* [Qemu-devel] [PATCH v3 1/5] linuxboot_dma: remove duplicate definitions of FW_CFG
2019-01-16 17:49 [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom Stefano Garzarella
@ 2019-01-16 17:49 ` Stefano Garzarella
2019-01-16 17:49 ` [Qemu-devel] [PATCH v3 2/5] linuxboot_dma: move common functions in a new header Stefano Garzarella
` (4 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Stefano Garzarella @ 2019-01-16 17:49 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Eduardo Habkost, Michael S. Tsirkin,
Boris Ostrovsky, George Kennedy, Marcel Apfelbaum, Paolo Bonzini,
Maran Wilson, Stefan Hajnoczi, Liam Merwick, Eric Blake
FW_CFG_DMA_CTL_* bits and struct fw_cfg_dma_access are
defined in the qemu_fw_cfg.h header file already included
in linuxboot_dma.c, so we can remove the definition of
BIOS_CFG_DMA_CTL_* and struct FWCfgDmaAccess.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
---
pc-bios/optionrom/linuxboot_dma.c | 20 ++++----------------
1 file changed, 4 insertions(+), 16 deletions(-)
diff --git a/pc-bios/optionrom/linuxboot_dma.c b/pc-bios/optionrom/linuxboot_dma.c
index d856d41b55..f728dc839f 100644
--- a/pc-bios/optionrom/linuxboot_dma.c
+++ b/pc-bios/optionrom/linuxboot_dma.c
@@ -58,12 +58,6 @@ asm(
" jmp load_kernel\n"
);
-/* QEMU_CFG_DMA_CONTROL bits */
-#define BIOS_CFG_DMA_CTL_ERROR 0x01
-#define BIOS_CFG_DMA_CTL_READ 0x02
-#define BIOS_CFG_DMA_CTL_SKIP 0x04
-#define BIOS_CFG_DMA_CTL_SELECT 0x08
-
#define BIOS_CFG_DMA_ADDR_HIGH 0x514
#define BIOS_CFG_DMA_ADDR_LOW 0x518
@@ -75,12 +69,6 @@ asm(
#define barrier() asm("" : : : "memory")
-typedef struct FWCfgDmaAccess {
- uint32_t control;
- uint32_t length;
- uint64_t address;
-} __attribute__((packed)) FWCfgDmaAccess;
-
static inline void outl(uint32_t value, uint16_t port)
{
asm("outl %0, %w1" : : "a"(value), "Nd"(port));
@@ -153,9 +141,9 @@ static inline uint32_t be32_to_cpu(uint32_t x)
static __attribute__((__noinline__))
void bios_cfg_read_entry(void *buf, uint16_t entry, uint32_t len)
{
- FWCfgDmaAccess access;
- uint32_t control = (entry << 16) | BIOS_CFG_DMA_CTL_SELECT
- | BIOS_CFG_DMA_CTL_READ;
+ struct fw_cfg_dma_access access;
+ uint32_t control = (entry << 16) | FW_CFG_DMA_CTL_SELECT
+ | FW_CFG_DMA_CTL_READ;
access.address = cpu_to_be64((uint64_t)(uint32_t)buf);
access.length = cpu_to_be32(len);
@@ -165,7 +153,7 @@ void bios_cfg_read_entry(void *buf, uint16_t entry, uint32_t len)
outl(cpu_to_be32((uint32_t)&access), BIOS_CFG_DMA_ADDR_LOW);
- while (be32_to_cpu(access.control) & ~BIOS_CFG_DMA_CTL_ERROR) {
+ while (be32_to_cpu(access.control) & ~FW_CFG_DMA_CTL_ERROR) {
barrier();
}
}
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [Qemu-devel] [PATCH v3 2/5] linuxboot_dma: move common functions in a new header
2019-01-16 17:49 [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom Stefano Garzarella
2019-01-16 17:49 ` [Qemu-devel] [PATCH v3 1/5] linuxboot_dma: remove duplicate definitions of FW_CFG Stefano Garzarella
@ 2019-01-16 17:49 ` Stefano Garzarella
2019-01-16 17:49 ` [Qemu-devel] [PATCH v3 3/5] optionrom: add new PVH option rom Stefano Garzarella
` (3 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Stefano Garzarella @ 2019-01-16 17:49 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Eduardo Habkost, Michael S. Tsirkin,
Boris Ostrovsky, George Kennedy, Marcel Apfelbaum, Paolo Bonzini,
Maran Wilson, Stefan Hajnoczi, Liam Merwick, Eric Blake
In order to allow other option roms to use these common
useful functions and definitions, this patch put them
in two new C header files called optrom.h and
optrom_fw_cfg.h. We also add useful out*() in*()
functions for different size, and new fw_cfg functions
to use when DMA feature is not available.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
---
pc-bios/optionrom/linuxboot_dma.c | 100 +++++----------------------
pc-bios/optionrom/optrom.h | 110 ++++++++++++++++++++++++++++++
pc-bios/optionrom/optrom_fw_cfg.h | 92 +++++++++++++++++++++++++
3 files changed, 218 insertions(+), 84 deletions(-)
create mode 100644 pc-bios/optionrom/optrom.h
create mode 100644 pc-bios/optionrom/optrom_fw_cfg.h
diff --git a/pc-bios/optionrom/linuxboot_dma.c b/pc-bios/optionrom/linuxboot_dma.c
index f728dc839f..bf6ee79c38 100644
--- a/pc-bios/optionrom/linuxboot_dma.c
+++ b/pc-bios/optionrom/linuxboot_dma.c
@@ -20,6 +20,10 @@
* Richard W.M. Jones <rjones@redhat.com>
*/
+#include <stdint.h>
+#include "optrom.h"
+#include "optrom_fw_cfg.h"
+
asm(
".text\n"
".global _start\n"
@@ -58,34 +62,12 @@ asm(
" jmp load_kernel\n"
);
-#define BIOS_CFG_DMA_ADDR_HIGH 0x514
-#define BIOS_CFG_DMA_ADDR_LOW 0x518
-
-#define uint64_t unsigned long long
-#define uint32_t unsigned int
-#define uint16_t unsigned short
-
-#include "../../include/standard-headers/linux/qemu_fw_cfg.h"
-
-#define barrier() asm("" : : : "memory")
-
-static inline void outl(uint32_t value, uint16_t port)
-{
- asm("outl %0, %w1" : : "a"(value), "Nd"(port));
-}
-
static inline void set_es(void *addr)
{
uint32_t seg = (uint32_t)addr >> 4;
asm("movl %0, %%es" : : "r"(seg));
}
-#ifdef __clang__
-#define ADDR32
-#else
-#define ADDR32 "addr32 "
-#endif
-
static inline uint16_t readw_es(uint16_t offset)
{
uint16_t val;
@@ -108,56 +90,6 @@ static inline void writel_es(uint16_t offset, uint32_t val)
asm(ADDR32 "movl %0, %%es:(%1)" : : "r"(val), "r"((uint32_t)offset));
}
-static inline uint32_t bswap32(uint32_t x)
-{
- asm("bswapl %0" : "=r" (x) : "0" (x));
- return x;
-}
-
-static inline uint64_t bswap64(uint64_t x)
-{
- asm("bswapl %%eax; bswapl %%edx; xchg %%eax, %%edx" : "=A" (x) : "0" (x));
- return x;
-}
-
-static inline uint64_t cpu_to_be64(uint64_t x)
-{
- return bswap64(x);
-}
-
-static inline uint32_t cpu_to_be32(uint32_t x)
-{
- return bswap32(x);
-}
-
-static inline uint32_t be32_to_cpu(uint32_t x)
-{
- return bswap32(x);
-}
-
-/* clang is happy to inline this function, and bloats the
- * ROM.
