* [Qemu-devel] [PATCH v2 for-4.1 1/2] backup: Copy only dirty areas
2019-08-01 17:38 [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas Max Reitz
@ 2019-08-01 17:38 ` Max Reitz
2019-08-01 17:39 ` [Qemu-devel] [PATCH v2 for-4.1 2/2] iotests: Test backup job with two guest writes Max Reitz
` (3 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: Max Reitz @ 2019-08-01 17:38 UTC (permalink / raw)
To: qemu-block
Cc: Kevin Wolf, Vladimir Sementsov-Ogievskiy, John Snow, qemu-devel,
Max Reitz
The backup job must only copy areas that the copy_bitmap reports as
dirty. This is always the case when using traditional non-offloading
backup, because it copies each cluster separately. When offloading the
copy operation, we sometimes copy more than one cluster at a time, but
we only check whether the first one is dirty.
Therefore, whenever copy offloading is possible, the backup job
currently produces wrong output when the guest writes to an area of
which an inner part has already been backed up, because that inner part
will be re-copied.
Fixes: 9ded4a0114968e98b41494fc035ba14f84cdf700
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
block/backup.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/block/backup.c b/block/backup.c
index 715e1d3be8..1ee271f9f1 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -202,22 +202,31 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job,
cow_request_begin(&cow_request, job, start, end);
while (start < end) {
+ int64_t dirty_end;
+
if (!hbitmap_get(job->copy_bitmap, start)) {
trace_backup_do_cow_skip(job, start);
start += job->cluster_size;
continue; /* already copied */
}
+ dirty_end = hbitmap_next_zero(job->copy_bitmap, start, (end - start));
+ if (dirty_end < 0) {
+ dirty_end = end;
+ }
+
trace_backup_do_cow_process(job, start);
if (job->use_copy_range) {
- ret = backup_cow_with_offload(job, start, end, is_write_notifier);
+ ret = backup_cow_with_offload(job, start, dirty_end,
+ is_write_notifier);
if (ret < 0) {
job->use_copy_range = false;
}
}
if (!job->use_copy_range) {
- ret = backup_cow_with_bounce_buffer(job, start, end, is_write_notifier,
+ ret = backup_cow_with_bounce_buffer(job, start, dirty_end,
+ is_write_notifier,
error_is_read, &bounce_buffer);
}
if (ret < 0) {
--
2.21.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v2 for-4.1 2/2] iotests: Test backup job with two guest writes
2019-08-01 17:38 [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas Max Reitz
2019-08-01 17:38 ` [Qemu-devel] [PATCH v2 for-4.1 1/2] " Max Reitz
@ 2019-08-01 17:39 ` Max Reitz
2019-08-01 18:02 ` Vladimir Sementsov-Ogievskiy
2019-08-01 23:36 ` [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas no-reply
` (2 subsequent siblings)
4 siblings, 1 reply; 8+ messages in thread
From: Max Reitz @ 2019-08-01 17:39 UTC (permalink / raw)
To: qemu-block
Cc: Kevin Wolf, Vladimir Sementsov-Ogievskiy, John Snow, qemu-devel,
Max Reitz
Perform two guest writes to not yet backed up areas of an image, where
the former touches an inner area of the latter.
Before HEAD^, copy offloading broke this in two ways:
(1) The target image differs from the reference image (what the source
was when the backup started).
(2) But you will not see that in the failing output, because the job
offset is reported as being greater than the job length. This is
because one cluster is copied twice, and thus accounted for twice,
but of course the job length does not increase.
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/056 | 39 ++++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/056.out | 4 ++--
2 files changed, 41 insertions(+), 2 deletions(-)
diff --git a/tests/qemu-iotests/056 b/tests/qemu-iotests/056
index f40fc11a09..e761e465ae 100755
--- a/tests/qemu-iotests/056
+++ b/tests/qemu-iotests/056
@@ -133,6 +133,7 @@ class BackupTest(iotests.QMPTestCase):
self.vm = iotests.VM()
self.test_img = img_create('test')
self.dest_img = img_create('dest')
+ self.ref_img = img_create('ref')
self.vm.add_drive(self.test_img)
self.vm.launch()
@@ -140,6 +141,7 @@ class BackupTest(iotests.QMPTestCase):
self.vm.shutdown()
try_remove(self.test_img)
try_remove(self.dest_img)
+ try_remove(self.ref_img)
def hmp_io_writes(self, drive, patterns):
for pattern in patterns:
@@ -177,6 +179,43 @@ class BackupTest(iotests.QMPTestCase):
self.assert_qmp(event, 'data/error', qerror)
return False
+ def test_overlapping_writes(self):
+ # Write something to back up
+ self.hmp_io_writes('drive0', [('42', '0M', '2M')])
+
+ # Create a reference backup
+ self.qmp_backup_and_wait(device='drive0', format=iotests.imgfmt,
+ sync='full', target=self.ref_img,
+ auto_dismiss=False)
+ res = self.vm.qmp('block-job-dismiss', id='drive0')
+ self.assert_qmp(res, 'return', {})
+
+ # Now to the test backup: We simulate the following guest
+ # writes:
+ # (1) [1M + 64k, 1M + 128k): Afterwards, everything in that
+ # area should be in the target image, and we must not copy
+ # it again (because the source image has changed now)
+ # (64k is the job's cluster size)
+ # (2) [1M, 2M): The backup job must not get overeager. It
+ # must copy [1M, 1M + 64k) and [1M + 128k, 2M) separately,
+ # but not the area in between.
