* [PULL 01/41] crypto/linux_keyring: fix 'secret_keyring' configure test
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 02/41] util/coroutine: Cleanup start_switch_fiber_ for TSAN Alex Bennée
` (41 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell; +Cc: David Edmondson, Thomas Huth, Alex Bennée, qemu-devel
From: David Edmondson <david.edmondson@oracle.com>
The configure test for 'secret_keyring' incorrectly checked the
'have_keyring' variable.
Fixes: 54e7aac0562452e4fcab65ca5001d030eef2de15
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200618092636.71832-1-david.edmondson@oracle.com>
Message-Id: <20200701135652.1366-4-alex.bennee@linaro.org>
diff --git a/configure b/configure
index 8a65240d4a8a..83e36c270cce 100755
--- a/configure
+++ b/configure
@@ -6461,7 +6461,7 @@ EOF
fi
if test "$secret_keyring" != "no"
then
- if test "$have_keyring" == "yes"
+ if test "$have_keyring" = "yes"
then
secret_keyring=yes
else
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 02/41] util/coroutine: Cleanup start_switch_fiber_ for TSAN.
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
2020-07-07 7:08 ` [PULL 01/41] crypto/linux_keyring: fix 'secret_keyring' configure test Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 03/41] tests/vm: pass args through to BaseVM's __init__ Alex Bennée
` (40 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Kevin Wolf, Alex Bennée, qemu-devel, Stefan Hajnoczi,
Robert Foley
From: Robert Foley <robert.foley@linaro.org>
This is a cleanup patch to follow-up the patch which introduced TSAN.
This patch makes separate start_switch_fiber_ functions for TSAN and ASAN.
This does two things:
1. Unrelated ASAN and TSAN code is separate and each function only
has arguments that are actually needed.
2. The co->tsan_caller_fiber and co->tsan_co_fiber fields are only
access from within #ifdef CONFIG_TSAN.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626170001.27017-1-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-5-alex.bennee@linaro.org>
diff --git a/util/coroutine-ucontext.c b/util/coroutine-ucontext.c
index f0b66320e102..fff20aad80a4 100644
--- a/util/coroutine-ucontext.c
+++ b/util/coroutine-ucontext.c
@@ -52,8 +52,10 @@ typedef struct {
#endif
sigjmp_buf env;
+#ifdef CONFIG_TSAN
void *tsan_co_fiber;
void *tsan_caller_fiber;
+#endif
#ifdef CONFIG_VALGRIND_H
unsigned int valgrind_stack_id;
@@ -77,7 +79,10 @@ union cc_arg {
int i[2];
};
-/* QEMU_ALWAYS_INLINE only does so if __OPTIMIZE__, so we cannot use it. */
+/*
+ * QEMU_ALWAYS_INLINE only does so if __OPTIMIZE__, so we cannot use it.
+ * always_inline is required to avoid TSan runtime fatal errors.
+ */
static inline __attribute__((always_inline))
void on_new_fiber(CoroutineUContext *co)
{
@@ -87,6 +92,7 @@ void on_new_fiber(CoroutineUContext *co)
#endif
}
+/* always_inline is required to avoid TSan runtime fatal errors. */
static inline __attribute__((always_inline))
void finish_switch_fiber(void *fake_stack_save)
{
@@ -109,18 +115,29 @@ void finish_switch_fiber(void *fake_stack_save)
#endif
}
-static inline __attribute__((always_inline)) void start_switch_fiber(
- CoroutineAction action, void **fake_stack_save,
- const void *bottom, size_t size, void *new_fiber)
+/* always_inline is required to avoid TSan runtime fatal errors. */
+static inline __attribute__((always_inline))
+void start_switch_fiber_asan(CoroutineAction action, void **fake_stack_save,
+ const void *bottom, size_t size)
{
#ifdef CONFIG_ASAN
__sanitizer_start_switch_fiber(
action == COROUTINE_TERMINATE ? NULL : fake_stack_save,
bottom, size);
#endif
+}
+
+/* always_inline is required to avoid TSan runtime fatal errors. */
+static inline __attribute__((always_inline))
+void start_switch_fiber_tsan(void **fake_stack_save,
+ CoroutineUContext *co,
+ bool caller)
+{
#ifdef CONFIG_TSAN
- void *curr_fiber =
- __tsan_get_current_fiber();
+ void *new_fiber = caller ?
+ co->tsan_caller_fiber :
+ co->tsan_co_fiber;
+ void *curr_fiber = __tsan_get_current_fiber();
__tsan_acquire(curr_fiber);
*fake_stack_save = curr_fiber;
@@ -144,12 +161,9 @@ static void coroutine_trampoline(int i0, int i1)
/* Initialize longjmp environment and switch back the caller */
if (!sigsetjmp(self->env, 0)) {
- start_switch_fiber(
- COROUTINE_YIELD,
- &fake_stack_save,
- leader.stack,
- leader.stack_size,
- self->tsan_caller_fiber);
+ start_switch_fiber_asan(COROUTINE_YIELD, &fake_stack_save, leader.stack,
+ leader.stack_size);
+ start_switch_fiber_tsan(&fake_stack_save, self, true); /* true=caller */
siglongjmp(*(sigjmp_buf *)co->entry_arg, 1);
}
@@ -208,10 +222,10 @@ Coroutine *qemu_coroutine_new(void)
/* swapcontext() in, siglongjmp() back out */
if (!sigsetjmp(old_env, 0)) {
- start_switch_fiber(
- COROUTINE_YIELD,
- &fake_stack_save,
- co->stack, co->stack_size, co->tsan_co_fiber);
+ start_switch_fiber_asan(COROUTINE_YIELD, &fake_stack_save, co->stack,
+ co->stack_size);
+ start_switch_fiber_tsan(&fake_stack_save,
+ co, false); /* false=not caller */
#ifdef CONFIG_SAFESTACK
/*
@@ -287,8 +301,10 @@ qemu_coroutine_switch(Coroutine *from_, Coroutine *to_,
ret = sigsetjmp(from->env, 0);
if (ret == 0) {
- start_switch_fiber(action, &fake_stack_save,
- to->stack, to->stack_size, to->tsan_co_fiber);
+ start_switch_fiber_asan(action, &fake_stack_save, to->stack,
+ to->stack_size);
+ start_switch_fiber_tsan(&fake_stack_save,
+ to, false); /* false=not caller */
siglongjmp(to->env, action);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 03/41] tests/vm: pass args through to BaseVM's __init__
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
2020-07-07 7:08 ` [PULL 01/41] crypto/linux_keyring: fix 'secret_keyring' configure test Alex Bennée
2020-07-07 7:08 ` [PULL 02/41] util/coroutine: Cleanup start_switch_fiber_ for TSAN Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 04/41] tests/vm: Add configuration to basevm.py Alex Bennée
` (39 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Philippe Mathieu-Daudé, Alex Bennée,
qemu-devel, Robert Foley
From: Robert Foley <robert.foley@linaro.org>
Adding the args parameter to BaseVM's __init__.
We will shortly need to pass more parameters to the class
so let's just pass args rather than growing the parameter list.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-2-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-6-alex.bennee@linaro.org>
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index a80b616a08d3..5a58e6c39300 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -61,11 +61,10 @@ class BaseVM(object):
# 4 is arbitrary, but greater than 2,
# since we found we need to wait more than twice as long.
tcg_ssh_timeout_multiplier = 4
- def __init__(self, debug=False, vcpus=None, genisoimage=None,
- build_path=None):
+ def __init__(self, args):
self._guest = None
- self._genisoimage = genisoimage
- self._build_path = build_path
+ self._genisoimage = args.genisoimage
+ self._build_path = args.build_path
self._tmpdir = os.path.realpath(tempfile.mkdtemp(prefix="vm-test-",
suffix=".tmp",
dir="."))
@@ -78,7 +77,7 @@ class BaseVM(object):
self._ssh_pub_key_file = os.path.join(self._tmpdir, "id_rsa.pub")
open(self._ssh_pub_key_file, "w").write(SSH_PUB_KEY)
- self.debug = debug
+ self.debug = args.debug
self._stderr = sys.stderr
self._devnull = open(os.devnull, "w")
if self.debug:
@@ -92,8 +91,8 @@ class BaseVM(object):
(",ipv6=no" if not self.ipv6 else ""),
"-device", "virtio-net-pci,netdev=vnet",
"-vnc", "127.0.0.1:0,to=20"]
- if vcpus and vcpus > 1:
- self._args += ["-smp", "%d" % vcpus]
+ if args.jobs and args.jobs > 1:
+ self._args += ["-smp", "%d" % args.jobs]
if kvm_available(self.arch):
self._args += ["-enable-kvm"]
else:
@@ -456,8 +455,7 @@ def main(vmcls):
return 1
logging.basicConfig(level=(logging.DEBUG if args.debug
else logging.WARN))
- vm = vmcls(debug=args.debug, vcpus=args.jobs,
- genisoimage=args.genisoimage, build_path=args.build_path)
+ vm = vmcls(args)
if args.build_image:
if os.path.exists(args.image) and not args.force:
sys.stderr.writelines(["Image file exists: %s\n" % args.image,
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 04/41] tests/vm: Add configuration to basevm.py
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (2 preceding siblings ...)
2020-07-07 7:08 ` [PULL 03/41] tests/vm: pass args through to BaseVM's __init__ Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-10 13:50 ` Alex Bennée
2020-07-07 7:08 ` [PULL 05/41] tests/vm: Added configuration file support Alex Bennée
` (38 subsequent siblings)
42 siblings, 1 reply; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Robert Foley, Alex Bennée, qemu-devel,
Peter Puhov, Philippe Mathieu-Daudé
From: Robert Foley <robert.foley@linaro.org>
Added use of a configuration to tests/vm/basevm.py.
The configuration provides parameters used to configure a VM.
This allows for providing alternate configurations to the VM being
created/launched. cpu, machine, memory, and NUMA configuration are all
examples of configuration which we might want to vary on the VM being created
or launched.
This will for example allow for creating an aarch64 vm.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-3-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-7-alex.bennee@linaro.org>
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index 5a58e6c39300..cfe20c58f7ef 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -29,16 +29,41 @@ import tempfile
import shutil
import multiprocessing
import traceback
-
-SSH_KEY = open(os.path.join(os.path.dirname(__file__),
- "..", "keys", "id_rsa")).read()
-SSH_PUB_KEY = open(os.path.join(os.path.dirname(__file__),
- "..", "keys", "id_rsa.pub")).read()
-
+import shlex
+
+SSH_KEY_FILE = os.path.join(os.path.dirname(__file__),
+ "..", "keys", "id_rsa")
+SSH_PUB_KEY_FILE = os.path.join(os.path.dirname(__file__),
+ "..", "keys", "id_rsa.pub")
+
+# This is the standard configuration.
+# Any or all of these can be overridden by
+# passing in a config argument to the VM constructor.
+DEFAULT_CONFIG = {
+ 'cpu' : "max",
+ 'machine' : 'pc',
+ 'guest_user' : "qemu",
+ 'guest_pass' : "qemupass",
+ 'root_pass' : "qemupass",
+ 'ssh_key_file' : SSH_KEY_FILE,
+ 'ssh_pub_key_file': SSH_PUB_KEY_FILE,
+ 'memory' : "4G",
+ 'extra_args' : [],
+ 'qemu_args' : "",
+ 'dns' : "",
+ 'ssh_port' : 0,
+ 'install_cmds' : "",
+ 'boot_dev_type' : "block",
+ 'ssh_timeout' : 1,
+}
+BOOT_DEVICE = {
+ 'block' : "-drive file={},if=none,id=drive0,cache=writeback "\
+ "-device virtio-blk,drive=drive0,bootindex=0",
+ 'scsi' : "-device virtio-scsi-device,id=scsi "\
+ "-drive file={},format=raw,if=none,id=hd0 "\
+ "-device scsi-hd,drive=hd0,bootindex=0",
+}
class BaseVM(object):
- GUEST_USER = "qemu"
- GUEST_PASS = "qemupass"
- ROOT_PASS = "qemupass"
envvars = [
"https_proxy",
@@ -57,25 +82,38 @@ class BaseVM(object):
poweroff = "poweroff"
# enable IPv6 networking
ipv6 = True
+ # This is the timeout on the wait for console bytes.
+ socket_timeout = 120
# Scale up some timeouts under TCG.
# 4 is arbitrary, but greater than 2,
# since we found we need to wait more than twice as long.
tcg_ssh_timeout_multiplier = 4
- def __init__(self, args):
+ def __init__(self, args, config=None):
self._guest = None
self._genisoimage = args.genisoimage
self._build_path = args.build_path
+ # Allow input config to override defaults.
+ self._config = DEFAULT_CONFIG.copy()
+ if config != None:
+ self._config.update(config)
+ self.validate_ssh_keys()
self._tmpdir = os.path.realpath(tempfile.mkdtemp(prefix="vm-test-",
suffix=".tmp",
dir="."))
atexit.register(shutil.rmtree, self._tmpdir)
-
- self._ssh_key_file = os.path.join(self._tmpdir, "id_rsa")
- open(self._ssh_key_file, "w").write(SSH_KEY)
- subprocess.check_call(["chmod", "600", self._ssh_key_file])
-
- self._ssh_pub_key_file = os.path.join(self._tmpdir, "id_rsa.pub")
- open(self._ssh_pub_key_file, "w").write(SSH_PUB_KEY)
+ # Copy the key files to a temporary directory.
+ # Also chmod the key file to agree with ssh requirements.
+ self._config['ssh_key'] = \
+ open(self._config['ssh_key_file']).read().rstrip()
+ self._config['ssh_pub_key'] = \
+ open(self._config['ssh_pub_key_file']).read().rstrip()
+ self._ssh_tmp_key_file = os.path.join(self._tmpdir, "id_rsa")
+ open(self._ssh_tmp_key_file, "w").write(self._config['ssh_key'])
+ subprocess.check_call(["chmod", "600", self._ssh_tmp_key_file])
+
+ self._ssh_tmp_pub_key_file = os.path.join(self._tmpdir, "id_rsa.pub")
+ open(self._ssh_tmp_pub_key_file,
+ "w").write(self._config['ssh_pub_key'])
self.debug = args.debug
self._stderr = sys.stderr
@@ -84,11 +122,14 @@ class BaseVM(object):
self._stdout = sys.stdout
else:
self._stdout = self._devnull
+ netdev = "user,id=vnet,hostfwd=:127.0.0.1:{}-:22"
self._args = [ \
- "-nodefaults", "-m", "4G",
- "-cpu", "max",
- "-netdev", "user,id=vnet,hostfwd=:127.0.0.1:0-:22" +
- (",ipv6=no" if not self.ipv6 else ""),
+ "-nodefaults", "-m", self._config['memory'],
+ "-cpu", self._config['cpu'],
+ "-netdev",
+ netdev.format(self._config['ssh_port']) +
+ (",ipv6=no" if not self.ipv6 else "") +
+ (",dns=" + self._config['dns'] if self._config['dns'] else ""),
"-device", "virtio-net-pci,netdev=vnet",
"-vnc", "127.0.0.1:0,to=20"]
if args.jobs and args.jobs > 1:
@@ -99,6 +140,55 @@ class BaseVM(object):
logging.info("KVM not available, not using -enable-kvm")
self._data_args = []
+ if self._config['qemu_args'] != None:
+ qemu_args = self._config['qemu_args']
+ qemu_args = qemu_args.replace('\n',' ').replace('\r','')
+ # shlex groups quoted arguments together
+ # we need this to keep the quoted args together for when
+ # the QEMU command is issued later.
+ args = shlex.split(qemu_args)
+ self._config['extra_args'] = []
+ for arg in args:
+ if arg:
+ # Preserve quotes around arguments.
+ # shlex above takes them out, so add them in.
+ if " " in arg:
+ arg = '"{}"'.format(arg)
+ self._config['extra_args'].append(arg)
+
+ def validate_ssh_keys(self):
+ """Check to see if the ssh key files exist."""
+ if 'ssh_key_file' not in self._config or\
+ not os.path.exists(self._config['ssh_key_file']):
+ raise Exception("ssh key file not found.")
+ if 'ssh_pub_key_file' not in self._config or\
+ not os.path.exists(self._config['ssh_pub_key_file']):
+ raise Exception("ssh pub key file not found.")
+
+ def wait_boot(self, wait_string=None):
+ """Wait for the standard string we expect
+ on completion of a normal boot.
+ The user can also choose to override with an
+ alternate string to wait for."""
+ if wait_string is None:
+ if self.login_prompt is None:
+ raise Exception("self.login_prompt not defined")
+ wait_string = self.login_prompt
+ # Intentionally bump up the default timeout under TCG,
+ # since the console wait below takes longer.
+ timeout = self.socket_timeout
+ if not kvm_available(self.arch):
+ timeout *= 8
+ self.console_init(timeout=timeout)
+ self.console_wait(wait_string)
+
+ def __getattr__(self, name):
+ # Support direct access to config by key.
+ # for example, access self._config['cpu'] by self.cpu
+ if name.lower() in self._config.keys():
+ return self._config[name.lower()]
+ return object.__getattribute__(self, name)
+
def _download_with_cache(self, url, sha256sum=None, sha512sum=None):
def check_sha256sum(fname):
if not sha256sum:
@@ -130,8 +220,9 @@ class BaseVM(object):
"-t",
"-o", "StrictHostKeyChecking=no",
"-o", "UserKnownHostsFile=" + os.devnull,
- "-o", "ConnectTimeout=1",
- "-p", self.ssh_port, "-i", self._ssh_key_file]
+ "-o",
+ "ConnectTimeout={}".format(self._config["ssh_timeout"]),
+ "-p", self.ssh_port, "-i", self._ssh_tmp_key_file]
# If not in debug mode, set ssh to quiet mode to
# avoid printing the results of commands.
if not self.debug:
@@ -180,14 +271,14 @@ class BaseVM(object):
"virtio-blk,drive=%s,serial=%s,bootindex=1" % (name, name)]
def boot(self, img, extra_args=[]):
- args = self._args + [
- "-drive", "file=%s,if=none,id=drive0,cache=writeback" % img,
- "-device", "virtio-blk,drive=drive0,bootindex=0"]
- args += self._data_args + extra_args
+ boot_dev = BOOT_DEVICE[self._config['boot_dev_type']]
+ boot_params = boot_dev.format(img)
+ args = self._args + boot_params.split(' ')
+ args += self._data_args + extra_args + self._config['extra_args']
logging.debug("QEMU args: %s", " ".join(args))
qemu_path = get_qemu_path(self.arch, self._build_path)
guest = QEMUMachine(binary=qemu_path, args=args)
- guest.set_machine('pc')
+ guest.set_machine(self._config['machine'])
guest.set_console()
try:
guest.launch()
@@ -301,7 +392,8 @@ class BaseVM(object):
self.console_send(command)
def console_ssh_init(self, prompt, user, pw):
- sshkey_cmd = "echo '%s' > .ssh/authorized_keys\n" % SSH_PUB_KEY.rstrip()
+ sshkey_cmd = "echo '%s' > .ssh/authorized_keys\n" \
+ % self._config['ssh_pub_key'].rstrip()
self.console_wait_send("login:", "%s\n" % user)
self.console_wait_send("Password:", "%s\n" % pw)
self.console_wait_send(prompt, "mkdir .ssh\n")
@@ -360,23 +452,23 @@ class BaseVM(object):
"local-hostname: {}-guest\n".format(name)])
mdata.close()
udata = open(os.path.join(cidir, "user-data"), "w")
- print("guest user:pw {}:{}".format(self.GUEST_USER,
- self.GUEST_PASS))
+ print("guest user:pw {}:{}".format(self._config['guest_user'],
+ self._config['guest_pass']))
udata.writelines(["#cloud-config\n",
"chpasswd:\n",
" list: |\n",
- " root:%s\n" % self.ROOT_PASS,
- " %s:%s\n" % (self.GUEST_USER,
- self.GUEST_PASS),
+ " root:%s\n" % self._config['root_pass'],
+ " %s:%s\n" % (self._config['guest_user'],
+ self._config['guest_pass']),
" expire: False\n",
"users:\n",
- " - name: %s\n" % self.GUEST_USER,
+ " - name: %s\n" % self._config['guest_user'],
" sudo: ALL=(ALL) NOPASSWD:ALL\n",
" ssh-authorized-keys:\n",
- " - %s\n" % SSH_PUB_KEY,
+ " - %s\n" % self._config['ssh_pub_key'],
" - name: root\n",
" ssh-authorized-keys:\n",
- " - %s\n" % SSH_PUB_KEY,
+ " - %s\n" % self._config['ssh_pub_key'],
"locale: en_US.UTF-8\n"])
proxy = os.environ.get("http_proxy")
if not proxy is None:
@@ -447,15 +539,17 @@ def parse_args(vmcls):
parser.disable_interspersed_args()
return parser.parse_args()
-def main(vmcls):
+def main(vmcls, config=None):
try:
+ if config == None:
+ config = {}
args, argv = parse_args(vmcls)
if not argv and not args.build_qemu and not args.build_image:
print("Nothing to do?")
return 1
logging.basicConfig(level=(logging.DEBUG if args.debug
else logging.WARN))
- vm = vmcls(args)
+ vm = vmcls(args, config=config)
if args.build_image:
if os.path.exists(args.image) and not args.force:
sys.stderr.writelines(["Image file exists: %s\n" % args.image,
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* Re: [PULL 04/41] tests/vm: Add configuration to basevm.py
2020-07-07 7:08 ` [PULL 04/41] tests/vm: Add configuration to basevm.py Alex Bennée
@ 2020-07-10 13:50 ` Alex Bennée
0 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-10 13:50 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Robert Foley, Alex Bennée, qemu-devel,
Peter Puhov, Philippe Mathieu-Daudé
Alex Bennée <alex.bennee@linaro.org> writes:
> From: Robert Foley <robert.foley@linaro.org>
>
> Added use of a configuration to tests/vm/basevm.py.
> The configuration provides parameters used to configure a VM.
> This allows for providing alternate configurations to the VM being
> created/launched. cpu, machine, memory, and NUMA configuration are all
> examples of configuration which we might want to vary on the VM being created
> or launched.
> This will for example allow for creating an aarch64 vm.
>
> Signed-off-by: Robert Foley <robert.foley@linaro.org>
> Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Message-Id: <20200601211421.1277-3-robert.foley@linaro.org>
> Message-Id: <20200701135652.1366-7-alex.bennee@linaro.org>
>
> diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
> index 5a58e6c39300..cfe20c58f7ef 100644
> --- a/tests/vm/basevm.py
> +++ b/tests/vm/basevm.py
> @@ -29,16 +29,41 @@ import tempfile
> import shutil
> import multiprocessing
> import traceback
> -
> -SSH_KEY = open(os.path.join(os.path.dirname(__file__),
> - "..", "keys", "id_rsa")).read()
> -SSH_PUB_KEY = open(os.path.join(os.path.dirname(__file__),
> - "..", "keys", "id_rsa.pub")).read()
> -
> +import shlex
> +
> +SSH_KEY_FILE = os.path.join(os.path.dirname(__file__),
> + "..", "keys", "id_rsa")
> +SSH_PUB_KEY_FILE = os.path.join(os.path.dirname(__file__),
> + "..", "keys", "id_rsa.pub")
> +
> +# This is the standard configuration.
> +# Any or all of these can be overridden by
> +# passing in a config argument to the VM constructor.
> +DEFAULT_CONFIG = {
> + 'cpu' : "max",
> + 'machine' : 'pc',
> + 'guest_user' : "qemu",
> + 'guest_pass' : "qemupass",
> + 'root_pass' : "qemupass",
> + 'ssh_key_file' : SSH_KEY_FILE,
> + 'ssh_pub_key_file': SSH_PUB_KEY_FILE,
> + 'memory' : "4G",
> + 'extra_args' : [],
> + 'qemu_args' : "",
> + 'dns' : "",
> + 'ssh_port' : 0,
> + 'install_cmds' : "",
> + 'boot_dev_type' : "block",
> + 'ssh_timeout' : 1,
> +}
<snip>
>
> -def main(vmcls):
> +def main(vmcls, config=None):
> try:
> + if config == None:
> + config = {}
Ahh I think this is where is went wrong - should be config = DEFAULT_CONFIG
Just re-running the rest of the vm builds now.
--
Alex Bennée
^ permalink raw reply [flat|nested] 56+ messages in thread
* [PULL 05/41] tests/vm: Added configuration file support
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (3 preceding siblings ...)
2020-07-07 7:08 ` [PULL 04/41] tests/vm: Add configuration to basevm.py Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 06/41] tests/vm: Add common Ubuntu python module Alex Bennée
` (37 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Robert Foley, Alex Bennée, qemu-devel,
Peter Puhov, Philippe Mathieu-Daudé
From: Robert Foley <robert.foley@linaro.org>
Changes to tests/vm/basevm.py to allow accepting a configuration file
as a parameter. Allows for specifying VM options such as
cpu, machine, memory, and arbitrary qemu arguments for specifying options
such as NUMA configuration.
Also added an example conf_example_aarch64.yml and conf_example_x86.yml.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-4-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-8-alex.bennee@linaro.org>
diff --git a/configure b/configure
index 83e36c270cce..3cabd004e329 100755
--- a/configure
+++ b/configure
@@ -960,6 +960,13 @@ do
fi
done
+# Check for existence of python3 yaml, needed to
+# import yaml config files into vm-build.
+python_yaml="no"
+if $(python3 -c "import yaml" 2> /dev/null); then
+ python_yaml="yes"
+fi
+
: ${smbd=${SMBD-/usr/sbin/smbd}}
# Default objcc to clang if available, otherwise use CC
@@ -6843,6 +6850,7 @@ if test "$docs" != "no"; then
echo "sphinx-build $sphinx_build"
fi
echo "genisoimage $genisoimage"
+echo "python_yaml $python_yaml"
echo "slirp support $slirp $(echo_version $slirp $slirp_version)"
if test "$slirp" != "no" ; then
echo "smbd $smbd"
@@ -7928,6 +7936,7 @@ echo "PYTHON=$python" >> $config_host_mak
echo "SPHINX_BUILD=$sphinx_build" >> $config_host_mak
echo "SPHINX_WERROR=$sphinx_werror" >> $config_host_mak
echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
+echo "PYTHON_YAML=$python_yaml" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
if $iasl -h > /dev/null 2>&1; then
echo "IASL=$iasl" >> $config_host_mak
diff --git a/tests/vm/Makefile.include b/tests/vm/Makefile.include
index a253aba45796..f6c3892bb28e 100644
--- a/tests/vm/Makefile.include
+++ b/tests/vm/Makefile.include
@@ -44,6 +44,12 @@ endif
@echo " QEMU_LOCAL=1 - Use QEMU binary local to this build."
@echo " QEMU=/path/to/qemu - Change path to QEMU binary"
@echo " QEMU_IMG=/path/to/qemu-img - Change path to qemu-img tool"
+ifeq ($(PYTHON_YAML),yes)
+ @echo " QEMU_CONFIG=/path/conf.yml - Change path to VM configuration .yml file."
+else
+ @echo " (install python3-yaml to enable support for yaml file to configure a VM.)"
+endif
+ @echo " See conf_example_*.yml for file format details."
vm-build-all: $(addprefix vm-build-, $(IMAGES))
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index cfe20c58f7ef..fa56fbbb4b60 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -481,7 +481,6 @@ class BaseVM(object):
cwd=cidir,
stdin=self._devnull, stdout=self._stdout,
stderr=self._stdout)
-
return os.path.join(cidir, "cloud-init.iso")
def get_qemu_path(arch, build_path=None):
@@ -497,6 +496,41 @@ def get_qemu_path(arch, build_path=None):
qemu_path = "qemu-system-" + arch
return qemu_path
+def parse_config(config, args):
+ """ Parse yaml config and populate our config structure.
+ The yaml config allows the user to override the
+ defaults for VM parameters. In many cases these
+ defaults can be overridden without rebuilding the VM."""
+ if args.config:
+ config_file = args.config
+ elif 'QEMU_CONFIG' in os.environ:
+ config_file = os.environ['QEMU_CONFIG']
+ else:
+ return config
+ if not os.path.exists(config_file):
+ raise Exception("config file {} does not exist".format(config_file))
+ # We gracefully handle importing the yaml module
+ # since it might not be installed.
+ # If we are here it means the user supplied a .yml file,
+ # so if the yaml module is not installed we will exit with error.
+ try:
+ import yaml
+ except ImportError:
+ print("The python3-yaml package is needed "\
+ "to support config.yaml files")
+ # Instead of raising an exception we exit to avoid
+ # a raft of messy (expected) errors to stdout.
+ exit(1)
+ with open(config_file) as f:
+ yaml_dict = yaml.safe_load(f)
+
+ if 'qemu-conf' in yaml_dict:
+ config.update(yaml_dict['qemu-conf'])
+ else:
+ raise Exception("config file {} is not valid"\
+ " missing qemu-conf".format(config_file))
+ return config
+
def parse_args(vmcls):
def get_default_jobs():
@@ -536,6 +570,9 @@ def parse_args(vmcls):
help="run tests with a snapshot")
parser.add_option("--genisoimage", default="genisoimage",
help="iso imaging tool")
+ parser.add_option("--config", "-c", default=None,
+ help="Provide config yaml for configuration. "\
+ "See config_example.yaml for example.")
parser.disable_interspersed_args()
return parser.parse_args()
@@ -547,6 +584,7 @@ def main(vmcls, config=None):
if not argv and not args.build_qemu and not args.build_image:
print("Nothing to do?")
return 1
+ config = parse_config(config, args)
logging.basicConfig(level=(logging.DEBUG if args.debug
else logging.WARN))
vm = vmcls(args, config=config)
diff --git a/tests/vm/conf_example_aarch64.yml b/tests/vm/conf_example_aarch64.yml
new file mode 100644
index 000000000000..9d44ae356f7c
--- /dev/null
+++ b/tests/vm/conf_example_aarch64.yml
@@ -0,0 +1,51 @@
+#
+# Example yaml for use by any of the scripts in tests/vm.
+# Can be provided as an environment variable QEMU_CONFIG
+#
+qemu-conf:
+
+ # If any of the below are not provided, we will just use the qemu defaults.
+
+ # Login username and password(has to be sudo enabled)
+ guest_user: qemu
+ guest_pass: "qemupass"
+
+ # Password for root user can be different from guest.
+ root_pass: "qemupass"
+
+ # If one key is provided, both must be provided.
+ #ssh_key: /complete/path/of/your/keyfile/id_rsa
+ #ssh_pub_key: /complete/path/of/your/keyfile/id_rsa.pub
+
+ cpu: max
+ machine: virt,gic-version=max
+ memory: 16G
+
+ # The below is a example for how to configure NUMA topology with
+ # 4 NUMA nodes and 2 different NUMA distances.