- */
-static __attribute__((__noinline__))
-void bios_cfg_read_entry(void *buf, uint16_t entry, uint32_t len)
-{
- struct fw_cfg_dma_access access;
- uint32_t control = (entry << 16) | FW_CFG_DMA_CTL_SELECT
- | FW_CFG_DMA_CTL_READ;
-
- access.address = cpu_to_be64((uint64_t)(uint32_t)buf);
- access.length = cpu_to_be32(len);
- access.control = cpu_to_be32(control);
-
- barrier();
-
- outl(cpu_to_be32((uint32_t)&access), BIOS_CFG_DMA_ADDR_LOW);
-
- while (be32_to_cpu(access.control) & ~FW_CFG_DMA_CTL_ERROR) {
- barrier();
- }
-}
-
/* Return top of memory using BIOS function E801. */
static uint32_t get_e801_addr(void)
{
@@ -211,9 +143,9 @@ void load_kernel(void)
uint32_t initrd_end_page, max_allowed_page;
uint32_t segment_addr, stack_addr;
- bios_cfg_read_entry(&setup_addr, FW_CFG_SETUP_ADDR, 4);
- bios_cfg_read_entry(&setup_size, FW_CFG_SETUP_SIZE, 4);
- bios_cfg_read_entry(setup_addr, FW_CFG_SETUP_DATA, setup_size);
+ bios_cfg_read_entry_dma(&setup_addr, FW_CFG_SETUP_ADDR, 4);
+ bios_cfg_read_entry_dma(&setup_size, FW_CFG_SETUP_SIZE, 4);
+ bios_cfg_read_entry_dma(setup_addr, FW_CFG_SETUP_DATA, setup_size);
set_es(setup_addr);
@@ -223,8 +155,8 @@ void load_kernel(void)
writel_es(0x22c, 0x37ffffff);
}
- bios_cfg_read_entry(&initrd_addr, FW_CFG_INITRD_ADDR, 4);
- bios_cfg_read_entry(&initrd_size, FW_CFG_INITRD_SIZE, 4);
+ bios_cfg_read_entry_dma(&initrd_addr, FW_CFG_INITRD_ADDR, 4);
+ bios_cfg_read_entry_dma(&initrd_size, FW_CFG_INITRD_SIZE, 4);
initrd_end_page = ((uint32_t)(initrd_addr + initrd_size) & -4096);
max_allowed_page = (readl_es(0x22c) & -4096);
@@ -239,15 +171,15 @@ void load_kernel(void)
}
- bios_cfg_read_entry(initrd_addr, FW_CFG_INITRD_DATA, initrd_size);
+ bios_cfg_read_entry_dma(initrd_addr, FW_CFG_INITRD_DATA, initrd_size);
- bios_cfg_read_entry(&kernel_addr, FW_CFG_KERNEL_ADDR, 4);
- bios_cfg_read_entry(&kernel_size, FW_CFG_KERNEL_SIZE, 4);
- bios_cfg_read_entry(kernel_addr, FW_CFG_KERNEL_DATA, kernel_size);
+ bios_cfg_read_entry_dma(&kernel_addr, FW_CFG_KERNEL_ADDR, 4);
+ bios_cfg_read_entry_dma(&kernel_size, FW_CFG_KERNEL_SIZE, 4);
+ bios_cfg_read_entry_dma(kernel_addr, FW_CFG_KERNEL_DATA, kernel_size);
- bios_cfg_read_entry(&cmdline_addr, FW_CFG_CMDLINE_ADDR, 4);
- bios_cfg_read_entry(&cmdline_size, FW_CFG_CMDLINE_SIZE, 4);
- bios_cfg_read_entry(cmdline_addr, FW_CFG_CMDLINE_DATA, cmdline_size);
+ bios_cfg_read_entry_dma(&cmdline_addr, FW_CFG_CMDLINE_ADDR, 4);
+ bios_cfg_read_entry_dma(&cmdline_size, FW_CFG_CMDLINE_SIZE, 4);
+ bios_cfg_read_entry_dma(cmdline_addr, FW_CFG_CMDLINE_DATA, cmdline_size);
/* Boot linux */
segment_addr = ((uint32_t)setup_addr >> 4);
diff --git a/pc-bios/optionrom/optrom.h b/pc-bios/optionrom/optrom.h
new file mode 100644
index 0000000000..c5c8caa22f
--- /dev/null
+++ b/pc-bios/optionrom/optrom.h
@@ -0,0 +1,110 @@
+/*
+ * Common Option ROM Functions for C code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (c) 2015-2019 Red Hat Inc.