+
+ self.qmp_backup(device='drive0', format=iotests.imgfmt, sync='full',
+ target=self.dest_img, speed=1, auto_dismiss=False)
+
+ self.hmp_io_writes('drive0', [('23', '%ik' % (1024 + 64), '64k'),
+ ('66', '1M', '1M')])
+
+ # Let the job complete
+ res = self.vm.qmp('block-job-set-speed', device='drive0', speed=0)
+ self.assert_qmp(res, 'return', {})
+ self.qmp_backup_wait('drive0')
+ res = self.vm.qmp('block-job-dismiss', id='drive0')
+ self.assert_qmp(res, 'return', {})
+
+ self.assertTrue(iotests.compare_images(self.ref_img, self.dest_img),
+ 'target image does not match reference image')
+
def test_dismiss_false(self):
res = self.vm.qmp('query-block-jobs')
self.assert_qmp(res, 'return', [])
diff --git a/tests/qemu-iotests/056.out b/tests/qemu-iotests/056.out
index dae404e278..36376bed87 100644
--- a/tests/qemu-iotests/056.out
+++ b/tests/qemu-iotests/056.out
@@ -1,5 +1,5 @@
-.........
+..........
----------------------------------------------------------------------
-Ran 9 tests
+Ran 10 tests
OK
--
2.21.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [Qemu-devel] [PATCH v2 for-4.1 2/2] iotests: Test backup job with two guest writes
2019-08-01 17:39 ` [Qemu-devel] [PATCH v2 for-4.1 2/2] iotests: Test backup job with two guest writes Max Reitz
@ 2019-08-01 18:02 ` Vladimir Sementsov-Ogievskiy
0 siblings, 0 replies; 8+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2019-08-01 18:02 UTC (permalink / raw)
To: Max Reitz, qemu-block@nongnu.org
Cc: Kevin Wolf, John Snow, qemu-devel@nongnu.org
01.08.2019 20:39, Max Reitz wrote:
> Perform two guest writes to not yet backed up areas of an image, where
> the former touches an inner area of the latter.
>
> Before HEAD^, copy offloading broke this in two ways:
> (1) The target image differs from the reference image (what the source
> was when the backup started).
> (2) But you will not see that in the failing output, because the job
> offset is reported as being greater than the job length. This is
> because one cluster is copied twice, and thus accounted for twice,
> but of course the job length does not increase.
>
> Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas
2019-08-01 17:38 [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas Max Reitz
2019-08-01 17:38 ` [Qemu-devel] [PATCH v2 for-4.1 1/2] " Max Reitz
2019-08-01 17:39 ` [Qemu-devel] [PATCH v2 for-4.1 2/2] iotests: Test backup job with two guest writes Max Reitz
@ 2019-08-01 23:36 ` no-reply
2019-08-02 13:34 ` Kevin Wolf
2019-08-05 15:36 ` Max Reitz
4 siblings, 0 replies; 8+ messages in thread
From: no-reply @ 2019-08-01 23:36 UTC (permalink / raw)
To: mreitz; +Cc: kwolf, vsementsov, qemu-block, qemu-devel, mreitz, jsnow
Patchew URL: https://patchew.org/QEMU/20190801173900.23851-1-mreitz@redhat.com/
Hi,
This series failed the asan build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
make docker-image-fedora V=1 NETWORK=1
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1
=== TEST SCRIPT END ===
PASS 1 fdc-test /x86_64/fdc/cmos
PASS 2 fdc-test /x86_64/fdc/no_media_on_start
PASS 3 fdc-test /x86_64/fdc/read_without_media
==7928==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 fdc-test /x86_64/fdc/media_change
PASS 5 fdc-test /x86_64/fdc/sense_interrupt
PASS 6 fdc-test /x86_64/fdc/relative_seek
---
PASS 32 test-opts-visitor /visitor/opts/range/beyond
PASS 33 test-opts-visitor /visitor/opts/dict/unvisited
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-coroutine -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-coroutine"
==7973==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-coroutine /basic/no-dangling-access
PASS 2 test-coroutine /basic/lifecycle
PASS 3 test-coroutine /basic/yield
==7973==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe3d7ca000; bottom 0x7f81a17f8000; size: 0x007c9bfd2000 (535193001984)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 4 test-coroutine /basic/nesting
---
PASS 11 test-aio /aio/event/wait
PASS 12 test-aio /aio/event/flush
PASS 13 test-aio /aio/event/wait/no-flush-cb
==7992==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 14 test-aio /aio/timer/schedule
PASS 15 test-aio /aio/coroutine/queue-chaining
PASS 16 test-aio /aio-gsource/flush
---
PASS 28 test-aio /aio-gsource/timer/schedule
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-aio-multithread -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-aio-multithread"
PASS 1 test-aio-multithread /aio/multi/lifecycle
==7998==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 12 fdc-test /x86_64/fdc/read_no_dma_19
PASS 13 fdc-test /x86_64/fdc/fuzz-registers
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ide-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="ide-test"
PASS 2 test-aio-multithread /aio/multi/schedule
==8016==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 ide-test /x86_64/ide/identify
PASS 3 test-aio-multithread /aio/multi/mutex/contended
==8027==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 ide-test /x86_64/ide/flush
==8038==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 ide-test /x86_64/ide/bmdma/simple_rw
==8044==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 ide-test /x86_64/ide/bmdma/trim
PASS 4 test-aio-multithread /aio/multi/mutex/handoff
==8050==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 5 ide-test /x86_64/ide/bmdma/short_prdt
==8061==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 5 test-aio-multithread /aio/multi/mutex/mcs
PASS 6 ide-test /x86_64/ide/bmdma/one_sector_short_prdt
==8072==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 6 test-aio-multithread /aio/multi/mutex/pthread
PASS 7 ide-test /x86_64/ide/bmdma/long_prdt
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-throttle -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-throttle"
