qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Huth <thuth@redhat.com>
To: Jiaxun Yang <jiaxun.yang@flygoat.com>, qemu-devel@nongnu.org
Cc: "Kevin Wolf" <kwolf@redhat.com>, "Fam Zheng" <fam@euphon.net>,
	kvm@vger.kernel.org,
	"Viktor Prutyanov" <viktor.prutyanov@phystech.edu>,
	"Laurent Vivier" <lvivier@redhat.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	"Alistair Francis" <alistair@alistair23.me>,
	"Greg Kurz" <groug@kaod.org>,
	"Wainer dos Santos Moschetta" <wainersm@redhat.com>,
	"Max Reitz" <mreitz@redhat.com>,
	qemu-ppc@nongnu.org, "Paolo Bonzini" <pbonzini@redhat.com>,
	qemu-block@nongnu.org,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>,
	"David Gibson" <david@gibson.dropbear.id.au>
Subject: Re: [PATCH 8/9] tests: Rename PAGE_SIZE definitions
Date: Wed, 13 Jan 2021 08:21:28 +0100	[thread overview]
Message-ID: <5a3eee44-5d26-7cf8-c9e6-d6864ea522ca@redhat.com> (raw)
In-Reply-To: <20201221005318.11866-9-jiaxun.yang@flygoat.com>

On 21/12/2020 01.53, Jiaxun Yang wrote:
> As per POSIX specification of limits.h [1], OS libc may define
> PAGE_SIZE in limits.h.
> 
> Self defined PAGE_SIZE is frequently used in tests, to prevent
> collosion of definition, we give PAGE_SIZE definitons reasonable
> prefixs.
> 
> [1]: https://pubs.opengroup.org/onlinepubs/7908799/xsh/limits.h.html
> 
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
>   tests/migration/stress.c            | 10 ++---
>   tests/qtest/libqos/malloc-pc.c      |  4 +-
>   tests/qtest/libqos/malloc-spapr.c   |  4 +-
>   tests/qtest/m25p80-test.c           | 54 +++++++++++-----------
>   tests/tcg/multiarch/system/memory.c |  6 +--
>   tests/test-xbzrle.c                 | 70 ++++++++++++++---------------
>   6 files changed, 74 insertions(+), 74 deletions(-)
> 
> diff --git a/tests/migration/stress.c b/tests/migration/stress.c
> index de45e8e490..b7240a15c8 100644
> --- a/tests/migration/stress.c
> +++ b/tests/migration/stress.c
> @@ -27,7 +27,7 @@
>   
>   const char *argv0;
>   
> -#define PAGE_SIZE 4096
> +#define RAM_PAGE_SIZE 4096
>   
>   #ifndef CONFIG_GETTID
>   static int gettid(void)
> @@ -158,11 +158,11 @@ static unsigned long long now(void)
>   
>   static void stressone(unsigned long long ramsizeMB)
>   {
> -    size_t pagesPerMB = 1024 * 1024 / PAGE_SIZE;
> +    size_t pagesPerMB = 1024 * 1024 / RAM_PAGE_SIZE;
>       g_autofree char *ram = g_malloc(ramsizeMB * 1024 * 1024);
>       char *ramptr;
>       size_t i, j, k;
> -    g_autofree char *data = g_malloc(PAGE_SIZE);
> +    g_autofree char *data = g_malloc(RAM_PAGE_SIZE);
>       char *dataptr;
>       size_t nMB = 0;
>       unsigned long long before, after;
> @@ -174,7 +174,7 @@ static void stressone(unsigned long long ramsizeMB)
>        * calloc instead :-) */
>       memset(ram, 0xfe, ramsizeMB * 1024 * 1024);
>   
> -    if (random_bytes(data, PAGE_SIZE) < 0) {
> +    if (random_bytes(data, RAM_PAGE_SIZE) < 0) {
>           return;
>       }
>   
> @@ -186,7 +186,7 @@ static void stressone(unsigned long long ramsizeMB)
>           for (i = 0; i < ramsizeMB; i++, nMB++) {
>               for (j = 0; j < pagesPerMB; j++) {
>                   dataptr = data;
> -                for (k = 0; k < PAGE_SIZE; k += sizeof(long long)) {
> +                for (k = 0; k < RAM_PAGE_SIZE; k += sizeof(long long)) {
>                       ramptr += sizeof(long long);
>                       dataptr += sizeof(long long);
