qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Zhenzhong Duan" <zhenzhong.duan@intel.com>,
	"Clément Mathieu--Drif" <clement.mathieu--drif@eviden.com>,
	"Igor Mammedov" <imammedo@redhat.com>,
	"Ani Sinha" <anisinha@redhat.com>
Subject: [PULL 22/48] tests/acpi: q35: Update host address width in DMAR
Date: Wed, 15 Jan 2025 13:09:36 -0500	[thread overview]
Message-ID: <81ab964f21620db32558277f220eb0d803c14109.1736964488.git.mst@redhat.com> (raw)
In-Reply-To: <cover.1736964487.git.mst@redhat.com>

From: Zhenzhong Duan <zhenzhong.duan@intel.com>

Differences:

@@ -1,39 +1,39 @@
 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20200925 (64-bit version)
  * Copyright (c) 2000 - 2020 Intel Corporation
  *
- * Disassembly of tests/data/acpi/x86/q35/DMAR.dmar, Mon Nov 11 15:31:18 2024
+ * Disassembly of /tmp/aml-SPJ4W2, Mon Nov 11 15:31:18 2024
  *
  * ACPI Data Table [DMAR]
  *
  * Format: [HexOffset DecimalOffset ByteLength]  FieldName : FieldValue
  */

 [000h 0000   4]                    Signature : "DMAR"    [DMA Remapping table]
 [004h 0004   4]                 Table Length : 00000078
 [008h 0008   1]                     Revision : 01
-[009h 0009   1]                     Checksum : 15
+[009h 0009   1]                     Checksum : 0C
 [00Ah 0010   6]                       Oem ID : "BOCHS "
 [010h 0016   8]                 Oem Table ID : "BXPC    "
 [018h 0024   4]                 Oem Revision : 00000001
 [01Ch 0028   4]              Asl Compiler ID : "BXPC"
 [020h 0032   4]        Asl Compiler Revision : 00000001

-[024h 0036   1]           Host Address Width : 26
+[024h 0036   1]           Host Address Width : 2F
 [025h 0037   1]                        Flags : 01
 [026h 0038  10]                     Reserved : 00 00 00 00 00 00 00 00 00 00

 [030h 0048   2]                Subtable Type : 0000 [Hardware Unit Definition]
 [032h 0050   2]                       Length : 0040

 [034h 0052   1]                        Flags : 00
 [035h 0053   1]                     Reserved : 00
 [036h 0054   2]           PCI Segment Number : 0000
 [038h 0056   8]        Register Base Address : 00000000FED90000

 [040h 0064   1]            Device Scope Type : 03 [IOAPIC Device]
 [041h 0065   1]                 Entry Length : 08
 [042h 0066   2]                     Reserved : 0000
 [044h 0068   1]               Enumeration ID : 00
 [045h 0069   1]               PCI Bus Number : FF

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Acked-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Message-Id: <20241212083757.605022-18-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 tests/qtest/bios-tables-test-allowed-diff.h |   1 -
 tests/data/acpi/x86/q35/DMAR.dmar           | Bin 120 -> 120 bytes
 2 files changed, 1 deletion(-)

diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h
index 46f80be9ca..dfb8523c8b 100644
--- a/tests/qtest/bios-tables-test-allowed-diff.h
+++ b/tests/qtest/bios-tables-test-allowed-diff.h
@@ -1,2 +1 @@
 /* List of comma-separated changed AML files to ignore */
-"tests/data/acpi/x86/q35/DMAR.dmar",
diff --git a/tests/data/acpi/x86/q35/DMAR.dmar b/tests/data/acpi/x86/q35/DMAR.dmar
index 0dca6e68ad8a8ca5b981bcfbc745385a63e9f216..0c05976715c6f2f6ec46ef6d37790f86a392b5ea 100644
GIT binary patch
delta 21
ccmb=Z;BxVG460yYU|{5#$R)+7KT$Op05(qqk^lez

