From: "Alex Bennée" <alex.bennee@linaro.org>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 06/50] target-arm: make cpu-qom.h not target specific
Date: Thu, 21 Apr 2016 11:29:20 +0100 [thread overview]
Message-ID: <8737qfuuf3.fsf@linaro.org> (raw)
In-Reply-To: <1460147350-7601-7-git-send-email-pbonzini@redhat.com>
Paolo Bonzini <pbonzini@redhat.com> writes:
> Make ARMCPU an opaque type within cpu-qom.h, and move all definitions of
> private methods, as well as all type definitions that require knowledge
> of the layout to cpu.h. This helps making files independent of NEED_CPU_H
> if they only need to pass around CPU pointers.
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> target-arm/cpu-qom.h | 178 +-------------------------------------------------
> target-arm/cpu.h | 179 ++++++++++++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 179 insertions(+), 178 deletions(-)
>
> diff --git a/target-arm/cpu-qom.h b/target-arm/cpu-qom.h
> index 1061c08..3991173 100644
> --- a/target-arm/cpu-qom.h
> +++ b/target-arm/cpu-qom.h
> @@ -22,6 +22,8 @@
>
> #include "qom/cpu.h"
>
> +struct arm_boot_info;
> +
> #define TYPE_ARM_CPU "arm-cpu"
>
> #define ARM_CPU_CLASS(klass) \
> @@ -47,145 +49,7 @@ typedef struct ARMCPUClass {
> void (*parent_reset)(CPUState *cpu);
> } ARMCPUClass;
>
> -/**
> - * ARMCPU:
> - * @env: #CPUARMState
> - *
> - * An ARM CPU core.
> - */
> -typedef struct ARMCPU {
> - /*< private >*/
> - CPUState parent_obj;
> - /*< public >*/
> -
> - CPUARMState env;
> -
> - /* Coprocessor information */
> - GHashTable *cp_regs;
> - /* For marshalling (mostly coprocessor) register state between the
> - * kernel and QEMU (for KVM) and between two QEMUs (for migration),
> - * we use these arrays.
> - */
> - /* List of register indexes managed via these arrays; (full KVM style
> - * 64 bit indexes, not CPRegInfo 32 bit indexes)
> - */
> - uint64_t *cpreg_indexes;
> - /* Values of the registers (cpreg_indexes[i]'s value is cpreg_values[i]) */
> - uint64_t *cpreg_values;
> - /* Length of the indexes, values, reset_values arrays */
> - int32_t cpreg_array_len;
> - /* These are used only for migration: incoming data arrives in
> - * these fields and is sanity checked in post_load before copying
> - * to the working data structures above.
> - */
> - uint64_t *cpreg_vmstate_indexes;
> - uint64_t *cpreg_vmstate_values;
> - int32_t cpreg_vmstate_array_len;
> -
> - /* Timers used by the generic (architected) timer */
> - QEMUTimer *gt_timer[NUM_GTIMERS];
> - /* GPIO outputs for generic timer */
> - qemu_irq gt_timer_outputs[NUM_GTIMERS];
> -
> - /* MemoryRegion to use for secure physical accesses */
> - MemoryRegion *secure_memory;
> -
> - /* 'compatible' string for this CPU for Linux device trees */
> - const char *dtb_compatible;
> -
> - /* PSCI version for this CPU
> - * Bits[31:16] = Major Version
> - * Bits[15:0] = Minor Version
> - */
> - uint32_t psci_version;
> -
> - /* Should CPU start in PSCI powered-off state? */
> - bool start_powered_off;
> - /* CPU currently in PSCI powered-off state */
> - bool powered_off;
> - /* CPU has security extension */
> - bool has_el3;
> -
> - /* CPU has memory protection unit */
> - bool has_mpu;
> - /* PMSAv7 MPU number of supported regions */
> - uint32_t pmsav7_dregion;
> -
> - /* PSCI conduit used to invoke PSCI methods
> - * 0 - disabled, 1 - smc, 2 - hvc
> - */
> - uint32_t psci_conduit;
> -
> - /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or
> - * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type.
