From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: Niek Linnenbank <nieklinnenbank@gmail.com>, qemu-devel@nongnu.org
Cc: b.galvani@gmail.com, peter.maydell@linaro.org, qemu-arm@nongnu.org
Subject: Re: [PATCH 01/10] hw: arm: add Allwinner H3 System-on-Chip
Date: Tue, 10 Dec 2019 10:02:41 +0100 [thread overview]
Message-ID: <70e9d4e8-49fb-02f9-23b4-d7cbf6e55eac@redhat.com> (raw)
In-Reply-To: <20191202210947.3603-2-nieklinnenbank@gmail.com>
On 12/2/19 10:09 PM, Niek Linnenbank wrote:
> The Allwinner H3 is a System on Chip containing four ARM Cortex A7
> processor cores. Features and specifications include DDR2/DDR3 memory,
> SD/MMC storage cards, 10/100/1000Mbit ethernet, USB 2.0, HDMI and
> various I/O modules. This commit adds support for the Allwinner H3
> System on Chip.
>
> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
> ---
[...]
> +
> + /* UART */
> + if (serial_hd(0)) {
As the uart0 is always mapped in the SoC, don't use 'if serial_hd()',
instead map it regardless a console is connected.
> + serial_mm_init(get_system_memory(), AW_H3_UART0_REG_BASE, 2,
> + s->irq[AW_H3_GIC_SPI_UART0], 115200, serial_hd(0),
> + DEVICE_NATIVE_ENDIAN);
> + }
> +
> + /* Unimplemented devices */
> + create_unimplemented_device("display-engine", AW_H3_DE_BASE, AW_H3_DE_SIZE);
> + create_unimplemented_device("dma", AW_H3_DMA_BASE, AW_H3_DMA_SIZE);
> + create_unimplemented_device("lcd0", AW_H3_LCD0_BASE, AW_H3_LCD0_SIZE);
> + create_unimplemented_device("lcd1", AW_H3_LCD1_BASE, AW_H3_LCD1_SIZE);
> + create_unimplemented_device("gpu", AW_H3_GPU_BASE, AW_H3_GPU_SIZE);
> + create_unimplemented_device("hdmi", AW_H3_HDMI_BASE, AW_H3_HDMI_SIZE);
> + create_unimplemented_device("rtc", AW_H3_RTC_BASE, AW_H3_RTC_SIZE);
> + create_unimplemented_device("audio-codec", AW_H3_AC_BASE, AW_H3_AC_SIZE);
next prev parent reply other threads:[~2019-12-10 9:03 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-02 21:09 [PATCH 00/10] Add Allwinner H3 SoC and Orange Pi PC Machine Niek Linnenbank
2019-12-02 21:09 ` [PATCH 01/10] hw: arm: add Allwinner H3 System-on-Chip Niek Linnenbank
2019-12-04 16:53 ` Philippe Mathieu-Daudé
2019-12-04 20:44 ` Niek Linnenbank
2019-12-10 9:02 ` Philippe Mathieu-Daudé [this message]
2019-12-10 19:17 ` Niek Linnenbank
2019-12-02 21:09 ` [PATCH 02/10] hw: arm: add Xunlong Orange Pi PC machine Niek Linnenbank
2019-12-03 9:17 ` Philippe Mathieu-Daudé
2019-12-03 19:33 ` Niek Linnenbank
2019-12-04 9:03 ` Philippe Mathieu-Daudé
2019-12-04 19:50 ` Niek Linnenbank
2019-12-05 22:15 ` Niek Linnenbank
2019-12-06 5:41 ` Philippe Mathieu-Daudé
2019-12-06 22:15 ` Niek Linnenbank
2019-12-10 8:59 ` Philippe Mathieu-Daudé
