From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: Xiaojuan Yang <yangxiaojuan@loongson.cn>, qemu-devel@nongnu.org
Cc: richard.henderson@linaro.org, gaosong@loongson.cn,
maobibo@loongson.cn, f4bug@amsat.org
Subject: Re: [PATCH v7 1/2] hw/intc: Convert the memops to with_attrs in LoongArch extioi
Date: Thu, 20 Oct 2022 11:58:53 +0200 [thread overview]
Message-ID: <76141647-24f4-c57a-de12-821fb3567e90@linaro.org> (raw)
In-Reply-To: <20221020090455.2371099-2-yangxiaojuan@loongson.cn>
On 20/10/22 11:04, Xiaojuan Yang wrote:
> Converting the MemoryRegionOps read/write handlers to
> with_attrs in LoongArch extioi emulation.
>
> Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
> ---
> hw/intc/loongarch_extioi.c | 32 +++++++++++++++++---------------
> hw/intc/trace-events | 3 +--
> target/loongarch/iocsr_helper.c | 18 ++++++++++--------
> 3 files changed, 28 insertions(+), 25 deletions(-)
>
> diff --git a/hw/intc/loongarch_extioi.c b/hw/intc/loongarch_extioi.c
> index 22803969bc..16f2261844 100644
> --- a/hw/intc/loongarch_extioi.c
> +++ b/hw/intc/loongarch_extioi.c
> @@ -17,7 +17,6 @@
> #include "migration/vmstate.h"
> #include "trace.h"
>
> -
> static void extioi_update_irq(LoongArchExtIOI *s, int irq, int level)
> {
> int ipnum, cpu, found, irq_index, irq_mask;
> @@ -68,44 +67,45 @@ static void extioi_setirq(void *opaque, int irq, int level)
> extioi_update_irq(s, irq, level);
> }
>
> -static uint64_t extioi_readw(void *opaque, hwaddr addr, unsigned size)
> +static MemTxResult extioi_readw(void *opaque, hwaddr addr, uint64_t *data,
> + unsigned size, MemTxAttrs attrs)
> {
> LoongArchExtIOI *s = LOONGARCH_EXTIOI(opaque);
> unsigned long offset = addr & 0xffff;
> - uint32_t index, cpu, ret = 0;
> + uint32_t index, cpu;
>
> switch (offset) {
> case EXTIOI_NODETYPE_START ... EXTIOI_NODETYPE_END - 1:
> index = (offset - EXTIOI_NODETYPE_START) >> 2;
> - ret = s->nodetype[index];
> + *data = s->nodetype[index];
> break;
> case EXTIOI_IPMAP_START ... EXTIOI_IPMAP_END - 1:
> index = (offset - EXTIOI_IPMAP_START) >> 2;
> - ret = s->ipmap[index];
> + *data = s->ipmap[index];
> break;
> case EXTIOI_ENABLE_START ... EXTIOI_ENABLE_END - 1:
> index = (offset - EXTIOI_ENABLE_START) >> 2;
> - ret = s->enable[index];
> + *data = s->enable[index];
> break;
> case EXTIOI_BOUNCE_START ... EXTIOI_BOUNCE_END - 1:
> index = (offset - EXTIOI_BOUNCE_START) >> 2;
> - ret = s->bounce[index];
> + *data = s->bounce[index];
> break;
> case EXTIOI_COREISR_START ... EXTIOI_COREISR_END - 1:
> index = ((offset - EXTIOI_COREISR_START) & 0x1f) >> 2;
> cpu = ((offset - EXTIOI_COREISR_START) >> 8) & 0x3;
> - ret = s->coreisr[cpu][index];
> + *data = s->coreisr[cpu][index];
> break;
> case EXTIOI_COREMAP_START ... EXTIOI_COREMAP_END - 1:
> index = (offset - EXTIOI_COREMAP_START) >> 2;
> - ret = s->coremap[index];
> + *data = s->coremap[index];
> break;
> default:
> break;
> }
>
> - trace_loongarch_extioi_readw(addr, ret);
> - return ret;
> + trace_loongarch_extioi_readw(addr, *data);
> + return MEMTX_OK;
> }
>
> static inline void extioi_enable_irq(LoongArchExtIOI *s, int index,\
> @@ -127,8 +127,9 @@ static inline void extioi_enable_irq(LoongArchExtIOI *s, int index,\
> }
> }
>
> -static void extioi_writew(void *opaque, hwaddr addr,
> - uint64_t val, unsigned size)
> +static MemTxResult extioi_writew(void *opaque, hwaddr addr,
> + uint64_t val, unsigned size,
> + MemTxAttrs attrs)
> {
> LoongArchExtIOI *s = LOONGARCH_EXTIOI(opaque);
> int i, cpu, index, old_data, irq;
> @@ -231,11 +232,12 @@ static void extioi_writew(void *opaque, hwaddr addr,
> default:
> break;
> }
> + return MEMTX_OK;
> }
>
> static const MemoryRegionOps extioi_ops = {
> - .read = extioi_readw,
> - .write = extioi_writew,
> + .read_with_attrs = extioi_readw,
> + .write_with_attrs = extioi_writew,
> .impl.min_access_size = 4,
> .impl.max_access_size = 4,
> .valid.min_access_size = 4,
