From: Richard Henderson <richard.henderson@linaro.org>
To: "Philippe Mathieu-Daudé" <philmd@linaro.org>, qemu-devel@nongnu.org
Cc: alex.bennee@linaro.org
Subject: Re: [PATCH v5 17/36] tcg: Split out tcg_gen_nonatomic_cmpxchg_i{32,64}
Date: Thu, 26 Jan 2023 20:44:10 -1000 [thread overview]
Message-ID: <79c17cc8-f45d-391f-88db-8d74d32829ef@linaro.org> (raw)
In-Reply-To: <abb025a0-8588-81b3-ddd3-a93b4b66f6f5@linaro.org>
On 1/26/23 14:53, Philippe Mathieu-Daudé wrote:
> On 26/1/23 05:38, Richard Henderson wrote:
>> Normally this is automatically handled by the CF_PARALLEL checks
>> with in tcg_gen_atomic_cmpxchg_i{32,64}, but x86 has a special
>> case of !PREFIX_LOCK where it always wants the non-atomic version.
>>
>> Split these out so that x86 does not have to roll its own.
>>
>> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
>> ---
>> include/tcg/tcg-op.h | 4 ++
>> tcg/tcg-op.c | 154 +++++++++++++++++++++++++++----------------
>> 2 files changed, 101 insertions(+), 57 deletions(-)
>
>
>> +void tcg_gen_nonatomic_cmpxchg_i64(TCGv_i64 retv, TCGv addr, TCGv_i64 cmpv,
>> + TCGv_i64 newv, TCGArg idx, MemOp memop)
>> +{
>> + TCGv_i64 t1, t2;
>> +
>
> This block from here ...
>
>> + if (TCG_TARGET_REG_BITS == 32 && (memop & MO_SIZE) < MO_64) {
>> + tcg_gen_nonatomic_cmpxchg_i32(TCGV_LOW(retv), addr, TCGV_LOW(cmpv),
>> + TCGV_LOW(newv), idx, memop);
>> + if (memop & MO_SIGN) {
>> + tcg_gen_sari_i32(TCGV_HIGH(retv), TCGV_LOW(retv), 31);
>> + } else {
>> + tcg_gen_movi_i32(TCGV_HIGH(retv), 0);
>> + }
>> + return;
>> + }
>
> ... to here,
>
>> + t1 = tcg_temp_new_i64();
>> + t2 = tcg_temp_new_i64();
>> +
>> + tcg_gen_ext_i64(t2, cmpv, memop & MO_SIZE);
>> +
>> + tcg_gen_qemu_ld_i64(t1, addr, idx, memop & ~MO_SIGN);
>> + tcg_gen_movcond_i64(TCG_COND_EQ, t2, t1, t2, newv, t1);
>> + tcg_gen_qemu_st_i64(t2, addr, idx, memop);
>> + tcg_temp_free_i64(t2);
>> +
>> + if (memop & MO_SIGN) {
>> + tcg_gen_ext_i64(retv, t1, memop);
>> + } else {
>> + tcg_gen_mov_i64(retv, t1);
>> + }
>> + tcg_temp_free_i64(t1);
>> }
>> void tcg_gen_atomic_cmpxchg_i64(TCGv_i64 retv, TCGv addr, TCGv_i64 cmpv,
>> TCGv_i64 newv, TCGArg idx, MemOp memop)
>> {
>> - memop = tcg_canonicalize_memop(memop, 1, 0);
>> -
>> if (!(tcg_ctx->gen_tb->cflags & CF_PARALLEL)) {
>> - TCGv_i64 t1 = tcg_temp_new_i64();
>> - TCGv_i64 t2 = tcg_temp_new_i64();
>> + tcg_gen_nonatomic_cmpxchg_i64(retv, addr, cmpv, newv, idx, memop);
>> + return;
>> + }
>> - tcg_gen_ext_i64(t2, cmpv, memop & MO_SIZE);
>> -
>> - tcg_gen_qemu_ld_i64(t1, addr, idx, memop & ~MO_SIGN);
>> - tcg_gen_movcond_i64(TCG_COND_EQ, t2, t1, t2, newv, t1);
>> - tcg_gen_qemu_st_i64(t2, addr, idx, memop);
>> - tcg_temp_free_i64(t2);
>> -
>> - if (memop & MO_SIGN) {
>> - tcg_gen_ext_i64(retv, t1, memop);
>> - } else {
>> - tcg_gen_mov_i64(retv, t1);
>> - }
>> - tcg_temp_free_i64(t1);
>> - } else if ((memop & MO_SIZE) == MO_64) {
>> -#ifdef CONFIG_ATOMIC64
>> + if ((memop & MO_SIZE) == MO_64) {
>> gen_atomic_cx_i64 gen;
>> - MemOpIdx oi;
>> + memop = tcg_canonicalize_memop(memop, 1, 0);
>> gen = table_cmpxchg[memop & (MO_SIZE | MO_BSWAP)];
>> - tcg_debug_assert(gen != NULL);
>> + if (gen) {
>> + MemOpIdx oi = make_memop_idx(memop, idx);
>> + gen(retv, cpu_env, addr, cmpv, newv, tcg_constant_i32(oi));
>> + return;
>> + }
>> - oi = make_memop_idx(memop, idx);
>> - gen(retv, cpu_env, addr, cmpv, newv, tcg_constant_i32(oi));
>> -#else
>> gen_helper_exit_atomic(cpu_env);
>> - /* Produce a result, so that we have a well-formed opcode stream
>> - with respect to uses of the result in the (dead) code following. */
>> +
>> + /*
>> + * Produce a result for a well-formed opcode stream. This satisfies
>> + * liveness for set before used, which happens before this dead code
>> + * is removed.