+ * Authors:
+ * Marc Marí <marc.mari.barcelo@gmail.com>
+ * Richard W.M. Jones <rjones@redhat.com>
+ * Stefano Garzarella <sgarzare@redhat.com>
+ */
+
+#ifndef OPTROM_H
+#define OPTROM_H
+
+#include <stdint.h>
+#include "../../include/standard-headers/linux/qemu_fw_cfg.h"
+
+#define barrier() asm("" : : : "memory")
+
+#ifdef __clang__
+#define ADDR32
+#else
+#define ADDR32 "addr32 "
+#endif
+
+static inline void outb(uint8_t value, uint16_t port)
+{
+ asm volatile("outb %0, %w1" : : "a"(value), "Nd"(port));
+}
+
+static inline void outw(uint16_t value, uint16_t port)
+{
+ asm volatile("outw %0, %w1" : : "a"(value), "Nd"(port));
+}
+
+static inline void outl(uint32_t value, uint16_t port)
+{
+ asm volatile("outl %0, %w1" : : "a"(value), "Nd"(port));
+}
+
+static inline uint8_t inb(uint16_t port)
+{
+ uint8_t value;
+
+ asm volatile("outl %w1, %0" : : "a"(value), "Nd"(port));
+ return value;
+}
+
+static inline uint16_t inw(uint16_t port)
+{
+ uint16_t value;
+
+ asm volatile("outl %w1, %0" : : "a"(value), "Nd"(port));
+ return value;
+}
+
+static inline uint32_t inl(uint16_t port)
+{
+ uint32_t value;
+
+ asm volatile("outl %w1, %0" : : "a"(value), "Nd"(port));
+ return value;
+}
+
+static inline void insb(uint16_t port, uint8_t *buf, uint32_t len)
+{
+ asm volatile("rep insb (%%dx), %%es:(%%edi)"
+ : "+c"(len), "+D"(buf) : "d"(port) : "memory");
+}
+
+static inline uint32_t bswap32(uint32_t x)
+{
+ asm("bswapl %0" : "=r" (x) : "0" (x));
+ return x;
+}
+
+static inline uint64_t bswap64(uint64_t x)
+{
+ asm("bswapl %%eax; bswapl %%edx; xchg %%eax, %%edx" : "=A" (x) : "0" (x));
+ return x;
+}
+
+static inline uint64_t cpu_to_be64(uint64_t x)
+{
+ return bswap64(x);
+}
+
+static inline uint32_t cpu_to_be32(uint32_t x)
+{
+ return bswap32(x);
+}
+
+static inline uint32_t be32_to_cpu(uint32_t x)
+{
+ return bswap32(x);
+}
+
+#endif /* OPTROM_H */
diff --git a/pc-bios/optionrom/optrom_fw_cfg.h b/pc-bios/optionrom/optrom_fw_cfg.h
new file mode 100644
index 0000000000..a3660a5200
--- /dev/null
+++ b/pc-bios/optionrom/optrom_fw_cfg.h
@@ -0,0 +1,92 @@
+/*
+ * Common Option ROM Functions for fw_cfg
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (c) 2015-2019 Red Hat Inc.
+ * Authors:
+ * Marc Marí <marc.mari.barcelo@gmail.com>
+ * Richard W.M. Jones <rjones@redhat.com>
+ * Stefano Garzarella <sgarzare@redhat.com>
+ */
+
+#ifndef OPTROM_FW_CFG_H
+#define OPTROM_FW_CFG_H
+
+#include "../../include/standard-headers/linux/qemu_fw_cfg.h"
+
+#define BIOS_CFG_IOPORT_CFG 0x510
+#define BIOS_CFG_IOPORT_DATA 0x511
+#define BIOS_CFG_DMA_ADDR_HIGH 0x514
+#define BIOS_CFG_DMA_ADDR_LOW 0x518
+
+static __attribute__((unused))
+void bios_cfg_select(uint16_t key)
+{
+ outw(key, BIOS_CFG_IOPORT_CFG);
+}
+
+static __attribute__((unused))
+void bios_cfg_read_entry_io(void *buf, uint16_t entry, uint32_t len)
+{
+ bios_cfg_select(entry);
+ insb(BIOS_CFG_IOPORT_DATA, buf, len);
+}
+
+/*
+ * clang is happy to inline this function, and bloats the
+ * ROM.
+ */
+static __attribute__((__noinline__)) __attribute__((unused))
+void bios_cfg_read_entry_dma(void *buf, uint16_t entry, uint32_t len)
+{
+ struct fw_cfg_dma_access access;
+ uint32_t control = (entry << 16) | FW_CFG_DMA_CTL_SELECT
+ | FW_CFG_DMA_CTL_READ;
+
+ access.address = cpu_to_be64((uint64_t)(uint32_t)buf);
+ access.length = cpu_to_be32(len);
+ access.control = cpu_to_be32(control);
+
+ barrier();
+
+ outl(cpu_to_be32((uint32_t)&access), BIOS_CFG_DMA_ADDR_LOW);
+
+ while (be32_to_cpu(access.control) & ~FW_CFG_DMA_CTL_ERROR) {
+ barrier();
+ }
+}
+
+static __attribute__((unused))
+void bios_cfg_read_entry(void *buf, uint16_t entry, uint32_t len,
+ uint32_t version)
+{
+ if (version & FW_CFG_VERSION_DMA) {
+ bios_cfg_read_entry_dma(buf, entry, len);
+ } else {
+ bios_cfg_read_entry_io(buf, entry, len);
+ }
+}
+
+static __attribute__((unused))
+uint32_t bios_cfg_version(void)
+{
+ uint32_t version;
+
+ bios_cfg_read_entry_io(&version, FW_CFG_ID, sizeof(version));
+
+ return version;
+}
+
+#endif /* OPTROM_FW_CFG_H */
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [Qemu-devel] [PATCH v3 3/5] optionrom: add new PVH option rom
2019-01-16 17:49 [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom Stefano Garzarella
2019-01-16 17:49 ` [Qemu-devel] [PATCH v3 1/5] linuxboot_dma: remove duplicate definitions of FW_CFG Stefano Garzarella
2019-01-16 17:49 ` [Qemu-devel] [PATCH v3 2/5] linuxboot_dma: move common functions in a new header Stefano Garzarella
@ 2019-01-16 17:49 ` Stefano Garzarella
2019-01-16 17:49 ` [Qemu-devel] [PATCH v3 4/5] hw/i386/pc: use " Stefano Garzarella
` (2 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Stefano Garzarella @ 2019-01-16 17:49 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Eduardo Habkost, Michael S. Tsirkin,
Boris Ostrovsky, George Kennedy, Marcel Apfelbaum, Paolo Bonzini,
Maran Wilson, Stefan Hajnoczi, Liam Merwick, Eric Blake
The new pvh.bin option rom can be used with SeaBIOS to boot
uncompressed kernel using the x86/HVM direct boot ABI.
pvh.S contains the entry point of the option rom. It runs
in real mode, loads the e820 table querying the BIOS, and
then it switches to 32bit protected mode and jumps to the
pvh_load_kernel() written in pvh_main.c.