> - */
> - uint32_t kvm_target;
> -
> - /* KVM init features for this CPU */
> - uint32_t kvm_init_features[7];
> -
> - /* Uniprocessor system with MP extensions */
> - bool mp_is_up;
> -
> - /* The instance init functions for implementation-specific subclasses
> - * set these fields to specify the implementation-dependent values of
> - * various constant registers and reset values of non-constant
> - * registers.
> - * Some of these might become QOM properties eventually.
> - * Field names match the official register names as defined in the
> - * ARMv7AR ARM Architecture Reference Manual. A reset_ prefix
> - * is used for reset values of non-constant registers; no reset_
> - * prefix means a constant register.
> - */
> - uint32_t midr;
> - uint32_t revidr;
> - uint32_t reset_fpsid;
> - uint32_t mvfr0;
> - uint32_t mvfr1;
> - uint32_t mvfr2;
> - uint32_t ctr;
> - uint32_t reset_sctlr;
> - uint32_t id_pfr0;
> - uint32_t id_pfr1;
> - uint32_t id_dfr0;
> - uint32_t pmceid0;
> - uint32_t pmceid1;
> - uint32_t id_afr0;
> - uint32_t id_mmfr0;
> - uint32_t id_mmfr1;
> - uint32_t id_mmfr2;
> - uint32_t id_mmfr3;
> - uint32_t id_mmfr4;
> - uint32_t id_isar0;
> - uint32_t id_isar1;
> - uint32_t id_isar2;
> - uint32_t id_isar3;
> - uint32_t id_isar4;
> - uint32_t id_isar5;
> - uint64_t id_aa64pfr0;
> - uint64_t id_aa64pfr1;
> - uint64_t id_aa64dfr0;
> - uint64_t id_aa64dfr1;
> - uint64_t id_aa64afr0;
> - uint64_t id_aa64afr1;
> - uint64_t id_aa64isar0;
> - uint64_t id_aa64isar1;
> - uint64_t id_aa64mmfr0;
> - uint64_t id_aa64mmfr1;
> - uint32_t dbgdidr;
> - uint32_t clidr;
> - uint64_t mp_affinity; /* MP ID without feature bits */
> - /* The elements of this array are the CCSIDR values for each cache,
> - * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
> - */
> - uint32_t ccsidr[16];
> - uint64_t reset_cbar;
> - uint32_t reset_auxcr;
> - bool reset_hivecs;
> - /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
> - uint32_t dcz_blocksize;
> - uint64_t rvbar;
> -} ARMCPU;
> +typedef struct ARMCPU ARMCPU;
>
> #define TYPE_AARCH64_CPU "aarch64-cpu"
> #define AARCH64_CPU_CLASS(klass) \
> @@ -199,40 +63,9 @@ typedef struct AArch64CPUClass {
> /*< public >*/
> } AArch64CPUClass;
>
> -static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
> -{
> - return container_of(env, ARMCPU, env);
> -}
> -
> -#define ENV_GET_CPU(e) CPU(arm_env_get_cpu(e))
> -
> -#define ENV_OFFSET offsetof(ARMCPU, env)
> -
> -#ifndef CONFIG_USER_ONLY
> -extern const struct VMStateDescription vmstate_arm_cpu;
> -#endif
> -
> void register_cp_regs_for_features(ARMCPU *cpu);
> void init_cpreg_list(ARMCPU *cpu);
>
> -void arm_cpu_do_interrupt(CPUState *cpu);
> -void arm_v7m_cpu_do_interrupt(CPUState *cpu);
> -bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req);
> -
> -void arm_cpu_dump_state(CPUState *cs, FILE *f, fprintf_function cpu_fprintf,
> - int flags);
> -
> -hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr,
> - MemTxAttrs *attrs);
> -
> -int arm_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
> -int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
> -
> -int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs,
> - int cpuid, void *opaque);
> -int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs,
> - int cpuid, void *opaque);
> -
> /* Callback functions for the generic timer's timers. */
> void arm_gt_ptimer_cb(void *opaque);
> void arm_gt_vtimer_cb(void *opaque);
> @@ -252,9 +85,4 @@ void arm_gt_stimer_cb(void *opaque);
> #define ARM64_AFFINITY_MASK \
> (ARM_AFF0_MASK|ARM_AFF1_MASK|ARM_AFF2_MASK|ARM_AFF3_MASK)
>
> -#ifdef TARGET_AARCH64
> -int aarch64_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
> -int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
> -#endif
> -
> #endif
> diff --git a/target-arm/cpu.h b/target-arm/cpu.h
> index 066ff67..bf6904c 100644
> --- a/target-arm/cpu.h
> +++ b/target-arm/cpu.h
> @@ -34,6 +34,7 @@
> #define CPUArchState struct CPUARMState
>
> #include "qemu-common.h"
> +#include "cpu-qom.h"
> #include "exec/cpu-defs.h"
>
> #include "fpu/softfloat.h"
> @@ -91,8 +92,6 @@
> #define ARM_CPU_VIRQ 2
> #define ARM_CPU_VFIQ 3
>
> -struct arm_boot_info;
> -
> #define NB_MMU_MODES 7
> #define TARGET_INSN_START_EXTRA_WORDS 1
>
> @@ -504,7 +503,181 @@ typedef struct CPUARMState {
> const struct arm_boot_info *boot_info;
> } CPUARMState;
>
> -#include "cpu-qom.h"
> +/**
> + * ARMCPU:
> + * @env: #CPUARMState
> + *
> + * An ARM CPU core.