> diff --git a/hw/intc/trace-events b/hw/intc/trace-events
> index 0a90c1cdec..6fbc2045e6 100644
> --- a/hw/intc/trace-events
> +++ b/hw/intc/trace-events
> @@ -306,6 +306,5 @@ loongarch_msi_set_irq(int irq_num) "set msi irq %d"
>
> # loongarch_extioi.c
> loongarch_extioi_setirq(int irq, int level) "set extirq irq %d level %d"
> -loongarch_extioi_readw(uint64_t addr, uint32_t val) "addr: 0x%"PRIx64 "val: 0x%x"
> +loongarch_extioi_readw(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64
> loongarch_extioi_writew(uint64_t addr, uint64_t val) "addr: 0x%"PRIx64 "val: 0x%" PRIx64
> -
Thanks for splitting. Up to here is the first patch, for it:
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now what follows belongs to the next patch:
> diff --git a/target/loongarch/iocsr_helper.c b/target/loongarch/iocsr_helper.c
> index 0e9c537dc7..dd34bb54e6 100644
> --- a/target/loongarch/iocsr_helper.c
> +++ b/target/loongarch/iocsr_helper.c
> @@ -14,54 +14,56 @@
> #include "exec/cpu_ldst.h"
> #include "tcg/tcg-ldst.h"
>
> +#define GET_MEMTXATTRS(cs) ((MemTxAttrs) {.requester_id = cs->cpu_index})
Note, you could move the env_cpu() call to the macro to simplify:
#define GET_MEMTXATTRS(cas) \
((MemTxAttrs){.requester_id = env_cpu(cas)->cpu_index})
> +
> uint64_t helper_iocsrrd_b(CPULoongArchState *env, target_ulong r_addr)
> {
> return address_space_ldub(&env->address_space_iocsr, r_addr,
> - MEMTXATTRS_UNSPECIFIED, NULL);
> + GET_MEMTXATTRS(env_cpu(env)), NULL);
> }
>
> uint64_t helper_iocsrrd_h(CPULoongArchState *env, target_ulong r_addr)
> {
> return address_space_lduw(&env->address_space_iocsr, r_addr,
> - MEMTXATTRS_UNSPECIFIED, NULL);
> + GET_MEMTXATTRS(env_cpu(env)), NULL);
> }
>
> uint64_t helper_iocsrrd_w(CPULoongArchState *env, target_ulong r_addr)
> {
> return address_space_ldl(&env->address_space_iocsr, r_addr,
> - MEMTXATTRS_UNSPECIFIED, NULL);
> + GET_MEMTXATTRS(env_cpu(env)), NULL);
> }
>
> uint64_t helper_iocsrrd_d(CPULoongArchState *env, target_ulong r_addr)
> {
> return address_space_ldq(&env->address_space_iocsr, r_addr,
> - MEMTXATTRS_UNSPECIFIED, NULL);
> + GET_MEMTXATTRS(env_cpu(env)), NULL);
> }
>
> void helper_iocsrwr_b(CPULoongArchState *env, target_ulong w_addr,
> target_ulong val)
> {
> address_space_stb(&env->address_space_iocsr, w_addr,
> - val, MEMTXATTRS_UNSPECIFIED, NULL);
> + val, GET_MEMTXATTRS(env_cpu(env)), NULL);
> }
>
> void helper_iocsrwr_h(CPULoongArchState *env, target_ulong w_addr,
> target_ulong val)
> {
> address_space_stw(&env->address_space_iocsr, w_addr,
> - val, MEMTXATTRS_UNSPECIFIED, NULL);
> + val, GET_MEMTXATTRS(env_cpu(env)), NULL);
> }
>
> void helper_iocsrwr_w(CPULoongArchState *env, target_ulong w_addr,
> target_ulong val)
> {
> address_space_stl(&env->address_space_iocsr, w_addr,
> - val, MEMTXATTRS_UNSPECIFIED, NULL);
> + val, GET_MEMTXATTRS(env_cpu(env)), NULL);
> }
>
> void helper_iocsrwr_d(CPULoongArchState *env, target_ulong w_addr,
> target_ulong val)
> {
> address_space_stq(&env->address_space_iocsr, w_addr,
> - val, MEMTXATTRS_UNSPECIFIED, NULL);
> + val, GET_MEMTXATTRS(env_cpu(env)), NULL);
> }
next prev parent reply other threads:[~2022-10-20 10:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-20 9:04 [PATCH v7 0/2] Fix LoongArch extioi coreisr accessing Xiaojuan Yang
2022-10-20 9:04 ` [PATCH v7 1/2] hw/intc: Convert the memops to with_attrs in LoongArch extioi Xiaojuan Yang
2022-10-20 9:58 ` Philippe Mathieu-Daudé [this message]
2022-10-20 9:04 ` [PATCH v7 2/2] hw/intc: Fix LoongArch extioi coreisr accessing Xiaojuan Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=76141647-24f4-c57a-de12-821fb3567e90@linaro.org \
--to=philmd@linaro.org \
--cc=f4bug@amsat.org \
--cc=gaosong@loongson.cn \
--cc=maobibo@loongson.cn \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=yangxiaojuan@loongson.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).