+ qemu_args: "-smp cpus=16,sockets=2,cores=8
+ -numa node,cpus=0-3,nodeid=0 -numa node,cpus=4-7,nodeid=1
+ -numa node,cpus=8-11,nodeid=2 -numa node,cpus=12-15,nodeid=3
+ -numa dist,src=0,dst=1,val=15 -numa dist,src=2,dst=3,val=15
+ -numa dist,src=0,dst=2,val=20 -numa dist,src=0,dst=3,val=20
+ -numa dist,src=1,dst=2,val=20 -numa dist,src=1,dst=3,val=20"
+
+ # By default we do not set the DNS.
+ # You override the defaults by setting the below.
+ #dns: 1.234.567.89
+
+ # By default we will use a "block" device, but
+ # you can also boot from a "scsi" device.
+ # Just keep in mind your scripts might need to change
+ # As you will have /dev/sda instead of /dev/vda (for block device)
+ boot_dev_type: "block"
+
+ # By default the ssh port is not fixed.
+ # A fixed ssh port makes it easier for automated tests.
+ #ssh_port: 5555
+
+ # To install a different set of packages, provide a command to issue
+ #install_cmds: "apt-get update ; apt-get build-dep -y qemu"
+
+ # Or to skip the install entirely, just provide ""
+ #install_cmds: ""
diff --git a/tests/vm/conf_example_x86.yml b/tests/vm/conf_example_x86.yml
new file mode 100644
index 000000000000..78d3f5830fa2
--- /dev/null
+++ b/tests/vm/conf_example_x86.yml
@@ -0,0 +1,50 @@
+#
+# Example yaml for use by any of the x86 based scripts in tests/vm.
+# Can be provided as an environment variable QEMU_CONFIG
+#
+qemu-conf:
+
+ # If any of the below are not provided, we will just use the qemu defaults.
+
+ # Login username and password(has to be sudo enabled)
+ guest_user: "qemu"
+ guest_pass: "qemupass"
+
+ # Password for root user can be different from guest.
+ root_pass: "qemupass"
+
+ # Provide default ssh keys of current user.
+ # You need to edit the below for your user.
+ #ssh_key_file: /home/<user>/.ssh/id_rsa
+ #ssh_pub_key_file: /home/<user>/.ssh/id_rsa.pub
+
+ cpu: max
+ machine: pc
+ memory: 8G
+
+ # The below is a example for how to configure NUMA topology with
+ # 4 NUMA nodes and 2 different NUMA distances.
+ qemu_args: "-smp cpus=8,sockets=2,cores=4
+ -object memory-backend-ram,size=4G,policy=bind,host-nodes=0,id=ram-node0
+ -object memory-backend-ram,size=4G,policy=bind,host-nodes=0,id=ram-node1
+ -object memory-backend-ram,size=4G,policy=bind,host-nodes=1,id=ram-node2
+ -object memory-backend-ram,size=4G,policy=bind,host-nodes=1,id=ram-node3
+ -numa node,cpus=0-1,nodeid=0 -numa node,cpus=2-3,nodeid=1
+ -numa node,cpus=4-5,nodeid=2 -numa node,cpus=6-7,nodeid=3
+ -numa dist,src=0,dst=1,val=15 -numa dist,src=2,dst=3,val=15
+ -numa dist,src=0,dst=2,val=20 -numa dist,src=0,dst=3,val=20
+ -numa dist,src=1,dst=2,val=20 -numa dist,src=1,dst=3,val=20"
+
+ # By default we do not set the DNS.
+ # You override the defaults by setting the below.
+ #dns: "1.234.567.89"
+
+ # By default we will use a "block" device, but
+ # you can also boot from a "scsi" device.
+ # Just keep in mind your scripts might need to change
+ # As you will have /dev/sda instead of /dev/vda (for block device)
+ boot_dev_type: "block"
+
+ # By default the ssh port is not fixed.
+ # A fixed ssh port makes it easier for automated tests.
+ ssh_port: 5555
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 06/41] tests/vm: Add common Ubuntu python module
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (4 preceding siblings ...)
2020-07-07 7:08 ` [PULL 05/41] tests/vm: Added configuration file support Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 07/41] tests/vm: Added a new script for ubuntu.aarch64 Alex Bennée
` (36 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Alex Bennée, Philippe Mathieu-Daudé,
qemu-devel, Robert Foley
From: Robert Foley <robert.foley@linaro.org>
Add a common Ubuntu python module and make use of
it with the ubuntu.i386 script.
This is preparation for adding an Ubuntu script
ubuntu.aarch64. Splitting out the common
logic such as build_image() will reduce duplication.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-5-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-9-alex.bennee@linaro.org>
diff --git a/tests/vm/ubuntu.i386 b/tests/vm/ubuntu.i386
index 24527cc78c77..5ce72610a6c8 100755
--- a/tests/vm/ubuntu.i386
+++ b/tests/vm/ubuntu.i386
@@ -11,15 +11,22 @@
# the COPYING file in the top-level directory.
#
-import os
import sys
-import subprocess
import basevm
-import time
+import ubuntuvm
-class UbuntuX86VM(basevm.BaseVM):
+DEFAULT_CONFIG = {
+ 'install_cmds' : "apt-get update,"\
+ "apt-get build-dep -y qemu,"\
+ "apt-get install -y libfdt-dev language-pack-en",
+}
+
+class UbuntuX86VM(ubuntuvm.UbuntuVM):
name = "ubuntu.i386"
arch = "i386"
+ image_link="https://cloud-images.ubuntu.com/releases/bionic/"\
+ "release-20191114/ubuntu-18.04-server-cloudimg-i386.img"
+ image_sha256="28969840626d1ea80bb249c08eef1a4533e8904aa51a327b40f37ac4b4ff04ef"
BUILD_SCRIPT = """
set -e;
cd $(mktemp -d);
@@ -29,34 +36,5 @@ class UbuntuX86VM(basevm.BaseVM):
make --output-sync {target} -j{jobs} {verbose};
"""
- def build_image(self, img):
- cimg = self._download_with_cache(
- "https://cloud-images.ubuntu.com/releases/bionic/release-20191114/ubuntu-18.04-server-cloudimg-i386.img",
- sha256sum="28969840626d1ea80bb249c08eef1a4533e8904aa51a327b40f37ac4b4ff04ef")
- img_tmp = img + ".tmp"
- subprocess.check_call(["cp", "-f", cimg, img_tmp])
- self.exec_qemu_img("resize", img_tmp, "50G")
- self.boot(img_tmp, extra_args = [
- "-device", "VGA",
- "-cdrom", self.gen_cloud_init_iso()
- ])
- self.wait_ssh()
- self.ssh_root_check("touch /etc/cloud/cloud-init.disabled")
- self.ssh_root_check("apt-get update")
- self.ssh_root_check("apt-get install -y cloud-initramfs-growroot")
- # Don't check the status in case the guest hang up too quickly
- self.ssh_root("sync && reboot")
- time.sleep(5)
- self.wait_ssh()
- # The previous update sometimes doesn't survive a reboot, so do it again
- self.ssh_root_check("sed -ie s/^#\ deb-src/deb-src/g /etc/apt/sources.list")
- self.ssh_root_check("apt-get update")
- self.ssh_root_check("apt-get build-dep -y qemu")
- self.ssh_root_check("apt-get install -y libfdt-dev language-pack-en")
- self.ssh_root("poweroff")
- self.wait()
- os.rename(img_tmp, img)
- return 0
-
if __name__ == "__main__":
- sys.exit(basevm.main(UbuntuX86VM))
+ sys.exit(basevm.main(UbuntuX86VM, DEFAULT_CONFIG))
diff --git a/tests/vm/ubuntuvm.py b/tests/vm/ubuntuvm.py
new file mode 100644
index 000000000000..6689ad87aa83
--- /dev/null
+++ b/tests/vm/ubuntuvm.py
@@ -0,0 +1,60 @@
+#!/usr/bin/env python3
+#
+# Ubuntu VM testing library
+#
+# Copyright 2017 Red Hat Inc.
+# Copyright 2020 Linaro
+#
+# Authors:
+# Robert Foley <robert.foley@linaro.org>
+# Originally based on ubuntu.i386 Fam Zheng <famz@redhat.com>
+#
+# This code is licensed under the GPL version 2 or later. See
+# the COPYING file in the top-level directory.
+
+import os
+import subprocess
+import basevm
+
+class UbuntuVM(basevm.BaseVM):
+
+ def __init__(self, args, config=None):
+ self.login_prompt = "ubuntu-{}-guest login:".format(self.arch)
+ basevm.BaseVM.__init__(self, args, config)
+
+ def build_image(self, img):
+ """Build an Ubuntu VM image. The child class will
+ define the install_cmds to init the VM."""
+ os_img = self._download_with_cache(self.image_link,
+ sha256sum=self.image_sha256)
+ img_tmp = img + ".tmp"
+ subprocess.check_call(["cp", "-f", os_img, img_tmp])
+ self.exec_qemu_img("resize", img_tmp, "+50G")
+ ci_img = self.gen_cloud_init_iso()
+
+ self.boot(img_tmp, extra_args = [ "-device", "VGA", "-cdrom", ci_img, ])
+
+ # First command we issue is fix for slow ssh login.
+ self.wait_ssh(wait_root=True,
+ cmd="chmod -x /etc/update-motd.d/*")
+ # Wait for cloud init to finish
+ self.wait_ssh(wait_root=True,
+ cmd="ls /var/lib/cloud/instance/boot-finished")
+ self.ssh_root("touch /etc/cloud/cloud-init.disabled")
+ # Disable auto upgrades.
+ # We want to keep the VM system state stable.
+ self.ssh_root('sed -ie \'s/"1"/"0"/g\' '\
+ '/etc/apt/apt.conf.d/20auto-upgrades')
+ self.ssh_root("sed -ie s/^#\ deb-src/deb-src/g /etc/apt/sources.list")
+
+ # If the user chooses not to do the install phase,
+ # then we will jump right to the graceful shutdown
+ if self._config['install_cmds'] != "":
+ # Issue the install commands.
+ # This can be overriden by the user in the config .yml.
+ install_cmds = self._config['install_cmds'].split(',')
+ for cmd in install_cmds:
+ self.ssh_root(cmd)
+ self.graceful_shutdown()
+ os.rename(img_tmp, img)
+ return 0
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 07/41] tests/vm: Added a new script for ubuntu.aarch64.
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (5 preceding siblings ...)
2020-07-07 7:08 ` [PULL 06/41] tests/vm: Add common Ubuntu python module Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 08/41] tests/vm: Added a new script for centos.aarch64 Alex Bennée
` (35 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Robert Foley, Alex Bennée, qemu-devel,
Peter Puhov, Philippe Mathieu-Daudé
From: Robert Foley <robert.foley@linaro.org>
ubuntu.aarch64 provides a script to create an Ubuntu 18.04 VM.
Another new file is also added aarch64vm.py, which is a module with
common methods used by aarch64 VMs, such as how to create the
flash images.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-6-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-10-alex.bennee@linaro.org>
diff --git a/configure b/configure
index 3cabd004e329..d2d93ae51e47 100755
--- a/configure
+++ b/configure
@@ -418,6 +418,7 @@ prefix="/usr/local"
mandir="\${prefix}/share/man"
datadir="\${prefix}/share"
firmwarepath="\${prefix}/share/qemu-firmware"
+efi_aarch64=""
qemu_docdir="\${prefix}/share/doc/qemu"
bindir="\${prefix}/bin"
libdir="\${prefix}/lib"
@@ -1109,6 +1110,8 @@ for opt do
;;
--firmwarepath=*) firmwarepath="$optarg"
;;
+ --efi-aarch64=*) efi_aarch64="$optarg"
+ ;;
--host=*|--build=*|\
--disable-dependency-tracking|\
--sbindir=*|--sharedstatedir=*|\
@@ -1787,6 +1790,7 @@ Advanced options (experts only):
--sysconfdir=PATH install config in PATH$confsuffix
--localstatedir=PATH install local state in PATH (set at runtime on win32)
--firmwarepath=PATH search PATH for firmware files
+ --efi-aarch64=PATH PATH of efi file to use for aarch64 VMs.
--with-confsuffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir [$confsuffix]
--with-pkgversion=VERS use specified string as sub-version of the package
--enable-debug enable common debug build options
@@ -3606,6 +3610,20 @@ EOF
fi
fi
+############################################
+# efi-aarch64 probe
+# Check for efi files needed by aarch64 VMs.
+# By default we will use the efi included with QEMU.
+# Allow user to override the path for efi also.
+if ! test -f "$efi_aarch64"; then
+ if test -f $source_path/pc-bios/edk2-aarch64-code.fd.bz2; then
+ # valid after build
+ efi_aarch64=$PWD/pc-bios/edk2-aarch64-code.fd
+ else
+ efi_aarch64=""
+ fi
+fi
+
##########################################
# libcap-ng library probe
if test "$cap_ng" != "no" ; then
@@ -6850,6 +6868,7 @@ if test "$docs" != "no"; then
echo "sphinx-build $sphinx_build"
fi
echo "genisoimage $genisoimage"
+echo "efi_aarch64 $efi_aarch64"
echo "python_yaml $python_yaml"
echo "slirp support $slirp $(echo_version $slirp $slirp_version)"
if test "$slirp" != "no" ; then
@@ -7936,6 +7955,7 @@ echo "PYTHON=$python" >> $config_host_mak
echo "SPHINX_BUILD=$sphinx_build" >> $config_host_mak
echo "SPHINX_WERROR=$sphinx_werror" >> $config_host_mak
echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
+echo "EFI_AARCH64=$efi_aarch64" >> $config_host_mak
echo "PYTHON_YAML=$python_yaml" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
if $iasl -h > /dev/null 2>&1; then
diff --git a/tests/vm/Makefile.include b/tests/vm/Makefile.include
index f6c3892bb28e..4fa292765d5c 100644
--- a/tests/vm/Makefile.include
+++ b/tests/vm/Makefile.include
@@ -5,6 +5,9 @@
IMAGES := freebsd netbsd openbsd centos fedora
ifneq ($(GENISOIMAGE),)
IMAGES += ubuntu.i386 centos
+ifneq ($(EFI_AARCH64),)
+IMAGES += ubuntu.aarch64
+endif
endif
IMAGES_DIR := $(HOME)/.cache/qemu-vm/images
@@ -23,6 +26,11 @@ vm-help vm-test:
ifneq ($(GENISOIMAGE),)
@echo " vm-build-centos - Build QEMU in CentOS VM, with Docker"
@echo " vm-build-ubuntu.i386 - Build QEMU in ubuntu i386 VM"
+ifneq ($(EFI_AARCH64),)
+ @echo " vm-build-ubuntu.aarch64 - Build QEMU in ubuntu aarch64 VM"
+else
+ @echo " (to build centos/ubuntu aarch64 images use configure --efi-aarch64)"
+endif
else
@echo " (install genisoimage to build centos/ubuntu images)"
endif
@@ -65,6 +73,7 @@ $(IMAGES_DIR)/%.img: $(SRC_PATH)/tests/vm/% \
$(if $(V)$(DEBUG), --debug) \
$(if $(GENISOIMAGE),--genisoimage $(GENISOIMAGE)) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
+ $(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
--image "$@" \
--force \
--build-image $@, \
@@ -80,6 +89,7 @@ vm-build-%: $(IMAGES_DIR)/%.img
$(if $(J),--jobs $(J)) \
$(if $(V),--verbose) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
+ $(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
--image "$<" \
$(if $(BUILD_TARGET),--build-target $(BUILD_TARGET)) \
--snapshot \
@@ -102,6 +112,7 @@ vm-boot-ssh-%: $(IMAGES_DIR)/%.img
$(if $(J),--jobs $(J)) \
$(if $(V)$(DEBUG), --debug) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
+ $(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
--image "$<" \
--interactive \
false, \
diff --git a/tests/vm/aarch64vm.py b/tests/vm/aarch64vm.py
new file mode 100644
index 000000000000..bb04cb19c911
--- /dev/null
+++ b/tests/vm/aarch64vm.py
@@ -0,0 +1,106 @@
+#!/usr/bin/env python3
+#
+# VM testing aarch64 library
+#
+# Copyright 2020 Linaro
+#
+# Authors:
+# Robert Foley <robert.foley@linaro.org>
+#
+# This code is licensed under the GPL version 2 or later. See
+# the COPYING file in the top-level directory.
+#
+import os
+import sys
+import subprocess
+import basevm
+from qemu.accel import kvm_available
+
+# This is the config needed for current version of QEMU.
+# This works for both kvm and tcg.
+CURRENT_CONFIG = {
+ 'cpu' : "max",
+ 'machine' : "virt,gic-version=max",
+}
+
+# The minimum minor version of QEMU we will support with aarch64 VMs is 3.
+# QEMU versions less than 3 have various issues running these VMs.
+QEMU_AARCH64_MIN_VERSION = 3
+
+# The DEFAULT_CONFIG will default to a version of
+# parameters that works for backwards compatibility.
+DEFAULT_CONFIG = {'kvm' : {'cpu' : "host",
+ 'machine' : "virt,gic-version=host"},
+ 'tcg' : {'cpu' : "cortex-a57",
+ 'machine' : "virt"},
+}
+
+def get_config_defaults(vmcls, default_config):
+ """Fetch the configuration defaults for this VM,
+ taking into consideration the defaults for
+ aarch64 first, followed by the defaults for this VM."""
+ config = default_config
+ config.update(aarch_get_config_defaults(vmcls))
+ return config
+
+def aarch_get_config_defaults(vmcls):
+ """Set the defaults for current version of QEMU."""
+ config = CURRENT_CONFIG
+ args, argv = basevm.parse_args(vmcls)
+ qemu_path = basevm.get_qemu_path(vmcls.arch, args.build_path)
+ qemu_version = basevm.get_qemu_version(qemu_path)
+ if qemu_version < QEMU_AARCH64_MIN_VERSION:
+ error = "\nThis major version of QEMU {} is to old for aarch64 VMs.\n"\
+ "The major version must be at least {}.\n"\
+ "To continue with the current build of QEMU, "\
+ "please restart with QEMU_LOCAL=1 .\n"
+ print(error.format(qemu_version, QEMU_AARCH64_MIN_VERSION))
+ exit(1)
+ if qemu_version == QEMU_AARCH64_MIN_VERSION:
+ # We have an older version of QEMU,
+ # set the config values for backwards compatibility.
+ if kvm_available('aarch64'):
+ config.update(DEFAULT_CONFIG['kvm'])
+ else:
+ config.update(DEFAULT_CONFIG['tcg'])
+ return config
+
+def create_flash_images(flash_dir="./", efi_img=""):
+ """Creates the appropriate pflash files
+ for an aarch64 VM."""
+ flash0_path = get_flash_path(flash_dir, "flash0")
+ flash1_path = get_flash_path(flash_dir, "flash1")
+ fd_null = open(os.devnull, 'w')
+ subprocess.check_call(["dd", "if=/dev/zero", "of={}".format(flash0_path),
+ "bs=1M", "count=64"],
+ stdout=fd_null, stderr=subprocess.STDOUT)
+ # A reliable way to get the QEMU EFI image is via an installed package or
+ # via the bios included with qemu.
+ if not os.path.exists(efi_img):
+ sys.stderr.write("*** efi argument is invalid ({})\n".format(efi_img))
+ sys.stderr.write("*** please check --efi-aarch64 argument or "\
+ "install qemu-efi-aarch64 package\n")
+ exit(3)
+ subprocess.check_call(["dd", "if={}".format(efi_img),
+ "of={}".format(flash0_path),
+ "conv=notrunc"],
+ stdout=fd_null, stderr=subprocess.STDOUT)
+ subprocess.check_call(["dd", "if=/dev/zero",
+ "of={}".format(flash1_path),
+ "bs=1M", "count=64"],
+ stdout=fd_null, stderr=subprocess.STDOUT)
+ fd_null.close()
+
+def get_pflash_args(flash_dir="./"):
+ """Returns a string that can be used to
+ boot qemu using the appropriate pflash files
+ for aarch64."""
+ flash0_path = get_flash_path(flash_dir, "flash0")
+ flash1_path = get_flash_path(flash_dir, "flash1")
+ pflash_args_str = "-drive file={},format=raw,if=pflash "\
+ "-drive file={},format=raw,if=pflash"
+ pflash_args = pflash_args_str.format(flash0_path, flash1_path)
+ return pflash_args.split(" ")
+
+def get_flash_path(flash_dir, name):
+ return os.path.join(flash_dir, "{}.img".format(name))
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index fa56fbbb4b60..5fd66f6b26a1 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -92,6 +92,7 @@ class BaseVM(object):
self._guest = None
self._genisoimage = args.genisoimage
self._build_path = args.build_path
+ self._efi_aarch64 = args.efi_aarch64
# Allow input config to override defaults.
self._config = DEFAULT_CONFIG.copy()
if config != None:
@@ -496,6 +497,14 @@ def get_qemu_path(arch, build_path=None):
qemu_path = "qemu-system-" + arch
return qemu_path
+def get_qemu_version(qemu_path):
+ """Get the version number from the current QEMU,
+ and return the major number."""
+ output = subprocess.check_output([qemu_path, '--version'])
+ version_line = output.decode("utf-8")
+ version_num = re.split(' |\(', version_line)[3].split('.')[0]
+ return int(version_num)
+
def parse_config(config, args):
""" Parse yaml config and populate our config structure.
The yaml config allows the user to override the
@@ -573,6 +582,9 @@ def parse_args(vmcls):
parser.add_option("--config", "-c", default=None,
help="Provide config yaml for configuration. "\
"See config_example.yaml for example.")
+ parser.add_option("--efi-aarch64",
+ default="/usr/share/qemu-efi-aarch64/QEMU_EFI.fd",
+ help="Path to efi image for aarch64 VMs.")
parser.disable_interspersed_args()
return parser.parse_args()
diff --git a/tests/vm/ubuntu.aarch64 b/tests/vm/ubuntu.aarch64
new file mode 100755
index 000000000000..21d454c27f1a
--- /dev/null
+++ b/tests/vm/ubuntu.aarch64
@@ -0,0 +1,68 @@
+#!/usr/bin/env python3
+#
+# Ubuntu aarch64 image
+#
+# Copyright 2020 Linaro
+#
+# Authors:
+# Robert Foley <robert.foley@linaro.org>
+# Originally based on ubuntu.i386 Fam Zheng <famz@redhat.com>
+#
+# This code is licensed under the GPL version 2 or later. See
+# the COPYING file in the top-level directory.
+#
+
+import sys
+import basevm
+import aarch64vm
+import ubuntuvm
+
+DEFAULT_CONFIG = {
+ 'cpu' : "cortex-a57",
+ 'machine' : "virt,gic-version=3",
+ 'install_cmds' : "apt-get update,"\
+ "apt-get build-dep -y --arch-only qemu,"\
+ "apt-get install -y libfdt-dev pkg-config language-pack-en",
+ # We increase beyond the default time since during boot
+ # it can take some time (many seconds) to log into the VM
+ # especially using softmmu.
+ 'ssh_timeout' : 60,
+}
+
+class UbuntuAarch64VM(ubuntuvm.UbuntuVM):
+ name = "ubuntu.aarch64"
+ arch = "aarch64"
+ image_name = "ubuntu-18.04-server-cloudimg-arm64.img"
+ image_link = "https://cloud-images.ubuntu.com/releases/18.04/release/" + image_name
+ image_sha256="0fdcba761965735a8a903d8b88df8e47f156f48715c00508e4315c506d7d3cb1"
+ BUILD_SCRIPT = """
+ set -e;
+ cd $(mktemp -d);
+ sudo chmod a+r /dev/vdb;
+ tar --checkpoint=.10 -xf /dev/vdb;
+ ./configure {configure_opts};
+ make --output-sync {target} -j{jobs} {verbose};
+ """
+ def boot(self, img, extra_args=None):
+ aarch64vm.create_flash_images(self._tmpdir, self._efi_aarch64)
+ default_args = aarch64vm.get_pflash_args(self._tmpdir)
+ if extra_args:
+ extra_args.extend(default_args)
+ else:
+ extra_args = default_args
+ # We always add these performance tweaks
+ # because without them, we boot so slowly that we
+ # can time out finding the boot efi device.
+ if '-smp' not in extra_args and \
+ '-smp' not in self._config['extra_args'] and \
+ '-smp' not in self._args:
+ # Only add if not already there to give caller option to change it.
+ extra_args.extend(["-smp", "8"])
+
+ # We have overridden boot() since aarch64 has additional parameters.
+ # Call down to the base class method.
+ super(UbuntuAarch64VM, self).boot(img, extra_args=extra_args)
+
+if __name__ == "__main__":
+ defaults = aarch64vm.get_config_defaults(UbuntuAarch64VM, DEFAULT_CONFIG)
+ sys.exit(basevm.main(UbuntuAarch64VM, defaults))
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 08/41] tests/vm: Added a new script for centos.aarch64.
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (6 preceding siblings ...)
2020-07-07 7:08 ` [PULL 07/41] tests/vm: Added a new script for ubuntu.aarch64 Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 09/41] tests/vm: change scripts to use self._config Alex Bennée
` (34 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Robert Foley, Alex Bennée, qemu-devel,
Peter Puhov, Philippe Mathieu-Daudé
From: Robert Foley <robert.foley@linaro.org>
centos.aarch64 creates a CentOS 8 image.
Also added a new kickstart script used to build the centos.aarch64 image.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-7-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-11-alex.bennee@linaro.org>
diff --git a/tests/vm/Makefile.include b/tests/vm/Makefile.include
index 4fa292765d5c..39f918a430a5 100644
--- a/tests/vm/Makefile.include
+++ b/tests/vm/Makefile.include
@@ -6,7 +6,7 @@ IMAGES := freebsd netbsd openbsd centos fedora
ifneq ($(GENISOIMAGE),)
IMAGES += ubuntu.i386 centos
ifneq ($(EFI_AARCH64),)
-IMAGES += ubuntu.aarch64
+IMAGES += ubuntu.aarch64 centos.aarch64
endif
endif
@@ -28,6 +28,7 @@ ifneq ($(GENISOIMAGE),)
@echo " vm-build-ubuntu.i386 - Build QEMU in ubuntu i386 VM"
ifneq ($(EFI_AARCH64),)
@echo " vm-build-ubuntu.aarch64 - Build QEMU in ubuntu aarch64 VM"
+ @echo " vm-build-centos.aarch64 - Build QEMU in CentOS aarch64 VM"
else
@echo " (to build centos/ubuntu aarch64 images use configure --efi-aarch64)"
endif
diff --git a/tests/vm/centos-8-aarch64.ks b/tests/vm/centos-8-aarch64.ks
new file mode 100644
index 000000000000..fd6ebe4d49ed
--- /dev/null
+++ b/tests/vm/centos-8-aarch64.ks
@@ -0,0 +1,51 @@
+# CentOS aarch64 image kickstart file.
+# This file is used by the CentOS installer to
+# script the generation of the image.
+#
+# Copyright 2020 Linaro
+#
+ignoredisk --only-use=vda
+# System bootloader configuration
+bootloader --append=" crashkernel=auto" --location=mbr --boot-drive=vda
+autopart --type=plain
+# Partition clearing information
+clearpart --linux --initlabel --drives=vda
+# Use text mode install
+text
+repo --name="AppStream" --baseurl=file:///run/install/repo/AppStream
+# Use CDROM installation media
+cdrom
+# Keyboard layouts
+keyboard --vckeymap=us --xlayouts=''
+# System language
+lang en_US.UTF-8
+
+# Network information
+network --bootproto=dhcp --device=enp0s1 --onboot=off --ipv6=auto --no-activate
+network --hostname=localhost.localdomain
+# Run the Setup Agent on first boot
+firstboot --enable
+# Do not configure the X Window System
+skipx
+# System services
+services --enabled="chronyd"
+# System timezone
+timezone America/New_York --isUtc
+
+# Shutdown after installation is complete.
+shutdown
+
+%packages
+@^server-product-environment
+kexec-tools
+
+%end
+
+%addon com_redhat_kdump --enable --reserve-mb='auto'
+
+%end
+%anaconda
+pwpolicy root --minlen=6 --minquality=1 --notstrict --nochanges --notempty
+pwpolicy user --minlen=6 --minquality=1 --notstrict --nochanges --emptyok
+pwpolicy luks --minlen=6 --minquality=1 --notstrict --nochanges --notempty
+%end
diff --git a/tests/vm/centos.aarch64 b/tests/vm/centos.aarch64
new file mode 100755
index 000000000000..d5232ecdb8c0
--- /dev/null
+++ b/tests/vm/centos.aarch64
@@ -0,0 +1,227 @@
+#!/usr/bin/env python3
+#
+# Centos aarch64 image
+#
+# Copyright 2020 Linaro
+#
+# Authors:
+# Robert Foley <robert.foley@linaro.org>
+# Originally based on ubuntu.aarch64
+#
+# This code is licensed under the GPL version 2 or later. See
+# the COPYING file in the top-level directory.
+#
+
+import os
+import sys
+import subprocess
+import basevm
+import time
+import traceback
+import aarch64vm
+
+DEFAULT_CONFIG = {
+ 'cpu' : "max",
+ 'machine' : "virt,gic-version=max",
+ 'install_cmds' : "yum install -y make git python3 gcc gcc-c++ flex bison, "\
+ "yum install -y glib2-devel pixman-devel zlib-devel, "\
+ "yum install -y perl-Test-Harness, "\
+ "alternatives --set python /usr/bin/python3, "\
+ "sudo dnf config-manager "\
+ "--add-repo=https://download.docker.com/linux/centos/docker-ce.repo,"\
+ "sudo dnf install --nobest -y docker-ce.aarch64,"\
+ "systemctl enable docker",
+ # We increase beyond the default time since during boot
+ # it can take some time (many seconds) to log into the VM.
+ 'ssh_timeout' : 60,
+}
+
+class CentosAarch64VM(basevm.BaseVM):
+ name = "centos.aarch64"
+ arch = "aarch64"
+ login_prompt = "localhost login:"
+ prompt = '[root@localhost ~]#'
+ image_name = "CentOS-8-aarch64-1905-dvd1.iso"
+ image_link = "http://mirrors.usc.edu/pub/linux/distributions/centos/8.0.1905/isos/aarch64/"
+ image_link += image_name
+ BUILD_SCRIPT = """
+ set -e;
+ cd $(mktemp -d);
+ sudo chmod a+r /dev/vdb;
+ tar --checkpoint=.10 -xf /dev/vdb;
+ ./configure {configure_opts};
+ make --output-sync {target} -j{jobs} {verbose};
+ """
+ def set_key_perm(self):
+ """Set permissions properly on certain files to allow
+ ssh access."""