2019-12-10 19:14 ` Niek Linnenbank
2019-12-02 21:09 ` [PATCH 03/10] arm: allwinner-h3: add Clock Control Unit Niek Linnenbank
2019-12-13 0:03 ` Philippe Mathieu-Daudé
2019-12-02 21:09 ` [PATCH 04/10] arm: allwinner-h3: add USB host controller Niek Linnenbank
2019-12-04 16:11 ` Aleksandar Markovic
2019-12-04 20:20 ` Niek Linnenbank
2019-12-10 7:56 ` Philippe Mathieu-Daudé
2019-12-10 8:29 ` Gerd Hoffmann
2019-12-10 19:11 ` Niek Linnenbank
2019-12-02 21:09 ` [PATCH 05/10] arm: allwinner-h3: add System Control module Niek Linnenbank
2019-12-13 0:09 ` Philippe Mathieu-Daudé
2019-12-15 23:27 ` Niek Linnenbank
2019-12-16 0:17 ` Philippe Mathieu-Daudé
2019-12-02 21:09 ` [PATCH 06/10] arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on() Niek Linnenbank
2019-12-06 14:24 ` Peter Maydell
2019-12-06 20:01 ` Niek Linnenbank
2019-12-13 20:52 ` Niek Linnenbank
2019-12-02 21:09 ` [PATCH 07/10] arm: allwinner-h3: add CPU Configuration module Niek Linnenbank
2019-12-02 21:09 ` [PATCH 08/10] arm: allwinner-h3: add Security Identifier device Niek Linnenbank
2019-12-06 14:27 ` Peter Maydell
2019-12-06 16:35 ` Philippe Mathieu-Daudé
2019-12-06 20:20 ` Niek Linnenbank
2019-12-02 21:09 ` [PATCH 09/10] arm: allwinner-h3: add SD/MMC host controller Niek Linnenbank
2019-12-11 22:34 ` Niek Linnenbank
2019-12-12 23:56 ` Philippe Mathieu-Daudé
2019-12-13 21:00 ` Niek Linnenbank
2019-12-14 13:59 ` Philippe Mathieu-Daudé
2019-12-14 20:32 ` Niek Linnenbank
2019-12-15 23:07 ` Niek Linnenbank
2019-12-16 0:14 ` Philippe Mathieu-Daudé
2019-12-16 19:46 ` Niek Linnenbank
2019-12-16 21:28 ` Philippe Mathieu-Daudé
2019-12-02 21:09 ` [PATCH 10/10] arm: allwinner-h3: add EMAC ethernet device Niek Linnenbank
2019-12-03 9:33 ` KONRAD Frederic
2019-12-03 19:41 ` Niek Linnenbank
2019-12-04 15:14 ` Philippe Mathieu-Daudé
2019-12-04 15:22 ` KONRAD Frederic
2019-12-03 8:47 ` [PATCH 00/10] Add Allwinner H3 SoC and Orange Pi PC Machine Philippe Mathieu-Daudé
2019-12-03 19:25 ` Niek Linnenbank
2019-12-10 8:40 ` Philippe Mathieu-Daudé
2019-12-09 21:37 ` Niek Linnenbank
2019-12-10 8:26 ` Philippe Mathieu-Daudé
2019-12-10 20:12 ` Niek Linnenbank
2019-12-12 23:07 ` Niek Linnenbank
2019-12-12 23:25 ` Philippe Mathieu-Daudé
2019-12-13 20:45 ` Niek Linnenbank
2019-12-03 9:02 ` Philippe Mathieu-Daudé
2019-12-03 19:32 ` Niek Linnenbank
2019-12-06 14:16 ` Peter Maydell
2019-12-09 22:24 ` Aleksandar Markovic
2019-12-10 10:34 ` KONRAD Frederic
2019-12-10 19:55 ` Niek Linnenbank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=70e9d4e8-49fb-02f9-23b4-d7cbf6e55eac@redhat.com \
--to=philmd@redhat.com \
--cc=b.galvani@gmail.com \
--cc=nieklinnenbank@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).