[PATCH v1 00/12] hw/arm/aspeed: Add AST1060 SoC and EVB support

[PATCH v1 00/12] hw/arm/aspeed: Add AST1060 SoC and EVB support

[Jamin Lin via]

v1:
  1. Add SFDP table for Winbond W25Q02JVM flash
  2. Add AST1060 SoC and EVB support
  3. Fix missing SPI IRQ connection causing DMA interrupt failure
  4. Fix the revision ID cannot be set in the SOC layer for AST2600 and AST1030

Jamin Lin (12):
  hw/arm/aspeed: Fix missing SPI IRQ connection causing DMA interrupt
    failure
  hw/block/m25p80: Add SFDP table for Winbond W25Q02JVM flash
  hw/misc/aspeed_scu: Fix the revision ID cannot be set in the SOC layer
    for AST2600 and AST1030
  hhw/misc/aspeed_scu: Add AST1060 A2 silicon revision definition
  hw/arm/aspeed_ast10x0: Add common init function for AST10x0 SoCs
  hw/arm/aspeed_ast10x0: Add common realize function for AST10x0 SoCs
  hw/arm/aspeed_ast10x0: Pass SoC name to common init for AST10x0 family
    reuse
  hw/arm/aspeed_ast10x0: Add AST1060 SoC support
  hw/arm/aspeed_ast10x0_evb: Add AST1060 EVB machine support
  tests/functional/arm/test_aspeed_ast1060: Add functional tests for
    Aspeed AST1060 SoC
  docs/system/arm/aspeed: Update Aspeed and 2700 family boards list
  docs/system/arm/aspeed: Update Aspeed MiniBMC section to include
    AST1060 PFR processor

 docs/system/arm/aspeed.rst                  |  28 ++-
 hw/block/m25p80_sfdp.h                      |   1 +
 include/hw/misc/aspeed_scu.h                |   1 +
 hw/arm/aspeed_ast10x0.c                     | 216 +++++++++++++-------
 hw/arm/aspeed_ast10x0_evb.c                 |  23 +++
 hw/arm/aspeed_ast2600.c                     |   2 +
 hw/arm/aspeed_ast27x0.c                     |   2 +
 hw/block/m25p80.c                           |   2 +
 hw/block/m25p80_sfdp.c                      |  36 ++++
 hw/misc/aspeed_scu.c                        |   5 +-
 tests/functional/arm/meson.build            |   1 +
 tests/functional/arm/test_aspeed_ast1060.py |  52 +++++
 12 files changed, 287 insertions(+), 82 deletions(-)
 create mode 100644 tests/functional/arm/test_aspeed_ast1060.py

-- 
2.43.0

[PATCH v1 01/12] hw/arm/aspeed: Fix missing SPI IRQ connection causing DMA interrupt failure

[Jamin Lin via]

It did not connect SPI IRQ to the Interrupt Controller, so even the SPI
model raised the IRQ, the interrupt was not received. The CPU therefore
did not trigger an interrupt via the controller, and the firmware never
received the interrupt.

Fixes: 356b230ed13889e09d087a96498887de695df17e ("aspeed/soc: Add AST1030 support")
Fixes: f25c0ae1079dc0b9de02676eb3e3949a09df9f41 ("aspeed/soc: Add AST2600 support")
Fixes: 5dd883ab0635c9f715c77cc32622e458a0724581 ("aspeed/soc: Add AST2700 support")
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/arm/aspeed_ast10x0.c | 2 ++
 hw/arm/aspeed_ast2600.c | 2 ++
 hw/arm/aspeed_ast27x0.c | 2 ++
 3 files changed, 6 insertions(+)

diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c
index 7f49c13391..ca487774ae 100644
--- a/hw/arm/aspeed_ast10x0.c
+++ b/hw/arm/aspeed_ast10x0.c
@@ -372,6 +372,8 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
                         sc->memmap[ASPEED_DEV_SPI1 + i]);
         aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]), 1,
                         ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+                           aspeed_soc_ast1030_get_irq(s, ASPEED_DEV_SPI1 + i));
     }
 
     /* Secure Boot Controller */
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index 498d1ecc07..4c5a42ea17 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -557,6 +557,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
                         sc->memmap[ASPEED_DEV_SPI1 + i]);
         aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]), 1,
                         ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+                           aspeed_soc_ast2600_get_irq(s, ASPEED_DEV_SPI1 + i));
     }
 
     /* EHCI */
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index c484bcd4e2..e02a674b13 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -831,6 +831,8 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
                         sc->memmap[ASPEED_DEV_SPI0 + i]);
         aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]), 1,
                         ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+                           aspeed_soc_ast2700_get_irq(s, ASPEED_DEV_SPI0 + i));
     }
 
     /* EHCI */
-- 
2.43.0

[PATCH v1 02/12] hw/block/m25p80: Add SFDP table for Winbond W25Q02JVM flash

[Jamin Lin via]

Add the SFDP data table for Winbond W25Q02JVM flash device. The table
was generated under Linux kernel by dumping the SFDP content using
the following command:

```
hexdump -v -e '8/1 "0x%02x, " "\n"' \
    /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
```

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/block/m25p80_sfdp.h |  1 +
 hw/block/m25p80.c      |  2 ++
 hw/block/m25p80_sfdp.c | 36 ++++++++++++++++++++++++++++++++++++
 3 files changed, 39 insertions(+)

diff --git a/hw/block/m25p80_sfdp.h b/hw/block/m25p80_sfdp.h
index 35785686a0..c1e532de5a 100644
--- a/hw/block/m25p80_sfdp.h
+++ b/hw/block/m25p80_sfdp.h
@@ -27,6 +27,7 @@ uint8_t m25p80_sfdp_w25q256(uint32_t addr);
 uint8_t m25p80_sfdp_w25q512jv(uint32_t addr);
 uint8_t m25p80_sfdp_w25q80bl(uint32_t addr);
 uint8_t m25p80_sfdp_w25q01jvq(uint32_t addr);
+uint8_t m25p80_sfdp_w25q02jvm(uint32_t addr);
 
 uint8_t m25p80_sfdp_is25wp256(uint32_t addr);
 
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index a5336d92ff..338e17bf1d 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -364,6 +364,8 @@ static const FlashPartInfo known_devices[] = {
       .sfdp_read = m25p80_sfdp_w25q512jv },
     { INFO("w25q01jvq",   0xef4021,      0,  64 << 10, 2048, ER_4K),
       .sfdp_read = m25p80_sfdp_w25q01jvq },
+    { INFO("w25q02jvm",   0xef7022,      0,  64 << 10, 4096, ER_4K),
+      .sfdp_read = m25p80_sfdp_w25q02jvm },
 
     /* Microchip */
     { INFO("25csm04",      0x29cc00,      0x100,  64 << 10,  8, 0) },
diff --git a/hw/block/m25p80_sfdp.c b/hw/block/m25p80_sfdp.c
index a03a291a09..87878c2bf0 100644
--- a/hw/block/m25p80_sfdp.c
+++ b/hw/block/m25p80_sfdp.c
@@ -440,6 +440,42 @@ static const uint8_t sfdp_w25q80bl[] = {
 };
 define_sfdp_read(w25q80bl);
 
+static const uint8_t sfdp_w25q02jvm[] = {
+    0x53, 0x46, 0x44, 0x50, 0x06, 0x01, 0x01, 0xff,
+    0x00, 0x06, 0x01, 0x10, 0x80, 0x00, 0x00, 0xff,
+    0x84, 0x00, 0x01, 0x02, 0xd0, 0x00, 0x00, 0xff,
+    0x03, 0x00, 0x01, 0x02, 0xf0, 0x00, 0x00, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xe5, 0x20, 0xfb, 0xff, 0xff, 0xff, 0xff, 0x7f,
+    0x44, 0xeb, 0x08, 0x6b, 0x08, 0x3b, 0x42, 0xbb,
+    0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00,
+    0xff, 0xff, 0x40, 0xeb, 0x0c, 0x20, 0x0f, 0x52,
+    0x10, 0xd8, 0x00, 0x00, 0x36, 0x02, 0xa6, 0x00,
+    0x82, 0xea, 0x14, 0xe2, 0xe9, 0x63, 0x76, 0x33,
+    0x7a, 0x75, 0x7a, 0x75, 0xf7, 0xa2, 0xd5, 0x5c,
+    0x19, 0xf7, 0x4d, 0xff, 0xe9, 0x70, 0xf9, 0xa5,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0x0a, 0xf0, 0xff, 0x21, 0xff, 0xdc, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+};
+define_sfdp_read(w25q02jvm);
+
 /*
  * Integrated Silicon Solution (ISSI)
  */
-- 
2.43.0

[PATCH v1 03/12] hw/misc/aspeed_scu: Fix the revision ID cannot be set in the SOC layer for AST2600 and AST1030

[Jamin Lin via]

According to the design of the AST2600, it has a Silicon Revision ID
Register, specifically SCU004 and SCU014, to set the Revision ID for the
AST2600. For the AST2600 A3, SCU004 is set to 0x05030303 and SCU014 is
set to 0x05030303.

In the "aspeed_ast2600_scu_reset" function, the hardcoded value
"AST2600_A3_SILICON_REV" was used for SCU004, while "s->silicon_rev" was
used for SCU014. The value of "s->silicon_rev" is set by the SoC layer
via the "silicon-rev" property. This patch aligns both SCU004 and SCU014
to use "s->silicon_rev" for consistency and flexibility.

Similarly, the "aspeed_ast1030_scu_reset" function also used a fixed
revision constant ("AST1030_A1_SILICON_REV"). This change updates it to
use the same "s->silicon_rev" property, ensuring that both SoCs follow
a consistent and configurable revision handling mechanism.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/misc/aspeed_scu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
index a0ab5eed8f..1f996d5398 100644
--- a/hw/misc/aspeed_scu.c
+++ b/hw/misc/aspeed_scu.c
@@ -841,7 +841,7 @@ static void aspeed_ast2600_scu_reset(DeviceState *dev)
      * of actual revision. QEMU and Linux only support A1 onwards so this is
      * sufficient.
      */
-    s->regs[AST2600_SILICON_REV] = AST2600_A3_SILICON_REV;
+    s->regs[AST2600_SILICON_REV] = s->silicon_rev;
     s->regs[AST2600_SILICON_REV2] = s->silicon_rev;
     s->regs[AST2600_HW_STRAP1] = s->hw_strap1;
     s->regs[AST2600_HW_STRAP2] = s->hw_strap2;
@@ -1137,7 +1137,7 @@ static void aspeed_ast1030_scu_reset(DeviceState *dev)
 
     memcpy(s->regs, asc->resets, asc->nr_regs * 4);
 
-    s->regs[AST2600_SILICON_REV] = AST1030_A1_SILICON_REV;
+    s->regs[AST2600_SILICON_REV] = s->silicon_rev;
     s->regs[AST2600_SILICON_REV2] = s->silicon_rev;
     s->regs[AST2600_HW_STRAP1] = s->hw_strap1;
     s->regs[AST2600_HW_STRAP2] = s->hw_strap2;
-- 
2.43.0

[PATCH v1 04/12] hhw/misc/aspeed_scu: Add AST1060 A2 silicon revision definition

[Jamin Lin via]

