From: "Alex Bennée" <alex.bennee@linaro.org>
To: Emilio Cota <cota@braap.org>
Cc: qemu-devel@nongnu.org, "Paolo Bonzini" <pbonzini@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Richard Henderson" <richard.henderson@linaro.org>
Subject: Re: [PATCH v2 4/5] util/qht: use striped locks under TSAN
Date: Tue, 10 Jan 2023 20:58:01 +0000 [thread overview]
Message-ID: <87cz7mm7fu.fsf@linaro.org> (raw)
In-Reply-To: <20230109224954.161672-5-cota@braap.org>
Emilio Cota <cota@braap.org> writes:
> Fixes this tsan crash, easy to reproduce with any large enough program:
>
> $ tests/unit/test-qht
> 1..2
> ThreadSanitizer: CHECK failed: sanitizer_deadlock_detector.h:67 "((n_all_locks_)) < (((sizeof(all_locks_with_contexts_)/sizeof((all_locks_with_contexts_)[0]))))" (0x40, 0x40) (tid=1821568)
> #0 __tsan::CheckUnwind() ../../../../src/libsanitizer/tsan/tsan_rtl.cpp:353 (libtsan.so.2+0x90034)
> #1 __sanitizer::CheckFailed(char const*, int, char const*, unsigned long long, unsigned long long) ../../../../src/libsanitizer/sanitizer_common/sanitizer_termination.cpp:86 (libtsan.so.2+0xca555)
> #2 __sanitizer::DeadlockDetectorTLS<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >::addLock(unsigned long, unsigned long, unsigned int) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector.h:67 (libtsan.so.2+0xb3616)
> #3 __sanitizer::DeadlockDetectorTLS<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >::addLock(unsigned long, unsigned long, unsigned int) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector.h:59 (libtsan.so.2+0xb3616)
> #4 __sanitizer::DeadlockDetector<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >::onLockAfter(__sanitizer::DeadlockDetectorTLS<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >*, unsigned long, unsigned int) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector.h:216 (libtsan.so.2+0xb3616)
> #5 __sanitizer::DD::MutexAfterLock(__sanitizer::DDCallback*, __sanitizer::DDMutex*, bool, bool) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector1.cpp:169 (libtsan.so.2+0xb3616)
> #6 __tsan::MutexPostLock(__tsan::ThreadState*, unsigned long, unsigned long, unsigned int, int) ../../../../src/libsanitizer/tsan/tsan_rtl_mutex.cpp:200 (libtsan.so.2+0xa3382)
> #7 __tsan_mutex_post_lock ../../../../src/libsanitizer/tsan/tsan_interface_ann.cpp:384 (libtsan.so.2+0x76bc3)
> #8 qemu_spin_lock /home/cota/src/qemu/include/qemu/thread.h:259 (test-qht+0x44a97)
> #9 qht_map_lock_buckets ../util/qht.c:253 (test-qht+0x44a97)
> #10 do_qht_iter ../util/qht.c:809 (test-qht+0x45f33)
> #11 qht_iter ../util/qht.c:821 (test-qht+0x45f33)
> #12 iter_check ../tests/unit/test-qht.c:121 (test-qht+0xe473)
> #13 qht_do_test ../tests/unit/test-qht.c:202 (test-qht+0xe473)
> #14 qht_test ../tests/unit/test-qht.c:240 (test-qht+0xe7c1)
> #15 test_default ../tests/unit/test-qht.c:246 (test-qht+0xe828)
> #16 <null> <null> (libglib-2.0.so.0+0x7daed)
> #17 <null> <null> (libglib-2.0.so.0+0x7d80a)
> #18 <null> <null> (libglib-2.0.so.0+0x7d80a)
> #19 g_test_run_suite <null> (libglib-2.0.so.0+0x7dfe9)
> #20 g_test_run <null> (libglib-2.0.so.0+0x7e055)
> #21 main ../tests/unit/test-qht.c:259 (test-qht+0xd2c6)
> #22 __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 (libc.so.6+0x29d8f)
> #23 __libc_start_main_impl ../csu/libc-start.c:392 (libc.so.6+0x29e3f)
> #24 _start <null> (test-qht+0xdb44)
>
> Signed-off-by: Emilio Cota <cota@braap.org>
> ---
> util/qht.c | 101 +++++++++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 87 insertions(+), 14 deletions(-)
>
> diff --git a/util/qht.c b/util/qht.c
> index 15866299e6..70cc733d5d 100644
> --- a/util/qht.c
> +++ b/util/qht.c
> @@ -151,6 +151,22 @@ struct qht_bucket {
>
> QEMU_BUILD_BUG_ON(sizeof(struct qht_bucket) > QHT_BUCKET_ALIGN);
>
> +/*
> + * Under TSAN, we use striped locks instead of one lock per bucket chain.