>                       *(unsigned long long *)ramptr ^= *(unsigned long long *)dataptr;
> diff --git a/tests/qtest/libqos/malloc-pc.c b/tests/qtest/libqos/malloc-pc.c
> index 16ff9609cc..f1e3b392a5 100644
> --- a/tests/qtest/libqos/malloc-pc.c
> +++ b/tests/qtest/libqos/malloc-pc.c
> @@ -18,7 +18,7 @@
>   
>   #include "qemu-common.h"
>   
> -#define PAGE_SIZE (4096)
> +#define ALLOC_PAGE_SIZE (4096)
>   
>   void pc_alloc_init(QGuestAllocator *s, QTestState *qts, QAllocOpts flags)
>   {
> @@ -26,7 +26,7 @@ void pc_alloc_init(QGuestAllocator *s, QTestState *qts, QAllocOpts flags)
>       QFWCFG *fw_cfg = pc_fw_cfg_init(qts);
>   
>       ram_size = qfw_cfg_get_u64(fw_cfg, FW_CFG_RAM_SIZE);
> -    alloc_init(s, flags, 1 << 20, MIN(ram_size, 0xE0000000), PAGE_SIZE);
> +    alloc_init(s, flags, 1 << 20, MIN(ram_size, 0xE0000000), ALLOC_PAGE_SIZE);
>   
>       /* clean-up */
>       pc_fw_cfg_uninit(fw_cfg);
> diff --git a/tests/qtest/libqos/malloc-spapr.c b/tests/qtest/libqos/malloc-spapr.c
> index 84862e4876..05b306c191 100644
> --- a/tests/qtest/libqos/malloc-spapr.c
> +++ b/tests/qtest/libqos/malloc-spapr.c
> @@ -10,7 +10,7 @@
>   
>   #include "qemu-common.h"
>   
> -#define PAGE_SIZE 4096
> +#define SPAPR_PAGE_SIZE 4096
>   
>   /* Memory must be a multiple of 256 MB,
>    * so we have at least 256MB
> @@ -19,5 +19,5 @@
>   
>   void spapr_alloc_init(QGuestAllocator *s, QTestState *qts, QAllocOpts flags)
>   {
> -    alloc_init(s, flags, 1 << 20, SPAPR_MIN_SIZE, PAGE_SIZE);
> +    alloc_init(s, flags, 1 << 20, SPAPR_MIN_SIZE, SPAPR_PAGE_SIZE);
>   }
> diff --git a/tests/qtest/m25p80-test.c b/tests/qtest/m25p80-test.c
> index 50c6b79fb3..f860cef5f0 100644
> --- a/tests/qtest/m25p80-test.c
> +++ b/tests/qtest/m25p80-test.c
> @@ -62,7 +62,7 @@ enum {
>   #define FLASH_JEDEC         0x20ba19  /* n25q256a */
>   #define FLASH_SIZE          (32 * 1024 * 1024)
>   
> -#define PAGE_SIZE           256
> +#define FLASH_PAGE_SIZE           256
>   
>   /*
>    * Use an explicit bswap for the values read/wrote to the flash region
> @@ -165,7 +165,7 @@ static void read_page(uint32_t addr, uint32_t *page)
>       writel(ASPEED_FLASH_BASE, make_be32(addr));
>   
>       /* Continuous read are supported */
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           page[i] = make_be32(readl(ASPEED_FLASH_BASE));
>       }
>       spi_ctrl_stop_user();
> @@ -178,15 +178,15 @@ static void read_page_mem(uint32_t addr, uint32_t *page)
>       /* move out USER mode to use direct reads from the AHB bus */
>       spi_ctrl_setmode(CTRL_READMODE, READ);
>   
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           page[i] = make_be32(readl(ASPEED_FLASH_BASE + addr + i * 4));
>       }
>   }
>   
>   static void test_erase_sector(void)
>   {
> -    uint32_t some_page_addr = 0x600 * PAGE_SIZE;
> -    uint32_t page[PAGE_SIZE / 4];
> +    uint32_t some_page_addr = 0x600 * FLASH_PAGE_SIZE;
> +    uint32_t page[FLASH_PAGE_SIZE / 4];
>       int i;
>   
>       spi_conf(CONF_ENABLE_W0);
> @@ -200,14 +200,14 @@ static void test_erase_sector(void)
>   
>       /* Previous page should be full of zeroes as backend is not
>        * initialized */
> -    read_page(some_page_addr - PAGE_SIZE, page);
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    read_page(some_page_addr - FLASH_PAGE_SIZE, page);
