* [PATCH v2] .travis.yml: Test the release tarball
@ 2019-10-07 16:04 Philippe Mathieu-Daudé
2019-10-18 14:40 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 4+ messages in thread
From: Philippe Mathieu-Daudé @ 2019-10-07 16:04 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Alex Bennée, Bruce Rogers, Michael Tokarev,
Philippe Mathieu-Daudé
Add a job to generate the release tarball and build/install few
QEMU targets from it.
Ideally we should build the 'efi' target from the 'roms' directory,
but it is too time consuming.
This job is only triggered when a tag starting with 'v' is pushed,
which is the case with release candidate tags.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
v2: addressed mdroth comments
This job is quick enough: Ran for 16 min 33 sec
https://travis-ci.org/philmd/qemu/jobs/594565293
Based-on: <20191007133540.30623-1-philmd@redhat.com>
pull request including "Fix tarball builds of UEFI/EDK2 firmware"
https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html
---
.travis.yml | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/.travis.yml b/.travis.yml
index d0b9e099b9..d881ea0849 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -339,3 +339,26 @@ matrix:
- CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
- TEST_CMD="make -j3 check-tcg V=1"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
+
+
+ # Release builds
+ # The make-release script expect a QEMU version, so our tag must start with a 'v'.
+ # This is the case when release candidate tags are created.
+ - if: tag IS present AND tag =~ /^v\d+\.\d+(\.\d+)?(-\S*)?$/
+ env:
+ # We want to build from the release tarball
+ - BUILD_DIR="release/build/dir" SRC_DIR="../../.."
+ - BASE_CONFIG="--prefix=$PWD/dist"
+ - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user"
+ - TEST_CMD="make install -j3"
+ - QEMU_VERSION="${TRAVIS_TAG:1}"
+ - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
+ before_script:
+ - command -v ccache && ccache --zero-stats
+ - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
+ script:
+ - make -C ${SRC_DIR} qemu-${QEMU_VERSION}.tar.bz2
+ - ls -l ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2
+ - tar -xf ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION}
+ - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
+ - make install
--
2.21.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v2] .travis.yml: Test the release tarball
2019-10-07 16:04 [PATCH v2] .travis.yml: Test the release tarball Philippe Mathieu-Daudé
@ 2019-10-18 14:40 ` Philippe Mathieu-Daudé
2019-10-18 15:56 ` Alex Bennée
0 siblings, 1 reply; 4+ messages in thread
From: Philippe Mathieu-Daudé @ 2019-10-18 14:40 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Alex Bennée, Michael Tokarev, Michael Roth,
Bruce Rogers
ping?
On 10/7/19 6:04 PM, Philippe Mathieu-Daudé wrote:
> Add a job to generate the release tarball and build/install few
> QEMU targets from it.
>
> Ideally we should build the 'efi' target from the 'roms' directory,
> but it is too time consuming.
>
> This job is only triggered when a tag starting with 'v' is pushed,
> which is the case with release candidate tags.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> v2: addressed mdroth comments
>
> This job is quick enough: Ran for 16 min 33 sec
> https://travis-ci.org/philmd/qemu/jobs/594565293
>
> Based-on: <20191007133540.30623-1-philmd@redhat.com>
> pull request including "Fix tarball builds of UEFI/EDK2 firmware"
> https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html
> ---
> .travis.yml | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/.travis.yml b/.travis.yml
> index d0b9e099b9..d881ea0849 100644
> --- a/.travis.yml
> +++ b/.travis.yml
> @@ -339,3 +339,26 @@ matrix:
> - CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
> - TEST_CMD="make -j3 check-tcg V=1"
> - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
> +
> +
> + # Release builds
> + # The make-release script expect a QEMU version, so our tag must start with a 'v'.
> + # This is the case when release candidate tags are created.
> + - if: tag IS present AND tag =~ /^v\d+\.\d+(\.\d+)?(-\S*)?$/
> + env:
> + # We want to build from the release tarball
> + - BUILD_DIR="release/build/dir" SRC_DIR="../../.."
> + - BASE_CONFIG="--prefix=$PWD/dist"
> + - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user"
> + - TEST_CMD="make install -j3"
> + - QEMU_VERSION="${TRAVIS_TAG:1}"
> + - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
> + before_script:
> + - command -v ccache && ccache --zero-stats
> + - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
> + script:
> + - make -C ${SRC_DIR} qemu-${QEMU_VERSION}.tar.bz2
> + - ls -l ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2
> + - tar -xf ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION}
> + - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
> + - make install
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v2] .travis.yml: Test the release tarball
2019-10-18 14:40 ` Philippe Mathieu-Daudé
@ 2019-10-18 15:56 ` Alex Bennée
2019-10-18 17:08 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 4+ messages in thread
From: Alex Bennée @ 2019-10-18 15:56 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Fam Zheng, Michael Roth, Michael Tokarev, qemu-devel,
Bruce Rogers
Philippe Mathieu-Daudé <philmd@redhat.com> writes:
> ping?
I've pulled it into testing/next to play but I was wondering if it was
worth it given how infrequently it would run...
>
> On 10/7/19 6:04 PM, Philippe Mathieu-Daudé wrote:
>> Add a job to generate the release tarball and build/install few
>> QEMU targets from it.
>> Ideally we should build the 'efi' target from the 'roms' directory,
>> but it is too time consuming.