pvh_load_kernel() loads the cmdline and kernel entry_point
using fw_cfg, then it looks for RSDP, fills the
hvm_start_info required by x86/HVM ABI, and finally jumps
to the kernel entry_point.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
---
Makefile | 2 +-
pc-bios/optionrom/Makefile | 5 +-
pc-bios/optionrom/pvh.S | 200 +++++++++++++++++++++++++++++++++++
pc-bios/optionrom/pvh_main.c | 116 ++++++++++++++++++++
pc-bios/pvh.bin | Bin 0 -> 1536 bytes
5 files changed, 321 insertions(+), 2 deletions(-)
create mode 100644 pc-bios/optionrom/pvh.S
create mode 100644 pc-bios/optionrom/pvh_main.c
create mode 100644 pc-bios/pvh.bin
diff --git a/Makefile b/Makefile
index a9ac16d94e..dd6d477fb1 100644
--- a/Makefile
+++ b/Makefile
@@ -668,7 +668,7 @@ efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
efi-e1000e.rom efi-vmxnet3.rom \
qemu-icon.bmp qemu_logo_no_text.svg \
bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
-multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin \
+multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin pvh.bin \
s390-ccw.img s390-netboot.img \
spapr-rtas.bin slof.bin skiboot.lid \
palcode-clipper \
diff --git a/pc-bios/optionrom/Makefile b/pc-bios/optionrom/Makefile
index a9a9e5e7eb..92c91d9949 100644
--- a/pc-bios/optionrom/Makefile
+++ b/pc-bios/optionrom/Makefile
@@ -37,7 +37,7 @@ Wa = -Wa,
ASFLAGS += -32
QEMU_CFLAGS += $(call cc-c-option, $(QEMU_CFLAGS), $(Wa)-32)
-build-all: multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin
+build-all: multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin pvh.bin
# suppress auto-removal of intermediate files
.SECONDARY:
@@ -46,6 +46,9 @@ build-all: multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin
%.o: %.S
$(call quiet-command,$(CPP) $(QEMU_INCLUDES) $(QEMU_DGFLAGS) -c -o - $< | $(AS) $(ASFLAGS) -o $@,"AS","$(TARGET_DIR)$@")
+%.img: %.o %_main.o
+ $(call quiet-command,$(LD) $(LDFLAGS_NOPIE) -m $(LD_I386_EMULATION) -T $(SRC_PATH)/pc-bios/optionrom/flat.lds -s -o $@ $?,"BUILD","$(TARGET_DIR)$@")
+
%.img: %.o
$(call quiet-command,$(LD) $(LDFLAGS_NOPIE) -m $(LD_I386_EMULATION) -T $(SRC_PATH)/pc-bios/optionrom/flat.lds -s -o $@ $<,"BUILD","$(TARGET_DIR)$@")
diff --git a/pc-bios/optionrom/pvh.S b/pc-bios/optionrom/pvh.S
new file mode 100644
index 0000000000..e1d7f4a7a7
--- /dev/null
+++ b/pc-bios/optionrom/pvh.S
@@ -0,0 +1,200 @@
+/*
+ * PVH Option ROM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright Novell Inc, 2009
+ * Authors: Alexander Graf <agraf@suse.de>
+ *
+ * Copyright (c) 2019 Red Hat Inc.
+ * Authors: Stefano Garzarella <sgarzare@redhat.com>
+ */
+
+#include "optionrom.h"
+
+#define BOOT_ROM_PRODUCT "PVH loader"
+
+#define GS_PROT_JUMP 0
+#define GS_GDT_DESC 6
+
+#ifdef OPTION_ROM_START
+#undef OPTION_ROM_START
+#endif
+#ifdef OPTION_ROM_END
+#undef OPTION_ROM_END
+#endif
+
+/*
+ * Redefine OPTION_ROM_START and OPTION_ROM_END, because this rom is produced
+ * linking multiple objects.
+ * signrom.py will add padding.
+ */
+#define OPTION_ROM_START \
+ .code16; \
+ .text; \
+ .global _start; \
+ _start:; \
+ .short 0xaa55; \
+ .byte 3; /* desired size in 512 units */
+
+#define OPTION_ROM_END \
+ _end:
+
+BOOT_ROM_START
+
+run_pvhboot:
+
+ cli
+ cld
+
+ mov %cs, %eax
+ shl $0x4, %eax
+
+ /* set up a long jump descriptor that is PC relative */
+
+ /* move stack memory to %gs */
+ mov %ss, %ecx
+ shl $0x4, %ecx
+ mov %esp, %ebx
+ add %ebx, %ecx
+ sub $0x20, %ecx
+ sub $0x30, %esp
+ shr $0x4, %ecx
+ mov %cx, %gs
+
+ /* now push the indirect jump descriptor there */
+ mov (prot_jump), %ebx
+ add %eax, %ebx
+ movl %ebx, %gs:GS_PROT_JUMP
+ mov $8, %bx
+ movw %bx, %gs:GS_PROT_JUMP + 4
+
+ /* fix the gdt descriptor to be PC relative */
+ movw (gdt_desc), %bx
+ movw %bx, %gs:GS_GDT_DESC
+ movl (gdt_desc+2), %ebx
+ add %eax, %ebx
+ movl %ebx, %gs:GS_GDT_DESC + 2
+
+ /* initialize HVM memmap table using int 0x15(e820) */
+
+ /* ES = pvh_e820 struct */
+ mov $pvh_e820, %eax
+ shr $4, %eax
+ mov %ax, %es
+
+ /* start storing memmap table at %es:8 (pvh_e820.table) */
+ mov $8,%edi
+ xor %ebx, %ebx
+ jmp memmap_loop
+
+memmap_loop_check:
+ /* pvh_e820 can contains up to 128 entries */
+ cmp $128, %ebx
+ je memmap_done
+
+memmap_loop:
+ /* entry size (hvm_memmap_table_entry) & max buffer size (int15) */
+ movl $24, %ecx
+ /* e820 */
+ movl $0x0000e820, %eax
+ /* 'SMAP' magic */
+ movl $0x534d4150, %edx