>> + */
>> tcg_gen_movi_i64(retv, 0);
>> -#endif /* CONFIG_ATOMIC64 */
>> + return;
>> + }
>
> and this one here:
>> + if (TCG_TARGET_REG_BITS == 32) {
>> + tcg_gen_atomic_cmpxchg_i32(TCGV_LOW(retv), addr, TCGV_LOW(cmpv),
>> + TCGV_LOW(newv), idx, memop);
>> + if (memop & MO_SIGN) {
>> + tcg_gen_sari_i32(TCGV_HIGH(retv), TCGV_LOW(retv), 31);
>> + } else {
>> + tcg_gen_movi_i32(TCGV_HIGH(retv), 0);
>> + }
>
> belong to a subsequent patch IMO.
No. That code is in there now, and needs to be there for correctness.
It gets duplicated in the exposure of the non-atomic code path.
r~
Otherwise LGTM.
>
>> } else {
>> TCGv_i32 c32 = tcg_temp_new_i32();
>> TCGv_i32 n32 = tcg_temp_new_i32();
>
next prev parent reply other threads:[~2023-01-27 6:44 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-26 4:37 [PATCH v5 00/36] tcg: Support for Int128 with helpers Richard Henderson
2023-01-26 4:37 ` [PATCH v5 01/36] tcg: Define TCG_TYPE_I128 and related helper macros Richard Henderson
2023-01-26 4:37 ` [PATCH v5 02/36] tcg: Handle dh_typecode_i128 with TCG_CALL_{RET, ARG}_NORMAL Richard Henderson
2023-01-26 4:37 ` [PATCH v5 03/36] tcg: Allocate objects contiguously in temp_allocate_frame Richard Henderson
2023-01-26 17:12 ` Alex Bennée
2023-01-26 19:48 ` Richard Henderson
2023-01-26 4:37 ` [PATCH v5 04/36] tcg: Introduce tcg_out_addi_ptr Richard Henderson
2023-01-26 4:37 ` [PATCH v5 05/36] tcg: Add TCG_CALL_{RET,ARG}_BY_REF Richard Henderson
2023-01-27 10:40 ` Alex Bennée
2023-01-27 18:48 ` Richard Henderson
2023-01-26 4:37 ` [PATCH v5 06/36] tcg: Introduce tcg_target_call_oarg_reg Richard Henderson
2023-01-26 4:37 ` [PATCH v5 07/36] tcg: Add TCG_CALL_RET_BY_VEC Richard Henderson
2023-01-26 4:37 ` [PATCH v5 08/36] include/qemu/int128: Use Int128 structure for TCI Richard Henderson
2023-01-27 13:51 ` Alex Bennée
2023-01-26 4:37 ` [PATCH v5 09/36] tcg/i386: Add TCG_TARGET_CALL_{RET,ARG}_I128 Richard Henderson
2023-01-27 13:52 ` Alex Bennée
2023-01-26 4:37 ` [PATCH v5 10/36] tcg/tci: Fix big-endian return register ordering Richard Henderson
2023-01-27 13:53 ` Alex Bennée
2023-01-26 4:37 ` [PATCH v5 11/36] tcg/tci: Add TCG_TARGET_CALL_{RET,ARG}_I128 Richard Henderson
2023-01-27 14:00 ` Alex Bennée
2023-01-27 18:55 ` Richard Henderson
2023-01-26 4:38 ` [PATCH v5 12/36] tcg: " Richard Henderson
2023-01-27 17:04 ` Alex Bennée
2023-01-26 4:38 ` [PATCH v5 13/36] tcg: Add temp allocation for TCGv_i128 Richard Henderson
2023-01-27 17:08 ` Alex Bennée
2023-01-27 18:56 ` Richard Henderson
2023-01-26 4:38 ` [PATCH v5 14/36] tcg: Add basic data movement " Richard Henderson
2023-01-27 18:23 ` Alex Bennée
2023-01-26 4:38 ` [PATCH v5 15/36] tcg: Add guest load/store primitives " Richard Henderson