>> This job is only triggered when a tag starting with 'v' is pushed,
>> which is the case with release candidate tags.
>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> ---
>> v2: addressed mdroth comments
>> This job is quick enough: Ran for 16 min 33 sec
>> https://travis-ci.org/philmd/qemu/jobs/594565293
>> Based-on: <20191007133540.30623-1-philmd@redhat.com>
>> pull request including "Fix tarball builds of UEFI/EDK2 firmware"
>> https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html
>> ---
>> .travis.yml | 23 +++++++++++++++++++++++
>> 1 file changed, 23 insertions(+)
>> diff --git a/.travis.yml b/.travis.yml
>> index d0b9e099b9..d881ea0849 100644
>> --- a/.travis.yml
>> +++ b/.travis.yml
>> @@ -339,3 +339,26 @@ matrix:
>> - CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
>> - TEST_CMD="make -j3 check-tcg V=1"
>> - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
>> +
>> +
>> + # Release builds
>> + # The make-release script expect a QEMU version, so our tag must start with a 'v'.
>> + # This is the case when release candidate tags are created.
>> + - if: tag IS present AND tag =~ /^v\d+\.\d+(\.\d+)?(-\S*)?$/
>> + env:
>> + # We want to build from the release tarball
>> + - BUILD_DIR="release/build/dir" SRC_DIR="../../.."
>> + - BASE_CONFIG="--prefix=$PWD/dist"
>> + - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user"
>> + - TEST_CMD="make install -j3"
>> + - QEMU_VERSION="${TRAVIS_TAG:1}"
>> + - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
>> + before_script:
>> + - command -v ccache && ccache --zero-stats
>> + - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
>> + script:
>> + - make -C ${SRC_DIR} qemu-${QEMU_VERSION}.tar.bz2
>> + - ls -l ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2
>> + - tar -xf ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION}
>> + - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
>> + - make install
>>
--
Alex Bennée
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v2] .travis.yml: Test the release tarball
2019-10-18 15:56 ` Alex Bennée
@ 2019-10-18 17:08 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 4+ messages in thread
From: Philippe Mathieu-Daudé @ 2019-10-18 17:08 UTC (permalink / raw)
To: Alex Bennée
Cc: Fam Zheng, Michael Roth, Michael Tokarev, qemu-devel,
Bruce Rogers
On 10/18/19 5:56 PM, Alex Bennée wrote:
>
> Philippe Mathieu-Daudé <philmd@redhat.com> writes:
>
>> ping?
>
> I've pulled it into testing/next to play but I was wondering if it was
> worth it given how infrequently it would run...
Well, it will run when we tag release candidate and catch eventual bugs
before we tag the final release. The idea is to avoid the same mistake
we did with the last release that Bruce spotted.
>> On 10/7/19 6:04 PM, Philippe Mathieu-Daudé wrote:
>>> Add a job to generate the release tarball and build/install few
>>> QEMU targets from it.
>>> Ideally we should build the 'efi' target from the 'roms' directory,
>>> but it is too time consuming.
>>> This job is only triggered when a tag starting with 'v' is pushed,
>>> which is the case with release candidate tags.
>>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>> ---
>>> v2: addressed mdroth comments
>>> This job is quick enough: Ran for 16 min 33 sec
>>> https://travis-ci.org/philmd/qemu/jobs/594565293
>>> Based-on: <20191007133540.30623-1-philmd@redhat.com>
>>> pull request including "Fix tarball builds of UEFI/EDK2 firmware"
>>> https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html
>>> ---
>>> .travis.yml | 23 +++++++++++++++++++++++
>>> 1 file changed, 23 insertions(+)
>>> diff --git a/.travis.yml b/.travis.yml
>>> index d0b9e099b9..d881ea0849 100644
>>> --- a/.travis.yml
>>> +++ b/.travis.yml
>>> @@ -339,3 +339,26 @@ matrix:
>>> - CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
>>> - TEST_CMD="make -j3 check-tcg V=1"
>>> - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
>>> +
>>> +
>>> + # Release builds
>>> + # The make-release script expect a QEMU version, so our tag must start with a 'v'.
>>> + # This is the case when release candidate tags are created.
>>> + - if: tag IS present AND tag =~ /^v\d+\.\d+(\.\d+)?(-\S*)?$/
>>> + env:
>>> + # We want to build from the release tarball
>>> + - BUILD_DIR="release/build/dir" SRC_DIR="../../.."
>>> + - BASE_CONFIG="--prefix=$PWD/dist"
>>> + - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user"
>>> + - TEST_CMD="make install -j3"
>>> + - QEMU_VERSION="${TRAVIS_TAG:1}"
>>> + - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
>>> + before_script:
>>> + - command -v ccache && ccache --zero-stats
>>> + - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
>>> + script:
>>> + - make -C ${SRC_DIR} qemu-${QEMU_VERSION}.tar.bz2
>>> + - ls -l ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2
>>> + - tar -xf ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION}
>>> + - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
>>> + - make install
>>>
>
>
> --
> Alex Bennée
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-18 17:09 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-07 16:04 [PATCH v2] .travis.yml: Test the release tarball Philippe Mathieu-Daudé
2019-10-18 14:40 ` Philippe Mathieu-Daudé
2019-10-18 15:56 ` Alex Bennée
2019-10-18 17:08 ` Philippe Mathieu-Daudé
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).