==8081==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-throttle /throttle/leak_bucket
PASS 2 test-throttle /throttle/compute_wait
PASS 3 test-throttle /throttle/init
---
PASS 14 test-throttle /throttle/config/max
PASS 15 test-throttle /throttle/config/iops_size
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-thread-pool -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-thread-pool"
==8079==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-thread-pool /thread-pool/submit
==8089==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 test-thread-pool /thread-pool/submit-aio
PASS 3 test-thread-pool /thread-pool/submit-co
PASS 4 test-thread-pool /thread-pool/submit-many
==8079==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffeac9e4000; bottom 0x7f5d9c9fe000; size: 0x00a10ffe6000 (691758063616)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 8 ide-test /x86_64/ide/bmdma/no_busmaster
PASS 9 ide-test /x86_64/ide/flush/nodev
==8164==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 10 ide-test /x86_64/ide/flush/empty_drive
PASS 5 test-thread-pool /thread-pool/cancel
==8169==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 11 ide-test /x86_64/ide/flush/retry_pci
==8175==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 12 ide-test /x86_64/ide/flush/retry_isa
PASS 6 test-thread-pool /thread-pool/cancel-async
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-hbitmap -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-hbitmap"
==8181==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-hbitmap /hbitmap/granularity
PASS 2 test-hbitmap /hbitmap/size/0
PASS 3 test-hbitmap /hbitmap/size/unaligned
---
PASS 5 test-hbitmap /hbitmap/iter/partial
PASS 6 test-hbitmap /hbitmap/iter/granularity
PASS 7 test-hbitmap /hbitmap/iter/iter_and_reset
==8192==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 8 test-hbitmap /hbitmap/get/all
PASS 9 test-hbitmap /hbitmap/get/some
PASS 10 test-hbitmap /hbitmap/set/all
---
PASS 29 test-hbitmap /hbitmap/truncate/shrink/large
PASS 30 test-hbitmap /hbitmap/meta/zero
PASS 14 ide-test /x86_64/ide/cdrom/pio_large
==8198==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 15 ide-test /x86_64/ide/cdrom/dma
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ahci-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="ahci-test"
==8212==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 ahci-test /x86_64/ahci/sanity
==8218==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 ahci-test /x86_64/ahci/pci_spec
PASS 31 test-hbitmap /hbitmap/meta/one
PASS 32 test-hbitmap /hbitmap/meta/byte
PASS 33 test-hbitmap /hbitmap/meta/word
==8224==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 ahci-test /x86_64/ahci/pci_enable
==8230==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 34 test-hbitmap /hbitmap/meta/sector
PASS 35 test-hbitmap /hbitmap/serialize/align
PASS 4 ahci-test /x86_64/ahci/hba_spec
==8236==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 5 ahci-test /x86_64/ahci/hba_enable
==8242==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 36 test-hbitmap /hbitmap/serialize/basic
PASS 37 test-hbitmap /hbitmap/serialize/part
PASS 38 test-hbitmap /hbitmap/serialize/zeroes
---
PASS 42 test-hbitmap /hbitmap/next_dirty_area/next_dirty_area_1
PASS 43 test-hbitmap /hbitmap/next_dirty_area/next_dirty_area_4
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} tests/test-bdrv-drain -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-bdrv-drain"
==8250==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 test-bdrv-drain /bdrv-drain/nested
PASS 2 test-bdrv-drain /bdrv-drain/multiparent
PASS 3 test-bdrv-drain /bdrv-drain/set_aio_context
---
PASS 17 test-bdrv-drain /bdrv-drain/graph-change/drain_all
PASS 18 test-bdrv-drain /bdrv-drain/iothread/drain_all
=================================================================
==8250==ERROR: AddressSanitizer: heap-use-after-free on address 0x61200002c7f0 at pc 0x560815ff50d6 bp 0x7f07859b8680 sp 0x7f07859b8678
WRITE of size 1 at 0x61200002c7f0 thread T9
==8255==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
#0 0x560815ff50d5 in aio_notify /tmp/qemu-test/src/util/async.c:351:9
#1 0x560815ff6d0b in qemu_bh_schedule /tmp/qemu-test/src/util/async.c:167:9
#2 0x560815ff9f10 in aio_co_schedule /tmp/qemu-test/src/util/async.c:464:5
---
Right alloca redzone: cb
Shadow gap: cc
==8250==ABORTING
ERROR - too few tests run (expected 40, got 18)
make: *** [/tmp/qemu-test/src/tests/Makefile.include:904: check-unit] Error 1
make: *** Waiting for unfinished jobs....
PASS 7 ahci-test /x86_64/ahci/max
==8268==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 8 ahci-test /x86_64/ahci/reset
==8274==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8274==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffec0f80000; bottom 0x7f2ae3ffe000; size: 0x00d3dcf82000 (909945348096)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 9 ahci-test /x86_64/ahci/io/pio/lba28/simple/zero
==8280==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8280==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffca5a6c000; bottom 0x7f17e81fe000; size: 0x00e4bd86e000 (982432276480)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 10 ahci-test /x86_64/ahci/io/pio/lba28/simple/low
==8286==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8286==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff533c3000; bottom 0x7f61b17fe000; size: 0x009da1bc5000 (677023338496)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 11 ahci-test /x86_64/ahci/io/pio/lba28/simple/high