+ /* store counter value at %es:0 (pvh_e820.entries) */
+ movl %ebx, %es:0
+
+ int $0x15
+ /* error or last entry already done? */
+ jb memmap_err
+
+ /* %edi += entry size (hvm_memmap_table_entry) */
+ add $24, %edi
+
+ /* continuation value 0 means last entry */
+ test %ebx, %ebx
+ jnz memmap_loop_check
+
+ /* increase pvh_e820.entries to save the last entry */
+ movl %es:0, %ebx
+ inc %ebx
+
+memmap_done:
+ movl %ebx, %es:0
+
+memmap_err:
+
+ /* load the GDT before going into protected mode */
+lgdt:
+ data32 lgdt %gs:GS_GDT_DESC
+
+ /* get us to protected mode now */
+ movl $1, %eax
+ movl %eax, %cr0
+
+ /* the LJMP sets CS for us and gets us to 32-bit */
+ljmp:
+ data32 ljmp *%gs:GS_PROT_JUMP
+
+prot_mode:
+.code32
+
+ /* initialize all other segments */
+ movl $0x10, %eax
+ movl %eax, %ss
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %fs
+ movl %eax, %gs
+
+ jmp pvh_load_kernel
+
+/* Variables */
+.align 4, 0
+prot_jump: .long prot_mode
+ .short 8
+
+.align 4, 0
+gdt:
+ /* 0x00 */
+.byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+
+ /*
+ * 0x08: code segment
+ * (base=0, limit=0xfffff, type=32bit code exec/read, DPL=0, 4k)
+ */
+.byte 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00
+
+ /*
+ * 0x10: data segment
+ * (base=0, limit=0xfffff, type=32bit data read/write, DPL=0, 4k)
+ */
+.byte 0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00
+
+ /*
+ * 0x18: code segment
+ * (base=0, limit=0x0ffff, type=16bit code exec/read/conf, DPL=0, 1b)
+ */
+.byte 0xff, 0xff, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00
+
+ /*
+ * 0x20: data segment
+ * (base=0, limit=0x0ffff, type=16bit data read/write, DPL=0, 1b)
+ */
+.byte 0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0x00, 0x00
+
+gdt_desc:
+.short (5 * 8) - 1
+.long gdt
+
+BOOT_ROM_END
diff --git a/pc-bios/optionrom/pvh_main.c b/pc-bios/optionrom/pvh_main.c
new file mode 100644
index 0000000000..f355476e68
--- /dev/null
+++ b/pc-bios/optionrom/pvh_main.c
@@ -0,0 +1,116 @@
+/*
+ * PVH Option ROM for fw_cfg DMA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (c) 2019 Red Hat Inc.
+ * Authors:
+ * Stefano Garzarella <sgarzare@redhat.com>
+ */
+
+asm (".code32"); /* this code will be executed in protected mode */
+
+#include <stddef.h>
+#include <stdint.h>
+#include "optrom.h"
+#include "optrom_fw_cfg.h"
+#include "../../include/hw/xen/start_info.h"
+
+#define RSDP_SIGNATURE 0x2052545020445352LL /* "RSD PTR " */
+#define RSDP_AREA_ADDR 0x000E0000
+#define RSDP_AREA_SIZE 2048
+#define EBDA_BASE_ADDR 0x0000040E
+#define EBDA_SIZE 1024
+
+#define E820_MAXENTRIES 128
+#define CMDLINE_BUFSIZE 4096
+
+/* e820 table filled in pvh.S using int 0x15 */
+struct pvh_e820_table {
+ uint32_t entries;
+ uint32_t reserved;
+ struct hvm_memmap_table_entry table[E820_MAXENTRIES];
+};
+
+struct pvh_e820_table pvh_e820 __attribute__ ((aligned));
+
+static struct hvm_start_info start_info;
+static uint8_t cmdline_buffer[CMDLINE_BUFSIZE];
+
+
+/* Search RSDP signature. */
+static uintptr_t search_rsdp(uint32_t start_addr, uint32_t end_addr)
+{
+ uint64_t *rsdp_p;
+
+ /* RSDP signature is always on a 16 byte boundary */
+ for (rsdp_p = (uint64_t *)start_addr; rsdp_p < (uint64_t *)end_addr;
+ rsdp_p += 2) {
+ if (*rsdp_p == RSDP_SIGNATURE) {
+ return (uintptr_t)rsdp_p;
+ }
+ }
+
+ return 0;
+}
+
+/* Force the asm name without leading underscore, even on Win32. */
+extern void pvh_load_kernel(void) asm("pvh_load_kernel");
+
+void pvh_load_kernel(void)
+{
+ void *cmdline_addr = &cmdline_buffer;
+ void *kernel_entry;
+ uint32_t cmdline_size, fw_cfg_version = bios_cfg_version();
+
+ start_info.magic = XEN_HVM_START_MAGIC_VALUE;
+ start_info.version = 1;
+
+ /*
+ * pvh_e820 is filled in the pvh.S before to switch in protected mode,
+ * because we can use int 0x15 only in real mode.
+ */
+ start_info.memmap_entries = pvh_e820.entries;
+ start_info.memmap_paddr = (uintptr_t)pvh_e820.table;
+
+ /*
+ * Search RSDP in the main BIOS area below 1 MB.
+ * SeaBIOS store the RSDP in this area, so we try it first.
+ */
+ start_info.rsdp_paddr = search_rsdp(RSDP_AREA_ADDR,
+ RSDP_AREA_ADDR + RSDP_AREA_SIZE);
+
+ /* Search RSDP in the EBDA if it is not found */
+ if (!start_info.rsdp_paddr) {
+ /*
+ * Th EBDA address is stored at EBDA_BASE_ADDR. It contains 2 bytes
+ * segment pointer to EBDA, so we must convert it to a linear address.