Add a new silicon revision constant AST1060_A2_SILICON_REV for the
AST1060 SoC. This allows the SCU model and related SoC layers to
identify and handle AST1060 A2 revision properly in the same way as
other Aspeed SoC families.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 include/hw/misc/aspeed_scu.h | 1 +
 hw/misc/aspeed_scu.c         | 1 +
 2 files changed, 2 insertions(+)

diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h
index 684b48b722..76ef8dc592 100644
--- a/include/hw/misc/aspeed_scu.h
+++ b/include/hw/misc/aspeed_scu.h
@@ -51,6 +51,7 @@ struct AspeedSCUState {
 #define AST2600_A3_SILICON_REV   0x05030303U
 #define AST1030_A0_SILICON_REV   0x80000000U
 #define AST1030_A1_SILICON_REV   0x80010000U
+#define AST1060_A2_SILICON_REV   0xA0030000U
 #define AST2700_A0_SILICON_REV   0x06000103U
 #define AST2720_A0_SILICON_REV   0x06000203U
 #define AST2750_A0_SILICON_REV   0x06000003U
diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
index 1f996d5398..300571256a 100644
--- a/hw/misc/aspeed_scu.c
+++ b/hw/misc/aspeed_scu.c
@@ -565,6 +565,7 @@ static uint32_t aspeed_silicon_revs[] = {
     AST2600_A3_SILICON_REV,
     AST1030_A0_SILICON_REV,
     AST1030_A1_SILICON_REV,
+    AST1060_A2_SILICON_REV,
     AST2700_A0_SILICON_REV,
     AST2720_A0_SILICON_REV,
     AST2750_A0_SILICON_REV,
-- 
2.43.0

[PATCH v1 05/12] hw/arm/aspeed_ast10x0: Add common init function for AST10x0 SoCs

[Jamin Lin via]

Introduce a new common initialization function
aspeed_soc_ast10x0_init() for AST10x0 series SoCs. This separates the
shared initialization logic from the AST1030-specific part, allowing
reuse by future SoCs such as AST1060.

The AST1060 does not include the LPC and PECI models, so the common
initializer is used for all shared modules, while
aspeed_soc_ast1030_init() adds initialization of LPC and PECI, which
are unique to AST1030.

This refactor improves code reuse and prepares the codebase for
supporting the AST1060 platform.

No functional changes.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/arm/aspeed_ast10x0.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c
index ca487774ae..5941ebe00c 100644
--- a/hw/arm/aspeed_ast10x0.c
+++ b/hw/arm/aspeed_ast10x0.c
@@ -107,7 +107,7 @@ static qemu_irq aspeed_soc_ast1030_get_irq(AspeedSoCState *s, int dev)
     return qdev_get_gpio_in(DEVICE(&a->armv7m), sc->irqmap[dev]);
 }
 
-static void aspeed_soc_ast1030_init(Object *obj)
+static void aspeed_soc_ast10x0_init(Object *obj)
 {
     Aspeed10x0SoCState *a = ASPEED10X0_SOC(obj);
     AspeedSoCState *s = ASPEED_SOC(obj);
@@ -150,10 +150,6 @@ static void aspeed_soc_ast1030_init(Object *obj)
         object_initialize_child(obj, "spi[*]", &s->spi[i], typename);
     }
 
-    object_initialize_child(obj, "lpc", &s->lpc, TYPE_ASPEED_LPC);
-
-    object_initialize_child(obj, "peci", &s->peci, TYPE_ASPEED_PECI);
-
     object_initialize_child(obj, "sbc", &s->sbc, TYPE_ASPEED_AST10X0_SBC);
 
     for (i = 0; i < sc->wdts_num; i++) {
@@ -185,6 +181,15 @@ static void aspeed_soc_ast1030_init(Object *obj)
                             TYPE_UNIMPLEMENTED_DEVICE);
 }
 
+static void aspeed_soc_ast1030_init(Object *obj)
+{
+    AspeedSoCState *s = ASPEED_SOC(obj);
+
+    aspeed_soc_ast10x0_init(obj);
+    object_initialize_child(obj, "lpc", &s->lpc, TYPE_ASPEED_LPC);
+    object_initialize_child(obj, "peci", &s->peci, TYPE_ASPEED_PECI);
+}
+
 static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
 {
     Aspeed10x0SoCState *a = ASPEED10X0_SOC(dev_soc);
-- 
2.43.0

[PATCH v1 06/12] hw/arm/aspeed_ast10x0: Add common realize function for AST10x0 SoCs

[Jamin Lin via]

Introduce a new common realize function aspeed_soc_ast10x0_realize()
for AST10x0 series SoCs. The shared initialization and realization logic
is now placed in this common function to improve code reuse and reduce
duplication between different SoCs in the same family.

The AST1030 realization function aspeed_soc_ast1030_realize() is
updated to call the new common routine and then perform realization of
its own specific devices such as LPC and PECI, which are not present on
future SoCs like AST1060.

This refactor simplifies maintenance and prepares the framework for
adding AST1060 support.

No functional changes.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/arm/aspeed_ast10x0.c | 128 ++++++++++++++++++++++------------------
 1 file changed, 70 insertions(+), 58 deletions(-)

diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c
index 5941ebe00c..5bbe16af24 100644
--- a/hw/arm/aspeed_ast10x0.c
+++ b/hw/arm/aspeed_ast10x0.c
@@ -190,10 +190,9 @@ static void aspeed_soc_ast1030_init(Object *obj)
     object_initialize_child(obj, "peci", &s->peci, TYPE_ASPEED_PECI);
 }
 
-static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
+static bool aspeed_soc_ast10x0_realize(Aspeed10x0SoCState *a, Error **errp)
 {
-    Aspeed10x0SoCState *a = ASPEED10X0_SOC(dev_soc);
-    AspeedSoCState *s = ASPEED_SOC(dev_soc);
+    AspeedSoCState *s = ASPEED_SOC(a);
     AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
     DeviceState *armv7m;
     Error *err = NULL;
@@ -203,7 +202,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
 
     if (!clock_has_source(s->sysclk)) {
         error_setg(errp, "sysclk clock must be wired up by the board code");
-        return;
+        return false;
     }
 
     /* General I/O memory space to catch all unimplemented device */
@@ -216,7 +215,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
                                   "aspeed.sbc", sc->memmap[ASPEED_DEV_SBC],
                                   0x40000);
 
-    /* AST1030 CPU Core */
+    /* AST10x0 CPU Core */
     armv7m = DEVICE(&a->armv7m);
     qdev_prop_set_uint32(armv7m, "num-irq", 256);
     qdev_prop_set_string(armv7m, "cpu-type",
@@ -232,7 +231,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
     memory_region_init_ram(&s->sram, OBJECT(s), sram_name, sc->sram_size, &err);
     if (err != NULL) {
         error_propagate(errp, err);
-        return;
+        return false;
     }
     memory_region_add_subregion(s->memory,
                                 sc->memmap[ASPEED_DEV_SRAM],
@@ -241,14 +240,14 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
                            sc->secsram_size, &err);
     if (err != NULL) {
         error_propagate(errp, err);
-        return;
+        return false;
     }
     memory_region_add_subregion(s->memory, sc->memmap[ASPEED_DEV_SECSRAM],
                                 &s->secsram);
 
     /* SCU */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
-        return;
+        return false;
     }
     aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->scu), 0,
                     sc->memmap[ASPEED_DEV_SCU]);
@@ -258,7 +257,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
     object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(&s->sram),
                              &error_abort);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c), errp)) {
-        return;
+        return false;
     }
     aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->i2c), 0,
                     sc->memmap[ASPEED_DEV_I2C]);
@@ -271,7 +270,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
 
     /* I3C */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->i3c), errp)) {
-        return;
+        return false;
     }
     aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->i3c), 0,
                     sc->memmap[ASPEED_DEV_I3C]);
@@ -282,50 +281,11 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->i3c.devices[i]), 0, irq);
     }
 
-    /* PECI */
-    if (!sysbus_realize(SYS_BUS_DEVICE(&s->peci), errp)) {
-        return;
-    }
-    aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->peci), 0,
-                    sc->memmap[ASPEED_DEV_PECI]);
-    sysbus_connect_irq(SYS_BUS_DEVICE(&s->peci), 0,
-                       aspeed_soc_ast1030_get_irq(s, ASPEED_DEV_PECI));
-
-    /* LPC */
-    if (!sysbus_realize(SYS_BUS_DEVICE(&s->lpc), errp)) {
-        return;
-    }
-    aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->lpc), 0,
-                    sc->memmap[ASPEED_DEV_LPC]);
-
-    /* Connect the LPC IRQ to the GIC. It is otherwise unused. */
-    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 0,
-                       aspeed_soc_ast1030_get_irq(s, ASPEED_DEV_LPC));
-
-    /*
-     * On the AST1030 LPC subdevice IRQs are connected straight to the GIC.
-     */
-    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_1,
-                       qdev_get_gpio_in(DEVICE(&a->armv7m),
-                                sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_1));
-
-    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_2,
-                       qdev_get_gpio_in(DEVICE(&a->armv7m),
-                                sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_2));
-
-    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_3,
-                       qdev_get_gpio_in(DEVICE(&a->armv7m),
-                                sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_3));
-
-    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_4,
-                       qdev_get_gpio_in(DEVICE(&a->armv7m),
-                                sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_4));
-
     /* UART */
     for (i = 0, uart = sc->uarts_base; i < sc->uarts_num; i++, uart++) {
         if (!aspeed_soc_uart_realize(s->memory, &s->uart[i],
                                      sc->memmap[uart], errp)) {
-            return;
+            return false;
         }
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
                            aspeed_soc_ast1030_get_irq(s, uart));
@@ -335,7 +295,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
     object_property_set_link(OBJECT(&s->timerctrl), "scu", OBJECT(&s->scu),
                              &error_abort);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->timerctrl), errp)) {
-        return;
+        return false;
     }
     aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->timerctrl), 0,
                     sc->memmap[ASPEED_DEV_TIMER1]);
@@ -346,7 +306,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
 
     /* ADC */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->adc), errp)) {
-        return;
+        return false;
     }
     aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->adc), 0,
                     sc->memmap[ASPEED_DEV_ADC]);
@@ -357,7 +317,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
     object_property_set_link(OBJECT(&s->fmc), "dram", OBJECT(&s->sram),
             &error_abort);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->fmc), errp)) {
-        return;
+        return false;
     }
     aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->fmc), 0,
                     sc->memmap[ASPEED_DEV_FMC]);
@@ -371,7 +331,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
         object_property_set_link(OBJECT(&s->spi[i]), "dram",
                                  OBJECT(&s->sram), &error_abort);
         if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
-            return;
+            return false;
         }
         aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]), 0,
                         sc->memmap[ASPEED_DEV_SPI1 + i]);
@@ -383,7 +343,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
 
     /* Secure Boot Controller */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->sbc), errp)) {
-        return;
+        return false;
     }
     aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->sbc), 0,
                     sc->memmap[ASPEED_DEV_SBC]);
@@ -392,7 +352,7 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
     object_property_set_link(OBJECT(&s->hace), "dram", OBJECT(&s->sram),
                              &error_abort);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->hace), errp)) {
-        return;
+        return false;
     }
     aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->hace), 0,
                     sc->memmap[ASPEED_DEV_HACE]);
@@ -407,14 +367,14 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
         object_property_set_link(OBJECT(&s->wdt[i]), "scu", OBJECT(&s->scu),
                                  &error_abort);
         if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
-            return;
+            return false;
         }
         aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->wdt[i]), 0, wdt_offset);
     }
 
