From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
qemu-devel@nongnu.org
Subject: Re: [PATCH RFC 22/22] i386: expand Hyper-V features early
Date: Tue, 22 Sep 2020 12:33:41 +0200 [thread overview]
Message-ID: <87blhyf6d6.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20200918223820.GK57321@habkost.net>
Eduardo Habkost <ehabkost@redhat.com> writes:
> On Fri, Sep 04, 2020 at 04:54:31PM +0200, Vitaly Kuznetsov wrote:
>> To make Hyper-V features appear in e.g. QMP query-cpu-model-expansion we
>> need to expand and set the corresponding CPUID leaves early. Modify
>> x86_cpu_get_supported_feature_word() to call newly intoduced Hyper-V
>> specific kvm_hv_get_supported_cpuid() instead of
>> kvm_arch_get_supported_cpuid(). We can't use kvm_arch_get_supported_cpuid()
>> as Hyper-V specific CPUID leaves intersect with KVM's.
>>
>> Note, early expansion will only happen when KVM supports system wide
>> KVM_GET_SUPPORTED_HV_CPUID ioctl (KVM_CAP_SYS_HYPERV_CPUID).
>
> Will this implicitly enable hyperv CPUID passthrough when using
> "-cpu host"? Do we want it to?
>
I hope it won't. With 'hv_*' features set explicitly we will get just
them (if the host supports), with 'hv_passthrough' we will get
everything supported by the host. With no 'hv_*' parameters on the
command line we should get no Hyper-V features. I'll check this.
Personally, I don't think '-host' mode should enable any Hyper-V
features as these features have side-effects. E.g. if you enable SynIC
you won't be able to use vAPIC. Probably not a reasonable default for
the majority of the guests which (hopefully) are Linux.
>>
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
>> ---
>> target/i386/cpu.c | 15 +++++++++------
>> target/i386/kvm.c | 15 +++++++++++++++
>> target/i386/kvm_i386.h | 7 +++++++
>> 3 files changed, 31 insertions(+), 6 deletions(-)
>>
>> diff --git a/target/i386/cpu.c b/target/i386/cpu.c
>> index 479c4bbbf459..d3c4ecb3535c 100644
>> --- a/target/i386/cpu.c
>> +++ b/target/i386/cpu.c
>> @@ -5147,7 +5147,7 @@ CpuDefinitionInfoList *qmp_query_cpu_definitions(Error **errp)
>> return cpu_list;
>> }
>>
>> -static uint64_t x86_cpu_get_supported_feature_word(FeatureWord w,
>> +static uint64_t x86_cpu_get_supported_feature_word(X86CPU *cpu, FeatureWord w,
>> bool migratable_only)
>> {
>> FeatureWordInfo *wi = &feature_word_info[w];
>> @@ -5156,9 +5156,12 @@ static uint64_t x86_cpu_get_supported_feature_word(FeatureWord w,
>> if (kvm_enabled()) {
>> switch (wi->type) {
>> case CPUID_FEATURE_WORD:
>> - r = kvm_arch_get_supported_cpuid(kvm_state, wi->cpuid.eax,
>> - wi->cpuid.ecx,
>> - wi->cpuid.reg);
>> + if (hyperv_feature_word(w))
>> + r = kvm_hv_get_supported_cpuid(cpu, w);
>> + else
>> + r = kvm_arch_get_supported_cpuid(kvm_state, wi->cpuid.eax,
>> + wi->cpuid.ecx,
>> + wi->cpuid.reg);
>> break;
>> case MSR_FEATURE_WORD:
>> r = kvm_arch_get_supported_msr_feature(kvm_state,
>> @@ -6485,7 +6488,7 @@ static void x86_cpu_expand_features(X86CPU *cpu, Error **errp)
>> * by the user.