> + */
> +struct ARMCPU {
> + /*< private >*/
> + CPUState parent_obj;
> + /*< public >*/
> +
> + CPUARMState env;
> +
> + /* Coprocessor information */
> + GHashTable *cp_regs;
> + /* For marshalling (mostly coprocessor) register state between the
> + * kernel and QEMU (for KVM) and between two QEMUs (for migration),
> + * we use these arrays.
> + */
> + /* List of register indexes managed via these arrays; (full KVM style
> + * 64 bit indexes, not CPRegInfo 32 bit indexes)
> + */
> + uint64_t *cpreg_indexes;
> + /* Values of the registers (cpreg_indexes[i]'s value is cpreg_values[i]) */
> + uint64_t *cpreg_values;
> + /* Length of the indexes, values, reset_values arrays */
> + int32_t cpreg_array_len;
> + /* These are used only for migration: incoming data arrives in
> + * these fields and is sanity checked in post_load before copying
> + * to the working data structures above.
> + */
> + uint64_t *cpreg_vmstate_indexes;
> + uint64_t *cpreg_vmstate_values;
> + int32_t cpreg_vmstate_array_len;
> +
> + /* Timers used by the generic (architected) timer */
> + QEMUTimer *gt_timer[NUM_GTIMERS];
> + /* GPIO outputs for generic timer */
> + qemu_irq gt_timer_outputs[NUM_GTIMERS];
> +
> + /* MemoryRegion to use for secure physical accesses */
> + MemoryRegion *secure_memory;
> +
> + /* 'compatible' string for this CPU for Linux device trees */
> + const char *dtb_compatible;
> +
> + /* PSCI version for this CPU
> + * Bits[31:16] = Major Version
> + * Bits[15:0] = Minor Version
> + */
> + uint32_t psci_version;
> +
> + /* Should CPU start in PSCI powered-off state? */
> + bool start_powered_off;
> + /* CPU currently in PSCI powered-off state */
> + bool powered_off;
> + /* CPU has security extension */
> + bool has_el3;
> +
> + /* CPU has memory protection unit */
> + bool has_mpu;
> + /* PMSAv7 MPU number of supported regions */
> + uint32_t pmsav7_dregion;
> +
> + /* PSCI conduit used to invoke PSCI methods
> + * 0 - disabled, 1 - smc, 2 - hvc
> + */
> + uint32_t psci_conduit;
> +
> + /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or
> + * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type.
> + */
> + uint32_t kvm_target;
> +
> + /* KVM init features for this CPU */
> + uint32_t kvm_init_features[7];
> +
> + /* Uniprocessor system with MP extensions */
> + bool mp_is_up;
> +
> + /* The instance init functions for implementation-specific subclasses
> + * set these fields to specify the implementation-dependent values of
> + * various constant registers and reset values of non-constant
> + * registers.
> + * Some of these might become QOM properties eventually.
> + * Field names match the official register names as defined in the
> + * ARMv7AR ARM Architecture Reference Manual. A reset_ prefix
> + * is used for reset values of non-constant registers; no reset_
> + * prefix means a constant register.
