
>>>>
>>>> On 19/10/2016 07:45, Xiao Guangrong wrote:
>>>>>
>>>>>
>>>>> On 10/19/2016 10:32 AM, Jike Song wrote:
>>>>> +EXPORT_SYMBOL_GPL(vfio_group_set_usrdata);
>>>>>>>> +
>>>>>>>> +void *vfio_group_get_usrdata(struct vfio_group *group) {
>>>>>>>> +    return group->usrdata;
>>>>>>>> +}
>>>>>>>> +EXPORT_SYMBOL_GPL(vfio_group_get_usrdata);
>>>>>>>> +
>>>>>>>> +void *vfio_group_get_usrdata_by_device(struct device *dev) {
>>>>>>>> +    struct vfio_group *vfio_group;
>>>>>>>> +
>>>>>>>> +    vfio_group = 
>>>>>>>> + __vfio_group_get_from_iommu(dev->iommu_group);
>>>>>>>
>>>>>>> We actually need to use iommu_group_get() here.  Kirti adds a
>>>>>>> vfio_group_get_from_dev() in v9 03/12 that does this properly.
>>>>>>>
>>>>>>>> +    if (!vfio_group)
>>>>>>>> +        return NULL;
>>>>>>>> +
>>>>>>>> +    return vfio_group_get_usrdata(vfio_group);
>>>>>
>>>>> I am worrying if the kvm instance got from group->usrdata is safe 
>>>>> enough? What happens if you get the instance after kvm released 
>>>>> kvm-vfio device?
>>>>
>>>> It shouldn't happen if you use kvm_get_kvm and kvm_put_kvm 
>>>> properly.  It is almost okay in the patch, just:
>>>
>>> How about if KVM releases kvm-vfio device between
>>> vfio_group_get_usrdata()
>>> and get_kvm()?
>>
>> That cannot happen as long as there is a struct file* for the device 
>> (see kvm_ioctl_create_device and kvm_device_release).  Since you're 
>> sending a ioctl to it, it's fine.
> 
> I understood that KVM side is safe, however, vfio side is independent 
> with kvm and the user of usrdata can fetch kvm struct at any time, 
> consider this scenario:
> 
> CPU 0                         CPU 1
> KVM:                         VFIO/userdata user
>   kvm_ioctl_create_device
>      get_kvm()
>                             vfio_group_get_usrdata(vfio_group)
>   kvm_device_release
>     put_kvm()
>                             !!! kvm refcount has gone
>                             use KVM struct
> 
> Then, the user of userdata have fetched kvm struct but the refcount 
> has already gone.

vfio_group_set_usrdata (actually) kvm_vfio_group_set_kvm has called kvm_get_kvm too, however.  What you need is a mutex that is taken by vfio_group_set_usrdata and by the callers of vfio_group_get_usrdata.

Yes, mutex can fix it and is good to me. :)

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Jike Song]

On 10/21/2016 01:19 AM, Xiao, Guangrong wrote:
>> On 10/19/2016 10:14 PM, Paolo Bonzini wrote:
>>> On 19/10/2016 15:39, Xiao Guangrong wrote:
>>>
>>>
>>> I understood that KVM side is safe, however, vfio side is independent 
>>> with kvm and the user of usrdata can fetch kvm struct at any time, 
>>> consider this scenario:
>>>
>>> CPU 0                         CPU 1
>>> KVM:                         VFIO/userdata user
>>>   kvm_ioctl_create_device
>>>      get_kvm()
>>>                             vfio_group_get_usrdata(vfio_group)
>>>   kvm_device_release
>>>     put_kvm()
>>>                             !!! kvm refcount has gone
>>>                             use KVM struct
>>>
>>> Then, the user of userdata have fetched kvm struct but the refcount 
>>> has already gone.
>> 
>> vfio_group_set_usrdata (actually) kvm_vfio_group_set_kvm has called
>>kvm_get_kvm too, however.  What you need is a mutex that is taken by
>>vfio_group_set_usrdata and by the callers of vfio_group_get_usrdata.
> 
> Yes, mutex can fix it and is good to me. :)

Thanks everyone, I'll cook another patch according to your guidance.

--
Thanks,
Jike

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Jike Song]

On 10/21/2016 01:06 AM, Paolo Bonzini wrote:
> On 20/10/2016 03:48, Xiao Guangrong wrote:
>> I understood that KVM side is safe, however, vfio side is independent with
>> kvm and the user of usrdata can fetch kvm struct at any time, consider
>> this scenario:
>>
>> CPU 0                         CPU 1
>> KVM:                         VFIO/userdata user
>>   kvm_ioctl_create_device
>>      get_kvm()
>>                             vfio_group_get_usrdata(vfio_group)
>>   kvm_device_release
>>     put_kvm()
>>                             !!! kvm refcount has gone
>>                             use KVM struct
>>
>> Then, the user of userdata have fetched kvm struct but the refcount has
>> already gone.
> 
> vfio_group_set_usrdata (actually) kvm_vfio_group_set_kvm has called
> kvm_get_kvm too, however.  What you need is a mutex that is taken by
> vfio_group_set_usrdata and by the callers of vfio_group_get_usrdata.

