From: Harsh Prateek Bora <harshpb@linux.ibm.com>
To: Salil Mehta <salil.mehta@huawei.com>,
qemu-devel@nongnu.org, qemu-arm@nongnu.org
Cc: maz@kernel.org, jean-philippe@linaro.org,
jonathan.cameron@huawei.com, lpieralisi@kernel.org,
peter.maydell@linaro.org, richard.henderson@linaro.org,
imammedo@redhat.com, andrew.jones@linux.dev, david@redhat.com,
philmd@linaro.org, eric.auger@redhat.com, oliver.upton@linux.dev,
pbonzini@redhat.com, mst@redhat.com, will@kernel.org,
gshan@redhat.com, rafael@kernel.org, alex.bennee@linaro.org,
linux@armlinux.org.uk, darren@os.amperecomputing.com,
ilkka@os.amperecomputing.com, vishnu@os.amperecomputing.com,
karl.heubaum@oracle.com, miguel.luis@oracle.com,
salil.mehta@opnsrc.net, zhukeqian1@huawei.com,
wangxiongfeng2@huawei.com, wangyanan55@huawei.com,
jiakernel2@gmail.com, maobibo@loongson.cn,
lixianglai@loongson.cn, npiggin@gmail.com, linuxarm@huawei.com,
Shaoqin Huang <shahuang@redhat.com>,
Zhao Liu <zhao1.liu@intel.com>
Subject: Re: [PATCH V12 1/8] accel/kvm: Extract common KVM vCPU {creation,parking} code
Date: Thu, 30 May 2024 10:35:13 +0530 [thread overview]
Message-ID: <62f55169-1796-4d8e-a35d-7f003a172750@linux.ibm.com> (raw)
In-Reply-To: <20240529234241.205053-2-salil.mehta@huawei.com>
On 5/30/24 05:12, Salil Mehta wrote:
> KVM vCPU creation is done once during the vCPU realization when Qemu vCPU thread
> is spawned. This is common to all the architectures as of now.
>
> Hot-unplug of vCPU results in destruction of the vCPU object in QOM but the
> corresponding KVM vCPU object in the Host KVM is not destroyed as KVM doesn't
> support vCPU removal. Therefore, its representative KVM vCPU object/context in
> Qemu is parked.
>
> Refactor architecture common logic so that some APIs could be reused by vCPU
> Hotplug code of some architectures likes ARM, Loongson etc. Update new/old APIs
> with trace events. No functional change is intended here.
>
> Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Tested-by: Xianglai Li <lixianglai@loongson.cn>
> Tested-by: Miguel Luis <miguel.luis@oracle.com>
> Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
> Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
> Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
> Tested-by: Zhao Liu <zhao1.liu@intel.com>
> Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
> ---
> accel/kvm/kvm-all.c | 95 ++++++++++++++++++++++++++++--------------
> accel/kvm/kvm-cpus.h | 23 ++++++++++
> accel/kvm/trace-events | 5 ++-
> 3 files changed, 90 insertions(+), 33 deletions(-)
>
Since there are no functional changes intended here and we have a
different patch series (ppc64 vcpu hotplug failure fixes) depending on
this patch as well, it will be nice to see this patch getting merged
soon.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
> diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
> index c0be9f5eed..8f9128bb92 100644
