From: Fabiano Rosas <farosas@suse.de>
To: Hao Xiang <hao.xiang@bytedance.com>, peterx@redhat.com
Cc: qemu-devel@nongnu.org, Bryan Zhang <bryan.zhang@bytedance.com>,
Avihai Horon <avihaih@nvidia.com>, Yuan Liu <yuan1.liu@intel.com>,
Prasad Pandit <ppandit@redhat.com>
Subject: Re: [External] [PATCH v2 05/23] migration/multifd: Drop MultiFDSendParams.normal[] array
Date: Fri, 09 Feb 2024 09:20:15 -0300 [thread overview]
Message-ID: <871q9lde2o.fsf@suse.de> (raw)
In-Reply-To: <CAAYibXiZ-c5zQutHHvL6-bO2yotPX=LQOmjj=HhhwmrAHc+2dA@mail.gmail.com>
Hao Xiang <hao.xiang@bytedance.com> writes:
> On Fri, Feb 2, 2024 at 2:30 AM <peterx@redhat.com> wrote:
>>
>> From: Peter Xu <peterx@redhat.com>
>>
>> This array is redundant when p->pages exists. Now we extended the life of
>> p->pages to the whole period where pending_job is set, it should be safe to
>> always use p->pages->offset[] rather than p->normal[]. Drop the array.
>>
>> Alongside, the normal_num is also redundant, which is the same to
>> p->pages->num.
>
> Can we not drop p->normal and p_normal_num? It is redundant now but I
> think it will be needed for multifd zero page checking. In multifd
> zero page, we find out all zero pages and we sort the normal pages and
> zero pages in two seperate arrays. p->offset is the original array of
> pages, p->normal will contain the array of normal pages and p->zero
> will contain the array of zero pages.
We're moving send_fill_packet into send_prepare(), so you should be able
to do whatever data transformation at send_prepare() and add any fields
you need into p->pages.
If we keep p->normal we will not be able to switch into an opaque
payload later on. There should be no mention of pages outside of
hooks. This is long-term work, but let's avoid blocking it if possible.
>>
>> This doesn't apply to recv side, because there's no extra buffering on recv
>> side, so p->normal[] array is still needed.
>>
>> Reviewed-by: Fabiano Rosas <farosas@suse.de>
>> Signed-off-by: Peter Xu <peterx@redhat.com>
>> ---
>> migration/multifd.h | 4 ----
>> migration/multifd-zlib.c | 7 ++++---
>> migration/multifd-zstd.c | 7 ++++---
>> migration/multifd.c | 33 +++++++++++++--------------------
>> 4 files changed, 21 insertions(+), 30 deletions(-)
>>
>> diff --git a/migration/multifd.h b/migration/multifd.h
>> index 7c040cb85a..3920bdbcf1 100644
>> --- a/migration/multifd.h
>> +++ b/migration/multifd.h
>> @@ -122,10 +122,6 @@ typedef struct {
>> struct iovec *iov;
>> /* number of iovs used */
>> uint32_t iovs_num;
>> - /* Pages that are not zero */
>> - ram_addr_t *normal;
>> - /* num of non zero pages */
>> - uint32_t normal_num;
>> /* used for compression methods */
>> void *data;
>> } MultiFDSendParams;
>> diff --git a/migration/multifd-zlib.c b/migration/multifd-zlib.c
>> index 37ce48621e..100809abc1 100644
>> --- a/migration/multifd-zlib.c
>> +++ b/migration/multifd-zlib.c
>> @@ -116,17 +116,18 @@ static void zlib_send_cleanup(MultiFDSendParams *p, Error **errp)
>> */
>> static int zlib_send_prepare(MultiFDSendParams *p, Error **errp)
>> {
>> + MultiFDPages_t *pages = p->pages;
>> struct zlib_data *z = p->data;
>> z_stream *zs = &z->zs;
>> uint32_t out_size = 0;
>> int ret;
>> uint32_t i;
>>
>> - for (i = 0; i < p->normal_num; i++) {
>> + for (i = 0; i < pages->num; i++) {
>> uint32_t available = z->zbuff_len - out_size;
>> int flush = Z_NO_FLUSH;
>>
>> - if (i == p->normal_num - 1) {
>> + if (i == pages->num - 1) {
>> flush = Z_SYNC_FLUSH;
>> }
>>
>> @@ -135,7 +136,7 @@ static int zlib_send_prepare(MultiFDSendParams *p, Error **errp)
>> * with compression. zlib does not guarantee that this is safe,
>> * therefore copy the page before calling deflate().