Hi Paolo & Guangrong,

I walked the whole thread and became a little nervous: I don't want
to introduce a global mutex.

The problem is, as I understand, vfio_group_get_usrdata() returns a
KVM pointer but it may be stale. To make the pointer always valid,
it can call kvm_get_kvm() *before* return the pointer.

I would apologize in advance if this idea turns out totally
nonsense, but hey, please kindly help fix my whim :-)


[vfio.h]

	struct vfio_usrdata {
		void *data;
		void (*get)(void *data);
		void (*put)(void *data)
	};

	vfio_group {
		...
		vfio_usrdata *usrdata;

[kvm.ko]

	struvt vfio_usrdata kvmdata = {
		.data = kvm,
		.get = kvm_get_kvm,
		.put = kvm_put_kvm,
	};

	fn = symbol_get(vfio_group_set_usrdata)
	fn(vfio_group, &kvmdata)


[vfio.ko]

	vfio_group_set_usrdata
		lock
		vfio_group->d = kvmdata
		unlock

	void *vfio_group_get_usrdata
		lock
		struct vfio_usrdata *d = vfio_group->usrdata;
		d->get(d->data);
		unlock
		return d->data;

	void vfio_group_put_usrdata
		lock
		struct vfio_usrdata *d = vfio_group->usrdata;
		d->put(d->data)
		unlock

[kvmgt.ko]

	call vfio_group_get_usrdata to get kvm,
	call vfio_group_put_usrdata to release it
	*never* call kvm_get_kvm/kvm_put_kvm

--
Thanks,
Jike

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Paolo Bonzini]

On 26/10/2016 15:44, Jike Song wrote:
> On 10/21/2016 01:06 AM, Paolo Bonzini wrote:
>> On 20/10/2016 03:48, Xiao Guangrong wrote:
>>> I understood that KVM side is safe, however, vfio side is independent with
>>> kvm and the user of usrdata can fetch kvm struct at any time, consider
>>> this scenario:
>>>
>>> CPU 0                         CPU 1
>>> KVM:                         VFIO/userdata user
>>>   kvm_ioctl_create_device
>>>      get_kvm()
>>>                             vfio_group_get_usrdata(vfio_group)
>>>   kvm_device_release
>>>     put_kvm()
>>>                             !!! kvm refcount has gone
>>>                             use KVM struct
>>>
>>> Then, the user of userdata have fetched kvm struct but the refcount has
>>> already gone.
>>
>> vfio_group_set_usrdata (actually) kvm_vfio_group_set_kvm has called
>> kvm_get_kvm too, however.  What you need is a mutex that is taken by
>> vfio_group_set_usrdata and by the callers of vfio_group_get_usrdata.
> 
> Hi Paolo & Guangrong,
> 
> I walked the whole thread and became a little nervous: I don't want
> to introduce a global mutex.
> 
> The problem is, as I understand, vfio_group_get_usrdata() returns a
> KVM pointer but it may be stale. To make the pointer always valid,
> it can call kvm_get_kvm() *before* return the pointer.

That doesn't work, you still have to protect get against concurrent set.
 But the mutex need not be global, it is specific to the vfio device.
You probably have such a mutex anyway...

Paolo

> I would apologize in advance if this idea turns out totally
> nonsense, but hey, please kindly help fix my whim :-)
> 
> 
> [vfio.h]
> 
> 	struct vfio_usrdata {
> 		void *data;
> 		void (*get)(void *data);
> 		void (*put)(void *data)
> 	};
> 
> 	vfio_group {
> 		...
> 		vfio_usrdata *usrdata;
> 
> [kvm.ko]
> 
> 	struvt vfio_usrdata kvmdata = {
> 		.data = kvm,
> 		.get = kvm_get_kvm,
> 		.put = kvm_put_kvm,
> 	};
> 
> 	fn = symbol_get(vfio_group_set_usrdata)
> 	fn(vfio_group, &kvmdata)
> 
> 
> [vfio.ko]
> 
> 	vfio_group_set_usrdata
> 		lock
> 		vfio_group->d = kvmdata
> 		unlock
> 
> 	void *vfio_group_get_usrdata
> 		lock
> 		struct vfio_usrdata *d = vfio_group->usrdata;
> 		d->get(d->data);
> 		unlock
> 		return d->data;
> 
> 	void vfio_group_put_usrdata
> 		lock
> 		struct vfio_usrdata *d = vfio_group->usrdata;
> 		d->put(d->data)
> 		unlock
> 
> [kvmgt.ko]
> 
> 	call vfio_group_get_usrdata to get kvm,
> 	call vfio_group_put_usrdata to release it
> 	*never* call kvm_get_kvm/kvm_put_kvm
> 
> --
> Thanks,
> Jike
> 

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Jike Song]

