qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Juan Quintela <quintela@redhat.com>
To: "tejus.gk" <tejus.gk@nutanix.com>
Cc: qemu-devel@nongnu.org,  peterx@redhat.com,  leobras@redhat.com,
	berrange@redhat.com,  shivam.kumar1@nutanix.com
Subject: Re: [RFC v2 1/1] migration: Update error description whenever migration fails
Date: Tue, 09 May 2023 12:16:02 +0200	[thread overview]
Message-ID: <874jolg68t.fsf@secure.mitica> (raw)
In-Reply-To: <20230508153223.133081-2-tejus.gk@nutanix.com> (tejus gk's message of "Mon, 8 May 2023 15:32:23 +0000")

"tejus.gk" <tejus.gk@nutanix.com> wrote:
> There are places in the code where the migration is marked failed with
> MIGRATION_STATUS_FAILED, but the failiure reason is never updated. Hence
> libvirt doesn't know why the migration failed when it queries for it.
>
> Signed-off-by: tejus.gk <tejus.gk@nutanix.com>
> ---
>  migration/migration.c | 24 +++++++++++-------------
>  1 file changed, 11 insertions(+), 13 deletions(-)
>
> diff --git a/migration/migration.c b/migration/migration.c
> index 232e387109..87101eed5c 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -1660,15 +1660,9 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,
>      } else if (strstart(uri, "fd:", &p)) {
>          fd_start_outgoing_migration(s, p, &local_err);
>      } else {
> -        if (!(has_resume && resume)) {
> -            yank_unregister_instance(MIGRATION_YANK_INSTANCE);
> -        }

Why are you removing this yank_unregister()?

> -        error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "uri",
> +        error_setg(&local_err, QERR_INVALID_PARAMETER_VALUE, "uri",
>                     "a valid migration protocol");
> -        migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
> -                          MIGRATION_STATUS_FAILED);
>          block_cleanup_parameters();
> -        return;
>      }
>  
>      if (local_err) {
> @@ -2050,7 +2044,7 @@ migration_wait_main_channel(MigrationState *ms)
>   * Switch from normal iteration to postcopy
>   * Returns non-0 on error
>   */
> -static int postcopy_start(MigrationState *ms)
> +static int postcopy_start(MigrationState *ms, Error **errp)
>  {
>      int ret;
>      QIOChannelBuffer *bioc;
> @@ -2165,7 +2159,7 @@ static int postcopy_start(MigrationState *ms)
>       */
>      ret = qemu_file_get_error(ms->to_dst_file);
>      if (ret) {
> -        error_report("postcopy_start: Migration stream errored (pre package)");
> +        error_setg(errp, "postcopy_start: Migration stream errored (pre package)");
>          goto fail_closefb;
>      }
>  
> @@ -2202,7 +2196,7 @@ static int postcopy_start(MigrationState *ms)
>  
>      ret = qemu_file_get_error(ms->to_dst_file);
>      if (ret) {
> -        error_report("postcopy_start: Migration stream errored");
> +        error_setg(errp, "postcopy_start: Migration stream errored");
>          migrate_set_state(&ms->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
>                                MIGRATION_STATUS_FAILED);
>      }
> @@ -2719,6 +2713,7 @@ typedef enum {
>  static MigIterateState migration_iteration_run(MigrationState *s)
>  {
>      uint64_t must_precopy, can_postcopy;
> +    Error *local_err = NULL;
>      bool in_postcopy = s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE;
>  
>      qemu_savevm_state_pending_estimate(&must_precopy, &can_postcopy);
> @@ -2741,8 +2736,9 @@ static MigIterateState migration_iteration_run(MigrationState *s)
>      /* Still a significant amount to transfer */
>      if (!in_postcopy && must_precopy <= s->threshold_size &&
>          qatomic_read(&s->start_postcopy)) {
> -        if (postcopy_start(s)) {
> -            error_report("%s: postcopy failed to start", __func__);
> +        if (postcopy_start(s, &local_err)) {
> +            migrate_set_error(s, local_err);
> +            error_report_err(local_err);
>          }
>          return MIG_ITERATE_SKIP;
>      }
> @@ -3232,8 +3228,10 @@ void migrate_fd_connect(MigrationState *s, Error *error_in)
>       */
>      if (migrate_postcopy_ram() || migrate_return_path()) {
>          if (open_return_path_on_source(s, !resume)) {
> -            error_report("Unable to open return-path for postcopy");
> +            error_setg(&local_err, "Unable to open return-path for postcopy");
>              migrate_set_state(&s->state, s->state, MIGRATION_STATUS_FAILED);
> +            migrate_set_error(s, local_err);
> +            error_report_err(local_err);
>              migrate_fd_cleanup(s);
>              return;
>          }

The rest of the patch looks right to me.

Later, Juan.



  parent reply	other threads:[~2023-05-09 10:16 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-08 15:32 [RFC v2 0/1] migration: Update error description whenever migration fails tejus.gk
2023-05-08 15:32 ` [RFC v2 1/1] " tejus.gk
2023-05-08 16:49   ` Thomas Huth
2023-05-09 12:02     ` Tejus GK
2023-05-09 10:16   ` Juan Quintela [this message]
2023-05-09 12:32     ` Tejus GK

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=874jolg68t.fsf@secure.mitica \
    --to=quintela@redhat.com \
    --cc=berrange@redhat.com \
    --cc=leobras@redhat.com \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=shivam.kumar1@nutanix.com \
    --cc=tejus.gk@nutanix.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).