>> */
>> - memcpy(z->buf, p->pages->block->host + p->normal[i], p->page_size);
>> + memcpy(z->buf, p->pages->block->host + pages->offset[i], p->page_size);
>> zs->avail_in = p->page_size;
>> zs->next_in = z->buf;
>>
>> diff --git a/migration/multifd-zstd.c b/migration/multifd-zstd.c
>> index b471daadcd..2023edd8cc 100644
>> --- a/migration/multifd-zstd.c
>> +++ b/migration/multifd-zstd.c
>> @@ -113,6 +113,7 @@ static void zstd_send_cleanup(MultiFDSendParams *p, Error **errp)
>> */
>> static int zstd_send_prepare(MultiFDSendParams *p, Error **errp)
>> {
>> + MultiFDPages_t *pages = p->pages;
>> struct zstd_data *z = p->data;
>> int ret;
>> uint32_t i;
>> @@ -121,13 +122,13 @@ static int zstd_send_prepare(MultiFDSendParams *p, Error **errp)
>> z->out.size = z->zbuff_len;
>> z->out.pos = 0;
>>
>> - for (i = 0; i < p->normal_num; i++) {
>> + for (i = 0; i < pages->num; i++) {
>> ZSTD_EndDirective flush = ZSTD_e_continue;
>>
>> - if (i == p->normal_num - 1) {
>> + if (i == pages->num - 1) {
>> flush = ZSTD_e_flush;
>> }
>> - z->in.src = p->pages->block->host + p->normal[i];
>> + z->in.src = p->pages->block->host + pages->offset[i];
>> z->in.size = p->page_size;
>> z->in.pos = 0;
>>
>> diff --git a/migration/multifd.c b/migration/multifd.c
>> index 5633ac245a..8bb1fd95cf 100644
>> --- a/migration/multifd.c
>> +++ b/migration/multifd.c
>> @@ -90,13 +90,13 @@ static int nocomp_send_prepare(MultiFDSendParams *p, Error **errp)
>> {
>> MultiFDPages_t *pages = p->pages;
>>
>> - for (int i = 0; i < p->normal_num; i++) {
>> - p->iov[p->iovs_num].iov_base = pages->block->host + p->normal[i];
>> + for (int i = 0; i < pages->num; i++) {
>> + p->iov[p->iovs_num].iov_base = pages->block->host + pages->offset[i];
>> p->iov[p->iovs_num].iov_len = p->page_size;
>> p->iovs_num++;
>> }
>>
>> - p->next_packet_size = p->normal_num * p->page_size;
>> + p->next_packet_size = pages->num * p->page_size;
>> p->flags |= MULTIFD_FLAG_NOCOMP;
>> return 0;
>> }
>> @@ -269,21 +269,22 @@ static void multifd_pages_clear(MultiFDPages_t *pages)
>> static void multifd_send_fill_packet(MultiFDSendParams *p)
>> {
>> MultiFDPacket_t *packet = p->packet;
>> + MultiFDPages_t *pages = p->pages;
>> int i;
>>
>> packet->flags = cpu_to_be32(p->flags);
>> packet->pages_alloc = cpu_to_be32(p->pages->allocated);
>> - packet->normal_pages = cpu_to_be32(p->normal_num);
>> + packet->normal_pages = cpu_to_be32(pages->num);
>> packet->next_packet_size = cpu_to_be32(p->next_packet_size);
>> packet->packet_num = cpu_to_be64(p->packet_num);
>>
>> - if (p->pages->block) {
>> - strncpy(packet->ramblock, p->pages->block->idstr, 256);
>> + if (pages->block) {
>> + strncpy(packet->ramblock, pages->block->idstr, 256);
>> }
>>
>> - for (i = 0; i < p->normal_num; i++) {
>> + for (i = 0; i < pages->num; i++) {
