From: "Alex Bennée" <alex.bennee@linaro.org>
To: Niek Linnenbank <nieklinnenbank@gmail.com>
Cc: peter.maydell@linaro.org, jasowang@redhat.com,
qemu-devel@nongnu.org, b.galvani@gmail.com, qemu-arm@nongnu.org,
imammedo@redhat.com, philmd@redhat.com
Subject: Re: [PATCH v6 05/18] hw/arm/allwinner-h3: add System Control module
Date: Tue, 03 Mar 2020 12:01:15 +0000 [thread overview]
Message-ID: <87ftep7ilw.fsf@linaro.org> (raw)
In-Reply-To: <20200301215029.15196-6-nieklinnenbank@gmail.com>
Niek Linnenbank <nieklinnenbank@gmail.com> writes:
> The Allwinner H3 System on Chip has an System Control
> module that provides system wide generic controls and
> device information. This commit adds support for the
> Allwinner H3 System Control module.
>
> Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> include/hw/arm/allwinner-h3.h | 3 +
> include/hw/misc/allwinner-h3-sysctrl.h | 67 ++++++++++++
> hw/arm/allwinner-h3.c | 9 +-
> hw/misc/allwinner-h3-sysctrl.c | 140 +++++++++++++++++++++++++
> hw/misc/Makefile.objs | 1 +
> 5 files changed, 219 insertions(+), 1 deletion(-)
> create mode 100644 include/hw/misc/allwinner-h3-sysctrl.h
> create mode 100644 hw/misc/allwinner-h3-sysctrl.c
>
> diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h
> index 4f4dcbcd17..43500c4262 100644
> --- a/include/hw/arm/allwinner-h3.h
> +++ b/include/hw/arm/allwinner-h3.h
> @@ -40,6 +40,7 @@
> #include "hw/timer/allwinner-a10-pit.h"
> #include "hw/intc/arm_gic.h"
> #include "hw/misc/allwinner-h3-ccu.h"
> +#include "hw/misc/allwinner-h3-sysctrl.h"
> #include "target/arm/cpu.h"
>
> /**
> @@ -56,6 +57,7 @@ enum {
> AW_H3_SRAM_A1,
> AW_H3_SRAM_A2,
> AW_H3_SRAM_C,
> + AW_H3_SYSCTRL,
> AW_H3_EHCI0,
> AW_H3_OHCI0,
> AW_H3_EHCI1,
> @@ -108,6 +110,7 @@ typedef struct AwH3State {
> const hwaddr *memmap;
> AwA10PITState timer;
> AwH3ClockCtlState ccu;
> + AwH3SysCtrlState sysctrl;
> GICState gic;
> MemoryRegion sram_a1;
> MemoryRegion sram_a2;
> diff --git a/include/hw/misc/allwinner-h3-sysctrl.h b/include/hw/misc/allwinner-h3-sysctrl.h
> new file mode 100644
> index 0000000000..af4119e026
> --- /dev/null
> +++ b/include/hw/misc/allwinner-h3-sysctrl.h
> @@ -0,0 +1,67 @@
> +/*
> + * Allwinner H3 System Control emulation
> + *
> + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef HW_MISC_ALLWINNER_H3_SYSCTRL_H
> +#define HW_MISC_ALLWINNER_H3_SYSCTRL_H
> +
> +#include "qom/object.h"
> +#include "hw/sysbus.h"
> +
> +/**
> + * @name Constants
> + * @{
> + */
> +
> +/** Highest register address used by System Control device */
> +#define AW_H3_SYSCTRL_REGS_MAXADDR (0x30)
> +
> +/** Total number of known registers */
> +#define AW_H3_SYSCTRL_REGS_NUM ((AW_H3_SYSCTRL_REGS_MAXADDR / \
> + sizeof(uint32_t)) + 1)
> +
> +/** @} */
> +
> +/**
> + * @name Object model
> + * @{
> + */
> +
> +#define TYPE_AW_H3_SYSCTRL "allwinner-h3-sysctrl"
> +#define AW_H3_SYSCTRL(obj) \
> + OBJECT_CHECK(AwH3SysCtrlState, (obj), TYPE_AW_H3_SYSCTRL)
> +
> +/** @} */
> +
> +/**
> + * Allwinner H3 System Control object instance state
> + */
> +typedef struct AwH3SysCtrlState {
