* [PATCH 1/5] hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus()
2020-06-29 17:38 [PATCH 0/5] hw/i2c: Rename method names for consistency and add documentation Philippe Mathieu-Daudé
@ 2020-06-29 17:38 ` Philippe Mathieu-Daudé
2020-06-30 9:28 ` Markus Armbruster
2020-07-13 12:23 ` Cédric Le Goater
2020-06-29 17:38 ` [PATCH 2/5] hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new() Philippe Mathieu-Daudé
` (4 subsequent siblings)
5 siblings, 2 replies; 22+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 17:38 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Philippe Mathieu-Daudé, Corey Minyard,
Andrew Jeffery, Markus Armbruster, Cédric Le Goater,
qemu-arm, qemu-ppc, Joel Stanley, Jan Kiszka, David Gibson
Simplify aspeed_i2c_get_bus() by using a AspeedI2CState argument.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/i2c/aspeed_i2c.h | 2 +-
hw/arm/aspeed.c | 70 ++++++++++++++++++-------------------
hw/i2c/aspeed_i2c.c | 3 +-
3 files changed, 37 insertions(+), 38 deletions(-)
diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
index f1b9e5bf91..243789ae5d 100644
--- a/include/hw/i2c/aspeed_i2c.h
+++ b/include/hw/i2c/aspeed_i2c.h
@@ -93,6 +93,6 @@ typedef struct AspeedI2CClass {
} AspeedI2CClass;
-I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr);
+I2CBus *aspeed_i2c_get_bus(AspeedI2CState *s, int busnr);
#endif /* ASPEED_I2C_H */
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 379f9672a5..1285bf82c0 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -385,13 +385,13 @@ static void palmetto_bmc_i2c_init(AspeedMachineState *bmc)
/* The palmetto platform expects a ds3231 RTC but a ds1338 is
* enough to provide basic RTC features. Alarms will be missing */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68);
- smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), 0x50,
+ smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50,
eeprom_buf);
/* add a TMP423 temperature sensor */
- dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2),
+ dev = i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2),
"tmp423", 0x4c);
object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort);
object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort);
@@ -404,16 +404,16 @@ static void ast2500_evb_i2c_init(AspeedMachineState *bmc)
AspeedSoCState *soc = &bmc->soc;
uint8_t *eeprom_buf = g_malloc0(8 * 1024);
- smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), 0x50,
+ smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 3), 0x50,
eeprom_buf);
/* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7),
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7),
TYPE_TMP105, 0x4d);
/* The AST2500 EVB does not have an RTC. Let's pretend that one is
* plugged on the I2C bus header */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
}
static void ast2600_evb_i2c_init(AspeedMachineState *bmc)
@@ -428,36 +428,36 @@ static void romulus_bmc_i2c_init(AspeedMachineState *bmc)
/* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is
* good enough */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
}
static void swift_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60);
/* The swift board expects a TMP275 but a TMP105 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48);
/* The swift board expects a pca9551 but a pca9552 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60);
/* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c);
/* The swift board expects a pca9539 but a pca9552 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74);
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c);
/* The swift board expects a pca9539 but a pca9552 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552",
0x74);
/* The swift board expects a TMP275 but a TMP105 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a);
}
static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
@@ -465,32 +465,32 @@ static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
AspeedSoCState *soc = &bmc->soc;
/* bus 2 : */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2), "tmp105", 0x48);
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2), "tmp105", 0x49);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49);
/* bus 2 : pca9546 @ 0x73 */
/* bus 3 : pca9548 @ 0x70 */
/* bus 4 : */
uint8_t *eeprom4_54 = g_malloc0(8 * 1024);
- smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), 0x54,
+ smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54,
eeprom4_54);
/* PCA9539 @ 0x76, but PCA9552 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "pca9552", 0x76);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76);
/* PCA9539 @ 0x77, but PCA9552 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "pca9552", 0x77);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77);
/* bus 6 : */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 6), "tmp105", 0x48);
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 6), "tmp105", 0x49);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49);
/* bus 6 : pca9546 @ 0x73 */
/* bus 8 : */
uint8_t *eeprom8_56 = g_malloc0(8 * 1024);
- smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), 0x56,
+ smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56,
eeprom8_56);
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x61);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
/* bus 8 : adc128d818 @ 0x1d */
/* bus 8 : adc128d818 @ 0x1f */
@@ -515,25 +515,25 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
/* Bus 3: TODO dps310@76 */
dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
qdev_prop_set_string(dev, "description", "pca1");
- i2c_realize_and_unref(dev, aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3),
+ i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 3),
&error_fatal);
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c);
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
/* The Witherspoon expects a TMP275 but a TMP105 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105,
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105,
0x4a);
/* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
* good enough */
- i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
+ i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
- smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51,
+ smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51,
eeprom_buf);
dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
qdev_prop_set_string(dev, "description", "pca0");
- i2c_realize_and_unref(dev, aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11),
+ i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 11),
&error_fatal);
/* Bus 11: TODO ucd90160@64 */
}
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index fb973a983d..518a3f5c6f 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -959,9 +959,8 @@ static void aspeed_i2c_register_types(void)
type_init(aspeed_i2c_register_types)
-I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr)
+I2CBus *aspeed_i2c_get_bus(AspeedI2CState *s, int busnr)
{
- AspeedI2CState *s = ASPEED_I2C(dev);
AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s);
I2CBus *bus = NULL;
--
2.21.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH 1/5] hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus()
2020-06-29 17:38 ` [PATCH 1/5] hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus() Philippe Mathieu-Daudé
@ 2020-06-30 9:28 ` Markus Armbruster
2020-07-13 12:23 ` Cédric Le Goater
1 sibling, 0 replies; 22+ messages in thread
From: Markus Armbruster @ 2020-06-30 9:28 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, qemu-devel,
qemu-arm, qemu-ppc, Cédric Le Goater, Jan Kiszka,
David Gibson, Joel Stanley
Philippe Mathieu-Daudé <f4bug@amsat.org> writes:
> Simplify aspeed_i2c_get_bus() by using a AspeedI2CState argument.
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The real motivation seems to be simplifying the callers: every single
one of them casts the argument from AspeedI2CState * to DeviceState *.
Pointing that out in the commit message wouldn't hurt.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 1/5] hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus()
2020-06-29 17:38 ` [PATCH 1/5] hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus() Philippe Mathieu-Daudé
2020-06-30 9:28 ` Markus Armbruster
@ 2020-07-13 12:23 ` Cédric Le Goater
1 sibling, 0 replies; 22+ messages in thread
From: Cédric Le Goater @ 2020-07-13 12:23 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, qemu-devel
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, Markus Armbruster,
qemu-arm, qemu-ppc, Joel Stanley, Jan Kiszka, David Gibson
On 6/29/20 7:38 PM, Philippe Mathieu-Daudé wrote:
> Simplify aspeed_i2c_get_bus() by using a AspeedI2CState argument.
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
> ---
> include/hw/i2c/aspeed_i2c.h | 2 +-
> hw/arm/aspeed.c | 70 ++++++++++++++++++-------------------
> hw/i2c/aspeed_i2c.c | 3 +-
> 3 files changed, 37 insertions(+), 38 deletions(-)
>
> diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
> index f1b9e5bf91..243789ae5d 100644
> --- a/include/hw/i2c/aspeed_i2c.h
> +++ b/include/hw/i2c/aspeed_i2c.h
> @@ -93,6 +93,6 @@ typedef struct AspeedI2CClass {
>
> } AspeedI2CClass;
>
> -I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr);
> +I2CBus *aspeed_i2c_get_bus(AspeedI2CState *s, int busnr);
>
> #endif /* ASPEED_I2C_H */
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index 379f9672a5..1285bf82c0 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -385,13 +385,13 @@ static void palmetto_bmc_i2c_init(AspeedMachineState *bmc)
>
> /* The palmetto platform expects a ds3231 RTC but a ds1338 is
> * enough to provide basic RTC features. Alarms will be missing */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68);
>
> - smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), 0x50,
> + smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50,
> eeprom_buf);
>
> /* add a TMP423 temperature sensor */
> - dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2),
> + dev = i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2),
> "tmp423", 0x4c);
> object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort);
> object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort);
> @@ -404,16 +404,16 @@ static void ast2500_evb_i2c_init(AspeedMachineState *bmc)
> AspeedSoCState *soc = &bmc->soc;
> uint8_t *eeprom_buf = g_malloc0(8 * 1024);
>
> - smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), 0x50,
> + smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 3), 0x50,
> eeprom_buf);
>
> /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7),
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7),
> TYPE_TMP105, 0x4d);
>
> /* The AST2500 EVB does not have an RTC. Let's pretend that one is
> * plugged on the I2C bus header */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
> }
>
> static void ast2600_evb_i2c_init(AspeedMachineState *bmc)
> @@ -428,36 +428,36 @@ static void romulus_bmc_i2c_init(AspeedMachineState *bmc)
>
> /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is
> * good enough */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
> }
>
> static void swift_bmc_i2c_init(AspeedMachineState *bmc)
> {
> AspeedSoCState *soc = &bmc->soc;
>
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60);
>
> /* The swift board expects a TMP275 but a TMP105 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48);
> /* The swift board expects a pca9551 but a pca9552 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60);
>
> /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
>
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c);
> /* The swift board expects a pca9539 but a pca9552 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74);
>
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c);
> /* The swift board expects a pca9539 but a pca9552 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552",
> 0x74);
>
> /* The swift board expects a TMP275 but a TMP105 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a);
> }
>
> static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
> @@ -465,32 +465,32 @@ static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
> AspeedSoCState *soc = &bmc->soc;
>
> /* bus 2 : */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2), "tmp105", 0x48);
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2), "tmp105", 0x49);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49);
> /* bus 2 : pca9546 @ 0x73 */
>
> /* bus 3 : pca9548 @ 0x70 */
>
> /* bus 4 : */
> uint8_t *eeprom4_54 = g_malloc0(8 * 1024);
> - smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), 0x54,
> + smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54,
> eeprom4_54);
> /* PCA9539 @ 0x76, but PCA9552 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "pca9552", 0x76);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76);
> /* PCA9539 @ 0x77, but PCA9552 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "pca9552", 0x77);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77);
>
> /* bus 6 : */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 6), "tmp105", 0x48);
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 6), "tmp105", 0x49);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49);
> /* bus 6 : pca9546 @ 0x73 */
>
> /* bus 8 : */
> uint8_t *eeprom8_56 = g_malloc0(8 * 1024);
> - smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), 0x56,
> + smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56,
> eeprom8_56);
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x61);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
> /* bus 8 : adc128d818 @ 0x1d */
> /* bus 8 : adc128d818 @ 0x1f */
>
> @@ -515,25 +515,25 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
> /* Bus 3: TODO dps310@76 */
> dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
> qdev_prop_set_string(dev, "description", "pca1");
> - i2c_realize_and_unref(dev, aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3),
> + i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 3),
> &error_fatal);
>
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c);
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
>
> /* The Witherspoon expects a TMP275 but a TMP105 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105,
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105,
> 0x4a);
>
> /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
> * good enough */
> - i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
> + i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
>
> - smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51,
> + smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51,
> eeprom_buf);
> dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
> qdev_prop_set_string(dev, "description", "pca0");
> - i2c_realize_and_unref(dev, aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11),
> + i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 11),
> &error_fatal);
> /* Bus 11: TODO ucd90160@64 */
> }
> diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
> index fb973a983d..518a3f5c6f 100644
> --- a/hw/i2c/aspeed_i2c.c
> +++ b/hw/i2c/aspeed_i2c.c
> @@ -959,9 +959,8 @@ static void aspeed_i2c_register_types(void)
> type_init(aspeed_i2c_register_types)
>
>
> -I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr)
> +I2CBus *aspeed_i2c_get_bus(AspeedI2CState *s, int busnr)
> {
> - AspeedI2CState *s = ASPEED_I2C(dev);
> AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s);
> I2CBus *bus = NULL;
>
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 2/5] hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new()
2020-06-29 17:38 [PATCH 0/5] hw/i2c: Rename method names for consistency and add documentation Philippe Mathieu-Daudé
2020-06-29 17:38 ` [PATCH 1/5] hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus() Philippe Mathieu-Daudé
@ 2020-06-29 17:38 ` Philippe Mathieu-Daudé
2020-06-29 21:29 ` Corey Minyard
2020-06-29 21:37 ` BALATON Zoltan
2020-06-29 17:38 ` [PATCH 3/5] hw/i2c: Rename i2c_realize_and_unref() as i2c_slave_realize_and_unref() Philippe Mathieu-Daudé
` (3 subsequent siblings)
5 siblings, 2 replies; 22+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 17:38 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Philippe Mathieu-Daudé, Corey Minyard,
Andrew Jeffery, Markus Armbruster, Cédric Le Goater,
qemu-arm, qemu-ppc, Joel Stanley, Jan Kiszka, David Gibson
We use "new" names for functions that allocate and initialize
device objects: pci_new(), isa_new(), usb_new().