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           g_assert_cmphex(page[i], ==, 0x0);
>       }
>   
>       /* But this one was erased */
>       read_page(some_page_addr, page);
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           g_assert_cmphex(page[i], ==, 0xffffffff);
>       }
>   
> @@ -216,8 +216,8 @@ static void test_erase_sector(void)
>   
>   static void test_erase_all(void)
>   {
> -    uint32_t some_page_addr = 0x15000 * PAGE_SIZE;
> -    uint32_t page[PAGE_SIZE / 4];
> +    uint32_t some_page_addr = 0x15000 * FLASH_PAGE_SIZE;
> +    uint32_t page[FLASH_PAGE_SIZE / 4];
>       int i;
>   
>       spi_conf(CONF_ENABLE_W0);
> @@ -225,7 +225,7 @@ static void test_erase_all(void)
>       /* Check some random page. Should be full of zeroes as backend is
>        * not initialized */
>       read_page(some_page_addr, page);
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           g_assert_cmphex(page[i], ==, 0x0);
>       }
>   
> @@ -236,7 +236,7 @@ static void test_erase_all(void)
>   
>       /* Recheck that some random page */
>       read_page(some_page_addr, page);
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           g_assert_cmphex(page[i], ==, 0xffffffff);
>       }
>   
> @@ -245,9 +245,9 @@ static void test_erase_all(void)
>   
>   static void test_write_page(void)
>   {
> -    uint32_t my_page_addr = 0x14000 * PAGE_SIZE; /* beyond 16MB */
> -    uint32_t some_page_addr = 0x15000 * PAGE_SIZE;
> -    uint32_t page[PAGE_SIZE / 4];
> +    uint32_t my_page_addr = 0x14000 * FLASH_PAGE_SIZE; /* beyond 16MB */
> +    uint32_t some_page_addr = 0x15000 * FLASH_PAGE_SIZE;
> +    uint32_t page[FLASH_PAGE_SIZE / 4];
>       int i;
>   
>       spi_conf(CONF_ENABLE_W0);
> @@ -259,20 +259,20 @@ static void test_write_page(void)
>       writel(ASPEED_FLASH_BASE, make_be32(my_page_addr));
>   
>       /* Fill the page with its own addresses */
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           writel(ASPEED_FLASH_BASE, make_be32(my_page_addr + i * 4));
>       }
>       spi_ctrl_stop_user();
>   
>       /* Check what was written */
>       read_page(my_page_addr, page);
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           g_assert_cmphex(page[i], ==, my_page_addr + i * 4);
>       }
>   
>       /* Check some other page. It should be full of 0xff */
>       read_page(some_page_addr, page);
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           g_assert_cmphex(page[i], ==, 0xffffffff);
>       }
>   
> @@ -281,9 +281,9 @@ static void test_write_page(void)
>   
>   static void test_read_page_mem(void)
>   {
> -    uint32_t my_page_addr = 0x14000 * PAGE_SIZE; /* beyond 16MB */
> -    uint32_t some_page_addr = 0x15000 * PAGE_SIZE;
> -    uint32_t page[PAGE_SIZE / 4];
> +    uint32_t my_page_addr = 0x14000 * FLASH_PAGE_SIZE; /* beyond 16MB */
> +    uint32_t some_page_addr = 0x15000 * FLASH_PAGE_SIZE;
> +    uint32_t page[FLASH_PAGE_SIZE / 4];
>       int i;
>   
>       /* Enable 4BYTE mode for controller. This is should be strapped by
> @@ -300,13 +300,13 @@ static void test_read_page_mem(void)
>   
>       /* Check what was written */
>       read_page_mem(my_page_addr, page);
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           g_assert_cmphex(page[i], ==, my_page_addr + i * 4);
>       }
>   
>       /* Check some other page. It should be full of 0xff */
>       read_page_mem(some_page_addr, page);