+ */
+ uint32_t ebda_paddr = ((uint32_t)*((uint16_t *)EBDA_BASE_ADDR)) << 4;
+ if (ebda_paddr > 0x400) {
+ uint32_t *ebda = (uint32_t *)ebda_paddr;
+
+ start_info.rsdp_paddr = search_rsdp(*ebda, *ebda + EBDA_SIZE);
+ }
+ }
+
+ bios_cfg_read_entry(&cmdline_size, FW_CFG_CMDLINE_SIZE, 4, fw_cfg_version);
+ bios_cfg_read_entry(cmdline_addr, FW_CFG_CMDLINE_DATA, cmdline_size,
+ fw_cfg_version);
+ start_info.cmdline_paddr = (uintptr_t)cmdline_addr;
+
+ bios_cfg_read_entry(&kernel_entry, FW_CFG_KERNEL_ENTRY, 4, fw_cfg_version);
+
+ asm volatile("jmp *%1" : : "b"(&start_info), "c"(kernel_entry));
+}
diff --git a/pc-bios/pvh.bin b/pc-bios/pvh.bin
new file mode 100644
index 0000000000000000000000000000000000000000..38a41761014957d50eb55d790b6957888cbeee0a
GIT binary patch
literal 1536
zcmeHFO=uHA6n<Mbnu=ssNNWxu1R3K=F$hAzLe;1RTZsKrX#Im`@DQq$r1jvTWvz7B
z?oxVDJP5Tn&m!9tH6fLa717p9wTLMN$!ew8f`@9mzS(9Ku{W=skT>6(H}8AjdpoTU
zx4nc-R}e_ND=t*H!BfH+!No@%FjUZISAWu>0?idgIy6ml^CD#nRCq@fD@>KeLo{cJ
zx<%EHEKnhzpezJ1;e`YXiJ*q+1O(dw!^hpQ7pT$a2cWr<sAuUjFBYQFxi6Kp|3@F<
z)B!pk;Acj-gf<gD*4P|zXkS%z@1cqrpaXO1nFw-X_{2siK_#IY>lj?Wv^Sfe_CWwc
zMo)jE&+1vdsF$n<=mM<bpBHtPZ6mt(8k~Kkyx)hi53nBs$a?l<V=Khl>ch!vS2`2j
zK!@F5v$80&x6v7?AWe<181b?evP*iw8i<%%klA}>YNs^C{Dc*yLMGq=SW-nI6_nz7
z%BQ6w;Ckur%B0+$A8tL@hLl04m5hw{>C(7}61AJepV^K6N>WV`zv-#NDc*SAb=dU8
z5b@4O`C!McqcH|Kx{Aj1B+>F^0QgY1D)%opHOIngz1aUP-qIAVoR)6wz;q=m*Mipv
z=?|voayiHJbe2&xOGkaE10O;y;NEju1??_JHTm9Z>j)BPk9irSsmV*X_u;`NrP9Ud
z%ot~9Rh(Jtfr&cgU_oNW2m;LiR3Q!ALGXk(Z}9T$GhKShTmL->w!D%ws>&g?f%w@+
zeuT4BTZlMz-YL+5)_DUw-%XYIy$L=$Oq1<-Wir@)@zRC7_9%jMI3GvdpT4aQ+qTO=
z{<(%7q70X%#fZPOwr1O0K*musTl&iVe`IVV@%M;Ha;boqtX@vs1JUeX6R{T8otMbP
NY^|*c{O<$?e*uLwDi8nw
literal 0
HcmV?d00001
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [Qemu-devel] [PATCH v3 4/5] hw/i386/pc: use PVH option rom
2019-01-16 17:49 [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom Stefano Garzarella
` (2 preceding siblings ...)
2019-01-16 17:49 ` [Qemu-devel] [PATCH v3 3/5] optionrom: add new PVH option rom Stefano Garzarella
@ 2019-01-16 17:49 ` Stefano Garzarella
2019-01-16 17:49 ` [Qemu-devel] [PATCH v3 5/5] optionrom/pvh: load initrd from fw_cfg Stefano Garzarella
2019-01-16 18:31 ` [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom Paolo Bonzini
5 siblings, 0 replies; 11+ messages in thread
From: Stefano Garzarella @ 2019-01-16 17:49 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Eduardo Habkost, Michael S. Tsirkin,
Boris Ostrovsky, George Kennedy, Marcel Apfelbaum, Paolo Bonzini,
Maran Wilson, Stefan Hajnoczi, Liam Merwick, Eric Blake
Use pvh.bin option rom when we are booting an uncompressed
kernel using the x86/HVM direct boot ABI.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
---
hw/i386/pc.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 9ed5063de8..2833b130ba 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1252,6 +1252,10 @@ static void load_linux(PCMachineState *pcms,
initrd_size);
}
+ option_rom[nb_option_roms].bootindex = 0;
+ option_rom[nb_option_roms].name = "pvh.bin";
+ nb_option_roms++;
+
return;
}
/* This looks like a multiboot kernel. If it is, let's stop
@@ -1703,6 +1707,7 @@ void xen_load_linux(PCMachineState *pcms)
for (i = 0; i < nb_option_roms; i++) {
assert(!strcmp(option_rom[i].name, "linuxboot.bin") ||
!strcmp(option_rom[i].name, "linuxboot_dma.bin") ||
+ !strcmp(option_rom[i].name, "pvh.bin") ||
!strcmp(option_rom[i].name, "multiboot.bin"));
rom_add_option(option_rom[i].name, option_rom[i].bootindex);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [Qemu-devel] [PATCH v3 5/5] optionrom/pvh: load initrd from fw_cfg
2019-01-16 17:49 [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom Stefano Garzarella
` (3 preceding siblings ...)
