From: Daniel Henrique Barboza <danielhb413@gmail.com>
To: Nicholas Piggin <npiggin@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>,
qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
qemu-stable@nongnu.org
Subject: Re: [PATCH v2 2/4] target/ppc: Ensure stcx size matches larx
Date: Mon, 5 Jun 2023 10:42:07 -0300 [thread overview]
Message-ID: <5ca92901-08df-2ae2-3468-77c8ee36e35b@gmail.com> (raw)
In-Reply-To: <20230605025445.161932-2-npiggin@gmail.com>
On 6/4/23 23:54, Nicholas Piggin wrote:
> Differently-sized larx/stcx. pairs can succeed if the starting address
> matches. Add a check to require the size of stcx. exactly match the larx
> that established the reservation. Use the term "reserve_length" for this
> state, which matches the terminology used in the ISA.
>
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
Queued. Thanks,
Daniel
> v2:
> - Changed lqarx/stqcx. reservation size to 16 [Richard]
> - Changed name to reserve_length [Richard]
>
> target/ppc/cpu.h | 5 +++--
> target/ppc/cpu_init.c | 4 ++--
> target/ppc/translate.c | 9 +++++++++
> 3 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
> index 7959bfed0a..45d84ce06a 100644
> --- a/target/ppc/cpu.h
> +++ b/target/ppc/cpu.h
> @@ -1123,8 +1123,9 @@ struct CPUArchState {
> target_ulong ov32;
> target_ulong ca32;
>
> - target_ulong reserve_addr; /* Reservation address */
> - target_ulong reserve_val; /* Reservation value */
> + target_ulong reserve_addr; /* Reservation address */
> + target_ulong reserve_length; /* Reservation larx op size (bytes) */
> + target_ulong reserve_val; /* Reservation value */
> target_ulong reserve_val2;
>
> /* These are used in supervisor mode only */
> diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c
> index 944a74befe..c3dd7052a3 100644
> --- a/target/ppc/cpu_init.c
> +++ b/target/ppc/cpu_init.c
> @@ -7421,8 +7421,8 @@ void ppc_cpu_dump_state(CPUState *cs, FILE *f, int flags)
> }
> qemu_fprintf(f, " %c%c", a, env->crf[i] & 0x01 ? 'O' : ' ');
> }
> - qemu_fprintf(f, " ] RES " TARGET_FMT_lx "\n",
> - env->reserve_addr);
> + qemu_fprintf(f, " ] RES %03x@" TARGET_FMT_lx "\n",
> + (int)env->reserve_length, env->reserve_addr);
>
> if (flags & CPU_DUMP_FPU) {
> for (i = 0; i < 32; i++) {
> diff --git a/target/ppc/translate.c b/target/ppc/translate.c
> index 7a5bf1d820..538f757dec 100644
> --- a/target/ppc/translate.c
> +++ b/target/ppc/translate.c
> @@ -71,6 +71,7 @@ static TCGv cpu_cfar;
> #endif
> static TCGv cpu_xer, cpu_so, cpu_ov, cpu_ca, cpu_ov32, cpu_ca32;
> static TCGv cpu_reserve;
> +static TCGv cpu_reserve_length;
> static TCGv cpu_reserve_val;
> static TCGv cpu_reserve_val2;
> static TCGv cpu_fpscr;
> @@ -141,6 +142,10 @@ void ppc_translate_init(void)
> cpu_reserve = tcg_global_mem_new(cpu_env,
> offsetof(CPUPPCState, reserve_addr),
> "reserve_addr");
> + cpu_reserve_length = tcg_global_mem_new(cpu_env,
> + offsetof(CPUPPCState,
> + reserve_length),
> + "reserve_length");
> cpu_reserve_val = tcg_global_mem_new(cpu_env,
> offsetof(CPUPPCState, reserve_val),
> "reserve_val");
> @@ -3585,6 +3590,7 @@ static void gen_load_locked(DisasContext *ctx, MemOp memop)
> gen_addr_reg_index(ctx, t0);
> tcg_gen_qemu_ld_tl(gpr, t0, ctx->mem_idx, memop | MO_ALIGN);
> tcg_gen_mov_tl(cpu_reserve, t0);
> + tcg_gen_movi_tl(cpu_reserve_length, memop_size(memop));
> tcg_gen_mov_tl(cpu_reserve_val, gpr);
> tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ);
> }
> @@ -3816,6 +3822,7 @@ static void gen_conditional_store(DisasContext *ctx, MemOp memop)
> gen_set_access_type(ctx, ACCESS_RES);
> gen_addr_reg_index(ctx, t0);
> tcg_gen_brcond_tl(TCG_COND_NE, t0, cpu_reserve, l1);
> + tcg_gen_brcondi_tl(TCG_COND_NE, cpu_reserve_length, memop_size(memop), l1);
>
> t0 = tcg_temp_new();
> tcg_gen_atomic_cmpxchg_tl(t0, cpu_reserve, cpu_reserve_val,
> @@ -3882,6 +3889,7 @@ static void gen_lqarx(DisasContext *ctx)
> tcg_gen_extr_i128_i64(lo, hi, t16);
>
> tcg_gen_mov_tl(cpu_reserve, EA);
> + tcg_gen_movi_tl(cpu_reserve_length, 16);
> tcg_gen_st_tl(hi, cpu_env, offsetof(CPUPPCState, reserve_val));
> tcg_gen_st_tl(lo, cpu_env, offsetof(CPUPPCState, reserve_val2));
> }
> @@ -3907,6 +3915,7 @@ static void gen_stqcx_(DisasContext *ctx)
> gen_addr_reg_index(ctx, EA);
>
> tcg_gen_brcond_tl(TCG_COND_NE, EA, cpu_reserve, lab_fail);
> + tcg_gen_brcondi_tl(TCG_COND_NE, cpu_reserve_length, 16, lab_fail);
>
> cmp = tcg_temp_new_i128();
> val = tcg_temp_new_i128();
next prev parent reply other threads:[~2023-06-05 13:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-05 2:54 [PATCH v2 1/4] target/ppc: Fix lqarx to set cpu_reserve Nicholas Piggin
2023-06-05 2:54 ` [PATCH v2 2/4] target/ppc: Ensure stcx size matches larx Nicholas Piggin
2023-06-05 13:42 ` Daniel Henrique Barboza [this message]
2023-06-05 2:54 ` [PATCH v2 3/4] target/ppc: Remove larx/stcx. memory barrier semantics Nicholas Piggin
2023-06-05 13:42 ` Daniel Henrique Barboza
2023-06-05 2:54 ` [PATCH v2 4/4] target/ppc: Rework store conditional to avoid branch Nicholas Piggin
2023-06-05 13:42 ` Daniel Henrique Barboza
2023-06-05 3:09 ` [PATCH v2 1/4] target/ppc: Fix lqarx to set cpu_reserve Richard Henderson
2023-06-05 13:42 ` Daniel Henrique Barboza
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5ca92901-08df-2ae2-3468-77c8ee36e35b@gmail.com \
--to=danielhb413@gmail.com \
--cc=npiggin@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=qemu-stable@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).