> --- a/accel/kvm/kvm-all.c
> +++ b/accel/kvm/kvm-all.c
> @@ -340,14 +340,71 @@ err:
> return ret;
> }
>
> +void kvm_park_vcpu(CPUState *cpu)
> +{
> + struct KVMParkedVcpu *vcpu;
> +
> + trace_kvm_park_vcpu(cpu->cpu_index, kvm_arch_vcpu_id(cpu));
> +
> + vcpu = g_malloc0(sizeof(*vcpu));
> + vcpu->vcpu_id = kvm_arch_vcpu_id(cpu);
> + vcpu->kvm_fd = cpu->kvm_fd;
> + QLIST_INSERT_HEAD(&kvm_state->kvm_parked_vcpus, vcpu, node);
> +}
> +
> +int kvm_unpark_vcpu(KVMState *s, unsigned long vcpu_id)
> +{
> + struct KVMParkedVcpu *cpu;
> + int kvm_fd = -ENOENT;
> +
> + QLIST_FOREACH(cpu, &s->kvm_parked_vcpus, node) {
> + if (cpu->vcpu_id == vcpu_id) {
> + QLIST_REMOVE(cpu, node);
> + kvm_fd = cpu->kvm_fd;
> + g_free(cpu);
> + }
> + }
> +
> + trace_kvm_unpark_vcpu(vcpu_id, kvm_fd > 0 ? "unparked" : "not found parked");
> +
> + return kvm_fd;
> +}
> +
> +int kvm_create_vcpu(CPUState *cpu)
> +{
> + unsigned long vcpu_id = kvm_arch_vcpu_id(cpu);
> + KVMState *s = kvm_state;
> + int kvm_fd;
> +
> + /* check if the KVM vCPU already exist but is parked */
> + kvm_fd = kvm_unpark_vcpu(s, vcpu_id);
> + if (kvm_fd < 0) {
> + /* vCPU not parked: create a new KVM vCPU */
> + kvm_fd = kvm_vm_ioctl(s, KVM_CREATE_VCPU, vcpu_id);
> + if (kvm_fd < 0) {
> + error_report("KVM_CREATE_VCPU IOCTL failed for vCPU %lu", vcpu_id);
> + return kvm_fd;
> + }
> + }
> +
> + cpu->kvm_fd = kvm_fd;
> + cpu->kvm_state = s;
> + cpu->vcpu_dirty = true;
> + cpu->dirty_pages = 0;
> + cpu->throttle_us_per_full = 0;
> +
> + trace_kvm_create_vcpu(cpu->cpu_index, vcpu_id, kvm_fd);
> +
> + return 0;
> +}
> +
> static int do_kvm_destroy_vcpu(CPUState *cpu)
> {
> KVMState *s = kvm_state;
> long mmap_size;
> - struct KVMParkedVcpu *vcpu = NULL;
> int ret = 0;
>
> - trace_kvm_destroy_vcpu();
> + trace_kvm_destroy_vcpu(cpu->cpu_index, kvm_arch_vcpu_id(cpu));
>
> ret = kvm_arch_destroy_vcpu(cpu);
> if (ret < 0) {
> @@ -373,10 +430,7 @@ static int do_kvm_destroy_vcpu(CPUState *cpu)
> }
> }
>
> - vcpu = g_malloc0(sizeof(*vcpu));
> - vcpu->vcpu_id = kvm_arch_vcpu_id(cpu);
> - vcpu->kvm_fd = cpu->kvm_fd;
> - QLIST_INSERT_HEAD(&kvm_state->kvm_parked_vcpus, vcpu, node);
> + kvm_park_vcpu(cpu);
> err:
> return ret;
> }
> @@ -389,24 +443,6 @@ void kvm_destroy_vcpu(CPUState *cpu)
> }
> }
>
> -static int kvm_get_vcpu(KVMState *s, unsigned long vcpu_id)
> -{
> - struct KVMParkedVcpu *cpu;
> -
> - QLIST_FOREACH(cpu, &s->kvm_parked_vcpus, node) {
> - if (cpu->vcpu_id == vcpu_id) {
> - int kvm_fd;
> -
> - QLIST_REMOVE(cpu, node);
> - kvm_fd = cpu->kvm_fd;
> - g_free(cpu);
> - return kvm_fd;
> - }
> - }
> -
> - return kvm_vm_ioctl(s, KVM_CREATE_VCPU, (void *)vcpu_id);
> -}
> -
> int kvm_init_vcpu(CPUState *cpu, Error **errp)
> {
> KVMState *s = kvm_state;
> @@ -415,19 +451,14 @@ int kvm_init_vcpu(CPUState *cpu, Error **errp)
>
> trace_kvm_init_vcpu(cpu->cpu_index, kvm_arch_vcpu_id(cpu));
>