     /* GPIO */
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
-        return;
+        return false;
     }
     aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->gpio), 0,
                     sc->memmap[ASPEED_DEV_GPIO]);
@@ -442,6 +402,58 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
     aspeed_mmio_map_unimplemented(s->memory, SYS_BUS_DEVICE(&s->jtag[1]),
                                   "aspeed.jtag",
                                   sc->memmap[ASPEED_DEV_JTAG1], 0x20);
+
+    return true;
+}
+
+static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
+{
+    Aspeed10x0SoCState *a = ASPEED10X0_SOC(dev_soc);
+    AspeedSoCState *s = ASPEED_SOC(dev_soc);
+    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
+
+    if (!aspeed_soc_ast10x0_realize(a, errp)) {
+        return;
+    }
+
+    /* PECI */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->peci), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->peci), 0,
+                    sc->memmap[ASPEED_DEV_PECI]);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->peci), 0,
+                       aspeed_soc_ast1030_get_irq(s, ASPEED_DEV_PECI));
+
+    /* LPC */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->lpc), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->lpc), 0,
+                    sc->memmap[ASPEED_DEV_LPC]);
+
+    /* Connect the LPC IRQ to the GIC. It is otherwise unused. */
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 0,
+                       aspeed_soc_ast1030_get_irq(s, ASPEED_DEV_LPC));
+
+    /*
+     * On the AST1030 LPC subdevice IRQs are connected straight to the GIC.
+     */
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_1,
+                       qdev_get_gpio_in(DEVICE(&a->armv7m),
+                                sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_1));
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_2,
+                       qdev_get_gpio_in(DEVICE(&a->armv7m),
+                                sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_2));
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_3,
+                       qdev_get_gpio_in(DEVICE(&a->armv7m),
+                                sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_3));
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_4,
+                       qdev_get_gpio_in(DEVICE(&a->armv7m),
+                                sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_4));
 }
 
 static void aspeed_soc_ast1030_class_init(ObjectClass *klass, const void *data)
-- 
2.43.0

[PATCH v1 07/12] hw/arm/aspeed_ast10x0: Pass SoC name to common init for AST10x0 family reuse

[Jamin Lin via]

Refactor the AST10x0 common initialization to accept a socname
parameter.

The AST1030 model can be reused by AST1060 since they share most of the
same controllers. This approach allows AST1060 to leverage the existing
AST1030 initialization flow while keeping separate SoC-specific init
functions for components that differ.

This prepares the framework for AST1060 support, allowing it to reuse
AST1030 device models and initialization flow without code duplication.

No functional changes.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/arm/aspeed_ast10x0.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c
index 5bbe16af24..c85c21b149 100644
--- a/hw/arm/aspeed_ast10x0.c
+++ b/hw/arm/aspeed_ast10x0.c
@@ -107,19 +107,14 @@ static qemu_irq aspeed_soc_ast1030_get_irq(AspeedSoCState *s, int dev)
     return qdev_get_gpio_in(DEVICE(&a->armv7m), sc->irqmap[dev]);
 }
 
-static void aspeed_soc_ast10x0_init(Object *obj)
+static void aspeed_soc_ast10x0_init(Object *obj, const char *socname)
 {
     Aspeed10x0SoCState *a = ASPEED10X0_SOC(obj);
     AspeedSoCState *s = ASPEED_SOC(obj);
     AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
-    char socname[8];
     char typename[64];
     int i;
 
-    if (sscanf(object_get_typename(obj), "%7s", socname) != 1) {
-        g_assert_not_reached();
-    }
-
     object_initialize_child(obj, "armv7m", &a->armv7m, TYPE_ARMV7M);
 
     s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0);
@@ -184,8 +179,13 @@ static void aspeed_soc_ast10x0_init(Object *obj)
 static void aspeed_soc_ast1030_init(Object *obj)
 {
     AspeedSoCState *s = ASPEED_SOC(obj);
+    char socname[8];
+
+    if (sscanf(object_get_typename(obj), "%7s", socname) != 1) {
+        g_assert_not_reached();
+    }
 
-    aspeed_soc_ast10x0_init(obj);
+    aspeed_soc_ast10x0_init(obj, socname);
     object_initialize_child(obj, "lpc", &s->lpc, TYPE_ASPEED_LPC);
     object_initialize_child(obj, "peci", &s->peci, TYPE_ASPEED_PECI);
 }
-- 
2.43.0

[PATCH v1 08/12] hw/arm/aspeed_ast10x0: Add AST1060 SoC support

[Jamin Lin via]

Add initial support for the Aspeed AST1060 SoC. The AST1060 reuses most
of the AST1030 peripheral device models, as the two SoCs share nearly
the same controllers including WDT, SCU, TIMER, HACE, ADC, I2C, FMC,
and SPI.

A new common initialization and realization framework (ast10x0_init
and ast10x0_realize) is leveraged so AST1060 can instantiate the
existing AST1030 models without redefining duplicate device types.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/arm/aspeed_ast10x0.c | 61 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)

diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c
index c85c21b149..17f5285d85 100644
--- a/hw/arm/aspeed_ast10x0.c
+++ b/hw/arm/aspeed_ast10x0.c
@@ -190,6 +190,25 @@ static void aspeed_soc_ast1030_init(Object *obj)
     object_initialize_child(obj, "peci", &s->peci, TYPE_ASPEED_PECI);
 }
 
+static void aspeed_soc_ast1060_init(Object *obj)
+{
+    char socname[8] = "ast1030";
+
+    /*
+     * The AST1060 SoC reuses the AST1030 device models. Since all peripheral
+     * models (e.g. WDT, SCU, TIMER, HACE, ADC, I2C, FMC, SPI) defined for
+     * AST1030 are compatible with AST1060, we simply reuse the existing
+     * AST1030 models for AST1060.
+     *
+     * To simplify the implementation, AST1060 sets its socname to that of
+     * AST1030, avoiding the need to create a full set of new
+     * TYPE_ASPEED_1060_XXX device definitions. This allows the same
+     * TYPE_ASPEED_1030_WDT and other models to be instantiated for both
+     * SoCs.
+     */
+    aspeed_soc_ast10x0_init(obj, socname);
+}
+
 static bool aspeed_soc_ast10x0_realize(Aspeed10x0SoCState *a, Error **errp)
 {
     AspeedSoCState *s = ASPEED_SOC(a);
@@ -456,6 +475,15 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
                                 sc->irqmap[ASPEED_DEV_KCS] + aspeed_lpc_kcs_4));
 }
 
+static void aspeed_soc_ast1060_realize(DeviceState *dev_soc, Error **errp)
+{
+    Aspeed10x0SoCState *a = ASPEED10X0_SOC(dev_soc);
+
+    if (!aspeed_soc_ast10x0_realize(a, errp)) {
+        return;
+    }
+}
+
 static void aspeed_soc_ast1030_class_init(ObjectClass *klass, const void *data)
 {
     static const char * const valid_cpu_types[] = {
@@ -484,6 +512,32 @@ static void aspeed_soc_ast1030_class_init(ObjectClass *klass, const void *data)
     sc->num_cpus = 1;
 }
 
+static void aspeed_soc_ast1060_class_init(ObjectClass *klass, const void *data)
+{
+    static const char * const valid_cpu_types[] = {
+        ARM_CPU_TYPE_NAME("cortex-m4"), /* TODO cortex-m4f */
+        NULL
+    };
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    AspeedSoCClass *sc = ASPEED_SOC_CLASS(dc);
+
+    /* Reason: The Aspeed SoC can only be instantiated from a board */
+    dc->user_creatable = false;
+    dc->realize = aspeed_soc_ast1060_realize;
+
+    sc->valid_cpu_types = valid_cpu_types;
+    sc->silicon_rev = AST1060_A2_SILICON_REV;
+    sc->sram_size = 0xc0000;
+    sc->secsram_size = 0x40000; /* 256 * KiB */
+    sc->spis_num = 2;
+    sc->wdts_num = 4;
+    sc->uarts_num = 1;
+    sc->uarts_base = ASPEED_DEV_UART5;
+    sc->irqmap = aspeed_soc_ast1030_irqmap;
+    sc->memmap = aspeed_soc_ast1030_memmap;
+    sc->num_cpus = 1;
+}
+
 static const TypeInfo aspeed_soc_ast10x0_types[] = {
     {
         .name           = TYPE_ASPEED10X0_SOC,
@@ -495,7 +549,12 @@ static const TypeInfo aspeed_soc_ast10x0_types[] = {
         .parent         = TYPE_ASPEED10X0_SOC,
         .instance_init  = aspeed_soc_ast1030_init,
         .class_init     = aspeed_soc_ast1030_class_init,
-    },
+    }, {
+        .name           = "ast1060-a2",
+        .parent         = TYPE_ASPEED10X0_SOC,
+        .instance_init  = aspeed_soc_ast1060_init,
+        .class_init     = aspeed_soc_ast1060_class_init,
+    }
 };
 
 DEFINE_TYPES(aspeed_soc_ast10x0_types)
-- 
2.43.0

[PATCH v1 09/12] hw/arm/aspeed_ast10x0_evb: Add AST1060 EVB machine support

[Jamin Lin via]

Add a new machine definition ast1060-evb to support the Aspeed AST1060
evaluation board. The new EVB reuses the same MiniBMC framework used by
AST1030, as both SoCs share the same core peripherals and controller
designs.

