From: Akihiko Odaki <akihiko.odaki@daynix.com>
To: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Cc: qemu-devel@nongnu.org, Jason Wang <jasowang@redhat.com>,
Dmitry Fleytman <dmitry.fleytman@gmail.com>,
"Michael S . Tsirkin" <mst@redhat.com>,
Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Subject: Re: [PATCH v2 3/9] igb: implement VFRE and VFTE registers
Date: Mon, 30 Jan 2023 23:19:57 +0900 [thread overview]
Message-ID: <5f5358e1-ee71-7c8f-8363-1de3373eeb7f@daynix.com> (raw)
In-Reply-To: <20230130132304.2347-4-sriram.yagnaraman@est.tech>
On 2023/01/30 22:22, Sriram Yagnaraman wrote:
> Also add checks for RXDCTL/TXDCTL queue enable bits
>
> Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
> ---
> hw/net/igb_core.c | 41 ++++++++++++++++++++++++++++++-----------
> hw/net/igb_regs.h | 4 +++-
> 2 files changed, 33 insertions(+), 12 deletions(-)
>
> diff --git a/hw/net/igb_core.c b/hw/net/igb_core.c
> index 9bd53cc25f..b8c01cb773 100644
> --- a/hw/net/igb_core.c
> +++ b/hw/net/igb_core.c
> @@ -778,6 +778,18 @@ igb_txdesc_writeback(IGBCore *core, dma_addr_t base,
> return igb_tx_wb_eic(core, txi->idx);
> }
>
> +static inline bool
> +igb_tx_enabled(IGBCore *core, const E1000E_RingInfo *txi)
> +{
> + bool vmdq = core->mac[MRQC] & 1;
> + uint16_t qn = txi->idx;
> + uint16_t vfn = qn % IGB_MAX_VM_POOLS;
Rename vfn to pool as you did in other places.
> +
> + return (core->mac[TCTL] & E1000_TCTL_EN) &&
> + (!vmdq || core->mac[VFTE] & BIT(vfn)) &&
> + (core->mac[TXDCTL0 + (qn * 16)] & E1000_TXDCTL_QUEUE_ENABLE);
> +}
> +
> static void
> igb_start_xmit(IGBCore *core, const IGB_TxRing *txr)
> {
> @@ -787,8 +799,7 @@ igb_start_xmit(IGBCore *core, const IGB_TxRing *txr)
> const E1000E_RingInfo *txi = txr->i;
> uint32_t eic = 0;
>
> - /* TODO: check if the queue itself is enabled too. */
> - if (!(core->mac[TCTL] & E1000_TCTL_EN)) {
> + if (!igb_tx_enabled(core, txi)) {
> trace_e1000e_tx_disabled();
> return;
> }
> @@ -1003,6 +1014,7 @@ static uint16_t igb_receive_assign(IGBCore *core, const struct eth_header *ehdr,
> queues = BIT(def_pl >> E1000_VT_CTL_DEFAULT_POOL_SHIFT);
> }
>
> + queues &= core->mac[VFRE];
> igb_rss_parse_packet(core, core->rx_pkt, external_tx != NULL, rss_info);
> if (rss_info->queue & 1) {
> queues <<= 8;
> @@ -1486,7 +1498,7 @@ igb_receive_internal(IGBCore *core, const struct iovec *iov, int iovcnt,
> static const int maximum_ethernet_hdr_len = (ETH_HLEN + 4);
>
> uint16_t queues = 0;
> - uint32_t n;
> + uint32_t n = 0;
> uint8_t min_buf[ETH_ZLEN];
> struct iovec min_iov;
> struct eth_header *ehdr;
> @@ -1566,26 +1578,22 @@ igb_receive_internal(IGBCore *core, const struct iovec *iov, int iovcnt,
> }
>
> igb_rx_ring_init(core, &rxr, i);
> -
> - trace_e1000e_rx_rss_dispatched_to_queue(rxr.i->idx);
> -
I think you have seen my earlier email, but just in case: please move
the fix included in a later patch to this.
> if (!igb_has_rxbufs(core, rxr.i, total_size)) {
> retval = 0;
> }
> }
>
> if (retval) {
> - n = E1000_ICR_RXT0;
> -
> igb_rx_fix_l4_csum(core, core->rx_pkt);
>
> for (i = 0; i < IGB_NUM_QUEUES; i++) {
> - if (!(queues & BIT(i))) {
> + if (!(queues & BIT(i)) ||
> + !(core->mac[E1000_RXDCTL(i) >> 2] & E1000_RXDCTL_QUEUE_ENABLE)) {
> continue;
> }
>
> igb_rx_ring_init(core, &rxr, i);
> -
> + trace_e1000e_rx_rss_dispatched_to_queue(rxr.i->idx);
> igb_write_packet_to_guest(core, core->rx_pkt, &rxr, &rss_info);
>
> /* Check if receive descriptor minimum threshold hit */
> @@ -1594,6 +1602,9 @@ igb_receive_internal(IGBCore *core, const struct iovec *iov, int iovcnt,
> }
>
> core->mac[EICR] |= igb_rx_wb_eic(core, rxr.i->idx);
> +
> + /* same as RXDW (rx descriptor written back)*/
> + n = E1000_ICR_RXT0;
Place the next patch, "igb: add ICR_RXDW" before this patch and remove
the comment; the comment will be redundant after that patch.
