qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Fabiano Rosas <farosas@suse.de>
To: Prasad Pandit <ppandit@redhat.com>, qemu-devel@nongnu.org
Cc: peterx@redhat.com, berrange@redhat.com,
	Prasad Pandit <pjp@fedoraproject.org>
Subject: Re: [PATCH v6 4/4] tests/qtest/migration: add postcopy tests with multifd
Date: Mon, 17 Feb 2025 12:33:02 -0300	[thread overview]
Message-ID: <871pvwvb69.fsf@suse.de> (raw)
In-Reply-To: <20250215123119.814345-5-ppandit@redhat.com>

Prasad Pandit <ppandit@redhat.com> writes:

> From: Prasad Pandit <pjp@fedoraproject.org>
>
> Add new qtests to run postcopy migration with multifd
> channels enabled.
>
> Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
> ---
>  tests/qtest/migration/compression-tests.c | 13 ++++++++
>  tests/qtest/migration/framework.c         |  4 +++
>  tests/qtest/migration/postcopy-tests.c    | 23 +++++++++++++
>  tests/qtest/migration/precopy-tests.c     | 19 +++++++++++
>  tests/qtest/migration/tls-tests.c         | 40 +++++++++++++++++++++++
>  5 files changed, 99 insertions(+)
>
> v6:
> - Reorder, make this the second patch in this series.
>
> v5:
> - https://lore.kernel.org/qemu-devel/20250205122712.229151-1-ppandit@redhat.com/T/#t
>
> diff --git a/tests/qtest/migration/compression-tests.c b/tests/qtest/migration/compression-tests.c
> index 4558a7b9ff..d4d6b3c4de 100644
> --- a/tests/qtest/migration/compression-tests.c
> +++ b/tests/qtest/migration/compression-tests.c
> @@ -40,6 +40,17 @@ static void test_multifd_tcp_zstd(void)
>      };
>      test_precopy_common(&args);
>  }
> +
> +static void test_multifd_postcopy_tcp_zstd(void)
> +{
> +    MigrateCommon args = {
> +        .listen_uri = "defer",
> +        .caps[MIGRATION_CAPABILITY_POSTCOPY_RAM] = true,
> +        .start_hook = migrate_hook_start_precopy_tcp_multifd_zstd,
> +    };
> +
> +    test_precopy_common(&args);
> +}
>  #endif /* CONFIG_ZSTD */
>  
>  #ifdef CONFIG_QATZIP
> @@ -172,6 +183,8 @@ void migration_test_add_compression(MigrationTestEnv *env)
>  #ifdef CONFIG_ZSTD
>      migration_test_add("/migration/multifd/tcp/plain/zstd",
>                         test_multifd_tcp_zstd);
> +    migration_test_add("/migration/multifd+postcopy/tcp/plain/zstd",
> +                       test_multifd_postcopy_tcp_zstd);
>  #endif
>  
>  #ifdef CONFIG_QATZIP
> diff --git a/tests/qtest/migration/framework.c b/tests/qtest/migration/framework.c
> index 82aaa13e85..2396405b51 100644
> --- a/tests/qtest/migration/framework.c
> +++ b/tests/qtest/migration/framework.c
> @@ -469,6 +469,10 @@ static int migrate_postcopy_prepare(QTestState **from_ptr,
>      args->caps[MIGRATION_CAPABILITY_POSTCOPY_BLOCKTIME] = true;
>      args->caps[MIGRATION_CAPABILITY_POSTCOPY_RAM] = true;
>      set_migration_capabilities(from, to, args);
> +    if (args->caps[MIGRATION_CAPABILITY_MULTIFD]) {
> +        migrate_set_parameter_int(from, "multifd-channels", 8);
> +        migrate_set_parameter_int(to, "multifd-channels", 8);
> +    }
>  
>      migrate_ensure_non_converge(from);
>      migrate_prepare_for_dirty_mem(from);
> diff --git a/tests/qtest/migration/postcopy-tests.c b/tests/qtest/migration/postcopy-tests.c
> index b0e70a6367..32fe7b0324 100644
> --- a/tests/qtest/migration/postcopy-tests.c
> +++ b/tests/qtest/migration/postcopy-tests.c
> @@ -90,6 +90,25 @@ static void migration_test_add_postcopy_smoke(MigrationTestEnv *env)
>      }
>  }
>  
> +static void test_multifd_postcopy(void)
> +{
> +    MigrateCommon args = {
> +        .caps[MIGRATION_CAPABILITY_MULTIFD] = true,
> +    };
> +
> +    test_postcopy_common(&args);
> +}
> +
> +static void test_multifd_postcopy_preempt(void)
> +{
> +    MigrateCommon args = {
> +        .caps[MIGRATION_CAPABILITY_MULTIFD] = true,
> +        .caps[MIGRATION_CAPABILITY_POSTCOPY_PREEMPT] = true,
> +    };
> +
> +    test_postcopy_common(&args);
> +}
> +
>  void migration_test_add_postcopy(MigrationTestEnv *env)
>  {
>      migration_test_add_postcopy_smoke(env);
> @@ -110,6 +129,10 @@ void migration_test_add_postcopy(MigrationTestEnv *env)
>              "/migration/postcopy/recovery/double-failures/reconnect",
>              test_postcopy_recovery_fail_reconnect);
>  
> +        migration_test_add("/migration/multifd+postcopy/plain",
> +                           test_multifd_postcopy);
> +        migration_test_add("/migration/multifd+postcopy/preempt/plain",
> +                           test_multifd_postcopy_preempt);

