From: Wainer dos Santos Moschetta <wainersm@redhat.com>
To: "Cleber Rosa" <crosa@redhat.com>,
"Alex Bennée" <alex.bennee@linaro.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
qemu-devel@nongnu.org
Cc: "Fam Zheng" <fam@euphon.net>, "Thomas Huth" <thuth@redhat.com>,
"Daniel P . Berrangé" <berrange@redhat.com>,
"Eduardo Habkost" <ehabkost@redhat.com>,
"Erik Skultety" <eskultet@redhat.com>,
"Stefan Hajnoczi" <stefanha@gmail.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Willian Rampazzo" <willianr@redhat.com>,
"Willian Rampazzo" <wrampazz@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@redhat.com>,
"Beraldo Leal" <bleal@redhat.com>
Subject: Re: [PATCH v7 4/4] Jobs based on custom runners: add job definitions for QEMU's machines
Date: Wed, 30 Jun 2021 19:19:23 -0300 [thread overview]
Message-ID: <79f58e5b-3fa1-919f-6cda-5150ef2b7a43@redhat.com> (raw)
In-Reply-To: <20210630012619.115262-5-crosa@redhat.com>
On 6/29/21 10:26 PM, Cleber Rosa wrote:
> The QEMU project has two machines (aarch64 and s390x) that can be used
> for jobs that do build and run tests. This introduces those jobs,
> which are a mapping of custom scripts used for the same purpose.
>
> Signed-off-by: Cleber Rosa <crosa@redhat.com>
> Reviewed-by: Willian Rampazzo <willianr@redhat.com>
> ---
> .gitlab-ci.d/custom-runners.yml | 208 ++++++++++++++++++++++++++++++++
> 1 file changed, 208 insertions(+)
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
>
> diff --git a/.gitlab-ci.d/custom-runners.yml b/.gitlab-ci.d/custom-runners.yml
> index a07b27384c..061d3cdfed 100644
> --- a/.gitlab-ci.d/custom-runners.yml
> +++ b/.gitlab-ci.d/custom-runners.yml
> @@ -12,3 +12,211 @@
> # guarantees a fresh repository on each job run.
> variables:
> GIT_STRATEGY: clone
> +
> +# All ubuntu-18.04 jobs should run successfully in an environment
> +# setup by the scripts/ci/setup/build-environment.yml task
> +# "Install basic packages to build QEMU on Ubuntu 18.04/20.04"
> +ubuntu-18.04-s390x-all-linux-static:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_18.04
> + - s390x
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + script:
> + # --disable-libssh is needed because of https://bugs.launchpad.net/qemu/+bug/1838763
> + # --disable-glusterfs is needed because there's no static version of those libs in distro supplied packages
> + - mkdir build
> + - cd build
> + - ../configure --enable-debug --static --disable-system --disable-glusterfs --disable-libssh
> + - make --output-sync -j`nproc`
> + - make --output-sync -j`nproc` check V=1
> + - make --output-sync -j`nproc` check-tcg V=1
> +
> +ubuntu-18.04-s390x-all:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_18.04
> + - s390x
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + script:
> + - mkdir build
> + - cd build
> + - ../configure --disable-libssh
> + - make --output-sync -j`nproc`
> + - make --output-sync -j`nproc` check V=1
> +
> +ubuntu-18.04-s390x-alldbg:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_18.04
> + - s390x
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + script:
> + - mkdir build
> + - cd build
> + - ../configure --enable-debug --disable-libssh
> + - make clean
> + - make --output-sync -j`nproc`
> + - make --output-sync -j`nproc` check V=1
> +
> +ubuntu-18.04-s390x-clang:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_18.04
> + - s390x
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + when: manual
> + script:
> + - mkdir build
> + - cd build
> + - ../configure --disable-libssh --cc=clang --cxx=clang++ --enable-sanitizers
> + - make --output-sync -j`nproc`
> + - make --output-sync -j`nproc` check V=1
> +
> +ubuntu-18.04-s390x-tci:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_18.04
> + - s390x
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + script:
> + - mkdir build
> + - cd build
> + - ../configure --disable-libssh --enable-tcg-interpreter
> + - make --output-sync -j`nproc`
> +
> +ubuntu-18.04-s390x-notcg:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_18.04
> + - s390x
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + when: manual
> + script:
> + - mkdir build
> + - cd build
> + - ../configure --disable-libssh --disable-tcg
> + - make --output-sync -j`nproc`