> + */
> + uint32_t midr;
> + uint32_t revidr;
> + uint32_t reset_fpsid;
> + uint32_t mvfr0;
> + uint32_t mvfr1;
> + uint32_t mvfr2;
> + uint32_t ctr;
> + uint32_t reset_sctlr;
> + uint32_t id_pfr0;
> + uint32_t id_pfr1;
> + uint32_t id_dfr0;
> + uint32_t pmceid0;
> + uint32_t pmceid1;
> + uint32_t id_afr0;
> + uint32_t id_mmfr0;
> + uint32_t id_mmfr1;
> + uint32_t id_mmfr2;
> + uint32_t id_mmfr3;
> + uint32_t id_mmfr4;
> + uint32_t id_isar0;
> + uint32_t id_isar1;
> + uint32_t id_isar2;
> + uint32_t id_isar3;
> + uint32_t id_isar4;
> + uint32_t id_isar5;
> + uint64_t id_aa64pfr0;
> + uint64_t id_aa64pfr1;
> + uint64_t id_aa64dfr0;
> + uint64_t id_aa64dfr1;
> + uint64_t id_aa64afr0;
> + uint64_t id_aa64afr1;
> + uint64_t id_aa64isar0;
> + uint64_t id_aa64isar1;
> + uint64_t id_aa64mmfr0;
> + uint64_t id_aa64mmfr1;
> + uint32_t dbgdidr;
> + uint32_t clidr;
> + uint64_t mp_affinity; /* MP ID without feature bits */
> + /* The elements of this array are the CCSIDR values for each cache,
> + * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
> + */
> + uint32_t ccsidr[16];
> + uint64_t reset_cbar;
> + uint32_t reset_auxcr;
> + bool reset_hivecs;
> + /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
> + uint32_t dcz_blocksize;
> + uint64_t rvbar;
> +};
> +
> +static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
> +{
> + return container_of(env, ARMCPU, env);
> +}
> +
> +#define ENV_GET_CPU(e) CPU(arm_env_get_cpu(e))
> +
> +#define ENV_OFFSET offsetof(ARMCPU, env)
> +
> +#ifndef CONFIG_USER_ONLY
> +extern const struct VMStateDescription vmstate_arm_cpu;
> +#endif
> +
> +void arm_cpu_do_interrupt(CPUState *cpu);
> +void arm_v7m_cpu_do_interrupt(CPUState *cpu);
> +bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req);
> +
> +void arm_cpu_dump_state(CPUState *cs, FILE *f, fprintf_function cpu_fprintf,
> + int flags);
> +
> +hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr,
> + MemTxAttrs *attrs);
> +
> +int arm_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
> +int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
> +
> +int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs,
> + int cpuid, void *opaque);
> +int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs,
> + int cpuid, void *opaque);
> +
> +#ifdef TARGET_AARCH64
> +int aarch64_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
> +int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
> +#endif
>
> ARMCPU *cpu_arm_init(const char *cpu_model);
> int cpu_arm_exec(CPUState *cpu);
--
Alex Bennée
next prev parent reply other threads:[~2016-04-21 10:29 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-08 20:28 [Qemu-devel] [PATCH for-2.7 00/49] NEED_CPU_H / cpu.h / hw/hw.h cleanups Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 01/50] scripts: add script to build QEMU and analyze inclusions Paolo Bonzini
2016-04-18 13:10 ` Markus Armbruster
2016-05-09 10:07 ` Paolo Bonzini
2016-04-20 19:47 ` Alex Bennée
2016-05-09 9:39 ` Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 02/50] include: move CPU-related definitions out of qemu-common.h Paolo Bonzini
2016-04-21 7:53 ` Alex Bennée
2016-04-08 20:28 ` [Qemu-devel] [PATCH 03/50] log: do not use CONFIG_USER_ONLY Paolo Bonzini
2016-04-21 10:20 ` Alex Bennée
2016-04-08 20:28 ` [Qemu-devel] [PATCH 04/50] cpu: make cpu-qom.h only include-able from cpu.h Paolo Bonzini
2016-04-21 10:26 ` Alex Bennée
2016-04-08 20:28 ` [Qemu-devel] [PATCH 05/50] target-alpha: make cpu-qom.h not target specific Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 06/50] target-arm: " Paolo Bonzini
2016-04-21 10:29 ` Alex Bennée [this message]
2016-04-08 20:28 ` [Qemu-devel] [PATCH 07/50] target-cris: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 08/50] target-i386: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 09/50] target-lm32: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 10/50] target-m68k: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 11/50] target-microblaze: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 12/50] target-mips: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 13/50] target-ppc: do not use target_ulong in cpu-qom.h Paolo Bonzini
2016-04-18 13:46 ` Markus Armbruster