> + /*< private >*/
> + SysBusDevice parent_obj;
> + /*< public >*/
> +
> + /** Maps I/O registers in physical memory */
> + MemoryRegion iomem;
> +
> + /** Array of hardware registers */
> + uint32_t regs[AW_H3_SYSCTRL_REGS_NUM];
> +
> +} AwH3SysCtrlState;
> +
> +#endif /* HW_MISC_ALLWINNER_H3_SYSCTRL_H */
> diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c
> index c205f06738..0aa46712db 100644
> --- a/hw/arm/allwinner-h3.c
> +++ b/hw/arm/allwinner-h3.c
> @@ -37,6 +37,7 @@ const hwaddr allwinner_h3_memmap[] = {
> [AW_H3_SRAM_A1] = 0x00000000,
> [AW_H3_SRAM_A2] = 0x00044000,
> [AW_H3_SRAM_C] = 0x00010000,
> + [AW_H3_SYSCTRL] = 0x01c00000,
> [AW_H3_EHCI0] = 0x01c1a000,
> [AW_H3_OHCI0] = 0x01c1a400,
> [AW_H3_EHCI1] = 0x01c1b000,
> @@ -66,7 +67,6 @@ struct AwH3Unimplemented {
> } unimplemented[] = {
> { "d-engine", 0x01000000, 4 * MiB },
> { "d-inter", 0x01400000, 128 * KiB },
> - { "syscon", 0x01c00000, 4 * KiB },
> { "dma", 0x01c02000, 4 * KiB },
> { "nfdc", 0x01c03000, 4 * KiB },
> { "ts", 0x01c06000, 4 * KiB },
> @@ -192,6 +192,9 @@ static void allwinner_h3_init(Object *obj)
>
> sysbus_init_child_obj(obj, "ccu", &s->ccu, sizeof(s->ccu),
> TYPE_AW_H3_CCU);
> +
> + sysbus_init_child_obj(obj, "sysctrl", &s->sysctrl, sizeof(s->sysctrl),
> + TYPE_AW_H3_SYSCTRL);
> }
>
> static void allwinner_h3_realize(DeviceState *dev, Error **errp)
> @@ -301,6 +304,10 @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp)
> qdev_init_nofail(DEVICE(&s->ccu));
> sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccu), 0, s->memmap[AW_H3_CCU]);
>
> + /* System Control */
> + qdev_init_nofail(DEVICE(&s->sysctrl));
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysctrl), 0, s->memmap[AW_H3_SYSCTRL]);
> +
> /* Universal Serial Bus */
> sysbus_create_simple(TYPE_AW_H3_EHCI, s->memmap[AW_H3_EHCI0],
> qdev_get_gpio_in(DEVICE(&s->gic),
> diff --git a/hw/misc/allwinner-h3-sysctrl.c b/hw/misc/allwinner-h3-sysctrl.c
> new file mode 100644
> index 0000000000..1d07efa880
> --- /dev/null
> +++ b/hw/misc/allwinner-h3-sysctrl.c
> @@ -0,0 +1,140 @@
> +/*
> + * Allwinner H3 System Control emulation
> + *
> + * Copyright (C) 2019 Niek Linnenbank <nieklinnenbank@gmail.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/units.h"
> +#include "hw/sysbus.h"
> +#include "migration/vmstate.h"
> +#include "qemu/log.h"
> +#include "qemu/module.h"
> +#include "hw/misc/allwinner-h3-sysctrl.h"
> +
> +/* System Control register offsets */
> +enum {
> + REG_VER = 0x24, /* Version */
> + REG_EMAC_PHY_CLK = 0x30, /* EMAC PHY Clock */
> +};
> +
> +#define REG_INDEX(offset) (offset / sizeof(uint32_t))
> +
> +/* System Control register reset values */
> +enum {
> + REG_VER_RST = 0x0,
> + REG_EMAC_PHY_CLK_RST = 0x58000,
> +};
> +
> +static uint64_t allwinner_h3_sysctrl_read(void *opaque, hwaddr offset,
> + unsigned size)
> +{
> + const AwH3SysCtrlState *s = AW_H3_SYSCTRL(opaque);
> + const uint32_t idx = REG_INDEX(offset);
> +
> + if (idx >= AW_H3_SYSCTRL_REGS_NUM) {
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n",