Let's call this one i2c_slave_new(). Since we have to update
all the callers, also let it return a I2CSlave object.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/i2c/i2c.h | 2 +-
hw/arm/aspeed.c | 4 ++--
hw/i2c/core.c | 9 ++++-----
3 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
index d6e3d85faf..18efc668f1 100644
--- a/include/hw/i2c/i2c.h
+++ b/include/hw/i2c/i2c.h
@@ -79,8 +79,8 @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send);
int i2c_send(I2CBus *bus, uint8_t data);
uint8_t i2c_recv(I2CBus *bus);
+I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr);
-DeviceState *i2c_try_create_slave(const char *name, uint8_t addr);
bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp);
/* lm832x.c */
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 1285bf82c0..54ca36e0b6 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -513,7 +513,7 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
/* Bus 3: TODO bmp280@77 */
/* Bus 3: TODO max31785@52 */
/* Bus 3: TODO dps310@76 */
- dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
+ dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
qdev_prop_set_string(dev, "description", "pca1");
i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 3),
&error_fatal);
@@ -531,7 +531,7 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51,
eeprom_buf);
- dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
+ dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
qdev_prop_set_string(dev, "description", "pca0");
i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 11),
&error_fatal);
diff --git a/hw/i2c/core.c b/hw/i2c/core.c
index acf34a12d6..6eacb4a463 100644
--- a/hw/i2c/core.c
+++ b/hw/i2c/core.c
@@ -267,13 +267,13 @@ const VMStateDescription vmstate_i2c_slave = {
}
};
-DeviceState *i2c_try_create_slave(const char *name, uint8_t addr)
+I2CSlave *i2c_slave_new(const char *name, uint8_t addr)
{
DeviceState *dev;
dev = qdev_new(name);
qdev_prop_set_uint8(dev, "address", addr);
- return dev;
+ return I2C_SLAVE(dev);
}
bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
@@ -283,10 +283,9 @@ bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr)
{
- DeviceState *dev;
+ DeviceState *dev = DEVICE(i2c_slave_new(name, addr));
- dev = i2c_try_create_slave(name, addr);
- i2c_realize_and_unref(dev, bus, &error_fatal);
+ i2c_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
return dev;
}
--
2.21.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH 2/5] hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new()
2020-06-29 17:38 ` [PATCH 2/5] hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new() Philippe Mathieu-Daudé
@ 2020-06-29 21:29 ` Corey Minyard
2020-06-29 21:37 ` BALATON Zoltan
1 sibling, 0 replies; 22+ messages in thread
From: Corey Minyard @ 2020-06-29 21:29 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, qemu-devel,
Markus Armbruster, qemu-arm, qemu-ppc, Cédric Le Goater,
Jan Kiszka, David Gibson, Joel Stanley
On Mon, Jun 29, 2020 at 07:38:18PM +0200, Philippe Mathieu-Daudé wrote:
> We use "new" names for functions that allocate and initialize
> device objects: pci_new(), isa_new(), usb_new().
> Let's call this one i2c_slave_new(). Since we have to update
> all the callers, also let it return a I2CSlave object.
Reviewed-by: Corey Minyard <cminyard@mvista.com>
>
> Suggested-by: Markus Armbruster <armbru@redhat.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> include/hw/i2c/i2c.h | 2 +-
> hw/arm/aspeed.c | 4 ++--
> hw/i2c/core.c | 9 ++++-----
> 3 files changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
> index d6e3d85faf..18efc668f1 100644
> --- a/include/hw/i2c/i2c.h
> +++ b/include/hw/i2c/i2c.h
> @@ -79,8 +79,8 @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send);
> int i2c_send(I2CBus *bus, uint8_t data);
> uint8_t i2c_recv(I2CBus *bus);
>
> +I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
> DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr);
> -DeviceState *i2c_try_create_slave(const char *name, uint8_t addr);
> bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp);
>
> /* lm832x.c */
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index 1285bf82c0..54ca36e0b6 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -513,7 +513,7 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
> /* Bus 3: TODO bmp280@77 */
> /* Bus 3: TODO max31785@52 */
> /* Bus 3: TODO dps310@76 */
> - dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
> + dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
> qdev_prop_set_string(dev, "description", "pca1");
> i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 3),
> &error_fatal);
> @@ -531,7 +531,7 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
>
> smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51,
> eeprom_buf);
> - dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
> + dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
> qdev_prop_set_string(dev, "description", "pca0");
> i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 11),
> &error_fatal);
> diff --git a/hw/i2c/core.c b/hw/i2c/core.c
> index acf34a12d6..6eacb4a463 100644
> --- a/hw/i2c/core.c
> +++ b/hw/i2c/core.c
> @@ -267,13 +267,13 @@ const VMStateDescription vmstate_i2c_slave = {
> }
> };
>
> -DeviceState *i2c_try_create_slave(const char *name, uint8_t addr)
> +I2CSlave *i2c_slave_new(const char *name, uint8_t addr)
> {
> DeviceState *dev;
>
> dev = qdev_new(name);
> qdev_prop_set_uint8(dev, "address", addr);
> - return dev;
> + return I2C_SLAVE(dev);
> }
>
> bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
> @@ -283,10 +283,9 @@ bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
>
> DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr)
> {
> - DeviceState *dev;
> + DeviceState *dev = DEVICE(i2c_slave_new(name, addr));
>
> - dev = i2c_try_create_slave(name, addr);
> - i2c_realize_and_unref(dev, bus, &error_fatal);
> + i2c_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
>
> return dev;
> }
> --
> 2.21.3
>
>
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 2/5] hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new()
2020-06-29 17:38 ` [PATCH 2/5] hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new() Philippe Mathieu-Daudé
2020-06-29 21:29 ` Corey Minyard
@ 2020-06-29 21:37 ` BALATON Zoltan
2020-06-30 8:29 ` Philippe Mathieu-Daudé
2020-06-30 9:37 ` Markus Armbruster
1 sibling, 2 replies; 22+ messages in thread
From: BALATON Zoltan @ 2020-06-29 21:37 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, qemu-devel,
Markus Armbruster, qemu-arm, qemu-ppc, Cédric Le Goater,
Jan Kiszka, David Gibson, Joel Stanley
[-- Attachment #1: Type: text/plain, Size: 3681 bytes --]
On Mon, 29 Jun 2020, Philippe Mathieu-Daudé wrote:
> We use "new" names for functions that allocate and initialize
> device objects: pci_new(), isa_new(), usb_new().
> Let's call this one i2c_slave_new(). Since we have to update
> all the callers, also let it return a I2CSlave object.
All the callers now need a cast due to change to I2CSlave * instead of
what they expect. Does that really worth it? Also this introduces
inconsistency between i2c_create_slave and i2c_new so not sure about that
part but I don't really mind either way. Maybe return what most callers
expect so the calls are simple and don't need an additional cast in most
of the cases?
Regards,
BALATON Zoltan
> Suggested-by: Markus Armbruster <armbru@redhat.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> include/hw/i2c/i2c.h | 2 +-
> hw/arm/aspeed.c | 4 ++--
> hw/i2c/core.c | 9 ++++-----
> 3 files changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
> index d6e3d85faf..18efc668f1 100644
> --- a/include/hw/i2c/i2c.h
> +++ b/include/hw/i2c/i2c.h
> @@ -79,8 +79,8 @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send);
> int i2c_send(I2CBus *bus, uint8_t data);
> uint8_t i2c_recv(I2CBus *bus);
>
> +I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
> DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr);
> -DeviceState *i2c_try_create_slave(const char *name, uint8_t addr);
> bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp);
>
> /* lm832x.c */
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index 1285bf82c0..54ca36e0b6 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -513,7 +513,7 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
> /* Bus 3: TODO bmp280@77 */
> /* Bus 3: TODO max31785@52 */
> /* Bus 3: TODO dps310@76 */
> - dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
> + dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
> qdev_prop_set_string(dev, "description", "pca1");
> i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 3),
> &error_fatal);
> @@ -531,7 +531,7 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
>
> smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51,
> eeprom_buf);
> - dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
> + dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
> qdev_prop_set_string(dev, "description", "pca0");
> i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 11),
> &error_fatal);
> diff --git a/hw/i2c/core.c b/hw/i2c/core.c
> index acf34a12d6..6eacb4a463 100644
> --- a/hw/i2c/core.c
> +++ b/hw/i2c/core.c
> @@ -267,13 +267,13 @@ const VMStateDescription vmstate_i2c_slave = {
> }
> };
>
> -DeviceState *i2c_try_create_slave(const char *name, uint8_t addr)
> +I2CSlave *i2c_slave_new(const char *name, uint8_t addr)
> {
> DeviceState *dev;
>
> dev = qdev_new(name);
> qdev_prop_set_uint8(dev, "address", addr);
> - return dev;
> + return I2C_SLAVE(dev);
> }
>
> bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
> @@ -283,10 +283,9 @@ bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
>
> DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr)
> {
> - DeviceState *dev;
> + DeviceState *dev = DEVICE(i2c_slave_new(name, addr));
>
> - dev = i2c_try_create_slave(name, addr);
> - i2c_realize_and_unref(dev, bus, &error_fatal);
> + i2c_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
>
> return dev;
> }
>
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 2/5] hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new()
2020-06-29 21:37 ` BALATON Zoltan
@ 2020-06-30 8:29 ` Philippe Mathieu-Daudé
2020-06-30 9:37 ` Markus Armbruster
1 sibling, 0 replies; 22+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-30 8:29 UTC (permalink / raw)
To: BALATON Zoltan
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, Joel Stanley,
qemu-devel, Markus Armbruster, qemu-arm, qemu-ppc,
Cédric Le Goater, Jan Kiszka, David Gibson
On 6/29/20 11:37 PM, BALATON Zoltan wrote:
> On Mon, 29 Jun 2020, Philippe Mathieu-Daudé wrote:
>> We use "new" names for functions that allocate and initialize
>> device objects: pci_new(), isa_new(), usb_new().
>> Let's call this one i2c_slave_new(). Since we have to update
>> all the callers, also let it return a I2CSlave object.
>
> All the callers now need a cast due to change to I2CSlave * instead of
> what they expect. Does that really worth it? Also this introduces
> inconsistency between i2c_create_slave and i2c_new so not sure about
> that part but I don't really mind either way. Maybe return what most
> callers expect so the calls are simple and don't need an additional cast
> in most of the cases?
You are right that the code guidance is not clear regarding what
qdev_foo_new() should return.