> }
>
> trace_e1000e_rx_written_to_guest(n);
> @@ -1981,9 +1992,16 @@ static void igb_set_vfmailbox(IGBCore *core, int index, uint32_t val)
>
> static void igb_vf_reset(IGBCore *core, uint16_t vfn)
> {
> + uint16_t qn0 = vfn;
> + uint16_t qn1 = vfn + IGB_MAX_VF_FUNCTIONS;
> +
> /* disable Rx and Tx for the VF*/
> - core->mac[VFTE] &= ~BIT(vfn);
> + core->mac[RXDCTL0 + (qn0 * 16)] &= ~E1000_RXDCTL_QUEUE_ENABLE;
> + core->mac[RXDCTL0 + (qn1 * 16)] &= ~E1000_RXDCTL_QUEUE_ENABLE;
> + core->mac[TXDCTL0 + (qn0 * 16)] &= ~E1000_TXDCTL_QUEUE_ENABLE;
> + core->mac[TXDCTL0 + (qn1 * 16)] &= ~E1000_TXDCTL_QUEUE_ENABLE;
> core->mac[VFRE] &= ~BIT(vfn);
> + core->mac[VFTE] &= ~BIT(vfn);
> /* indicate VF reset to PF */
> core->mac[VFLRE] |= BIT(vfn);
> /* VFLRE and mailbox use the same interrupt cause */
> @@ -3889,6 +3907,7 @@ igb_phy_reg_init[] = {
> static const uint32_t igb_mac_reg_init[] = {
> [LEDCTL] = 2 | (3 << 8) | BIT(15) | (6 << 16) | (7 << 24),
> [EEMNGCTL] = BIT(31),
> + [TXDCTL0] = E1000_TXDCTL_QUEUE_ENABLE,
> [RXDCTL0] = E1000_RXDCTL_QUEUE_ENABLE | (1 << 16),
> [RXDCTL1] = 1 << 16,
> [RXDCTL2] = 1 << 16,
> diff --git a/hw/net/igb_regs.h b/hw/net/igb_regs.h
> index ebf3e95023..c8ce5b1671 100644
> --- a/hw/net/igb_regs.h
> +++ b/hw/net/igb_regs.h
> @@ -147,6 +147,7 @@ union e1000_adv_rx_desc {
> #define IGB_MAX_TX_QUEUES 8
> #define IGB_MAX_VF_MC_ENTRIES 30
> #define IGB_MAX_VF_FUNCTIONS 8
> +#define IGB_MAX_VM_POOLS 8
> #define IGB_MAX_VFTA_ENTRIES 128
> #define IGB_82576_VF_DEV_ID 0x10CA
> #define IGB_I350_VF_DEV_ID 0x1520
> @@ -160,7 +161,8 @@ union e1000_adv_rx_desc {
> #define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
> #define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000
>
> -/* Additional Receive Descriptor Control definitions */
> +/* Additional RX/TX Descriptor Control definitions */
> +#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
> #define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
>
> /* Direct Cache Access (DCA) definitions */
next prev parent reply other threads:[~2023-01-30 14:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-30 13:22 [PATCH v2 0/9] igb: merge changes from <20221229190817.25500-1-sriram.yagnaraman@est.tech> Sriram Yagnaraman
2023-01-30 13:22 ` [PATCH v2 1/9] MAINTAINERS: Add Sriram Yagnaraman as a igb reviewer Sriram Yagnaraman
2023-01-30 13:22 ` [PATCH v2 2/9] igb: handle PF/VF reset properly Sriram Yagnaraman
2023-01-30 14:14 ` Akihiko Odaki
2023-01-30 13:22 ` [PATCH v2 3/9] igb: implement VFRE and VFTE registers Sriram Yagnaraman
2023-01-30 14:19 ` Akihiko Odaki [this message]
2023-01-30 14:23 ` Akihiko Odaki
2023-01-30 13:22 ` [PATCH v2 4/9] igb: add ICR_RXDW Sriram Yagnaraman
2023-01-30 13:23 ` [PATCH v2 5/9] igb: check oversized packets for VMDq Sriram Yagnaraman
2023-01-30 14:31 ` Akihiko Odaki
2023-01-30 13:23 ` [PATCH v2 6/9] igb: respect E1000_VMOLR_RSSE Sriram Yagnaraman
2023-01-30 13:23 ` [PATCH v2 7/9] igb: implement VF Tx and Rx stats Sriram Yagnaraman
2023-01-30 13:23 ` [PATCH v2 8/9] igb: respect VT_CTL ignore MAC field Sriram Yagnaraman
2023-01-30 13:23 ` [PATCH v2 9/9] igb: respect VMVIR and VMOLR for VLAN Sriram Yagnaraman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5f5358e1-ee71-7c8f-8363-1de3373eeb7f@daynix.com \
--to=akihiko.odaki@daynix.com \
--cc=dmitry.fleytman@gmail.com \
--cc=jasowang@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=sriram.yagnaraman@est.tech \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).