> - ret = kvm_get_vcpu(s, kvm_arch_vcpu_id(cpu));
> + ret = kvm_create_vcpu(cpu);
> if (ret < 0) {
> - error_setg_errno(errp, -ret, "kvm_init_vcpu: kvm_get_vcpu failed (%lu)",
> + error_setg_errno(errp, -ret,
> + "kvm_init_vcpu: kvm_create_vcpu failed (%lu)",
> kvm_arch_vcpu_id(cpu));
> goto err;
> }
>
> - cpu->kvm_fd = ret;
> - cpu->kvm_state = s;
> - cpu->vcpu_dirty = true;
> - cpu->dirty_pages = 0;
> - cpu->throttle_us_per_full = 0;
> -
> mmap_size = kvm_ioctl(s, KVM_GET_VCPU_MMAP_SIZE, 0);
> if (mmap_size < 0) {
> ret = mmap_size;
> diff --git a/accel/kvm/kvm-cpus.h b/accel/kvm/kvm-cpus.h
> index ca40add32c..2c1cad4179 100644
> --- a/accel/kvm/kvm-cpus.h
> +++ b/accel/kvm/kvm-cpus.h
> @@ -22,5 +22,28 @@ bool kvm_supports_guest_debug(void);
> int kvm_insert_breakpoint(CPUState *cpu, int type, vaddr addr, vaddr len);
> int kvm_remove_breakpoint(CPUState *cpu, int type, vaddr addr, vaddr len);
> void kvm_remove_all_breakpoints(CPUState *cpu);
> +/**
> + * kvm_create_vcpu - Gets a parked KVM vCPU or creates a KVM vCPU
> + * @cpu: QOM CPUState object for which KVM vCPU has to be fetched/created.
> + *
> + * @returns: 0 when success, errno (<0) when failed.
> + */
> +int kvm_create_vcpu(CPUState *cpu);
>
> +/**
> + * kvm_park_vcpu - Park QEMU KVM vCPU context
> + * @cpu: QOM CPUState object for which QEMU KVM vCPU context has to be parked.
> + *
> + * @returns: none
> + */
> +void kvm_park_vcpu(CPUState *cpu);
> +
> +/**
> + * kvm_unpark_vcpu - unpark QEMU KVM vCPU context
> + * @s: KVM State
> + * @vcpu_id: Architecture vCPU ID of the parked vCPU
> + *
> + * @returns: KVM fd
> + */
> +int kvm_unpark_vcpu(KVMState *s, unsigned long vcpu_id);
> #endif /* KVM_CPUS_H */
> diff --git a/accel/kvm/trace-events b/accel/kvm/trace-events
> index 681ccb667d..37626c1ac5 100644
> --- a/accel/kvm/trace-events
> +++ b/accel/kvm/trace-events
> @@ -9,6 +9,10 @@ kvm_device_ioctl(int fd, int type, void *arg) "dev fd %d, type 0x%x, arg %p"
> kvm_failed_reg_get(uint64_t id, const char *msg) "Warning: Unable to retrieve ONEREG %" PRIu64 " from KVM: %s"
> kvm_failed_reg_set(uint64_t id, const char *msg) "Warning: Unable to set ONEREG %" PRIu64 " to KVM: %s"
> kvm_init_vcpu(int cpu_index, unsigned long arch_cpu_id) "index: %d id: %lu"
> +kvm_create_vcpu(int cpu_index, unsigned long arch_cpu_id, int kvm_fd) "index: %d, id: %lu, kvm fd: %d"
> +kvm_destroy_vcpu(int cpu_index, unsigned long arch_cpu_id) "index: %d id: %lu"
> +kvm_park_vcpu(int cpu_index, unsigned long arch_cpu_id) "index: %d id: %lu"
> +kvm_unpark_vcpu(unsigned long arch_cpu_id, const char *msg) "id: %lu %s"
> kvm_irqchip_commit_routes(void) ""
> kvm_irqchip_add_msi_route(char *name, int vector, int virq) "dev %s vector %d virq %d"
> kvm_irqchip_update_msi_route(int virq) "Updating MSI route virq=%d"
> @@ -25,7 +29,6 @@ kvm_dirty_ring_reaper(const char *s) "%s"
> kvm_dirty_ring_reap(uint64_t count, int64_t t) "reaped %"PRIu64" pages (took %"PRIi64" us)"