==8292==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8292==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffef2048000; bottom 0x7f92d0ffe000; size: 0x006c2104a000 (464410419200)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 12 ahci-test /x86_64/ahci/io/pio/lba28/double/zero
==8298==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8298==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff88eeb000; bottom 0x7f1879bfe000; size: 0x00e70f2ed000 (992392171520)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 13 ahci-test /x86_64/ahci/io/pio/lba28/double/low
==8304==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8304==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffc5e25e000; bottom 0x7f5d455fe000; size: 0x009f18c60000 (683315429376)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 14 ahci-test /x86_64/ahci/io/pio/lba28/double/high
==8310==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8310==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffd0f3bd000; bottom 0x7f3891b7c000; size: 0x00c47d841000 (843919396864)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 15 ahci-test /x86_64/ahci/io/pio/lba28/long/zero
==8316==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8316==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff6f25b000; bottom 0x7f723a7fe000; size: 0x008d34a5d000 (606473670656)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 16 ahci-test /x86_64/ahci/io/pio/lba28/long/low
==8322==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8322==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffc1779c000; bottom 0x7f2237924000; size: 0x00d9dfe78000 (935764393984)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 17 ahci-test /x86_64/ahci/io/pio/lba28/long/high
==8328==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 18 ahci-test /x86_64/ahci/io/pio/lba28/short/zero
==8334==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 19 ahci-test /x86_64/ahci/io/pio/lba28/short/low
==8340==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 20 ahci-test /x86_64/ahci/io/pio/lba28/short/high
==8346==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8346==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff57b69000; bottom 0x7f2ad97fe000; size: 0x00d47e36b000 (912650579968)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 21 ahci-test /x86_64/ahci/io/pio/lba48/simple/zero
==8352==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8352==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffc89aeb000; bottom 0x7f2f4f3fe000; size: 0x00cd3a6ed000 (881448636416)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 22 ahci-test /x86_64/ahci/io/pio/lba48/simple/low
==8358==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8358==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe84572000; bottom 0x7f6aafffe000; size: 0x0093d4574000 (634922680320)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 23 ahci-test /x86_64/ahci/io/pio/lba48/simple/high
==8364==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8364==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe9fc49000; bottom 0x7f9d213fe000; size: 0x00617e84b000 (418734452736)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 24 ahci-test /x86_64/ahci/io/pio/lba48/double/zero
==8370==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8370==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff546b1000; bottom 0x7f55c4bfe000; size: 0x00a98fab3000 (728259833856)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 25 ahci-test /x86_64/ahci/io/pio/lba48/double/low
==8376==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8376==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe939f8000; bottom 0x7f55f77fe000; size: 0x00a89c1fa000 (724173824000)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 26 ahci-test /x86_64/ahci/io/pio/lba48/double/high
==8382==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8382==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff08d65000; bottom 0x7f90c8124000; size: 0x006e40c41000 (473532993536)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 27 ahci-test /x86_64/ahci/io/pio/lba48/long/zero
==8388==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8388==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7fff10920000; bottom 0x7f136f37c000; size: 0x00eba15a4000 (1012024360960)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 28 ahci-test /x86_64/ahci/io/pio/lba48/long/low
==8394==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8394==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffc51640000; bottom 0x7f73473fe000; size: 0x00890a242000 (588580659200)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 29 ahci-test /x86_64/ahci/io/pio/lba48/long/high
==8400==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 30 ahci-test /x86_64/ahci/io/pio/lba48/short/zero
==8406==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 31 ahci-test /x86_64/ahci/io/pio/lba48/short/low
==8412==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 32 ahci-test /x86_64/ahci/io/pio/lba48/short/high
==8418==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 33 ahci-test /x86_64/ahci/io/dma/lba28/fragmented
==8424==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 34 ahci-test /x86_64/ahci/io/dma/lba28/retry
==8430==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 35 ahci-test /x86_64/ahci/io/dma/lba28/simple/zero
==8436==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 36 ahci-test /x86_64/ahci/io/dma/lba28/simple/low
==8442==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 37 ahci-test /x86_64/ahci/io/dma/lba28/simple/high
==8448==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 38 ahci-test /x86_64/ahci/io/dma/lba28/double/zero
==8454==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 39 ahci-test /x86_64/ahci/io/dma/lba28/double/low