+ self.console_wait_send(self.prompt,
+ "/usr/sbin/restorecon -R -v /root/.ssh\n")
+ self.console_wait_send(self.prompt,
+ "/usr/sbin/restorecon -R -v "\
+ "/home/{}/.ssh\n".format(self._config["guest_user"]))
+
+ def create_kickstart(self):
+ """Generate the kickstart file used to generate the centos image."""
+ # Start with the template for the kickstart.
+ ks_file = "../tests/vm/centos-8-aarch64.ks"
+ subprocess.check_call("cp {} ./ks.cfg".format(ks_file), shell=True)
+ # Append the ssh keys to the kickstart file
+ # as the post processing phase of installation.
+ with open("ks.cfg", "a") as f:
+ # Add in the root pw and guest user.
+ rootpw = "rootpw --plaintext {}\n"
+ f.write(rootpw.format(self._config["root_pass"]))
+ add_user = "user --groups=wheel --name={} "\
+ "--password={} --plaintext\n"
+ f.write(add_user.format(self._config["guest_user"],
+ self._config["guest_pass"]))
+ # Add the ssh keys.
+ f.write("%post --log=/root/ks-post.log\n")
+ f.write("mkdir -p /root/.ssh\n")
+ addkey = 'echo "{}" >> /root/.ssh/authorized_keys\n'
+ addkey_cmd = addkey.format(self._config["ssh_pub_key"])
+ f.write(addkey_cmd)
+ f.write('mkdir -p /home/{}/.ssh\n'.format(self._config["guest_user"]))
+ addkey = 'echo "{}" >> /home/{}/.ssh/authorized_keys\n'
+ addkey_cmd = addkey.format(self._config["ssh_pub_key"],
+ self._config["guest_user"])
+ f.write(addkey_cmd)
+ f.write("%end\n")
+ # Take our kickstart file and create an .iso from it.
+ # The .iso will be provided to qemu as we boot
+ # from the install dvd.
+ # Anaconda will recognize the label "OEMDRV" and will
+ # start the automated installation.
+ gen_iso_img = 'genisoimage -output ks.iso -volid "OEMDRV" ks.cfg'
+ subprocess.check_call(gen_iso_img, shell=True)
+
+ def wait_for_shutdown(self):
+ """We wait for qemu to shutdown the VM and exit.
+ While this happens we display the console view
+ for easier debugging."""
+ # The image creation is essentially done,
+ # so whether or not the wait is successful we want to
+ # wait for qemu to exit (the self.wait()) before we return.
+ try:
+ self.console_wait("reboot: Power down")
+ except Exception as e:
+ sys.stderr.write("Exception hit\n")
+ if isinstance(e, SystemExit) and e.code == 0:
+ return 0
+ traceback.print_exc()
+ finally:
+ self.wait()
+
+ def build_base_image(self, dest_img):
+ """Run through the centos installer to create
+ a base image with name dest_img."""
+ # We create the temp image, and only rename
+ # to destination when we are done.
+ img = dest_img + ".tmp"
+ # Create an empty image.
+ # We will provide this as the install destination.
+ qemu_img_create = "qemu-img create {} 50G".format(img)
+ subprocess.check_call(qemu_img_create, shell=True)
+
+ # Create our kickstart file to be fed to the installer.
+ self.create_kickstart()
+ # Boot the install dvd with the params as our ks.iso
+ os_img = self._download_with_cache(self.image_link)
+ dvd_iso = "centos-8-dvd.iso"
+ subprocess.check_call(["cp", "-f", os_img, dvd_iso])
+ extra_args = "-cdrom ks.iso"
+ extra_args += " -drive file={},if=none,id=drive1,cache=writeback"
+ extra_args += " -device virtio-blk,drive=drive1,bootindex=1"
+ extra_args = extra_args.format(dvd_iso).split(" ")
+ self.boot(img, extra_args=extra_args)
+ self.console_wait_send("change the selection", "\n")
+ # We seem to need to hit esc (chr(27)) twice to abort the
+ # media check, which takes a long time.
+ # Waiting a bit seems to be more reliable before hitting esc.
+ self.console_wait("Checking")
+ time.sleep(5)
+ self.console_wait_send("Checking", chr(27))
+ time.sleep(5)
+ self.console_wait_send("Checking", chr(27))
+ print("Found Checking")
+ # Give sufficient time for the installer to create the image.
+ self.console_init(timeout=7200)
+ self.wait_for_shutdown()
+ os.rename(img, dest_img)
+ print("Done with base image build: {}".format(dest_img))
+
+ def check_create_base_img(self, img_base, img_dest):
+ """Create a base image using the installer.
+ We will use the base image if it exists.
+ This helps cut down on install time in case we
+ need to restart image creation,
+ since the base image creation can take a long time."""
+ if not os.path.exists(img_base):
+ print("Generate new base image: {}".format(img_base))
+ self.build_base_image(img_base);
+ else:
+ print("Use existing base image: {}".format(img_base))
+ # Save a copy of the base image and copy it to dest.
+ # which we will use going forward.
+ subprocess.check_call(["cp", img_base, img_dest])
+
+ def boot(self, img, extra_args=None):
+ aarch64vm.create_flash_images(self._tmpdir, self._efi_aarch64)
+ default_args = aarch64vm.get_pflash_args(self._tmpdir)
+ if extra_args:
+ extra_args.extend(default_args)
+ else:
+ extra_args = default_args
+ # We always add these performance tweaks
+ # because without them, we boot so slowly that we
+ # can time out finding the boot efi device.
+ if '-smp' not in extra_args and \
+ '-smp' not in self._config['extra_args'] and \
+ '-smp' not in self._args:
+ # Only add if not already there to give caller option to change it.
+ extra_args.extend(["-smp", "8"])
+ # We have overridden boot() since aarch64 has additional parameters.
+ # Call down to the base class method.
+ super(CentosAarch64VM, self).boot(img, extra_args=extra_args)
+
+ def build_image(self, img):
+ img_tmp = img + ".tmp"
+ self.check_create_base_img(img + ".base", img_tmp)
+
+ # Boot the new image for the first time to finish installation.
+ self.boot(img_tmp)
+ self.console_init()
+ self.console_wait_send(self.login_prompt, "root\n")
+ self.console_wait_send("Password:",
+ "{}\n".format(self._config["root_pass"]))
+
+ self.set_key_perm()
+ self.console_wait_send(self.prompt, "rpm -q centos-release\n")
+ enable_adapter = "sed -i 's/ONBOOT=no/ONBOOT=yes/g'" \
+ " /etc/sysconfig/network-scripts/ifcfg-enp0s1\n"
+ self.console_wait_send(self.prompt, enable_adapter)
+ self.console_wait_send(self.prompt, "ifup enp0s1\n")
+ self.console_wait_send(self.prompt,
+ 'echo "qemu ALL=(ALL) NOPASSWD:ALL" | '\
+ 'sudo tee /etc/sudoers.d/qemu\n')
+ self.console_wait(self.prompt)
+
+ # Rest of the commands we issue through ssh.
+ self.wait_ssh(wait_root=True)
+
+ # If the user chooses *not* to do the second phase,
+ # then we will jump right to the graceful shutdown
+ if self._config['install_cmds'] != "":
+ install_cmds = self._config['install_cmds'].split(',')
+ for cmd in install_cmds:
+ self.ssh_root(cmd)
+ self.ssh_root("poweroff")
+ self.wait_for_shutdown()
+ os.rename(img_tmp, img)
+ print("image creation complete: {}".format(img))
+ return 0
+
+if __name__ == "__main__":
+ defaults = aarch64vm.get_config_defaults(CentosAarch64VM, DEFAULT_CONFIG)
+ sys.exit(basevm.main(CentosAarch64VM, defaults))
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 09/41] tests/vm: change scripts to use self._config
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (7 preceding siblings ...)
2020-07-07 7:08 ` [PULL 08/41] tests/vm: Added a new script for centos.aarch64 Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 10/41] python/qemu: Add ConsoleSocket for optional use in QEMUMachine Alex Bennée
` (33 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Robert Foley, Alex Bennée, qemu-devel,
Peter Puhov, Philippe Mathieu-Daudé
From: Robert Foley <robert.foley@linaro.org>
This change converts existing scripts to using for example self.ROOT_PASS,
to self._config['root_pass'].
We made similar changes for GUEST_USER, and GUEST_PASS.
This allows us also to remove the change in basevm.py,
which adds __getattr__ for backwards compatibility.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200601211421.1277-8-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-12-alex.bennee@linaro.org>
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index 5fd66f6b26a1..f716798b405e 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -183,13 +183,6 @@ class BaseVM(object):
self.console_init(timeout=timeout)
self.console_wait(wait_string)
- def __getattr__(self, name):
- # Support direct access to config by key.
- # for example, access self._config['cpu'] by self.cpu
- if name.lower() in self._config.keys():
- return self._config[name.lower()]
- return object.__getattribute__(self, name)
-
def _download_with_cache(self, url, sha256sum=None, sha512sum=None):
def check_sha256sum(fname):
if not sha256sum:
@@ -239,13 +232,13 @@ class BaseVM(object):
return r
def ssh(self, *cmd):
- return self._ssh_do(self.GUEST_USER, cmd, False)
+ return self._ssh_do(self._config["guest_user"], cmd, False)
def ssh_root(self, *cmd):
return self._ssh_do("root", cmd, False)
def ssh_check(self, *cmd):
- self._ssh_do(self.GUEST_USER, cmd, True)
+ self._ssh_do(self._config["guest_user"], cmd, True)
def ssh_root_check(self, *cmd):
self._ssh_do("root", cmd, True)
diff --git a/tests/vm/fedora b/tests/vm/fedora
index a9195670f4bd..b2b478fdbcac 100755
--- a/tests/vm/fedora
+++ b/tests/vm/fedora
@@ -108,20 +108,20 @@ class FedoraVM(basevm.BaseVM):
self.console_wait_send("7) [!] Root password", "7\n")
self.console_wait("Password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait("Password (confirm):")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait_send("8) [ ] User creation", "8\n")
self.console_wait_send("1) [ ] Create user", "1\n")
self.console_wait_send("3) User name", "3\n")
- self.console_wait_send("ENTER:", "%s\n" % self.GUEST_USER)
+ self.console_wait_send("ENTER:", "%s\n" % self._config["guest_user"])
self.console_wait_send("4) [ ] Use password", "4\n")
self.console_wait_send("5) Password", "5\n")
self.console_wait("Password:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("Password (confirm):")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait_send("7) Groups", "c\n")
while True:
@@ -139,7 +139,7 @@ class FedoraVM(basevm.BaseVM):
if good:
break
time.sleep(10)
- self.console_send("r\n" % self.GUEST_PASS)
+ self.console_send("r\n" % self._config["guest_pass"])
self.console_wait_send("'b' to begin install", "b\n")
@@ -150,12 +150,13 @@ class FedoraVM(basevm.BaseVM):
# setup qemu user
prompt = " ~]$"
- self.console_ssh_init(prompt, self.GUEST_USER, self.GUEST_PASS)
+ self.console_ssh_init(prompt, self._config["guest_user"],
+ self._config["guest_pass"])
self.console_wait_send(prompt, "exit\n")
# setup root user
prompt = " ~]#"
- self.console_ssh_init(prompt, "root", self.ROOT_PASS)
+ self.console_ssh_init(prompt, "root", self._config["root_pass"])
self.console_sshd_config(prompt)
# setup virtio-blk #1 (tarfile)
diff --git a/tests/vm/freebsd b/tests/vm/freebsd
index f87db2b126e6..29252fa4a64a 100755
--- a/tests/vm/freebsd
+++ b/tests/vm/freebsd
@@ -113,9 +113,9 @@ class FreeBSDVM(basevm.BaseVM):
# post-install configuration
self.console_wait("New Password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait("Retype New Password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait_send("Network Configuration", "\n")
self.console_wait_send("IPv4", "y")
@@ -134,9 +134,9 @@ class FreeBSDVM(basevm.BaseVM):
# qemu user
self.console_wait_send("Add User Accounts", "y")
self.console_wait("Username")
- self.console_send("%s\n" % self.GUEST_USER)
+ self.console_send("%s\n" % self._config["guest_user"])
self.console_wait("Full name")
- self.console_send("%s\n" % self.GUEST_USER)
+ self.console_send("%s\n" % self._config["guest_user"])
self.console_wait_send("Uid", "\n")
self.console_wait_send("Login group", "\n")
self.console_wait_send("Login group", "\n")
@@ -148,9 +148,9 @@ class FreeBSDVM(basevm.BaseVM):
self.console_wait_send("Use an empty password", "\n")
self.console_wait_send("Use a random password", "\n")
self.console_wait("Enter password:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("Enter password again:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait_send("Lock out", "\n")
self.console_wait_send("OK", "yes\n")
self.console_wait_send("Add another user", "no\n")
@@ -164,12 +164,12 @@ class FreeBSDVM(basevm.BaseVM):
# setup qemu user
prompt = "$"
- self.console_ssh_init(prompt, self.GUEST_USER, self.GUEST_PASS)
+ self.console_ssh_init(prompt, self._config["guest_user"], self._config["guest_pass"])
self.console_wait_send(prompt, "exit\n")
# setup root user
prompt = "root@freebsd:~ #"
- self.console_ssh_init(prompt, "root", self.ROOT_PASS)
+ self.console_ssh_init(prompt, "root", self._config["root_pass"])
self.console_sshd_config(prompt)
# setup serial console
diff --git a/tests/vm/netbsd b/tests/vm/netbsd
index cdac502dad86..dc0e45c1d45a 100755
--- a/tests/vm/netbsd
+++ b/tests/vm/netbsd
@@ -120,24 +120,24 @@ class NetBSDVM(basevm.BaseVM):
self.console_wait_send("d: Change root password", "d\n")
self.console_wait_send("a: Yes", "a\n")
self.console_wait("New password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait("New password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait("Retype new password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait_send("o: Add a user", "o\n")
self.console_wait("username")
- self.console_send("%s\n" % self.GUEST_USER)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("to group wheel")
self.console_wait_send("a: Yes", "a\n")
self.console_wait_send("a: /bin/sh", "a\n")
self.console_wait("New password:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("New password:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("Retype new password:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait_send("a: Configure network", "a\n")
self.console_wait_send("a: vioif0", "a\n")
@@ -170,12 +170,13 @@ class NetBSDVM(basevm.BaseVM):
# setup qemu user
prompt = "localhost$"
- self.console_ssh_init(prompt, self.GUEST_USER, self.GUEST_PASS)
+ self.console_ssh_init(prompt, self._config["guest_user"],
+ self._config["guest_pass"])
self.console_wait_send(prompt, "exit\n")
# setup root user
prompt = "localhost#"
- self.console_ssh_init(prompt, "root", self.ROOT_PASS)
+ self.console_ssh_init(prompt, "root", self._config["root_pass"])
self.console_sshd_config(prompt)
# setup virtio-blk #1 (tarfile)
diff --git a/tests/vm/openbsd b/tests/vm/openbsd
index 13e7f9a6d56f..dfe633e45325 100755
--- a/tests/vm/openbsd
+++ b/tests/vm/openbsd
@@ -98,9 +98,9 @@ class OpenBSDVM(basevm.BaseVM):
self.console_wait_send("Which network interface", "done\n")
self.console_wait_send("DNS domain name", "localnet\n")
self.console_wait("Password for root account")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait("Password for root account")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait_send("Start sshd(8)", "yes\n")
self.console_wait_send("X Window System", "\n")
self.console_wait_send("xenodm", "\n")
@@ -108,13 +108,13 @@ class OpenBSDVM(basevm.BaseVM):
self.console_wait_send("Which speed", "\n")
self.console_wait("Setup a user")
- self.console_send("%s\n" % self.GUEST_USER)
+ self.console_send("%s\n" % self._config["guest_user"])
self.console_wait("Full name")
- self.console_send("%s\n" % self.GUEST_USER)
+ self.console_send("%s\n" % self._config["guest_user"])
self.console_wait("Password")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("Password")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait_send("Allow root ssh login", "yes\n")
self.console_wait_send("timezone", "UTC\n")
@@ -135,12 +135,13 @@ class OpenBSDVM(basevm.BaseVM):
# setup qemu user
prompt = "$"
- self.console_ssh_init(prompt, self.GUEST_USER, self.GUEST_PASS)
+ self.console_ssh_init(prompt, self._config["guest_user"],
+ self._config["guest_pass"])
self.console_wait_send(prompt, "exit\n")
# setup root user
prompt = "openbsd#"
- self.console_ssh_init(prompt, "root", self.ROOT_PASS)
+ self.console_ssh_init(prompt, "root", self._config["root_pass"])
self.console_sshd_config(prompt)
# setup virtio-blk #1 (tarfile)
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 10/41] python/qemu: Add ConsoleSocket for optional use in QEMUMachine
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (8 preceding siblings ...)
2020-07-07 7:08 ` [PULL 09/41] tests/vm: change scripts to use self._config Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-10 19:20 ` John Snow
2020-07-07 7:08 ` [PULL 11/41] tests/vm: Add workaround to consume console Alex Bennée
` (32 subsequent siblings)
42 siblings, 1 reply; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Eduardo Habkost, Philippe Mathieu-Daudé, qemu-devel,
Cleber Rosa, Peter Puhov, Alex Bennée, Robert Foley
From: Robert Foley <robert.foley@linaro.org>
We add the ConsoleSocket object, which has a socket interface
and which will consume all arriving characters on the
socket, placing them into an in memory buffer.
This will also provide those chars via recv() as
would a regular socket.
ConsoleSocket also has the option of dumping
the console bytes to a log file.
We also give QEMUMachine the option of using ConsoleSocket
to drain and to use for logging console to a file.
By default QEMUMachine does not use ConsoleSocket.
This is added in preparation for use by basevm.py in a later commit.
This is a workaround we found was needed for basevm.py since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-9-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-13-alex.bennee@linaro.org>
diff --git a/python/qemu/console_socket.py b/python/qemu/console_socket.py
new file mode 100644
index 000000000000..830cb7c62825
--- /dev/null
+++ b/python/qemu/console_socket.py
@@ -0,0 +1,110 @@
+#!/usr/bin/env python3
+#
+# This python module implements a ConsoleSocket object which is
+# designed always drain the socket itself, and place
+# the bytes into a in memory buffer for later processing.
+#
+# Optionally a file path can be passed in and we will also
+# dump the characters to this file for debug.
+#
+# Copyright 2020 Linaro
+#
+# Authors:
+# Robert Foley <robert.foley@linaro.org>
+#
+# This code is licensed under the GPL version 2 or later. See
+# the COPYING file in the top-level directory.
+#
+import asyncore
+import socket
+import threading
+import io
+import os
+import sys
+from collections import deque
+import time
+import traceback
+
+class ConsoleSocket(asyncore.dispatcher):
+
+ def __init__(self, address, file=None):
+ self._recv_timeout_sec = 300
+ self._buffer = deque()
+ self._asyncore_thread = None
+ self._sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+ self._sock.connect(address)
+ self._logfile = None
+ if file:
+ self._logfile = open(file, "w")
+ asyncore.dispatcher.__init__(self, sock=self._sock)
+ self._open = True
+ self._thread_start()
+
+ def _thread_start(self):
+ """Kick off a thread to wait on the asyncore.loop"""
+ if self._asyncore_thread is not None:
+ return
+ self._asyncore_thread = threading.Thread(target=asyncore.loop,
+ kwargs={'timeout':1})
+ self._asyncore_thread.daemon = True
+ self._asyncore_thread.start()
+
+ def handle_close(self):
+ """redirect close to base class"""
+ # Call the base class close, but not self.close() since
+ # handle_close() occurs in the context of the thread which
+ # self.close() attempts to join.
+ asyncore.dispatcher.close(self)
+
+ def close(self):
+ """Close the base object and wait for the thread to terminate"""
+ if self._open:
+ self._open = False
+ asyncore.dispatcher.close(self)
+ if self._asyncore_thread is not None:
+ thread, self._asyncore_thread = self._asyncore_thread, None
+ thread.join()
+ if self._logfile:
+ self._logfile.close()
+ self._logfile = None
+
+ def handle_read(self):
+ """process arriving characters into in memory _buffer"""
+ try:
+ data = asyncore.dispatcher.recv(self, 1)
+ # latin1 is needed since there are some chars
+ # we are receiving that cannot be encoded to utf-8
+ # such as 0xe2, 0x80, 0xA6.
+ string = data.decode("latin1")
+ except:
+ print("Exception seen.")
+ traceback.print_exc()
+ return
+ if self._logfile:
+ self._logfile.write("{}".format(string))
+ self._logfile.flush()
+ for c in string:
+ self._buffer.extend(c)
+
+ def recv(self, n=1, sleep_delay_s=0.1):
+ """Return chars from in memory buffer"""
+ start_time = time.time()
+ while len(self._buffer) < n:
+ time.sleep(sleep_delay_s)
+ elapsed_sec = time.time() - start_time
+ if elapsed_sec > self._recv_timeout_sec:
+ raise socket.timeout
+ chars = ''.join([self._buffer.popleft() for i in range(n)])
+ # We choose to use latin1 to remain consistent with
+ # handle_read() and give back the same data as the user would
+ # receive if they were reading directly from the
+ # socket w/o our intervention.
+ return chars.encode("latin1")
+
+ def set_blocking(self):
+ """Maintain compatibility with socket API"""
+ pass
+
+ def settimeout(self, seconds):
+ """Set current timeout on recv"""
+ self._recv_timeout_sec = seconds
diff --git a/python/qemu/machine.py b/python/qemu/machine.py
index 041c615052e4..c25f0b42cf60 100644
--- a/python/qemu/machine.py
+++ b/python/qemu/machine.py
@@ -26,6 +26,7 @@ import socket
import tempfile
from typing import Optional, Type
from types import TracebackType
+from qemu.console_socket import ConsoleSocket
from . import qmp
@@ -75,7 +76,8 @@ class QEMUMachine:
def __init__(self, binary, args=None, wrapper=None, name=None,
test_dir="/var/tmp", monitor_address=None,
- socket_scm_helper=None, sock_dir=None):
+ socket_scm_helper=None, sock_dir=None,
+ drain_console=False, console_log=None):
'''
Initialize a QEMUMachine
@@ -86,6 +88,9 @@ class QEMUMachine:
@param test_dir: where to create socket and log file
@param monitor_address: address for QMP monitor
@param socket_scm_helper: helper program, required for send_fd_scm()
+ @param sock_dir: where to create socket (overrides test_dir for sock)
+ @param console_log: (optional) path to console log file
+ @param drain_console: (optional) True to drain console socket to buffer
@note: Qemu process is not started until launch() is used.
'''
if args is None:
@@ -122,6 +127,12 @@ class QEMUMachine:
self._console_address = None
self._console_socket = None
self._remove_files = []
+ self._console_log_path = console_log
+ if self._console_log_path:
+ # In order to log the console, buffering needs to be enabled.
+ self._drain_console = True
+ else:
+ self._drain_console = drain_console
def __enter__(self):
return self
@@ -580,7 +591,11 @@ class QEMUMachine:
Returns a socket connected to the console
"""
if self._console_socket is None:
- self._console_socket = socket.socket(socket.AF_UNIX,
- socket.SOCK_STREAM)
- self._console_socket.connect(self._console_address)
+ if self._drain_console:
+ self._console_socket = ConsoleSocket(self._console_address,
+ file=self._console_log_path)
+ else:
+ self._console_socket = socket.socket(socket.AF_UNIX,
+ socket.SOCK_STREAM)
+ self._console_socket.connect(self._console_address)
return self._console_socket
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* Re: [PULL 10/41] python/qemu: Add ConsoleSocket for optional use in QEMUMachine
2020-07-07 7:08 ` [PULL 10/41] python/qemu: Add ConsoleSocket for optional use in QEMUMachine Alex Bennée
@ 2020-07-10 19:20 ` John Snow
2020-07-11 16:15 ` Robert Foley
0 siblings, 1 reply; 56+ messages in thread
From: John Snow @ 2020-07-10 19:20 UTC (permalink / raw)
To: Alex Bennée, peter.maydell
Cc: Robert Foley, qemu-devel, Cleber Rosa, Peter Puhov,
Philippe Mathieu-Daudé, Eduardo Habkost
On 7/7/20 3:08 AM, Alex Bennée wrote:
> From: Robert Foley <robert.foley@linaro.org>
>
Hi, this creates some pylint regressions, can they please be addressed
first?
> We add the ConsoleSocket object, which has a socket interface
> and which will consume all arriving characters on the
> socket, placing them into an in memory buffer.
> This will also provide those chars via recv() as
> would a regular socket.
> ConsoleSocket also has the option of dumping
> the console bytes to a log file.
>
> We also give QEMUMachine the option of using ConsoleSocket
> to drain and to use for logging console to a file.
> By default QEMUMachine does not use ConsoleSocket.
>
> This is added in preparation for use by basevm.py in a later commit.
> This is a workaround we found was needed for basevm.py since
> there is a known issue where QEMU will hang waiting
> for console characters to be consumed.
>
> Cc: Eduardo Habkost <ehabkost@redhat.com>
> Cc: Cleber Rosa <crosa@redhat.com>
> Signed-off-by: Robert Foley <robert.foley@linaro.org>
> Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
> Acked-by: Alex Bennée <alex.bennee@linaro.org>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Message-Id: <20200601211421.1277-9-robert.foley@linaro.org>
> Message-Id: <20200701135652.1366-13-alex.bennee@linaro.org>
>
> diff --git a/python/qemu/console_socket.py b/python/qemu/console_socket.py
> new file mode 100644
> index 000000000000..830cb7c62825
> --- /dev/null
> +++ b/python/qemu/console_socket.py
> @@ -0,0 +1,110 @@
> +#!/usr/bin/env python3
> +#
> +# This python module implements a ConsoleSocket object which is
> +# designed always drain the socket itself, and place
> +# the bytes into a in memory buffer for later processing.
> +#
> +# Optionally a file path can be passed in and we will also
> +# dump the characters to this file for debug.
> +#
Convert to a module docstring, please.
> +# Copyright 2020 Linaro
> +#
> +# Authors:
> +# Robert Foley <robert.foley@linaro.org>
> +#
> +# This code is licensed under the GPL version 2 or later. See
> +# the COPYING file in the top-level directory.
> +#
> +import asyncore
> +import socket
> +import threading
vvv
> +import io
> +import os
> +import sys
^^^ unused, remove
> +from collections import deque
> +import time
> +import traceback
> +
Add one more blank line here, for flake8.
> +class ConsoleSocket(asyncore.dispatcher):
> +
> + def __init__(self, address, file=None):
> + self._recv_timeout_sec = 300
> + self._buffer = deque()
> + self._asyncore_thread = None
> + self._sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
> + self._sock.connect(address)
> + self._logfile = None
> + if file:
> + self._logfile = open(file, "w")
> + asyncore.dispatcher.__init__(self, sock=self._sock)
> + self._open = True
> + self._thread_start()
> +
> + def _thread_start(self):
> + """Kick off a thread to wait on the asyncore.loop"""
> + if self._asyncore_thread is not None:
> + return
> + self._asyncore_thread = threading.Thread(target=asyncore.loop,
> + kwargs={'timeout':1})
Add a space after the colon here.
> + self._asyncore_thread.daemon = True
> + self._asyncore_thread.start()
> +
> + def handle_close(self):
> + """redirect close to base class"""
> + # Call the base class close, but not self.close() since
> + # handle_close() occurs in the context of the thread which
> + # self.close() attempts to join.
> + asyncore.dispatcher.close(self)
> +
> + def close(self):
> + """Close the base object and wait for the thread to terminate"""
> + if self._open:
> + self._open = False
> + asyncore.dispatcher.close(self)
> + if self._asyncore_thread is not None:
> + thread, self._asyncore_thread = self._asyncore_thread, None
> + thread.join()
> + if self._logfile:
> + self._logfile.close()
> + self._logfile = None
> +
> + def handle_read(self):
> + """process arriving characters into in memory _buffer"""
> + try:
> + data = asyncore.dispatcher.recv(self, 1)
> + # latin1 is needed since there are some chars
> + # we are receiving that cannot be encoded to utf-8
> + # such as 0xe2, 0x80, 0xA6.
> + string = data.decode("latin1")
> + except:
> + print("Exception seen.")
> + traceback.print_exc()
> + return
Please, no bare exceptions unless you re-raise the error.
If you want to handle the error, please handle the error in the caller
and not the shared library code.
As it is, I have no idea what errors you saw that might have warranted
this exclusion.
> + if self._logfile:
> + self._logfile.write("{}".format(string))
> + self._logfile.flush()
> + for c in string:
> + self._buffer.extend(c)
> +
Pylint complains about the usage of 'c' here, but that's okay. Please
amend pylintrc to allow this usage by amending the "good-names" section.
> + def recv(self, n=1, sleep_delay_s=0.1):
> + """Return chars from in memory buffer"""
> + start_time = time.time()
> + while len(self._buffer) < n:
> + time.sleep(sleep_delay_s)
> + elapsed_sec = time.time() - start_time
> + if elapsed_sec > self._recv_timeout_sec:
> + raise socket.timeout
> + chars = ''.join([self._buffer.popleft() for i in range(n)])
> + # We choose to use latin1 to remain consistent with
> + # handle_read() and give back the same data as the user would
> + # receive if they were reading directly from the
> + # socket w/o our intervention.
> + return chars.encode("latin1")
> +
console_socket.py:89:4: W0221: Parameters differ from overridden 'recv'
method (arguments-differ)
Seems pretty different from the asyncore.dispatcher recv method, is that
intentional?
https://github.com/python/cpython/blob/master/Lib/asyncore.py
Does overriding this way break any other methods that we expect to work?
> + def set_blocking(self):
> + """Maintain compatibility with socket API"""
> + pass
> +
You can remove the pass statement here because the docstring fulfills
the role of providing a function body.
> + def settimeout(self, seconds):
> + """Set current timeout on recv"""
> + self._recv_timeout_sec = seconds
> diff --git a/python/qemu/machine.py b/python/qemu/machine.py
> index 041c615052e4..c25f0b42cf60 100644
> --- a/python/qemu/machine.py
> +++ b/python/qemu/machine.py
> @@ -26,6 +26,7 @@ import socket
> import tempfile
> from typing import Optional, Type
> from types import TracebackType
> +from qemu.console_socket import ConsoleSocket
>
Match the import style for other relative imports in the module, as below.