2016-04-08 20:28 ` [Qemu-devel] [PATCH 14/50] target-ppc: make cpu-qom.h not target specific Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 15/50] target-s390x: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 16/50] target-sh4: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 17/50] target-sparc: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 18/50] target-tricore: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 19/50] target-unicore32: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 20/50] target-xtensa: " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 21/50] arm: include cpu-qom.h in files that require ARMCPU Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 22/50] m68k: include cpu-qom.h in files that require M68KCPU Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 23/50] sh4: include cpu-qom.h in files that require SuperHCPU Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 24/50] alpha: include cpu-qom.h in files that require AlphaCPU Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 25/50] mips: use MIPSCPU instead of CPUMIPSState Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 26/50] ppc: use PowerPCCPU instead of CPUPPCState Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 27/50] arm: remove useless cpu.h inclusion Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 28/50] explicitly include qom/cpu.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 29/50] explicitly include hw/qdev-core.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 30/50] explicitly include linux/kvm.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 31/50] apic: move target-dependent definitions to cpu.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 32/50] include: poison symbols in osdep.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 33/50] hw: do not use VMSTATE_*TL Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 34/50] hw: move CPU state serialization to migration/cpu.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 35/50] hw: cannot include hw/hw.h from user emulation Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 36/50] cpu: move endian-dependent load/store functions to cpu-all.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 37/50] qemu-common: stop including qemu/bswap.h from qemu-common.h Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 38/50] qemu-common: stop including qemu/host-utils.h " Paolo Bonzini
2016-04-21 10:46 ` Alex Bennée
2016-05-09 9:39 ` Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 39/50] gdbstub: remove includes from gdbstub-xml.c Paolo Bonzini
2016-04-18 13:54 ` Markus Armbruster
2016-04-18 14:12 ` Peter Maydell
2016-04-08 20:29 ` [Qemu-devel] [PATCH 40/50] dma: do not depend on kvm_enabled() Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 41/50] s390x: move stuff out of cpu.h Paolo Bonzini
2016-04-11 8:24 ` Cornelia Huck
2016-05-09 9:43 ` Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 42/50] acpi: do not use TARGET_PAGE_SIZE Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 43/50] qemu-common: push cpu.h inclusion out of qemu-common.h Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 44/50] arm: move arm_log_exception into .c file Paolo Bonzini
2016-04-21 10:48 ` Alex Bennée
2016-04-08 20:29 ` [Qemu-devel] [PATCH 45/50] mips: move CP0 functions out of cpu.h Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 46/50] hw: explicitly include qemu/log.h Paolo Bonzini
2016-04-20 18:30 ` Alex Bennée
2016-04-08 20:29 ` [Qemu-devel] [PATCH 47/50] exec: extract exec/tb-context.h Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 48/50] cpu: move exec-all.h inclusion out of cpu.h Paolo Bonzini
2016-04-08 20:29 ` [Qemu-devel] [PATCH 49/50] hw: remove pio_addr_t Paolo Bonzini
2016-04-18 14:01 ` Markus Armbruster
2016-04-08 20:29 ` [Qemu-devel] [PATCH 50/50] hw: clean up hw/hw.h includes Paolo Bonzini
2016-04-18 8:42 ` [Qemu-devel] [PATCH for-2.7 00/49] NEED_CPU_H / cpu.h / hw/hw.h cleanups Markus Armbruster
2016-04-18 14:07 ` Markus Armbruster
-- strict thread matches above, loose matches on Subject: below --
2016-05-16 15:35 [Qemu-devel] [PATCH CFT v3 00/50] " Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 06/50] target-arm: make cpu-qom.h not target specific Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8737qfuuf3.fsf@linaro.org \
--to=alex.bennee@linaro.org \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).