From: "Alex Bennée" <alex.bennee@linaro.org>
To: Alistair Francis <alistair.francis@xilinx.com>
Cc: edgar.iglesias@xilinx.com, peter.maydell@linaro.org,
qemu-devel@nongnu.org, crosthwaitepeter@gmail.com,
edgar.iglesias@gmail.com, afaerber@suse.de,
fred.konrad@greensocs.com
Subject: Re: [Qemu-devel] [PATCH v3 06/16] register: QOMify
Date: Tue, 09 Feb 2016 11:49:13 +0000 [thread overview]
Message-ID: <87fux2w1c6.fsf@linaro.org> (raw)
In-Reply-To: <6c273c2fd27808974c51bf3562beed6e403364c3.1454115217.git.alistair.francis@xilinx.com>
Alistair Francis <alistair.francis@xilinx.com> writes:
> From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
>
> QOMify registers as a child of TYPE_DEVICE. This allows registers to
> define GPIOs.
>
> Define an init helper that will do QOM initialisation as well as setup
> the r/w fast paths.
I don't know if there has been bit-rot since posting but this currently
doesn't build:
CC hw/core/register.o
hw/core/register.c:394:1: error: return type defaults to ‘int’ [-Werror=return-type]
type_init(register_register_types)
^
hw/core/register.c:394:1: error: function declaration isn’t a prototype [-Werror=strict-prototypes]
hw/core/register.c: In function ‘type_init’:
hw/core/register.c:394:1: error: old-style function definition [-Werror=old-style-definition]
hw/core/register.c:394:1: error: expected ‘{’ at end of input
hw/core/register.c: At top level:
hw/core/register.c:389:13: error: ‘register_register_types’ defined but not used [-Werror=unused-function]
static void register_register_types(void)
^
hw/core/register.c: In function ‘type_init’:
hw/core/register.c:394:1: error: control reaches end of non-void function [-Werror=return-type]
type_init(register_register_types)
^
cc1: all warnings being treated as errors
make: *** [hw/core/register.o] Error 1
make: Target `all' not remade because of errors.
>
> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
> Reviewed-by: KONRAD Frederic <fred.konrad@greensocs.com>
> ---
>
> hw/core/register.c | 34 ++++++++++++++++++++++++++++++++++
> include/hw/register.h | 14 ++++++++++++++
> 2 files changed, 48 insertions(+)
>
> diff --git a/hw/core/register.c b/hw/core/register.c
> index e696c43..939f398 100644
> --- a/hw/core/register.c
> +++ b/hw/core/register.c
> @@ -188,6 +188,28 @@ void register_reset(RegisterInfo *reg)
> register_write_val(reg, reg->access->reset);
> }
>
> +void register_init(RegisterInfo *reg)
> +{
> + assert(reg);
> + const RegisterAccessInfo *ac;
> +
> + if (!reg->data || !reg->access) {
> + return;
> + }
> +
> + object_initialize((void *)reg, sizeof(*reg), TYPE_REGISTER);
> +
> + ac = reg->access;
> +
> + /* if there are no debug msgs and no RMW requirement, mark for fast write */
> + reg->write_lite = reg->debug || ac->ro || ac->w1c || ac->pre_write ||
> + ((ac->ge0 || ac->ge1) && qemu_loglevel_mask(LOG_GUEST_ERROR)) ||
> + ((ac->ui0 || ac->ui1) && qemu_loglevel_mask(LOG_UNIMP))
> + ? false : true;
> + /* no debug and no clear-on-read is a fast read */
> + reg->read_lite = reg->debug || ac->cor ? false : true;
> +}
> +
> static inline void register_write_memory(void *opaque, hwaddr addr,
> uint64_t value, unsigned size, bool be)
> {
> @@ -235,3 +257,15 @@ uint64_t register_read_memory_le(void *opaque, hwaddr addr, unsigned size)
> {
> return register_read_memory(opaque, addr, size, false);
> }
> +
> +static const TypeInfo register_info = {
> + .name = TYPE_REGISTER,
> + .parent = TYPE_DEVICE,
> +};
> +
> +static void register_register_types(void)
> +{
> + type_register_static(®ister_info);
> +}
> +
> +type_init(register_register_types)
> diff --git a/include/hw/register.h b/include/hw/register.h
> index 38ee6f5..3316458 100644
> --- a/include/hw/register.h
> +++ b/include/hw/register.h
> @@ -11,6 +11,7 @@
> #ifndef REGISTER_H
> #define REGISTER_H
>
> +#include "hw/qdev-core.h"
> #include "exec/memory.h"
>
> typedef struct RegisterInfo RegisterInfo;
> @@ -101,6 +102,8 @@ struct RegisterAccessInfo {
>
> struct RegisterInfo {
> /* <private> */
> + DeviceState parent_obj;
> +
> bool read_lite;
> bool write_lite;
>
> @@ -118,6 +121,9 @@ struct RegisterInfo {
> void *opaque;
> };
>
> +#define TYPE_REGISTER "qemu,register"
> +#define REGISTER(obj) OBJECT_CHECK(RegisterInfo, (obj), TYPE_REGISTER)
> +
> /**
> * write a value to a register, subject to its restrictions
> * @reg: register to write to
> @@ -143,6 +149,14 @@ uint64_t register_read(RegisterInfo *reg);
> void register_reset(RegisterInfo *reg);
>
> /**
> + * Initialize a register. GPIO's are setup as IOs to the specified device.