delta 21
ccmb=Z;BxVG460yYU|<xT$R)+7Hc>Sg05*ICk^lez

-- 
MST



  parent reply	other threads:[~2025-01-15 18:17 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-15 18:08 [PULL 00/48] virtio,pc,pci: features, fixes, cleanups Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 01/48] virtio-gpu: Add definition for resource_uuid feature Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 02/48] pci: ensure valid link status bits for downstream ports Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 03/48] tests: acpi: whitelist expected blobs Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 04/48] cpuhp: make sure that remove events are handled within the same SCI Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 05/48] tests: acpi: update expected blobs Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 06/48] intel_iommu: Use the latest fault reasons defined by spec Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 07/48] intel_iommu: Make pasid entry type check accurate Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 08/48] intel_iommu: Add a placeholder variable for scalable mode stage-1 translation Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 09/48] intel_iommu: Flush stage-2 cache in PASID-selective PASID-based iotlb invalidation Michael S. Tsirkin
2025-01-15 18:08 ` [PULL 10/48] intel_iommu: Rename slpte to pte Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 11/48] intel_iommu: Implement stage-1 translation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 12/48] intel_iommu: Check if the input address is canonical Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 13/48] intel_iommu: Check stage-1 translation result with interrupt range Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 14/48] intel_iommu: Set accessed and dirty bits during stage-1 translation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 15/48] intel_iommu: Flush stage-1 cache in iotlb invalidation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 16/48] intel_iommu: Process PASID-based " Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 17/48] intel_iommu: Add an internal API to find an address space with PASID Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 18/48] intel_iommu: Add support for PASID-based device IOTLB invalidation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 19/48] intel_iommu: piotlb invalidation should notify unmap Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 20/48] tests/acpi: q35: allow DMAR acpi table changes Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 21/48] intel_iommu: Set default aw_bits to 48 starting from QEMU 9.2 Michael S. Tsirkin
2025-01-15 18:09 ` Michael S. Tsirkin [this message]
2025-01-15 18:09 ` [PULL 23/48] intel_iommu: Introduce a property x-flts for stage-1 translation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 24/48] intel_iommu: Introduce a property to control FS1GP cap bit setting Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 25/48] tests/qtest: Add intel-iommu test Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 26/48] pci/msix: Fix msix pba read vector poll end calculation Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 27/48] acpi/ghes: get rid of ACPI_HEST_SRC_ID_RESERVED Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 28/48] acpi/ghes: simplify acpi_ghes_record_errors() code Michael S. Tsirkin
2025-01-15 18:09 ` [PULL 29/48] acpi/ghes: simplify the per-arch caller to build HEST table Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 30/48] acpi/ghes: better handle source_id and notification Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 31/48] acpi/ghes: Fix acpi_ghes_record_errors() argument Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 32/48] acpi/ghes: Remove a duplicated out of bounds check Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 33/48] acpi/ghes: Change the type for source_id Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 34/48] acpi/ghes: don't check if physical_address is not zero Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 35/48] acpi/ghes: make the GHES record generation more generic Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 36/48] acpi/ghes: better name GHES memory error function Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 37/48] acpi/ghes: don't crash QEMU if ghes GED is not found Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 38/48] acpi/ghes: rename etc/hardware_error file macros Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 39/48] acpi/ghes: better name the offset of the hardware error firmware Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 40/48] acpi/ghes: move offset calculus to a separate function Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 41/48] acpi/ghes: Change ghes fill logic to work with only one source Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 42/48] docs: acpi_hest_ghes: fix documentation for CPER size Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 43/48] tests: acpi: whitelist expected blobs Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 44/48] pci: acpi: Windows 'PCI Label Id' bug workaround Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 45/48] tests: acpi: update expected blobs Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 46/48] hw/cxl: Fix msix_notify: Assertion `vector < dev->msix_entries_nr` Michael S. Tsirkin
2025-01-15 18:10 ` [PULL 47/48] vhost: Add stubs for the migration state transfer interface Michael S. Tsirkin
2025-01-15 18:11 ` [PULL 48/48] virtio-net: vhost-user: Implement internal migration Michael S. Tsirkin
2025-01-15 18:15 ` [PULL 00/48] virtio,pc,pci: features, fixes, cleanups David Woodhouse
2025-01-15 22:42   ` Michael S. Tsirkin
2025-01-15 23:05     ` David Woodhouse
2025-01-16  7:05       ` Michael S. Tsirkin
2025-01-16 14:06         ` David Woodhouse
2025-01-16  7:06 ` Michael S. Tsirkin
2025-01-16 22:10 ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=81ab964f21620db32558277f220eb0d803c14109.1736964488.git.mst@redhat.com \
    --to=mst@redhat.com \
    --cc=anisinha@redhat.com \
    --cc=clement.mathieu--drif@eviden.com \
    --cc=imammedo@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=zhenzhong.duan@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).