> + __func__, (uint32_t)offset);
> + return 0;
> + }
> +
> + return s->regs[idx];
> +}
> +
> +static void allwinner_h3_sysctrl_write(void *opaque, hwaddr offset,
> + uint64_t val, unsigned size)
> +{
> + AwH3SysCtrlState *s = AW_H3_SYSCTRL(opaque);
> + const uint32_t idx = REG_INDEX(offset);
> +
> + if (idx >= AW_H3_SYSCTRL_REGS_NUM) {
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n",
> + __func__, (uint32_t)offset);
> + return;
> + }
> +
> + switch (offset) {
> + case REG_VER: /* Version */
> + break;
> + default:
> + s->regs[idx] = (uint32_t) val;
> + break;
> + }
> +}
> +
> +static const MemoryRegionOps allwinner_h3_sysctrl_ops = {
> + .read = allwinner_h3_sysctrl_read,
> + .write = allwinner_h3_sysctrl_write,
> + .endianness = DEVICE_NATIVE_ENDIAN,
> + .valid = {
> + .min_access_size = 4,
> + .max_access_size = 4,
> + },
> + .impl.min_access_size = 4,
> +};
> +
> +static void allwinner_h3_sysctrl_reset(DeviceState *dev)
> +{
> + AwH3SysCtrlState *s = AW_H3_SYSCTRL(dev);
> +
> + /* Set default values for registers */
> + s->regs[REG_INDEX(REG_VER)] = REG_VER_RST;
> + s->regs[REG_INDEX(REG_EMAC_PHY_CLK)] = REG_EMAC_PHY_CLK_RST;
> +}
> +
> +static void allwinner_h3_sysctrl_init(Object *obj)
> +{
> + SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
> + AwH3SysCtrlState *s = AW_H3_SYSCTRL(obj);
> +
> + /* Memory mapping */
> + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_h3_sysctrl_ops, s,
> + TYPE_AW_H3_SYSCTRL, 4 * KiB);
> + sysbus_init_mmio(sbd, &s->iomem);
> +}
> +
> +static const VMStateDescription allwinner_h3_sysctrl_vmstate = {
> + .name = "allwinner-h3-sysctrl",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_UINT32_ARRAY(regs, AwH3SysCtrlState, AW_H3_SYSCTRL_REGS_NUM),
> + VMSTATE_END_OF_LIST()
> + }
> +};
> +
> +static void allwinner_h3_sysctrl_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> +
> + dc->reset = allwinner_h3_sysctrl_reset;
> + dc->vmsd = &allwinner_h3_sysctrl_vmstate;
> +}
> +
> +static const TypeInfo allwinner_h3_sysctrl_info = {
> + .name = TYPE_AW_H3_SYSCTRL,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_init = allwinner_h3_sysctrl_init,
> + .instance_size = sizeof(AwH3SysCtrlState),
> + .class_init = allwinner_h3_sysctrl_class_init,
> +};
> +
> +static void allwinner_h3_sysctrl_register(void)
> +{
> + type_register_static(&allwinner_h3_sysctrl_info);
> +}
> +
> +type_init(allwinner_h3_sysctrl_register)
> diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
> index 5e635b74d5..63b2e528f9 100644
> --- a/hw/misc/Makefile.objs
> +++ b/hw/misc/Makefile.objs
> @@ -29,6 +29,7 @@ common-obj-$(CONFIG_MACIO) += macio/
> common-obj-$(CONFIG_IVSHMEM_DEVICE) += ivshmem.o
>
> common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-ccu.o
> +common-obj-$(CONFIG_ALLWINNER_H3) += allwinner-h3-sysctrl.o
> common-obj-$(CONFIG_REALVIEW) += arm_sysctl.o
> common-obj-$(CONFIG_NSERIES) += cbus.o
> common-obj-$(CONFIG_ECCMEMCTL) += eccmemctl.o
--
Alex Bennée