The AST1060 EVB machine initializes the ast1060-a2 SoC and sets the
FMC and SPI flash models (w25q80bl and w25q02jvm) for simulation.
This enables QEMU to boot and emulate firmware images for AST1060-based
platforms.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/arm/aspeed_ast10x0_evb.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/hw/arm/aspeed_ast10x0_evb.c b/hw/arm/aspeed_ast10x0_evb.c
index 7af2a77865..a01385b543 100644
--- a/hw/arm/aspeed_ast10x0_evb.c
+++ b/hw/arm/aspeed_ast10x0_evb.c
@@ -96,12 +96,35 @@ static void aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc,
     aspeed_machine_class_init_cpus_defaults(mc);
 }
 
+static void aspeed_minibmc_machine_ast1060_evb_class_init(ObjectClass *oc,
+                                                          const void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+    mc->desc = "Aspeed AST1060 PFR (Cortex-M4)";
+    amc->soc_name = "ast1060-a2";
+    amc->hw_strap1 = 0;
+    amc->hw_strap2 = 0;
+    mc->init = aspeed_minibmc_machine_init;
+    amc->fmc_model = "w25q80bl";
+    amc->spi_model = "w25q02jvm";
+    amc->num_cs = 2;
+    amc->macs_mask = 0;
+    aspeed_machine_class_init_cpus_defaults(mc);
+}
+
 static const TypeInfo aspeed_ast10x0_evb_types[] = {
     {
         .name           = MACHINE_TYPE_NAME("ast1030-evb"),
         .parent         = TYPE_ASPEED_MACHINE,
         .class_init     = aspeed_minibmc_machine_ast1030_evb_class_init,
         .interfaces     = arm_machine_interfaces,
+    }, {
+        .name           = MACHINE_TYPE_NAME("ast1060-evb"),
+        .parent         = TYPE_ASPEED_MACHINE,
+        .class_init     = aspeed_minibmc_machine_ast1060_evb_class_init,
+        .interfaces     = arm_machine_interfaces,
     }
 };
 
-- 
2.43.0

[PATCH v1 10/12] tests/functional/arm/test_aspeed_ast1060: Add functional tests for Aspeed AST1060 SoC

[Jamin Lin via]

Add functional tests for the Aspeed AST1060 SoC and its evaluation board.
The new test test_aspeed_ast1060.py validates booting the AST1060 EVB
machine using the Zephyr OS and ASPEED PROT application (ast1060_prot_v03.02.tgz)
and ensures basic console functionality.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 tests/functional/arm/meson.build            |  1 +
 tests/functional/arm/test_aspeed_ast1060.py | 52 +++++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 tests/functional/arm/test_aspeed_ast1060.py

diff --git a/tests/functional/arm/meson.build b/tests/functional/arm/meson.build
index d1ed076a6a..1762a49604 100644
--- a/tests/functional/arm/meson.build
+++ b/tests/functional/arm/meson.build
@@ -28,6 +28,7 @@ tests_arm_system_quick = [
 
 tests_arm_system_thorough = [
   'aspeed_ast1030',
+  'aspeed_ast1060',
   'aspeed_palmetto',
   'aspeed_romulus',
   'aspeed_witherspoon',
diff --git a/tests/functional/arm/test_aspeed_ast1060.py b/tests/functional/arm/test_aspeed_ast1060.py
new file mode 100644
index 0000000000..034efa5342
--- /dev/null
+++ b/tests/functional/arm/test_aspeed_ast1060.py
@@ -0,0 +1,52 @@
+#!/usr/bin/env python3
+#
+# Functional test that boots the ASPEED SoCs with firmware
+#
+# Copyright (C) 2025 ASPEED Technology Inc
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from aspeed import AspeedTest
+from qemu_test import Asset, exec_command_and_wait_for_pattern
+
+
+class AST1060Machine(AspeedTest):
+    ASSET_ASPEED_AST1060_PROT_3_02 = Asset(
+        ('https://github.com/AspeedTech-BMC'
+         '/aspeed-zephyr-project/releases/download/v03.02'
+         '/ast1060_prot_v03.02.tgz'),
+         'dd5f1adc935316ddd1906506a02e15567bd7290657b52320f1a225564cc175bd')
+
+    def test_arm_ast1060_prot_3_02(self):
+        self.set_machine('ast1060-evb')
+
+        kernel_name = "ast1060_prot/zephyr.bin"
+        kernel_file = self.archive_extract(
+            self.ASSET_ASPEED_AST1060_PROT_3_02, member=kernel_name)
+
+        self.vm.set_console()
+        self.vm.add_args('-kernel', kernel_file, '-nographic')
+        self.vm.launch()
+        self.wait_for_console_pattern("Booting Zephyr OS")
+        exec_command_and_wait_for_pattern(self, "help",
+                                          "Available commands")
+
+    def test_arm_ast1060_otp_blockdev_device(self):
+        self.vm.set_machine("ast1060-evb")
+
+        kernel_name = "ast1060_prot/zephyr.bin"
+        kernel_file = self.archive_extract(self.ASSET_ASPEED_AST1060_PROT_3_02,
+                                           member=kernel_name)
+        otp_img = self.generate_otpmem_image()
+
+        self.vm.set_console()
+        self.vm.add_args(
+            "-kernel", kernel_file,
+            "-blockdev", f"driver=file,filename={otp_img},node-name=otp",
+            "-global", "aspeed-otp.drive=otp",
+        )
+        self.vm.launch()
+        self.wait_for_console_pattern("Booting Zephyr OS")
+
+if __name__ == '__main__':
+    AspeedTest.main()
-- 
2.43.0

[PATCH v1 11/12] docs/system/arm/aspeed: Update Aspeed and 2700 family boards list

[Jamin Lin via]

Remove the ast2700-evb entry from the Aspeed family boards list in
the documentation. The AST2700 platform now belongs to the new Aspeed
2700 family group, which has its own dedicated documentation section
and board definitions.

Update the Aspeed 2700 family boards list in the documentation to include
the new ast2700fc board entry.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 docs/system/arm/aspeed.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
index 6317c0e910..a0c05a6f73 100644
--- a/docs/system/arm/aspeed.rst
+++ b/docs/system/arm/aspeed.rst
@@ -1,4 +1,4 @@
-Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
+Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
 ====================================================================================================================================================================================================================================================================================================================================================================================================================================
 
 The QEMU Aspeed machines model BMCs of various OpenPOWER systems and
@@ -274,7 +274,7 @@ configuration file for OTP memory:
     done > otpmem.img
   fi
 
-Aspeed 2700 family boards (``ast2700-evb``)
+Aspeed 2700 family boards (``ast2700-evb``, ``ast2700fc``)
 ==================================================================
 
 The QEMU Aspeed machines model BMCs of Aspeed evaluation boards.
-- 
2.43.0

[PATCH v1 12/12] docs/system/arm/aspeed: Update Aspeed MiniBMC section to include AST1060 PFR processor

[Jamin Lin via]

Added details describing AST1060 as a PFR processor board alongside
AST1030 MiniBMC, and extended the list of missing devices to include
SMBus Filter and QSPI Monitor controllers.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 docs/system/arm/aspeed.rst | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
index a0c05a6f73..ffa5f4b372 100644
--- a/docs/system/arm/aspeed.rst
+++ b/docs/system/arm/aspeed.rst
@@ -448,23 +448,25 @@ Use ``tio`` or another terminal emulator to connect to the consoles:
    $ tio /dev/pts/57
 
 
-Aspeed minibmc family boards (``ast1030-evb``)
-==================================================================
+Aspeed minibmc and PFR processor family boards (``ast1030-evb``, ``ast1060-evb``)
+=================================================================================
 
-The QEMU Aspeed machines model mini BMCs of various Aspeed evaluation
-boards. They are based on different releases of the
-Aspeed SoC : the AST1030 integrating an ARM Cortex M4F CPU (200MHz).
+The QEMU Aspeed machines model mini BMCs and PFR processors of various Aspeed
+evaluation boards. They are based on different releases of the
+Aspeed SoC : the AST1030 (MiniBMC) and AST1060 (PFR Processor), both integrating
+an ARM Cortex M4F CPU (200MHz).
 
 The SoC comes with SRAM, SPI, I2C, etc.
 
-AST1030 SoC based machines :
+AST10x0 SoC based machines :
 
-- ``ast1030-evb``          Aspeed AST1030 Evaluation board (Cortex-M4F)
+- ``ast1030-evb``          Aspeed AST1030 MiniBMC Evaluation board (Cortex-M4F)
+- ``ast1060-evb``	   Aspeed AST1060 PFR Processor Evaluation board (Cortex-M4F)
 
 Supported devices
 -----------------
 
- * SMP (for the AST1030 Cortex-M4F)
+ * SMP (for the Cortex-M4F)
  * Interrupt Controller (VIC)
  * Timer Controller
  * I2C Controller
@@ -492,6 +494,8 @@ Missing devices
  * Virtual UART
  * eSPI Controller
  * I3C Controller
+ * SMBus Filter Controller
+ * QSPI Monitor Controller
 
 Boot options
 ------------
@@ -502,9 +506,11 @@ ASPEED GitHub release repository :
 
    https://github.com/AspeedTech-BMC/zephyr/releases
 
+   https://github.com/AspeedTech-BMC/aspeed-zephyr-project/releases
+
 To boot a kernel directly from a Zephyr build tree:
 
 .. code-block:: bash
 
   $ qemu-system-arm -M ast1030-evb -nographic \
-        -kernel zephyr.elf
+        -kernel zephyr.bin
-- 
2.43.0

Re: [PATCH v1 01/12] hw/arm/aspeed: Fix missing SPI IRQ connection causing DMA interrupt failure

[Cédric Le Goater]

Hello Jamin,

On 11/6/25 09:49, Jamin Lin wrote:
> It did not connect SPI IRQ to the Interrupt Controller, so even the SPI
> model raised the IRQ, the interrupt was not received. The CPU therefore
> did not trigger an interrupt via the controller, and the firmware never
> received the interrupt.
> 
> Fixes: 356b230ed13889e09d087a96498887de695df17e ("aspeed/soc: Add AST1030 support")
> Fixes: f25c0ae1079dc0b9de02676eb3e3949a09df9f41 ("aspeed/soc: Add AST2600 support")
> Fixes: 5dd883ab0635c9f715c77cc32622e458a0724581 ("aspeed/soc: Add AST2700 support")


AFAIR, the IRQ is for DMA which the drivers don't support yet.
Am I wrong ? When was it added ?

The code is fine and I am asking because of the fixes tags above.
It would mean propagating the fixes to the stable branches too.


Thanks,

C.

  

> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   hw/arm/aspeed_ast10x0.c | 2 ++
>   hw/arm/aspeed_ast2600.c | 2 ++
>   hw/arm/aspeed_ast27x0.c | 2 ++
>   3 files changed, 6 insertions(+)
> 
> diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c
> index 7f49c13391..ca487774ae 100644
> --- a/hw/arm/aspeed_ast10x0.c
> +++ b/hw/arm/aspeed_ast10x0.c
> @@ -372,6 +372,8 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
>                           sc->memmap[ASPEED_DEV_SPI1 + i]);
>           aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]), 1,
>                           ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
> +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> +                           aspeed_soc_ast1030_get_irq(s, ASPEED_DEV_SPI1 + i));
>       }
>   
>       /* Secure Boot Controller */
> diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
> index 498d1ecc07..4c5a42ea17 100644
> --- a/hw/arm/aspeed_ast2600.c
> +++ b/hw/arm/aspeed_ast2600.c
> @@ -557,6 +557,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
>                           sc->memmap[ASPEED_DEV_SPI1 + i]);
>           aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]), 1,
>                           ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
> +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> +                           aspeed_soc_ast2600_get_irq(s, ASPEED_DEV_SPI1 + i));
>       }
>   
>       /* EHCI */
> diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
> index c484bcd4e2..e02a674b13 100644
> --- a/hw/arm/aspeed_ast27x0.c
> +++ b/hw/arm/aspeed_ast27x0.c
> @@ -831,6 +831,8 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
>                           sc->memmap[ASPEED_DEV_SPI0 + i]);
>           aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]), 1,
>                           ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
> +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> +                           aspeed_soc_ast2700_get_irq(s, ASPEED_DEV_SPI0 + i));
>       }
>   
>       /* EHCI */

RE: [PATCH v1 01/12] hw/arm/aspeed: Fix missing SPI IRQ connection causing DMA interrupt failure

[Jamin Lin]