>> /* there are architectures where ram_addr_t is 32 bit */
>> - uint64_t temp = p->normal[i];
>> + uint64_t temp = pages->offset[i];
>>
>> packet->offset[i] = cpu_to_be64(temp);
>> }
>> @@ -570,8 +571,6 @@ void multifd_save_cleanup(void)
>> p->packet = NULL;
>> g_free(p->iov);
>> p->iov = NULL;
>> - g_free(p->normal);
>> - p->normal = NULL;
>> multifd_send_state->ops->send_cleanup(p, &local_err);
>> if (local_err) {
>> migrate_set_error(migrate_get_current(), local_err);
>> @@ -688,8 +687,8 @@ static void *multifd_send_thread(void *opaque)
>>
>> if (p->pending_job) {
>> uint64_t packet_num = p->packet_num;
>> + MultiFDPages_t *pages = p->pages;
>> uint32_t flags;
>> - p->normal_num = 0;
>>
>> if (use_zero_copy_send) {
>> p->iovs_num = 0;
>> @@ -697,12 +696,7 @@ static void *multifd_send_thread(void *opaque)
>> p->iovs_num = 1;
>> }
>>
>> - for (int i = 0; i < p->pages->num; i++) {
>> - p->normal[p->normal_num] = p->pages->offset[i];
>> - p->normal_num++;
>> - }
>> -
>> - if (p->normal_num) {
>> + if (pages->num) {
>> ret = multifd_send_state->ops->send_prepare(p, &local_err);
>> if (ret != 0) {
>> qemu_mutex_unlock(&p->mutex);
>> @@ -713,10 +707,10 @@ static void *multifd_send_thread(void *opaque)
>> flags = p->flags;
>> p->flags = 0;
>> p->num_packets++;
>> - p->total_normal_pages += p->normal_num;
>> + p->total_normal_pages += pages->num;
>> qemu_mutex_unlock(&p->mutex);
>>
>> - trace_multifd_send(p->id, packet_num, p->normal_num, flags,
>> + trace_multifd_send(p->id, packet_num, pages->num, flags,
>> p->next_packet_size);
>>
>> if (use_zero_copy_send) {
>> @@ -924,7 +918,6 @@ int multifd_save_setup(Error **errp)
>> p->name = g_strdup_printf("multifdsend_%d", i);
>> /* We need one extra place for the packet header */
>> p->iov = g_new0(struct iovec, page_count + 1);
>> - p->normal = g_new0(ram_addr_t, page_count);
>> p->page_size = qemu_target_page_size();
>> p->page_count = page_count;
>>
>> --
>> 2.43.0
>>
next prev parent reply other threads:[~2024-02-09 12:21 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-02 10:28 [PATCH v2 00/23] migration/multifd: Refactor ->send_prepare() and cleanups peterx
2024-02-02 10:28 ` [PATCH v2 01/23] migration/multifd: Drop stale comment for multifd zero copy peterx
2024-02-02 10:28 ` [PATCH v2 02/23] migration/multifd: multifd_send_kick_main() peterx
2024-02-02 10:28 ` [PATCH v2 03/23] migration/multifd: Drop MultiFDSendParams.quit, cleanup error paths peterx
2024-02-02 19:15 ` Fabiano Rosas
2024-02-02 10:28 ` [PATCH v2 04/23] migration/multifd: Postpone reset of MultiFDPages_t peterx
2024-02-02 10:28 ` [PATCH v2 05/23] migration/multifd: Drop MultiFDSendParams.normal[] array peterx
2024-02-09 0:06 ` [External] " Hao Xiang
2024-02-09 12:20 ` Fabiano Rosas [this message]
2024-02-14 2:16 ` Hao Xiang