> from . import qmp
>
> @@ -75,7 +76,8 @@ class QEMUMachine:
>
> def __init__(self, binary, args=None, wrapper=None, name=None,
> test_dir="/var/tmp", monitor_address=None,
> - socket_scm_helper=None, sock_dir=None):
> + socket_scm_helper=None, sock_dir=None,
> + drain_console=False, console_log=None):
> '''
> Initialize a QEMUMachine
>
> @@ -86,6 +88,9 @@ class QEMUMachine:
> @param test_dir: where to create socket and log file
> @param monitor_address: address for QMP monitor
> @param socket_scm_helper: helper program, required for send_fd_scm()
> + @param sock_dir: where to create socket (overrides test_dir for sock)
> + @param console_log: (optional) path to console log file
> + @param drain_console: (optional) True to drain console socket to buffer
> @note: Qemu process is not started until launch() is used.
> '''
> if args is None:
> @@ -122,6 +127,12 @@ class QEMUMachine:
> self._console_address = None
> self._console_socket = None
> self._remove_files = []
> + self._console_log_path = console_log
> + if self._console_log_path:
> + # In order to log the console, buffering needs to be enabled.
> + self._drain_console = True
> + else:
> + self._drain_console = drain_console
>
> def __enter__(self):
> return self
> @@ -580,7 +591,11 @@ class QEMUMachine:
> Returns a socket connected to the console
> """
> if self._console_socket is None:
> - self._console_socket = socket.socket(socket.AF_UNIX,
> - socket.SOCK_STREAM)
> - self._console_socket.connect(self._console_address)
> + if self._drain_console:
> + self._console_socket = ConsoleSocket(self._console_address,
> + file=self._console_log_path)
Needs one more space, but the line is already too long as-is.
> + else:
> + self._console_socket = socket.socket(socket.AF_UNIX,
> + socket.SOCK_STREAM)
> + self._console_socket.connect(self._console_address)
> return self._console_socket
>
This makes the typing for _console_socket really tough ... but
technically not a regression as the mypy code isn't merged yet.
--js
^ permalink raw reply [flat|nested] 56+ messages in thread* Re: [PULL 10/41] python/qemu: Add ConsoleSocket for optional use in QEMUMachine
2020-07-10 19:20 ` John Snow
@ 2020-07-11 16:15 ` Robert Foley
2020-07-11 17:45 ` Alex Bennée
2020-07-13 13:57 ` John Snow
0 siblings, 2 replies; 56+ messages in thread
From: Robert Foley @ 2020-07-11 16:15 UTC (permalink / raw)
To: John Snow
Cc: Peter Maydell, Eduardo Habkost, Philippe Mathieu-Daudé,
QEMU Developers, Cleber Rosa, Peter Puhov, Alex Bennée
Hi,
Thanks for the detailed feedback! I will look at making these changes.
On Fri, 10 Jul 2020 at 15:20, John Snow <jsnow@redhat.com> wrote:
>
>
>
> On 7/7/20 3:08 AM, Alex Bennée wrote:
> > From: Robert Foley <robert.foley@linaro.org>
> >
>
<snip>
> > + def recv(self, n=1, sleep_delay_s=0.1):
> > + """Return chars from in memory buffer"""
> > + start_time = time.time()
> > + while len(self._buffer) < n:
> > + time.sleep(sleep_delay_s)
> > + elapsed_sec = time.time() - start_time
> > + if elapsed_sec > self._recv_timeout_sec:
> > + raise socket.timeout
> > + chars = ''.join([self._buffer.popleft() for i in range(n)])
> > + # We choose to use latin1 to remain consistent with
> > + # handle_read() and give back the same data as the user would
> > + # receive if they were reading directly from the
> > + # socket w/o our intervention.
> > + return chars.encode("latin1")
> > +
>
> console_socket.py:89:4: W0221: Parameters differ from overridden 'recv'
> method (arguments-differ)
>
> Seems pretty different from the asyncore.dispatcher recv method, is that
> intentional?
The intention is that the API be the same as asyncore.dispatcher recv.
The sleep_delay_s can be removed, and n is the same as buffer_size in
asyncore.dispatcher recv. Will plan to rename n -> buffer_size.
> https://github.com/python/cpython/blob/master/Lib/asyncore.py
>
<snip>
> > def __enter__(self):
> > return self
> > @@ -580,7 +591,11 @@ class QEMUMachine:
> > Returns a socket connected to the console
> > """
> > if self._console_socket is None:
> > - self._console_socket = socket.socket(socket.AF_UNIX,
> > - socket.SOCK_STREAM)
> > - self._console_socket.connect(self._console_address)
> > + if self._drain_console:
> > + self._console_socket = ConsoleSocket(self._console_address,
> > + file=self._console_log_path)
>
> Needs one more space, but the line is already too long as-is.
>
> > + else:
> > + self._console_socket = socket.socket(socket.AF_UNIX,
> > + socket.SOCK_STREAM)
> > + self._console_socket.connect(self._console_address)
> > return self._console_socket
> >
>
> This makes the typing for _console_socket really tough ... but
> technically not a regression as the mypy code isn't merged yet.
From the comment on mypy, I understand that we need to return a
constant type?
One option to provide a constant type is to simply always return
ConsoleSocket here.
A few changes would be needed inside of ConsoleSocket,
but essentially ConsoleSocket would handle the detail
of draining the console (or not), and thus eliminate this
if/else above reducing it to something like this:
self._console_socket = ConsoleSocket(self._console_address,
file=self._console_log_path,
drain=self._drain_console)
How does this sound?
Thanks & Regards,
-Rob
>
> --js
>
^ permalink raw reply [flat|nested] 56+ messages in thread* Re: [PULL 10/41] python/qemu: Add ConsoleSocket for optional use in QEMUMachine
2020-07-11 16:15 ` Robert Foley
@ 2020-07-11 17:45 ` Alex Bennée
2020-07-13 13:57 ` John Snow
1 sibling, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-11 17:45 UTC (permalink / raw)
To: Robert Foley
Cc: Peter Maydell, Eduardo Habkost, Philippe Mathieu-Daudé,
QEMU Developers, Cleber Rosa, Peter Puhov, John Snow
Robert Foley <robert.foley@linaro.org> writes:
> Hi,
> Thanks for the detailed feedback! I will look at making these
> changes.
In the interest of getting the CI green I've submitted v2 as is but I'll
roll up Robert's cleanups in my rc0 series (which is hopefully a lot
smaller!).
--
Alex Bennée
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PULL 10/41] python/qemu: Add ConsoleSocket for optional use in QEMUMachine
2020-07-11 16:15 ` Robert Foley
2020-07-11 17:45 ` Alex Bennée
@ 2020-07-13 13:57 ` John Snow
2020-07-13 14:16 ` Philippe Mathieu-Daudé
1 sibling, 1 reply; 56+ messages in thread
From: John Snow @ 2020-07-13 13:57 UTC (permalink / raw)
To: Robert Foley
Cc: Peter Maydell, Eduardo Habkost, Philippe Mathieu-Daudé,
QEMU Developers, Cleber Rosa, Peter Puhov, Alex Bennée
On 7/11/20 12:15 PM, Robert Foley wrote:
> Hi,
> Thanks for the detailed feedback! I will look at making these changes.
>
Sorry that it came so late ...
> On Fri, 10 Jul 2020 at 15:20, John Snow <jsnow@redhat.com> wrote:
>>
>>
>>
>> On 7/7/20 3:08 AM, Alex Bennée wrote:
>>> From: Robert Foley <robert.foley@linaro.org>
>>>
>>
> <snip>
>>> + def recv(self, n=1, sleep_delay_s=0.1):
>>> + """Return chars from in memory buffer"""
>>> + start_time = time.time()
>>> + while len(self._buffer) < n:
>>> + time.sleep(sleep_delay_s)
>>> + elapsed_sec = time.time() - start_time
>>> + if elapsed_sec > self._recv_timeout_sec:
>>> + raise socket.timeout
>>> + chars = ''.join([self._buffer.popleft() for i in range(n)])
>>> + # We choose to use latin1 to remain consistent with
>>> + # handle_read() and give back the same data as the user would
>>> + # receive if they were reading directly from the
>>> + # socket w/o our intervention.
>>> + return chars.encode("latin1")
>>> +
>>
>> console_socket.py:89:4: W0221: Parameters differ from overridden 'recv'
>> method (arguments-differ)
>>
>> Seems pretty different from the asyncore.dispatcher recv method, is that
>> intentional?
>
> The intention is that the API be the same as asyncore.dispatcher recv.
> The sleep_delay_s can be removed, and n is the same as buffer_size in
> asyncore.dispatcher recv. Will plan to rename n -> buffer_size.
>
>> https://github.com/python/cpython/blob/master/Lib/asyncore.py
>>
> <snip>
>>> def __enter__(self):
>>> return self
>>> @@ -580,7 +591,11 @@ class QEMUMachine:
>>> Returns a socket connected to the console
>>> """
>>> if self._console_socket is None:
>>> - self._console_socket = socket.socket(socket.AF_UNIX,
>>> - socket.SOCK_STREAM)
>>> - self._console_socket.connect(self._console_address)
>>> + if self._drain_console:
>>> + self._console_socket = ConsoleSocket(self._console_address,
>>> + file=self._console_log_path)
>>
>> Needs one more space, but the line is already too long as-is.
>>
>>> + else:
>>> + self._console_socket = socket.socket(socket.AF_UNIX,
>>> + socket.SOCK_STREAM)
>>> + self._console_socket.connect(self._console_address)
>>> return self._console_socket
>>>
>>
>> This makes the typing for _console_socket really tough ... but
>> technically not a regression as the mypy code isn't merged yet.
>
> From the comment on mypy, I understand that we need to return a
> constant type?
>
It keeps the API simpler to do that, yeah.
> One option to provide a constant type is to simply always return
> ConsoleSocket here.
>
> A few changes would be needed inside of ConsoleSocket,
> but essentially ConsoleSocket would handle the detail
> of draining the console (or not), and thus eliminate this
> if/else above reducing it to something like this:
>
> self._console_socket = ConsoleSocket(self._console_address,
> file=self._console_log_path,
> drain=self._drain_console)
>
> How does this sound?
>
> Thanks & Regards,
> -Rob
>
That would be one way, but I'm not sure how hard it will be because
other clients in the acceptance tests use the socket.makefile() routine
-- does that work for the asyncore object?
The other way would be to offer a .drain_console() style routine that
takes the existing console socket object, wraps it in the asyncore
dispatcher, and returns a new object with its own type and behaviors.
It looks like asyncore is deprecated already, so isolating it into its
own method would make it a bit easier to replace in the future, I'd think.
(I was working on prototyping something for you, but hadn't worked on it
much over the weekend!)
Thanks,
--js
^ permalink raw reply [flat|nested] 56+ messages in thread* Re: [PULL 10/41] python/qemu: Add ConsoleSocket for optional use in QEMUMachine
2020-07-13 13:57 ` John Snow
@ 2020-07-13 14:16 ` Philippe Mathieu-Daudé
2020-07-13 14:37 ` Eduardo Habkost
0 siblings, 1 reply; 56+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-07-13 14:16 UTC (permalink / raw)
To: John Snow, Robert Foley
Cc: Peter Maydell, Eduardo Habkost, QEMU Developers, Cleber Rosa,
Peter Puhov, Alex Bennée
On 7/13/20 3:57 PM, John Snow wrote:
> On 7/11/20 12:15 PM, Robert Foley wrote:
>> Hi,
>> Thanks for the detailed feedback! I will look at making these changes.
>>
>
> Sorry that it came so late ...
I was looking for the patch that makes the python-next series rebase
to fail and now I see your comments :(
So we lost the race. I'll see what can still be merged.
Sorry it took so long due to the Avocado tests failing :(
OTOH I think it is time to declare the Python scripts need more
maintainers because we can't keep up. There are various scripts
and tests written in Python that missed the 5.1 freeze.
Cleber/Eduardo what do you think (about getting more maintainers
involved)?
Phil.
>
>> On Fri, 10 Jul 2020 at 15:20, John Snow <jsnow@redhat.com> wrote:
>>>
>>>
>>>
>>> On 7/7/20 3:08 AM, Alex Bennée wrote:
>>>> From: Robert Foley <robert.foley@linaro.org>
>>>>
>>>
>> <snip>
>>>> + def recv(self, n=1, sleep_delay_s=0.1):
>>>> + """Return chars from in memory buffer"""
>>>> + start_time = time.time()
>>>> + while len(self._buffer) < n:
>>>> + time.sleep(sleep_delay_s)
>>>> + elapsed_sec = time.time() - start_time
>>>> + if elapsed_sec > self._recv_timeout_sec:
>>>> + raise socket.timeout
>>>> + chars = ''.join([self._buffer.popleft() for i in range(n)])
>>>> + # We choose to use latin1 to remain consistent with
>>>> + # handle_read() and give back the same data as the user would
>>>> + # receive if they were reading directly from the
>>>> + # socket w/o our intervention.
>>>> + return chars.encode("latin1")
>>>> +
>>>
>>> console_socket.py:89:4: W0221: Parameters differ from overridden 'recv'
>>> method (arguments-differ)
>>>
>>> Seems pretty different from the asyncore.dispatcher recv method, is that
>>> intentional?
>>
>> The intention is that the API be the same as asyncore.dispatcher recv.
>> The sleep_delay_s can be removed, and n is the same as buffer_size in
>> asyncore.dispatcher recv. Will plan to rename n -> buffer_size.
>>
>>> https://github.com/python/cpython/blob/master/Lib/asyncore.py
>>>
>> <snip>
>>>> def __enter__(self):
>>>> return self
>>>> @@ -580,7 +591,11 @@ class QEMUMachine:
>>>> Returns a socket connected to the console
>>>> """
>>>> if self._console_socket is None:
>>>> - self._console_socket = socket.socket(socket.AF_UNIX,
>>>> - socket.SOCK_STREAM)
>>>> - self._console_socket.connect(self._console_address)
>>>> + if self._drain_console:
>>>> + self._console_socket = ConsoleSocket(self._console_address,
>>>> + file=self._console_log_path)
>>>
>>> Needs one more space, but the line is already too long as-is.
>>>
>>>> + else:
>>>> + self._console_socket = socket.socket(socket.AF_UNIX,
>>>> + socket.SOCK_STREAM)
>>>> + self._console_socket.connect(self._console_address)
>>>> return self._console_socket
>>>>
>>>
>>> This makes the typing for _console_socket really tough ... but
>>> technically not a regression as the mypy code isn't merged yet.
>>
>> From the comment on mypy, I understand that we need to return a
>> constant type?
>>
>
> It keeps the API simpler to do that, yeah.
>
>> One option to provide a constant type is to simply always return
>> ConsoleSocket here.
>>
>> A few changes would be needed inside of ConsoleSocket,
>> but essentially ConsoleSocket would handle the detail
>> of draining the console (or not), and thus eliminate this
>> if/else above reducing it to something like this:
>>
>> self._console_socket = ConsoleSocket(self._console_address,
>> file=self._console_log_path,
>> drain=self._drain_console)
>>
>> How does this sound?
>>
>> Thanks & Regards,
>> -Rob
>>
>
> That would be one way, but I'm not sure how hard it will be because
> other clients in the acceptance tests use the socket.makefile() routine
> -- does that work for the asyncore object?
>
> The other way would be to offer a .drain_console() style routine that
> takes the existing console socket object, wraps it in the asyncore
> dispatcher, and returns a new object with its own type and behaviors.
>
> It looks like asyncore is deprecated already, so isolating it into its
> own method would make it a bit easier to replace in the future, I'd think.
>
> (I was working on prototyping something for you, but hadn't worked on it
> much over the weekend!)
>
> Thanks,
> --js
>
^ permalink raw reply [flat|nested] 56+ messages in thread* Re: [PULL 10/41] python/qemu: Add ConsoleSocket for optional use in QEMUMachine
2020-07-13 14:16 ` Philippe Mathieu-Daudé
@ 2020-07-13 14:37 ` Eduardo Habkost
0 siblings, 0 replies; 56+ messages in thread
From: Eduardo Habkost @ 2020-07-13 14:37 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Robert Foley, John Snow, QEMU Developers,
Cleber Rosa, Peter Puhov, Alex Bennée
On Mon, Jul 13, 2020 at 04:16:50PM +0200, Philippe Mathieu-Daudé wrote:
> On 7/13/20 3:57 PM, John Snow wrote:
> > On 7/11/20 12:15 PM, Robert Foley wrote:
> >> Hi,
> >> Thanks for the detailed feedback! I will look at making these changes.
> >>
> >
> > Sorry that it came so late ...
>
> I was looking for the patch that makes the python-next series rebase
> to fail and now I see your comments :(
>
> So we lost the race. I'll see what can still be merged.
>
> Sorry it took so long due to the Avocado tests failing :(
>
> OTOH I think it is time to declare the Python scripts need more
> maintainers because we can't keep up. There are various scripts
> and tests written in Python that missed the 5.1 freeze.
>
> Cleber/Eduardo what do you think (about getting more maintainers
> involved)?
I agree. I am not being able to keep up and dedicate the time
required to be a good maintainer for the parts I maintain.
My suggestion would be to not have maintainers for "Python
scripts" in general, but having actual maintainers for specific
parts (python/*, tests/vm, tests/migration, scripts/tracetool,
scripts/qapi, etc).
--
Eduardo
^ permalink raw reply [flat|nested] 56+ messages in thread
* [PULL 11/41] tests/vm: Add workaround to consume console
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (9 preceding siblings ...)
2020-07-07 7:08 ` [PULL 10/41] python/qemu: Add ConsoleSocket for optional use in QEMUMachine Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 12/41] tests/vm: switch from optsparse to argparse Alex Bennée
` (31 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Robert Foley, Alex Bennée, qemu-devel,
Peter Puhov, Philippe Mathieu-Daudé
From: Robert Foley <robert.foley@linaro.org>
This adds support to basevm.py so that we always
drain the console chars. This makes use of
support added in an earlier commit that allows
QEMUMachine to use the ConsoleSocket.
This is a workaround we found was needed since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
We also added the option of logging the console to a file.
LOG_CONSOLE=1 will now log the output to a file.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-10-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-14-alex.bennee@linaro.org>
diff --git a/tests/vm/Makefile.include b/tests/vm/Makefile.include
index 39f918a430a5..f21948c46a52 100644
--- a/tests/vm/Makefile.include
+++ b/tests/vm/Makefile.include
@@ -49,6 +49,7 @@ endif
@echo ' EXTRA_CONFIGURE_OPTS="..."'
@echo " J=[0..9]* - Override the -jN parameter for make commands"
@echo " DEBUG=1 - Enable verbose output on host and interactive debugging"
+ @echo " LOG_CONSOLE=1 - Log console to file in: ~/.cache/qemu-vm "
@echo " V=1 - Enable verbose ouput on host and guest commands"
@echo " QEMU_LOCAL=1 - Use QEMU binary local to this build."
@echo " QEMU=/path/to/qemu - Change path to QEMU binary"
@@ -75,6 +76,7 @@ $(IMAGES_DIR)/%.img: $(SRC_PATH)/tests/vm/% \
$(if $(GENISOIMAGE),--genisoimage $(GENISOIMAGE)) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
$(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
+ $(if $(LOG_CONSOLE),--log-console) \
--image "$@" \
--force \
--build-image $@, \
@@ -91,6 +93,7 @@ vm-build-%: $(IMAGES_DIR)/%.img
$(if $(V),--verbose) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
$(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
+ $(if $(LOG_CONSOLE),--log-console) \
--image "$<" \
$(if $(BUILD_TARGET),--build-target $(BUILD_TARGET)) \
--snapshot \
@@ -114,6 +117,7 @@ vm-boot-ssh-%: $(IMAGES_DIR)/%.img
$(if $(V)$(DEBUG), --debug) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
$(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
+ $(if $(LOG_CONSOLE),--log-console) \
--image "$<" \
--interactive \
false, \
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index f716798b405e..04d083409a5f 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -117,6 +117,11 @@ class BaseVM(object):
"w").write(self._config['ssh_pub_key'])
self.debug = args.debug
+ self._console_log_path = None
+ if args.log_console:
+ self._console_log_path = \
+ os.path.join(os.path.expanduser("~/.cache/qemu-vm"),
+ "{}.install.log".format(self.name))
self._stderr = sys.stderr
self._devnull = open(os.devnull, "w")
if self.debug:
@@ -271,7 +276,13 @@ class BaseVM(object):
args += self._data_args + extra_args + self._config['extra_args']
logging.debug("QEMU args: %s", " ".join(args))
qemu_path = get_qemu_path(self.arch, self._build_path)
- guest = QEMUMachine(binary=qemu_path, args=args)
+
+ # Since console_log_path is only set when the user provides the
+ # log_console option, we will set drain_console=True so the
+ # console is always drained.
+ guest = QEMUMachine(binary=qemu_path, args=args,
+ console_log=self._console_log_path,
+ drain_console=True)
guest.set_machine(self._config['machine'])
guest.set_console()
try:
@@ -285,6 +296,8 @@ class BaseVM(object):
raise
atexit.register(self.shutdown)
self._guest = guest
+ # Init console so we can start consuming the chars.
+ self.console_init()
usernet_info = guest.qmp("human-monitor-command",
command_line="info usernet")
self.ssh_port = None
@@ -296,7 +309,9 @@ class BaseVM(object):
raise Exception("Cannot find ssh port from 'info usernet':\n%s" % \
usernet_info)
- def console_init(self, timeout = 120):
+ def console_init(self, timeout = None):
+ if timeout == None:
+ timeout = self.socket_timeout
vm = self._guest
vm.console_socket.settimeout(timeout)
self.console_raw_path = os.path.join(vm._temp_dir,
@@ -578,6 +593,8 @@ def parse_args(vmcls):
parser.add_option("--efi-aarch64",
default="/usr/share/qemu-efi-aarch64/QEMU_EFI.fd",
help="Path to efi image for aarch64 VMs.")
+ parser.add_option("--log-console", action="store_true",
+ help="Log console to file.")
parser.disable_interspersed_args()
return parser.parse_args()
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 12/41] tests/vm: switch from optsparse to argparse
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (10 preceding siblings ...)
2020-07-07 7:08 ` [PULL 11/41] tests/vm: Add workaround to consume console Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 13/41] tests/vm: allow us to take advantage of MTTCG Alex Bennée
` (30 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Daniel P . Berrangé, Robert Foley,
Alex Bennée, qemu-devel, Philippe Mathieu-Daudé
optparse has been deprecated since version 3.2 and argparse is the
blessed replacement. Take the opportunity to enhance our help output
showing defaults when called.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200701135652.1366-15-alex.bennee@linaro.org>
diff --git a/tests/vm/aarch64vm.py b/tests/vm/aarch64vm.py
index bb04cb19c911..d70ab843b6b8 100644
--- a/tests/vm/aarch64vm.py
+++ b/tests/vm/aarch64vm.py
@@ -46,7 +46,7 @@ def get_config_defaults(vmcls, default_config):
def aarch_get_config_defaults(vmcls):
"""Set the defaults for current version of QEMU."""
config = CURRENT_CONFIG
- args, argv = basevm.parse_args(vmcls)
+ args = basevm.parse_args(vmcls)
qemu_path = basevm.get_qemu_path(vmcls.arch, args.build_path)
qemu_version = basevm.get_qemu_version(qemu_path)
if qemu_version < QEMU_AARCH64_MIN_VERSION:
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index 04d083409a5f..890bbc5549a6 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -23,7 +23,7 @@ from qemu.accel import kvm_available
from qemu.machine import QEMUMachine
import subprocess
import hashlib
-import optparse
+import argparse
import atexit
import tempfile
import shutil
@@ -556,54 +556,57 @@ def parse_args(vmcls):
else:
return 1
- parser = optparse.OptionParser(
- description="VM test utility. Exit codes: "
- "0 = success, "
- "1 = command line error, "
- "2 = environment initialization failed, "
- "3 = test command failed")
- parser.add_option("--debug", "-D", action="store_true",
- help="enable debug output")
- parser.add_option("--image", "-i", default="%s.img" % vmcls.name,
- help="image file name")
- parser.add_option("--force", "-f", action="store_true",
- help="force build image even if image exists")
- parser.add_option("--jobs", type=int, default=get_default_jobs(),
- help="number of virtual CPUs")
- parser.add_option("--verbose", "-V", action="store_true",
- help="Pass V=1 to builds within the guest")
- parser.add_option("--build-image", "-b", action="store_true",
- help="build image")
- parser.add_option("--build-qemu",
- help="build QEMU from source in guest")
- parser.add_option("--build-target",
- help="QEMU build target", default="check")
- parser.add_option("--build-path", default=None,
- help="Path of build directory, "\
- "for using build tree QEMU binary. ")
- parser.add_option("--interactive", "-I", action="store_true",
- help="Interactively run command")
- parser.add_option("--snapshot", "-s", action="store_true",
- help="run tests with a snapshot")
- parser.add_option("--genisoimage", default="genisoimage",
- help="iso imaging tool")
- parser.add_option("--config", "-c", default=None,
- help="Provide config yaml for configuration. "\
- "See config_example.yaml for example.")
- parser.add_option("--efi-aarch64",
- default="/usr/share/qemu-efi-aarch64/QEMU_EFI.fd",
- help="Path to efi image for aarch64 VMs.")
- parser.add_option("--log-console", action="store_true",
- help="Log console to file.")
- parser.disable_interspersed_args()
+ parser = argparse.ArgumentParser(
+ formatter_class=argparse.ArgumentDefaultsHelpFormatter,
+ description="Utility for provisioning VMs and running builds",
+ epilog="""Remaining arguments are passed to the command.
+ Exit codes: 0 = success, 1 = command line error,
+ 2 = environment initialization failed,
+ 3 = test command failed""")
+ parser.add_argument("--debug", "-D", action="store_true",
+ help="enable debug output")
+ parser.add_argument("--image", "-i", default="%s.img" % vmcls.name,
+ help="image file name")
+ parser.add_argument("--force", "-f", action="store_true",
+ help="force build image even if image exists")
+ parser.add_argument("--jobs", type=int, default=get_default_jobs(),
+ help="number of virtual CPUs")
+ parser.add_argument("--verbose", "-V", action="store_true",
+ help="Pass V=1 to builds within the guest")
+ parser.add_argument("--build-image", "-b", action="store_true",
+ help="build image")
+ parser.add_argument("--build-qemu",
+ help="build QEMU from source in guest")
+ parser.add_argument("--build-target",
+ help="QEMU build target", default="check")
+ parser.add_argument("--build-path", default=None,
+ help="Path of build directory, "\
+ "for using build tree QEMU binary. ")
+ parser.add_argument("--interactive", "-I", action="store_true",
+ help="Interactively run command")
+ parser.add_argument("--snapshot", "-s", action="store_true",
+ help="run tests with a snapshot")
+ parser.add_argument("--genisoimage", default="genisoimage",
+ help="iso imaging tool")
+ parser.add_argument("--config", "-c", default=None,
+ help="Provide config yaml for configuration. "\
+ "See config_example.yaml for example.")
+ parser.add_argument("--efi-aarch64",
+ default="/usr/share/qemu-efi-aarch64/QEMU_EFI.fd",
+ help="Path to efi image for aarch64 VMs.")
+ parser.add_argument("--log-console", action="store_true",
+ help="Log console to file.")
+ parser.add_argument("commands", nargs="*", help="""Remaining
+ commands after -- are passed to command inside the VM""")
+
return parser.parse_args()
def main(vmcls, config=None):
try:
if config == None:
config = {}
- args, argv = parse_args(vmcls)
- if not argv and not args.build_qemu and not args.build_image:
+ args = parse_args(vmcls)
+ if not args.commands and not args.build_qemu and not args.build_image:
print("Nothing to do?")
return 1
config = parse_config(config, args)
@@ -619,12 +622,12 @@ def main(vmcls, config=None):
if args.build_qemu:
vm.add_source_dir(args.build_qemu)
cmd = [vm.BUILD_SCRIPT.format(
- configure_opts = " ".join(argv),
+ configure_opts = " ".join(args.commands),
jobs=int(args.jobs),
target=args.build_target,
verbose = "V=1" if args.verbose else "")]
else:
- cmd = argv
+ cmd = args.commands
img = args.image
if args.snapshot:
img += ",snapshot=on"
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 13/41] tests/vm: allow us to take advantage of MTTCG
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (11 preceding siblings ...)
2020-07-07 7:08 ` [PULL 12/41] tests/vm: switch from optsparse to argparse Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 14/41] tests/docker: check for an parameters not empty string Alex Bennée
` (29 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Philippe Mathieu-Daudé, Alex Bennée,
qemu-devel, Robert Foley
We currently limit TCG guests to -smp 1 but now we have added some
aarch64 guests we can do better when running on x86_64 hardware.
Raise the limit for TCG guests when it is safe to do so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-16-alex.bennee@linaro.org>
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index 890bbc5549a6..21f46d1957d9 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -551,8 +551,15 @@ def parse_config(config, args):
def parse_args(vmcls):
def get_default_jobs():
- if kvm_available(vmcls.arch):
- return multiprocessing.cpu_count() // 2
+ if multiprocessing.cpu_count() > 1:
+ if kvm_available(vmcls.arch):
+ return multiprocessing.cpu_count() // 2
+ elif os.uname().machine == "x86_64" and \
+ vmcls.arch in ["aarch64", "x86_64", "i386"]:
+ # MTTCG is available on these arches and we can allow
+ # more cores. but only up to a reasonable limit. User
+ # can always override these limits with --jobs.
+ return min(multiprocessing.cpu_count() // 2, 8)
else:
return 1
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 14/41] tests/docker: check for an parameters not empty string
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (12 preceding siblings ...)
2020-07-07 7:08 ` [PULL 13/41] tests/vm: allow us to take advantage of MTTCG Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 15/41] tests/docker: change tag naming scheme of our images Alex Bennée
` (28 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Philippe Mathieu-Daudé, Alex Bennée,
qemu-devel
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-17-alex.bennee@linaro.org>
diff --git a/tests/docker/common.rc b/tests/docker/common.rc
index 02cd67a8c5e8..ebc5b97ecf91 100755
--- a/tests/docker/common.rc
+++ b/tests/docker/common.rc
@@ -47,7 +47,7 @@ build_qemu()
check_qemu()
{
# default to make check unless the caller specifies
- if test -z "$@"; then
+ if [ $# = 0 ]; then
INVOCATION="check"
else
INVOCATION="$@"
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 15/41] tests/docker: change tag naming scheme of our images
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (13 preceding siblings ...)