> + * This avoids crashing under TSAN, since TSAN aborts the program if more than
> + * 64 locks are held (this is a hardcoded limit in TSAN).
> + * When resizing a QHT we grab all the buckets' locks, which can easily
> + * go over TSAN's limit. By using striped locks, we avoid this problem.
> + *
> + * Note: this number must be a power of two for easy index computation.
> + */
> +#define QHT_TSAN_BUCKET_LOCKS_BITS 4
> +#define QHT_TSAN_BUCKET_LOCKS (1 << QHT_TSAN_BUCKET_LOCKS_BITS)
> +
> +struct qht_tsan_lock {
> + QemuSpin lock;
> +} QEMU_ALIGNED(QHT_BUCKET_ALIGN);
> +
> /**
> * struct qht_map - structure to track an array of buckets
> * @rcu: used by RCU. Keep it as the top field in the struct to help valgrind
> @@ -160,6 +176,7 @@ QEMU_BUILD_BUG_ON(sizeof(struct qht_bucket) > QHT_BUCKET_ALIGN);
> * @n_added_buckets: number of added (i.e. "non-head") buckets
> * @n_added_buckets_threshold: threshold to trigger an upward resize once the
> * number of added buckets surpasses it.
> + * @tsan_bucket_locks: Array of striped locks to be used only under TSAN.
> *
> * Buckets are tracked in what we call a "map", i.e. this structure.
> */
> @@ -169,6 +186,9 @@ struct qht_map {
> size_t n_buckets;
> size_t n_added_buckets;
> size_t n_added_buckets_threshold;
> +#ifdef CONFIG_TSAN
> + struct qht_tsan_lock tsan_bucket_locks[QHT_TSAN_BUCKET_LOCKS];
> +#endif
> };
>
> /* trigger a resize when n_added_buckets > n_buckets / div */
> @@ -229,10 +249,62 @@ static inline size_t qht_elems_to_buckets(size_t n_elems)
> return pow2ceil(n_elems / QHT_BUCKET_ENTRIES);
> }
>
> -static inline void qht_head_init(struct qht_bucket *b)
> +/*
> + * When using striped locks (i.e. under TSAN), we have to be careful not
> + * to operate on the same lock twice (e.g. when iterating through all buckets).
> + * We achieve this by operating only on each stripe's first matching lock.
> + */
> +static inline void qht_do_if_first_in_stripe(const struct qht_map *map,
> + struct qht_bucket *b,
> + void (*func)(QemuSpin *spin))
> +{
> +#ifdef CONFIG_TSAN
> + unsigned long bucket_idx = b - map->buckets;
> + bool is_first_in_stripe = (bucket_idx >> QHT_TSAN_BUCKET_LOCKS_BITS) == 0;
> + if (is_first_in_stripe) {
> + unsigned long lock_idx = bucket_idx & (QHT_TSAN_BUCKET_LOCKS - 1);
> + func(&map->tsan_bucket_locks[lock_idx]);
Hmm I ran into an issue with:
../util/qht.c:286:10: error: incompatible pointer types passing 'const struct qht_tsan_lock *' to parameter of type 'QemuSpin *' (aka 'struct QemuSpin *') [-Werror,-Wincompatible-pointer-types]
func(&map->tsan_bucket_locks[lock_idx]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
But changing the line to:
func(&map->tsan_bucket_locks[lock_idx].lock);
still fails because:
../../util/qht.c:266:14: error: passing 'const QemuSpin *' (aka 'const struct QemuSpin *') to parameter of type 'QemuSpin *' (aka 'struct QemuSpin *') discards qualifiers [\
-Werror,-Wincompatible-pointer-types-discards-qualifiers]
func(&map->tsan_bucket_locks[lock_idx].lock);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + }
> +#else
> + func(&b->lock);
> +#endif
> +}
> +
> +static inline void qht_bucket_lock_destroy(const struct qht_map *map,
> + struct qht_bucket *b)
> +{
> + qht_do_if_first_in_stripe(map, b, qemu_spin_destroy);
> +}
Who is meant to be calling this?