For postcopy-tests.c I'd use /migration/postcopy/multifd so we can run
them all via command-line. These are also the only ones actually doing
postcopy migration. We need to distinguish multifd+postcopy proper from
merely postcopy-ram=true.

>          if (env->is_x86) {
>              migration_test_add("/migration/postcopy/suspend",
>                                 test_postcopy_suspend);
> diff --git a/tests/qtest/migration/precopy-tests.c b/tests/qtest/migration/precopy-tests.c
> index e5d8c49dbe..2126cb8e2c 100644
> --- a/tests/qtest/migration/precopy-tests.c
> +++ b/tests/qtest/migration/precopy-tests.c
> @@ -33,6 +33,7 @@
>  #define DIRTYLIMIT_TOLERANCE_RANGE  25  /* MB/s */
>  
>  static char *tmpfs;
> +static bool postcopy_ram = false;
>  
>  static void test_precopy_unix_plain(void)
>  {
> @@ -465,6 +466,11 @@ static void test_multifd_tcp_cancel(void)
>      migrate_ensure_non_converge(from);
>      migrate_prepare_for_dirty_mem(from);
>  
> +    if (postcopy_ram) {
> +        migrate_set_capability(from, "postcopy-ram", true);
> +        migrate_set_capability(to, "postcopy-ram", true);
> +    }
> +
>      migrate_set_parameter_int(from, "multifd-channels", 16);
>      migrate_set_parameter_int(to, "multifd-channels", 16);
>  
> @@ -506,6 +512,10 @@ static void test_multifd_tcp_cancel(void)
>          return;
>      }
>  
> +    if (postcopy_ram) {
> +        migrate_set_capability(to2, "postcopy-ram", true);
> +    }
> +
>      migrate_set_parameter_int(to2, "multifd-channels", 16);
>  
>      migrate_set_capability(to2, "multifd", true);
> @@ -529,6 +539,13 @@ static void test_multifd_tcp_cancel(void)
>      migrate_end(from, to2, true);
>  }
>  
> +static void test_multifd_postcopy_tcp_cancel(void)
> +{
> +    postcopy_ram = true;
> +    test_multifd_tcp_cancel();
> +    postcopy_ram = false;

You could pass this in, there's just one other caller.