Working on another object (LEDs) Richard suggested me to return
the full type, so I understood it was the recommended default:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg714729.html
>
> Regards,
> BALATON Zoltan
>
>> Suggested-by: Markus Armbruster <armbru@redhat.com>
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> ---
>> include/hw/i2c/i2c.h | 2 +-
>> hw/arm/aspeed.c | 4 ++--
>> hw/i2c/core.c | 9 ++++-----
>> 3 files changed, 7 insertions(+), 8 deletions(-)
>>
>> diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
>> index d6e3d85faf..18efc668f1 100644
>> --- a/include/hw/i2c/i2c.h
>> +++ b/include/hw/i2c/i2c.h
>> @@ -79,8 +79,8 @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool
>> send);
>> int i2c_send(I2CBus *bus, uint8_t data);
>> uint8_t i2c_recv(I2CBus *bus);
>>
>> +I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
>> DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t
>> addr);
>> -DeviceState *i2c_try_create_slave(const char *name, uint8_t addr);
>> bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp);
>>
>> /* lm832x.c */
>> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
>> index 1285bf82c0..54ca36e0b6 100644
>> --- a/hw/arm/aspeed.c
>> +++ b/hw/arm/aspeed.c
>> @@ -513,7 +513,7 @@ static void
>> witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
>> /* Bus 3: TODO bmp280@77 */
>> /* Bus 3: TODO max31785@52 */
>> /* Bus 3: TODO dps310@76 */
>> - dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
>> + dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
>> qdev_prop_set_string(dev, "description", "pca1");
>> i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 3),
>> &error_fatal);
>> @@ -531,7 +531,7 @@ static void
>> witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
>>
>> smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51,
>> eeprom_buf);
>> - dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
>> + dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
>> qdev_prop_set_string(dev, "description", "pca0");
>> i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 11),
>> &error_fatal);
>> diff --git a/hw/i2c/core.c b/hw/i2c/core.c
>> index acf34a12d6..6eacb4a463 100644
>> --- a/hw/i2c/core.c
>> +++ b/hw/i2c/core.c
>> @@ -267,13 +267,13 @@ const VMStateDescription vmstate_i2c_slave = {
>> }
>> };
>>
>> -DeviceState *i2c_try_create_slave(const char *name, uint8_t addr)
>> +I2CSlave *i2c_slave_new(const char *name, uint8_t addr)
>> {
>> DeviceState *dev;
>>
>> dev = qdev_new(name);
>> qdev_prop_set_uint8(dev, "address", addr);
>> - return dev;
>> + return I2C_SLAVE(dev);
>> }
>>
>> bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
>> @@ -283,10 +283,9 @@ bool i2c_realize_and_unref(DeviceState *dev,
>> I2CBus *bus, Error **errp)
>>
>> DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t
>> addr)
>> {
>> - DeviceState *dev;
>> + DeviceState *dev = DEVICE(i2c_slave_new(name, addr));
>>
>> - dev = i2c_try_create_slave(name, addr);
>> - i2c_realize_and_unref(dev, bus, &error_fatal);
>> + i2c_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
>>
>> return dev;
>> }
>>
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 2/5] hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new()
2020-06-29 21:37 ` BALATON Zoltan
2020-06-30 8:29 ` Philippe Mathieu-Daudé
@ 2020-06-30 9:37 ` Markus Armbruster
1 sibling, 0 replies; 22+ messages in thread
From: Markus Armbruster @ 2020-06-30 9:37 UTC (permalink / raw)
To: BALATON Zoltan
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, Joel Stanley,
qemu-devel, Philippe Mathieu-Daudé, qemu-arm, qemu-ppc,
Cédric Le Goater, Jan Kiszka, David Gibson
BALATON Zoltan <balaton@eik.bme.hu> writes:
> On Mon, 29 Jun 2020, Philippe Mathieu-Daudé wrote:
>> We use "new" names for functions that allocate and initialize
>> device objects: pci_new(), isa_new(), usb_new().
>> Let's call this one i2c_slave_new(). Since we have to update
>> all the callers, also let it return a I2CSlave object.
>
> All the callers now need a cast due to change to I2CSlave * instead of
Actually, all but one; I'll mark it inline.
> what they expect. Does that really worth it? Also this introduces
> inconsistency between i2c_create_slave and i2c_new so not sure about
For what it's worth, this inconsistency is healed in PATCH 4.
> that part but I don't really mind either way. Maybe return what most
> callers expect so the calls are simple and don't need an additional
> cast in most of the cases?
I'd prefer consistency with similar FOO_new() functions for abstract
devices plugging into a FOOBus: pci_new(), isa_new(), usb_new().
> Regards,
> BALATON Zoltan
>
>> Suggested-by: Markus Armbruster <armbru@redhat.com>
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> ---
>> include/hw/i2c/i2c.h | 2 +-
>> hw/arm/aspeed.c | 4 ++--
>> hw/i2c/core.c | 9 ++++-----
>> 3 files changed, 7 insertions(+), 8 deletions(-)
>>
>> diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
>> index d6e3d85faf..18efc668f1 100644
>> --- a/include/hw/i2c/i2c.h
>> +++ b/include/hw/i2c/i2c.h
>> @@ -79,8 +79,8 @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send);
>> int i2c_send(I2CBus *bus, uint8_t data);
>> uint8_t i2c_recv(I2CBus *bus);
>>
>> +I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
>> DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr);
>> -DeviceState *i2c_try_create_slave(const char *name, uint8_t addr);
>> bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp);
>>
>> /* lm832x.c */
>> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
>> index 1285bf82c0..54ca36e0b6 100644
>> --- a/hw/arm/aspeed.c
>> +++ b/hw/arm/aspeed.c
>> @@ -513,7 +513,7 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
>> /* Bus 3: TODO bmp280@77 */
>> /* Bus 3: TODO max31785@52 */
>> /* Bus 3: TODO dps310@76 */
>> - dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
>> + dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
>> qdev_prop_set_string(dev, "description", "pca1");
>> i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 3),
>> &error_fatal);
>> @@ -531,7 +531,7 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
>>
>> smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51,
>> eeprom_buf);
>> - dev = i2c_try_create_slave(TYPE_PCA9552, 0x60);
>> + dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
>> qdev_prop_set_string(dev, "description", "pca0");
>> i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 11),
>> &error_fatal);
>> diff --git a/hw/i2c/core.c b/hw/i2c/core.c
>> index acf34a12d6..6eacb4a463 100644
>> --- a/hw/i2c/core.c
>> +++ b/hw/i2c/core.c
>> @@ -267,13 +267,13 @@ const VMStateDescription vmstate_i2c_slave = {
>> }
>> };
>>
>> -DeviceState *i2c_try_create_slave(const char *name, uint8_t addr)
>> +I2CSlave *i2c_slave_new(const char *name, uint8_t addr)
>> {
>> DeviceState *dev;
>>
>> dev = qdev_new(name);
>> qdev_prop_set_uint8(dev, "address", addr);
>> - return dev;
>> + return I2C_SLAVE(dev);
>> }
>>
>> bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
>> @@ -283,10 +283,9 @@ bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
>>
>> DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr)
>> {
>> - DeviceState *dev;
>> + DeviceState *dev = DEVICE(i2c_slave_new(name, addr));
>>
>> - dev = i2c_try_create_slave(name, addr);
>> - i2c_realize_and_unref(dev, bus, &error_fatal);
>> + i2c_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
>>
>> return dev;
>> }
Fewer casts:
DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr)
{
I2CSlave *dev = i2c_slave_new(name, addr );
i2c_realize_and_unref(dev, bus, &error_fatal);
return DEVICE(dev);
}
It's all the same after PATCH 4. You decide whether to polish the
intermediate state.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 3/5] hw/i2c: Rename i2c_realize_and_unref() as i2c_slave_realize_and_unref()
2020-06-29 17:38 [PATCH 0/5] hw/i2c: Rename method names for consistency and add documentation Philippe Mathieu-Daudé
2020-06-29 17:38 ` [PATCH 1/5] hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus() Philippe Mathieu-Daudé
2020-06-29 17:38 ` [PATCH 2/5] hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new() Philippe Mathieu-Daudé
@ 2020-06-29 17:38 ` Philippe Mathieu-Daudé
2020-06-29 21:29 ` Corey Minyard
2020-06-29 17:38 ` [PATCH 4/5] hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple() Philippe Mathieu-Daudé
` (2 subsequent siblings)
5 siblings, 1 reply; 22+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 17:38 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Philippe Mathieu-Daudé, Corey Minyard,
Andrew Jeffery, Markus Armbruster, Cédric Le Goater,
qemu-arm, qemu-ppc, Joel Stanley, Jan Kiszka, David Gibson
The other i2c functions are called i2c_slave_FOO(). Rename as
i2c_slave_realize_and_unref() to be consistent.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/i2c/i2c.h | 2 +-
hw/arm/aspeed.c | 10 ++++++----
hw/i2c/core.c | 6 +++---
3 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
index 18efc668f1..cb7211f027 100644
--- a/include/hw/i2c/i2c.h
+++ b/include/hw/i2c/i2c.h
@@ -81,7 +81,7 @@ uint8_t i2c_recv(I2CBus *bus);
I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr);
-bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp);
+bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp);
/* lm832x.c */
void lm832x_key_event(DeviceState *dev, int key, int state);
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 54ca36e0b6..ed14e79f57 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -515,8 +515,9 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
/* Bus 3: TODO dps310@76 */
dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
qdev_prop_set_string(dev, "description", "pca1");
- i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 3),
- &error_fatal);
+ i2c_slave_realize_and_unref(I2C_SLAVE(dev),
+ aspeed_i2c_get_bus(&soc->i2c, 3),
+ &error_fatal);
i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
@@ -533,8 +534,9 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
eeprom_buf);
dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
qdev_prop_set_string(dev, "description", "pca0");
- i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 11),
- &error_fatal);
+ i2c_slave_realize_and_unref(I2C_SLAVE(dev),
+ aspeed_i2c_get_bus(&soc->i2c, 11),
+ &error_fatal);
/* Bus 11: TODO ucd90160@64 */
}
diff --git a/hw/i2c/core.c b/hw/i2c/core.c
index 6eacb4a463..135ea56036 100644
--- a/hw/i2c/core.c
+++ b/hw/i2c/core.c
@@ -276,16 +276,16 @@ I2CSlave *i2c_slave_new(const char *name, uint8_t addr)
return I2C_SLAVE(dev);
}
-bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
+bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp)
{
- return qdev_realize_and_unref(dev, &bus->qbus, errp);
+ return qdev_realize_and_unref(&dev->qdev, &bus->qbus, errp);
}
DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr)
{
DeviceState *dev = DEVICE(i2c_slave_new(name, addr));
- i2c_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
+ i2c_slave_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
return dev;
}
--
2.21.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH 3/5] hw/i2c: Rename i2c_realize_and_unref() as i2c_slave_realize_and_unref()
2020-06-29 17:38 ` [PATCH 3/5] hw/i2c: Rename i2c_realize_and_unref() as i2c_slave_realize_and_unref() Philippe Mathieu-Daudé
@ 2020-06-29 21:29 ` Corey Minyard
0 siblings, 0 replies; 22+ messages in thread
From: Corey Minyard @ 2020-06-29 21:29 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, qemu-devel,
Markus Armbruster, qemu-arm, qemu-ppc, Cédric Le Goater,
Jan Kiszka, David Gibson, Joel Stanley
On Mon, Jun 29, 2020 at 07:38:19PM +0200, Philippe Mathieu-Daudé wrote:
> The other i2c functions are called i2c_slave_FOO(). Rename as
> i2c_slave_realize_and_unref() to be consistent.
Reviewed-by: Corey Minyard <cminyard@mvista.com>
>
> Suggested-by: Markus Armbruster <armbru@redhat.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> include/hw/i2c/i2c.h | 2 +-
> hw/arm/aspeed.c | 10 ++++++----
> hw/i2c/core.c | 6 +++---
> 3 files changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
> index 18efc668f1..cb7211f027 100644
> --- a/include/hw/i2c/i2c.h
> +++ b/include/hw/i2c/i2c.h
> @@ -81,7 +81,7 @@ uint8_t i2c_recv(I2CBus *bus);
>
> I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
> DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr);
> -bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp);
> +bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp);
>
> /* lm832x.c */
> void lm832x_key_event(DeviceState *dev, int key, int state);
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index 54ca36e0b6..ed14e79f57 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -515,8 +515,9 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
> /* Bus 3: TODO dps310@76 */
> dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
> qdev_prop_set_string(dev, "description", "pca1");
> - i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 3),
> - &error_fatal);
> + i2c_slave_realize_and_unref(I2C_SLAVE(dev),
> + aspeed_i2c_get_bus(&soc->i2c, 3),
> + &error_fatal);
>
> i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
> i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
> @@ -533,8 +534,9 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
> eeprom_buf);
> dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
> qdev_prop_set_string(dev, "description", "pca0");
> - i2c_realize_and_unref(dev, aspeed_i2c_get_bus(&soc->i2c, 11),
> - &error_fatal);
> + i2c_slave_realize_and_unref(I2C_SLAVE(dev),
> + aspeed_i2c_get_bus(&soc->i2c, 11),
> + &error_fatal);
> /* Bus 11: TODO ucd90160@64 */
> }
>
> diff --git a/hw/i2c/core.c b/hw/i2c/core.c
> index 6eacb4a463..135ea56036 100644
> --- a/hw/i2c/core.c
> +++ b/hw/i2c/core.c
> @@ -276,16 +276,16 @@ I2CSlave *i2c_slave_new(const char *name, uint8_t addr)
> return I2C_SLAVE(dev);
> }
>
> -bool i2c_realize_and_unref(DeviceState *dev, I2CBus *bus, Error **errp)
> +bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp)
> {
> - return qdev_realize_and_unref(dev, &bus->qbus, errp);
> + return qdev_realize_and_unref(&dev->qdev, &bus->qbus, errp);
> }
>
> DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr)
> {
> DeviceState *dev = DEVICE(i2c_slave_new(name, addr));
>
> - i2c_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
> + i2c_slave_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
>
> return dev;
> }
> --
> 2.21.3
>
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 4/5] hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()
2020-06-29 17:38 [PATCH 0/5] hw/i2c: Rename method names for consistency and add documentation Philippe Mathieu-Daudé
` (2 preceding siblings ...)