2020-07-07 7:08 ` [PULL 14/41] tests/docker: check for an parameters not empty string Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 16/41] .gitignore: un-ignore .gitlab-ci.d Alex Bennée
` (27 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Daniel P . Berrangé, Alex Bennée, qemu-devel,
Philippe Mathieu-Daudé
We've been misusing the tag naming scheme for some time by overloading
the post : section with the image type. Really it should be saved for
the revision of that particular build. Move the details to the other
side so we have:
qemu/image-name
with the implied :latest version added by the tooling.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-18-alex.bennee@linaro.org>
diff --git a/.shippable.yml b/.shippable.yml
index 2cce7b568905..81905727d14c 100644
--- a/.shippable.yml
+++ b/.shippable.yml
@@ -29,8 +29,8 @@ build:
pre_ci:
- make docker-image-${IMAGE} V=1
pre_ci_boot:
- image_name: qemu
- image_tag: ${IMAGE}
+ image_name: qemu/${IMAGE}
+ image_tag: latest
pull: false
options: "-e HOME=/root"
ci:
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 3e3617816ec6..e23b4af20ea6 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -50,12 +50,12 @@ docker-image: ${DOCKER_TARGETS}
ifdef SKIP_DOCKER_BUILD
docker-image-%: $(DOCKER_FILES_DIR)/%.docker
$(call quiet-command, \
- $(DOCKER_SCRIPT) check --quiet qemu:$* $<, \
+ $(DOCKER_SCRIPT) check --quiet qemu/$* $<, \
"CHECK", "$*")
else
docker-image-%: $(DOCKER_FILES_DIR)/%.docker
$(call quiet-command,\
- $(DOCKER_SCRIPT) build -t qemu:$* -f $< \
+ $(DOCKER_SCRIPT) build -t qemu/$* -f $< \
$(if $V,,--quiet) $(if $(NOCACHE),--no-cache) \
$(if $(NOUSER),,--add-current-user) \
$(if $(EXTRA_FILES),--extra-files $(EXTRA_FILES))\
@@ -75,14 +75,14 @@ docker-binfmt-image-debian-%: $(DOCKER_FILES_DIR)/debian-bootstrap.docker
DEB_ARCH=$(DEB_ARCH) \
DEB_TYPE=$(DEB_TYPE) \
$(if $(DEB_URL),DEB_URL=$(DEB_URL),) \
- $(DOCKER_SCRIPT) build qemu:debian-$* $< \
+ $(DOCKER_SCRIPT) build qemu/debian-$* $< \
$(if $V,,--quiet) $(if $(NOCACHE),--no-cache) \
$(if $(NOUSER),,--add-current-user) \
$(if $(EXTRA_FILES),--extra-files $(EXTRA_FILES)) \
$(if $(EXECUTABLE),--include-executable=$(EXECUTABLE)), \
"BUILD","binfmt debian-$* (debootstrapped)"), \
$(call quiet-command, \
- $(DOCKER_SCRIPT) check --quiet qemu:debian-$* $< || \
+ $(DOCKER_SCRIPT) check --quiet qemu/debian-$* $< || \
{ echo "You will need to build $(EXECUTABLE)"; exit 1;},\
"CHECK", "debian-$* exists"))
@@ -258,7 +258,7 @@ docker-run: docker-qemu-src
docker-run-%: CMD = $(shell echo '$@' | sed -e 's/docker-run-\([^@]*\)@\(.*\)/\1/')
docker-run-%: IMAGE = $(shell echo '$@' | sed -e 's/docker-run-\([^@]*\)@\(.*\)/\2/')
docker-run-%:
- @$(MAKE) docker-run TEST=$(CMD) IMAGE=qemu:$(IMAGE)
+ @$(MAKE) docker-run TEST=$(CMD) IMAGE=qemu/$(IMAGE)
docker-clean:
$(call quiet-command, $(DOCKER_SCRIPT) clean)
diff --git a/tests/docker/docker.py b/tests/docker/docker.py
index e630aae10897..cc6f76caa602 100755
--- a/tests/docker/docker.py
+++ b/tests/docker/docker.py
@@ -204,7 +204,7 @@ def _dockerfile_preprocess(df):
for l in df.splitlines():
if len(l.strip()) == 0 or l.startswith("#"):
continue
- from_pref = "FROM qemu:"
+ from_pref = "FROM qemu/"
if l.startswith(from_pref):
# TODO: Alternatively we could replace this line with "FROM $ID"
# where $ID is the image's hex id obtained with
diff --git a/tests/docker/dockerfiles/debian-alpha-cross.docker b/tests/docker/dockerfiles/debian-alpha-cross.docker
index 74bcabfdb12b..10fe30df0dd1 100644
--- a/tests/docker/dockerfiles/debian-alpha-cross.docker
+++ b/tests/docker/dockerfiles/debian-alpha-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-amd64-cross.docker b/tests/docker/dockerfiles/debian-amd64-cross.docker
index 5d8904192519..870109ef6afe 100644
--- a/tests/docker/dockerfiles/debian-amd64-cross.docker
+++ b/tests/docker/dockerfiles/debian-amd64-cross.docker
@@ -4,7 +4,7 @@
# This docker target is used on non-x86_64 machines which need the
# x86_64 cross compilers installed.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Alex Bennée <alex.bennee@linaro.org>
# Add the foreign architecture we want and install dependencies
diff --git a/tests/docker/dockerfiles/debian-amd64.docker b/tests/docker/dockerfiles/debian-amd64.docker
index 957f0bc2e79b..8fdfd6a6b046 100644
--- a/tests/docker/dockerfiles/debian-amd64.docker
+++ b/tests/docker/dockerfiles/debian-amd64.docker
@@ -4,7 +4,7 @@
# This docker target builds on the debian Stretch base image. Further
# libraries which are not widely available are installed by hand.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
RUN apt update && \
diff --git a/tests/docker/dockerfiles/debian-arm64-cross.docker b/tests/docker/dockerfiles/debian-arm64-cross.docker
index 09ca0a1ba797..166e24df138c 100644
--- a/tests/docker/dockerfiles/debian-arm64-cross.docker
+++ b/tests/docker/dockerfiles/debian-arm64-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
# Add the foreign architecture we want and install dependencies
RUN dpkg --add-architecture arm64
diff --git a/tests/docker/dockerfiles/debian-arm64-test-cross.docker b/tests/docker/dockerfiles/debian-arm64-test-cross.docker
index a44e76d94211..53a9012beb8a 100644
--- a/tests/docker/dockerfiles/debian-arm64-test-cross.docker
+++ b/tests/docker/dockerfiles/debian-arm64-test-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Bullseye base image.
#
-FROM qemu:debian11
+FROM qemu/debian11
# Add the foreign architecture we want and install dependencies
RUN dpkg --add-architecture arm64
diff --git a/tests/docker/dockerfiles/debian-armel-cross.docker b/tests/docker/dockerfiles/debian-armel-cross.docker
index e3794a61c959..b7b1a3585f8d 100644
--- a/tests/docker/dockerfiles/debian-armel-cross.docker
+++ b/tests/docker/dockerfiles/debian-armel-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
# Add the foreign architecture we want and install dependencies
diff --git a/tests/docker/dockerfiles/debian-armhf-cross.docker b/tests/docker/dockerfiles/debian-armhf-cross.docker
index e163b8b95699..25d76188337f 100644
--- a/tests/docker/dockerfiles/debian-armhf-cross.docker
+++ b/tests/docker/dockerfiles/debian-armhf-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
# Add the foreign architecture we want and install dependencies
RUN dpkg --add-architecture armhf
diff --git a/tests/docker/dockerfiles/debian-hppa-cross.docker b/tests/docker/dockerfiles/debian-hppa-cross.docker
index 5c68b2d3304a..3d6c65a3efcf 100644
--- a/tests/docker/dockerfiles/debian-hppa-cross.docker
+++ b/tests/docker/dockerfiles/debian-hppa-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-m68k-cross.docker b/tests/docker/dockerfiles/debian-m68k-cross.docker
index 25edc80e9a3d..fcb10e353475 100644
--- a/tests/docker/dockerfiles/debian-m68k-cross.docker
+++ b/tests/docker/dockerfiles/debian-m68k-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-mips-cross.docker b/tests/docker/dockerfiles/debian-mips-cross.docker
index 08a8e1c29cca..26c154014db2 100644
--- a/tests/docker/dockerfiles/debian-mips-cross.docker
+++ b/tests/docker/dockerfiles/debian-mips-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian-mips64-cross.docker b/tests/docker/dockerfiles/debian-mips64-cross.docker
index 1a79505d696a..09c2ba584e51 100644
--- a/tests/docker/dockerfiles/debian-mips64-cross.docker
+++ b/tests/docker/dockerfiles/debian-mips64-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-mips64el-cross.docker b/tests/docker/dockerfiles/debian-mips64el-cross.docker
index 453b53ef72c8..c990b683b7a1 100644
--- a/tests/docker/dockerfiles/debian-mips64el-cross.docker
+++ b/tests/docker/dockerfiles/debian-mips64el-cross.docker
@@ -4,7 +4,7 @@
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian-mipsel-cross.docker b/tests/docker/dockerfiles/debian-mipsel-cross.docker
index 3b6e975c686d..0e5dd42d3c4b 100644
--- a/tests/docker/dockerfiles/debian-mipsel-cross.docker
+++ b/tests/docker/dockerfiles/debian-mipsel-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian-powerpc-cross.docker b/tests/docker/dockerfiles/debian-powerpc-cross.docker
index 89dd4fbf8708..07e1789650b7 100644
--- a/tests/docker/dockerfiles/debian-powerpc-cross.docker
+++ b/tests/docker/dockerfiles/debian-powerpc-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-ppc64-cross.docker b/tests/docker/dockerfiles/debian-ppc64-cross.docker
index 4bf88ab02dd0..8efe68874ed6 100644
--- a/tests/docker/dockerfiles/debian-ppc64-cross.docker
+++ b/tests/docker/dockerfiles/debian-ppc64-cross.docker
@@ -2,7 +2,7 @@
# Docker ppc64 cross-compiler target
#
# This docker target builds on the debian Buster base image.
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-ppc64el-cross.docker b/tests/docker/dockerfiles/debian-ppc64el-cross.docker
index cd386f01d93c..1146a06be625 100644
--- a/tests/docker/dockerfiles/debian-ppc64el-cross.docker
+++ b/tests/docker/dockerfiles/debian-ppc64el-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
# Add the foreign architecture we want and install dependencies
RUN dpkg --add-architecture ppc64el && \
diff --git a/tests/docker/dockerfiles/debian-riscv64-cross.docker b/tests/docker/dockerfiles/debian-riscv64-cross.docker
index 5e2d6ddb6004..2bbff19772a3 100644
--- a/tests/docker/dockerfiles/debian-riscv64-cross.docker
+++ b/tests/docker/dockerfiles/debian-riscv64-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-s390x-cross.docker b/tests/docker/dockerfiles/debian-s390x-cross.docker
index 43fe59836f25..9f2ab51eb09a 100644
--- a/tests/docker/dockerfiles/debian-s390x-cross.docker
+++ b/tests/docker/dockerfiles/debian-s390x-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
# Add the s390x architecture
RUN dpkg --add-architecture s390x
diff --git a/tests/docker/dockerfiles/debian-sh4-cross.docker b/tests/docker/dockerfiles/debian-sh4-cross.docker
index 9d7663764e4d..fd3af8957596 100644
--- a/tests/docker/dockerfiles/debian-sh4-cross.docker
+++ b/tests/docker/dockerfiles/debian-sh4-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-sparc64-cross.docker b/tests/docker/dockerfiles/debian-sparc64-cross.docker
index 31fd34f120b2..f4bb9b561cfa 100644
--- a/tests/docker/dockerfiles/debian-sparc64-cross.docker
+++ b/tests/docker/dockerfiles/debian-sparc64-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-tricore-cross.docker b/tests/docker/dockerfiles/debian-tricore-cross.docker
index 4a0f7706a39a..769d95c77bb2 100644
--- a/tests/docker/dockerfiles/debian-tricore-cross.docker
+++ b/tests/docker/dockerfiles/debian-tricore-cross.docker
@@ -7,7 +7,7 @@
#
# SPDX-License-Identifier: GPL-2.0-or-later
#
-FROM qemu:debian9
+FROM qemu/debian9
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian-win32-cross.docker b/tests/docker/dockerfiles/debian-win32-cross.docker
index d16d6431bc8b..b045e821b910 100644
--- a/tests/docker/dockerfiles/debian-win32-cross.docker
+++ b/tests/docker/dockerfiles/debian-win32-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch MXE base image.
#
-FROM qemu:debian9-mxe
+FROM qemu/debian9-mxe
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian-win64-cross.docker b/tests/docker/dockerfiles/debian-win64-cross.docker
index b0bc960445b7..2fc9cfcbc663 100644
--- a/tests/docker/dockerfiles/debian-win64-cross.docker
+++ b/tests/docker/dockerfiles/debian-win64-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch MXE base image.
#
-FROM qemu:debian9-mxe
+FROM qemu/debian9-mxe
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian9-mxe.docker b/tests/docker/dockerfiles/debian9-mxe.docker
index 62ff1cecf2d2..ae2c222a6f08 100644
--- a/tests/docker/dockerfiles/debian9-mxe.docker
+++ b/tests/docker/dockerfiles/debian9-mxe.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian9
+FROM qemu/debian9
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/tcg/Makefile.qemu b/tests/tcg/Makefile.qemu
index 9c23aeaa2a64..f8ad4c47be69 100644
--- a/tests/tcg/Makefile.qemu
+++ b/tests/tcg/Makefile.qemu
@@ -47,7 +47,7 @@ ifneq ($(DOCKER_IMAGE),)
DOCKER_COMPILE_CMD="$(DOCKER_SCRIPT) cc \
--cc $(DOCKER_CROSS_CC_GUEST) \
- -i qemu:$(DOCKER_IMAGE) \
+ -i qemu/$(DOCKER_IMAGE) \
-s $(SRC_PATH) -- "
.PHONY: docker-build-guest-tests
@@ -57,7 +57,7 @@ docker-build-guest-tests: docker-image-$(DOCKER_IMAGE)
$(MAKE) -f $(TCG_MAKE) TARGET="$(TARGET)" CC=$(DOCKER_COMPILE_CMD) \
SRC_PATH="$(SRC_PATH)" BUILD_STATIC=y \
EXTRA_CFLAGS="$(CROSS_CC_GUEST_CFLAGS)"), \
- "BUILD","$(TARGET) guest-tests with docker qemu:$(DOCKER_IMAGE)")
+ "BUILD","$(TARGET) guest-tests with docker qemu/$(DOCKER_IMAGE)")
GUEST_BUILD=docker-build-guest-tests
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 16/41] .gitignore: un-ignore .gitlab-ci.d
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (14 preceding siblings ...)
2020-07-07 7:08 ` [PULL 15/41] tests/docker: change tag naming scheme of our images Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 17/41] gitlab-ci: Fix the change rules after moving the YML files Alex Bennée
` (26 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Philippe Mathieu-Daudé, Thomas Huth, Alex Bennée,
qemu-devel
The sooner we deprecate in-tree builds the sooner this mess of regexes
can be thrown away.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-19-alex.bennee@linaro.org>
diff --git a/.gitignore b/.gitignore
index 90acb4347d46..2992d15931ac 100644
--- a/.gitignore
+++ b/.gitignore
@@ -93,6 +93,7 @@
*.tp
*.vr
*.d
+!/.gitlab-ci.d
!/scripts/qemu-guest-agent/fsfreeze-hook.d
*.o
.sdk
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 17/41] gitlab-ci: Fix the change rules after moving the YML files
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (15 preceding siblings ...)
2020-07-07 7:08 ` [PULL 16/41] .gitignore: un-ignore .gitlab-ci.d Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 18/41] gitlab: introduce explicit "container" and "build" stages Alex Bennée
` (25 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Alex Bennée, Thomas Huth, Philippe Mathieu-Daudé,
qemu-devel, Laszlo Ersek
From: Thomas Huth <thuth@redhat.com>
The edk2.yml and opensbi.yml files have recently been moved/renamed,
but the change has not been reflected in the rules in the YML files
yet.
Fixes: 922febe2af ("Move edk2 and opensbi YAML files to .gitlab-ci.d folder")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200625151627.24986-1-thuth@redhat.com>
Message-Id: <20200701135652.1366-20-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/edk2.yml b/.gitlab-ci.d/edk2.yml
index 088ba4b43a33..a9990b71475f 100644
--- a/.gitlab-ci.d/edk2.yml
+++ b/.gitlab-ci.d/edk2.yml
@@ -2,7 +2,7 @@ docker-edk2:
stage: build
rules: # Only run this job when the Dockerfile is modified
- changes:
- - .gitlab-ci-edk2.yml
+ - .gitlab-ci.d/edk2.yml
- .gitlab-ci.d/edk2/Dockerfile
when: always
image: docker:19.03.1
diff --git a/.gitlab-ci.d/opensbi.yml b/.gitlab-ci.d/opensbi.yml
index dd051c01245d..6a1750784ac1 100644
--- a/.gitlab-ci.d/opensbi.yml
+++ b/.gitlab-ci.d/opensbi.yml
@@ -2,7 +2,7 @@ docker-opensbi:
stage: build
rules: # Only run this job when the Dockerfile is modified
- changes:
- - .gitlab-ci-opensbi.yml
+ - .gitlab-ci.d/opensbi.yml
- .gitlab-ci.d/opensbi/Dockerfile
when: always
image: docker:19.03.1
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 18/41] gitlab: introduce explicit "container" and "build" stages
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (16 preceding siblings ...)
2020-07-07 7:08 ` [PULL 17/41] gitlab-ci: Fix the change rules after moving the YML files Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 19/41] gitlab: build all container images during CI Alex Bennée
` (24 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Thomas Huth, Daniel P. Berrangé, Laszlo Ersek, qemu-devel,
Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
Alex Bennée
From: Daniel P. Berrangé <berrange@redhat.com>
If no stage is listed, jobs get put in an implicit "test" stage.
Some jobs which create container images to be used by later stages
are currently listed as in a "build" stages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622153318.751107-2-berrange@redhat.com>
Message-Id: <20200701135652.1366-21-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/edk2.yml b/.gitlab-ci.d/edk2.yml
index a9990b71475f..e1e045241661 100644
--- a/.gitlab-ci.d/edk2.yml
+++ b/.gitlab-ci.d/edk2.yml
@@ -1,5 +1,5 @@
docker-edk2:
- stage: build
+ stage: containers
rules: # Only run this job when the Dockerfile is modified
- changes:
- .gitlab-ci.d/edk2.yml
@@ -24,6 +24,7 @@ docker-edk2:
- docker push $IMAGE_TAG
build-edk2:
+ stage: build
rules: # Only run this job when ...
- changes: # ... roms/edk2/ is modified (submodule updated)
- roms/edk2/*
diff --git a/.gitlab-ci.d/opensbi.yml b/.gitlab-ci.d/opensbi.yml
index 6a1750784ac1..62088ec5ec1b 100644
--- a/.gitlab-ci.d/opensbi.yml
+++ b/.gitlab-ci.d/opensbi.yml
@@ -1,5 +1,5 @@
docker-opensbi:
- stage: build
+ stage: containers
rules: # Only run this job when the Dockerfile is modified
- changes:
- .gitlab-ci.d/opensbi.yml
@@ -24,6 +24,7 @@ docker-opensbi:
- docker push $IMAGE_TAG
build-opensbi:
+ stage: build
rules: # Only run this job when ...
- changes: # ... roms/opensbi/ is modified (submodule updated)
- roms/opensbi/*
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 349c77aa580e..9fdc752ea636 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -1,3 +1,7 @@
+stages:
+ - containers
+ - build
+
include:
- local: '/.gitlab-ci.d/edk2.yml'
- local: '/.gitlab-ci.d/opensbi.yml'
@@ -17,6 +21,7 @@ include:
- JOBS=$(expr $(nproc) + 1)
build-system1:
+ stage: build
image: ubuntu:19.10
<<: *before_script_apt
script:
@@ -31,6 +36,7 @@ build-system1:
- make -j"$JOBS" check
build-system2:
+ stage: build
image: fedora:latest
<<: *before_script_dnf
script:
@@ -46,6 +52,7 @@ build-system2:
- make -j"$JOBS" check
build-disabled:
+ stage: build
image: fedora:latest
<<: *before_script_dnf
script:
@@ -62,6 +69,7 @@ build-disabled:
- make -j"$JOBS" check-qtest SPEED=slow
build-tcg-disabled:
+ stage: build
image: centos:8
<<: *before_script_dnf
script:
@@ -82,6 +90,7 @@ build-tcg-disabled:
260 261 262 263 264 270 272 273 277 279
build-user:
+ stage: build
<<: *before_script_apt
script:
- mkdir build
@@ -92,6 +101,7 @@ build-user:
- make run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
build-clang:
+ stage: build
image: fedora:latest
<<: *before_script_dnf
script:
@@ -106,6 +116,7 @@ build-clang:
- make -j"$JOBS" check
build-tci:
+ stage: build
image: centos:8
<<: *before_script_dnf
script:
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 19/41] gitlab: build all container images during CI
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (17 preceding siblings ...)
2020-07-07 7:08 ` [PULL 18/41] gitlab: introduce explicit "container" and "build" stages Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 20/41] gitlab: convert jobs to use custom built containers Alex Bennée
` (23 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Thomas Huth, Daniel P. Berrangé, Philippe Mathieu-Daudé,
qemu-devel, Wainer dos Santos Moschetta, Alex Bennée
From: Daniel P. Berrangé <berrange@redhat.com>
We have a number of container images in tests/docker/dockerfiles
that are intended to provide well defined environments for doing
test builds. We want our CI system to use these containers too.
This introduces builds of all of them as the first stage in the
CI, so that the built containers are available for later build
jobs. The containers are setup to use the GitLab container
registry as the cache, so we only pay the penalty of the full
build when the dockerfiles change. The main qemu-project/qemu
repo is used as a second cache, so that users forking QEMU will
see a fast turnaround time on their CI jobs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200622153318.751107-3-berrange@redhat.com>
[AJB: tweak the tag format]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-22-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
new file mode 100644
index 000000000000..2afd01f1d179
--- /dev/null
+++ b/.gitlab-ci.d/containers.yml
@@ -0,0 +1,245 @@
+.container_job_template: &container_job_definition
+ image: docker:stable
+ stage: containers
+ services:
+ - docker:dind
+ before_script:
+ - export TAG="$CI_REGISTRY_IMAGE/qemu/$NAME:latest"
+ - export COMMON_TAG="$CI_REGISTRY/qemu-project/qemu/$NAME:latest"
+ - docker info
+ - docker login registry.gitlab.com -u "$CI_REGISTRY_USER" -p "$CI_REGISTRY_PASSWORD"
+ script:
+ - docker pull "$TAG" || docker pull "$COMMON_TAG" || true
+ - sed -i -e "s,FROM qemu/,FROM $CI_REGISTRY_IMAGE/qemu/," tests/docker/dockerfiles/$NAME.docker
+ - docker build --cache-from "$TAG" --cache-from "$COMMON_TAG" --tag "$TAG" -f "tests/docker/dockerfiles/$NAME.docker" tests/docker/dockerfiles
+ - docker push "$TAG"
+ after_script:
+ - docker logout
+
+amd64-centos7-container:
+ <<: *container_job_definition
+ variables:
+ NAME: centos7
+
+amd64-centos8-container:
+ <<: *container_job_definition
+ variables:
+ NAME: centos8
+
+amd64-debian10-container:
+ <<: *container_job_definition
+ variables:
+ NAME: debian10
+
+amd64-debian11-container:
+ <<: *container_job_definition
+ variables:
+ NAME: debian11
+
+amd64-debian9-container:
+ <<: *container_job_definition
+ variables:
+ NAME: debian9
+
+amd64-debian9-mxe-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian9-container']
+ variables:
+ NAME: debian9-mxe
+
+alpha-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-alpha-cross
+
+amd64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-amd64-cross
+
+amd64-debian-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-amd64
+
+arm64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-arm64-cross
+
+arm64-test-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian11-container']
+ variables:
+ NAME: debian-arm64-test-cross
+
+armel-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-armel-cross
+
+armhf-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-armhf-cross
+
+hppa-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-hppa-cross
+
+m68k-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-m68k-cross
+
+mips64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-mips64-cross
+
+mips64el-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-mips64el-cross
+
+mips-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-mips-cross
+
+mipsel-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-mipsel-cross
+
+powerpc-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-powerpc-cross
+
+ppc64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-ppc64-cross
+
+ppc64el-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-ppc64el-cross
+
+riscv64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-riscv64-cross
+
+s390x-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-s390x-cross
+
+sh4-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-sh4-cross
+
+sparc64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-sparc64-cross
+
+tricore-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian9-container']
+ variables:
+ NAME: debian-tricore-cross
+
+win32-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer3
+ needs: ['amd64-debian9-mxe-container']
+ variables:
+ NAME: debian-win32-cross
+
+win64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer3
+ needs: ['amd64-debian9-mxe-container']
+ variables:
+ NAME: debian-win64-cross
+
+xtensa-debian-cross-container:
+ <<: *container_job_definition
+ variables:
+ NAME: debian-xtensa-cross
+
+cris-fedora-cross-container:
+ <<: *container_job_definition
+ variables:
+ NAME: fedora-cris-cross
+
+amd64-fedora-container:
+ <<: *container_job_definition
+ variables:
+ NAME: fedora
+
+i386-fedora-cross-container:
+ <<: *container_job_definition
+ variables:
+ NAME: fedora-i386-cross
+
+amd64-ubuntu1804-container:
+ <<: *container_job_definition
+ variables:
+ NAME: ubuntu1804
+
+amd64-ubuntu2004-container:
+ <<: *container_job_definition
+ variables:
+ NAME: ubuntu2004
+
+amd64-ubuntu-container:
+ <<: *container_job_definition
+ variables:
+ NAME: ubuntu
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 9fdc752ea636..72d688875fd7 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -1,10 +1,13 @@
stages:
- containers
+ - containers-layer2
+ - containers-layer3
- build
include:
- local: '/.gitlab-ci.d/edk2.yml'
- local: '/.gitlab-ci.d/opensbi.yml'
+ - local: '/.gitlab-ci.d/containers.yml'
.update_apt_template: &before_script_apt
before_script:
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 20/41] gitlab: convert jobs to use custom built containers
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (18 preceding siblings ...)