> +
> +static inline void qht_bucket_lock_do(const struct qht_map *map,
> + struct qht_bucket *b,
> + void (*func)(QemuSpin *lock))
> +{
> +#ifdef CONFIG_TSAN
> + unsigned long bucket_idx = b - map->buckets;
> + unsigned long lock_idx = bucket_idx & (QHT_TSAN_BUCKET_LOCKS - 1);
> + func(&map->tsan_bucket_locks[lock_idx]);
> +#else
> + func(&b->lock);
> +#endif
> +}
> +
> +static inline void qht_bucket_lock(const struct qht_map *map,
> + struct qht_bucket *b)
> +{
> + qht_bucket_lock_do(map, b, qemu_spin_lock);
> +}
> +
> +static inline void qht_bucket_unlock(const struct qht_map *map,
> + struct qht_bucket *b)
> +{
> + qht_bucket_lock_do(map, b, qemu_spin_unlock);
> +}
> +
> +static inline void qht_head_init(struct qht_map *map, struct qht_bucket *b)
> {
> memset(b, 0, sizeof(*b));
> - qemu_spin_init(&b->lock);
> + qht_do_if_first_in_stripe(map, b, qemu_spin_init);
> seqlock_init(&b->sequence);
> }
>
> @@ -250,7 +322,7 @@ static void qht_map_lock_buckets(struct qht_map *map)
> for (i = 0; i < map->n_buckets; i++) {
> struct qht_bucket *b = &map->buckets[i];
>
> - qemu_spin_lock(&b->lock);
> + qht_do_if_first_in_stripe(map, b, qemu_spin_lock);
> }
> }
>
> @@ -261,7 +333,7 @@ static void qht_map_unlock_buckets(struct qht_map *map)
> for (i = 0; i < map->n_buckets; i++) {
> struct qht_bucket *b = &map->buckets[i];
>
> - qemu_spin_unlock(&b->lock);
> + qht_do_if_first_in_stripe(map, b, qemu_spin_unlock);
> }
> }
>
> @@ -308,7 +380,7 @@ void qht_map_lock_buckets__no_stale(struct qht *ht, struct qht_map **pmap)
> * Get a head bucket and lock it, making sure its parent map is not stale.
> * @pmap is filled with a pointer to the bucket's parent map.
> *
> - * Unlock with qemu_spin_unlock(&b->lock).
> + * Unlock with qht_bucket_unlock.
> *
> * Note: callers cannot have ht->lock held.