> + - make --output-sync -j`nproc` check V=1
> +
> +# All ubuntu-20.04 jobs should run successfully in an environment
> +# setup by the scripts/ci/setup/qemu/build-environment.yml task
> +# "Install basic packages to build QEMU on Ubuntu 18.04/20.04"
> +ubuntu-20.04-aarch64-all-linux-static:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_20.04
> + - aarch64
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + script:
> + # --disable-libssh is needed because of https://bugs.launchpad.net/qemu/+bug/1838763
> + # --disable-glusterfs is needed because there's no static version of those libs in distro supplied packages
> + - mkdir build
> + - cd build
> + - ../configure --enable-debug --static --disable-system --disable-glusterfs --disable-libssh
> + - make --output-sync -j`nproc`
> + - make --output-sync -j`nproc` check V=1
> + - make --output-sync -j`nproc` check-tcg V=1
> +
> +ubuntu-20.04-aarch64-all:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_20.04
> + - aarch64
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + script:
> + - mkdir build
> + - cd build
> + - ../configure --disable-libssh
> + - make --output-sync -j`nproc`
> + - make --output-sync -j`nproc` check V=1
> +
> +ubuntu-20.04-aarch64-alldbg:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_20.04
> + - aarch64
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + script:
> + - mkdir build
> + - cd build
> + - ../configure --enable-debug --disable-libssh
> + - make clean
> + - make --output-sync -j`nproc`
> + - make --output-sync -j`nproc` check V=1
> +
> +ubuntu-20.04-aarch64-clang:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_20.04
> + - aarch64
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + when: manual
> + script:
> + - mkdir build
> + - cd build
> + - ../configure --disable-libssh --cc=clang-10 --cxx=clang++-10 --enable-sanitizers
> + - make --output-sync -j`nproc`
> + - make --output-sync -j`nproc` check V=1
> +
> +ubuntu-20.04-aarch64-tci:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_20.04
> + - aarch64
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + script:
> + - mkdir build
> + - cd build
> + - ../configure --disable-libssh --enable-tcg-interpreter
> + - make --output-sync -j`nproc`
> +
> +ubuntu-20.04-aarch64-notcg:
> + allow_failure: true
> + needs: []
> + stage: build
> + tags:
> + - ubuntu_20.04
> + - aarch64
> + rules:
> + - if: '$CI_COMMIT_BRANCH =~ /^staging/'
> + when: manual
> + script:
> + - mkdir build
> + - cd build
> + - ../configure --disable-libssh --disable-tcg
> + - make --output-sync -j`nproc`
> + - make --output-sync -j`nproc` check V=1
next prev parent reply other threads:[~2021-06-30 22:20 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-30 1:26 [PATCH v7 0/4] GitLab Custom Runners and Jobs (was: QEMU Gating CI) Cleber Rosa
2021-06-30 1:26 ` [PATCH v7 1/4] Jobs based on custom runners: documentation and configuration placeholder Cleber Rosa
2021-06-30 1:26 ` [PATCH v7 2/4] Jobs based on custom runners: build environment docs and playbook Cleber Rosa
2021-06-30 10:30 ` Alex Bennée
2021-06-30 18:23 ` Willian Rampazzo
2021-07-01 12:35 ` Alex Bennée
2021-06-30 17:56 ` Willian Rampazzo
2021-06-30 21:51 ` Wainer dos Santos Moschetta
2021-06-30 1:26 ` [PATCH v7 3/4] Jobs based on custom runners: docs and gitlab-runner setup playbook Cleber Rosa
2021-06-30 16:55 ` Willian Rampazzo
2021-06-30 22:02 ` Wainer dos Santos Moschetta
2021-07-01 12:54 ` Alex Bennée
2021-06-30 1:26 ` [PATCH v7 4/4] Jobs based on custom runners: add job definitions for QEMU's machines Cleber Rosa
2021-06-30 22:19 ` Wainer dos Santos Moschetta [this message]
2021-07-02 11:02 ` [PATCH v7 0/4] GitLab Custom Runners and Jobs (was: QEMU Gating CI) Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=79f58e5b-3fa1-919f-6cda-5150ef2b7a43@redhat.com \
--to=wainersm@redhat.com \
--cc=alex.bennee@linaro.org \
--cc=berrange@redhat.com \
--cc=bleal@redhat.com \
--cc=crosa@redhat.com \
--cc=ehabkost@redhat.com \
--cc=eskultet@redhat.com \
--cc=f4bug@amsat.org \
--cc=fam@euphon.net \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@gmail.com \
--cc=thuth@redhat.com \
--cc=willianr@redhat.com \
--cc=wrampazz@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).