Hi Cédric,

> Subject: Re: [PATCH v1 01/12] hw/arm/aspeed: Fix missing SPI IRQ connection
> causing DMA interrupt failure
> 
> Hello Jamin,
> 
> On 11/6/25 09:49, Jamin Lin wrote:
> > It did not connect SPI IRQ to the Interrupt Controller, so even the
> > SPI model raised the IRQ, the interrupt was not received. The CPU
> > therefore did not trigger an interrupt via the controller, and the
> > firmware never received the interrupt.
> >
> > Fixes: 356b230ed13889e09d087a96498887de695df17e ("aspeed/soc: Add
> > AST1030 support")
> > Fixes: f25c0ae1079dc0b9de02676eb3e3949a09df9f41 ("aspeed/soc: Add
> > AST2600 support")
> > Fixes: 5dd883ab0635c9f715c77cc32622e458a0724581 ("aspeed/soc: Add
> > AST2700 support")
> 
> 
> AFAIR, the IRQ is for DMA which the drivers don't support yet.
> Am I wrong ? When was it added ?
> 
> The code is fine and I am asking because of the fixes tags above.
> It would mean propagating the fixes to the stable branches too.
> 

The reason is that the AST2500 supports FMC DMA but not SPI DMA.
For AST2600, AST1030, and AST2700, both FMC and SPI DMA are supported, but we missed connecting their IRQs to the interrupt controller.
"""I guess this happened because we copied the AST2500 SPI/FMC model when creating the AST2600 model, 
and then the AST1030 and AST2700 SoC models were copied from AST2600"""

Please see the drivers here:
Linux (AST2600 / AST2700)
https://github.com/AspeedTech-BMC/linux/blob/aspeed-master-v6.6/drivers/spi/spi-aspeed-smc.c 
AST2600:
static ssize_t aspeed_2600_spi_dirmap_dma_read(struct spi_mem_dirmap_desc *desc,
                                               u64 offs, size_t len, void *buf);

AST27x0:
static ssize_t aspeed_2700_spi_dirmap_dma_read(struct spi_mem_dirmap_desc *desc,
                                               u64 offs, size_t len, void *buf);
Zephyr (AST10x0)
https://github.com/AspeedTech-BMC/zephyr/blob/aspeed-main-v3.7.0/drivers/spi/spi_aspeed.c#L474 
#ifdef CONFIG_SPI_DMA_SUPPORT_ASPEED
static void aspeed_dma_irq_enable(const struct device *dev)

Thanks-Jamin

> 
> Thanks,
> 
> C.
> 
> 
> 
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> >   hw/arm/aspeed_ast10x0.c | 2 ++
> >   hw/arm/aspeed_ast2600.c | 2 ++
> >   hw/arm/aspeed_ast27x0.c | 2 ++
> >   3 files changed, 6 insertions(+)
> >
> > diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c index
> > 7f49c13391..ca487774ae 100644
> > --- a/hw/arm/aspeed_ast10x0.c
> > +++ b/hw/arm/aspeed_ast10x0.c
> > @@ -372,6 +372,8 @@ static void aspeed_soc_ast1030_realize(DeviceState
> *dev_soc, Error **errp)
> >                           sc->memmap[ASPEED_DEV_SPI1 + i]);
> >           aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]),
> 1,
> >
> > ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
> > +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> > +                           aspeed_soc_ast1030_get_irq(s,
> > + ASPEED_DEV_SPI1 + i));
> >       }
> >
> >       /* Secure Boot Controller */
> > diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index
> > 498d1ecc07..4c5a42ea17 100644
> > --- a/hw/arm/aspeed_ast2600.c
> > +++ b/hw/arm/aspeed_ast2600.c
> > @@ -557,6 +557,8 @@ static void aspeed_soc_ast2600_realize(DeviceState
> *dev, Error **errp)
> >                           sc->memmap[ASPEED_DEV_SPI1 + i]);
> >           aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]),
> 1,
> >
> > ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
> > +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> > +                           aspeed_soc_ast2600_get_irq(s,
> > + ASPEED_DEV_SPI1 + i));
> >       }
> >
> >       /* EHCI */
> > diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c index
> > c484bcd4e2..e02a674b13 100644
> > --- a/hw/arm/aspeed_ast27x0.c
> > +++ b/hw/arm/aspeed_ast27x0.c
> > @@ -831,6 +831,8 @@ static void aspeed_soc_ast2700_realize(DeviceState
> *dev, Error **errp)
> >                           sc->memmap[ASPEED_DEV_SPI0 + i]);
> >           aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]),
> 1,
> >
> > ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
> > +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> > +                           aspeed_soc_ast2700_get_irq(s,
> > + ASPEED_DEV_SPI0 + i));
> >       }
> >
> >       /* EHCI */

Re: [PATCH v1 01/12] hw/arm/aspeed: Fix missing SPI IRQ connection causing DMA interrupt failure

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> It did not connect SPI IRQ to the Interrupt Controller, so even the SPI
> model raised the IRQ, the interrupt was not received. The CPU therefore
> did not trigger an interrupt via the controller, and the firmware never
> received the interrupt.
> 
> Fixes: 356b230ed13889e09d087a96498887de695df17e ("aspeed/soc: Add AST1030 support")
> Fixes: f25c0ae1079dc0b9de02676eb3e3949a09df9f41 ("aspeed/soc: Add AST2600 support")
> Fixes: 5dd883ab0635c9f715c77cc32622e458a0724581 ("aspeed/soc: Add AST2700 support")

QEMU 7.2 and above should be updated

> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   hw/arm/aspeed_ast10x0.c | 2 ++
>   hw/arm/aspeed_ast2600.c | 2 ++
>   hw/arm/aspeed_ast27x0.c | 2 ++
>   3 files changed, 6 insertions(+)


Reviewed-by: Cédric Le Goater <clg@redhat.com>

Thanks,

C.



> diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c
> index 7f49c13391..ca487774ae 100644
> --- a/hw/arm/aspeed_ast10x0.c
> +++ b/hw/arm/aspeed_ast10x0.c
> @@ -372,6 +372,8 @@ static void aspeed_soc_ast1030_realize(DeviceState *dev_soc, Error **errp)
>                           sc->memmap[ASPEED_DEV_SPI1 + i]);
>           aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]), 1,
>                           ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
> +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> +                           aspeed_soc_ast1030_get_irq(s, ASPEED_DEV_SPI1 + i));
>       }
>   
>       /* Secure Boot Controller */
> diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
> index 498d1ecc07..4c5a42ea17 100644
> --- a/hw/arm/aspeed_ast2600.c
> +++ b/hw/arm/aspeed_ast2600.c
> @@ -557,6 +557,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
>                           sc->memmap[ASPEED_DEV_SPI1 + i]);
>           aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]), 1,
>                           ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
> +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> +                           aspeed_soc_ast2600_get_irq(s, ASPEED_DEV_SPI1 + i));
>       }
>   
>       /* EHCI */
> diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
> index c484bcd4e2..e02a674b13 100644
> --- a/hw/arm/aspeed_ast27x0.c
> +++ b/hw/arm/aspeed_ast27x0.c
> @@ -831,6 +831,8 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
>                           sc->memmap[ASPEED_DEV_SPI0 + i]);
>           aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->spi[i]), 1,
>                           ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
> +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> +                           aspeed_soc_ast2700_get_irq(s, ASPEED_DEV_SPI0 + i));
>       }
>   
>       /* EHCI */

Re: [PATCH v1 02/12] hw/block/m25p80: Add SFDP table for Winbond W25Q02JVM flash

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> Add the SFDP data table for Winbond W25Q02JVM flash device. The table
> was generated under Linux kernel by dumping the SFDP content using
> the following command:
> 
> ```
> hexdump -v -e '8/1 "0x%02x, " "\n"' \
>      /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> ```
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   hw/block/m25p80_sfdp.h |  1 +
>   hw/block/m25p80.c      |  2 ++
>   hw/block/m25p80_sfdp.c | 36 ++++++++++++++++++++++++++++++++++++
>   3 files changed, 39 insertions(+)

Reviewed-by: Cédric Le Goater <clg@redhat.com>

Thanks,

C.

Re: [PATCH v1 03/12] hw/misc/aspeed_scu: Fix the revision ID cannot be set in the SOC layer for AST2600 and AST1030

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> According to the design of the AST2600, it has a Silicon Revision ID
> Register, specifically SCU004 and SCU014, to set the Revision ID for the
> AST2600. For the AST2600 A3, SCU004 is set to 0x05030303 and SCU014 is
> set to 0x05030303.
> 
> In the "aspeed_ast2600_scu_reset" function, the hardcoded value
> "AST2600_A3_SILICON_REV" was used for SCU004, while "s->silicon_rev" was
> used for SCU014. The value of "s->silicon_rev" is set by the SoC layer
> via the "silicon-rev" property. This patch aligns both SCU004 and SCU014
> to use "s->silicon_rev" for consistency and flexibility.
> 
> Similarly, the "aspeed_ast1030_scu_reset" function also used a fixed
> revision constant ("AST1030_A1_SILICON_REV"). This change updates it to
> use the same "s->silicon_rev" property, ensuring that both SoCs follow
> a consistent and configurable revision handling mechanism.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   hw/misc/aspeed_scu.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 

Reviewed-by: Cédric Le Goater <clg@redhat.com>

Thanks,

C.

Re: [PATCH v1 04/12] hhw/misc/aspeed_scu: Add AST1060 A2 silicon revision definition

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> Add a new silicon revision constant AST1060_A2_SILICON_REV for the
> AST1060 SoC. This allows the SCU model and related SoC layers to
> identify and handle AST1060 A2 revision properly in the same way as
> other Aspeed SoC families.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   include/hw/misc/aspeed_scu.h | 1 +
>   hw/misc/aspeed_scu.c         | 1 +
>   2 files changed, 2 insertions(+)
> 
> diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h
> index 684b48b722..76ef8dc592 100644
> --- a/include/hw/misc/aspeed_scu.h
> +++ b/include/hw/misc/aspeed_scu.h
> @@ -51,6 +51,7 @@ struct AspeedSCUState {
>   #define AST2600_A3_SILICON_REV   0x05030303U
>   #define AST1030_A0_SILICON_REV   0x80000000U
>   #define AST1030_A1_SILICON_REV   0x80010000U
> +#define AST1060_A2_SILICON_REV   0xA0030000U
>   #define AST2700_A0_SILICON_REV   0x06000103U
>   #define AST2720_A0_SILICON_REV   0x06000203U
>   #define AST2750_A0_SILICON_REV   0x06000003U
> diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
> index 1f996d5398..300571256a 100644
> --- a/hw/misc/aspeed_scu.c
> +++ b/hw/misc/aspeed_scu.c
> @@ -565,6 +565,7 @@ static uint32_t aspeed_silicon_revs[] = {
>       AST2600_A3_SILICON_REV,
>       AST1030_A0_SILICON_REV,
>       AST1030_A1_SILICON_REV,
> +    AST1060_A2_SILICON_REV,
>       AST2700_A0_SILICON_REV,
>       AST2720_A0_SILICON_REV,
>       AST2750_A0_SILICON_REV,


Reviewed-by: Cédric Le Goater <clg@redhat.com>

Thanks,

C.