2020-06-29 17:38 ` [PATCH 3/5] hw/i2c: Rename i2c_realize_and_unref() as i2c_slave_realize_and_unref() Philippe Mathieu-Daudé
@ 2020-06-29 17:38 ` Philippe Mathieu-Daudé
2020-06-29 21:29 ` Corey Minyard
2020-06-30 9:48 ` Markus Armbruster
2020-06-29 17:38 ` [PATCH 5/5] hw/i2c: Document the I2C qdev helpers Philippe Mathieu-Daudé
2020-06-29 21:28 ` [PATCH 0/5] hw/i2c: Rename method names for consistency and add documentation Corey Minyard
5 siblings, 2 replies; 22+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 17:38 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Philippe Mathieu-Daudé, Corey Minyard,
Andrew Jeffery, Markus Armbruster, Cédric Le Goater,
qemu-arm, qemu-ppc, Joel Stanley, Jan Kiszka, David Gibson
We use "create_simple" names for functions that allocate, initialize,
configure and realize device objects: pci_create_simple(),
isa_create_simple(), usb_create_simple(). For consistency, rename
i2c_create_slave() as i2c_slave_create_simple(). Since we have
to update all the callers, also let it return a I2CSlave object.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/i2c/i2c.h | 2 +-
hw/arm/aspeed.c | 58 ++++++++++++++++++++++----------------------
hw/arm/musicpal.c | 4 +--
hw/arm/nseries.c | 8 +++---
hw/arm/pxa2xx.c | 5 ++--
hw/arm/realview.c | 2 +-
hw/arm/spitz.c | 4 +--
hw/arm/stellaris.c | 2 +-
hw/arm/tosa.c | 2 +-
hw/arm/versatilepb.c | 2 +-
hw/arm/vexpress.c | 2 +-
hw/arm/z2.c | 4 +--
hw/display/sii9022.c | 2 +-
hw/i2c/core.c | 6 ++---
hw/ppc/e500.c | 2 +-
hw/ppc/sam460ex.c | 2 +-
16 files changed, 54 insertions(+), 53 deletions(-)
diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
index cb7211f027..c533058998 100644
--- a/include/hw/i2c/i2c.h
+++ b/include/hw/i2c/i2c.h
@@ -80,7 +80,7 @@ int i2c_send(I2CBus *bus, uint8_t data);
uint8_t i2c_recv(I2CBus *bus);
I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
-DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr);
+I2CSlave *i2c_slave_create_simple(I2CBus *bus, const char *name, uint8_t addr);
bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp);
/* lm832x.c */
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index ed14e79f57..5fa95f0f02 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -385,14 +385,14 @@ static void palmetto_bmc_i2c_init(AspeedMachineState *bmc)
/* The palmetto platform expects a ds3231 RTC but a ds1338 is
* enough to provide basic RTC features. Alarms will be missing */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50,
eeprom_buf);
/* add a TMP423 temperature sensor */
- dev = i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2),
- "tmp423", 0x4c);
+ dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2),
+ "tmp423", 0x4c));
object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort);
object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort);
object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort);
@@ -408,12 +408,12 @@ static void ast2500_evb_i2c_init(AspeedMachineState *bmc)
eeprom_buf);
/* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7),
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7),
TYPE_TMP105, 0x4d);
/* The AST2500 EVB does not have an RTC. Let's pretend that one is
* plugged on the I2C bus header */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
}
static void ast2600_evb_i2c_init(AspeedMachineState *bmc)
@@ -428,36 +428,36 @@ static void romulus_bmc_i2c_init(AspeedMachineState *bmc)
/* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is
* good enough */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
}
static void swift_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60);
/* The swift board expects a TMP275 but a TMP105 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48);
/* The swift board expects a pca9551 but a pca9552 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60);
/* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32);
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c);
/* The swift board expects a pca9539 but a pca9552 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74);
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c);
/* The swift board expects a pca9539 but a pca9552 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552",
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552",
0x74);
/* The swift board expects a TMP275 but a TMP105 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48);
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a);
}
static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
@@ -465,8 +465,8 @@ static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
AspeedSoCState *soc = &bmc->soc;
/* bus 2 : */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48);
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49);
/* bus 2 : pca9546 @ 0x73 */
/* bus 3 : pca9548 @ 0x70 */
@@ -476,21 +476,21 @@ static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54,
eeprom4_54);
/* PCA9539 @ 0x76, but PCA9552 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76);
/* PCA9539 @ 0x77, but PCA9552 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77);
/* bus 6 : */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48);
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49);
/* bus 6 : pca9546 @ 0x73 */
/* bus 8 : */
uint8_t *eeprom8_56 = g_malloc0(8 * 1024);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56,
eeprom8_56);
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
/* bus 8 : adc128d818 @ 0x1d */
/* bus 8 : adc128d818 @ 0x1f */
@@ -519,16 +519,16 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
aspeed_i2c_get_bus(&soc->i2c, 3),
&error_fatal);
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
/* The Witherspoon expects a TMP275 but a TMP105 is compatible */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105,
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105,
0x4a);
/* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
* good enough */
- i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51,
eeprom_buf);
diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c
index 394a3345bd..bf7bd28b94 100644
--- a/hw/arm/musicpal.c
+++ b/hw/arm/musicpal.c
@@ -1584,7 +1584,7 @@ static void musicpal_init(MachineState *machine)
DeviceState *i2c_dev;
DeviceState *lcd_dev;
DeviceState *key_dev;
- DeviceState *wm8750_dev;
+ I2CSlave *wm8750_dev;
SysBusDevice *s;
I2CBus *i2c;
int i;
@@ -1687,7 +1687,7 @@ static void musicpal_init(MachineState *machine)
qdev_connect_gpio_out(key_dev, i, qdev_get_gpio_in(dev, i + 15));
}
- wm8750_dev = i2c_create_slave(i2c, TYPE_WM8750, MP_WM_ADDR);
+ wm8750_dev = i2c_slave_create_simple(i2c, TYPE_WM8750, MP_WM_ADDR);
dev = qdev_new(TYPE_MV88W8618_AUDIO);
s = SYS_BUS_DEVICE(dev);
object_property_set_link(OBJECT(dev), OBJECT(wm8750_dev),
diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
index 428a2a2c5a..e48092ca04 100644
--- a/hw/arm/nseries.c
+++ b/hw/arm/nseries.c
@@ -215,7 +215,7 @@ static void n8x0_i2c_setup(struct n800_s *s)
I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]);
/* Attach a menelaus PM chip */
- dev = i2c_create_slave(i2c, "twl92230", N8X0_MENELAUS_ADDR);
+ dev = DEVICE(i2c_slave_create_simple(i2c, "twl92230", N8X0_MENELAUS_ADDR));
qdev_connect_gpio_out(dev, 3,
qdev_get_gpio_in(s->mpu->ih[0],
OMAP_INT_24XX_SYS_NIRQ));
@@ -224,7 +224,7 @@ static void n8x0_i2c_setup(struct n800_s *s)
qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier);
/* Attach a TMP105 PM chip (A0 wired to ground) */
- dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR);
+ dev = DEVICE(i2c_slave_create_simple(i2c, TYPE_TMP105, N8X0_TMP105_ADDR));
qdev_connect_gpio_out(dev, 0, tmp_irq);
}
@@ -416,8 +416,8 @@ static void n810_kbd_setup(struct n800_s *s)
/* Attach the LM8322 keyboard to the I2C bus,
* should happen in n8x0_i2c_setup and s->kbd be initialised here. */
- s->kbd = i2c_create_slave(omap_i2c_bus(s->mpu->i2c[0]),
- "lm8323", N810_LM8323_ADDR);
+ s->kbd = DEVICE(i2c_slave_create_simple(omap_i2c_bus(s->mpu->i2c[0]),
+ "lm8323", N810_LM8323_ADDR));
qdev_connect_gpio_out(s->kbd, 0, kbd_irq);
}
diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
index f104a33463..6203c4cfe0 100644
--- a/hw/arm/pxa2xx.c
+++ b/hw/arm/pxa2xx.c
@@ -1522,8 +1522,9 @@ PXA2xxI2CState *pxa2xx_i2c_init(hwaddr base,
s = PXA2XX_I2C(i2c_dev);
/* FIXME: Should the slave device really be on a separate bus? */
i2cbus = i2c_init_bus(dev, "dummy");
- dev = i2c_create_slave(i2cbus, TYPE_PXA2XX_I2C_SLAVE, 0);
- s->slave = PXA2XX_I2C_SLAVE(dev);
+ s->slave = PXA2XX_I2C_SLAVE(i2c_slave_create_simple(i2cbus,
+ TYPE_PXA2XX_I2C_SLAVE,
+ 0));
s->slave->host = s;
return s;
diff --git a/hw/arm/realview.c b/hw/arm/realview.c
index b6c0a1adb9..e105b6509f 100644
--- a/hw/arm/realview.c
+++ b/hw/arm/realview.c
@@ -285,7 +285,7 @@ static void realview_init(MachineState *machine,
dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL);
i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
- i2c_create_slave(i2c, "ds1338", 0x68);
+ i2c_slave_create_simple(i2c, "ds1338", 0x68);
/* Memory map for RealView Emulation Baseboard: */
/* 0x10000000 System registers. */
diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c
index fc18212e68..716ca3c7b6 100644
--- a/hw/arm/spitz.c
+++ b/hw/arm/spitz.c
@@ -758,7 +758,7 @@ static void spitz_i2c_setup(PXA2xxState *cpu)
DeviceState *wm;
/* Attach a WM8750 to the bus */
- wm = i2c_create_slave(bus, TYPE_WM8750, 0);
+ wm = DEVICE(i2c_slave_create_simple(bus, TYPE_WM8750, 0));
spitz_wm8750_addr(wm, 0, 0);
qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM,
@@ -773,7 +773,7 @@ static void spitz_i2c_setup(PXA2xxState *cpu)
static void spitz_akita_i2c_setup(PXA2xxState *cpu)
{
/* Attach a Max7310 to Akita I2C bus. */
- i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310",
+ i2c_slave_create_simple(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310",
AKITA_MAX_ADDR);
}
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 97ef566c12..3f45550cf6 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -1380,7 +1380,7 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
qdev_get_gpio_in(nvic, 8));
i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
if (board->peripherals & BP_OLED_I2C) {
- i2c_create_slave(i2c, "ssd0303", 0x3d);
+ i2c_slave_create_simple(i2c, "ssd0303", 0x3d);
}
}
diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c
index 5dee2d76c6..8c1ee0cdd1 100644
--- a/hw/arm/tosa.c
+++ b/hw/arm/tosa.c
@@ -206,7 +206,7 @@ static uint8_t tosa_dac_recv(I2CSlave *s)
static void tosa_tg_init(PXA2xxState *cpu)
{
I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
- i2c_create_slave(bus, TYPE_TOSA_DAC, DAC_BASE);
+ i2c_slave_create_simple(bus, TYPE_TOSA_DAC, DAC_BASE);
ssi_create_slave(cpu->ssp[1], "tosa-ssp");
}
diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c
index e596b8170f..34709afb32 100644
--- a/hw/arm/versatilepb.c
+++ b/hw/arm/versatilepb.c
@@ -317,7 +317,7 @@ static void versatile_init(MachineState *machine, int board_id)
dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL);
i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
- i2c_create_slave(i2c, "ds1338", 0x68);
+ i2c_slave_create_simple(i2c, "ds1338", 0x68);
/* Add PL041 AACI Interface to the LM4549 codec */
pl041 = qdev_new("pl041");
diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
index 5bf9cff8a8..4f6a2b6ddd 100644
--- a/hw/arm/vexpress.c
+++ b/hw/arm/vexpress.c
@@ -642,7 +642,7 @@ static void vexpress_common_init(MachineState *machine)
dev = sysbus_create_simple(TYPE_VERSATILE_I2C, map[VE_SERIALDVI], NULL);
i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
- i2c_create_slave(i2c, "sii9022", 0x39);
+ i2c_slave_create_simple(i2c, "sii9022", 0x39);
sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */
diff --git a/hw/arm/z2.c b/hw/arm/z2.c