2020-07-07 7:08 ` [PULL 19/41] gitlab: build all container images during CI Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 21/41] gitlab: build containers with buildkit and metadata Alex Bennée
` (22 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Thomas Huth, Daniel P. Berrangé, Philippe Mathieu-Daudé,
qemu-devel, Wainer dos Santos Moschetta, Alex Bennée
From: Daniel P. Berrangé <berrange@redhat.com>
Now that we're building standard container images from
dockerfiles in tests/docker/dockerfiles, we can convert
the build jobs to use them. The key benefit of this is
that a contributor can now more easily replicate the CI
environment on their local machine. The container images
are cached too, so we are not spending time waiting for
the apt-get/dnf package installs to complete.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200622153318.751107-4-berrange@redhat.com>
[AJB: tweak naming convention]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-23-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 72d688875fd7..a7abc55a5c6a 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -9,133 +9,108 @@ include:
- local: '/.gitlab-ci.d/opensbi.yml'
- local: '/.gitlab-ci.d/containers.yml'
-.update_apt_template: &before_script_apt
- before_script:
- - apt-get update -qq
- - apt-get install -y -qq git gcc libglib2.0-dev libpixman-1-dev make
- genisoimage
- - JOBS=$(expr $(nproc) + 1)
-
-.update_dnf_template: &before_script_dnf
- before_script:
- - dnf update -y
- - dnf install -y bzip2 diffutils gcc git genisoimage findutils glib2-devel
- make python3 perl-podlators perl-Test-Harness pixman-devel zlib-devel
- - JOBS=$(expr $(nproc) + 1)
+.native_build_job_template: &native_build_job_definition
+ stage: build
+ image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
+ before_script:
+ - JOBS=$(expr $(nproc) + 1)
+ script:
+ - mkdir build
+ - cd build
+ - if test -n "$TARGETS";
+ then
+ ../configure --enable-werror $CONFIGURE_ARGS --target-list="$TARGETS" ;
+ else
+ ../configure --enable-werror $CONFIGURE_ARGS ;
+ fi
+ - make -j"$JOBS"
+ - make -j"$JOBS" $MAKE_CHECK_ARGS
build-system1:
- stage: build
- image: ubuntu:19.10
- <<: *before_script_apt
- script:
- - apt-get install -y -qq libgtk-3-dev libvte-dev nettle-dev libcacard-dev
- libusb-dev libvde-dev libspice-protocol-dev libgl1-mesa-dev libvdeplug-dev
- - mkdir build
- - cd build
- - ../configure --enable-werror --target-list="aarch64-softmmu alpha-softmmu
- cris-softmmu hppa-softmmu lm32-softmmu moxie-softmmu microblazeel-softmmu
- mips64el-softmmu m68k-softmmu ppc-softmmu riscv64-softmmu sparc-softmmu"
- - make -j"$JOBS"
- - make -j"$JOBS" check
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: ubuntu2004
+ TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu lm32-softmmu
+ moxie-softmmu microblazeel-softmmu mips64el-softmmu m68k-softmmu ppc-softmmu
+ riscv64-softmmu sparc-softmmu
+ MAKE_CHECK_ARGS: check
build-system2:
- stage: build
- image: fedora:latest
- <<: *before_script_dnf
- script:
- - yum install -y SDL2-devel libgcrypt-devel brlapi-devel libaio-devel
- libfdt-devel lzo-devel librdmacm-devel libibverbs-devel libibumad-devel
- libzstd-devel
- - mkdir build
- - cd build
- - ../configure --enable-werror --target-list="tricore-softmmu unicore32-softmmu
- microblaze-softmmu mips-softmmu riscv32-softmmu s390x-softmmu sh4-softmmu
- sparc64-softmmu x86_64-softmmu xtensa-softmmu nios2-softmmu or1k-softmmu"
- - make -j"$JOBS"
- - make -j"$JOBS" check
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: fedora
+ TARGETS: tricore-softmmu unicore32-softmmu microblaze-softmmu mips-softmmu
+ riscv32-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu x86_64-softmmu
+ xtensa-softmmu nios2-softmmu or1k-softmmu
+ MAKE_CHECK_ARGS: check
build-disabled:
- stage: build
- image: fedora:latest
- <<: *before_script_dnf
- script:
- - mkdir build
- - cd build
- - ../configure --enable-werror --disable-rdma --disable-slirp --disable-curl
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: fedora
+ CONFIGURE_ARGS: --disable-rdma --disable-slirp --disable-curl
--disable-capstone --disable-live-block-migration --disable-glusterfs
--disable-replication --disable-coroutine-pool --disable-smartcard
--disable-guest-agent --disable-curses --disable-libxml2 --disable-tpm
--disable-qom-cast-debug --disable-spice --disable-vhost-vsock
--disable-vhost-net --disable-vhost-crypto --disable-vhost-user
- --target-list="i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user"
- - make -j"$JOBS"
- - make -j"$JOBS" check-qtest SPEED=slow
+ TARGETS: i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user
+ MAKE_CHECK_ARGS: check-qtest SPEED=slow
build-tcg-disabled:
- stage: build
- image: centos:8
- <<: *before_script_dnf
- script:
- - dnf install -y clang gtk3-devel libusbx-devel libgcrypt-devel
- - mkdir build
- - cd build
- - ../configure --cc=clang --enable-werror --disable-tcg --audio-drv-list=""
- - make -j"$JOBS"
- - make check-unit
- - make check-qapi-schema
- - cd tests/qemu-iotests/
- - ./check -raw 001 002 003 004 005 008 009 010 011 012 021 025 032 033 048
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: centos8
+ script:
+ - mkdir build
+ - cd build
+ - ../configure --disable-tcg --audio-drv-list=""
+ - make -j"$JOBS"
+ - make check-unit
+ - make check-qapi-schema
+ - cd tests/qemu-iotests/
+ - ./check -raw 001 002 003 004 005 008 009 010 011 012 021 025 032 033 048
052 063 077 086 101 104 106 113 148 150 151 152 157 159 160 163
170 171 183 184 192 194 197 208 215 221 222 226 227 236 253 277
- - ./check -qcow2 028 051 056 057 058 065 067 068 082 085 091 095 096 102 122
+ - ./check -qcow2 028 051 056 057 058 065 067 068 082 085 091 095 096 102 122
124 132 139 142 144 145 151 152 155 157 165 194 196 197 200 202
208 209 215 216 218 222 227 234 246 247 248 250 254 255 257 258
260 261 262 263 264 270 272 273 277 279
build-user:
- stage: build
- <<: *before_script_apt
- script:
- - mkdir build
- - cd build
- - ../configure --enable-werror --disable-system --disable-guest-agent
- --disable-capstone --disable-slirp --disable-fdt
- - make -j"$JOBS"
- - make run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: ubuntu2004
+ CONFIGURE_ARGS: --disable-system --disable-guest-agent
+ --disable-capstone --disable-slirp --disable-fdt
+ MAKE_CHECK_ARGS: run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
build-clang:
- stage: build
- image: fedora:latest
- <<: *before_script_dnf
- script:
- - yum install -y clang SDL2-devel libattr-devel libcap-ng-devel xfsprogs-devel
- libiscsi-devel libnfs-devel libseccomp-devel gnutls-devel librbd-devel
- - mkdir build
- - cd build
- - ../configure --cc=clang --cxx=clang++ --enable-werror
- --target-list="alpha-softmmu arm-softmmu m68k-softmmu mips64-softmmu
- ppc-softmmu s390x-softmmu x86_64-softmmu arm-linux-user"
- - make -j"$JOBS"
- - make -j"$JOBS" check
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: fedora
+ CONFIGURE_ARGS: --cc=clang --cxx=clang++
+ TARGETS: alpha-softmmu arm-softmmu m68k-softmmu mips64-softmmu
+ ppc-softmmu s390x-softmmu x86_64-softmmu arm-linux-user
+ MAKE_CHECK_ARGS: check
build-tci:
- stage: build
- image: centos:8
- <<: *before_script_dnf
- script:
- - TARGETS="aarch64 alpha arm hppa m68k microblaze moxie ppc64 s390x x86_64"
- - mkdir build
- - cd build
- - ../configure --enable-tcg-interpreter
- --target-list="$(for tg in $TARGETS; do echo -n ${tg}'-softmmu '; done)"
- - make -j"$JOBS"
- - make run-tcg-tests-x86_64-softmmu
- - make tests/qtest/boot-serial-test tests/qtest/cdrom-test tests/qtest/pxe-test
- - for tg in $TARGETS ; do
- export QTEST_QEMU_BINARY="${tg}-softmmu/qemu-system-${tg}" ;
- ./tests/qtest/boot-serial-test || exit 1 ;
- ./tests/qtest/cdrom-test || exit 1 ;
- done
- - QTEST_QEMU_BINARY="x86_64-softmmu/qemu-system-x86_64" ./tests/qtest/pxe-test
- - QTEST_QEMU_BINARY="s390x-softmmu/qemu-system-s390x"
- ./tests/qtest/pxe-test -m slow
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: fedora
+ script:
+ - TARGETS="aarch64 alpha arm hppa m68k microblaze moxie ppc64 s390x x86_64"
+ - mkdir build
+ - cd build
+ - ../configure --enable-tcg-interpreter
+ --target-list="$(for tg in $TARGETS; do echo -n ${tg}'-softmmu '; done)"
+ - make -j"$JOBS"
+ - make run-tcg-tests-x86_64-softmmu
+ - make tests/qtest/boot-serial-test tests/qtest/cdrom-test tests/qtest/pxe-test
+ - for tg in $TARGETS ; do
+ export QTEST_QEMU_BINARY="${tg}-softmmu/qemu-system-${tg}" ;
+ ./tests/qtest/boot-serial-test || exit 1 ;
+ ./tests/qtest/cdrom-test || exit 1 ;
+ done
+ - QTEST_QEMU_BINARY="x86_64-softmmu/qemu-system-x86_64" ./tests/qtest/pxe-test
+ - QTEST_QEMU_BINARY="s390x-softmmu/qemu-system-s390x" ./tests/qtest/pxe-test -m slow
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 21/41] gitlab: build containers with buildkit and metadata
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (19 preceding siblings ...)
2020-07-07 7:08 ` [PULL 20/41] gitlab: convert jobs to use custom built containers Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 22/41] tests/docker: add --registry support to tooling Alex Bennée
` (21 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell; +Cc: Alex Bennée, qemu-devel
According to the documentation to be able to use --cache-from for
remote registries you need to enable both buildkit and inline the
metadata. We want to do this to support pulling from gitlab when users
build their local docker images.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-24-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index 2afd01f1d179..f353359fd8ba 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -11,7 +11,9 @@
script:
- docker pull "$TAG" || docker pull "$COMMON_TAG" || true
- sed -i -e "s,FROM qemu/,FROM $CI_REGISTRY_IMAGE/qemu/," tests/docker/dockerfiles/$NAME.docker
- - docker build --cache-from "$TAG" --cache-from "$COMMON_TAG" --tag "$TAG" -f "tests/docker/dockerfiles/$NAME.docker" tests/docker/dockerfiles
+ - DOCKER_BUILDKIT=1 docker build --cache-from "$TAG" --cache-from "$COMMON_TAG" --tag "$TAG"
+ --build-arg BUILDKIT_INLINE_CACHE=1
+ -f "tests/docker/dockerfiles/$NAME.docker" tests/docker/dockerfiles
- docker push "$TAG"
after_script:
- docker logout
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 22/41] tests/docker: add --registry support to tooling
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (20 preceding siblings ...)
2020-07-07 7:08 ` [PULL 21/41] gitlab: build containers with buildkit and metadata Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 23/41] tests/docker: add packages needed for check-acceptance Alex Bennée
` (20 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Philippe Mathieu-Daudé, Alex Bennée,
qemu-devel
This allows us to point the tools towards a registry from which they
can grab pre-built layers instead of doing everything from scratch
each time. To enable this we need to be using the DOCKER_BUILDKIT
engine.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-25-alex.bennee@linaro.org>
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index e23b4af20ea6..a26177abc258 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -13,6 +13,7 @@ DOCKER_IMAGES := $(sort $(notdir $(basename $(wildcard $(DOCKER_FILES_DIR)/*.doc
DOCKER_TARGETS := $(patsubst %,docker-image-%,$(DOCKER_IMAGES))
# Use a global constant ccache directory to speed up repetitive builds
DOCKER_CCACHE_DIR := $$HOME/.cache/qemu-docker-ccache
+DOCKER_REGISTRY := $(if $(REGISTRY),$(REGISTRY),registry.gitlab.com/qemu-project/qemu)
DOCKER_TESTS := $(notdir $(shell \
find $(SRC_PATH)/tests/docker/ -name 'test-*' -type f))
@@ -56,7 +57,9 @@ else
docker-image-%: $(DOCKER_FILES_DIR)/%.docker
$(call quiet-command,\
$(DOCKER_SCRIPT) build -t qemu/$* -f $< \
- $(if $V,,--quiet) $(if $(NOCACHE),--no-cache) \
+ $(if $V,,--quiet) \
+ $(if $(NOCACHE),--no-cache, \
+ $(if $(DOCKER_REGISTRY),--registry $(DOCKER_REGISTRY))) \
$(if $(NOUSER),,--add-current-user) \
$(if $(EXTRA_FILES),--extra-files $(EXTRA_FILES))\
$(if $(EXECUTABLE),--include-executable=$(EXECUTABLE)),\
@@ -213,6 +216,7 @@ endif
@echo ' Include extra files in image.'
@echo ' ENGINE=auto/docker/podman'
@echo ' Specify which container engine to run.'
+ @echo ' REGISTRY=url Cache builds from registry (default:$(DOCKER_REGISTRY))'
# This rule if for directly running against an arbitrary docker target.
# It is called by the expanded docker targets (e.g. make
diff --git a/tests/docker/docker.py b/tests/docker/docker.py
index cc6f76caa602..9684f07bdebe 100755
--- a/tests/docker/docker.py
+++ b/tests/docker/docker.py
@@ -221,6 +221,13 @@ class Docker(object):
""" Running Docker commands """
def __init__(self):
self._command = _guess_engine_command()
+
+ if "docker" in self._command and "TRAVIS" not in os.environ:
+ os.environ["DOCKER_BUILDKIT"] = "1"
+ self._buildkit = True
+ else:
+ self._buildkit = False
+
self._instance = None
atexit.register(self._kill_instances)
signal.signal(signal.SIGTERM, self._kill_instances)
@@ -289,10 +296,24 @@ class Docker(object):
return labels.get("com.qemu.dockerfile-checksum", "")
def build_image(self, tag, docker_dir, dockerfile,
- quiet=True, user=False, argv=None, extra_files_cksum=[]):
+ quiet=True, user=False, argv=None, registry=None,
+ extra_files_cksum=[]):
if argv is None:
argv = []
+ # pre-calculate the docker checksum before any
+ # substitutions we make for caching
+ checksum = _text_checksum(_dockerfile_preprocess(dockerfile))
+
+ if registry is not None:
+ dockerfile = dockerfile.replace("FROM qemu/",
+ "FROM %s/qemu/" %
+ (registry))
+ # see if we can fetch a cache copy, may fail...
+ pull_args = ["pull", "%s/%s" % (registry, tag)]
+ self._do(pull_args, quiet=quiet)
+
+
tmp_df = tempfile.NamedTemporaryFile(mode="w+t",
encoding='utf-8',
dir=docker_dir, suffix=".docker")
@@ -306,15 +327,23 @@ class Docker(object):
(uname, uid, uname))
tmp_df.write("\n")
- tmp_df.write("LABEL com.qemu.dockerfile-checksum=%s" %
- _text_checksum(_dockerfile_preprocess(dockerfile)))
+ tmp_df.write("LABEL com.qemu.dockerfile-checksum=%s" % (checksum))
for f, c in extra_files_cksum:
tmp_df.write("LABEL com.qemu.%s-checksum=%s" % (f, c))
tmp_df.flush()
- self._do_check(["build", "-t", tag, "-f", tmp_df.name] + argv +
- [docker_dir],
+ build_args = ["build", "-t", tag, "-f", tmp_df.name]
+ if self._buildkit:
+ build_args += ["--build-arg", "BUILDKIT_INLINE_CACHE=1"]
+
+ if registry is not None:
+ cache = "%s/%s" % (registry, tag)
+ build_args += ["--cache-from", cache]
+ build_args += argv
+ build_args += [docker_dir]
+
+ self._do_check(build_args,
quiet=quiet)
def update_image(self, tag, tarball, quiet=True):
@@ -403,6 +432,8 @@ class BuildCommand(SubCommand):
parser.add_argument("--add-current-user", "-u", dest="user",
action="store_true",
help="Add the current user to image's passwd")
+ parser.add_argument("--registry", "-r",
+ help="cache from docker registry")
parser.add_argument("-t", dest="tag",
help="Image Tag")
parser.add_argument("-f", dest="dockerfile",
@@ -458,7 +489,8 @@ class BuildCommand(SubCommand):
for k, v in os.environ.items()
if k.lower() in FILTERED_ENV_NAMES]
dkr.build_image(tag, docker_dir, dockerfile,
- quiet=args.quiet, user=args.user, argv=argv,
+ quiet=args.quiet, user=args.user,
+ argv=argv, registry=args.registry,
extra_files_cksum=cksum)
rmtree(docker_dir)
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 23/41] tests/docker: add packages needed for check-acceptance
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (21 preceding siblings ...)
2020-07-07 7:08 ` [PULL 22/41] tests/docker: add --registry support to tooling Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 24/41] tests/acceptance: skip s390x_ccw_vrtio_tcg on GitLab Alex Bennée
` (19 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Philippe Mathieu-Daudé, Thomas Huth,
Alex Bennée, qemu-devel
We need additional python packages to run check-acceptance. Add them
to the docker images we will be using later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-26-alex.bennee@linaro.org>
diff --git a/tests/docker/dockerfiles/fedora.docker b/tests/docker/dockerfiles/fedora.docker
index 798ddd2c3e0b..70b6186bd3ea 100644
--- a/tests/docker/dockerfiles/fedora.docker
+++ b/tests/docker/dockerfiles/fedora.docker
@@ -80,7 +80,12 @@ ENV PACKAGES \
pixman-devel \
python3 \
python3-PyYAML \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
python3-sphinx \
+ python3-virtualenv \
rdma-core-devel \
SDL2-devel \
snappy-devel \
@@ -89,6 +94,8 @@ ENV PACKAGES \
systemd-devel \
systemtap-sdt-devel \
tar \
+ tesseract \
+ tesseract-langpack-eng \
texinfo \
usbredir-devel \
virglrenderer-devel \
diff --git a/tests/docker/dockerfiles/ubuntu2004.docker b/tests/docker/dockerfiles/ubuntu2004.docker
index 6050ce7e8a80..f7aac840bf86 100644
--- a/tests/docker/dockerfiles/ubuntu2004.docker
+++ b/tests/docker/dockerfiles/ubuntu2004.docker
@@ -46,9 +46,17 @@ ENV PACKAGES flex bison \
libxen-dev \
libzstd-dev \
make \
- python3-yaml \
+ python3-numpy \
+ python3-opencv \
+ python3-pil \
+ python3-pip \
python3-sphinx \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
sparse \
+ tesseract-ocr \
+ tesseract-ocr-eng \
texinfo \
xfslibs-dev\
vim
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 24/41] tests/acceptance: skip s390x_ccw_vrtio_tcg on GitLab
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (22 preceding siblings ...)
2020-07-07 7:08 ` [PULL 23/41] tests/docker: add packages needed for check-acceptance Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 25/41] tests/acceptance: fix dtb path for machine_rx_gdbsim Alex Bennée
` (18 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Thomas Huth, Alex Bennée, Cornelia Huck, qemu-devel,
Wainer dos Santos Moschetta, open list:S390 general arch...,
Cleber Rosa, Philippe Mathieu-Daudé
Currently the test takes more the 900 seconds on GitLab and then times
out. Running on Travis seems to be OK.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-27-alex.bennee@linaro.org>
diff --git a/tests/acceptance/boot_linux.py b/tests/acceptance/boot_linux.py
index 3aa57e88b0bf..0055dc7cee77 100644
--- a/tests/acceptance/boot_linux.py
+++ b/tests/acceptance/boot_linux.py
@@ -20,6 +20,7 @@ from avocado.utils import network
from avocado.utils import vmimage
from avocado.utils import datadrainer
from avocado.utils.path import find_command
+from avocado import skipIf
ACCEL_NOT_AVAILABLE_FMT = "%s accelerator does not seem to be available"
KVM_NOT_AVAILABLE = ACCEL_NOT_AVAILABLE_FMT % "KVM"
@@ -220,6 +221,7 @@ class BootLinuxS390X(BootLinux):
chksum = '4caaab5a434fd4d1079149a072fdc7891e354f834d355069ca982fdcaf5a122d'
+ @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab')
def test_s390_ccw_virtio_tcg(self):
"""
:avocado: tags=machine:s390-ccw-virtio
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 25/41] tests/acceptance: fix dtb path for machine_rx_gdbsim
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (23 preceding siblings ...)
2020-07-07 7:08 ` [PULL 24/41] tests/acceptance: skip s390x_ccw_vrtio_tcg on GitLab Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 26/41] tests/acceptance: skip multicore mips_malta tests on GitLab Alex Bennée
` (17 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Yoshinori Sato, Alex Bennée, qemu-devel,
Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
Cleber Rosa, Philippe Mathieu-Daudé
The old path doesn't exist but the rx-virt.dtb file has the same
checksum so lets use that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200701135652.1366-28-alex.bennee@linaro.org>
diff --git a/tests/acceptance/machine_rx_gdbsim.py b/tests/acceptance/machine_rx_gdbsim.py
index a44f2c87da0c..bff63e421d54 100644
--- a/tests/acceptance/machine_rx_gdbsim.py
+++ b/tests/acceptance/machine_rx_gdbsim.py
@@ -50,7 +50,7 @@ class RxGdbSimMachine(Test):
:avocado: tags=machine:gdbsim-r5f562n7
:avocado: tags=endian:little
"""
- dtb_url = ('https://acc.dl.osdn.jp/users/23/23887/rx-qemu.dtb')
+ dtb_url = ('https://acc.dl.osdn.jp/users/23/23887/rx-virt.dtb')
dtb_hash = '7b4e4e2c71905da44e86ce47adee2210b026ac18'
dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
kernel_url = ('http://acc.dl.osdn.jp/users/23/23845/zImage')
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 26/41] tests/acceptance: skip multicore mips_malta tests on GitLab
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (24 preceding siblings ...)
2020-07-07 7:08 ` [PULL 25/41] tests/acceptance: fix dtb path for machine_rx_gdbsim Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 27/41] tests/acceptance: skip LinuxInitrd 2gib with v4.16 " Alex Bennée
` (16 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Aleksandar Rikalo, Alex Bennée, qemu-devel,
Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
Aleksandar Markovic, Cleber Rosa, Philippe Mathieu-Daudé,
Aurelien Jarno
For some reason these tests fail all the time on GitLab. I can
re-create the hang around 3% of the time locally but it doesn't seem
to be MTTCG related. For now skipIf on GITLAB_CI.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200701135652.1366-29-alex.bennee@linaro.org>
diff --git a/tests/acceptance/machine_mips_malta.py b/tests/acceptance/machine_mips_malta.py
index 92b4f28a1123..7c9a4ee4d2d6 100644
--- a/tests/acceptance/machine_mips_malta.py
+++ b/tests/acceptance/machine_mips_malta.py
@@ -15,6 +15,7 @@ from avocado import skipUnless
from avocado_qemu import Test
from avocado_qemu import wait_for_console_pattern
from avocado.utils import archive
+from avocado import skipIf
NUMPY_AVAILABLE = True
@@ -99,6 +100,7 @@ class MaltaMachineFramebuffer(Test):
"""
self.do_test_i6400_framebuffer_logo(1)
+ @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab')
def test_mips_malta_i6400_framebuffer_logo_7cores(self):
"""
:avocado: tags=arch:mips64el
@@ -108,6 +110,7 @@ class MaltaMachineFramebuffer(Test):
"""
self.do_test_i6400_framebuffer_logo(7)
+ @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab')
def test_mips_malta_i6400_framebuffer_logo_8cores(self):
"""
:avocado: tags=arch:mips64el
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 27/41] tests/acceptance: skip LinuxInitrd 2gib with v4.16 on GitLab
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (25 preceding siblings ...)
2020-07-07 7:08 ` [PULL 26/41] tests/acceptance: skip multicore mips_malta tests on GitLab Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 28/41] gitlab: add acceptance testing to system builds Alex Bennée
` (15 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Alex Bennée, qemu-devel, Wainer dos Santos Moschetta,
Philippe Mathieu-Daudé, Cleber Rosa,
Philippe Mathieu-Daudé
This fails on GitLab but not when run locally on the same container
image. It's very confusing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200701135652.1366-30-alex.bennee@linaro.org>
diff --git a/tests/acceptance/linux_initrd.py b/tests/acceptance/linux_initrd.py
index a3e54d3fc915..a249e2f14a24 100644
--- a/tests/acceptance/linux_initrd.py
+++ b/tests/acceptance/linux_initrd.py
@@ -8,10 +8,12 @@
# This work is licensed under the terms of the GNU GPL, version 2 or
# later. See the COPYING file in the top-level directory.
+import os
import logging
import tempfile
from avocado_qemu import Test
+from avocado import skipIf
class LinuxInitrd(Test):
@@ -51,6 +53,7 @@ class LinuxInitrd(Test):
max_size + 1)
self.assertRegex(self.vm.get_log(), expected_msg)
+ @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab')
def test_with_2gib_file_should_work_with_linux_v4_16(self):
"""
QEMU has supported up to 4 GiB initrd for recent kernel
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 28/41] gitlab: add acceptance testing to system builds
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (26 preceding siblings ...)
2020-07-07 7:08 ` [PULL 27/41] tests/acceptance: skip LinuxInitrd 2gib with v4.16 " Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-09-08 19:54 ` Philippe Mathieu-Daudé
2020-07-07 7:08 ` [PULL 29/41] tests/tcg: add more default compilers to configure.sh Alex Bennée
` (14 subsequent siblings)
42 siblings, 1 reply; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Thomas Huth, Alex Bennée, qemu-devel,
Wainer dos Santos Moschetta, Pavel Dovgalyuk, Cleber Rosa,
Paolo Bonzini, Philippe Mathieu-Daudé
As part of migrating things from Travis to GitLab add the acceptance
tests. To do this:
- rename system1 to system-ubuntu-main
- rename system2 to system-fedora-misc
- split into build/check/acceptance
- remove -j from check stages
- use artifacts to save build stage
- add post acceptance template and use
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-31-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index a7abc55a5c6a..93baf98232d7 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -1,8 +1,12 @@
+# Currently we have two build stages after our containers are built:
+# - build (for traditional build and test or first stage build)
+# - test (for test stages, using build artefacts from a build stage)
stages:
- containers
- containers-layer2
- containers-layer3
- build
+ - test
include:
- local: '/.gitlab-ci.d/edk2.yml'
@@ -24,26 +28,85 @@ include:
../configure --enable-werror $CONFIGURE_ARGS ;
fi
- make -j"$JOBS"
- - make -j"$JOBS" $MAKE_CHECK_ARGS
+ - if test -n "$MAKE_CHECK_ARGS";
+ then
+ make $MAKE_CHECK_ARGS ;
+ fi
+
+.native_test_job_template: &native_test_job_definition
+ stage: test
+ image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
+ script:
+ - cd build
+ - find . -type f -exec touch {} +
+ - make $MAKE_CHECK_ARGS
+
+.post_acceptance_template: &post_acceptance
+ after_script:
+ - cd build
+ - python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
+ - du -chs $HOME/avocado/data/cache
-build-system1:
+build-system-ubuntu-main:
<<: *native_build_job_definition
variables:
IMAGE: ubuntu2004
TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu lm32-softmmu
moxie-softmmu microblazeel-softmmu mips64el-softmmu m68k-softmmu ppc-softmmu
riscv64-softmmu sparc-softmmu
+ artifacts:
+ paths:
+ - build
+
+check-system-ubuntu-main:
+ <<: *native_test_job_definition
+ needs:
+ - job: build-system-ubuntu-main
+ artifacts: true
+ variables:
+ IMAGE: ubuntu2004
MAKE_CHECK_ARGS: check
-build-system2:
+acceptance-system-ubuntu-main:
+ <<: *native_test_job_definition
+ needs:
+ - job: build-system-ubuntu-main
+ artifacts: true
+ variables:
+ IMAGE: ubuntu2004
+ MAKE_CHECK_ARGS: check-acceptance
+ <<: *post_acceptance
+
+build-system-fedora-alt:
<<: *native_build_job_definition
variables:
IMAGE: fedora
TARGETS: tricore-softmmu unicore32-softmmu microblaze-softmmu mips-softmmu
riscv32-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu x86_64-softmmu
xtensa-softmmu nios2-softmmu or1k-softmmu
+ artifacts:
+ paths:
+ - build
+
+check-system-fedora-alt:
+ <<: *native_test_job_definition
+ needs:
+ - job: build-system-fedora-alt
+ artifacts: true
+ variables:
+ IMAGE: fedora
MAKE_CHECK_ARGS: check
+acceptance-system-fedora-alt:
+ <<: *native_test_job_definition
+ needs:
+ - job: build-system-fedora-alt
+ artifacts: true
+ variables:
+ IMAGE: fedora
+ MAKE_CHECK_ARGS: check-acceptance
+ <<: *post_acceptance
+
build-disabled:
<<: *native_build_job_definition
variables:
diff --git a/.travis.yml b/.travis.yml
index 74158f741b18..c24dfbe377f3 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -289,29 +289,6 @@ jobs:
python: 3.6
- # Acceptance (Functional) tests
- - name: "GCC check-acceptance"
- dist: bionic
- env:
- - CONFIG="--enable-tools --target-list=aarch64-softmmu,alpha-softmmu,arm-softmmu,m68k-softmmu,microblaze-softmmu,mips-softmmu,mips64el-softmmu,nios2-softmmu,or1k-softmmu,ppc-softmmu,ppc64-softmmu,s390x-softmmu,sh4-softmmu,sparc-softmmu,x86_64-softmmu,xtensa-softmmu"
- - TEST_CMD="make check-acceptance"
- - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-acceptance"
- after_script:
- - python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
- - du -chs $HOME/avocado/data/cache
- addons:
- apt:
- packages:
- - python3-pil
- - python3-pip
- - python3-numpy
- - python3-opencv
- - python3-venv
- - rpm2cpio
- - tesseract-ocr
- - tesseract-ocr-eng
-
-
# Using newer GCC with sanitizers
- name: "GCC9 with sanitizers (softmmu)"
addons:
diff --git a/tests/Makefile.include b/tests/Makefile.include
index 3f4448a20bc7..c316e0d66475 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -944,7 +944,7 @@ check-acceptance: check-venv $(TESTS_RESULTS_DIR) get-vm-images
--show=$(AVOCADO_SHOW) run --job-results-dir=$(TESTS_RESULTS_DIR) \
--filter-by-tags-include-empty --filter-by-tags-include-empty-key \
$(AVOCADO_TAGS) \
- --failfast=on tests/acceptance, \
+ $(if $(GITLAB_CI),,--failfast=on) tests/acceptance, \
"AVOCADO", "tests/acceptance")
# Consolidated targets
diff --git a/tests/acceptance/replay_kernel.py b/tests/acceptance/replay_kernel.py
index 60621417ddf0..62d2db8c64be 100644
--- a/tests/acceptance/replay_kernel.py
+++ b/tests/acceptance/replay_kernel.py
@@ -73,7 +73,7 @@ class ReplayKernel(LinuxKernelTest):
logger = logging.getLogger('replay')
logger.info('replay overhead {:.2%}'.format(t2 / t1 - 1))
- @skipIf(os.getenv('CONTINUOUS_INTEGRATION'), 'Running on Travis-CI')
+ @skipIf(os.getenv('GITLAB_CI'), 'Running on GitLab')
def test_x86_64_pc(self):
"""
:avocado: tags=arch:x86_64
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* Re: [PULL 28/41] gitlab: add acceptance testing to system builds
2020-07-07 7:08 ` [PULL 28/41] gitlab: add acceptance testing to system builds Alex Bennée
@ 2020-09-08 19:54 ` Philippe Mathieu-Daudé
2020-09-09 6:03 ` Thomas Huth
0 siblings, 1 reply; 56+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-09-08 19:54 UTC (permalink / raw)
To: Alex Bennée
Cc: Fam Zheng, Peter Maydell, Thomas Huth, QEMU Developers,
Wainer dos Santos Moschetta, Pavel Dovgalyuk, Cleber Rosa,
Paolo Bonzini
On Tue, Jul 7, 2020 at 9:14 AM Alex Bennée <alex.bennee@linaro.org> wrote:
>
> As part of migrating things from Travis to GitLab add the acceptance
> tests. To do this:
>
> - rename system1 to system-ubuntu-main
> - rename system2 to system-fedora-misc
> - split into build/check/acceptance
> - remove -j from check stages
> - use artifacts to save build stage
> - add post acceptance template and use
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Message-Id: <20200701135652.1366-31-alex.bennee@linaro.org>
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index a7abc55a5c6a..93baf98232d7 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -1,8 +1,12 @@
> +# Currently we have two build stages after our containers are built:
> +# - build (for traditional build and test or first stage build)
> +# - test (for test stages, using build artefacts from a build stage)
> stages:
> - containers
> - containers-layer2
> - containers-layer3
> - build
> + - test
>
> include:
> - local: '/.gitlab-ci.d/edk2.yml'
> @@ -24,26 +28,85 @@ include:
> ../configure --enable-werror $CONFIGURE_ARGS ;
> fi
> - make -j"$JOBS"
> - - make -j"$JOBS" $MAKE_CHECK_ARGS
> + - if test -n "$MAKE_CHECK_ARGS";
> + then
> + make $MAKE_CHECK_ARGS ;
> + fi
> +
> +.native_test_job_template: &native_test_job_definition
> + stage: test
> + image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
> + script:
> + - cd build
> + - find . -type f -exec touch {} +
> + - make $MAKE_CHECK_ARGS
> +
> +.post_acceptance_template: &post_acceptance
> + after_script:
> + - cd build
> + - python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
> + - du -chs $HOME/avocado/data/cache
>
> -build-system1:
> +build-system-ubuntu-main:
> <<: *native_build_job_definition
> variables:
> IMAGE: ubuntu2004
> TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu lm32-softmmu
> moxie-softmmu microblazeel-softmmu mips64el-softmmu m68k-softmmu ppc-softmmu
> riscv64-softmmu sparc-softmmu
> + artifacts:
> + paths:
> + - build
> +
> +check-system-ubuntu-main:
> + <<: *native_test_job_definition
> + needs:
> + - job: build-system-ubuntu-main
> + artifacts: true
> + variables:
> + IMAGE: ubuntu2004
> MAKE_CHECK_ARGS: check
>
> -build-system2:
> +acceptance-system-ubuntu-main:
> + <<: *native_test_job_definition
> + needs:
> + - job: build-system-ubuntu-main
> + artifacts: true
> + variables:
> + IMAGE: ubuntu2004
> + MAKE_CHECK_ARGS: check-acceptance
> + <<: *post_acceptance
> +
> +build-system-fedora-alt:
> <<: *native_build_job_definition
> variables:
> IMAGE: fedora
> TARGETS: tricore-softmmu unicore32-softmmu microblaze-softmmu mips-softmmu
> riscv32-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu x86_64-softmmu
> xtensa-softmmu nios2-softmmu or1k-softmmu
> + artifacts:
> + paths:
> + - build
> +
> +check-system-fedora-alt:
> + <<: *native_test_job_definition
> + needs:
> + - job: build-system-fedora-alt
> + artifacts: true
> + variables:
> + IMAGE: fedora
> MAKE_CHECK_ARGS: check
>
> +acceptance-system-fedora-alt:
> + <<: *native_test_job_definition
> + needs:
> + - job: build-system-fedora-alt
> + artifacts: true
> + variables:
> + IMAGE: fedora
> + MAKE_CHECK_ARGS: check-acceptance
> + <<: *post_acceptance
Apparently our acceptance image misses netcat:
(22/45) tests/acceptance/migration.py:Migration.test_migration_with_exec:
SKIP: 'nc' command not found
^ permalink raw reply [flat|nested] 56+ messages in thread* Re: [PULL 28/41] gitlab: add acceptance testing to system builds
2020-09-08 19:54 ` Philippe Mathieu-Daudé
@ 2020-09-09 6:03 ` Thomas Huth
0 siblings, 0 replies; 56+ messages in thread
From: Thomas Huth @ 2020-09-09 6:03 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, Alex Bennée
Cc: Fam Zheng, Peter Maydell, QEMU Developers,
Wainer dos Santos Moschetta, Pavel Dovgalyuk, Cleber Rosa,
Paolo Bonzini
On 08/09/2020 21.54, Philippe Mathieu-Daudé wrote:
> On Tue, Jul 7, 2020 at 9:14 AM Alex Bennée <alex.bennee@linaro.org> wrote:
>>
>> As part of migrating things from Travis to GitLab add the acceptance
>> tests.