Re: [PATCH v1 05/12] hw/arm/aspeed_ast10x0: Add common init function for AST10x0 SoCs

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> Introduce a new common initialization function
> aspeed_soc_ast10x0_init() for AST10x0 series SoCs. This separates the
> shared initialization logic from the AST1030-specific part, allowing
> reuse by future SoCs such as AST1060.
> 
> The AST1060 does not include the LPC and PECI models, so the common
> initializer is used for all shared modules, while
> aspeed_soc_ast1030_init() adds initialization of LPC and PECI, which
> are unique to AST1030.
> 
> This refactor improves code reuse and prepares the codebase for
> supporting the AST1060 platform.
> 
> No functional changes.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   hw/arm/aspeed_ast10x0.c | 15 ++++++++++-----
>   1 file changed, 10 insertions(+), 5 deletions(-)
> 

Reviewed-by: Cédric Le Goater <clg@redhat.com>

Thanks,

C.

Re: [PATCH v1 08/12] hw/arm/aspeed_ast10x0: Add AST1060 SoC support

[Philippe Mathieu-Daudé]

On 6/11/25 09:49, Jamin Lin via wrote:
> Add initial support for the Aspeed AST1060 SoC. The AST1060 reuses most
> of the AST1030 peripheral device models, as the two SoCs share nearly
> the same controllers including WDT, SCU, TIMER, HACE, ADC, I2C, FMC,
> and SPI.
> 
> A new common initialization and realization framework (ast10x0_init
> and ast10x0_realize) is leveraged so AST1060 can instantiate the
> existing AST1030 models without redefining duplicate device types.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   hw/arm/aspeed_ast10x0.c | 61 ++++++++++++++++++++++++++++++++++++++++-
>   1 file changed, 60 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c
> index c85c21b149..17f5285d85 100644
> --- a/hw/arm/aspeed_ast10x0.c
> +++ b/hw/arm/aspeed_ast10x0.c
> @@ -190,6 +190,25 @@ static void aspeed_soc_ast1030_init(Object *obj)
>       object_initialize_child(obj, "peci", &s->peci, TYPE_ASPEED_PECI);
>   }
>   
> +static void aspeed_soc_ast1060_init(Object *obj)
> +{
> +    char socname[8] = "ast1030";
> +
> +    /*
> +     * The AST1060 SoC reuses the AST1030 device models. Since all peripheral
> +     * models (e.g. WDT, SCU, TIMER, HACE, ADC, I2C, FMC, SPI) defined for
> +     * AST1030 are compatible with AST1060, we simply reuse the existing
> +     * AST1030 models for AST1060.
> +     *
> +     * To simplify the implementation, AST1060 sets its socname to that of
> +     * AST1030, avoiding the need to create a full set of new
> +     * TYPE_ASPEED_1060_XXX device definitions. This allows the same
> +     * TYPE_ASPEED_1030_WDT and other models to be instantiated for both
> +     * SoCs.
> +     */
> +    aspeed_soc_ast10x0_init(obj, socname);

Why not simply use:

        aspeed_soc_ast10x0_init(obj, "ast1030");

?

> +}

RE: [PATCH v1 08/12] hw/arm/aspeed_ast10x0: Add AST1060 SoC support

[Jamin Lin]

Hi Philippe,

> Subject: Re: [PATCH v1 08/12] hw/arm/aspeed_ast10x0: Add AST1060 SoC
> support
> 
> On 6/11/25 09:49, Jamin Lin via wrote:
> > Add initial support for the Aspeed AST1060 SoC. The AST1060 reuses
> > most of the AST1030 peripheral device models, as the two SoCs share
> > nearly the same controllers including WDT, SCU, TIMER, HACE, ADC, I2C,
> > FMC, and SPI.
> >
> > A new common initialization and realization framework (ast10x0_init
> > and ast10x0_realize) is leveraged so AST1060 can instantiate the
> > existing AST1030 models without redefining duplicate device types.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> >   hw/arm/aspeed_ast10x0.c | 61
> ++++++++++++++++++++++++++++++++++++++++-
> >   1 file changed, 60 insertions(+), 1 deletion(-)
> >
> > diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c index
> > c85c21b149..17f5285d85 100644
> > --- a/hw/arm/aspeed_ast10x0.c
> > +++ b/hw/arm/aspeed_ast10x0.c
> > @@ -190,6 +190,25 @@ static void aspeed_soc_ast1030_init(Object *obj)
> >       object_initialize_child(obj, "peci", &s->peci, TYPE_ASPEED_PECI);
> >   }
> >
> > +static void aspeed_soc_ast1060_init(Object *obj) {
> > +    char socname[8] = "ast1030";
> > +
> > +    /*
> > +     * The AST1060 SoC reuses the AST1030 device models. Since all
> peripheral
> > +     * models (e.g. WDT, SCU, TIMER, HACE, ADC, I2C, FMC, SPI) defined
> for
> > +     * AST1030 are compatible with AST1060, we simply reuse the existing
> > +     * AST1030 models for AST1060.
> > +     *
> > +     * To simplify the implementation, AST1060 sets its socname to that of
> > +     * AST1030, avoiding the need to create a full set of new
> > +     * TYPE_ASPEED_1060_XXX device definitions. This allows the same
> > +     * TYPE_ASPEED_1030_WDT and other models to be instantiated for
> both
> > +     * SoCs.
> > +     */
> > +    aspeed_soc_ast10x0_init(obj, socname);
> 
> Why not simply use:
> 
>         aspeed_soc_ast10x0_init(obj, "ast1030");
> 
> ?

Thanks for the review and suggestions.
Will update it.

Thanks,
Jamin

> 
> > +}

Re: [PATCH v1 06/12] hw/arm/aspeed_ast10x0: Add common realize function for AST10x0 SoCs

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> Introduce a new common realize function aspeed_soc_ast10x0_realize()
> for AST10x0 series SoCs. The shared initialization and realization logic
> is now placed in this common function to improve code reuse and reduce
> duplication between different SoCs in the same family.
> 
> The AST1030 realization function aspeed_soc_ast1030_realize() is
> updated to call the new common routine and then perform realization of
> its own specific devices such as LPC and PECI, which are not present on
> future SoCs like AST1060.
> 
> This refactor simplifies maintenance and prepares the framework for
> adding AST1060 support.
> 
> No functional changes.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   hw/arm/aspeed_ast10x0.c | 128 ++++++++++++++++++++++------------------
>   1 file changed, 70 insertions(+), 58 deletions(-)


LGTM,


Reviewed-by: Cédric Le Goater <clg@redhat.com>

Thanks,

C.

Re: [PATCH v1 07/12] hw/arm/aspeed_ast10x0: Pass SoC name to common init for AST10x0 family reuse

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> Refactor the AST10x0 common initialization to accept a socname
> parameter.
> 
> The AST1030 model can be reused by AST1060 since they share most of the
> same controllers. This approach allows AST1060 to leverage the existing
> AST1030 initialization flow while keeping separate SoC-specific init
> functions for components that differ.
> 
> This prepares the framework for AST1060 support, allowing it to reuse
> AST1030 device models and initialization flow without code duplication.
> 
> No functional changes.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   hw/arm/aspeed_ast10x0.c | 14 +++++++-------
>   1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c
> index 5bbe16af24..c85c21b149 100644
> --- a/hw/arm/aspeed_ast10x0.c
> +++ b/hw/arm/aspeed_ast10x0.c
> @@ -107,19 +107,14 @@ static qemu_irq aspeed_soc_ast1030_get_irq(AspeedSoCState *s, int dev)
>       return qdev_get_gpio_in(DEVICE(&a->armv7m), sc->irqmap[dev]);
>   }
>   
> -static void aspeed_soc_ast10x0_init(Object *obj)
> +static void aspeed_soc_ast10x0_init(Object *obj, const char *socname)
>   {
>       Aspeed10x0SoCState *a = ASPEED10X0_SOC(obj);
>       AspeedSoCState *s = ASPEED_SOC(obj);
>       AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
> -    char socname[8];
>       char typename[64];
>       int i;
>   
> -    if (sscanf(object_get_typename(obj), "%7s", socname) != 1) {
> -        g_assert_not_reached();
> -    }
> -
>       object_initialize_child(obj, "armv7m", &a->armv7m, TYPE_ARMV7M);
>   
>       s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0);
> @@ -184,8 +179,13 @@ static void aspeed_soc_ast10x0_init(Object *obj)
>   static void aspeed_soc_ast1030_init(Object *obj)
>   {
>       AspeedSoCState *s = ASPEED_SOC(obj);
> +    char socname[8];
> +
> +    if (sscanf(object_get_typename(obj), "%7s", socname) != 1) {
> +        g_assert_not_reached();
> +    }
>   
> -    aspeed_soc_ast10x0_init(obj);
> +    aspeed_soc_ast10x0_init(obj, socname);


As Philippe suggested, why not use directly :

        aspeed_soc_ast10x0_init(obj, "ast1030");


Thanks,

C.



>       object_initialize_child(obj, "lpc", &s->lpc, TYPE_ASPEED_LPC);
>       object_initialize_child(obj, "peci", &s->peci, TYPE_ASPEED_PECI);
>   }

Re: [PATCH v1 09/12] hw/arm/aspeed_ast10x0_evb: Add AST1060 EVB machine support

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> Add a new machine definition ast1060-evb to support the Aspeed AST1060
> evaluation board. The new EVB reuses the same MiniBMC framework used by
> AST1030, as both SoCs share the same core peripherals and controller
> designs.
> 
> The AST1060 EVB machine initializes the ast1060-a2 SoC and sets the
> FMC and SPI flash models (w25q80bl and w25q02jvm) for simulation.
> This enables QEMU to boot and emulate firmware images for AST1060-based
> platforms.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   hw/arm/aspeed_ast10x0_evb.c | 23 +++++++++++++++++++++++
>   1 file changed, 23 insertions(+)
> 
> diff --git a/hw/arm/aspeed_ast10x0_evb.c b/hw/arm/aspeed_ast10x0_evb.c
> index 7af2a77865..a01385b543 100644
> --- a/hw/arm/aspeed_ast10x0_evb.c
> +++ b/hw/arm/aspeed_ast10x0_evb.c
> @@ -96,12 +96,35 @@ static void aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc,
>       aspeed_machine_class_init_cpus_defaults(mc);
>   }
>   
> +static void aspeed_minibmc_machine_ast1060_evb_class_init(ObjectClass *oc,
> +                                                          const void *data)
> +{
> +    MachineClass *mc = MACHINE_CLASS(oc);
> +    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
> +
> +    mc->desc = "Aspeed AST1060 PFR (Cortex-M4)";

What does "PFR" mean ?

> +    amc->soc_name = "ast1060-a2";
> +    amc->hw_strap1 = 0;
> +    amc->hw_strap2 = 0;
> +    mc->init = aspeed_minibmc_machine_init;
> +    amc->fmc_model = "w25q80bl";
> +    amc->spi_model = "w25q02jvm";
> +    amc->num_cs = 2;
> +    amc->macs_mask = 0;
> +    aspeed_machine_class_init_cpus_defaults(mc);
> +}
> +
>   static const TypeInfo aspeed_ast10x0_evb_types[] = {
>       {
>           .name           = MACHINE_TYPE_NAME("ast1030-evb"),
>           .parent         = TYPE_ASPEED_MACHINE,
>           .class_init     = aspeed_minibmc_machine_ast1030_evb_class_init,
>           .interfaces     = arm_machine_interfaces,
> +    }, {
> +        .name           = MACHINE_TYPE_NAME("ast1060-evb"),
> +        .parent         = TYPE_ASPEED_MACHINE,
> +        .class_init     = aspeed_minibmc_machine_ast1060_evb_class_init,
> +        .interfaces     = arm_machine_interfaces,
>       }
>   };
>   

Reviewed-by: Cédric Le Goater <clg@redhat.com>

Thanks,

C.

