Re: [RFC PATCH 6/9] ui/gtk: Add a new parameter to assign connectors/monitors to GFX VCs

["Kim, Dongwon" <dongwon.kim@intel.com>]

On 7/7/2023 7:07 AM, Markus Armbruster wrote:
> "Kim, Dongwon" <dongwon.kim@intel.com> writes:
>
>> Hi Markus,
>>
>> So I've worked on the description of this param. Can you check if this new version looks ok?
>>
>> # @connectors:  List of physical monitor/connector names where the GTK
>> #           windows containing the respective graphics virtual consoles (VCs)
>> #           are to be placed. Index of the connector name in the array directly
>> #           indicates the id of the VC.
>> #           For example, with "-device gtk,connectors.0=DP-1, connectors.1=DP-2",
>> #           a physical display connected to DP-1 port will be the target monitor
>> #           for VC0 and the one on DP-2 will be the target for VC1. If there is
>> #           no connector associated with a VC, then that VC won't be placed anywhere
>> #           before the QEMU is relaunched with a proper connector name set for it.
>> #           If a connector name exists for a VC but the display cable is not plugged
>> #           in when guest is launched, the VC will be just hidden but will show up
>> #           as soon as the cable is plugged in. If a display is connected in the beginning
>> #           but later disconnected, VC will immediately be hidden and guest will detect
>> #           it as a disconnected display. This option does not force 1 to 1 mapping
>> #           between the connector and the VC, which means multiple VCs can be placed
>> #           on the same display but vice versa is not possible (a single VC duplicated
>> #           on a multiple displays)
>> #           (Since 8.1)
> Better!
>
> Suggest to replace "that VC won't be placed anywhere" by "that VC won't
> be displayed".

yeah, I will update it in v2 and send the new patch shortly.

>
> Ignorant questions:
>
> 1. How would I plug / unplug display cables?

I am not sure if I understood your question correctly but 1 or more 
guest displays (GTK windows) are bound to a certain physical displays 
like HDMI or DP monitors. So plug/unplug means we disconnect those 
physical HDMI or DP cables manually. Or this manual hot plug in can be 
emulated by you write something to sysfs depending on what display 
driver you use.

>
> 2. If I connect multiple VCs to the same display, what will I see?  Are
> they multiplexed somehow?

Yeah multiple VCs will be shown on that display. But those could be 
overlapped since those are all placed at (0, 0) of display in many 
cases.. but this all depends on how the windows manager determines the 
starting locations.

>
> Old question not yet answered: Using a list for the mapping means the
> mapping must be dense, e.g. I can't map #0 and #2 but not #1.  Is this
> what we want?

No, it doesn't have to be dense. In your example, you can just leave the 
place for VC1 blank. For example, you could do 
connectors.0=DP-1,connectors.2=HDMI-1. But in this case, VC1 won't be 
activated and stay as disconnected from guest's perspective. I think 
this info is also needed in v2.

>
> [...]
>