Re: [Qemu-devel] [PATCH v3 2/9] hw/block/pflash_cfi01: Use the correct READ_ARRAY value

[Laszlo Ersek <lersek@redhat.com>]

On 07/05/19 17:46, Philippe Mathieu-Daudé wrote:
> In the "Read Array Flowchart" the command has a value of 0xFF.
> 
> In the document [*] the "Read Array Flowchart", the READ_ARRAY
> command has a value of 0xff.
> 
> Use the correct value in the pflash model.
> 
> There is no change of behavior in the guest, because:
> - when the guest were sending 0xFF, the reset_flash label
>   was setting the command value as 0x00
> - 0x00 was used internally for READ_ARRAY
> 
> To keep migration behaving correctly, we have to increase
> the VMState version. When migrating from an older version,
> we use the correct command value.
> 
> [*] "Common Flash Interface (CFI) and Command Sets"
>     (Intel Application Note 646)
>     Appendix B "Basic Command Set"
> 
> Reviewed-by: John Snow <jsnow@redhat.com>
> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> v3: Handle migrating the 'cmd' field.
> 
> Since Laszlo stated he did not test migration [*], I'm keeping his
> test tag, because the change with v2 has no impact in the tests
> he ran.

My thinking exactly. Thanks!
Laszlo

> 
> Likewise I'm keeping John and Alistair tags, but I'd like an extra
> review for the migration change, thanks!
> 
> [*] https://lists.gnu.org/archive/html/qemu-devel/2019-07/msg00679.html
> ---
>  hw/block/pflash_cfi01.c | 23 +++++++++++++----------
>  1 file changed, 13 insertions(+), 10 deletions(-)
> 
> diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
> index 9e34fd4e82..58cbef0588 100644
> --- a/hw/block/pflash_cfi01.c
> +++ b/hw/block/pflash_cfi01.c
> @@ -100,7 +100,7 @@ static int pflash_post_load(void *opaque, int version_id);
>  
>  static const VMStateDescription vmstate_pflash = {
>      .name = "pflash_cfi01",
> -    .version_id = 1,
> +    .version_id = 2,
>      .minimum_version_id = 1,
>      .post_load = pflash_post_load,
>      .fields = (VMStateField[]) {
> @@ -277,10 +277,9 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,
>          /* This should never happen : reset state & treat it as a read */
>          DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
>          pfl->wcycle = 0;
> -        pfl->cmd = 0;
> +        pfl->cmd = 0xff;
>          /* fall through to read code */
> -    case 0x00:
> -        /* Flash area read */
> +    case 0xff: /* Read Array */
>          ret = pflash_data_read(pfl, offset, width, be);
>          break;
>      case 0x10: /* Single byte program */
> @@ -448,8 +447,6 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset,
>      case 0:
>          /* read mode */
>          switch (cmd) {
> -        case 0x00: /* ??? */
> -            goto reset_flash;
>          case 0x10: /* Single Byte Program */
>          case 0x40: /* Single Byte Program */
>              DPRINTF("%s: Single Byte Program\n", __func__);
> @@ -526,7 +523,7 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset,
>              if (cmd == 0xd0) { /* confirm */
>                  pfl->wcycle = 0;
>                  pfl->status |= 0x80;
> -            } else if (cmd == 0xff) { /* read array mode */
> +            } else if (cmd == 0xff) { /* Read Array */
>                  goto reset_flash;
>              } else
>                  goto error_flash;
> @@ -553,7 +550,7 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset,
>              } else if (cmd == 0x01) {
>                  pfl->wcycle = 0;
>                  pfl->status |= 0x80;
> -            } else if (cmd == 0xff) {
> +            } else if (cmd == 0xff) { /* read array mode */
>                  goto reset_flash;
>              } else {
>                  DPRINTF("%s: Unknown (un)locking command\n", __func__);
> @@ -645,7 +642,7 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset,
>      trace_pflash_reset();
>      memory_region_rom_device_set_romd(&pfl->mem, true);
>      pfl->wcycle = 0;
> -    pfl->cmd = 0;
> +    pfl->cmd = 0xff;
>  }
>  
>  
> @@ -761,7 +758,7 @@ static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
>      }
>  
>      pfl->wcycle = 0;
> -    pfl->cmd = 0;
> +    pfl->cmd = 0xff;
>      pfl->status = 0;
>      /* Hardcoded CFI table */
>      /* Standard "QRY" string */
> @@ -1001,5 +998,11 @@ static int pflash_post_load(void *opaque, int version_id)
>          pfl->vmstate = qemu_add_vm_change_state_handler(postload_update_cb,
>                                                          pfl);
>      }
> +    if (version_id < 2) {
> +        /* v1 used incorrect value of 0x00 for the READ_ARRAY command. */
> +        if (pfl->cmd == 0x00) {
> +            pfl->cmd =  0xff;
> +        }
> +    }
>      return 0;
>  }
>