On 10/26/2016 10:45 PM, Paolo Bonzini wrote:
> On 26/10/2016 15:44, Jike Song wrote:
>> On 10/21/2016 01:06 AM, Paolo Bonzini wrote:
>>> On 20/10/2016 03:48, Xiao Guangrong wrote:
>>>> I understood that KVM side is safe, however, vfio side is independent with
>>>> kvm and the user of usrdata can fetch kvm struct at any time, consider
>>>> this scenario:
>>>>
>>>> CPU 0                         CPU 1
>>>> KVM:                         VFIO/userdata user
>>>>   kvm_ioctl_create_device
>>>>      get_kvm()
>>>>                             vfio_group_get_usrdata(vfio_group)
>>>>   kvm_device_release
>>>>     put_kvm()
>>>>                             !!! kvm refcount has gone
>>>>                             use KVM struct
>>>>
>>>> Then, the user of userdata have fetched kvm struct but the refcount has
>>>> already gone.
>>>
>>> vfio_group_set_usrdata (actually) kvm_vfio_group_set_kvm has called
>>> kvm_get_kvm too, however.  What you need is a mutex that is taken by
>>> vfio_group_set_usrdata and by the callers of vfio_group_get_usrdata.
>>
>> Hi Paolo & Guangrong,
>>
>> I walked the whole thread and became a little nervous: I don't want
>> to introduce a global mutex.
>>
>> The problem is, as I understand, vfio_group_get_usrdata() returns a
>> KVM pointer but it may be stale. To make the pointer always valid,
>> it can call kvm_get_kvm() *before* return the pointer.
> 
> That doesn't work, you still have to protect get against concurrent set.
>  But the mutex need not be global, it is specific to the vfio device.
> You probably have such a mutex anyway...

Thanks Paolo, I agree whatsoever a mutex is necessary. I cooked a patch
sent to you and Alex, please kindly have a look :-)

--
Thanks,
Jike

>> I would apologize in advance if this idea turns out totally
>> nonsense, but hey, please kindly help fix my whim :-)
>>
>>
>> [vfio.h]
>>
>> 	struct vfio_usrdata {
>> 		void *data;
>> 		void (*get)(void *data);
>> 		void (*put)(void *data)
>> 	};
>>
>> 	vfio_group {
>> 		...
>> 		vfio_usrdata *usrdata;
>>
>> [kvm.ko]
>>
>> 	struvt vfio_usrdata kvmdata = {
>> 		.data = kvm,
>> 		.get = kvm_get_kvm,
>> 		.put = kvm_put_kvm,
>> 	};
>>
>> 	fn = symbol_get(vfio_group_set_usrdata)
>> 	fn(vfio_group, &kvmdata)
>>
>>
>> [vfio.ko]
>>
>> 	vfio_group_set_usrdata
>> 		lock
>> 		vfio_group->d = kvmdata
>> 		unlock
>>
>> 	void *vfio_group_get_usrdata
>> 		lock
>> 		struct vfio_usrdata *d = vfio_group->usrdata;
>> 		d->get(d->data);
>> 		unlock
>> 		return d->data;
>>
>> 	void vfio_group_put_usrdata
>> 		lock
>> 		struct vfio_usrdata *d = vfio_group->usrdata;
>> 		d->put(d->data)
>> 		unlock
>>
>> [kvmgt.ko]
>>
>> 	call vfio_group_get_usrdata to get kvm,
>> 	call vfio_group_put_usrdata to release it
>> 	*never* call kvm_get_kvm/kvm_put_kvm

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Eric Blake]

[-- Attachment #1: Type: text/plain, Size: 925 bytes --]

[meta-comment]

On 10/18/2016 09:32 PM, Jike Song wrote:
> On 10/18/2016 10:59 PM, Alex Williamson wrote:
...
>>>>>>>>>>>>>>> On 10/10/2016 20:01, Neo Jia wrote:          
>>>>>>>>>>>>>>>>> Hi Neo,

17 levels of quoting is rather over-the-top.  It is OKAY (and in fact
DESIRABLE) to trim your emails to relevant portions, when posting to a
high-volume list.  Readers shouldn't have to scroll through pages of
deeply-nested quoting...

>>>  
>>>  	mutex_lock(&vfio.group_lock);
>>>  	list_for_each_entry(group, &vfio.group_list, vfio_next) {
>>>  		if (group->iommu_group == iommu_group) {
>>> -			vfio_group_get(group);
>>
>> This is wrong, we can't add our reference after we release the lock.
>>
> 
> Thanks for pointing it out :)
> 

...to get to the much smaller meat of the message.

-- 
Eric Blake   eblake redhat com    +1-919-301-3266
Libvirt virtualization library http://libvirt.org


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]

Re: [Qemu-devel] [PATCH 1/2] KVM: page track: add a new notifier type: track_flush_slot

[Jike Song]

On 10/19/2016 09:56 PM, Eric Blake wrote:
> 17 levels of quoting is rather over-the-top.  It is OKAY (and in fact
> DESIRABLE) to trim your emails to relevant portions, when posting to a
> high-volume list.  Readers shouldn't have to scroll through pages of
> deeply-nested quoting...

Hi Eric,

Sorry for that, will trim the quotation next time. Thanks for
reminding!

--
Thanks,
Jike