>> */
>> env->features[w] |=
>> - x86_cpu_get_supported_feature_word(w, cpu->migratable) &
>> + x86_cpu_get_supported_feature_word(cpu, w, cpu->migratable) &
>> ~env->user_features[w] &
>> ~feature_word_info[w].no_autoenable_flags;
>> }
>> @@ -6589,7 +6592,7 @@ static void x86_cpu_filter_features(X86CPU *cpu, bool verbose)
>>
>> for (w = 0; w < FEATURE_WORDS; w++) {
>> uint64_t host_feat =
>> - x86_cpu_get_supported_feature_word(w, false);
>> + x86_cpu_get_supported_feature_word(cpu, w, false);
>> uint64_t requested_features = env->features[w];
>> uint64_t unavailable_features = requested_features & ~host_feat;
>> mark_unavailable_features(cpu, w, unavailable_features, prefix);
>> diff --git a/target/i386/kvm.c b/target/i386/kvm.c
>> index 961241528a5c..764b96fbbb7d 100644
>> --- a/target/i386/kvm.c
>> +++ b/target/i386/kvm.c
>> @@ -1449,6 +1449,21 @@ static int hyperv_fill_cpuids(CPUState *cs,
>> return cpuid_i;
>> }
>>
>> +uint32_t kvm_hv_get_supported_cpuid(X86CPU *cpu, enum FeatureWord w)
>> +{
>> + CPUState *cs = CPU(cpu);
>> + CPUX86State *env = &cpu->env;
>> + Error *local_err = NULL;
>> +
>> + hyperv_expand_features(cs, &local_err);
>> +
>> + if (local_err) {
>> + error_report_err(local_err);
>> + }
>> +
>> + return env->features[w];
>> +}
>> +
>> static Error *hv_passthrough_mig_blocker;
>> static Error *hv_no_nonarch_cs_mig_blocker;
>>
>> diff --git a/target/i386/kvm_i386.h b/target/i386/kvm_i386.h
>> index 064b8798a26c..2e7da4f39668 100644
>> --- a/target/i386/kvm_i386.h
>> +++ b/target/i386/kvm_i386.h
>> @@ -48,4 +48,11 @@ bool kvm_has_waitpkg(void);
>>
>> bool kvm_hv_vpindex_settable(void);
>>
>> +static inline bool hyperv_feature_word(enum FeatureWord w)
>> +{
>> + return w >= FEAT_HYPERV_EAX && w <= FEAT_HV_NESTED_EDX;
>> +}
>> +
>> +uint32_t kvm_hv_get_supported_cpuid(X86CPU *cpu, enum FeatureWord w);
>> +
>> #endif
>> --
>> 2.25.4
>>
--
Vitaly
next prev parent reply other threads:[~2020-09-22 10:46 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-04 14:54 [PATCH RFC 00/22] i386: KVM: expand Hyper-V features early Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 01/22] WIP: update linux/headers Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 02/22] i386: drop x86_cpu_get_supported_feature_word() forward declaration Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 03/22] i386: move hyperv_vendor_id initialization to x86_cpu_realizefn() Vitaly Kuznetsov
2020-09-18 22:14 ` Eduardo Habkost
2020-09-22 10:23 ` Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 04/22] i386: move hyperv_interface_id " Vitaly Kuznetsov
2020-09-18 22:23 ` Eduardo Habkost
2020-09-04 14:54 ` [PATCH RFC 05/22] i386: move hyperv_version_id " Vitaly Kuznetsov
2020-09-18 22:15 ` Eduardo Habkost
2020-09-04 14:54 ` [PATCH RFC 06/22] i386: move hyperv_limits " Vitaly Kuznetsov
2020-09-18 22:16 ` Eduardo Habkost
2020-09-04 14:54 ` [PATCH RFC 07/22] i386: fill in FEAT_HYPERV_EDX from edx instead of eax Vitaly Kuznetsov
2020-09-18 22:21 ` Eduardo Habkost
2020-09-04 14:54 ` [PATCH RFC 08/22] i386: invert hyperv_spinlock_attempts setting logic with hv_passthrough Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 09/22] i386: add reserved FEAT_HYPERV_ECX CPUID leaf Vitaly Kuznetsov
2020-09-18 22:25 ` Eduardo Habkost
2020-09-22 10:27 ` Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 10/22] i386: add reserved FEAT_HV_RECOMM_ECX/FEAT_HV_RECOMM_EDX CPUID leaves Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 11/22] i386: add reserved FEAT_HV_NESTED_EBX/ECX/EDX " Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 12/22] i386: always fill Hyper-V CPUID feature leaves from X86CPU data Vitaly Kuznetsov
2020-09-18 22:32 ` Eduardo Habkost
2020-09-22 10:30 ` Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 13/22] i386: split hyperv_handle_properties() into hyperv_expand_features()/hyperv_fill_cpuids() Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 14/22] i386: move eVMCS enablement to hyperv_init_vcpu() Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 15/22] i386: switch hyperv_expand_features() to using error_setg() Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 16/22] i386: make hyperv_expand_features() return void Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 17/22] i386: adjust the expected KVM_GET_SUPPORTED_HV_CPUID array size Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 18/22] i386: prefer system KVM_GET_SUPPORTED_HV_CPUID ioctl over vCPU's one Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 19/22] i386: prepare hyperv_expand_features() to be called at CPU feature expansion time Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 20/22] i386: use global kvm_state in hyperv_enabled() check Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 21/22] i386: record if Hyper-V features were already expanded Vitaly Kuznetsov
2020-09-04 14:54 ` [PATCH RFC 22/22] i386: expand Hyper-V features early Vitaly Kuznetsov
2020-09-18 22:38 ` Eduardo Habkost
2020-09-22 10:33 ` Vitaly Kuznetsov [this message]
2020-09-18 22:47 ` Eduardo Habkost
2020-09-22 10:37 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87blhyf6d6.fsf@vitty.brq.redhat.com \
--to=vkuznets@redhat.com \
--cc=ehabkost@redhat.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).