> + * Fast paths for eligible registers are enabled.
> + * @reg: Register to initialize
> + */
> +
> +void register_init(RegisterInfo *reg);
> +
> +/**
> * Memory API MMIO write handler that will write to a Register API register.
> * _be for big endian variant and _le for little endian.
> * @opaque: RegisterInfo to write to
--
Alex Bennée
next prev parent reply other threads:[~2016-02-09 11:49 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-30 1:00 [Qemu-devel] [PATCH v3 00/16] data-driven device registers Alistair Francis
2016-01-30 1:00 ` [Qemu-devel] [PATCH v3 01/16] memory: Allow subregions to not be printed by info mtree Alistair Francis
2016-01-30 1:00 ` [Qemu-devel] [PATCH v3 02/16] register: Add Register API Alistair Francis
2016-02-09 16:06 ` Alex Bennée
2016-02-09 19:35 ` Alistair Francis
2016-02-09 22:29 ` Peter Crosthwaite
2016-01-30 1:00 ` [Qemu-devel] [PATCH v3 03/16] register: Add Memory API glue Alistair Francis
2016-01-30 1:00 ` [Qemu-devel] [PATCH v3 04/16] register: Add support for decoding information Alistair Francis
2016-01-30 1:00 ` [Qemu-devel] [PATCH v3 05/16] register: Define REG and FIELD macros Alistair Francis
2016-01-30 1:00 ` [Qemu-devel] [PATCH v3 06/16] register: QOMify Alistair Francis
2016-02-09 11:49 ` Alex Bennée [this message]
2016-02-09 18:09 ` Alistair Francis
2016-01-30 1:00 ` [Qemu-devel] [PATCH v3 07/16] register: Add block initialise helper Alistair Francis
2016-02-09 16:12 ` Alex Bennée
2016-02-09 19:50 ` Alistair Francis
2016-01-30 1:01 ` [Qemu-devel] [PATCH v3 08/16] bitops: Add ONES macro Alistair Francis
2016-01-30 1:01 ` [Qemu-devel] [PATCH v3 09/16] dma: Add Xilinx Zynq devcfg device model Alistair Francis
2016-02-09 17:08 ` Alex Bennée
2016-02-09 21:47 ` Alistair Francis
2016-01-30 1:01 ` [Qemu-devel] [PATCH v3 10/16] xilinx_zynq: add devcfg to machine model Alistair Francis
2016-01-30 1:01 ` [Qemu-devel] [PATCH v3 11/16] qdev: Define qdev_get_gpio_out Alistair Francis
2016-01-30 1:01 ` [Qemu-devel] [PATCH v3 12/16] qdev: Add qdev_pass_all_gpios API Alistair Francis
2016-01-30 1:01 ` [Qemu-devel] [PATCH v3 13/16] irq: Add opaque setter routine Alistair Francis
2016-01-30 1:01 ` [Qemu-devel] [PATCH v3 14/16] register: Add GPIO API Alistair Francis
2016-01-30 1:01 ` [Qemu-devel] [PATCH v3 15/16] misc: Introduce ZynqMP IOU SLCR Alistair Francis
2016-02-09 17:22 ` [Qemu-devel] [PATCH v3 00/16] data-driven device registers Alex Bennée
2016-02-09 21:56 ` Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87fux2w1c6.fsf@linaro.org \
--to=alex.bennee@linaro.org \
--cc=afaerber@suse.de \
--cc=alistair.francis@xilinx.com \
--cc=crosthwaitepeter@gmail.com \
--cc=edgar.iglesias@gmail.com \
--cc=edgar.iglesias@xilinx.com \
--cc=fred.konrad@greensocs.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).