From: Eric Blake <eblake@redhat.com>
To: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-devel@nongnu.org, qemu-block@nongnu.org,
Stefan Hajnoczi <stefanha@redhat.com>,
Fam Zheng <famz@redhat.com>, Max Reitz <mreitz@redhat.com>
Subject: Re: [Qemu-devel] [PATCH 1/6] block: Support byte-based aio callbacks
Date: Tue, 24 Apr 2018 12:06:03 -0500 [thread overview]
Message-ID: <7e74c08c-9086-ac07-fac4-8a75fb716f29@redhat.com> (raw)
In-Reply-To: <20180424154026.GC4080@localhost.localdomain>
[-- Attachment #1: Type: text/plain, Size: 3247 bytes --]
On 04/24/2018 10:40 AM, Kevin Wolf wrote:
> Am 15.02.2018 um 20:28 hat Eric Blake geschrieben:
>> We are gradually moving away from sector-based interfaces, towards
>> byte-based. Add new sector-based aio callbacks for read and write,
>> to match the fact that bdrv_aio_pdiscard is already byte-based.
>>
>> Ideally, drivers should be converted to use coroutine callbacks
>> rather than aio; but that is not quite as trivial (if we do that
>> conversion, the null-aio driver will disappear), so for the
>> short term, converting the signature but keeping things with aio
>> is easier. Once all drivers are converted, the sector-based aio
>> callbacks will be removed.
>>
>> Signed-off-by: Eric Blake <eblake@redhat.com>
>> ---
>> include/block/block_int.h | 6 ++++++
>> block/io.c | 37 +++++++++++++++++++++++++++----------
>> 2 files changed, 33 insertions(+), 10 deletions(-)
>>
>> +++ b/block/io.c
>> @@ -934,9 +934,11 @@ static int coroutine_fn bdrv_driver_preadv(BlockDriverState *bs,
>> sector_num = offset >> BDRV_SECTOR_BITS;
>> nb_sectors = bytes >> BDRV_SECTOR_BITS;
>>
>> - assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
>> - assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
>> - assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
>> + if (!drv->bdrv_aio_preadv) {
>> + assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
>> + assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
>> + assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
>> + }
>
> Hm, this is kind of ugly. Previously, we handled everything byte-aligned
> in the first section, now we mix both in the second section.
>
> I can see that you do this so you don't have to duplicate the acb and
> coroutine yielding code below, but can we move things into the right
> place in the final patch at least? That is, calculate sector_num and
> nb_sectors only if all the byte-based interfaces weren't available.
Yeah, that's easy enough to squash into patch 6:
diff --git i/block/io.c w/block/io.c
index ba767612931..49fabe8eeb1 100644
--- i/block/io.c
+++ w/block/io.c
@@ -924,16 +924,13 @@ static int coroutine_fn
bdrv_driver_preadv(BlockDriverState *bs,
return drv->bdrv_co_preadv(bs, offset, bytes, qiov, flags);
}
- sector_num = offset >> BDRV_SECTOR_BITS;
- nb_sectors = bytes >> BDRV_SECTOR_BITS;
-
- if (!drv->bdrv_aio_preadv) {
- assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
- assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
- assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
- }
-
if (drv->bdrv_co_readv) {
+ sector_num = offset >> BDRV_SECTOR_BITS;
+ nb_sectors = bytes >> BDRV_SECTOR_BITS;
+
+ assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
+ assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
+ assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
return drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
} else {
BlockAIOCB *acb;
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 619 bytes --]
next prev parent reply other threads:[~2018-04-24 17:06 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-15 19:28 [Qemu-devel] [PATCH 0/6] block: byte-based AIO read/write Eric Blake
2018-02-15 19:28 ` [Qemu-devel] [PATCH 1/6] block: Support byte-based aio callbacks Eric Blake
2018-04-24 15:40 ` Kevin Wolf
2018-04-24 17:06 ` Eric Blake [this message]
2018-04-24 17:15 ` Kevin Wolf
2018-04-24 19:16 ` Eric Blake
2018-02-15 19:28 ` [Qemu-devel] [PATCH 2/6] file-win32: Switch to byte-based callbacks Eric Blake
2018-02-15 19:28 ` [Qemu-devel] [PATCH 3/6] null: Switch to byte-based read/write Eric Blake
2018-04-24 15:52 ` Kevin Wolf
2018-04-24 17:00 ` Eric Blake
2018-04-24 17:19 ` Kevin Wolf
2018-04-24 17:40 ` Eric Blake
2018-02-15 19:28 ` [Qemu-devel] [PATCH 4/6] rbd: Switch to byte-based callbacks Eric Blake
2018-02-15 19:28 ` [Qemu-devel] [PATCH 5/6] vxhs: " Eric Blake
2018-02-15 19:28 ` [Qemu-devel] [PATCH 6/6] block: Drop last of the sector-based aio callbacks Eric Blake
2018-04-24 15:02 ` [Qemu-devel] [PATCH 0/6] block: byte-based AIO read/write Eric Blake
2018-04-24 19:13 ` John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7e74c08c-9086-ac07-fac4-8a75fb716f29@redhat.com \
--to=eblake@redhat.com \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).