2019-01-16 17:49 ` [Qemu-devel] [PATCH v3 4/5] hw/i386/pc: use " Stefano Garzarella
@ 2019-01-16 17:49 ` Stefano Garzarella
2019-01-16 18:31 ` [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom Paolo Bonzini
5 siblings, 0 replies; 11+ messages in thread
From: Stefano Garzarella @ 2019-01-16 17:49 UTC (permalink / raw)
To: qemu-devel
Cc: Richard Henderson, Eduardo Habkost, Michael S. Tsirkin,
Boris Ostrovsky, George Kennedy, Marcel Apfelbaum, Paolo Bonzini,
Maran Wilson, Stefan Hajnoczi, Liam Merwick, Eric Blake
If we found initrd through fw_cfg, we can load it and use the
first module of hvm_start_info to pass initrd address and size
to the kernel.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
pc-bios/optionrom/pvh_main.c | 21 +++++++++++++++++++--
pc-bios/pvh.bin | Bin 1536 -> 1536 bytes
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/pc-bios/optionrom/pvh_main.c b/pc-bios/optionrom/pvh_main.c
index f355476e68..d1b8b4b96e 100644
--- a/pc-bios/optionrom/pvh_main.c
+++ b/pc-bios/optionrom/pvh_main.c
@@ -46,6 +46,7 @@ struct pvh_e820_table {
struct pvh_e820_table pvh_e820 __attribute__ ((aligned));
static struct hvm_start_info start_info;
+static struct hvm_modlist_entry ramdisk_mod;
static uint8_t cmdline_buffer[CMDLINE_BUFSIZE];
@@ -71,8 +72,8 @@ extern void pvh_load_kernel(void) asm("pvh_load_kernel");
void pvh_load_kernel(void)
{
void *cmdline_addr = &cmdline_buffer;
- void *kernel_entry;
- uint32_t cmdline_size, fw_cfg_version = bios_cfg_version();
+ void *kernel_entry, *initrd_addr;
+ uint32_t cmdline_size, initrd_size, fw_cfg_version = bios_cfg_version();
start_info.magic = XEN_HVM_START_MAGIC_VALUE;
start_info.version = 1;
@@ -110,6 +111,22 @@ void pvh_load_kernel(void)
fw_cfg_version);
start_info.cmdline_paddr = (uintptr_t)cmdline_addr;
+ /* Check if we have the initrd to load */
+ bios_cfg_read_entry(&initrd_size, FW_CFG_INITRD_SIZE, 4, fw_cfg_version);
+ if (initrd_size) {
+ bios_cfg_read_entry(&initrd_addr, FW_CFG_INITRD_ADDR, 4,
+ fw_cfg_version);
+ bios_cfg_read_entry(initrd_addr, FW_CFG_INITRD_DATA, initrd_size,
+ fw_cfg_version);
+
+ ramdisk_mod.paddr = (uintptr_t)initrd_addr;
+ ramdisk_mod.size = initrd_size;
+
+ /* The first module is always ramdisk. */
+ start_info.modlist_paddr = (uintptr_t)&ramdisk_mod;
+ start_info.nr_modules = 1;
+ }
+
bios_cfg_read_entry(&kernel_entry, FW_CFG_KERNEL_ENTRY, 4, fw_cfg_version);
asm volatile("jmp *%1" : : "b"(&start_info), "c"(kernel_entry));
diff --git a/pc-bios/pvh.bin b/pc-bios/pvh.bin
index 38a41761014957d50eb55d790b6957888cbeee0a..8033080ada2db4c4613fdc3bb5a69d79c7b0c0ca 100644
GIT binary patch
delta 735
zcmZqRY2cYKndyM&#;Nv<`Y|dZ$5|Uh85k;#<{2MnZ2__v85kHA9sn{HZvYZIPJmb|
zfW&duHKLQ5nUrMIfhw902-q@k@G+F$J<hrSC<y|`S(k`Tc4U&S-@w4az+ic-T<m2U
z69Yr<HjpGxgXJ;)wosrzw?N~kpkNn;ZV#5mj{zY;3Y-^99~fR*3^J!vbP15`Eo0c1
zzzXD<s2q1u0U8F>|Cout)f{N^UIC!Q4iTVG=c}~$y9I%~ogfvxH7Wv~w?60W5Uq#G
zb^8ECzJtWNSyZ}1R9F_z0NXGJNbcZ<DuU@10jqOS5otY88nQzGD7y<}QQCW$0*+lE
zt3K!K289;TXpa96n~%su$Hm7U?k!Pcm;iP@C<qup_A@ZNwE6%4fA1DG5F4yu2N#e9
zax=_C9<XzTprSw{MY?NLz=GW_Dm;r5fc6|`O#zZ102C5goB<ZffeP&asaQM#EH(uy
zcAT|GlmilnFD)iJGRxEpyomk#|34@!c7fD%et6*v;$wse*j2kg!O{z~>V*bKQ3x<N
zE|p|Lq(IIGO7Xnlg_tL@3*>Z=Q(yf415}LN%^5^G8scV%O`y;R+Qji<3DDe^<^K@j
Z2no&!h6hlR%ga4L7i~VsEX~MR4FFIY;aUIy
delta 434
zcmZqRY2cYKnW;f!<5YV_{Sp<C<E#!M3=9=V^Nf$Px&T>>3=9kl8-R?(1wdj)2Z)sc
zB#yJ@h)iZ?Qj%c@s%SnSV9UV4$549rIBNn>5(JL3rie^-WRk9*!N9`6V0pM)?4=n{
zY40|WBv6CpVg5E%pg^}k<ENlt7lm#Qmd1|(Awde97fT-)URn$?r&BZqNcNU7>~;W}
z(J7;H+(iY*0P26n#NRp{$k;2u3Un37%Fb75@AnA;c{@QWdTUffIzN5R*&&(+mFxBa
zirfc@b+f2+hp4bDjsV*b10;6{Ko!CC3V_t@289Gro525v%|~RS<Kklv_ij-Gs$@u;
z0Cpb8iy$ro!^@b-51D1cMPB^<`~N@4rd^^y(asw$-h%iT_JOV01+ui)MMdDn3812v
j<^TWx2l~|T0E*vVzWMk6|K^V@e2kM=|4(AIW9$F`FOZ8_
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom
2019-01-16 17:49 [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom Stefano Garzarella
` (4 preceding siblings ...)
2019-01-16 17:49 ` [Qemu-devel] [PATCH v3 5/5] optionrom/pvh: load initrd from fw_cfg Stefano Garzarella
@ 2019-01-16 18:31 ` Paolo Bonzini
2019-01-16 21:17 ` Paolo Bonzini
5 siblings, 1 reply; 11+ messages in thread
From: Paolo Bonzini @ 2019-01-16 18:31 UTC (permalink / raw)
To: Stefano Garzarella, qemu-devel
Cc: Richard Henderson, Eduardo Habkost, Michael S. Tsirkin,
Boris Ostrovsky, George Kennedy, Marcel Apfelbaum, Maran Wilson,
Stefan Hajnoczi, Liam Merwick, Eric Blake
On 16/01/19 18:49, Stefano Garzarella wrote:
> This patch series is based on "[PATCH v3 0/4] QEMU changes to do PVH boot" and
> provides a PVH option rom that can be used with SeaBIOS to boot uncompressed
> kernel using the x86/HVM direct boot ABI.
>
> Patches 1 and 2 are to prepare the PVH option rom, moving common functions in
> the new headers. Patch 3 adds the new PVH option rom. Patch 4 uses it when we
> are booting an uncompressed kernel using the x86/HVM direct boot ABI. Patch 5
> adds the support of loading the initrd in the PVH option rom.
>
> Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com>
I get this:
CC optionrom/pvh_main.o
/tmp/ccoel69H.s: Assembler messages:
/tmp/ccoel69H.s:171: Error: attempt to move .org backwards
when applying this series on CentOS 7.
Paolo
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom
2019-01-16 18:31 ` [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom Paolo Bonzini
@ 2019-01-16 21:17 ` Paolo Bonzini
2019-01-17 7:50 ` Stefano Garzarella
0 siblings, 1 reply; 11+ messages in thread
From: Paolo Bonzini @ 2019-01-16 21:17 UTC (permalink / raw)
To: Stefano Garzarella, qemu-devel
Cc: Eduardo Habkost, Michael S. Tsirkin, Maran Wilson,
Stefan Hajnoczi, George Kennedy, Boris Ostrovsky,
Richard Henderson
On 16/01/19 19:31, Paolo Bonzini wrote:
> On 16/01/19 18:49, Stefano Garzarella wrote:
>> This patch series is based on "[PATCH v3 0/4] QEMU changes to do PVH boot" and
>> provides a PVH option rom that can be used with SeaBIOS to boot uncompressed
>> kernel using the x86/HVM direct boot ABI.