> */
> @@ -322,18 +394,18 @@ struct qht_bucket *qht_bucket_lock__no_stale(struct qht *ht, uint32_t hash,
> map = qatomic_rcu_read(&ht->map);
> b = qht_map_to_bucket(map, hash);
>
> - qemu_spin_lock(&b->lock);
> + qht_bucket_lock(map, b);
> if (likely(!qht_map_is_stale__locked(ht, map))) {
> *pmap = map;
> return b;
> }
> - qemu_spin_unlock(&b->lock);
> + qht_bucket_unlock(map, b);
>
> /* we raced with a resize; acquire ht->lock to see the updated ht->map */
> qht_lock(ht);
> map = ht->map;
> b = qht_map_to_bucket(map, hash);
> - qemu_spin_lock(&b->lock);
> + qht_bucket_lock(map, b);
> qht_unlock(ht);
> *pmap = map;
> return b;
> @@ -345,12 +417,13 @@ static inline bool qht_map_needs_resize(const struct qht_map *map)
> map->n_added_buckets_threshold;
> }
>
> -static inline void qht_chain_destroy(const struct qht_bucket *head)
> +static inline void qht_chain_destroy(const struct qht_map *map,
> + struct qht_bucket *head)
> {
> struct qht_bucket *curr = head->next;
> struct qht_bucket *prev;
>
> - qemu_spin_destroy(&head->lock);
> + qht_do_if_first_in_stripe(map, head, qemu_spin_destroy);
> while (curr) {
> prev = curr;
> curr = curr->next;
> @@ -364,7 +437,7 @@ static void qht_map_destroy(struct qht_map *map)
> size_t i;
>
> for (i = 0; i < map->n_buckets; i++) {
> - qht_chain_destroy(&map->buckets[i]);
> + qht_chain_destroy(map, &map->buckets[i]);
> }
> qemu_vfree(map->buckets);
> g_free(map);
> @@ -390,7 +463,7 @@ static struct qht_map *qht_map_create(size_t n_buckets)
> map->buckets = qemu_memalign(QHT_BUCKET_ALIGN,
> sizeof(*map->buckets) * n_buckets);
> for (i = 0; i < n_buckets; i++) {
> - qht_head_init(&map->buckets[i]);
> + qht_head_init(map, &map->buckets[i]);
> }
> return map;
> }
> @@ -638,7 +711,7 @@ bool qht_insert(struct qht *ht, void *p, uint32_t hash, void **existing)
> b = qht_bucket_lock__no_stale(ht, hash, &map);
> prev = qht_insert__locked(ht, map, b, p, hash, &needs_resize);
> qht_bucket_debug__locked(b);
> - qemu_spin_unlock(&b->lock);
> + qht_bucket_unlock(map, b);
>
> if (unlikely(needs_resize) && ht->mode & QHT_MODE_AUTO_RESIZE) {
> qht_grow_maybe(ht);
> @@ -749,7 +822,7 @@ bool qht_remove(struct qht *ht, const void *p, uint32_t hash)
> b = qht_bucket_lock__no_stale(ht, hash, &map);
> ret = qht_remove__locked(b, p, hash);
> qht_bucket_debug__locked(b);
> - qemu_spin_unlock(&b->lock);
> + qht_bucket_unlock(map, b);
> return ret;
> }
--
Alex Bennée
Virtualisation Tech Lead @ Linaro
next prev parent reply other threads:[~2023-01-10 21:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-09 22:49 [PATCH v2 0/5] tsan fixes Emilio Cota
2023-01-09 22:49 ` [PATCH v2 1/5] cpu: free cpu->tb_jmp_cache with RCU Emilio Cota
2023-01-09 22:49 ` [PATCH v2 2/5] util/qht: add missing atomic_set(hashes[i]) Emilio Cota
2023-01-10 9:08 ` Alex Bennée
2023-01-09 22:49 ` [PATCH v2 3/5] thread: de-const qemu_spin_destroy Emilio Cota
2023-01-10 9:09 ` Alex Bennée
2023-01-09 22:49 ` [PATCH v2 4/5] util/qht: use striped locks under TSAN Emilio Cota
2023-01-10 20:58 ` Alex Bennée [this message]
2023-01-11 2:41 ` Emilio Cota
2023-01-11 13:03 ` Alex Bennée
2023-01-09 22:49 ` [PATCH v2 5/5] plugins: make qemu_plugin_user_exit's locking order consistent with fork_start's Emilio Cota
2023-01-10 7:31 ` Philippe Mathieu-Daudé
2023-01-10 12:55 ` [PATCH v2 0/5] tsan fixes Alex Bennée
2023-01-10 15:50 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87cz7mm7fu.fsf@linaro.org \
--to=alex.bennee@linaro.org \
--cc=cota@braap.org \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).