From: "Cédric Le Goater" <clg@kaod.org>
To: "Jamin Lin" <jamin_lin@aspeedtech.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>, "Cleber Rosa" <crosa@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Wainer dos Santos Moschetta" <wainersm@redhat.com>,
"Beraldo Leal" <bleal@redhat.com>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: troy_lee@aspeedtech.com, yunlin.tang@aspeedtech.com,
"Cédric Le Goater" <clg@redhat.com>
Subject: Re: [PATCH v2 06/11] hw/i2c/aspeed: support Tx/Rx buffer 64 bits address
Date: Mon, 2 Sep 2024 15:26:53 +0200 [thread overview]
Message-ID: <800a3ee3-357b-4fed-8b22-ad81c603f1b0@kaod.org> (raw)
In-Reply-To: <20240808024916.1262715-7-jamin_lin@aspeedtech.com>
Jamin,
Please change commit title to
hw/i2c/aspeed: Add support for Tx/Rx buffer 64 bits address
So more proposals to improve the commit log below,
On 8/8/24 04:49, Jamin Lin wrote:
> ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
> And the base address of dram is "0x4 00000000" which
and
> is 64bits address.
>
> It have "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
it has
> and "Master DMA Mode Rx Buffer Base Address[39:32](0x64)"
... registers
> to save the high part physical address of Tx/Rx buffer address
> for master mode.
>
> It have "Slave DMA Mode Tx Buffer Base Address[39:32](0x68)" and
It has
> "Slave DMA Mode Rx Buffer Base Address[39:32](0x6C)"
registers
> to save the high part physical address of Tx/Rx buffer address
> for slave mode.
>
> Ex: Tx buffer address for master mode [39:0]
> The "Master DMA Mode Tx Buffer Base Address[39:32](0x60)"
> bits [7:0] which corresponds the bits [39:32] of the 64 bits address of
> the Tx buffer address.
> The "Master DMA Mode Tx Buffer Base Address(0x30)" bits [31:0]
> which corresponds the bits [31:0] of the 64 bits address
> of the Tx buffer address.
>
> Introduce a new has_dma64 class attribute and new registers of
... new registers for the
> new mode to support DMA 64 bits dram address.
> Update new mode register number to 28.
I think it is worth mentioning that aspeed_i2c_bus_vmstate is changed
again and version is not increased because it was done earlier in the
same series.
Thanks,
C.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> Reviewed-by: Cédric Le Goater <clg@redhat.com>
> ---
> hw/i2c/aspeed_i2c.c | 48 +++++++++++++++++++++++++++++++++++++
> include/hw/i2c/aspeed_i2c.h | 12 +++++++++-
> 2 files changed, 59 insertions(+), 1 deletion(-)
>
> diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
> index 819a875839..c1ff80b1cf 100644
> --- a/hw/i2c/aspeed_i2c.c
> +++ b/hw/i2c/aspeed_i2c.c
> @@ -140,6 +140,7 @@ static uint64_t aspeed_i2c_bus_old_read(AspeedI2CBus *bus, hwaddr offset,
> static uint64_t aspeed_i2c_bus_new_read(AspeedI2CBus *bus, hwaddr offset,
> unsigned size)
> {
> + AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
> uint64_t value = bus->regs[offset / sizeof(*bus->regs)];
>
> switch (offset) {
> @@ -170,6 +171,16 @@ static uint64_t aspeed_i2c_bus_new_read(AspeedI2CBus *bus, hwaddr offset,
> case A_I2CM_CMD:
> value = SHARED_FIELD_DP32(value, BUS_BUSY_STS, i2c_bus_busy(bus->bus));
> break;
> + case A_I2CM_DMA_TX_ADDR_HI:
> + case A_I2CM_DMA_RX_ADDR_HI:
> + case A_I2CS_DMA_TX_ADDR_HI:
> + case A_I2CS_DMA_RX_ADDR_HI:
> + if (!aic->has_dma64) {
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
> + __func__);
> + value = -1;
> + }
> + break;
> default:
> qemu_log_mask(LOG_GUEST_ERROR,
> "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset);
> @@ -731,6 +742,42 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus, hwaddr offset,
> qemu_log_mask(LOG_UNIMP, "%s: Slave mode DMA TX is not implemented\n",
> __func__);
> break;
> +
> + case A_I2CM_DMA_TX_ADDR_HI:
> + if (!aic->has_dma64) {
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
> + __func__);
> + break;
> + }
> + bus->regs[R_I2CM_DMA_TX_ADDR_HI] = FIELD_EX32(value,
> + I2CM_DMA_TX_ADDR_HI,
> + ADDR_HI);
> + break;
> + case A_I2CM_DMA_RX_ADDR_HI:
> + if (!aic->has_dma64) {
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
> + __func__);
> + break;
> + }
> + bus->regs[R_I2CM_DMA_RX_ADDR_HI] = FIELD_EX32(value,
> + I2CM_DMA_RX_ADDR_HI,
> + ADDR_HI);
> + break;
> + case A_I2CS_DMA_TX_ADDR_HI:
> + qemu_log_mask(LOG_UNIMP,