>>
>> Patches 1 and 2 are to prepare the PVH option rom, moving common functions in
>> the new headers. Patch 3 adds the new PVH option rom. Patch 4 uses it when we
>> are booting an uncompressed kernel using the x86/HVM direct boot ABI. Patch 5
>> adds the support of loading the initrd in the PVH option rom.
>>
>> Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com>
>
> I get this:
>
> CC optionrom/pvh_main.o
> /tmp/ccoel69H.s: Assembler messages:
> /tmp/ccoel69H.s:171: Error: attempt to move .org backwards
>
> when applying this series on CentOS 7.
Oops, the issue was actaually in linux_dma - I was confused by make -j
reordering the output. The fix is trivial
--- a/pc-bios/optionrom/linuxboot_dma.c
+++ b/pc-bios/optionrom/linuxboot_dma.c
@@ -20,10 +20,6 @@
* Richard W.M. Jones <rjones@redhat.com>
*/
-#include <stdint.h>
-#include "optrom.h"
-#include "optrom_fw_cfg.h"
-
asm(
".text\n"
".global _start\n"
@@ -62,6 +58,10 @@ asm(
" jmp load_kernel\n"
);
+#include <stdint.h>
+#include "optrom.h"
+#include "optrom_fw_cfg.h"
+
static inline void set_es(void *addr)
{
uint32_t seg = (uint32_t)addr >> 4;
Also, the $? in the new rule should be $^. I wouldn't use a pattern
rule for that, writing it explicitly as "pvh.img: pvh.S pvh_main.c"
Thanks,
Paolo
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom
2019-01-16 21:17 ` Paolo Bonzini
@ 2019-01-17 7:50 ` Stefano Garzarella
2019-01-17 10:31 ` Paolo Bonzini
0 siblings, 1 reply; 11+ messages in thread
From: Stefano Garzarella @ 2019-01-17 7:50 UTC (permalink / raw)
To: Paolo Bonzini
Cc: qemu-devel, Eduardo Habkost, Michael S. Tsirkin, Maran Wilson,
Stefan Hajnoczi, George Kennedy, Boris Ostrovsky,
Richard Henderson
Hi Paolo,
On Wed, Jan 16, 2019 at 10:17:15PM +0100, Paolo Bonzini wrote:
> On 16/01/19 19:31, Paolo Bonzini wrote:
> >
> > I get this:
> >
> > CC optionrom/pvh_main.o
> > /tmp/ccoel69H.s: Assembler messages:
> > /tmp/ccoel69H.s:171: Error: attempt to move .org backwards
> >
> > when applying this series on CentOS 7.
>
> Oops, the issue was actaually in linux_dma - I was confused by make -j
> reordering the output. The fix is trivial
Thanks for the fix! I didn't have this error on Fedora 29 (gcc 8.2.1).
>
> --- a/pc-bios/optionrom/linuxboot_dma.c
> +++ b/pc-bios/optionrom/linuxboot_dma.c
> @@ -20,10 +20,6 @@
> * Richard W.M. Jones <rjones@redhat.com>
> */
>
> -#include <stdint.h>
> -#include "optrom.h"
> -#include "optrom_fw_cfg.h"
> -
> asm(
> ".text\n"
> ".global _start\n"
> @@ -62,6 +58,10 @@ asm(
> " jmp load_kernel\n"
> );
>
> +#include <stdint.h>
> +#include "optrom.h"
> +#include "optrom_fw_cfg.h"
> +
> static inline void set_es(void *addr)
> {
> uint32_t seg = (uint32_t)addr >> 4;
>
>
> Also, the $? in the new rule should be $^. I wouldn't use a pattern
> rule for that, writing it explicitly as "pvh.img: pvh.S pvh_main.c"
I'll fix the Makefile.
Thanks,
Stefano
>
> Thanks,
>
> Paolo
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom
2019-01-17 7:50 ` Stefano Garzarella
@ 2019-01-17 10:31 ` Paolo Bonzini
2019-01-17 10:36 ` Stefano Garzarella
0 siblings, 1 reply; 11+ messages in thread
From: Paolo Bonzini @ 2019-01-17 10:31 UTC (permalink / raw)
To: Stefano Garzarella
Cc: qemu-devel, Eduardo Habkost, Michael S. Tsirkin, Maran Wilson,
Stefan Hajnoczi, George Kennedy, Boris Ostrovsky,
Richard Henderson
On 17/01/19 08:50, Stefano Garzarella wrote:
>> Also, the $? in the new rule should be $^. I wouldn't use a pattern
>> rule for that, writing it explicitly as "pvh.img: pvh.S pvh_main.c"
> I'll fix the Makefile.
(of course it's "pvh.img: pvh.o pvh_main.o").
I can fix up as well if it's okay for you.
Paolo
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Qemu-devel] [PATCH v3 0/5] pvh: add new PVH option rom
2019-01-17 10:31 ` Paolo Bonzini
@ 2019-01-17 10:36 ` Stefano Garzarella
0 siblings, 0 replies; 11+ messages in thread
From: Stefano Garzarella @ 2019-01-17 10:36 UTC (permalink / raw)
To: Paolo Bonzini
Cc: qemu-devel, Eduardo Habkost, Michael S. Tsirkin, Maran Wilson,
Stefan Hajnoczi, George Kennedy, Boris Ostrovsky,
Richard Henderson
On Thu, Jan 17, 2019 at 11:31:27AM +0100, Paolo Bonzini wrote:
> On 17/01/19 08:50, Stefano Garzarella wrote:
> >> Also, the $? in the new rule should be $^. I wouldn't use a pattern
> >> rule for that, writing it explicitly as "pvh.img: pvh.S pvh_main.c"
> > I'll fix the Makefile.
>
> (of course it's "pvh.img: pvh.o pvh_main.o").
>
> I can fix up as well if it's okay for you.
I already sent a v4 fixing your comments (and I put "pvh.img: pvh.o
pvh_main.o" :) ), but if want to fix this series is okay for me.
Thanks,
Stefano
^ permalink raw reply [flat|nested] 11+ messages in thread