index a0f4095990..8cf8189f6f 100644
--- a/hw/arm/z2.c
+++ b/hw/arm/z2.c
@@ -327,8 +327,8 @@ static void z2_init(MachineState *machine)
type_register_static(&aer915_info);
z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd");
bus = pxa2xx_i2c_bus(mpu->i2c[0]);
- i2c_create_slave(bus, TYPE_AER915, 0x55);
- wm = i2c_create_slave(bus, TYPE_WM8750, 0x1b);
+ i2c_slave_create_simple(bus, TYPE_AER915, 0x55);
+ wm = DEVICE(i2c_slave_create_simple(bus, TYPE_WM8750, 0x1b));
mpu->i2s->opaque = wm;
mpu->i2s->codec_out = wm8750_dac_dat;
mpu->i2s->codec_in = wm8750_adc_dat;
diff --git a/hw/display/sii9022.c b/hw/display/sii9022.c
index 0710ce9de5..3b82a8567f 100644
--- a/hw/display/sii9022.c
+++ b/hw/display/sii9022.c
@@ -161,7 +161,7 @@ static void sii9022_realize(DeviceState *dev, Error **errp)
I2CBus *bus;
bus = I2C_BUS(qdev_get_parent_bus(dev));
- i2c_create_slave(bus, TYPE_I2CDDC, 0x50);
+ i2c_slave_create_simple(bus, TYPE_I2CDDC, 0x50);
}
static void sii9022_class_init(ObjectClass *klass, void *data)
diff --git a/hw/i2c/core.c b/hw/i2c/core.c
index 135ea56036..21ec52ac5a 100644
--- a/hw/i2c/core.c
+++ b/hw/i2c/core.c
@@ -281,11 +281,11 @@ bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp)
return qdev_realize_and_unref(&dev->qdev, &bus->qbus, errp);
}
-DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr)
+I2CSlave *i2c_slave_create_simple(I2CBus *bus, const char *name, uint8_t addr)
{
- DeviceState *dev = DEVICE(i2c_slave_new(name, addr));
+ I2CSlave *dev = i2c_slave_new(name, addr);
- i2c_slave_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
+ i2c_slave_realize_and_unref(dev, bus, &error_abort);
return dev;
}
diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
index 51bf95b303..67924915ae 100644
--- a/hw/ppc/e500.c
+++ b/hw/ppc/e500.c
@@ -944,7 +944,7 @@ void ppce500_init(MachineState *machine)
memory_region_add_subregion(ccsr_addr_space, MPC8544_I2C_REGS_OFFSET,
sysbus_mmio_get_region(s, 0));
i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
- i2c_create_slave(i2c, "ds1338", RTC_REGS_OFFSET);
+ i2c_slave_create_simple(i2c, "ds1338", RTC_REGS_OFFSET);
/* General Utility device */
diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
index 1a106a68de..1702344c46 100644
--- a/hw/ppc/sam460ex.c
+++ b/hw/ppc/sam460ex.c
@@ -339,7 +339,7 @@ static void sam460ex_init(MachineState *machine)
spd_data[20] = 4; /* SO-DIMM module */
smbus_eeprom_init_one(i2c, 0x50, spd_data);
/* RTC */
- i2c_create_slave(i2c, "m41t80", 0x68);
+ i2c_slave_create_simple(i2c, "m41t80", 0x68);
dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]);
--
2.21.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH 4/5] hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()
2020-06-29 17:38 ` [PATCH 4/5] hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple() Philippe Mathieu-Daudé
@ 2020-06-29 21:29 ` Corey Minyard
2020-06-30 9:48 ` Markus Armbruster
1 sibling, 0 replies; 22+ messages in thread
From: Corey Minyard @ 2020-06-29 21:29 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, qemu-devel,
Markus Armbruster, qemu-arm, qemu-ppc, Cédric Le Goater,
Jan Kiszka, David Gibson, Joel Stanley
On Mon, Jun 29, 2020 at 07:38:20PM +0200, Philippe Mathieu-Daudé wrote:
> We use "create_simple" names for functions that allocate, initialize,
> configure and realize device objects: pci_create_simple(),
> isa_create_simple(), usb_create_simple(). For consistency, rename
> i2c_create_slave() as i2c_slave_create_simple(). Since we have
> to update all the callers, also let it return a I2CSlave object.
Reviewed-by: Corey Minyard <cminyard@mvista.com>
>
> Suggested-by: Markus Armbruster <armbru@redhat.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> include/hw/i2c/i2c.h | 2 +-
> hw/arm/aspeed.c | 58 ++++++++++++++++++++++----------------------
> hw/arm/musicpal.c | 4 +--
> hw/arm/nseries.c | 8 +++---
> hw/arm/pxa2xx.c | 5 ++--
> hw/arm/realview.c | 2 +-
> hw/arm/spitz.c | 4 +--
> hw/arm/stellaris.c | 2 +-
> hw/arm/tosa.c | 2 +-
> hw/arm/versatilepb.c | 2 +-
> hw/arm/vexpress.c | 2 +-
> hw/arm/z2.c | 4 +--
> hw/display/sii9022.c | 2 +-
> hw/i2c/core.c | 6 ++---
> hw/ppc/e500.c | 2 +-
> hw/ppc/sam460ex.c | 2 +-
> 16 files changed, 54 insertions(+), 53 deletions(-)
>
> diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
> index cb7211f027..c533058998 100644
> --- a/include/hw/i2c/i2c.h
> +++ b/include/hw/i2c/i2c.h
> @@ -80,7 +80,7 @@ int i2c_send(I2CBus *bus, uint8_t data);
> uint8_t i2c_recv(I2CBus *bus);
>
> I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
> -DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr);
> +I2CSlave *i2c_slave_create_simple(I2CBus *bus, const char *name, uint8_t addr);
> bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp);
>
> /* lm832x.c */
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index ed14e79f57..5fa95f0f02 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -385,14 +385,14 @@ static void palmetto_bmc_i2c_init(AspeedMachineState *bmc)
>
> /* The palmetto platform expects a ds3231 RTC but a ds1338 is
> * enough to provide basic RTC features. Alarms will be missing */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68);
>
> smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50,
> eeprom_buf);
>
> /* add a TMP423 temperature sensor */
> - dev = i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2),
> - "tmp423", 0x4c);
> + dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2),
> + "tmp423", 0x4c));
> object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort);
> object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort);
> object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort);
> @@ -408,12 +408,12 @@ static void ast2500_evb_i2c_init(AspeedMachineState *bmc)
> eeprom_buf);
>
> /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7),
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7),
> TYPE_TMP105, 0x4d);
>
> /* The AST2500 EVB does not have an RTC. Let's pretend that one is
> * plugged on the I2C bus header */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
> }
>
> static void ast2600_evb_i2c_init(AspeedMachineState *bmc)
> @@ -428,36 +428,36 @@ static void romulus_bmc_i2c_init(AspeedMachineState *bmc)
>
> /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is
> * good enough */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
> }
>
> static void swift_bmc_i2c_init(AspeedMachineState *bmc)
> {
> AspeedSoCState *soc = &bmc->soc;
>
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "pca9552", 0x60);
>
> /* The swift board expects a TMP275 but a TMP105 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "tmp105", 0x48);
> /* The swift board expects a pca9551 but a pca9552 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9552", 0x60);
>
> /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32);
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "ds1338", 0x32);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
>
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c);
> /* The swift board expects a pca9539 but a pca9552 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "pca9552", 0x74);
>
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c);
> /* The swift board expects a pca9539 but a pca9552 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552",
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "pca9552",
> 0x74);
>
> /* The swift board expects a TMP275 but a TMP105 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48);
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x48);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "tmp105", 0x4a);
> }
>
> static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
> @@ -465,8 +465,8 @@ static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
> AspeedSoCState *soc = &bmc->soc;
>
> /* bus 2 : */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48);
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49);
> /* bus 2 : pca9546 @ 0x73 */
>
> /* bus 3 : pca9548 @ 0x70 */
> @@ -476,21 +476,21 @@ static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
> smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54,
> eeprom4_54);
> /* PCA9539 @ 0x76, but PCA9552 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x76);
> /* PCA9539 @ 0x77, but PCA9552 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9552", 0x77);
>
> /* bus 6 : */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48);
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49);
> /* bus 6 : pca9546 @ 0x73 */
>
> /* bus 8 : */
> uint8_t *eeprom8_56 = g_malloc0(8 * 1024);
> smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56,
> eeprom8_56);
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x60);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9552", 0x61);
> /* bus 8 : adc128d818 @ 0x1d */
> /* bus 8 : adc128d818 @ 0x1f */
>
> @@ -519,16 +519,16 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
> aspeed_i2c_get_bus(&soc->i2c, 3),
> &error_fatal);
>
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
>
> /* The Witherspoon expects a TMP275 but a TMP105 is compatible */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105,
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105,
> 0x4a);
>
> /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
> * good enough */
> - i2c_create_slave(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
> + i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
>
> smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51,
> eeprom_buf);
> diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c
> index 394a3345bd..bf7bd28b94 100644
> --- a/hw/arm/musicpal.c
> +++ b/hw/arm/musicpal.c
> @@ -1584,7 +1584,7 @@ static void musicpal_init(MachineState *machine)
> DeviceState *i2c_dev;
> DeviceState *lcd_dev;
> DeviceState *key_dev;
> - DeviceState *wm8750_dev;
> + I2CSlave *wm8750_dev;
> SysBusDevice *s;
> I2CBus *i2c;
> int i;
> @@ -1687,7 +1687,7 @@ static void musicpal_init(MachineState *machine)
> qdev_connect_gpio_out(key_dev, i, qdev_get_gpio_in(dev, i + 15));
> }
>
> - wm8750_dev = i2c_create_slave(i2c, TYPE_WM8750, MP_WM_ADDR);
> + wm8750_dev = i2c_slave_create_simple(i2c, TYPE_WM8750, MP_WM_ADDR);
> dev = qdev_new(TYPE_MV88W8618_AUDIO);
> s = SYS_BUS_DEVICE(dev);
> object_property_set_link(OBJECT(dev), OBJECT(wm8750_dev),
> diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
> index 428a2a2c5a..e48092ca04 100644
> --- a/hw/arm/nseries.c
> +++ b/hw/arm/nseries.c
> @@ -215,7 +215,7 @@ static void n8x0_i2c_setup(struct n800_s *s)
> I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]);
>
> /* Attach a menelaus PM chip */
> - dev = i2c_create_slave(i2c, "twl92230", N8X0_MENELAUS_ADDR);
> + dev = DEVICE(i2c_slave_create_simple(i2c, "twl92230", N8X0_MENELAUS_ADDR));
> qdev_connect_gpio_out(dev, 3,
> qdev_get_gpio_in(s->mpu->ih[0],
> OMAP_INT_24XX_SYS_NIRQ));
> @@ -224,7 +224,7 @@ static void n8x0_i2c_setup(struct n800_s *s)
> qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier);
>
> /* Attach a TMP105 PM chip (A0 wired to ground) */
> - dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR);
> + dev = DEVICE(i2c_slave_create_simple(i2c, TYPE_TMP105, N8X0_TMP105_ADDR));
> qdev_connect_gpio_out(dev, 0, tmp_irq);
> }
>
> @@ -416,8 +416,8 @@ static void n810_kbd_setup(struct n800_s *s)
>
> /* Attach the LM8322 keyboard to the I2C bus,
> * should happen in n8x0_i2c_setup and s->kbd be initialised here. */
> - s->kbd = i2c_create_slave(omap_i2c_bus(s->mpu->i2c[0]),
> - "lm8323", N810_LM8323_ADDR);
> + s->kbd = DEVICE(i2c_slave_create_simple(omap_i2c_bus(s->mpu->i2c[0]),
> + "lm8323", N810_LM8323_ADDR));
> qdev_connect_gpio_out(s->kbd, 0, kbd_irq);
> }
>
> diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
> index f104a33463..6203c4cfe0 100644