> kvm_dirty_ring_reaper_kick(const char *reason) "%s"
> kvm_dirty_ring_flush(int finished) "%d"
> -kvm_destroy_vcpu(void) ""
> kvm_failed_get_vcpu_mmap_size(void) ""
> kvm_cpu_exec(void) ""
> kvm_interrupt_exit_request(void) ""
next prev parent reply other threads:[~2024-05-30 5:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-29 23:42 [PATCH V12 0/8] Add architecture agnostic code to support vCPU Hotplug Salil Mehta via
2024-05-29 23:42 ` [PATCH V12 1/8] accel/kvm: Extract common KVM vCPU {creation, parking} code Salil Mehta via
2024-05-30 5:05 ` Harsh Prateek Bora [this message]
2024-05-29 23:42 ` [PATCH V12 2/8] hw/acpi: Move CPU ctrl-dev MMIO region len macro to common header file Salil Mehta via
2024-05-29 23:42 ` [PATCH V12 3/8] hw/acpi: Update ACPI GED framework to support vCPU Hotplug Salil Mehta via
2024-05-29 23:42 ` [PATCH V12 4/8] hw/acpi: Update GED _EVT method AML with CPU scan Salil Mehta via
2024-05-29 23:42 ` [PATCH V12 5/8] hw/acpi: Update CPUs AML with cpu-(ctrl)dev change Salil Mehta via
2024-05-29 23:42 ` [PATCH V12 6/8] physmem: Add helper function to destroy CPU AddressSpace Salil Mehta via
2024-05-29 23:42 ` [PATCH V12 7/8] gdbstub: Add helper function to unregister GDB register space Salil Mehta via
2024-05-29 23:42 ` [PATCH V12 8/8] docs/specs/acpi_hw_reduced_hotplug: Add the CPU Hotplug Event Bit Salil Mehta via
2024-06-02 22:03 ` [PATCH V12 0/8] Add architecture agnostic code to support vCPU Hotplug Michael S. Tsirkin
2024-06-05 14:03 ` Igor Mammedov
2024-06-25 23:51 ` Salil Mehta
2024-06-26 4:13 ` Gavin Shan
2024-06-26 17:53 ` Salil Mehta via
2024-07-01 8:48 ` Igor Mammedov
2024-07-01 16:33 ` Salil Mehta via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=62f55169-1796-4d8e-a35d-7f003a172750@linux.ibm.com \
--to=harshpb@linux.ibm.com \
--cc=alex.bennee@linaro.org \
--cc=andrew.jones@linux.dev \
--cc=darren@os.amperecomputing.com \
--cc=david@redhat.com \
--cc=eric.auger@redhat.com \
--cc=gshan@redhat.com \
--cc=ilkka@os.amperecomputing.com \
--cc=imammedo@redhat.com \
--cc=jean-philippe@linaro.org \
--cc=jiakernel2@gmail.com \
--cc=jonathan.cameron@huawei.com \
--cc=karl.heubaum@oracle.com \
--cc=linux@armlinux.org.uk \
--cc=linuxarm@huawei.com \
--cc=lixianglai@loongson.cn \
--cc=lpieralisi@kernel.org \
--cc=maobibo@loongson.cn \
--cc=maz@kernel.org \
--cc=miguel.luis@oracle.com \
--cc=mst@redhat.com \
--cc=npiggin@gmail.com \
--cc=oliver.upton@linux.dev \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=rafael@kernel.org \
--cc=richard.henderson@linaro.org \
--cc=salil.mehta@huawei.com \
--cc=salil.mehta@opnsrc.net \
--cc=shahuang@redhat.com \
--cc=vishnu@os.amperecomputing.com \
--cc=wangxiongfeng2@huawei.com \
--cc=wangyanan55@huawei.com \
--cc=will@kernel.org \
--cc=zhao1.liu@intel.com \
--cc=zhukeqian1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).