[...]
>
> Apparently our acceptance image misses netcat:
> (22/45) tests/acceptance/migration.py:Migration.test_migration_with_exec:
> SKIP: 'nc' command not found
>
Yes, we need to add this to the dockerfiles. I thought I had already
added it once to a couple of them, but apparently that patch got lost in
the shuffle... Can you send a patch? Or shall I put it on my todo list
again?
Thomas
^ permalink raw reply [flat|nested] 56+ messages in thread
* [PULL 29/41] tests/tcg: add more default compilers to configure.sh
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (27 preceding siblings ...)
2020-07-07 7:08 ` [PULL 28/41] gitlab: add acceptance testing to system builds Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 30/41] tests/docker: add a linux-user testing focused image Alex Bennée
` (13 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell; +Cc: Alex Bennée, qemu-devel
We were missing a bunch of compilers which we could use if they were
locally installed. The defaults are based on Debian as they seem to be
the best distro for well distributed cross-build compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-32-alex.bennee@linaro.org>
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index 2326f978562f..37e49736ca40 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -46,20 +46,29 @@ fi
: ${cross_cc_aarch64="aarch64-linux-gnu-gcc"}
: ${cross_cc_aarch64_be="$cross_cc_aarch64"}
: ${cross_cc_cflags_aarch64_be="-mbig-endian"}
+: $(cross_cc_alpha="alpha-linux-gnu-gcc")
: ${cross_cc_arm="arm-linux-gnueabihf-gcc"}
: ${cross_cc_cflags_armeb="-mbig-endian"}
+: ${cross_cc_hppa="hppa-linux-gnu-gcc"}
: ${cross_cc_i386="i386-pc-linux-gnu-gcc"}
: ${cross_cc_cflags_i386="-m32"}
-: ${cross_cc_x86_64="x86_64-pc-linux-gnu-gcc"}
-: ${cross_cc_cflags_x86_64="-m64"}
+: ${cross_cc_m68k="m68k-linux-gnu-gcc"}
+: $(cross_cc_mips64el="mips64el-linux-gnuabi64-gcc")
+: $(cross_cc_mips64="mips64-linux-gnuabi64-gcc")
+: $(cross_cc_mipsel="mipsel-linux-gnu-gcc")
+: $(cross_cc_mips="mips-linux-gnu-gcc")
: ${cross_cc_ppc="powerpc-linux-gnu-gcc"}
: ${cross_cc_cflags_ppc="-m32"}
-: ${cross_cc_ppc64="powerpc-linux-gnu-gcc"}
-: ${cross_cc_cflags_ppc64="-m64"}
+: ${cross_cc_ppc64="powerpc64-linux-gnu-gcc"}
: ${cross_cc_ppc64le="powerpc64le-linux-gnu-gcc"}
-: ${cross_cc_cflags_s390x="-m64"}
+: $(cross_cc_riscv64="riscv64-linux-gnu-gcc")
+: ${cross_cc_s390x="s390x-linux-gnu-gcc"}
+: $(cross_cc_sh4="sh4-linux-gnu-gcc")
: ${cross_cc_cflags_sparc="-m32 -mv8plus -mcpu=ultrasparc"}
+: ${cross_cc_sparc64="sparc64-linux-gnu-gcc"}
: ${cross_cc_cflags_sparc64="-m64 -mcpu=ultrasparc"}
+: ${cross_cc_x86_64="x86_64-pc-linux-gnu-gcc"}
+: ${cross_cc_cflags_x86_64="-m64"}
for target in $target_list; do
arch=${target%%-*}
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 30/41] tests/docker: add a linux-user testing focused image
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (28 preceding siblings ...)
2020-07-07 7:08 ` [PULL 29/41] tests/tcg: add more default compilers to configure.sh Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 31/41] linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va Alex Bennée
` (12 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Philippe Mathieu-Daudé, Alex Bennée,
qemu-devel
We happily use all the cross images for both cross-building QEMU as
well as building the linux-user tests. However calling docker from
within docker seems not to work. As we can build in Debian anyway why
not include an image that has all the compilers available for
non-docker invocation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-33-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index f353359fd8ba..a7621c4204c7 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -64,6 +64,13 @@ amd64-debian-cross-container:
variables:
NAME: debian-amd64-cross
+amd64-debian-user-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-all-test-cross
+
amd64-debian-container:
<<: *container_job_definition
stage: containers-layer2
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index a26177abc258..a104e9df2817 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -134,6 +134,7 @@ docker-image-travis: NOUSER=1
# Specialist build images, sometimes very limited tools
docker-image-debian-tricore-cross: docker-image-debian9
+docker-image-debian-all-test-cross: docker-image-debian10
docker-image-debian-arm64-test-cross: docker-image-debian11
# These images may be good enough for building tests but not for test builds
diff --git a/tests/docker/dockerfiles/debian-all-test-cross.docker b/tests/docker/dockerfiles/debian-all-test-cross.docker
new file mode 100644
index 000000000000..dedcea58b467
--- /dev/null
+++ b/tests/docker/dockerfiles/debian-all-test-cross.docker
@@ -0,0 +1,53 @@
+#
+# Docker all cross-compiler target (tests only)
+#
+# While the normal cross builds take care to setup proper multiarch
+# build environments which can cross build QEMU this just installs the
+# basic compilers for as many targets as possible. We shall use this
+# to build and run linux-user tests on GitLab
+#
+FROM qemu/debian10
+
+# What we need to build QEMU itself
+RUN apt update && \
+ DEBIAN_FRONTEND=noninteractive eatmydata \
+ apt build-dep -yy qemu
+
+# Add the foreign architecture we want and install dependencies
+RUN DEBIAN_FRONTEND=noninteractive eatmydata \
+ apt install -y --no-install-recommends \
+ gcc-aarch64-linux-gnu \
+ libc6-dev-arm64-cross \
+ gcc-alpha-linux-gnu \
+ libc6.1-dev-alpha-cross \
+ gcc-arm-linux-gnueabihf \
+ libc6-dev-armhf-cross \
+ gcc-hppa-linux-gnu \
+ libc6-dev-hppa-cross \
+ gcc-m68k-linux-gnu \
+ libc6-dev-m68k-cross \
+ gcc-mips-linux-gnu \
+ libc6-dev-mips-cross \
+ gcc-mips64-linux-gnuabi64 \
+ libc6-dev-mips64-cross \
+ gcc-mips64el-linux-gnuabi64 \
+ libc6-dev-mips64el-cross \
+ gcc-mipsel-linux-gnu \
+ libc6-dev-mipsel-cross \
+ gcc-powerpc-linux-gnu \
+ libc6-dev-powerpc-cross \
+ gcc-powerpc64-linux-gnu \
+ libc6-dev-ppc64-cross \
+ gcc-powerpc64le-linux-gnu \
+ libc6-dev-ppc64el-cross \
+ gcc-riscv64-linux-gnu \
+ libc6-dev-riscv64-cross \
+ gcc-s390x-linux-gnu \
+ libc6-dev-s390x-cross \
+ gcc-sh4-linux-gnu \
+ libc6-dev-sh4-cross \
+ gcc-sparc64-linux-gnu \
+ libc6-dev-sparc64-cross
+
+ENV QEMU_CONFIGURE_OPTS --disable-system --disable-docs --disable-tools
+ENV DEF_TARGET_LIST aarch64-linux-user,alpha-linux-user,arm-linux-user,hppa-linux-user,i386-linux-user,m68k-linux-user,mips-linux-user,mips64-linux-user,mips64el-linux-user,mipsel-linux-user,ppc-linux-user,ppc64-linux-user,ppc64le-linux-user,riscv64-linux-user,s390x-linux-user,sh4-linux-user,sparc64-linux-user
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 31/41] linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (29 preceding siblings ...)
2020-07-07 7:08 ` [PULL 30/41] tests/docker: add a linux-user testing focused image Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 32/41] gitlab: enable check-tcg for linux-user tests Alex Bennée
` (11 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell; +Cc: Riku Voipio, Alex Bennée, qemu-devel, Laurent Vivier
Given we assert the requested address matches what we asked we should
also make that clear in the mmap flags. Otherwise we see failures in
the GitLab environment for some currently unknown but allowable
reason. We use MAP_FIXED_NOREPLACE if we can so we don't just clobber
an existing mapping. Also include the strerror string for a bit more
info on failure.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-34-alex.bennee@linaro.org>
diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index b5cb21384a1c..7e7f642332dc 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -2294,7 +2294,7 @@ static void pgb_dynamic(const char *image_name, long align)
static void pgb_reserved_va(const char *image_name, abi_ulong guest_loaddr,
abi_ulong guest_hiaddr, long align)
{
- const int flags = MAP_ANONYMOUS | MAP_PRIVATE | MAP_NORESERVE;
+ int flags = MAP_ANONYMOUS | MAP_PRIVATE | MAP_NORESERVE;
void *addr, *test;
if (guest_hiaddr > reserved_va) {
@@ -2307,15 +2307,19 @@ static void pgb_reserved_va(const char *image_name, abi_ulong guest_loaddr,
/* Widen the "image" to the entire reserved address space. */
pgb_static(image_name, 0, reserved_va, align);
+#ifdef MAP_FIXED_NOREPLACE
+ flags |= MAP_FIXED_NOREPLACE;
+#endif
+
/* Reserve the memory on the host. */
assert(guest_base != 0);
test = g2h(0);
addr = mmap(test, reserved_va, PROT_NONE, flags, -1, 0);
if (addr == MAP_FAILED) {
error_report("Unable to reserve 0x%lx bytes of virtual address "
- "space for use as guest address space (check your "
+ "space (%s) for use as guest address space (check your "
"virtual memory ulimit setting or reserve less "
- "using -R option)", reserved_va);
+ "using -R option)", reserved_va, strerror(errno));
exit(EXIT_FAILURE);
}
assert(addr == test);
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 32/41] gitlab: enable check-tcg for linux-user tests
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (30 preceding siblings ...)
2020-07-07 7:08 ` [PULL 31/41] linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 33/41] gitlab: add avocado asset caching Alex Bennée
` (10 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Philippe Mathieu-Daudé, Thomas Huth, Alex Bennée,
qemu-devel, Wainer dos Santos Moschetta
Switch to building in the new debian-all-test-cross image which has
most of the cross compilers inline.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-35-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 93baf98232d7..257947853b72 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -143,10 +143,9 @@ build-tcg-disabled:
build-user:
<<: *native_build_job_definition
variables:
- IMAGE: ubuntu2004
- CONFIGURE_ARGS: --disable-system --disable-guest-agent
- --disable-capstone --disable-slirp --disable-fdt
- MAKE_CHECK_ARGS: run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
+ IMAGE: debian-all-test-cross
+ CONFIGURE_ARGS: --disable-tools --disable-system
+ MAKE_CHECK_ARGS: check-tcg
build-clang:
<<: *native_build_job_definition
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 33/41] gitlab: add avocado asset caching
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (31 preceding siblings ...)
2020-07-07 7:08 ` [PULL 32/41] gitlab: enable check-tcg for linux-user tests Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 34/41] gitlab: split build-disabled into two phases Alex Bennée
` (9 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Philippe Mathieu-Daudé, Thomas Huth, Alex Bennée,
qemu-devel, Wainer dos Santos Moschetta
These can be quite big so lets cache them. I couldn't find any nots on
ccache in the gitlab docs so I've just ignored it for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-36-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 257947853b72..13e9531724d2 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -8,6 +8,12 @@ stages:
- build
- test
+# We assume GitLab has it's own caching set up for RPM/APT repositories so we
+# just take care of avocado assets here.
+cache:
+ paths:
+ - $HOME/avocado/data/cache
+
include:
- local: '/.gitlab-ci.d/edk2.yml'
- local: '/.gitlab-ci.d/opensbi.yml'
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 34/41] gitlab: split build-disabled into two phases
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (32 preceding siblings ...)
2020-07-07 7:08 ` [PULL 33/41] gitlab: add avocado asset caching Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 35/41] gitlab: limit re-builds of the containers Alex Bennée
` (8 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Philippe Mathieu-Daudé, Thomas Huth, Alex Bennée,
qemu-devel, Wainer dos Santos Moschetta
As we run check-qtest in "SLOW" mode this can timeout so split into
two jobs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-37-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 13e9531724d2..83e38ea19f3d 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -113,7 +113,7 @@ acceptance-system-fedora-alt:
MAKE_CHECK_ARGS: check-acceptance
<<: *post_acceptance
-build-disabled:
+build-system-fedora-disabled:
<<: *native_build_job_definition
variables:
IMAGE: fedora
@@ -124,6 +124,17 @@ build-disabled:
--disable-qom-cast-debug --disable-spice --disable-vhost-vsock
--disable-vhost-net --disable-vhost-crypto --disable-vhost-user
TARGETS: i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user
+ artifacts:
+ paths:
+ - build
+
+qtest-system-fedora-disabled:
+ <<: *native_test_job_definition
+ needs:
+ - job: build-system-fedora-disabled
+ artifacts: true
+ variables:
+ IMAGE: fedora
MAKE_CHECK_ARGS: check-qtest SPEED=slow
build-tcg-disabled:
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 35/41] gitlab: limit re-builds of the containers
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (33 preceding siblings ...)
2020-07-07 7:08 ` [PULL 34/41] gitlab: split build-disabled into two phases Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 36/41] containers.yml: build with docker.py tooling Alex Bennée
` (7 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell; +Cc: Philippe Mathieu-Daudé, Alex Bennée, qemu-devel
Most of the time we are just rebuilding the same things. We can skip
this although currently there is no mechanism for picking up new
distro releases.
Rather than try to be too fine grained allow any change to trigger all
the images being rebuilt.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-38-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index a7621c4204c7..ea350eacff70 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -17,6 +17,12 @@
- docker push "$TAG"
after_script:
- docker logout
+ rules:
+ - changes:
+ - .gitlab-ci.d/containers.yml
+ - tests/docker/*
+ - if: '$CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH'
+ - if: '$CI_COMMIT_REF_NAME == "testing/next"'
amd64-centos7-container:
<<: *container_job_definition
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 36/41] containers.yml: build with docker.py tooling
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (34 preceding siblings ...)
2020-07-07 7:08 ` [PULL 35/41] gitlab: limit re-builds of the containers Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 37/41] testing: add check-build target Alex Bennée
` (6 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell; +Cc: Alex Bennée, qemu-devel
Instead of building the docker files directly use the same docker.py
scripting as we do for building locally. This should help ensure we
use the exact same steps and allow us to cache properly when building
locally.
To get this working you have to have a fairly recent docker binary
otherwise you will see the error message:
=> ERROR importing cache manifest from registry.gitlab....
So far docker 19.03.12 works (from the docker apt repos) but 18.09.1,
build 4c52b90 which is packaged in Debian Buster fails.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-39-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index ea350eacff70..b1e39cfd9ac1 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -6,14 +6,17 @@
before_script:
- export TAG="$CI_REGISTRY_IMAGE/qemu/$NAME:latest"
- export COMMON_TAG="$CI_REGISTRY/qemu-project/qemu/$NAME:latest"
+ - apk add python3
- docker info
- docker login registry.gitlab.com -u "$CI_REGISTRY_USER" -p "$CI_REGISTRY_PASSWORD"
script:
+ - echo "TAG:$TAG"
+ - echo "COMMON_TAG:$COMMON_TAG"
- docker pull "$TAG" || docker pull "$COMMON_TAG" || true
- - sed -i -e "s,FROM qemu/,FROM $CI_REGISTRY_IMAGE/qemu/," tests/docker/dockerfiles/$NAME.docker
- - DOCKER_BUILDKIT=1 docker build --cache-from "$TAG" --cache-from "$COMMON_TAG" --tag "$TAG"
- --build-arg BUILDKIT_INLINE_CACHE=1
- -f "tests/docker/dockerfiles/$NAME.docker" tests/docker/dockerfiles
+ - ./tests/docker/docker.py --engine docker build
+ -t "qemu:$NAME" -f "tests/docker/dockerfiles/$NAME.docker"
+ -r $CI_REGISTRY_IMAGE
+ - docker tag "qemu:$NAME" "$TAG"
- docker push "$TAG"
after_script:
- docker logout
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 37/41] testing: add check-build target
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (35 preceding siblings ...)
2020-07-07 7:08 ` [PULL 36/41] containers.yml: build with docker.py tooling Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 38/41] shippable: pull images from registry instead of building Alex Bennée
` (5 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Thomas Huth, Daniel P . Berrangé, Alex Bennée,
qemu-devel, Wainer dos Santos Moschetta,
Philippe Mathieu-Daudé, Philippe Mathieu-Daudé
If we want to continue to split build and check phase it seems like a
good idea to allow building of the tests during our multi-threaded
build phase.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200701135652.1366-40-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 83e38ea19f3d..b0e5417146bf 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -36,7 +36,7 @@ include:
- make -j"$JOBS"
- if test -n "$MAKE_CHECK_ARGS";
then
- make $MAKE_CHECK_ARGS ;
+ make -j"$JOBS" $MAKE_CHECK_ARGS ;
fi
.native_test_job_template: &native_test_job_definition
@@ -60,6 +60,7 @@ build-system-ubuntu-main:
TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu lm32-softmmu
moxie-softmmu microblazeel-softmmu mips64el-softmmu m68k-softmmu ppc-softmmu
riscv64-softmmu sparc-softmmu
+ MAKE_CHECK_ARGS: check-build
artifacts:
paths:
- build
@@ -90,6 +91,7 @@ build-system-fedora-alt:
TARGETS: tricore-softmmu unicore32-softmmu microblaze-softmmu mips-softmmu
riscv32-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu x86_64-softmmu
xtensa-softmmu nios2-softmmu or1k-softmmu
+ MAKE_CHECK_ARGS: check-build
artifacts:
paths:
- build
@@ -124,6 +126,7 @@ build-system-fedora-disabled:
--disable-qom-cast-debug --disable-spice --disable-vhost-vsock
--disable-vhost-net --disable-vhost-crypto --disable-vhost-user
TARGETS: i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user
+ MAKE_CHECK_ARGS: check-build
artifacts:
paths:
- build
diff --git a/tests/Makefile.include b/tests/Makefile.include
index c316e0d66475..94b1cc8302ed 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -22,6 +22,8 @@ endif
@echo " $(MAKE) check-venv Creates a Python venv for tests"
@echo " $(MAKE) check-clean Clean the tests and related data"
@echo
+ @echo "The following are useful for CI builds"
+ @echo " $(MAKE) check-build Build most test binaris"
@echo " $(MAKE) get-vm-images Downloads all images used by acceptance tests, according to configured targets (~350 MB each, 1.5 GB max)"
@echo
@echo
@@ -649,6 +651,10 @@ $(patsubst %, check-qtest-%, $(QTEST_TARGETS)): check-qtest-%: %-softmmu/all $(c
QTEST_QEMU_BINARY=$*-softmmu/qemu-system-$* \
QTEST_QEMU_IMG=qemu-img$(EXESUF))
+build-qtest: $(patsubst %, %-softmmu/all, $(QTEST_TARGETS)) $(check-qtest-y)
+
+build-unit: $(check-unit-y)
+
check-unit: $(check-unit-y)
$(call do_test_human, $^)
@@ -680,7 +686,6 @@ check-report.tap: $(patsubst %,check-report-qtest-%.tap, $(QTEST_TARGETS)) check
FP_TEST_BIN=$(BUILD_DIR)/tests/fp/fp-test
# the build dir is created by configure
-.PHONY: $(FP_TEST_BIN)
$(FP_TEST_BIN): config-host.h $(test-util-obj-y)
$(call quiet-command, \
$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)" $(notdir $@), \
@@ -814,9 +819,10 @@ check-softfloat-ops: $(SF_MATH_RULES)
.PHONY: check-softfloat
ifeq ($(CONFIG_TCG),y)
-check-softfloat: check-softfloat-conv check-softfloat-compare check-softfloat-ops
+build-softfloat: $(FP_TEST_BIN)
+check-softfloat: build-softfloat check-softfloat-conv check-softfloat-compare check-softfloat-ops
else
-check-softfloat:
+build-softfloat check-softfloat:
$(call quiet-command, /bin/true, "FLOAT TEST", \
"SKIPPED for non-TCG builds")
endif
@@ -955,7 +961,8 @@ check-qtest: $(patsubst %,check-qtest-%, $(QTEST_TARGETS))
ifeq ($(CONFIG_TOOLS),y)
check-block: $(patsubst %,check-%, $(check-block-y))
endif
-check: check-block check-qapi-schema check-unit check-softfloat check-qtest check-decodetree
+check-build: build-unit build-softfloat build-qtest
+
check-clean:
rm -rf $(check-unit-y) tests/*.o tests/*/*.o $(QEMU_IOTESTS_HELPERS-y)
rm -rf $(sort $(foreach target,$(SYSEMU_TARGET_LIST), $(check-qtest-$(target)-y:%=tests/qtest/%$(EXESUF))) $(check-qtest-generic-y:%=tests/qtest/%$(EXESUF)))
@@ -963,6 +970,8 @@ check-clean:
rm -f tests/qtest/dbus-vmstate1-gen-timestamp
rm -rf $(TESTS_VENV_DIR) $(TESTS_RESULTS_DIR)
+check: check-block check-qapi-schema check-unit check-softfloat check-qtest check-decodetree
+
clean: check-clean
# Build the help program automatically
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 38/41] shippable: pull images from registry instead of building
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (36 preceding siblings ...)
2020-07-07 7:08 ` [PULL 37/41] testing: add check-build target Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 39/41] travis.yml: Test also the other targets on s390x Alex Bennée
` (4 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Fam Zheng, Philippe Mathieu-Daudé, Alex Bennée,
qemu-devel
Now we have a source for registry images pull from there rather than
re-building every time on shippable.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-41-alex.bennee@linaro.org>
diff --git a/.shippable.yml b/.shippable.yml
index 81905727d14c..f6b742432e5f 100644
--- a/.shippable.yml
+++ b/.shippable.yml
@@ -26,12 +26,10 @@ env:
- IMAGE=debian-ppc64el-cross
TARGET_LIST=ppc64-softmmu,ppc64-linux-user,ppc64abi32-linux-user
build:
- pre_ci:
- - make docker-image-${IMAGE} V=1
pre_ci_boot:
- image_name: qemu/${IMAGE}
+ image_name: registry.gitlab.com/qemu-project/qemu/${IMAGE}
image_tag: latest
- pull: false
+ pull: true
options: "-e HOME=/root"
ci:
- unset CC
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 39/41] travis.yml: Test also the other targets on s390x
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (37 preceding siblings ...)
2020-07-07 7:08 ` [PULL 38/41] shippable: pull images from registry instead of building Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 40/41] tests/qht-bench: Adjust testing rate by -1 Alex Bennée
` (3 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Laurent Vivier, Fam Zheng, Thomas Huth,
Philippe Mathieu-Daudé, Cornelia Huck, qemu-devel,
open list:S390 general arch..., Alex Bennée
From: Thomas Huth <thuth@redhat.com>
s390x is our only big endian host in our CI, so building and testing QEMU
there is quite valuable. Thus let's also test the other targets with
additional jobs (also using different sets of pre-installed libraries to
get a better coverage of the things that we test).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200608114049.4693-1-thuth@redhat.com>
diff --git a/.travis.yml b/.travis.yml
index c24dfbe377f3..ab429500fc3c 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -482,6 +482,45 @@ jobs:
$(exit $BUILD_RC);
fi
+ - name: "[s390x] GCC (other-softmmu)"
+ arch: s390x
+ dist: bionic
+ addons:
+ apt_packages:
+ - libaio-dev
+ - libattr1-dev
+ - libcap-ng-dev
+ - libgnutls28-dev
+ - libiscsi-dev
+ - liblttng-ust-dev
+ - liblzo2-dev
+ - libncurses-dev
+ - libnfs-dev
+ - libnss3-dev
+ - libpixman-1-dev
+ - libsdl2-dev
+ - libsdl2-image-dev
+ - libseccomp-dev
+ - libsnappy-dev
+ - libzstd-dev
+ - nettle-dev
+ - xfslibs-dev
+ # Tests dependencies
+ - genisoimage
+ env:
+ - CONFIG="--disable-containers --audio-drv-list=sdl --disable-user
+ --target-list-exclude=${MAIN_SOFTMMU_TARGETS}"
+
+ - name: "[s390x] GCC (user)"
+ arch: s390x
+ dist: bionic
+ addons:
+ apt_packages:
+ - libgcrypt20-dev
+ - libgnutls28-dev
+ env:
+ - CONFIG="--disable-containers --disable-system"
+
- name: "[s390x] Clang (disable-tcg)"
arch: s390x
dist: bionic
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 40/41] tests/qht-bench: Adjust testing rate by -1
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (38 preceding siblings ...)
2020-07-07 7:08 ` [PULL 39/41] travis.yml: Test also the other targets on s390x Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 7:08 ` [PULL 41/41] tests/qht-bench: Adjust threshold computation Alex Bennée
` (2 subsequent siblings)
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Alex Bennée, Philippe Mathieu-Daudé, Emilio G . Cota,
Richard Henderson, qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Since the seed must be non-zero, subtracting 1 means puts the
rate in 0..UINT64_MAX-1, which allows the 0 and UINT64_MAX
thresholds to corrspond to 0% (never) and 100% (always).
Suggested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626200950.1015121-2-richard.henderson@linaro.org>
diff --git a/tests/qht-bench.c b/tests/qht-bench.c
index eb88a9013761..ad885d89d054 100644
--- a/tests/qht-bench.c
+++ b/tests/qht-bench.c
@@ -25,7 +25,13 @@ struct thread_stats {
struct thread_info {
void (*func)(struct thread_info *);
struct thread_stats stats;
- uint64_t r;
+ /*
+ * Seed is in the range [1..UINT64_MAX], because the RNG requires
+ * a non-zero seed. To use, subtract 1 and compare against the
+ * threshold with </>=. This lets threshold = 0 never match (0% hit),
+ * and threshold = UINT64_MAX always match (100% hit).
+ */
+ uint64_t seed;
bool write_op; /* writes alternate between insertions and removals */
bool resize_down;
} QEMU_ALIGNED(64); /* avoid false sharing among threads */
@@ -131,8 +137,9 @@ static uint64_t xorshift64star(uint64_t x)
static void do_rz(struct thread_info *info)
{
struct thread_stats *stats = &info->stats;
+ uint64_t r = info->seed - 1;
- if (info->r < resize_threshold) {
+ if (r < resize_threshold) {
size_t size = info->resize_down ? resize_min : resize_max;
bool resized;
@@ -151,13 +158,14 @@ static void do_rz(struct thread_info *info)
static void do_rw(struct thread_info *info)
{
struct thread_stats *stats = &info->stats;
+ uint64_t r = info->seed - 1;
uint32_t hash;
long *p;
- if (info->r >= update_threshold) {
+ if (r >= update_threshold) {
bool read;
- p = &keys[info->r & (lookup_range - 1)];
+ p = &keys[r & (lookup_range - 1)];
hash = hfunc(*p);
read = qht_lookup(&ht, p, hash);
if (read) {
@@ -166,7 +174,7 @@ static void do_rw(struct thread_info *info)
stats->not_rd++;
}
} else {
- p = &keys[info->r & (update_range - 1)];
+ p = &keys[r & (update_range - 1)];
hash = hfunc(*p);
if (info->write_op) {
bool written = false;
@@ -208,7 +216,7 @@ static void *thread_func(void *p)
rcu_read_lock();
while (!atomic_read(&test_stop)) {
- info->r = xorshift64star(info->r);
+ info->seed = xorshift64star(info->seed);
info->func(info);
}
rcu_read_unlock();
@@ -221,7 +229,7 @@ static void *thread_func(void *p)
static void prepare_thread_info(struct thread_info *info, int i)
{
/* seed for the RNG; each thread should have a different one */
- info->r = (i + 1) ^ time(NULL);
+ info->seed = (i + 1) ^ time(NULL);
/* the first update will be a write */
info->write_op = true;
/* the first resize will be down */
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* [PULL 41/41] tests/qht-bench: Adjust threshold computation
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (39 preceding siblings ...)
2020-07-07 7:08 ` [PULL 40/41] tests/qht-bench: Adjust testing rate by -1 Alex Bennée
@ 2020-07-07 7:08 ` Alex Bennée
2020-07-07 9:39 ` [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
2020-07-09 11:31 ` Peter Maydell
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 7:08 UTC (permalink / raw)
To: peter.maydell
Cc: Alex Bennée, Philippe Mathieu-Daudé, Richard Henderson,
qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
In 06c4cc3660b3, we split the multiplication in two parts to avoid
a clang warning. But because double still rounds to 53 bits, this
does not provide additional precision beyond multiplication by
nextafter(0x1p64, 0), the largest representable value smaller
than 2**64.