Re: [PATCH v1 10/12] tests/functional/arm/test_aspeed_ast1060: Add functional tests for Aspeed AST1060 SoC

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> Add functional tests for the Aspeed AST1060 SoC and its evaluation board.
> The new test test_aspeed_ast1060.py validates booting the AST1060 EVB
> machine using the Zephyr OS and ASPEED PROT application (ast1060_prot_v03.02.tgz)
> and ensures basic console functionality.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>

Looks ok.


Thanks,

C.


> ---
>   tests/functional/arm/meson.build            |  1 +
>   tests/functional/arm/test_aspeed_ast1060.py | 52 +++++++++++++++++++++
>   2 files changed, 53 insertions(+)
>   create mode 100644 tests/functional/arm/test_aspeed_ast1060.py
> 
> diff --git a/tests/functional/arm/meson.build b/tests/functional/arm/meson.build
> index d1ed076a6a..1762a49604 100644
> --- a/tests/functional/arm/meson.build
> +++ b/tests/functional/arm/meson.build
> @@ -28,6 +28,7 @@ tests_arm_system_quick = [
>   
>   tests_arm_system_thorough = [
>     'aspeed_ast1030',
> +  'aspeed_ast1060',
>     'aspeed_palmetto',
>     'aspeed_romulus',
>     'aspeed_witherspoon',
> diff --git a/tests/functional/arm/test_aspeed_ast1060.py b/tests/functional/arm/test_aspeed_ast1060.py
> new file mode 100644
> index 0000000000..034efa5342
> --- /dev/null
> +++ b/tests/functional/arm/test_aspeed_ast1060.py
> @@ -0,0 +1,52 @@
> +#!/usr/bin/env python3
> +#
> +# Functional test that boots the ASPEED SoCs with firmware
> +#
> +# Copyright (C) 2025 ASPEED Technology Inc
> +#
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +
> +from aspeed import AspeedTest
> +from qemu_test import Asset, exec_command_and_wait_for_pattern
> +
> +
> +class AST1060Machine(AspeedTest):
> +    ASSET_ASPEED_AST1060_PROT_3_02 = Asset(
> +        ('https://github.com/AspeedTech-BMC'
> +         '/aspeed-zephyr-project/releases/download/v03.02'
> +         '/ast1060_prot_v03.02.tgz'),
> +         'dd5f1adc935316ddd1906506a02e15567bd7290657b52320f1a225564cc175bd')
> +
> +    def test_arm_ast1060_prot_3_02(self):
> +        self.set_machine('ast1060-evb')
> +
> +        kernel_name = "ast1060_prot/zephyr.bin"
> +        kernel_file = self.archive_extract(
> +            self.ASSET_ASPEED_AST1060_PROT_3_02, member=kernel_name)
> +
> +        self.vm.set_console()
> +        self.vm.add_args('-kernel', kernel_file, '-nographic')
> +        self.vm.launch()
> +        self.wait_for_console_pattern("Booting Zephyr OS")
> +        exec_command_and_wait_for_pattern(self, "help",
> +                                          "Available commands")
> +
> +    def test_arm_ast1060_otp_blockdev_device(self):
> +        self.vm.set_machine("ast1060-evb")
> +
> +        kernel_name = "ast1060_prot/zephyr.bin"
> +        kernel_file = self.archive_extract(self.ASSET_ASPEED_AST1060_PROT_3_02,
> +                                           member=kernel_name)
> +        otp_img = self.generate_otpmem_image()
> +
> +        self.vm.set_console()
> +        self.vm.add_args(
> +            "-kernel", kernel_file,
> +            "-blockdev", f"driver=file,filename={otp_img},node-name=otp",
> +            "-global", "aspeed-otp.drive=otp",
> +        )
> +        self.vm.launch()
> +        self.wait_for_console_pattern("Booting Zephyr OS")
> +
> +if __name__ == '__main__':
> +    AspeedTest.main()

Re: [PATCH v1 11/12] docs/system/arm/aspeed: Update Aspeed and 2700 family boards list

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> Remove the ast2700-evb entry from the Aspeed family boards list in
> the documentation. The AST2700 platform now belongs to the new Aspeed
> 2700 family group, which has its own dedicated documentation section
> and board definitions.
> 
> Update the Aspeed 2700 family boards list in the documentation to include
> the new ast2700fc board entry.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   docs/system/arm/aspeed.rst | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
> index 6317c0e910..a0c05a6f73 100644
> --- a/docs/system/arm/aspeed.rst
> +++ b/docs/system/arm/aspeed.rst
> @@ -1,4 +1,4 @@
> -Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
> +Aspeed family boards (``ast2500-evb``, ``ast2600-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``, ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``, ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``, ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``, ``witherspoon-bmc``, ``yosemitev2-bmc``)
>   ====================================================================================================================================================================================================================================================================================================================================================================================================================================
>   

The title text line above and the  "...===..." line should match in length.


Thanks,

C.


>   The QEMU Aspeed machines model BMCs of various OpenPOWER systems and
> @@ -274,7 +274,7 @@ configuration file for OTP memory:
>       done > otpmem.img
>     fi
>   
> -Aspeed 2700 family boards (``ast2700-evb``)
> +Aspeed 2700 family boards (``ast2700-evb``, ``ast2700fc``)
>   ==================================================================
>   
>   The QEMU Aspeed machines model BMCs of Aspeed evaluation boards.

Re: [PATCH v1 12/12] docs/system/arm/aspeed: Update Aspeed MiniBMC section to include AST1060 PFR processor

[Cédric Le Goater]

On 11/6/25 09:49, Jamin Lin wrote:
> Added details describing AST1060 as a PFR processor board alongside

Please explain what the TLA 'PFR' means.

> AST1030 MiniBMC, and extended the list of missing devices to include
> SMBus Filter and QSPI Monitor controllers.
> 
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
>   docs/system/arm/aspeed.rst | 24 +++++++++++++++---------
>   1 file changed, 15 insertions(+), 9 deletions(-)
> 
> diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
> index a0c05a6f73..ffa5f4b372 100644
> --- a/docs/system/arm/aspeed.rst
> +++ b/docs/system/arm/aspeed.rst
> @@ -448,23 +448,25 @@ Use ``tio`` or another terminal emulator to connect to the consoles:
>      $ tio /dev/pts/57
>   
>   
> -Aspeed minibmc family boards (``ast1030-evb``)
> -==================================================================
> +Aspeed minibmc and PFR processor family boards (``ast1030-evb``, ``ast1060-evb``)
> +=================================================================================
>   
> -The QEMU Aspeed machines model mini BMCs of various Aspeed evaluation
> -boards. They are based on different releases of the
> -Aspeed SoC : the AST1030 integrating an ARM Cortex M4F CPU (200MHz).
> +The QEMU Aspeed machines model mini BMCs and PFR processors of various Aspeed
> +evaluation boards. They are based on different releases of the
> +Aspeed SoC : the AST1030 (MiniBMC) and AST1060 (PFR Processor), both integrating
> +an ARM Cortex M4F CPU (200MHz).
>   
>   The SoC comes with SRAM, SPI, I2C, etc.
>   
> -AST1030 SoC based machines :
> +AST10x0 SoC based machines :
>   
> -- ``ast1030-evb``          Aspeed AST1030 Evaluation board (Cortex-M4F)
> +- ``ast1030-evb``          Aspeed AST1030 MiniBMC Evaluation board (Cortex-M4F)
> +- ``ast1060-evb``	   Aspeed AST1060 PFR Processor Evaluation board (Cortex-M4F)
>   
>   Supported devices
>   -----------------
>   
> - * SMP (for the AST1030 Cortex-M4F)
> + * SMP (for the Cortex-M4F)
>    * Interrupt Controller (VIC)
>    * Timer Controller
>    * I2C Controller
> @@ -492,6 +494,8 @@ Missing devices
>    * Virtual UART
>    * eSPI Controller
>    * I3C Controller
> + * SMBus Filter Controller
> + * QSPI Monitor Controller
>   
>   Boot options
>   ------------
> @@ -502,9 +506,11 @@ ASPEED GitHub release repository :
>   
>      https://github.com/AspeedTech-BMC/zephyr/releases
>   
> +   https://github.com/AspeedTech-BMC/aspeed-zephyr-project/releases
> +

Should we keep a reference to both URLs ?

Thanks,

C.


>   To boot a kernel directly from a Zephyr build tree:
>   
>   .. code-block:: bash
>   
>     $ qemu-system-arm -M ast1030-evb -nographic \
> -        -kernel zephyr.elf
> +        -kernel zephyr.bin

RE: [PATCH v1 07/12] hw/arm/aspeed_ast10x0: Pass SoC name to common init for AST10x0 family reuse

[Jamin Lin]

Hi Cédric

> Subject: Re: [PATCH v1 07/12] hw/arm/aspeed_ast10x0: Pass SoC name to
> common init for AST10x0 family reuse
> 
> On 11/6/25 09:49, Jamin Lin wrote:
> > Refactor the AST10x0 common initialization to accept a socname
> > parameter.
> >
> > The AST1030 model can be reused by AST1060 since they share most of
> > the same controllers. This approach allows AST1060 to leverage the
> > existing
> > AST1030 initialization flow while keeping separate SoC-specific init
> > functions for components that differ.
> >
> > This prepares the framework for AST1060 support, allowing it to reuse
> > AST1030 device models and initialization flow without code duplication.
> >
> > No functional changes.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> >   hw/arm/aspeed_ast10x0.c | 14 +++++++-------
> >   1 file changed, 7 insertions(+), 7 deletions(-)
> >
> > diff --git a/hw/arm/aspeed_ast10x0.c b/hw/arm/aspeed_ast10x0.c index
> > 5bbe16af24..c85c21b149 100644
> > --- a/hw/arm/aspeed_ast10x0.c
> > +++ b/hw/arm/aspeed_ast10x0.c
> > @@ -107,19 +107,14 @@ static qemu_irq
> aspeed_soc_ast1030_get_irq(AspeedSoCState *s, int dev)
> >       return qdev_get_gpio_in(DEVICE(&a->armv7m), sc->irqmap[dev]);
> >   }
> >
> > -static void aspeed_soc_ast10x0_init(Object *obj)
> > +static void aspeed_soc_ast10x0_init(Object *obj, const char *socname)
> >   {
> >       Aspeed10x0SoCState *a = ASPEED10X0_SOC(obj);
> >       AspeedSoCState *s = ASPEED_SOC(obj);
> >       AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
> > -    char socname[8];
> >       char typename[64];
> >       int i;
> >
> > -    if (sscanf(object_get_typename(obj), "%7s", socname) != 1) {
> > -        g_assert_not_reached();
> > -    }
> > -
> >       object_initialize_child(obj, "armv7m", &a->armv7m,
> TYPE_ARMV7M);
> >
> >       s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL,
> > 0); @@ -184,8 +179,13 @@ static void aspeed_soc_ast10x0_init(Object
> *obj)
> >   static void aspeed_soc_ast1030_init(Object *obj)
> >   {
> >       AspeedSoCState *s = ASPEED_SOC(obj);
> > +    char socname[8];
> > +
> > +    if (sscanf(object_get_typename(obj), "%7s", socname) != 1) {
> > +        g_assert_not_reached();
> > +    }
> >
> > -    aspeed_soc_ast10x0_init(obj);
> > +    aspeed_soc_ast10x0_init(obj, socname);
> 
> 
> As Philippe suggested, why not use directly :
> 
>         aspeed_soc_ast10x0_init(obj, "ast1030");
> 
Thanks for the review and suggestion.
Will update it.