==8460==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 40 ahci-test /x86_64/ahci/io/dma/lba28/double/high
==8466==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 41 ahci-test /x86_64/ahci/io/dma/lba28/long/zero
==8472==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 42 ahci-test /x86_64/ahci/io/dma/lba28/long/low
==8478==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 43 ahci-test /x86_64/ahci/io/dma/lba28/long/high
==8484==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 44 ahci-test /x86_64/ahci/io/dma/lba28/short/zero
==8490==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 45 ahci-test /x86_64/ahci/io/dma/lba28/short/low
==8496==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 46 ahci-test /x86_64/ahci/io/dma/lba28/short/high
==8502==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 47 ahci-test /x86_64/ahci/io/dma/lba48/simple/zero
==8508==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 48 ahci-test /x86_64/ahci/io/dma/lba48/simple/low
==8514==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 49 ahci-test /x86_64/ahci/io/dma/lba48/simple/high
==8520==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 50 ahci-test /x86_64/ahci/io/dma/lba48/double/zero
==8526==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 51 ahci-test /x86_64/ahci/io/dma/lba48/double/low
==8532==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 52 ahci-test /x86_64/ahci/io/dma/lba48/double/high
==8539==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 53 ahci-test /x86_64/ahci/io/dma/lba48/long/zero
==8545==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 54 ahci-test /x86_64/ahci/io/dma/lba48/long/low
==8551==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 55 ahci-test /x86_64/ahci/io/dma/lba48/long/high
==8557==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 56 ahci-test /x86_64/ahci/io/dma/lba48/short/zero
==8563==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 57 ahci-test /x86_64/ahci/io/dma/lba48/short/low
==8569==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 58 ahci-test /x86_64/ahci/io/dma/lba48/short/high
==8575==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 59 ahci-test /x86_64/ahci/io/ncq/simple
==8581==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 60 ahci-test /x86_64/ahci/io/ncq/retry
==8587==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 61 ahci-test /x86_64/ahci/flush/simple
==8593==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 62 ahci-test /x86_64/ahci/flush/retry
==8599==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8604==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 63 ahci-test /x86_64/ahci/flush/migrate
==8613==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8618==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 64 ahci-test /x86_64/ahci/migrate/sanity
==8628==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8633==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 65 ahci-test /x86_64/ahci/migrate/dma/simple
==8642==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8647==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 66 ahci-test /x86_64/ahci/migrate/dma/halted
==8656==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8661==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 67 ahci-test /x86_64/ahci/migrate/ncq/simple
==8670==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8675==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 68 ahci-test /x86_64/ahci/migrate/ncq/halted
==8684==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 69 ahci-test /x86_64/ahci/cdrom/eject
==8689==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 70 ahci-test /x86_64/ahci/cdrom/dma/single
==8695==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 71 ahci-test /x86_64/ahci/cdrom/dma/multi
==8701==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 72 ahci-test /x86_64/ahci/cdrom/pio/single
==8707==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
==8707==WARNING: ASan is ignoring requested __asan_handle_no_return: stack top: 0x7ffe55ad3000; bottom 0x7f5bc4154000; size: 0x00a29197f000 (698227355648)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
PASS 73 ahci-test /x86_64/ahci/cdrom/pio/multi
==8713==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 74 ahci-test /x86_64/ahci/cdrom/pio/bcl
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/hd-geo-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="hd-geo-test"
PASS 1 hd-geo-test /x86_64/hd-geo/ide/none
==8727==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 hd-geo-test /x86_64/hd-geo/ide/drive/cd_0
==8733==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 hd-geo-test /x86_64/hd-geo/ide/drive/mbr/blank
==8739==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 hd-geo-test /x86_64/hd-geo/ide/drive/mbr/lba
==8745==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 5 hd-geo-test /x86_64/hd-geo/ide/drive/mbr/chs
==8751==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 6 hd-geo-test /x86_64/hd-geo/ide/device/mbr/blank
==8757==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 7 hd-geo-test /x86_64/hd-geo/ide/device/mbr/lba
==8763==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 8 hd-geo-test /x86_64/hd-geo/ide/device/mbr/chs
==8769==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 9 hd-geo-test /x86_64/hd-geo/ide/device/user/chs
==8774==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 10 hd-geo-test /x86_64/hd-geo/ide/device/user/chst
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/boot-order-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="boot-order-test"
PASS 1 boot-order-test /x86_64/boot-order/pc
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8842==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP'