> --- a/hw/arm/pxa2xx.c
> +++ b/hw/arm/pxa2xx.c
> @@ -1522,8 +1522,9 @@ PXA2xxI2CState *pxa2xx_i2c_init(hwaddr base,
> s = PXA2XX_I2C(i2c_dev);
> /* FIXME: Should the slave device really be on a separate bus? */
> i2cbus = i2c_init_bus(dev, "dummy");
> - dev = i2c_create_slave(i2cbus, TYPE_PXA2XX_I2C_SLAVE, 0);
> - s->slave = PXA2XX_I2C_SLAVE(dev);
> + s->slave = PXA2XX_I2C_SLAVE(i2c_slave_create_simple(i2cbus,
> + TYPE_PXA2XX_I2C_SLAVE,
> + 0));
> s->slave->host = s;
>
> return s;
> diff --git a/hw/arm/realview.c b/hw/arm/realview.c
> index b6c0a1adb9..e105b6509f 100644
> --- a/hw/arm/realview.c
> +++ b/hw/arm/realview.c
> @@ -285,7 +285,7 @@ static void realview_init(MachineState *machine,
>
> dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL);
> i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
> - i2c_create_slave(i2c, "ds1338", 0x68);
> + i2c_slave_create_simple(i2c, "ds1338", 0x68);
>
> /* Memory map for RealView Emulation Baseboard: */
> /* 0x10000000 System registers. */
> diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c
> index fc18212e68..716ca3c7b6 100644
> --- a/hw/arm/spitz.c
> +++ b/hw/arm/spitz.c
> @@ -758,7 +758,7 @@ static void spitz_i2c_setup(PXA2xxState *cpu)
> DeviceState *wm;
>
> /* Attach a WM8750 to the bus */
> - wm = i2c_create_slave(bus, TYPE_WM8750, 0);
> + wm = DEVICE(i2c_slave_create_simple(bus, TYPE_WM8750, 0));
>
> spitz_wm8750_addr(wm, 0, 0);
> qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM,
> @@ -773,7 +773,7 @@ static void spitz_i2c_setup(PXA2xxState *cpu)
> static void spitz_akita_i2c_setup(PXA2xxState *cpu)
> {
> /* Attach a Max7310 to Akita I2C bus. */
> - i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310",
> + i2c_slave_create_simple(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310",
> AKITA_MAX_ADDR);
> }
>
> diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
> index 97ef566c12..3f45550cf6 100644
> --- a/hw/arm/stellaris.c
> +++ b/hw/arm/stellaris.c
> @@ -1380,7 +1380,7 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
> qdev_get_gpio_in(nvic, 8));
> i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
> if (board->peripherals & BP_OLED_I2C) {
> - i2c_create_slave(i2c, "ssd0303", 0x3d);
> + i2c_slave_create_simple(i2c, "ssd0303", 0x3d);
> }
> }
>
> diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c
> index 5dee2d76c6..8c1ee0cdd1 100644
> --- a/hw/arm/tosa.c
> +++ b/hw/arm/tosa.c
> @@ -206,7 +206,7 @@ static uint8_t tosa_dac_recv(I2CSlave *s)
> static void tosa_tg_init(PXA2xxState *cpu)
> {
> I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
> - i2c_create_slave(bus, TYPE_TOSA_DAC, DAC_BASE);
> + i2c_slave_create_simple(bus, TYPE_TOSA_DAC, DAC_BASE);
> ssi_create_slave(cpu->ssp[1], "tosa-ssp");
> }
>
> diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c
> index e596b8170f..34709afb32 100644
> --- a/hw/arm/versatilepb.c
> +++ b/hw/arm/versatilepb.c
> @@ -317,7 +317,7 @@ static void versatile_init(MachineState *machine, int board_id)
>
> dev = sysbus_create_simple(TYPE_VERSATILE_I2C, 0x10002000, NULL);
> i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
> - i2c_create_slave(i2c, "ds1338", 0x68);
> + i2c_slave_create_simple(i2c, "ds1338", 0x68);
>
> /* Add PL041 AACI Interface to the LM4549 codec */
> pl041 = qdev_new("pl041");
> diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
> index 5bf9cff8a8..4f6a2b6ddd 100644
> --- a/hw/arm/vexpress.c
> +++ b/hw/arm/vexpress.c
> @@ -642,7 +642,7 @@ static void vexpress_common_init(MachineState *machine)
>
> dev = sysbus_create_simple(TYPE_VERSATILE_I2C, map[VE_SERIALDVI], NULL);
> i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
> - i2c_create_slave(i2c, "sii9022", 0x39);
> + i2c_slave_create_simple(i2c, "sii9022", 0x39);
>
> sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */
>
> diff --git a/hw/arm/z2.c b/hw/arm/z2.c
> index a0f4095990..8cf8189f6f 100644
> --- a/hw/arm/z2.c
> +++ b/hw/arm/z2.c
> @@ -327,8 +327,8 @@ static void z2_init(MachineState *machine)
> type_register_static(&aer915_info);
> z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd");
> bus = pxa2xx_i2c_bus(mpu->i2c[0]);
> - i2c_create_slave(bus, TYPE_AER915, 0x55);
> - wm = i2c_create_slave(bus, TYPE_WM8750, 0x1b);
> + i2c_slave_create_simple(bus, TYPE_AER915, 0x55);
> + wm = DEVICE(i2c_slave_create_simple(bus, TYPE_WM8750, 0x1b));
> mpu->i2s->opaque = wm;
> mpu->i2s->codec_out = wm8750_dac_dat;
> mpu->i2s->codec_in = wm8750_adc_dat;
> diff --git a/hw/display/sii9022.c b/hw/display/sii9022.c
> index 0710ce9de5..3b82a8567f 100644
> --- a/hw/display/sii9022.c
> +++ b/hw/display/sii9022.c
> @@ -161,7 +161,7 @@ static void sii9022_realize(DeviceState *dev, Error **errp)
> I2CBus *bus;
>
> bus = I2C_BUS(qdev_get_parent_bus(dev));
> - i2c_create_slave(bus, TYPE_I2CDDC, 0x50);
> + i2c_slave_create_simple(bus, TYPE_I2CDDC, 0x50);
> }
>
> static void sii9022_class_init(ObjectClass *klass, void *data)
> diff --git a/hw/i2c/core.c b/hw/i2c/core.c
> index 135ea56036..21ec52ac5a 100644
> --- a/hw/i2c/core.c
> +++ b/hw/i2c/core.c
> @@ -281,11 +281,11 @@ bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp)
> return qdev_realize_and_unref(&dev->qdev, &bus->qbus, errp);
> }
>
> -DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr)
> +I2CSlave *i2c_slave_create_simple(I2CBus *bus, const char *name, uint8_t addr)
> {
> - DeviceState *dev = DEVICE(i2c_slave_new(name, addr));
> + I2CSlave *dev = i2c_slave_new(name, addr);
>
> - i2c_slave_realize_and_unref(I2C_SLAVE(dev), bus, &error_fatal);
> + i2c_slave_realize_and_unref(dev, bus, &error_abort);
>
> return dev;
> }
> diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
> index 51bf95b303..67924915ae 100644
> --- a/hw/ppc/e500.c
> +++ b/hw/ppc/e500.c
> @@ -944,7 +944,7 @@ void ppce500_init(MachineState *machine)
> memory_region_add_subregion(ccsr_addr_space, MPC8544_I2C_REGS_OFFSET,
> sysbus_mmio_get_region(s, 0));
> i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
> - i2c_create_slave(i2c, "ds1338", RTC_REGS_OFFSET);
> + i2c_slave_create_simple(i2c, "ds1338", RTC_REGS_OFFSET);
>
>
> /* General Utility device */
> diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
> index 1a106a68de..1702344c46 100644
> --- a/hw/ppc/sam460ex.c
> +++ b/hw/ppc/sam460ex.c
> @@ -339,7 +339,7 @@ static void sam460ex_init(MachineState *machine)
> spd_data[20] = 4; /* SO-DIMM module */
> smbus_eeprom_init_one(i2c, 0x50, spd_data);
> /* RTC */
> - i2c_create_slave(i2c, "m41t80", 0x68);
> + i2c_slave_create_simple(i2c, "m41t80", 0x68);
>
> dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]);
>
> --
> 2.21.3
>
>
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 4/5] hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()
2020-06-29 17:38 ` [PATCH 4/5] hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple() Philippe Mathieu-Daudé
2020-06-29 21:29 ` Corey Minyard
@ 2020-06-30 9:48 ` Markus Armbruster
1 sibling, 0 replies; 22+ messages in thread
From: Markus Armbruster @ 2020-06-30 9:48 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, qemu-devel,
qemu-arm, qemu-ppc, Cédric Le Goater, Jan Kiszka,
David Gibson, Joel Stanley
Philippe Mathieu-Daudé <f4bug@amsat.org> writes:
> We use "create_simple" names for functions that allocate, initialize,
> configure and realize device objects: pci_create_simple(),
> isa_create_simple(), usb_create_simple(). For consistency, rename
> i2c_create_slave() as i2c_slave_create_simple(). Since we have
> to update all the callers, also let it return a I2CSlave object.
>
> Suggested-by: Markus Armbruster <armbru@redhat.com>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 5/5] hw/i2c: Document the I2C qdev helpers
2020-06-29 17:38 [PATCH 0/5] hw/i2c: Rename method names for consistency and add documentation Philippe Mathieu-Daudé
` (3 preceding siblings ...)
2020-06-29 17:38 ` [PATCH 4/5] hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple() Philippe Mathieu-Daudé
@ 2020-06-29 17:38 ` Philippe Mathieu-Daudé
2020-06-29 21:30 ` Corey Minyard
2020-06-30 10:15 ` Markus Armbruster
2020-06-29 21:28 ` [PATCH 0/5] hw/i2c: Rename method names for consistency and add documentation Corey Minyard
5 siblings, 2 replies; 22+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 17:38 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Philippe Mathieu-Daudé, Corey Minyard,
Andrew Jeffery, Markus Armbruster, Cédric Le Goater,
qemu-arm, qemu-ppc, Joel Stanley, Jan Kiszka, David Gibson
In commit d88c42ff2c we added new prototype but neglected to
add their documentation. Fix that.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
include/hw/i2c/i2c.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
index c533058998..fcc61e509b 100644
--- a/include/hw/i2c/i2c.h
+++ b/include/hw/i2c/i2c.h
@@ -79,8 +79,56 @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send);
int i2c_send(I2CBus *bus, uint8_t data);
uint8_t i2c_recv(I2CBus *bus);
+/**
+ * Create an I2C slave device on the heap.
+ * @name: a device type name
+ * @addr: I2C address of the slave when put on a bus
+ *
+ * This only initializes the device state structure and allows
+ * properties to be set. Type @name must exist. The device still
+ * needs to be realized. See qdev-core.h.
+ */
I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
+
+/**
+ * Create an I2C slave device on the heap.
+ * @bus: I2C bus to put it on
+ * @name: I2C slave device type name
+ * @addr: I2C address of the slave when put on a bus
+ *
+ * Create the device state structure, initialize it, put it on the
+ * specified @bus, and drop the reference to it (the device is realized).
+ * Any error aborts the process.
+ */
I2CSlave *i2c_slave_create_simple(I2CBus *bus, const char *name, uint8_t addr);
+
+/**
+ * i2c_slave_realize_and_unref: realize and unref an I2C slave device
+ * @dev: I2C slave device to realize
+ * @bus: I2C bus to put it on
+ * @addr: I2C address of the slave on the bus
+ * @errp: error pointer
+ *
+ * Call 'realize' on @dev, put it on the specified @bus, and drop the
+ * reference to it. Errors are reported via @errp and by returning
+ * false.
+ *
+ * This function is useful if you have created @dev via qdev_new(),
+ * i2c_slave_new() or i2c_slave_try_new() (which take a reference to
+ * the device it returns to you), so that you can set properties on it
+ * before realizing it. If you don't need to set properties then
+ * i2c_slave_create_simple() is probably better (as it does the create,
+ * init and realize in one step).
+ *
+ * If you are embedding the I2C slave into another QOM device and
+ * initialized it via some variant on object_initialize_child() then
+ * do not use this function, because that family of functions arrange
+ * for the only reference to the child device to be held by the parent
+ * via the child<> property, and so the reference-count-drop done here
+ * would be incorrect. (Instead you would want i2c_slave_realize(),
+ * which doesn't currently exist but would be trivial to create if we
+ * had any code that wanted it.)
+ */
bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp);
/* lm832x.c */
--
2.21.3
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH 5/5] hw/i2c: Document the I2C qdev helpers
2020-06-29 17:38 ` [PATCH 5/5] hw/i2c: Document the I2C qdev helpers Philippe Mathieu-Daudé
@ 2020-06-29 21:30 ` Corey Minyard
2020-06-30 10:15 ` Markus Armbruster
1 sibling, 0 replies; 22+ messages in thread
From: Corey Minyard @ 2020-06-29 21:30 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, qemu-devel,
Markus Armbruster, qemu-arm, qemu-ppc, Cédric Le Goater,
Jan Kiszka, David Gibson, Joel Stanley
On Mon, Jun 29, 2020 at 07:38:21PM +0200, Philippe Mathieu-Daudé wrote:
> In commit d88c42ff2c we added new prototype but neglected to
> add their documentation. Fix that.