However, since we have eliminated 1.0, mutiplying by 2**64 produces
a better distribution of input values to the output values.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626200950.1015121-3-richard.henderson@linaro.org>
diff --git a/tests/qht-bench.c b/tests/qht-bench.c
index ad885d89d054..362f03cb0370 100644
--- a/tests/qht-bench.c
+++ b/tests/qht-bench.c
@@ -289,11 +289,25 @@ static void pr_params(void)
static void do_threshold(double rate, uint64_t *threshold)
{
+ /*
+ * For 0 <= rate <= 1, scale to fit in a uint64_t.
+ *
+ * Scale by 2**64, with a special case for 1.0.
+ * The remainder of the possible values are scattered between 0
+ * and 0xfffffffffffff800 (nextafter(0x1p64, 0)).
+ *
+ * Note that we cannot simply scale by UINT64_MAX, because that
+ * value is not representable as an IEEE double value.
+ *
+ * If we scale by the next largest value, nextafter(0x1p64, 0),
+ * then the remainder of the possible values are scattered between
+ * 0 and 0xfffffffffffff000. Which leaves us with a gap between
+ * the final two inputs that is twice as large as any other.
+ */
if (rate == 1.0) {
*threshold = UINT64_MAX;
} else {
- *threshold = (rate * 0xffff000000000000ull)
- + (rate * 0x0000ffffffffffffull);
+ *threshold = rate * 0x1p64;
}
}
--
2.20.1
^ permalink raw reply related [flat|nested] 56+ messages in thread* Re: [PULL 00/41] testing updates (vm, gitlab, misc build fixes)
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (40 preceding siblings ...)
2020-07-07 7:08 ` [PULL 41/41] tests/qht-bench: Adjust threshold computation Alex Bennée
@ 2020-07-07 9:39 ` Alex Bennée
2020-07-09 11:31 ` Peter Maydell
42 siblings, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-07 9:39 UTC (permalink / raw)
To: peter.maydell; +Cc: Alex Bennée, qemu-devel
Alex Bennée <alex.bennee@linaro.org> writes:
> There will be some docker failures until the official repository has
> seeded but local builds should continue to work.
You can force the docker builds to use my registry for example by setting:
make docker-test-build REGISTRY=registry.gitlab.com/stsquad/qemu
>
> ----
>
> The following changes since commit eb6490f544388dd24c0d054a96dd304bc7284450:
>
> Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200703' into staging (2020-07-04 16:08:41 +0100)
>
> are available in the Git repository at:
>
> https://github.com/stsquad/qemu.git tags/pull-testing-and-misc-070720-1
>
> for you to fetch changes up to 6a726e8ca0286e3ed69945abd447099f6f6a903c:
>
> tests/qht-bench: Adjust threshold computation (2020-07-07 07:57:41 +0100)
>
> ----------------------------------------------------------------
> Testing and build updates:
>
> - tests/vm support for aarch64 VMs
> - tests/tcg better cross-compiler detection
> - update docker tooling to support registries
> - gitlab build docker images and store in registry
> - gitlab use docker images for builds
> - a number of skipIf updates to support move
> - linux-user MAP_FIXED_NOREPLACE fix
> - qht-bench compiler tweaks
> - configure fix for secret keyring
> - tsan fiber annotation clean-up
>
> ----------------------------------------------------------------
> Alex Bennée (23):
> tests/vm: switch from optsparse to argparse
> tests/vm: allow us to take advantage of MTTCG
> tests/docker: check for an parameters not empty string
> tests/docker: change tag naming scheme of our images
> .gitignore: un-ignore .gitlab-ci.d
> gitlab: build containers with buildkit and metadata
> tests/docker: add --registry support to tooling
> tests/docker: add packages needed for check-acceptance
> tests/acceptance: skip s390x_ccw_vrtio_tcg on GitLab
> tests/acceptance: fix dtb path for machine_rx_gdbsim
> tests/acceptance: skip multicore mips_malta tests on GitLab
> tests/acceptance: skip LinuxInitrd 2gib with v4.16 on GitLab
> gitlab: add acceptance testing to system builds
> tests/tcg: add more default compilers to configure.sh
> tests/docker: add a linux-user testing focused image
> linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
> gitlab: enable check-tcg for linux-user tests
> gitlab: add avocado asset caching
> gitlab: split build-disabled into two phases
> gitlab: limit re-builds of the containers
> containers.yml: build with docker.py tooling
> testing: add check-build target
> shippable: pull images from registry instead of building
>
> Daniel P. Berrangé (3):
> gitlab: introduce explicit "container" and "build" stages
> gitlab: build all container images during CI
> gitlab: convert jobs to use custom built containers
>
> David Edmondson (1):
> crypto/linux_keyring: fix 'secret_keyring' configure test
>
> Richard Henderson (2):
> tests/qht-bench: Adjust testing rate by -1
> tests/qht-bench: Adjust threshold computation
>
> Robert Foley (10):
> util/coroutine: Cleanup start_switch_fiber_ for TSAN.
> tests/vm: pass args through to BaseVM's __init__
> tests/vm: Add configuration to basevm.py
> tests/vm: Added configuration file support
> tests/vm: Add common Ubuntu python module
> tests/vm: Added a new script for ubuntu.aarch64.
> tests/vm: Added a new script for centos.aarch64.
> tests/vm: change scripts to use self._config
> python/qemu: Add ConsoleSocket for optional use in QEMUMachine
> tests/vm: Add workaround to consume console
>
> Thomas Huth (2):
> gitlab-ci: Fix the change rules after moving the YML files
> travis.yml: Test also the other targets on s390x
>
> configure | 31 +-
> linux-user/elfload.c | 10 +-
> tests/qht-bench.c | 40 ++-
> util/coroutine-ucontext.c | 52 ++--
> .gitignore | 1 +
> .gitlab-ci.d/containers.yml | 263 ++++++++++++++++
> .gitlab-ci.d/edk2.yml | 5 +-
> .gitlab-ci.d/opensbi.yml | 5 +-
> .gitlab-ci.yml | 281 ++++++++++-------
> .shippable.yml | 8 +-
> .travis.yml | 62 ++--
> python/qemu/console_socket.py | 110 +++++++
> python/qemu/machine.py | 23 +-
> tests/Makefile.include | 19 +-
> tests/acceptance/boot_linux.py | 2 +
> tests/acceptance/linux_initrd.py | 3 +
> tests/acceptance/machine_mips_malta.py | 3 +
> tests/acceptance/machine_rx_gdbsim.py | 2 +-
> tests/acceptance/replay_kernel.py | 2 +-
> tests/docker/Makefile.include | 17 +-
> tests/docker/common.rc | 2 +-
> tests/docker/docker.py | 46 ++-
> .../dockerfiles/debian-all-test-cross.docker | 53 ++++
> tests/docker/dockerfiles/debian-alpha-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-amd64-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-amd64.docker | 2 +-
> tests/docker/dockerfiles/debian-arm64-cross.docker | 2 +-
> .../dockerfiles/debian-arm64-test-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-armel-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-armhf-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-hppa-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-m68k-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-mips-cross.docker | 2 +-
> .../docker/dockerfiles/debian-mips64-cross.docker | 2 +-
> .../dockerfiles/debian-mips64el-cross.docker | 2 +-
> .../docker/dockerfiles/debian-mipsel-cross.docker | 2 +-
> .../docker/dockerfiles/debian-powerpc-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-ppc64-cross.docker | 2 +-
> .../docker/dockerfiles/debian-ppc64el-cross.docker | 2 +-
> .../docker/dockerfiles/debian-riscv64-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-s390x-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-sh4-cross.docker | 2 +-
> .../docker/dockerfiles/debian-sparc64-cross.docker | 2 +-
> .../docker/dockerfiles/debian-tricore-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-win32-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-win64-cross.docker | 2 +-
> tests/docker/dockerfiles/debian9-mxe.docker | 2 +-
> tests/docker/dockerfiles/fedora.docker | 7 +
> tests/docker/dockerfiles/ubuntu2004.docker | 10 +-
> tests/tcg/Makefile.qemu | 4 +-
> tests/tcg/configure.sh | 19 +-
> tests/vm/Makefile.include | 22 ++
> tests/vm/aarch64vm.py | 106 +++++++
> tests/vm/basevm.py | 344 +++++++++++++++------
> tests/vm/centos-8-aarch64.ks | 51 +++
> tests/vm/centos.aarch64 | 227 ++++++++++++++
> tests/vm/conf_example_aarch64.yml | 51 +++
> tests/vm/conf_example_x86.yml | 50 +++
> tests/vm/fedora | 17 +-
> tests/vm/freebsd | 16 +-
> tests/vm/netbsd | 19 +-
> tests/vm/openbsd | 17 +-
> tests/vm/ubuntu.aarch64 | 68 ++++
> tests/vm/ubuntu.i386 | 46 +--
> tests/vm/ubuntuvm.py | 60 ++++
> 65 files changed, 1839 insertions(+), 383 deletions(-)
> create mode 100644 .gitlab-ci.d/containers.yml
> create mode 100644 python/qemu/console_socket.py
> create mode 100644 tests/docker/dockerfiles/debian-all-test-cross.docker
> create mode 100644 tests/vm/aarch64vm.py
> create mode 100644 tests/vm/centos-8-aarch64.ks
> create mode 100755 tests/vm/centos.aarch64
> create mode 100644 tests/vm/conf_example_aarch64.yml
> create mode 100644 tests/vm/conf_example_x86.yml
> create mode 100755 tests/vm/ubuntu.aarch64
> create mode 100644 tests/vm/ubuntuvm.py
--
Alex Bennée
^ permalink raw reply [flat|nested] 56+ messages in thread* Re: [PULL 00/41] testing updates (vm, gitlab, misc build fixes)
2020-07-07 7:08 [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
` (41 preceding siblings ...)
2020-07-07 9:39 ` [PULL 00/41] testing updates (vm, gitlab, misc build fixes) Alex Bennée
@ 2020-07-09 11:31 ` Peter Maydell
2020-07-09 12:24 ` Philippe Mathieu-Daudé
2020-07-09 15:46 ` Alex Bennée
42 siblings, 2 replies; 56+ messages in thread
From: Peter Maydell @ 2020-07-09 11:31 UTC (permalink / raw)
To: Alex Bennée; +Cc: QEMU Developers
On Tue, 7 Jul 2020 at 08:09, Alex Bennée <alex.bennee@linaro.org> wrote:
>
> There will be some docker failures until the official repository has
> seeded but local builds should continue to work.
>
> ----
>
> The following changes since commit eb6490f544388dd24c0d054a96dd304bc7284450:
>
> Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200703' into staging (2020-07-04 16:08:41 +0100)
>
> are available in the Git repository at:
>
> https://github.com/stsquad/qemu.git tags/pull-testing-and-misc-070720-1
>
> for you to fetch changes up to 6a726e8ca0286e3ed69945abd447099f6f6a903c:
>
> tests/qht-bench: Adjust threshold computation (2020-07-07 07:57:41 +0100)
>
> ----------------------------------------------------------------
> Testing and build updates:
>
> - tests/vm support for aarch64 VMs
> - tests/tcg better cross-compiler detection
> - update docker tooling to support registries
> - gitlab build docker images and store in registry
> - gitlab use docker images for builds
> - a number of skipIf updates to support move
> - linux-user MAP_FIXED_NOREPLACE fix
> - qht-bench compiler tweaks
> - configure fix for secret keyring
> - tsan fiber annotation clean-up
freebsd failed:
perl: warning: Please check that your locale settings:
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
con recv: Loading /boot/defaults/loader.conf
con recv: Loading /boot/device.hints
con recv: Loading /boot/loader.conf
con recv: Loading /boot/loader.conf.local
con recv: \/ ``` ` s` `.....---.......--.```
-/ +o .--` /y:` +. yo`:. :o `+- y/
-/` -o/ .- ::/sy+:. /
`-- / `: :` `:
:` / / .- -. --
-. `:` `:` .--
`--. .---.....----. ______ ____ _____ _____
| ____| | _ \ / ____| __ \ | |___ _ __ ___ ___ | |_)
| (___ | | | | | ___| '__/ _ \/ _ \| _ < \___ \| | | | | | | | |
__/ __/| |_) |____) | |__| | | | | | | | || | |
| |_| |_| \___|\___||____/|_____/|_____/
..........................................................................................................................................................................................................................................................................................................................................Welcome
to FreeBSD1. Boot Multi user [Enter]2. Boot Single user3. Escape to
loader prompt4. RebootOptions:/\/\5. Kernel: default/kernel (1 of 1)6.
Boot OptionsAutoboot
con send: 3
con recv: in 10 seconds, hit [Enter] to boot or any other key to stop
con recv:
con recv: Exiting menu!
con recv: Type '?' for a list of commands, 'help' for more detailed help.
con recv: OK
con send: set console=comconsole<enter>
console: *** read timeout ***
console: waiting for: 'OK'
console: line buffer:
con recv: set console=comconso
Failed to prepare guest environment
Traceback (most recent call last):
File "/home/peter.maydell/qemu-freebsd/tests/vm/basevm.py", line 628, in main
return vm.build_image(args.image)
File "/home/peter.maydell/qemu-freebsd/tests/vm/freebsd", line 163,
in build_image
self.console_boot_serial()
File "/home/peter.maydell/qemu-freebsd/tests/vm/freebsd", line 76,
in console_boot_serial
self.console_wait_send("OK", "boot\n")
File "/home/peter.maydell/qemu-freebsd/tests/vm/basevm.py", line
400, in console_wait_send
self.console_wait(wait)
File "/home/peter.maydell/qemu-freebsd/tests/vm/basevm.py", line
340, in console_wait
chars = vm.console_socket.recv(1)
File "/home/peter.maydell/qemu-freebsd/tests/vm/../../python/qemu/console_socket.py",
line 96, in recv
raise socket.timeout
socket.timeout
NetBSD failed:
con recv: postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db)
con recv: Starting inetd.
con recv: Starting cron.
con recv: Thu Jul 9 10:40:07 UTC 2020
con recv: NetBSD/amd64 (localhost) (constty)
con recv: login:
con send: qemu<enter>
con recv: Jul 9 10:40:09 localhost getty[756]: /dev/ttyE2: Device
not configured
con recv: Jul 9 10:40:09 localhost getty[703]: /dev/ttyE3: Device not
configured
con recv: Jul 9 10:40:09 localhost getty[753]: /dev/ttyE1: Device not
configured
con recv: qemu
con recv: Password:
con send: qemupass<enter>
con recv: Login incorrect or refused on this terminal.
console: *** read timeout ***
console: waiting for: 'localhost$'
console: line buffer:
con recv: login:
Failed to prepare guest environment
Traceback (most recent call last):
File "/home/peter.maydell/qemu-netbsd/tests/vm/basevm.py", line 628, in main
return vm.build_image(args.image)
File "/home/peter.maydell/qemu-netbsd/tests/vm/netbsd", line 174, in
build_image
self._config["guest_pass"])
File "/home/peter.maydell/qemu-netbsd/tests/vm/basevm.py", line 408,
in console_ssh_init
self.console_wait_send(prompt, "mkdir .ssh\n")
File "/home/peter.maydell/qemu-netbsd/tests/vm/basevm.py", line 400,
in console_wait_send
self.console_wait(wait)
File "/home/peter.maydell/qemu-netbsd/tests/vm/basevm.py", line 340,
in console_wait
chars = vm.console_socket.recv(1)
File "/home/peter.maydell/qemu-netbsd/tests/vm/../../python/qemu/console_socket.py",
line 96, in recv
raise socket.timeout
socket.timeout
arm-linux-static check-tcg failed:
TEST pauth-4 on aarch64
TEST semihosting on aarch64
SKIPPED semiconsole on aarch64 because MANUAL ONLY
TEST basic gdbstub support
/tmp/tmp6ftb0v61qemu-gdbstub/gdbstub.socket: No such device or address.
SKIPPING (not connected)
BUILD TCG tests for aarch64_be-linux-user
BUILD aarch64_be-linux-user guest-tests SKIPPED
RUN TCG tests for aarch64_be-linux-user
RUN tests for aarch64_be-linux-user SKIPPED
make: Entering directory
'/home/petmay01/linaro/qemu-for-merges/build/all-linux-static'
BUILD debian10
Error response from daemon: manifest for
registry.gitlab.com/qemu-project/qemu/qemu/debian10:latest not found
make: Leaving directory
'/home/petmay01/linaro/qemu-for-merges/build/all-linux-static'
make: Entering directory
'/home/petmay01/linaro/qemu-for-merges/build/all-linux-static'
BUILD debian-alpha-cross
Error response from daemon: manifest for
registry.gitlab.com/qemu-project/qemu/qemu/debian-alpha-cross:latest
not found
registry.gitlab.com/qemu-project/qemu/qemu/debian10:latest not found
Traceback (most recent call last):
File "/home/petmay01/linaro/qemu-for-merges/tests/docker/docker.py",
line 701, in <module>
sys.exit(main())
File "/home/petmay01/linaro/qemu-for-merges/tests/docker/docker.py",
line 697, in main
return args.cmdobj.run(args, argv)
File "/home/petmay01/linaro/qemu-for-merges/tests/docker/docker.py",
line 494, in run
extra_files_cksum=cksum)
File "/home/petmay01/linaro/qemu-for-merges/tests/docker/docker.py",
line 347, in build_image
quiet=quiet)
File "/home/petmay01/linaro/qemu-for-merges/tests/docker/docker.py",
line 244, in _do_check
return subprocess.check_call(self._command + cmd, **kwargs)
File "/usr/lib/python3.6/subprocess.py", line 311, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['docker', 'build', '-t',
'qemu/debian-alpha-cross', '-f',
'/tmp/docker_buildsstz1jcy/tmp_7c70xjh.docker', '--build-arg',
'BUILDKIT_INLINE_CACHE=1', '--cache-from',
'registry.gitlab.com/qemu-project/qemu/qemu/debian-alpha-cross',
'/tmp/docker_buildsstz1jcy']' returned non-zero exit status 1.
/home/petmay01/linaro/qemu-for-merges/tests/docker/Makefile.include:58:
recipe for target 'docker-image-debian-alpha-cross' failed
make: *** [docker-image-debian-alpha-cross] Error 1
Also a compile failure on s390x, but since this isn't related
to changes you made afaict I wonder if it's the result of
a change in the build environment:
/home/ubuntu/qemu/block/ssh.c: In function ‘check_host_key_knownhosts’:
/home/ubuntu/qemu/block/ssh.c:281:28: error: storage size of ‘state’ isn’t known
enum ssh_known_hosts_e state;
^~~~~
/home/ubuntu/qemu/block/ssh.c:289:13: error: implicit declaration of
function ‘ssh_session_is_known_server’ [-Werror=implicit-funct
ion-declaration]
state = ssh_session_is_known_server(s->session);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
[and other errors]
thanks
-- PMM
^ permalink raw reply [flat|nested] 56+ messages in thread* Re: [PULL 00/41] testing updates (vm, gitlab, misc build fixes)
2020-07-09 11:31 ` Peter Maydell
@ 2020-07-09 12:24 ` Philippe Mathieu-Daudé
2020-07-09 13:04 ` Peter Maydell
2020-07-09 15:46 ` Alex Bennée
1 sibling, 1 reply; 56+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-07-09 12:24 UTC (permalink / raw)
To: Peter Maydell, Alex Bennée; +Cc: QEMU Developers
On 7/9/20 1:31 PM, Peter Maydell wrote:
> On Tue, 7 Jul 2020 at 08:09, Alex Bennée <alex.bennee@linaro.org> wrote:
>>
>> There will be some docker failures until the official repository has
>> seeded but local builds should continue to work.
>>
>> ----
>>
>> The following changes since commit eb6490f544388dd24c0d054a96dd304bc7284450:
>>
>> Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200703' into staging (2020-07-04 16:08:41 +0100)
>>
>> are available in the Git repository at:
>>
>> https://github.com/stsquad/qemu.git tags/pull-testing-and-misc-070720-1
>>
>> for you to fetch changes up to 6a726e8ca0286e3ed69945abd447099f6f6a903c:
>>
>> tests/qht-bench: Adjust threshold computation (2020-07-07 07:57:41 +0100)
>>
>> ----------------------------------------------------------------
>> Testing and build updates:
>>
>> - tests/vm support for aarch64 VMs
>> - tests/tcg better cross-compiler detection
>> - update docker tooling to support registries
>> - gitlab build docker images and store in registry
>> - gitlab use docker images for builds
>> - a number of skipIf updates to support move
>> - linux-user MAP_FIXED_NOREPLACE fix
>> - qht-bench compiler tweaks
>> - configure fix for secret keyring
>> - tsan fiber annotation clean-up
[...]
> Also a compile failure on s390x, but since this isn't related
> to changes you made afaict I wonder if it's the result of
> a change in the build environment:
> /home/ubuntu/qemu/block/ssh.c: In function ‘check_host_key_knownhosts’:
> /home/ubuntu/qemu/block/ssh.c:281:28: error: storage size of ‘state’ isn’t known
> enum ssh_known_hosts_e state;
> ^~~~~
> /home/ubuntu/qemu/block/ssh.c:289:13: error: implicit declaration of
> function ‘ssh_session_is_known_server’ [-Werror=implicit-funct
> ion-declaration]
> state = ssh_session_is_known_server(s->session);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> [and other errors]
libssh is bugged on Ubuntu 18.04.
https://bugs.launchpad.net/qemu/+bug/1838763
We need to use 'configure --disable-libssh' there.
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PULL 00/41] testing updates (vm, gitlab, misc build fixes)
2020-07-09 11:31 ` Peter Maydell
2020-07-09 12:24 ` Philippe Mathieu-Daudé
@ 2020-07-09 15:46 ` Alex Bennée
1 sibling, 0 replies; 56+ messages in thread
From: Alex Bennée @ 2020-07-09 15:46 UTC (permalink / raw)
To: Peter Maydell; +Cc: QEMU Developers
Peter Maydell <peter.maydell@linaro.org> writes:
> On Tue, 7 Jul 2020 at 08:09, Alex Bennée <alex.bennee@linaro.org> wrote:
>>
>> There will be some docker failures until the official repository has
>> seeded but local builds should continue to work.
>>
>> ----
>>
>> The following changes since commit eb6490f544388dd24c0d054a96dd304bc7284450:
>>
>> Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200703' into staging (2020-07-04 16:08:41 +0100)
>>
>> are available in the Git repository at:
>>
>> https://github.com/stsquad/qemu.git tags/pull-testing-and-misc-070720-1
>>
>> for you to fetch changes up to 6a726e8ca0286e3ed69945abd447099f6f6a903c:
>>
>> tests/qht-bench: Adjust threshold computation (2020-07-07 07:57:41 +0100)
>>
>> ----------------------------------------------------------------
>> Testing and build updates:
>>
>> - tests/vm support for aarch64 VMs
>> - tests/tcg better cross-compiler detection
>> - update docker tooling to support registries
>> - gitlab build docker images and store in registry
>> - gitlab use docker images for builds
>> - a number of skipIf updates to support move
>> - linux-user MAP_FIXED_NOREPLACE fix
>> - qht-bench compiler tweaks
>> - configure fix for secret keyring
>> - tsan fiber annotation clean-up
>
> freebsd failed:
>
<snip>
>
> con recv: set console=comconso
>
> Failed to prepare guest environment
> Traceback (most recent call last):
> File "/home/peter.maydell/qemu-freebsd/tests/vm/basevm.py", line 628, in main
> return vm.build_image(args.image)
> File "/home/peter.maydell/qemu-freebsd/tests/vm/freebsd", line 163,
> in build_image
> self.console_boot_serial()
> File "/home/peter.maydell/qemu-freebsd/tests/vm/freebsd", line 76,
> in console_boot_serial
> self.console_wait_send("OK", "boot\n")
> File "/home/peter.maydell/qemu-freebsd/tests/vm/basevm.py", line
> 400, in console_wait_send
> self.console_wait(wait)
> File "/home/peter.maydell/qemu-freebsd/tests/vm/basevm.py", line
> 340, in console_wait
> chars = vm.console_socket.recv(1)
> File "/home/peter.maydell/qemu-freebsd/tests/vm/../../python/qemu/console_socket.py",
> line 96, in recv
> raise socket.timeout
> socket.timeout
Hmm works for me, but I'm guessing you have V=1?
> NetBSD failed:
> con recv: postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db)
> con recv: Starting inetd.
> con recv: Starting cron.
> con recv: Thu Jul 9 10:40:07 UTC 2020
> con recv: NetBSD/amd64 (localhost) (constty)
> con recv: login:
> con send: qemu<enter>
> con recv: Jul 9 10:40:09 localhost getty[756]: /dev/ttyE2: Device
> not configured
> con recv: Jul 9 10:40:09 localhost getty[703]: /dev/ttyE3: Device not
> configured
> con recv: Jul 9 10:40:09 localhost getty[753]: /dev/ttyE1: Device not
> configured
> con recv: qemu
> con recv: Password:
> con send: qemupass<enter>
> con recv: Login incorrect or refused on this terminal.
> console: *** read timeout ***
> console: waiting for: 'localhost$'
> console: line buffer:
>
> con recv: login:
>
> Failed to prepare guest environment
> Traceback (most recent call last):
> File "/home/peter.maydell/qemu-netbsd/tests/vm/basevm.py", line 628, in main
> return vm.build_image(args.image)
> File "/home/peter.maydell/qemu-netbsd/tests/vm/netbsd", line 174, in
> build_image
> self._config["guest_pass"])
> File "/home/peter.maydell/qemu-netbsd/tests/vm/basevm.py", line 408,
> in console_ssh_init
> self.console_wait_send(prompt, "mkdir .ssh\n")
> File "/home/peter.maydell/qemu-netbsd/tests/vm/basevm.py", line 400,
> in console_wait_send
> self.console_wait(wait)
> File "/home/peter.maydell/qemu-netbsd/tests/vm/basevm.py", line 340,
> in console_wait
> chars = vm.console_socket.recv(1)
> File "/home/peter.maydell/qemu-netbsd/tests/vm/../../python/qemu/console_socket.py",
> line 96, in recv
> raise socket.timeout
> socket.timeout
OK that I can replicate. So it looks like our console bypass has an
issue. I'll dig into it.
> arm-linux-static check-tcg failed:
> TEST pauth-4 on aarch64
> TEST semihosting on aarch64
> SKIPPED semiconsole on aarch64 because MANUAL ONLY
> TEST basic gdbstub support
> /tmp/tmp6ftb0v61qemu-gdbstub/gdbstub.socket: No such device or address.
> SKIPPING (not connected)
> BUILD TCG tests for aarch64_be-linux-user
> BUILD aarch64_be-linux-user guest-tests SKIPPED
> RUN TCG tests for aarch64_be-linux-user
> RUN tests for aarch64_be-linux-user SKIPPED
> make: Entering directory
> '/home/petmay01/linaro/qemu-for-merges/build/all-linux-static'
> BUILD debian10
> Error response from daemon: manifest for
> registry.gitlab.com/qemu-project/qemu/qemu/debian10:latest not found
> make: Leaving directory
> '/home/petmay01/linaro/qemu-for-merges/build/all-linux-static'
> make: Entering directory
> '/home/petmay01/linaro/qemu-for-merges/build/all-linux-static'
> BUILD debian-alpha-cross
> Error response from daemon: manifest for
> registry.gitlab.com/qemu-project/qemu/qemu/debian-alpha-cross:latest
> not found
> registry.gitlab.com/qemu-project/qemu/qemu/debian10:latest not found
> Traceback (most recent call last):
> File "/home/petmay01/linaro/qemu-for-merges/tests/docker/docker.py",
> line 701, in <module>
> sys.exit(main())
> File "/home/petmay01/linaro/qemu-for-merges/tests/docker/docker.py",
> line 697, in main
> return args.cmdobj.run(args, argv)
> File "/home/petmay01/linaro/qemu-for-merges/tests/docker/docker.py",
> line 494, in run
> extra_files_cksum=cksum)
> File "/home/petmay01/linaro/qemu-for-merges/tests/docker/docker.py",
> line 347, in build_image
> quiet=quiet)
> File "/home/petmay01/linaro/qemu-for-merges/tests/docker/docker.py",
> line 244, in _do_check
> return subprocess.check_call(self._command + cmd, **kwargs)
> File "/usr/lib/python3.6/subprocess.py", line 311, in check_call
> raise CalledProcessError(retcode, cmd)
> subprocess.CalledProcessError: Command '['docker', 'build', '-t',
> 'qemu/debian-alpha-cross', '-f',
> '/tmp/docker_buildsstz1jcy/tmp_7c70xjh.docker', '--build-arg',
> 'BUILDKIT_INLINE_CACHE=1', '--cache-from',
> 'registry.gitlab.com/qemu-project/qemu/qemu/debian-alpha-cross',
> '/tmp/docker_buildsstz1jcy']' returned non-zero exit status 1.
> /home/petmay01/linaro/qemu-for-merges/tests/docker/Makefile.include:58:
> recipe for target 'docker-image-debian-alpha-cross' failed
> make: *** [docker-image-debian-alpha-cross] Error 1
This is it tripping up on missing registry (as I switched the registry
from my previous patch posts to point to the "official" gitlab). You can
work around this for now by passing:
make check-tcg REGISTRY=registry.gitlab.com/stsquad/qemu
I also just posted:
Subject: [PATCH v1 11/13] tests/docker: fall back more gracefully when pull fails
Date: Thu, 9 Jul 2020 15:13:25 +0100
Message-Id: <20200709141327.14631-12-alex.bennee@linaro.org>
Maybe I should just squash it into:
tests/docker: add --registry support to tooling
?
> Also a compile failure on s390x, but since this isn't related
> to changes you made afaict I wonder if it's the result of
> a change in the build environment:
> /home/ubuntu/qemu/block/ssh.c: In function ‘check_host_key_knownhosts’:
> /home/ubuntu/qemu/block/ssh.c:281:28: error: storage size of ‘state’ isn’t known
> enum ssh_known_hosts_e state;
> ^~~~~
> /home/ubuntu/qemu/block/ssh.c:289:13: error: implicit declaration of
> function ‘ssh_session_is_known_server’ [-Werror=implicit-funct
> ion-declaration]
> state = ssh_session_is_known_server(s->session);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> [and other errors]
As Philippe said I don't think this was me.
--
Alex Bennée
^ permalink raw reply [flat|nested] 56+ messages in thread