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           g_assert_cmphex(page[i], ==, 0xffffffff);
>       }
>   
> @@ -315,8 +315,8 @@ static void test_read_page_mem(void)
>   
>   static void test_write_page_mem(void)
>   {
> -    uint32_t my_page_addr = 0x15000 * PAGE_SIZE;
> -    uint32_t page[PAGE_SIZE / 4];
> +    uint32_t my_page_addr = 0x15000 * FLASH_PAGE_SIZE;
> +    uint32_t page[FLASH_PAGE_SIZE / 4];
>       int i;
>   
>       /* Enable 4BYTE mode for controller. This is should be strapped by
> @@ -334,14 +334,14 @@ static void test_write_page_mem(void)
>       /* move out USER mode to use direct writes to the AHB bus */
>       spi_ctrl_setmode(CTRL_WRITEMODE, PP);
>   
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           writel(ASPEED_FLASH_BASE + my_page_addr + i * 4,
>                  make_be32(my_page_addr + i * 4));
>       }
>   
>       /* Check what was written */
>       read_page_mem(my_page_addr, page);
> -    for (i = 0; i < PAGE_SIZE / 4; i++) {
> +    for (i = 0; i < FLASH_PAGE_SIZE / 4; i++) {
>           g_assert_cmphex(page[i], ==, my_page_addr + i * 4);
>       }
>   
> diff --git a/tests/tcg/multiarch/system/memory.c b/tests/tcg/multiarch/system/memory.c
> index d124502d73..eb0ec6f8eb 100644
> --- a/tests/tcg/multiarch/system/memory.c
> +++ b/tests/tcg/multiarch/system/memory.c
> @@ -20,12 +20,12 @@
>   # error "Target does not specify CHECK_UNALIGNED"
>   #endif
>   
> -#define PAGE_SIZE 4096             /* nominal 4k "pages" */
> -#define TEST_SIZE (PAGE_SIZE * 4)  /* 4 pages */
> +#define MEM_PAGE_SIZE 4096             /* nominal 4k "pages" */
> +#define TEST_SIZE (MEM_PAGE_SIZE * 4)  /* 4 pages */
>   
>   #define ARRAY_SIZE(x) ((sizeof(x) / sizeof((x)[0])))
>   
> -__attribute__((aligned(PAGE_SIZE)))
> +__attribute__((aligned(MEM_PAGE_SIZE)))
>   static uint8_t test_data[TEST_SIZE];
>   
>   typedef void (*init_ufn) (int offset);
> diff --git a/tests/test-xbzrle.c b/tests/test-xbzrle.c
> index f5e08de91e..795d6f1cba 100644
> --- a/tests/test-xbzrle.c
> +++ b/tests/test-xbzrle.c
> @@ -15,7 +15,7 @@
>   #include "qemu/cutils.h"
>   #include "../migration/xbzrle.h"
>   
> -#define PAGE_SIZE 4096
> +#define XBZRLE_PAGE_SIZE 4096
>   
>   static void test_uleb(void)
>   {
> @@ -41,11 +41,11 @@ static void test_uleb(void)
>   
>   static void test_encode_decode_zero(void)
>   {
> -    uint8_t *buffer = g_malloc0(PAGE_SIZE);
> -    uint8_t *compressed = g_malloc0(PAGE_SIZE);
> +    uint8_t *buffer = g_malloc0(XBZRLE_PAGE_SIZE);
> +    uint8_t *compressed = g_malloc0(XBZRLE_PAGE_SIZE);
>       int i = 0;
>       int dlen = 0;
> -    int diff_len = g_test_rand_int_range(0, PAGE_SIZE - 1006);
> +    int diff_len = g_test_rand_int_range(0, XBZRLE_PAGE_SIZE - 1006);
>   
>       for (i = diff_len; i > 0; i--) {
>           buffer[1000 + i] = i;
> @@ -55,8 +55,8 @@ static void test_encode_decode_zero(void)
>       buffer[1000 + diff_len + 5] = 105;
>   
>       /* encode zero page */
> -    dlen = xbzrle_encode_buffer(buffer, buffer, PAGE_SIZE, compressed,
> -                       PAGE_SIZE);
> +    dlen = xbzrle_encode_buffer(buffer, buffer, XBZRLE_PAGE_SIZE, compressed,
> +                       XBZRLE_PAGE_SIZE);
>       g_assert(dlen == 0);
>   
>       g_free(buffer);
> @@ -65,11 +65,11 @@ static void test_encode_decode_zero(void)
>   
>   static void test_encode_decode_unchanged(void)
>   {