Using expected file 'tests/data/acpi/pc/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8848==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/q35/FACP'
Using expected file 'tests/data/acpi/q35/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8854==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP.bridge'
Looking for expected file 'tests/data/acpi/pc/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8860==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP.ipmikcs'
Looking for expected file 'tests/data/acpi/pc/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8866==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP.cphp'
Looking for expected file 'tests/data/acpi/pc/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8873==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP.memhp'
Looking for expected file 'tests/data/acpi/pc/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8879==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP.numamem'
Looking for expected file 'tests/data/acpi/pc/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8885==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/pc/FACP.dimmpxm'
Looking for expected file 'tests/data/acpi/pc/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8894==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/q35/FACP.bridge'
Looking for expected file 'tests/data/acpi/q35/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8900==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/q35/FACP.mmio64'
Looking for expected file 'tests/data/acpi/q35/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8906==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/q35/FACP.ipmibt'
Looking for expected file 'tests/data/acpi/q35/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8912==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/q35/FACP.cphp'
Looking for expected file 'tests/data/acpi/q35/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8919==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/q35/FACP.memhp'
Looking for expected file 'tests/data/acpi/q35/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8925==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/q35/FACP.numamem'
Looking for expected file 'tests/data/acpi/q35/FACP'
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==8931==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Looking for expected file 'tests/data/acpi/q35/FACP.dimmpxm'
Looking for expected file 'tests/data/acpi/q35/FACP'
---
PASS 1 i440fx-test /x86_64/i440fx/defaults
PASS 2 i440fx-test /x86_64/i440fx/pam
PASS 3 i440fx-test /x86_64/i440fx/firmware/bios
==9015==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 i440fx-test /x86_64/i440fx/firmware/pflash
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/fw_cfg-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="fw_cfg-test"
PASS 1 fw_cfg-test /x86_64/fw_cfg/signature
---
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/drive_del-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="drive_del-test"
PASS 1 drive_del-test /x86_64/drive_del/without-dev
PASS 2 drive_del-test /x86_64/drive_del/after_failed_device_add
==9103==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 drive_del-test /x86_64/blockdev/drive_del_device_del
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/wdt_ib700-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="wdt_ib700-test"
PASS 1 wdt_ib700-test /x86_64/wdt_ib700/pause
---
PASS 1 usb-hcd-uhci-test /x86_64/uhci/pci/init
PASS 2 usb-hcd-uhci-test /x86_64/uhci/pci/port1
PASS 3 usb-hcd-uhci-test /x86_64/uhci/pci/hotplug
==9298==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 usb-hcd-uhci-test /x86_64/uhci/pci/hotplug/usb-storage
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/usb-hcd-xhci-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="usb-hcd-xhci-test"
PASS 1 usb-hcd-xhci-test /x86_64/xhci/pci/init
PASS 2 usb-hcd-xhci-test /x86_64/xhci/pci/hotplug
==9307==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 usb-hcd-xhci-test /x86_64/xhci/pci/hotplug/usb-uas
PASS 4 usb-hcd-xhci-test /x86_64/xhci/pci/hotplug/usb-ccid
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/cpu-plug-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="cpu-plug-test"
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9413==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 1 vmgenid-test /x86_64/vmgenid/vmgenid/set-guid
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9419==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 vmgenid-test /x86_64/vmgenid/vmgenid/set-guid-auto
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9425==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 vmgenid-test /x86_64/vmgenid/vmgenid/query-monitor
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/tpm-crb-swtpm-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="tpm-crb-swtpm-test"
SKIP 1 tpm-crb-swtpm-test /x86_64/tpm/crb-swtpm/test # SKIP swtpm not in PATH or missing --tpm2 support
---
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9530==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9535==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 3 migration-test /x86_64/migration/fd_proto
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9543==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9548==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 4 migration-test /x86_64/migration/postcopy/unix
PASS 5 migration-test /x86_64/migration/postcopy/recovery
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9578==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9583==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 6 migration-test /x86_64/migration/precopy/unix