2024-02-14 17:17 ` Fabiano Rosas
2024-02-02 10:28 ` [PATCH v2 06/23] migration/multifd: Separate SYNC request with normal jobs peterx
2024-02-02 19:21 ` Fabiano Rosas
2024-02-02 10:28 ` [PATCH v2 07/23] migration/multifd: Simplify locking in sender thread peterx
2024-02-02 19:23 ` Fabiano Rosas
2024-02-02 10:28 ` [PATCH v2 08/23] migration/multifd: Drop pages->num check " peterx
2024-02-02 10:28 ` [PATCH v2 09/23] migration/multifd: Rename p->num_packets and clean it up peterx
2024-02-02 10:28 ` [PATCH v2 10/23] migration/multifd: Move total_normal_pages accounting peterx
2024-02-02 10:28 ` [PATCH v2 11/23] migration/multifd: Move trace_multifd_send|recv() peterx
2024-02-02 10:28 ` [PATCH v2 12/23] migration/multifd: multifd_send_prepare_header() peterx
2024-02-02 10:28 ` [PATCH v2 13/23] migration/multifd: Move header prepare/fill into send_prepare() peterx
2024-02-02 19:26 ` Fabiano Rosas
2024-02-02 10:28 ` [PATCH v2 14/23] migration/multifd: Forbid spurious wakeups peterx
2024-02-02 10:28 ` [PATCH v2 15/23] migration/multifd: Split multifd_send_terminate_threads() peterx
2024-02-02 19:28 ` Fabiano Rosas
2024-02-02 10:28 ` [PATCH v2 16/23] migration/multifd: Change retval of multifd_queue_page() peterx
2024-02-02 19:29 ` Fabiano Rosas
2024-02-02 10:28 ` [PATCH v2 17/23] migration/multifd: Change retval of multifd_send_pages() peterx
2024-02-02 19:30 ` Fabiano Rosas
2024-02-02 10:28 ` [PATCH v2 18/23] migration/multifd: Rewrite multifd_queue_page() peterx
2024-02-02 20:47 ` Fabiano Rosas
2024-02-05 4:03 ` Peter Xu
2024-02-02 10:28 ` [PATCH v2 19/23] migration/multifd: Cleanup multifd_save_cleanup() peterx
2024-02-02 20:54 ` Fabiano Rosas
2024-02-05 4:25 ` Peter Xu
2024-02-02 10:28 ` [PATCH v2 20/23] migration/multifd: Cleanup multifd_load_cleanup() peterx
2024-02-02 20:55 ` Fabiano Rosas
2024-02-02 10:28 ` [PATCH v2 21/23] migration/multifd: Stick with send/recv on function names peterx
2024-02-02 21:03 ` Fabiano Rosas
2024-02-02 10:28 ` [PATCH v2 22/23] migration/multifd: Fix MultiFDSendParams.packet_num race peterx
2024-02-02 21:08 ` Fabiano Rosas
2024-02-05 4:05 ` Peter Xu
2024-02-02 10:28 ` [PATCH v2 23/23] migration/multifd: Optimize sender side to be lockless peterx
2024-02-02 21:34 ` Fabiano Rosas
2024-02-05 4:35 ` Peter Xu
2024-02-05 14:10 ` Fabiano Rosas
2024-02-05 14:24 ` Peter Xu
2024-02-05 17:59 ` Fabiano Rosas
2024-02-06 3:05 ` [PATCH v2 00/23] migration/multifd: Refactor ->send_prepare() and cleanups Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871q9lde2o.fsf@suse.de \
--to=farosas@suse.de \
--cc=avihaih@nvidia.com \
--cc=bryan.zhang@bytedance.com \
--cc=hao.xiang@bytedance.com \
--cc=peterx@redhat.com \
--cc=ppandit@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=yuan1.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).