> -    uint8_t *compressed = g_malloc0(PAGE_SIZE);
> -    uint8_t *test = g_malloc0(PAGE_SIZE);
> +    uint8_t *compressed = g_malloc0(XBZRLE_PAGE_SIZE);
> +    uint8_t *test = g_malloc0(XBZRLE_PAGE_SIZE);
>       int i = 0;
>       int dlen = 0;
> -    int diff_len = g_test_rand_int_range(0, PAGE_SIZE - 1006);
> +    int diff_len = g_test_rand_int_range(0, XBZRLE_PAGE_SIZE - 1006);
>   
>       for (i = diff_len; i > 0; i--) {
>           test[1000 + i] = i + 4;
> @@ -79,8 +79,8 @@ static void test_encode_decode_unchanged(void)
>       test[1000 + diff_len + 5] = 109;
>   
>       /* test unchanged buffer */
> -    dlen = xbzrle_encode_buffer(test, test, PAGE_SIZE, compressed,
> -                                PAGE_SIZE);
> +    dlen = xbzrle_encode_buffer(test, test, XBZRLE_PAGE_SIZE, compressed,
> +                                XBZRLE_PAGE_SIZE);
>       g_assert(dlen == 0);
>   
>       g_free(test);
> @@ -89,21 +89,21 @@ static void test_encode_decode_unchanged(void)
>   
>   static void test_encode_decode_1_byte(void)
>   {
> -    uint8_t *buffer = g_malloc0(PAGE_SIZE);
> -    uint8_t *test = g_malloc0(PAGE_SIZE);
> -    uint8_t *compressed = g_malloc(PAGE_SIZE);
> +    uint8_t *buffer = g_malloc0(XBZRLE_PAGE_SIZE);
> +    uint8_t *test = g_malloc0(XBZRLE_PAGE_SIZE);
> +    uint8_t *compressed = g_malloc(XBZRLE_PAGE_SIZE);
>       int dlen = 0, rc = 0;
>       uint8_t buf[2];
>   
> -    test[PAGE_SIZE - 1] = 1;
> +    test[XBZRLE_PAGE_SIZE - 1] = 1;
>   
> -    dlen = xbzrle_encode_buffer(buffer, test, PAGE_SIZE, compressed,
> -                       PAGE_SIZE);
> +    dlen = xbzrle_encode_buffer(buffer, test, XBZRLE_PAGE_SIZE, compressed,
> +                       XBZRLE_PAGE_SIZE);
>       g_assert(dlen == (uleb128_encode_small(&buf[0], 4095) + 2));
>   
> -    rc = xbzrle_decode_buffer(compressed, dlen, buffer, PAGE_SIZE);
> -    g_assert(rc == PAGE_SIZE);
> -    g_assert(memcmp(test, buffer, PAGE_SIZE) == 0);
> +    rc = xbzrle_decode_buffer(compressed, dlen, buffer, XBZRLE_PAGE_SIZE);
> +    g_assert(rc == XBZRLE_PAGE_SIZE);
> +    g_assert(memcmp(test, buffer, XBZRLE_PAGE_SIZE) == 0);
>   
>       g_free(buffer);
>       g_free(compressed);
> @@ -112,18 +112,18 @@ static void test_encode_decode_1_byte(void)
>   
>   static void test_encode_decode_overflow(void)
>   {
> -    uint8_t *compressed = g_malloc0(PAGE_SIZE);
> -    uint8_t *test = g_malloc0(PAGE_SIZE);
> -    uint8_t *buffer = g_malloc0(PAGE_SIZE);
> +    uint8_t *compressed = g_malloc0(XBZRLE_PAGE_SIZE);
> +    uint8_t *test = g_malloc0(XBZRLE_PAGE_SIZE);
> +    uint8_t *buffer = g_malloc0(XBZRLE_PAGE_SIZE);
>       int i = 0, rc = 0;
>   
> -    for (i = 0; i < PAGE_SIZE / 2 - 1; i++) {
> +    for (i = 0; i < XBZRLE_PAGE_SIZE / 2 - 1; i++) {
>           test[i * 2] = 1;
>       }
>   
>       /* encode overflow */
> -    rc = xbzrle_encode_buffer(buffer, test, PAGE_SIZE, compressed,
> -                              PAGE_SIZE);
> +    rc = xbzrle_encode_buffer(buffer, test, XBZRLE_PAGE_SIZE, compressed,
> +                              XBZRLE_PAGE_SIZE);
>       g_assert(rc == -1);
>   
>       g_free(buffer);
> @@ -133,13 +133,13 @@ static void test_encode_decode_overflow(void)
>   
>   static void encode_decode_range(void)
>   {
> -    uint8_t *buffer = g_malloc0(PAGE_SIZE);
> -    uint8_t *compressed = g_malloc(PAGE_SIZE);
> -    uint8_t *test = g_malloc0(PAGE_SIZE);