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9592==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9597==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 7 migration-test /x86_64/migration/precopy/tcp
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9606==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
==9611==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 8 migration-test /x86_64/migration/xbzrle/unix
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/test-x86-cpuid-compat -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="test-x86-cpuid-compat"
PASS 1 test-x86-cpuid-compat /x86/cpuid/parsing-plus-minus
---
PASS 6 numa-test /x86_64/numa/pc/dynamic/cpu
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/qmp-test -m=quick -k --tap < /dev/null | ./scripts/tap-driver.pl --test-name="qmp-test"
PASS 1 qmp-test /x86_64/qmp/protocol
==9940==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 2 qmp-test /x86_64/qmp/oob
PASS 3 qmp-test /x86_64/qmp/preconfig
PASS 4 qmp-test /x86_64/qmp/missing-any-arg
---
PASS 6 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/sdhci-pci/sdhci/sdhci-tests/registers
PASS 7 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/tpci200/ipack/ipoctal232/ipoctal232-tests/nop
PASS 8 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/tpci200/pci-device/pci-device-tests/nop
==10349==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 9 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-9p-pci/pci-device/pci-device-tests/nop
PASS 10 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-9p-pci/virtio/virtio-tests/nop
PASS 11 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-9p-pci/virtio-9p/virtio-9p-tests/config
---
PASS 20 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-9p-pci/virtio-9p/virtio-9p-tests/fs/flush/ignored
PASS 21 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-balloon-pci/pci-device/pci-device-tests/nop
PASS 22 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-balloon-pci/virtio/virtio-tests/nop
==10362==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 23 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-blk-pci/virtio-blk/virtio-blk-tests/indirect
==10369==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 24 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-blk-pci/virtio-blk/virtio-blk-tests/config
==10376==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 25 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-blk-pci/virtio-blk/virtio-blk-tests/basic
==10383==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 26 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-blk-pci/virtio-blk/virtio-blk-tests/resize
==10390==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 27 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-blk-pci/virtio-blk-pci-tests/msix
==10397==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 28 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-blk-pci/virtio-blk-pci-tests/idx
==10404==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 29 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-blk-pci/virtio-blk-pci-tests/nxvirtq
==10411==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 30 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-blk-pci/virtio-blk-pci-tests/hotplug
PASS 31 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-net-pci/virtio-net/virtio-net-tests/basic
PASS 32 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-net-pci/virtio-net/virtio-net-tests/rx_stop_cont
---
PASS 40 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-rng-pci/pci-device/pci-device-tests/nop
PASS 41 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-rng-pci/virtio/virtio-tests/nop
PASS 42 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-rng-pci/virtio-rng-pci-tests/hotplug
==10522==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 43 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-scsi-pci/pci-device/pci-device-tests/nop
==10528==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 44 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-scsi-pci/virtio-scsi/virtio-scsi-tests/hotplug
==10534==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 45 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-scsi-pci/virtio-scsi/virtio-scsi-tests/unaligned-write-same
==10540==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 46 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-scsi-pci/virtio-scsi-pci-tests/iothread-attach-node
PASS 47 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-serial-pci/pci-device/pci-device-tests/nop
PASS 48 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-serial-pci/virtio/virtio-tests/nop
---
PASS 67 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/i82562/pci-device/pci-device-tests/nop
PASS 68 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/i82801/pci-device/pci-device-tests/nop
PASS 69 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/ES1370/pci-device/pci-device-tests/nop
==10685==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 70 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/megasas/pci-device/pci-device-tests/nop
PASS 71 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/megasas/megasas-tests/dcmd/pd-get-info/fuzz
PASS 72 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/ne2k_pci/pci-device/pci-device-tests/nop
PASS 73 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/nvme/pci-device/pci-device-tests/nop
==10697==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 74 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/nvme/nvme-tests/oob-cmb-access
==10703==WARNING: ASan doesn't fully support makecontext/swapcontext functions and may produce false positives in some cases!