Thanks-Jamin
> 
> Thanks,
> 
> C.
> 
> 
> 
> >       object_initialize_child(obj, "lpc", &s->lpc, TYPE_ASPEED_LPC);
> >       object_initialize_child(obj, "peci", &s->peci, TYPE_ASPEED_PECI);
> >   }

RE: [PATCH v1 09/12] hw/arm/aspeed_ast10x0_evb: Add AST1060 EVB machine support

[Jamin Lin]

Hi Cédric,

> Subject: Re: [PATCH v1 09/12] hw/arm/aspeed_ast10x0_evb: Add AST1060 EVB
> machine support
> 
> On 11/6/25 09:49, Jamin Lin wrote:
> > Add a new machine definition ast1060-evb to support the Aspeed AST1060
> > evaluation board. The new EVB reuses the same MiniBMC framework used
> > by AST1030, as both SoCs share the same core peripherals and
> > controller designs.
> >
> > The AST1060 EVB machine initializes the ast1060-a2 SoC and sets the
> > FMC and SPI flash models (w25q80bl and w25q02jvm) for simulation.
> > This enables QEMU to boot and emulate firmware images for
> > AST1060-based platforms.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> >   hw/arm/aspeed_ast10x0_evb.c | 23 +++++++++++++++++++++++
> >   1 file changed, 23 insertions(+)
> >
> > diff --git a/hw/arm/aspeed_ast10x0_evb.c b/hw/arm/aspeed_ast10x0_evb.c
> > index 7af2a77865..a01385b543 100644
> > --- a/hw/arm/aspeed_ast10x0_evb.c
> > +++ b/hw/arm/aspeed_ast10x0_evb.c
> > @@ -96,12 +96,35 @@ static void
> aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc,
> >       aspeed_machine_class_init_cpus_defaults(mc);
> >   }
> >
> > +static void aspeed_minibmc_machine_ast1060_evb_class_init(ObjectClass
> *oc,
> > +
> const void
> > +*data) {
> > +    MachineClass *mc = MACHINE_CLASS(oc);
> > +    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
> > +
> > +    mc->desc = "Aspeed AST1060 PFR (Cortex-M4)";
> 
> What does "PFR" mean ?
> 
Thanks for your review and suggestion.

I will update it to " Platform Root of Trust"
Thanks-Jamin

> > +    amc->soc_name = "ast1060-a2";
> > +    amc->hw_strap1 = 0;
> > +    amc->hw_strap2 = 0;
> > +    mc->init = aspeed_minibmc_machine_init;
> > +    amc->fmc_model = "w25q80bl";
> > +    amc->spi_model = "w25q02jvm";
> > +    amc->num_cs = 2;
> > +    amc->macs_mask = 0;
> > +    aspeed_machine_class_init_cpus_defaults(mc);
> > +}
> > +
> >   static const TypeInfo aspeed_ast10x0_evb_types[] = {
> >       {
> >           .name           = MACHINE_TYPE_NAME("ast1030-evb"),
> >           .parent         = TYPE_ASPEED_MACHINE,
> >           .class_init     =
> aspeed_minibmc_machine_ast1030_evb_class_init,
> >           .interfaces     = arm_machine_interfaces,
> > +    }, {
> > +        .name           = MACHINE_TYPE_NAME("ast1060-evb"),
> > +        .parent         = TYPE_ASPEED_MACHINE,
> > +        .class_init     =
> aspeed_minibmc_machine_ast1060_evb_class_init,
> > +        .interfaces     = arm_machine_interfaces,
> >       }
> >   };
> >
> 
> Reviewed-by: Cédric Le Goater <clg@redhat.com>
> 
> Thanks,
> 
> C.
> 

RE: [PATCH v1 11/12] docs/system/arm/aspeed: Update Aspeed and 2700 family boards list

[Jamin Lin]

Hi Cédric,

> Subject: Re: [PATCH v1 11/12] docs/system/arm/aspeed: Update Aspeed and
> 2700 family boards list
> 
> On 11/6/25 09:49, Jamin Lin wrote:
> > Remove the ast2700-evb entry from the Aspeed family boards list in the
> > documentation. The AST2700 platform now belongs to the new Aspeed
> > 2700 family group, which has its own dedicated documentation section
> > and board definitions.
> >
> > Update the Aspeed 2700 family boards list in the documentation to
> > include the new ast2700fc board entry.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> >   docs/system/arm/aspeed.rst | 4 ++--
> >   1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
> > index 6317c0e910..a0c05a6f73 100644
> > --- a/docs/system/arm/aspeed.rst
> > +++ b/docs/system/arm/aspeed.rst
> > @@ -1,4 +1,4 @@
> > -Aspeed family boards (``ast2500-evb``, ``ast2600-evb``,
> > ``ast2700-evb``, ``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``,
> > ``fby35-bmc``, ``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``,
> > ``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``,
> > ``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``,
> > ``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``,
> > ``witherspoon-bmc``, ``yosemitev2-bmc``)
> > +Aspeed family boards (``ast2500-evb``, ``ast2600-evb``,
> > +``bletchley-bmc``, ``fuji-bmc``, ``gb200nvl-bmc``, ``fby35-bmc``,
> > +``fp5280g2-bmc``, ``g220a-bmc``, ``palmetto-bmc``,
> > +``qcom-dc-scm-v1-bmc``, ``qcom-firework-bmc``, ``quanta-q71l-bmc``,
> > +``rainier-bmc``, ``romulus-bmc``, ``sonorapass-bmc``,
> > +``supermicrox11-bmc``, ``supermicrox11spi-bmc``, ``tiogapass-bmc``,
> > +``witherspoon-bmc``, ``yosemitev2-bmc``)
> >
> >
> ================================================================
> ======
> >
> ================================================================
> ======
> >
> ================================================================
> ======
> >
> ================================================================
> ======
> >
> ================================================================
> ======
> >
> ================================================================
> ======
> >
> 
> The title text line above and the  "...===..." line should match in length.
> 
Thanks for your review and suggestion.
Will update it.

Thanks-Jamin
> 
> Thanks,
> 
> C.
> 
> 
> >   The QEMU Aspeed machines model BMCs of various OpenPOWER
> systems and
> > @@ -274,7 +274,7 @@ configuration file for OTP memory:
> >       done > otpmem.img
> >     fi
> >
> > -Aspeed 2700 family boards (``ast2700-evb``)
> > +Aspeed 2700 family boards (``ast2700-evb``, ``ast2700fc``)
> >
> ================================================================
> ==
> >
> >   The QEMU Aspeed machines model BMCs of Aspeed evaluation boards.

RE: [PATCH v1 12/12] docs/system/arm/aspeed: Update Aspeed MiniBMC section to include AST1060 PFR processor

[Jamin Lin]

Hi Cédric

> Subject: Re: [PATCH v1 12/12] docs/system/arm/aspeed: Update Aspeed
> MiniBMC section to include AST1060 PFR processor
> 
> On 11/6/25 09:49, Jamin Lin wrote:
> > Added details describing AST1060 as a PFR processor board alongside
> 
> Please explain what the TLA 'PFR' means.

PFR is the abbreviation for Platform Firmware Resilience, as defined in the NIST SP 800-193
(Platform Firmware Resiliency Guidelines, https://csrc.nist.gov/pubs/sp/800/193/final )
The AST1060 implements the NIST SP 800-193 PFR functionality and effectively serves as the Platform Root of Trust.
So, I will update to use " Platform Root of Trust" instead of PFR.

> 
> > AST1030 MiniBMC, and extended the list of missing devices to include
> > SMBus Filter and QSPI Monitor controllers.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> >   docs/system/arm/aspeed.rst | 24 +++++++++++++++---------
> >   1 file changed, 15 insertions(+), 9 deletions(-)
> >
> > diff --git a/docs/system/arm/aspeed.rst b/docs/system/arm/aspeed.rst
> > index a0c05a6f73..ffa5f4b372 100644
> > --- a/docs/system/arm/aspeed.rst
> > +++ b/docs/system/arm/aspeed.rst
> > @@ -448,23 +448,25 @@ Use ``tio`` or another terminal emulator to
> connect to the consoles:
> >      $ tio /dev/pts/57
> >
> >
> > -Aspeed minibmc family boards (``ast1030-evb``)
> >
> -===============================================================
> ===
> > +Aspeed minibmc and PFR processor family boards (``ast1030-evb``,
> > +``ast1060-evb``)
> >
> +===============================================================
> ======
> > +============
> >
> > -The QEMU Aspeed machines model mini BMCs of various Aspeed
> evaluation
> > -boards. They are based on different releases of the -Aspeed SoC : the
> > AST1030 integrating an ARM Cortex M4F CPU (200MHz).
> > +The QEMU Aspeed machines model mini BMCs and PFR processors of
> > +various Aspeed evaluation boards. They are based on different
> > +releases of the Aspeed SoC : the AST1030 (MiniBMC) and AST1060 (PFR
> > +Processor), both integrating an ARM Cortex M4F CPU (200MHz).
> >
> >   The SoC comes with SRAM, SPI, I2C, etc.
> >
> > -AST1030 SoC based machines :
> > +AST10x0 SoC based machines :
> >
> > -- ``ast1030-evb``          Aspeed AST1030 Evaluation board
> (Cortex-M4F)
> > +- ``ast1030-evb``          Aspeed AST1030 MiniBMC Evaluation board
> (Cortex-M4F)
> > +- ``ast1060-evb``	   Aspeed AST1060 PFR Processor Evaluation board
> (Cortex-M4F)
> >
> >   Supported devices
> >   -----------------
> >
> > - * SMP (for the AST1030 Cortex-M4F)
> > + * SMP (for the Cortex-M4F)
> >    * Interrupt Controller (VIC)
> >    * Timer Controller
> >    * I2C Controller
> > @@ -492,6 +494,8 @@ Missing devices
> >    * Virtual UART
> >    * eSPI Controller
> >    * I3C Controller
> > + * SMBus Filter Controller
> > + * QSPI Monitor Controller
> >
> >   Boot options
> >   ------------
> > @@ -502,9 +506,11 @@ ASPEED GitHub release repository :
> >
> >      https://github.com/AspeedTech-BMC/zephyr/releases
> >
> > +   https://github.com/AspeedTech-BMC/aspeed-zephyr-project/releases
> > +
> 
> Should we keep a reference to both URLs ?
> 
Will remove it.
Thanks-Jamin
> Thanks,
> 
> C.
> 
> 
> >   To boot a kernel directly from a Zephyr build tree:
> >
> >   .. code-block:: bash
> >
> >     $ qemu-system-arm -M ast1030-evb -nographic \
> > -        -kernel zephyr.elf
> > +        -kernel zephyr.bin