next prev parent reply other threads:[~2020-03-03 12:02 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-01 21:50 [PATCH v6 00/18] Add Allwinner H3 SoC and Orange Pi PC Machine Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 01/18] hw/arm: add Allwinner H3 System-on-Chip Niek Linnenbank
2020-03-03 10:53 ` Alex Bennée
2020-03-01 21:50 ` [PATCH v6 02/18] hw/arm: add Xunlong Orange Pi PC machine Niek Linnenbank
2020-03-03 11:02 ` Alex Bennée
2020-03-01 21:50 ` [PATCH v6 03/18] hw/arm/allwinner-h3: add Clock Control Unit Niek Linnenbank
2020-03-03 11:10 ` Alex Bennée
2020-03-01 21:50 ` [PATCH v6 04/18] hw/arm/allwinner-h3: add USB host controller Niek Linnenbank
2020-03-03 11:11 ` Alex Bennée
2020-03-01 21:50 ` [PATCH v6 05/18] hw/arm/allwinner-h3: add System Control module Niek Linnenbank
2020-03-03 12:01 ` Alex Bennée [this message]
2020-03-01 21:50 ` [PATCH v6 06/18] hw/arm/allwinner: add CPU Configuration module Niek Linnenbank
2020-03-03 12:09 ` Alex Bennée
2020-03-03 20:15 ` Niek Linnenbank
2020-03-09 11:18 ` Peter Maydell
2020-03-10 19:30 ` Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 07/18] hw/arm/allwinner: add Security Identifier device Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 08/18] hw/arm/allwinner: add SD/MMC host controller Niek Linnenbank
2020-03-03 12:34 ` Alex Bennée
2020-03-01 21:50 ` [PATCH v6 09/18] hw/arm/allwinner-h3: add EMAC ethernet device Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 10/18] hw/arm/allwinner-h3: add Boot ROM support Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 11/18] hw/arm/allwinner-h3: add SDRAM controller device Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 12/18] hw/arm/allwinner: add RTC device support Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 13/18] tests/boot_linux_console: Add a quick test for the OrangePi PC board Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 14/18] tests/boot_linux_console: Add initrd test for the Orange Pi " Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 15/18] tests/boot_linux_console: Add a SD card test for the OrangePi " Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 16/18] tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 17/18] tests/boot_linux_console: Test booting NetBSD via U-Boot " Niek Linnenbank
2020-03-01 21:50 ` [PATCH v6 18/18] docs: add Orange Pi PC document Niek Linnenbank
2020-03-04 10:35 ` Alex Bennée
2020-03-04 20:55 ` Niek Linnenbank
2020-03-09 11:21 ` Peter Maydell
2020-03-09 19:38 ` Niek Linnenbank
2020-03-09 19:42 ` Peter Maydell
2020-03-09 20:05 ` Niek Linnenbank
2020-03-09 20:12 ` Peter Maydell
2020-03-09 20:47 ` Niek Linnenbank
2020-03-09 22:01 ` Peter Maydell
2020-03-10 19:09 ` Niek Linnenbank
2020-03-09 19:35 ` Niek Linnenbank
2020-03-10 8:15 ` Alex Bennée
2020-03-10 19:10 ` Niek Linnenbank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ftep7ilw.fsf@linaro.org \
--to=alex.bennee@linaro.org \
--cc=b.galvani@gmail.com \
--cc=imammedo@redhat.com \
--cc=jasowang@redhat.com \
--cc=nieklinnenbank@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@redhat.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).