> + "%s: Slave mode DMA TX Addr high is not implemented\n",
> + __func__);
> + break;
> + case A_I2CS_DMA_RX_ADDR_HI:
> + if (!aic->has_dma64) {
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA 64 bits support\n",
> + __func__);
> + break;
> + }
> + bus->regs[R_I2CS_DMA_RX_ADDR_HI] = FIELD_EX32(value,
> + I2CS_DMA_RX_ADDR_HI,
> + ADDR_HI);
> + break;
> default:
> qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
> __func__, offset);
> @@ -1554,6 +1601,7 @@ static void aspeed_2700_i2c_class_init(ObjectClass *klass, void *data)
> aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base;
> aic->has_dma = true;
> aic->mem_size = 0x2000;
> + aic->has_dma64 = true;
> }
>
> static const TypeInfo aspeed_2700_i2c_info = {
> diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
> index 4f23dc10c3..2c4c81bd20 100644
> --- a/include/hw/i2c/aspeed_i2c.h
> +++ b/include/hw/i2c/aspeed_i2c.h
> @@ -38,7 +38,7 @@ OBJECT_DECLARE_TYPE(AspeedI2CState, AspeedI2CClass, ASPEED_I2C)
> #define ASPEED_I2C_SHARE_POOL_SIZE 0x800
> #define ASPEED_I2C_BUS_POOL_SIZE 0x20
> #define ASPEED_I2C_OLD_NUM_REG 11
> -#define ASPEED_I2C_NEW_NUM_REG 22
> +#define ASPEED_I2C_NEW_NUM_REG 28
>
> #define A_I2CD_M_STOP_CMD BIT(5)
> #define A_I2CD_M_RX_CMD BIT(3)
> @@ -227,6 +227,15 @@ REG32(I2CS_DMA_LEN_STS, 0x4c)
> FIELD(I2CS_DMA_LEN_STS, TX_LEN, 0, 13)
> REG32(I2CC_DMA_ADDR, 0x50)
> REG32(I2CC_DMA_LEN, 0x54)
> +/* DMA 64bits */
> +REG32(I2CM_DMA_TX_ADDR_HI, 0x60)
> + FIELD(I2CM_DMA_TX_ADDR_HI, ADDR_HI, 0, 7)
> +REG32(I2CM_DMA_RX_ADDR_HI, 0x64)
> + FIELD(I2CM_DMA_RX_ADDR_HI, ADDR_HI, 0, 7)
> +REG32(I2CS_DMA_TX_ADDR_HI, 0x68)
> + FIELD(I2CS_DMA_TX_ADDR_HI, ADDR_HI, 0, 7)
> +REG32(I2CS_DMA_RX_ADDR_HI, 0x6c)
> + FIELD(I2CS_DMA_RX_ADDR_HI, ADDR_HI, 0, 7)
>
> struct AspeedI2CState;
>
> @@ -292,6 +301,7 @@ struct AspeedI2CClass {
> bool has_dma;
> bool has_share_pool;
> uint64_t mem_size;
> + bool has_dma64;
> };
>
> static inline bool aspeed_i2c_is_new_mode(AspeedI2CState *s)
next prev parent reply other threads:[~2024-09-02 13:27 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-08 2:49 [PATCH v2 00/11] support I2C for AST2700 Jamin Lin via
2024-08-08 2:49 ` [PATCH v2 01/11] hw/i2c/aspeed: support discontinuous register memory region of I2C bus Jamin Lin via
2024-09-02 13:08 ` Cédric Le Goater
2024-08-08 2:49 ` [PATCH v2 02/11] hw/i2c/aspeed: introduce a new bus pool buffer attribute in AspeedI2Cbus Jamin Lin via
2024-08-08 2:49 ` [PATCH v2 03/11] hw/i2c/aspeed: support discontinuous poll buffer memory region of I2C bus Jamin Lin via
2024-09-02 13:08 ` Cédric Le Goater
2024-08-08 2:49 ` [PATCH v2 04/11] hw/i2c/aspeed: introduce a new dma_dram_offset attribute in AspeedI2Cbus Jamin Lin via
2024-09-02 13:14 ` Cédric Le Goater
2024-09-02 13:22 ` Cédric Le Goater
2024-09-03 2:27 ` Jamin Lin
2024-08-08 2:49 ` [PATCH v2 05/11] hw/i2c/aspeed: Add AST2700 support Jamin Lin via
2024-09-02 13:14 ` Cédric Le Goater
2024-08-08 2:49 ` [PATCH v2 06/11] hw/i2c/aspeed: support Tx/Rx buffer 64 bits address Jamin Lin via
2024-09-02 13:26 ` Cédric Le Goater [this message]
2024-09-03 2:47 ` Jamin Lin
2024-08-08 2:49 ` [PATCH v2 07/11] hw/i2c/aspeed: support high part dram offset for DMA 64 bits Jamin Lin via
2024-09-02 13:28 ` Cédric Le Goater
2024-09-03 3:06 ` Jamin Lin
2024-09-03 7:08 ` Cédric Le Goater
2024-09-03 7:10 ` Jamin Lin
2024-08-08 2:49 ` [PATCH v2 08/11] aspeed/soc: introduce a new API to get the INTC orgate information Jamin Lin via
2024-09-02 14:53 ` Cédric Le Goater
2024-09-03 6:35 ` Jamin Lin
2024-08-08 2:49 ` [PATCH v2 09/11] aspeed/soc: support I2C for AST2700 Jamin Lin via
2024-08-08 2:49 ` [PATCH v2 10/11] aspeed: add tmp105 in i2c bus 0 " Jamin Lin via
2024-08-08 2:49 ` [PATCH v2 11/11] machine_aspeed.py: update to test I2C " Jamin Lin via
2024-09-02 13:41 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=800a3ee3-357b-4fed-8b22-ad81c603f1b0@kaod.org \
--to=clg@kaod.org \
--cc=andrew@codeconstruct.com.au \
--cc=bleal@redhat.com \
--cc=clg@redhat.com \
--cc=crosa@redhat.com \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=leetroy@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
--cc=wainersm@redhat.com \
--cc=yunlin.tang@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).