Reviewed-by: Corey Minyard <cminyard@mvista.com>
>
> Reported-by: Peter Maydell <peter.maydell@linaro.org>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> include/hw/i2c/i2c.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
> index c533058998..fcc61e509b 100644
> --- a/include/hw/i2c/i2c.h
> +++ b/include/hw/i2c/i2c.h
> @@ -79,8 +79,56 @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send);
> int i2c_send(I2CBus *bus, uint8_t data);
> uint8_t i2c_recv(I2CBus *bus);
>
> +/**
> + * Create an I2C slave device on the heap.
> + * @name: a device type name
> + * @addr: I2C address of the slave when put on a bus
> + *
> + * This only initializes the device state structure and allows
> + * properties to be set. Type @name must exist. The device still
> + * needs to be realized. See qdev-core.h.
> + */
> I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
> +
> +/**
> + * Create an I2C slave device on the heap.
> + * @bus: I2C bus to put it on
> + * @name: I2C slave device type name
> + * @addr: I2C address of the slave when put on a bus
> + *
> + * Create the device state structure, initialize it, put it on the
> + * specified @bus, and drop the reference to it (the device is realized).
> + * Any error aborts the process.
> + */
> I2CSlave *i2c_slave_create_simple(I2CBus *bus, const char *name, uint8_t addr);
> +
> +/**
> + * i2c_slave_realize_and_unref: realize and unref an I2C slave device
> + * @dev: I2C slave device to realize
> + * @bus: I2C bus to put it on
> + * @addr: I2C address of the slave on the bus
> + * @errp: error pointer
> + *
> + * Call 'realize' on @dev, put it on the specified @bus, and drop the
> + * reference to it. Errors are reported via @errp and by returning
> + * false.
> + *
> + * This function is useful if you have created @dev via qdev_new(),
> + * i2c_slave_new() or i2c_slave_try_new() (which take a reference to
> + * the device it returns to you), so that you can set properties on it
> + * before realizing it. If you don't need to set properties then
> + * i2c_slave_create_simple() is probably better (as it does the create,
> + * init and realize in one step).
> + *
> + * If you are embedding the I2C slave into another QOM device and
> + * initialized it via some variant on object_initialize_child() then
> + * do not use this function, because that family of functions arrange
> + * for the only reference to the child device to be held by the parent
> + * via the child<> property, and so the reference-count-drop done here
> + * would be incorrect. (Instead you would want i2c_slave_realize(),
> + * which doesn't currently exist but would be trivial to create if we
> + * had any code that wanted it.)
> + */
> bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp);
>
> /* lm832x.c */
> --
> 2.21.3
>
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 5/5] hw/i2c: Document the I2C qdev helpers
2020-06-29 17:38 ` [PATCH 5/5] hw/i2c: Document the I2C qdev helpers Philippe Mathieu-Daudé
2020-06-29 21:30 ` Corey Minyard
@ 2020-06-30 10:15 ` Markus Armbruster
2020-06-30 10:45 ` Philippe Mathieu-Daudé
2020-06-30 13:16 ` Peter Maydell
1 sibling, 2 replies; 22+ messages in thread
From: Markus Armbruster @ 2020-06-30 10:15 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, qemu-devel,
qemu-arm, qemu-ppc, Cédric Le Goater, Jan Kiszka,
David Gibson, Joel Stanley
Philippe Mathieu-Daudé <f4bug@amsat.org> writes:
> In commit d88c42ff2c we added new prototype but neglected to
> add their documentation. Fix that.
>
> Reported-by: Peter Maydell <peter.maydell@linaro.org>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
> include/hw/i2c/i2c.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
> index c533058998..fcc61e509b 100644
> --- a/include/hw/i2c/i2c.h
> +++ b/include/hw/i2c/i2c.h
> @@ -79,8 +79,56 @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send);
> int i2c_send(I2CBus *bus, uint8_t data);
> uint8_t i2c_recv(I2CBus *bus);
>
> +/**
> + * Create an I2C slave device on the heap.
> + * @name: a device type name
> + * @addr: I2C address of the slave when put on a bus
> + *
> + * This only initializes the device state structure and allows
> + * properties to be set. Type @name must exist. The device still
> + * needs to be realized. See qdev-core.h.
> + */
> I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
> +
> +/**
> + * Create an I2C slave device on the heap.
Suggest "Create and realize ..."
> + * @bus: I2C bus to put it on
> + * @name: I2C slave device type name
> + * @addr: I2C address of the slave when put on a bus
> + *
> + * Create the device state structure, initialize it, put it on the
> + * specified @bus, and drop the reference to it (the device is realized).
> + * Any error aborts the process.
Stick to imperative mood: Abort on error.
Do we need the sentence? Doc comments of object_new(), qdev_new() and
i2c_slave_new() don't have it, they document *preconditions* instead,
using "must", and rely on the tacit understanding that a function may
abort or crash when its documented preconditions aren't met. Matter of
taste, I guess.
> + */
> I2CSlave *i2c_slave_create_simple(I2CBus *bus, const char *name, uint8_t addr);
> +
> +/**
> + * i2c_slave_realize_and_unref: realize and unref an I2C slave device
Either consistently waste space for repeating the function name at the
beginning of its doc comment, or consistently don't :)
qdev_realize_and_unref()'s doc comment says "and drop a reference"
instead of "unref", because "unref" is not a word.
> + * @dev: I2C slave device to realize
> + * @bus: I2C bus to put it on
> + * @addr: I2C address of the slave on the bus
> + * @errp: error pointer
$ git-grep -h "@errp:" | sort -u
* @errp: pointer to Error*, to store an error if it happens
* @errp: error object
* @errp: Error object
* @errp: Error object which may be set by job_complete(); this is not
* @errp: Error object.
* @errp: If an error occurs, a pointer to an area to store the error
* @errp: Output pointer for error information. Can be NULL.
* @errp: Pointer for reporting an #Error.
* @errp: Populated with an error in failure cases
* @errp: a pointer to an Error that is filled if getting/setting fails.
* @errp: a pointer to return the #Error object if an error occurs.
* @errp: an error indicator
* @errp: error
* @errp: error object
* @errp: error object handle
* @errp: handle to an error object
* @errp: if an error occurs, a pointer to an area to store the error
* @errp: indirect pointer to Error to be set
* @errp: location to store error
* @errp: location to store error information
* @errp: location to store error information.
* @errp: location to store error, will be set only for exception
* @errp: pointer to Error*, to store an error if it happens.
* @errp: pointer to NULL initialized error object
* @errp: pointer to a NULL initialized error object
* @errp: pointer to a NULL-initialized error object
* @errp: pointer to an error
* @errp: pointer to error object
* @errp: pointer to initialized error object
* @errp: pointer to uninitialized error object
Aside: gotta love these two.
* @errp: returns an error if this function fails
* @errp: set *errp if the check failed, with reason
* @errp: set in case of an error
* @errp: set on error
* @errp: unused
* @errp: where to put errors
Plenty of choice, recommend not to invent another one :)
> + *
> + * Call 'realize' on @dev, put it on the specified @bus, and drop the
> + * reference to it. Errors are reported via @errp and by returning
> + * false.
Recommend to use a separate paragraph for the return value. Since your
comment style resembles GTK-Doc style[*], you may just as well use it
for the return value, like this:
Returns: %true on success, %false on failure.
By convention, it goes after the function description.
> + *
> + * This function is useful if you have created @dev via qdev_new(),
> + * i2c_slave_new() or i2c_slave_try_new() (which take a reference to
> + * the device it returns to you), so that you can set properties on it
> + * before realizing it. If you don't need to set properties then
> + * i2c_slave_create_simple() is probably better (as it does the create,
> + * init and realize in one step).
> + *
> + * If you are embedding the I2C slave into another QOM device and
> + * initialized it via some variant on object_initialize_child() then
> + * do not use this function, because that family of functions arrange
> + * for the only reference to the child device to be held by the parent
> + * via the child<> property, and so the reference-count-drop done here
> + * would be incorrect. (Instead you would want i2c_slave_realize(),
> + * which doesn't currently exist but would be trivial to create if we
> + * had any code that wanted it.)
> + */
The advice on use is more elaborate qdev_realize_and_unref()'s. That
one simply shows intended use. I doubt we need more. But as the person
who wrote qdev_realize_and_unref(), I'm singularly unqualified judging
the need ;)
> bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp);
>
> /* lm832x.c */
[*] A style I dislike, but it's common in QEMU, so you're certainly
entitled to use it.
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 5/5] hw/i2c: Document the I2C qdev helpers
2020-06-30 10:15 ` Markus Armbruster
@ 2020-06-30 10:45 ` Philippe Mathieu-Daudé
2020-06-30 13:16 ` Peter Maydell
1 sibling, 0 replies; 22+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-30 10:45 UTC (permalink / raw)
To: Markus Armbruster
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, qemu-devel,
Joel Stanley, qemu-arm, qemu-ppc, Cédric Le Goater,
Jan Kiszka, David Gibson
On 6/30/20 12:15 PM, Markus Armbruster wrote:
> Philippe Mathieu-Daudé <f4bug@amsat.org> writes:
>
>> In commit d88c42ff2c we added new prototype but neglected to
>> add their documentation. Fix that.
>>
>> Reported-by: Peter Maydell <peter.maydell@linaro.org>
>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> ---
>> include/hw/i2c/i2c.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 48 insertions(+)
>>
>> diff --git a/include/hw/i2c/i2c.h b/include/hw/i2c/i2c.h
>> index c533058998..fcc61e509b 100644
>> --- a/include/hw/i2c/i2c.h
>> +++ b/include/hw/i2c/i2c.h
>> @@ -79,8 +79,56 @@ int i2c_send_recv(I2CBus *bus, uint8_t *data, bool send);
>> int i2c_send(I2CBus *bus, uint8_t data);
>> uint8_t i2c_recv(I2CBus *bus);
>>
>> +/**
>> + * Create an I2C slave device on the heap.
>> + * @name: a device type name
>> + * @addr: I2C address of the slave when put on a bus
>> + *
>> + * This only initializes the device state structure and allows
>> + * properties to be set. Type @name must exist. The device still
>> + * needs to be realized. See qdev-core.h.
>> + */
>> I2CSlave *i2c_slave_new(const char *name, uint8_t addr);
>> +
>> +/**
>> + * Create an I2C slave device on the heap.
>
> Suggest "Create and realize ..."
>
>> + * @bus: I2C bus to put it on
>> + * @name: I2C slave device type name
>> + * @addr: I2C address of the slave when put on a bus
>> + *
>> + * Create the device state structure, initialize it, put it on the
>> + * specified @bus, and drop the reference to it (the device is realized).
>> + * Any error aborts the process.
>
> Stick to imperative mood: Abort on error.
>
> Do we need the sentence? Doc comments of object_new(), qdev_new() and
> i2c_slave_new() don't have it, they document *preconditions* instead,
> using "must", and rely on the tacit understanding that a function may
> abort or crash when its documented preconditions aren't met. Matter of
> taste, I guess.
>
>> + */
>> I2CSlave *i2c_slave_create_simple(I2CBus *bus, const char *name, uint8_t addr);
>> +
>> +/**
>> + * i2c_slave_realize_and_unref: realize and unref an I2C slave device
>
> Either consistently waste space for repeating the function name at the
> beginning of its doc comment, or consistently don't :)
>
> qdev_realize_and_unref()'s doc comment says "and drop a reference"
> instead of "unref", because "unref" is not a word.
>
>> + * @dev: I2C slave device to realize
>> + * @bus: I2C bus to put it on
>> + * @addr: I2C address of the slave on the bus
>> + * @errp: error pointer
>
> $ git-grep -h "@errp:" | sort -u
> * @errp: pointer to Error*, to store an error if it happens
> * @errp: error object
> * @errp: Error object
> * @errp: Error object which may be set by job_complete(); this is not
> * @errp: Error object.
> * @errp: If an error occurs, a pointer to an area to store the error
> * @errp: Output pointer for error information. Can be NULL.
> * @errp: Pointer for reporting an #Error.
> * @errp: Populated with an error in failure cases
> * @errp: a pointer to an Error that is filled if getting/setting fails.
> * @errp: a pointer to return the #Error object if an error occurs.