2023-01-26 4:38 ` [PATCH v5 16/36] tcg: Add tcg_gen_{non}atomic_cmpxchg_i128 Richard Henderson
2023-01-27 0:45 ` Philippe Mathieu-Daudé
2023-01-27 6:39 ` Richard Henderson
2023-01-27 23:49 ` Philippe Mathieu-Daudé
2023-01-26 4:38 ` [PATCH v5 17/36] tcg: Split out tcg_gen_nonatomic_cmpxchg_i{32,64} Richard Henderson
2023-01-27 0:53 ` Philippe Mathieu-Daudé
2023-01-27 6:44 ` Richard Henderson [this message]
2023-01-26 4:38 ` [PATCH v5 18/36] target/arm: Use tcg_gen_atomic_cmpxchg_i128 for STXP Richard Henderson
2023-01-26 4:38 ` [PATCH v5 19/36] target/arm: Use tcg_gen_atomic_cmpxchg_i128 for CASP Richard Henderson
2023-01-26 4:38 ` [PATCH v5 20/36] target/ppc: Use tcg_gen_atomic_cmpxchg_i128 for STQCX Richard Henderson
2023-01-26 4:38 ` [PATCH v5 21/36] tests/tcg/s390x: Add div.c Richard Henderson
2023-01-26 4:38 ` [PATCH v5 22/36] tests/tcg/s390x: Add clst.c Richard Henderson
2023-01-26 4:38 ` [PATCH v5 23/36] tests/tcg/s390x: Add long-double.c Richard Henderson
2023-01-26 4:38 ` [PATCH v5 24/36] target/s390x: Use a single return for helper_divs32/u32 Richard Henderson
2023-01-26 9:58 ` David Hildenbrand
2023-01-27 0:57 ` Philippe Mathieu-Daudé
2023-01-26 4:38 ` [PATCH v5 25/36] target/s390x: Use a single return for helper_divs64/u64 Richard Henderson
2023-01-26 4:38 ` [PATCH v5 26/36] target/s390x: Use Int128 for return from CLST Richard Henderson
2023-01-26 4:38 ` [PATCH v5 27/36] target/s390x: Use Int128 for return from CKSM Richard Henderson
2023-01-26 4:38 ` [PATCH v5 28/36] target/s390x: Use Int128 for return from TRE Richard Henderson
2023-01-26 4:38 ` [PATCH v5 29/36] target/s390x: Copy wout_x1 to wout_x1_P Richard Henderson
2023-01-26 4:38 ` [PATCH v5 30/36] target/s390x: Use Int128 for returning float128 Richard Henderson
2023-01-26 10:06 ` David Hildenbrand
2023-01-26 4:38 ` [PATCH v5 31/36] target/s390x: Use Int128 for passing float128 Richard Henderson
2023-01-26 11:19 ` David Hildenbrand
2023-01-26 4:38 ` [PATCH v5 32/36] target/s390x: Use tcg_gen_atomic_cmpxchg_i128 for CDSG Richard Henderson
2023-01-26 11:27 ` David Hildenbrand
2023-01-26 21:01 ` Richard Henderson
2023-01-27 16:09 ` David Hildenbrand
2023-01-26 4:38 ` [PATCH v5 33/36] target/s390x: Implement CC_OP_NZ in gen_op_calc_cc Richard Henderson
2023-01-26 11:25 ` David Hildenbrand
2023-01-26 4:38 ` [PATCH v5 34/36] target/i386: Split out gen_cmpxchg8b, gen_cmpxchg16b Richard Henderson
2023-01-26 4:38 ` [PATCH v5 35/36] target/i386: Inline cmpxchg8b Richard Henderson
2023-01-26 4:38 ` [PATCH v5 36/36] target/i386: Inline cmpxchg16b Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=79c17cc8-f45d-391f-88db-8d74d32829ef@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).