> +    uint8_t *buffer = g_malloc0(XBZRLE_PAGE_SIZE);
> +    uint8_t *compressed = g_malloc(XBZRLE_PAGE_SIZE);
> +    uint8_t *test = g_malloc0(XBZRLE_PAGE_SIZE);
>       int i = 0, rc = 0;
>       int dlen = 0;
>   
> -    int diff_len = g_test_rand_int_range(0, PAGE_SIZE - 1006);
> +    int diff_len = g_test_rand_int_range(0, XBZRLE_PAGE_SIZE - 1006);
>   
>       for (i = diff_len; i > 0; i--) {
>           buffer[1000 + i] = i;
> @@ -153,12 +153,12 @@ static void encode_decode_range(void)
>       test[1000 + diff_len + 5] = 109;
>   
>       /* test encode/decode */
> -    dlen = xbzrle_encode_buffer(test, buffer, PAGE_SIZE, compressed,
> -                                PAGE_SIZE);
> +    dlen = xbzrle_encode_buffer(test, buffer, XBZRLE_PAGE_SIZE, compressed,
> +                                XBZRLE_PAGE_SIZE);
>   
> -    rc = xbzrle_decode_buffer(compressed, dlen, test, PAGE_SIZE);
> -    g_assert(rc < PAGE_SIZE);
> -    g_assert(memcmp(test, buffer, PAGE_SIZE) == 0);
> +    rc = xbzrle_decode_buffer(compressed, dlen, test, XBZRLE_PAGE_SIZE);
> +    g_assert(rc < XBZRLE_PAGE_SIZE);
> +    g_assert(memcmp(test, buffer, XBZRLE_PAGE_SIZE) == 0);
>   
>       g_free(buffer);
>       g_free(compressed);
> 

Reviewed-by: Thomas Huth <thuth@redhat.com>



  reply	other threads:[~2021-01-13  7:37 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-21  0:53 [PATCH 0/9] Alpine Linux build fix and CI pipeline Jiaxun Yang
2020-12-21  0:53 ` [PATCH 1/9] tests/docker: Add dockerfile for Alpine Linux Jiaxun Yang
2020-12-22 18:37   ` Wainer dos Santos Moschetta
2020-12-21  0:53 ` [PATCH 2/9] configure: Add sys/timex.h to probe clk_adjtime Jiaxun Yang
2021-01-13  6:59   ` Thomas Huth
2020-12-21  0:53 ` [PATCH 3/9] configure/meson: Only check sys/signal.h on non-Linux Jiaxun Yang
2021-01-13  7:05   ` Thomas Huth
2021-01-13 11:36     ` Peter Maydell
2020-12-21  0:53 ` [PATCH 4/9] libvhost-user: Include poll.h instead of sys/poll.h Jiaxun Yang
2021-01-13  7:08   ` Thomas Huth
2020-12-21  0:53 ` [PATCH 5/9] elf2dmp: Rename PAGE_SIZE to ELF2DMP_PAGE_SIZE Jiaxun Yang
2021-01-13  7:14   ` Thomas Huth
2020-12-21  0:53 ` [PATCH 6/9] hw/block/nand: Rename PAGE_SIZE to NAND_PAGE_SIZE Jiaxun Yang
2021-01-13  7:16   ` Thomas Huth
2020-12-21  0:53 ` [PATCH 7/9] accel/kvm: avoid using predefined PAGE_SIZE Jiaxun Yang
2021-01-13  7:19   ` Thomas Huth
2021-01-13  9:07     ` Jiaxun Yang
2020-12-21  0:53 ` [PATCH 8/9] tests: Rename PAGE_SIZE definitions Jiaxun Yang
2021-01-13  7:21   ` Thomas Huth [this message]
2020-12-21  0:53 ` [PATCH 9/9] gitlab-ci: Add alpine to pipeline Jiaxun Yang
2020-12-21  1:06 ` [PATCH 0/9] Alpine Linux build fix and CI pipeline no-reply
2020-12-21  8:25   ` Jiaxun Yang
2020-12-22 18:41     ` Wainer dos Santos Moschetta
2020-12-23  0:54       ` Jiaxun Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5a3eee44-5d26-7cf8-c9e6-d6864ea522ca@redhat.com \
    --to=thuth@redhat.com \
    --cc=alex.bennee@linaro.org \
    --cc=alistair@alistair23.me \
    --cc=david@gibson.dropbear.id.au \
    --cc=fam@euphon.net \
    --cc=groug@kaod.org \
    --cc=jiaxun.yang@flygoat.com \
    --cc=kvm@vger.kernel.org \
    --cc=kwolf@redhat.com \
    --cc=lvivier@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=philmd@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=viktor.prutyanov@phystech.edu \
    --cc=wainersm@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).