> * @errp: an error indicator
> * @errp: error
> * @errp: error object
> * @errp: error object handle
> * @errp: handle to an error object
> * @errp: if an error occurs, a pointer to an area to store the error
> * @errp: indirect pointer to Error to be set
> * @errp: location to store error
> * @errp: location to store error information
> * @errp: location to store error information.
> * @errp: location to store error, will be set only for exception
> * @errp: pointer to Error*, to store an error if it happens.
> * @errp: pointer to NULL initialized error object
> * @errp: pointer to a NULL initialized error object
> * @errp: pointer to a NULL-initialized error object
> * @errp: pointer to an error
> * @errp: pointer to error object
> * @errp: pointer to initialized error object
> * @errp: pointer to uninitialized error object
>
> Aside: gotta love these two.
>
> * @errp: returns an error if this function fails
> * @errp: set *errp if the check failed, with reason
> * @errp: set in case of an error
> * @errp: set on error
> * @errp: unused
> * @errp: where to put errors
>
> Plenty of choice, recommend not to invent another one :)
>
>> + *
>> + * Call 'realize' on @dev, put it on the specified @bus, and drop the
>> + * reference to it. Errors are reported via @errp and by returning
>> + * false.
>
> Recommend to use a separate paragraph for the return value. Since your
> comment style resembles GTK-Doc style[*], you may just as well use it
> for the return value, like this:
>
> Returns: %true on success, %false on failure.
>
> By convention, it goes after the function description.
OK, I'll use whatever you prefer. Maybe the shorter the easier.
I will see if I can find to spend more time on this during the
week-end, but I can't promise anything. Anyway since it is
documentation it can be integrated during soft freeze.
Thanks for your detailed review.
>
>> + *
>> + * This function is useful if you have created @dev via qdev_new(),
>> + * i2c_slave_new() or i2c_slave_try_new() (which take a reference to
>> + * the device it returns to you), so that you can set properties on it
>> + * before realizing it. If you don't need to set properties then
>> + * i2c_slave_create_simple() is probably better (as it does the create,
>> + * init and realize in one step).
>> + *
>> + * If you are embedding the I2C slave into another QOM device and
>> + * initialized it via some variant on object_initialize_child() then
>> + * do not use this function, because that family of functions arrange
>> + * for the only reference to the child device to be held by the parent
>> + * via the child<> property, and so the reference-count-drop done here
>> + * would be incorrect. (Instead you would want i2c_slave_realize(),
>> + * which doesn't currently exist but would be trivial to create if we
>> + * had any code that wanted it.)
>> + */
>
> The advice on use is more elaborate qdev_realize_and_unref()'s. That
> one simply shows intended use. I doubt we need more. But as the person
> who wrote qdev_realize_and_unref(), I'm singularly unqualified judging
> the need ;)
>
>> bool i2c_slave_realize_and_unref(I2CSlave *dev, I2CBus *bus, Error **errp);
>>
>> /* lm832x.c */
>
>
> [*] A style I dislike, but it's common in QEMU, so you're certainly
> entitled to use it.
>
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 5/5] hw/i2c: Document the I2C qdev helpers
2020-06-30 10:15 ` Markus Armbruster
2020-06-30 10:45 ` Philippe Mathieu-Daudé
@ 2020-06-30 13:16 ` Peter Maydell
2020-07-14 7:05 ` Markus Armbruster
1 sibling, 1 reply; 22+ messages in thread
From: Peter Maydell @ 2020-06-30 13:16 UTC (permalink / raw)
To: Markus Armbruster
Cc: Corey Minyard, Andrew Jeffery, Philippe Mathieu-Daudé,
QEMU Developers, qemu-arm, qemu-ppc, Cédric Le Goater,
Jan Kiszka, David Gibson, Joel Stanley
On Tue, 30 Jun 2020 at 11:15, Markus Armbruster <armbru@redhat.com> wrote:
>
> Philippe Mathieu-Daudé <f4bug@amsat.org> writes:
>
> > In commit d88c42ff2c we added new prototype but neglected to
> > add their documentation. Fix that.
> >
> > Reported-by: Peter Maydell <peter.maydell@linaro.org>
> > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > + * This function is useful if you have created @dev via qdev_new(),
> > + * i2c_slave_new() or i2c_slave_try_new() (which take a reference to
> > + * the device it returns to you), so that you can set properties on it
> > + * before realizing it. If you don't need to set properties then
> > + * i2c_slave_create_simple() is probably better (as it does the create,
> > + * init and realize in one step).
> > + *
> > + * If you are embedding the I2C slave into another QOM device and
> > + * initialized it via some variant on object_initialize_child() then
> > + * do not use this function, because that family of functions arrange
> > + * for the only reference to the child device to be held by the parent
> > + * via the child<> property, and so the reference-count-drop done here
> > + * would be incorrect. (Instead you would want i2c_slave_realize(),
> > + * which doesn't currently exist but would be trivial to create if we
> > + * had any code that wanted it.)
> > + */
>
> The advice on use is more elaborate qdev_realize_and_unref()'s. That
> one simply shows intended use. I doubt we need more. But as the person
> who wrote qdev_realize_and_unref(), I'm singularly unqualified judging
> the need ;)
If qdev_realize_and_unref() has documentation which gives
the use-cases similar to the text above, then we could make
this text say "This function follows the patterns and
intended usecases for qdev_realize_and_unref(); see the
documentation for that function for whether you would be
better off using i2c_realize() or (the not-yet-existing)
i2c_slave_realize()" or similar. I originally wrote the
version of the above text for ssi_realize_and_unref()
as essentially the documentation I would have liked
qdev_realize_and_unref() to have, ie including the nuances
which I had to figure out for myself.
thanks
-- PMM
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 5/5] hw/i2c: Document the I2C qdev helpers
2020-06-30 13:16 ` Peter Maydell
@ 2020-07-14 7:05 ` Markus Armbruster
2020-07-14 9:32 ` Peter Maydell
0 siblings, 1 reply; 22+ messages in thread
From: Markus Armbruster @ 2020-07-14 7:05 UTC (permalink / raw)
To: Peter Maydell
Cc: Corey Minyard, Andrew Jeffery, Joel Stanley,
Philippe Mathieu-Daudé, QEMU Developers, qemu-arm, qemu-ppc,
Cédric Le Goater, Jan Kiszka, David Gibson
Peter Maydell <peter.maydell@linaro.org> writes:
> On Tue, 30 Jun 2020 at 11:15, Markus Armbruster <armbru@redhat.com> wrote:
>>
>> Philippe Mathieu-Daudé <f4bug@amsat.org> writes:
>>
>> > In commit d88c42ff2c we added new prototype but neglected to
>> > add their documentation. Fix that.
>> >
>> > Reported-by: Peter Maydell <peter.maydell@linaro.org>
>> > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>
>> > + * This function is useful if you have created @dev via qdev_new(),
>> > + * i2c_slave_new() or i2c_slave_try_new() (which take a reference to
>> > + * the device it returns to you), so that you can set properties on it
>> > + * before realizing it. If you don't need to set properties then
>> > + * i2c_slave_create_simple() is probably better (as it does the create,
>> > + * init and realize in one step).
>> > + *
>> > + * If you are embedding the I2C slave into another QOM device and
>> > + * initialized it via some variant on object_initialize_child() then
>> > + * do not use this function, because that family of functions arrange
>> > + * for the only reference to the child device to be held by the parent
>> > + * via the child<> property, and so the reference-count-drop done here
>> > + * would be incorrect. (Instead you would want i2c_slave_realize(),
>> > + * which doesn't currently exist but would be trivial to create if we
>> > + * had any code that wanted it.)
>> > + */
>>
>> The advice on use is more elaborate qdev_realize_and_unref()'s. That
>> one simply shows intended use. I doubt we need more. But as the person
>> who wrote qdev_realize_and_unref(), I'm singularly unqualified judging
>> the need ;)
>
> If qdev_realize_and_unref() has documentation which gives
> the use-cases similar to the text above, then we could make
> this text say "This function follows the patterns and
> intended usecases for qdev_realize_and_unref(); see the
> documentation for that function for whether you would be
> better off using i2c_realize() or (the not-yet-existing)
> i2c_slave_realize()" or similar. I originally wrote the
> version of the above text for ssi_realize_and_unref()
> as essentially the documentation I would have liked
> qdev_realize_and_unref() to have, ie including the nuances
> which I had to figure out for myself.
To document wrappers as simple as ssi_realize_and_unref(), pointing to
the wrapped function should suffice. When more elaborate documentation
is wanted, it's probably wanted for the wrapped function.
Since you felt a need for a more elaborate ssi_realize_and_unref() doc
comment, you should probably propose a patch for
qdev_realize_and_unref()'s doc comment :)
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 5/5] hw/i2c: Document the I2C qdev helpers
2020-07-14 7:05 ` Markus Armbruster
@ 2020-07-14 9:32 ` Peter Maydell
0 siblings, 0 replies; 22+ messages in thread
From: Peter Maydell @ 2020-07-14 9:32 UTC (permalink / raw)
To: Markus Armbruster
Cc: Corey Minyard, Andrew Jeffery, Joel Stanley,
Philippe Mathieu-Daudé, QEMU Developers, qemu-arm, qemu-ppc,
Cédric Le Goater, Jan Kiszka, David Gibson
On Tue, 14 Jul 2020 at 08:06, Markus Armbruster <armbru@redhat.com> wrote:
> Since you felt a need for a more elaborate ssi_realize_and_unref() doc
> comment, you should probably propose a patch for
> qdev_realize_and_unref()'s doc comment :)
Yes, that's part of
https://patchew.org/QEMU/20200711142425.16283-1-peter.maydell@linaro.org/20200711142425.16283-2-peter.maydell@linaro.org/
thanks
-- PMM
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 0/5] hw/i2c: Rename method names for consistency and add documentation
2020-06-29 17:38 [PATCH 0/5] hw/i2c: Rename method names for consistency and add documentation Philippe Mathieu-Daudé
` (4 preceding siblings ...)
2020-06-29 17:38 ` [PATCH 5/5] hw/i2c: Document the I2C qdev helpers Philippe Mathieu-Daudé
@ 2020-06-29 21:28 ` Corey Minyard
5 siblings, 0 replies; 22+ messages in thread
From: Corey Minyard @ 2020-06-29 21:28 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Corey Minyard, Andrew Jeffery, qemu-devel,
Markus Armbruster, qemu-arm, qemu-ppc, Cédric Le Goater,
Jan Kiszka, David Gibson, Joel Stanley
On Mon, Jun 29, 2020 at 07:38:16PM +0200, Philippe Mathieu-Daudé wrote:
> In commit d88c42ff2c we added 2 methods: i2c_try_create_slave()
> and i2c_realize_and_unref().
> Markus noted their name could be improved for consistency [1],
> and Peter reported the lack of documentation [2]. Fix that now.
Looking over these, I don't see an issue. I didn't review the aspeed
device changes (patch 1); that's probably better for the aspeed
maintainer to review.
But I do like the improvement in consistency.
-corey
>
> [1] https://lists.gnu.org/archive/html/qemu-devel/2020-06/msg07060.html
> [2] https://lists.gnu.org/archive/html/qemu-devel/2020-06/msg08997.html
>
> Philippe Mathieu-Daudé (5):
> hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus()
> hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new()
> hw/i2c: Rename i2c_realize_and_unref() as
> i2c_slave_realize_and_unref()
> hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()
> hw/i2c: Document the I2C qdev helpers
>
> include/hw/i2c/aspeed_i2c.h | 2 +-
> include/hw/i2c/i2c.h | 54 ++++++++++++++++++++++--
> hw/arm/aspeed.c | 82 +++++++++++++++++++------------------
> hw/arm/musicpal.c | 4 +-
> hw/arm/nseries.c | 8 ++--
> hw/arm/pxa2xx.c | 5 ++-
> hw/arm/realview.c | 2 +-
> hw/arm/spitz.c | 4 +-
> hw/arm/stellaris.c | 2 +-
> hw/arm/tosa.c | 2 +-
> hw/arm/versatilepb.c | 2 +-
> hw/arm/vexpress.c | 2 +-
> hw/arm/z2.c | 4 +-
> hw/display/sii9022.c | 2 +-
> hw/i2c/aspeed_i2c.c | 3 +-
> hw/i2c/core.c | 15 ++++---
> hw/ppc/e500.c | 2 +-
> hw/ppc/sam460ex.c | 2 +-
> 18 files changed, 123 insertions(+), 74 deletions(-)
>
> --
> 2.21.3
>
>
^ permalink raw reply [flat|nested] 22+ messages in thread