> +}
> +
>  static void calc_dirty_rate(QTestState *who, uint64_t calc_time)
>  {
>      qtest_qmp_assert_success(who,
> @@ -1001,6 +1018,8 @@ void migration_test_add_precopy(MigrationTestEnv *env)
>                         test_multifd_tcp_zero_page_legacy);
>      migration_test_add("/migration/multifd/tcp/plain/zero-page/none",
>                         test_multifd_tcp_no_zero_page);
> +    migration_test_add("migration/multifd+postcopy/tcp/plain/cancel",
> +                       test_multifd_postcopy_tcp_cancel);
>      if (g_str_equal(env->arch, "x86_64")
>          && env->has_kvm && env->has_dirty_ring) {
>  
> diff --git a/tests/qtest/migration/tls-tests.c b/tests/qtest/migration/tls-tests.c
> index 30ab79e058..ce57f0cb5d 100644
> --- a/tests/qtest/migration/tls-tests.c
> +++ b/tests/qtest/migration/tls-tests.c
> @@ -393,6 +393,17 @@ static void test_postcopy_recovery_tls_psk(void)
>      test_postcopy_recovery_common(&args);
>  }
>  
> +static void test_multifd_postcopy_recovery_tls_psk(void)
> +{
> +    MigrateCommon args = {
> +        .start_hook = migrate_hook_start_tls_psk_match,
> +        .end_hook = migrate_hook_end_tls_psk,
> +        .caps[MIGRATION_CAPABILITY_MULTIFD] = true,
> +    };
> +
> +    test_postcopy_recovery_common(&args);
> +}
> +
>  /* This contains preempt+recovery+tls test altogether */
>  static void test_postcopy_preempt_all(void)
>  {
> @@ -405,6 +416,17 @@ static void test_postcopy_preempt_all(void)
>      test_postcopy_recovery_common(&args);
>  }
>  
> +static void test_multifd_postcopy_preempt_recovery_tls_psk(void)
> +{
> +    MigrateCommon args = {
> +        .start_hook = migrate_hook_start_tls_psk_match,
> +        .end_hook = migrate_hook_end_tls_psk,
> +        .caps[MIGRATION_CAPABILITY_MULTIFD] = true,
> +    };
> +
> +    test_postcopy_recovery_common(&args);
> +}
> +
>  static void test_precopy_unix_tls_psk(void)
>  {
>      g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
> @@ -651,6 +673,18 @@ static void test_multifd_tcp_tls_psk_mismatch(void)
>      test_precopy_common(&args);
>  }
>  
> +static void test_multifd_postcopy_tcp_tls_psk_match(void)
> +{
> +    MigrateCommon args = {
> +        .listen_uri = "defer",
> +        .caps[MIGRATION_CAPABILITY_MULTIFD] = true,
> +        .start_hook = migrate_hook_start_multifd_tcp_tls_psk_match,
> +        .end_hook = migrate_hook_end_tls_psk,
> +    };
> +
> +    test_precopy_common(&args);
> +}
> +
>  #ifdef CONFIG_TASN1
>  static void test_multifd_tcp_tls_x509_default_host(void)
>  {
> @@ -762,6 +796,10 @@ void migration_test_add_tls(MigrationTestEnv *env)
>                             test_postcopy_preempt_tls_psk);
>          migration_test_add("/migration/postcopy/preempt/recovery/tls/psk",
>                             test_postcopy_preempt_all);
> +        migration_test_add("/migration/multifd+postcopy/recovery/tls/psk",
> +                           test_multifd_postcopy_recovery_tls_psk);
> +        migration_test_add("/migration/multifd+postcopy/preempt/recovery/tls/psk",
> +                           test_multifd_postcopy_preempt_recovery_tls_psk);
>      }
>  #ifdef CONFIG_TASN1
>      migration_test_add("/migration/precopy/unix/tls/x509/default-host",
> @@ -793,6 +831,8 @@ void migration_test_add_tls(MigrationTestEnv *env)
>                         test_multifd_tcp_tls_psk_match);
>      migration_test_add("/migration/multifd/tcp/tls/psk/mismatch",
>                         test_multifd_tcp_tls_psk_mismatch);
> +    migration_test_add("/migration/multifd+postcopy/tcp/tls/psk/match",
> +                       test_multifd_postcopy_tcp_tls_psk_match);
>  #ifdef CONFIG_TASN1
>      migration_test_add("/migration/multifd/tcp/tls/x509/default-host",
>                         test_multifd_tcp_tls_x509_default_host);
> --
> 2.48.1


  reply	other threads:[~2025-02-17 15:34 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-15 12:31 [PATCH v6 0/4] Allow to enable multifd and postcopy migration together Prasad Pandit
2025-02-15 12:31 ` [PATCH v6 1/4] migration/multifd: move macros to multifd header Prasad Pandit
2025-02-15 12:31 ` [PATCH v6 2/4] migration: enable multifd and postcopy together Prasad Pandit
2025-02-17 21:49   ` Fabiano Rosas
2025-02-18  8:17     ` Prasad Pandit
2025-02-18 14:22       ` Fabiano Rosas
2025-02-19 11:57         ` Prasad Pandit
2025-02-19 17:22           ` Fabiano Rosas
2025-02-20  9:47             ` Prasad Pandit
2025-02-20 13:36               ` Fabiano Rosas
2025-02-21  8:44                 ` Prasad Pandit
2025-02-18 11:17   ` Juraj Marcin
2025-02-19  7:13     ` Prasad Pandit
2025-02-15 12:31 ` [PATCH v6 3/4] tests/qtest/migration: consolidate set capabilities Prasad Pandit
2025-02-17 15:17   ` Fabiano Rosas
2025-02-18  8:53     ` Prasad Pandit
2025-02-15 12:31 ` [PATCH v6 4/4] tests/qtest/migration: add postcopy tests with multifd Prasad Pandit
2025-02-17 15:33   ` Fabiano Rosas [this message]
2025-02-18  8:58     ` Prasad Pandit
2025-02-18 14:28       ` Fabiano Rosas
2025-02-25  7:25         ` Prasad Pandit
2025-02-25 13:07           ` Fabiano Rosas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=871pvwvb69.fsf@suse.de \
    --to=farosas@suse.de \
    --cc=berrange@redhat.com \
    --cc=peterx@redhat.com \
    --cc=pjp@fedoraproject.org \
    --cc=ppandit@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).