PASS 75 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/pcnet/pci-device/pci-device-tests/nop
PASS 76 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/pci-ohci/pci-device/pci-device-tests/nop
PASS 77 qos-test /x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/pci-ohci/pci-ohci-tests/ohci_pci-test-hotplug
The full log is available at
http://patchew.org/logs/20190801173900.23851-1-mreitz@redhat.com/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas
2019-08-01 17:38 [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas Max Reitz
` (2 preceding siblings ...)
2019-08-01 23:36 ` [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas no-reply
@ 2019-08-02 13:34 ` Kevin Wolf
2019-08-02 13:50 ` Max Reitz
2019-08-05 15:36 ` Max Reitz
4 siblings, 1 reply; 8+ messages in thread
From: Kevin Wolf @ 2019-08-02 13:34 UTC (permalink / raw)
To: Max Reitz
Cc: peter.maydell, Vladimir Sementsov-Ogievskiy, qemu-block,
qemu-devel, qemu-stable, John Snow
Am 01.08.2019 um 19:38 hat Max Reitz geschrieben:
> Hi,
>
> In a discussion with Vladimir today, we noticed that the backup job
> currently is pretty broken when using copy offloading. I don’t know
> about you, but my local filesystem (XFS) supports copy offloading, so
> the job uses it automatically. That means, that backup is broken and
> has been broken for a year on my local FS.
>
> The last working version was 2.12, so this isn’t a regression in 4.1.
> We could thus justify moving it to 4.2. But I think this should really
> go into 4.1, because this is not really an edge case and as far as I
> know users cannot do anything to prevent the backup job from performing
> copy offloading if the system and all involved block drivers support it.
> I just wonder why nobody has noticed...
This sounds bad indeed. But are we already going to have an -rc4 for
other reasons, or would this mean to have one only for the backup fix?
Also, if you say this was broken in 4.0, Cc: qemu-stable
Kevin
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas
2019-08-02 13:34 ` Kevin Wolf
@ 2019-08-02 13:50 ` Max Reitz
0 siblings, 0 replies; 8+ messages in thread
From: Max Reitz @ 2019-08-02 13:50 UTC (permalink / raw)
To: Kevin Wolf
Cc: peter.maydell, Vladimir Sementsov-Ogievskiy, qemu-block,
qemu-devel, qemu-stable, John Snow
[-- Attachment #1.1: Type: text/plain, Size: 1247 bytes --]
On 02.08.19 15:34, Kevin Wolf wrote:
> Am 01.08.2019 um 19:38 hat Max Reitz geschrieben:
>> Hi,
>>
>> In a discussion with Vladimir today, we noticed that the backup job
>> currently is pretty broken when using copy offloading. I don’t know
>> about you, but my local filesystem (XFS) supports copy offloading, so
>> the job uses it automatically. That means, that backup is broken and
>> has been broken for a year on my local FS.
>>
>> The last working version was 2.12, so this isn’t a regression in 4.1.
>> We could thus justify moving it to 4.2. But I think this should really
>> go into 4.1, because this is not really an edge case and as far as I
>> know users cannot do anything to prevent the backup job from performing
>> copy offloading if the system and all involved block drivers support it.
>> I just wonder why nobody has noticed...
>
> This sounds bad indeed. But are we already going to have an -rc4 for
> other reasons, or would this mean to have one only for the backup fix?
Looks like we are going to have an rc4 in any case because of the slirp
submodule.
> Also, if you say this was broken in 4.0, Cc: qemu-stable
Oh, right. I have been forgetting that for quite a while now.
Max
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas
2019-08-01 17:38 [Qemu-devel] [PATCH v2 for-4.1 0/2] backup: Copy only dirty areas Max Reitz
` (3 preceding siblings ...)
2019-08-02 13:34 ` Kevin Wolf
@ 2019-08-05 15:36 ` Max Reitz
4 siblings, 0 replies; 8+ messages in thread
From: Max Reitz @ 2019-08-05 15:36 UTC (permalink / raw)
To: qemu-block
Cc: Kevin Wolf, Vladimir Sementsov-Ogievskiy, John Snow, qemu-devel
[-- Attachment #1.1: Type: text/plain, Size: 929 bytes --]
On 01.08.19 19:38, Max Reitz wrote:
> Hi,
>
> In a discussion with Vladimir today, we noticed that the backup job
> currently is pretty broken when using copy offloading. I don’t know
> about you, but my local filesystem (XFS) supports copy offloading, so
> the job uses it automatically. That means, that backup is broken and
> has been broken for a year on my local FS.
>
> The last working version was 2.12, so this isn’t a regression in 4.1.
> We could thus justify moving it to 4.2. But I think this should really
> go into 4.1, because this is not really an edge case and as far as I
> know users cannot do anything to prevent the backup job from performing
> copy offloading if the system and all involved block drivers support it.
> I just wonder why nobody has noticed...
Thanks for the review, applied to my block branch:
https://git.xanclic.moe/XanClic/qemu/commits/branch/block
Max
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread