From: "Alex Bennée" <alex.bennee@linaro.org>
To: qemu-devel@nongnu.org
Cc: lizhijian@cn.fujitsu.com, jan.kiszka@siemens.com,
jasowang@redhat.com, pbonzini@redhat.com, stefanha@redhat.com,
zhangckid@gmail.com,
Samuel Thibault <samuel.thibault@ens-lyon.org>
Subject: Re: [Qemu-devel] [PATCH] slirp: replace QEMU_BUILD_BUG_ON with G_STATIC_ASSERT
Date: Mon, 28 Jan 2019 10:35:37 +0000 [thread overview]
Message-ID: <8736pdnk7a.fsf@linaro.org> (raw)
In-Reply-To: <20190127114659.12881-1-samuel.thibault@ens-lyon.org>
Samuel Thibault <samuel.thibault@ens-lyon.org> writes:
> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Is there a rationale as to why we should replace QEMU_BUILD_BUG_ON with
G_STATIC_ASSERT or is it particular to these QEMU_BUILD_BUG_ON
instances? It would be nice to have a little more context in the commit
message.
Otherwise the changes themselves look fine.
> ---
> slirp/ip.h | 4 ++--
> slirp/ip6.h | 4 ++--
> slirp/ip6_icmp.h | 10 +++++-----
> 3 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/slirp/ip.h b/slirp/ip.h
> index 2baeeb9a3a..73a4d2a3d2 100644
> --- a/slirp/ip.h
> +++ b/slirp/ip.h
> @@ -229,8 +229,8 @@ struct ipasfrag {
> struct ip ipf_ip;
> };
>
> -QEMU_BUILD_BUG_ON(offsetof(struct ipq, frag_link) !=
> - offsetof(struct ipasfrag, ipf_link));
> +G_STATIC_ASSERT(offsetof(struct ipq, frag_link) ==
> + offsetof(struct ipasfrag, ipf_link));
>
> #define ipf_off ipf_ip.ip_off
> #define ipf_tos ipf_ip.ip_tos
> diff --git a/slirp/ip6.h b/slirp/ip6.h
> index 4e7c366505..5361bd7449 100644
> --- a/slirp/ip6.h
> +++ b/slirp/ip6.h
> @@ -152,7 +152,7 @@ struct ip6_pseudohdr {
> * If we marked the struct as packed then we would be unable to take
> * the address of any of the fields in it.
> */
> -QEMU_BUILD_BUG_ON(sizeof(struct ip6) != 40);
> -QEMU_BUILD_BUG_ON(sizeof(struct ip6_pseudohdr) != 40);
> +G_STATIC_ASSERT(sizeof(struct ip6) == 40);
> +G_STATIC_ASSERT(sizeof(struct ip6_pseudohdr) == 40);
>
> #endif
> diff --git a/slirp/ip6_icmp.h b/slirp/ip6_icmp.h
> index 3f44ed2f49..e8ed753db5 100644
> --- a/slirp/ip6_icmp.h
> +++ b/slirp/ip6_icmp.h
> @@ -50,14 +50,14 @@ struct ndp_ra { /* Router Advertisement Message */
> uint32_t retrans_time; /* Retrans Timer */
> };
>
> -QEMU_BUILD_BUG_ON(sizeof(struct ndp_ra) != 12);
> +G_STATIC_ASSERT(sizeof(struct ndp_ra) == 12);
>
> struct ndp_ns { /* Neighbor Solicitation Message */
> uint32_t reserved;
> struct in6_addr target; /* Target Address */
> };
>
> -QEMU_BUILD_BUG_ON(sizeof(struct ndp_ns) != 20);
> +G_STATIC_ASSERT(sizeof(struct ndp_ns) == 20);
>
> struct ndp_na { /* Neighbor Advertisement Message */
> #if G_BYTE_ORDER == G_BIG_ENDIAN
> @@ -78,7 +78,7 @@ struct ndp_na { /* Neighbor Advertisement Message */
> struct in6_addr target; /* Target Address */
> };
>
> -QEMU_BUILD_BUG_ON(sizeof(struct ndp_na) != 20);
> +G_STATIC_ASSERT(sizeof(struct ndp_na) == 20);
>
> struct ndp_redirect {
> uint32_t reserved;
> @@ -86,7 +86,7 @@ struct ndp_redirect {
> struct in6_addr dest; /* Destination Address */
> };
>
> -QEMU_BUILD_BUG_ON(sizeof(struct ndp_redirect) != 36);
> +G_STATIC_ASSERT(sizeof(struct ndp_redirect) == 36);
>
> /*
> * Structure of an icmpv6 header.
> @@ -113,7 +113,7 @@ struct icmp6 {
> #define icmp6_redirect icmp6_body.ndp_redirect
> };
>
> -QEMU_BUILD_BUG_ON(sizeof(struct icmp6) != 40);
> +G_STATIC_ASSERT(sizeof(struct icmp6) == 40);
>
> #define ICMP6_MINLEN 4
> #define ICMP6_ERROR_MINLEN 8
--
Alex Bennée
next prev parent reply other threads:[~2019-01-28 10:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-27 11:46 [Qemu-devel] [PATCH] slirp: replace QEMU_BUILD_BUG_ON with G_STATIC_ASSERT Samuel Thibault
2019-01-27 12:02 ` Marc-André Lureau
2019-01-27 19:11 ` Richard Henderson
2019-01-28 8:31 ` Stefano Garzarella
2019-01-28 10:35 ` Alex Bennée [this message]
2019-01-28 10:39 ` Samuel Thibault
2019-01-28 11:07 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8736pdnk7a.fsf@linaro.org \
--to=alex.bennee@linaro.org \
--cc=jan.kiszka@siemens.com \
--cc=jasowang@redhat.com \
--cc=lizhijian@cn.fujitsu.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=samuel.thibault@ens-lyon.org \
--cc=stefanha@redhat.com \
--cc=zhangckid@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).