qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Juan Quintela <quintela@redhat.com>
To: "Denis V. Lunev" <den@openvz.org>
Cc: qemu-devel@nongnu.org, Stefan Hajnoczi <stefanha@redhat.com>
Subject: Re: [Qemu-devel] [PATCH RFC 1/2] snapshot: create helper to test that block drivers supports snapshots
Date: Wed, 04 Nov 2015 13:07:44 +0100	[thread overview]
Message-ID: <87io5ic6i7.fsf@emacs.mitica> (raw)
In-Reply-To: <1446636716-9721-1-git-send-email-den@openvz.org> (Denis V. Lunev's message of "Wed, 4 Nov 2015 14:31:55 +0300")

"Denis V. Lunev" <den@openvz.org> wrote:
> The patch enforces proper locking for this operation.
>
> Signed-off-by: Denis V. Lunev <den@openvz.org>
> CC: Stefan Hajnoczi <stefanha@redhat.com>
> CC: Juan Quintela <quintela@redhat.com>
> ---
> Patches are compile-tested only. Sent to check the approach, naming and
> functions placement. Functions are returning bad BlockDriver via
> parameter to make clear distinction when I'll have to return BS to write.
>
>  block/snapshot.c         | 35 +++++++++++++++++++++++++++++++++++
>  include/block/snapshot.h |  9 +++++++++
>  migration/savevm.c       | 17 ++++-------------
>  3 files changed, 48 insertions(+), 13 deletions(-)
>
> diff --git a/block/snapshot.c b/block/snapshot.c
> index 89500f2..6b5ce4e 100644
> --- a/block/snapshot.c
> +++ b/block/snapshot.c
> @@ -25,6 +25,7 @@
>  #include "block/snapshot.h"
>  #include "block/block_int.h"
>  #include "qapi/qmp/qerror.h"
> +#include "monitor/monitor.h"

You don't need the monitor here O:-)

>  
>  QemuOptsList internal_snapshot_opts = {
>      .name = "snapshot",
> @@ -356,3 +357,37 @@ int bdrv_snapshot_load_tmp_by_id_or_name(BlockDriverState *bs,
>  
>      return ret;
>  }
> +
> +
> +/* Group operations. All block drivers are involved.
> + * These functions will properly handle dataplace (take aio_context_acquire
> + * when appropriate for appropriate block drivers
> + *
> + * Returned block driver will be always locked.
> + */
> +
> +bool bdrv_snapshot_all_can_snapshot(BlockDriverState **first_bad_bs)

bdrv_snapshot_is_possible???

> +{
> +    BlockDriverState *bs;
> +
> +    while ((bs = bdrv_next(bs))) {
> +        bool ok;
> +        AioContext *ctx = bdrv_get_aio_context(bs);
> +
> +        if (!bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
> +            continue;
> +        }
> +
> +        aio_context_acquire(ctx);

I think that you should get the lock before the bdrv_is_inserted, but
who am I to know for sure O:-)

> +        ok = bdrv_can_snapshot(bs);
> +        aio_context_release(ctx);
> +
> +        if (!ok) {
> +            *first_bad_bs = bs;
> +            return false;
> +        }
> +    }
> +
> +    *first_bad_bs = NULL;
> +    return true;
> +}
> diff --git a/include/block/snapshot.h b/include/block/snapshot.h
> index 770d9bb..61b4b5d 100644
> --- a/include/block/snapshot.h
> +++ b/include/block/snapshot.h
> @@ -75,4 +75,13 @@ int bdrv_snapshot_load_tmp(BlockDriverState *bs,
>  int bdrv_snapshot_load_tmp_by_id_or_name(BlockDriverState *bs,
>                                           const char *id_or_name,
>                                           Error **errp);
> +
> +
> +/* Group operations. All block drivers are involved.
> + * These functions will properly handle dataplace (take aio_context_acquire
> + * when appropriate for appropriate block drivers
> + *
> + */
> +bool bdrv_snapshot_all_can_snapshot(BlockDriverState **first_bad_bs);
> +
>  #endif
> diff --git a/migration/savevm.c b/migration/savevm.c
> index dbcc39a..91ba0bf 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -1290,19 +1290,10 @@ void hmp_savevm(Monitor *mon, const QDict *qdict)
>      const char *name = qdict_get_try_str(qdict, "name");
>      Error *local_err = NULL;
>  
> -    /* Verify if there is a device that doesn't support snapshots and is writable */
> -    bs = NULL;
> -    while ((bs = bdrv_next(bs))) {
> -
> -        if (!bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
> -            continue;
> -        }
> -
> -        if (!bdrv_can_snapshot(bs)) {
> -            monitor_printf(mon, "Device '%s' is writable but does not support snapshots.\n",
> -                               bdrv_get_device_name(bs));
> -            return;
> -        }
> +    if (bdrv_snapshot_all_can_snapshot(&bs)) {
> +        monitor_printf(mon, "Device '%s' is writable but does not "
> +                       "support snapshots.\n", bdrv_get_device_name(bs));
> +        return;
>      }
>  
>      bs = find_vmstate_bs();

ok with the savevm.c changes.

  parent reply	other threads:[~2015-11-04 12:07 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-03 14:12 [Qemu-devel] [PATCH QEMU 2.5 v4 0/10] dataplane snapshot fixes + aio_poll fixes Denis V. Lunev
2015-11-03 14:12 ` [Qemu-devel] [PATCH 01/10] migration: add missed aio_context_acquire for state writing/reading Denis V. Lunev
2015-11-03 14:12 ` [Qemu-devel] [PATCH 02/10] block: add missed aio_context_acquire around bdrv_set_aio_context Denis V. Lunev
2015-11-03 14:12 ` [Qemu-devel] [PATCH 03/10] migration: added missed aio_context_acquire around bdrv_snapshot_delete Denis V. Lunev
2015-11-03 14:51   ` Juan Quintela
2015-11-04  7:32     ` [Qemu-devel] [RFC PATCH 1/1] dataplane: alternative approach to locking Denis V. Lunev
2015-11-04  9:49       ` Juan Quintela
2015-11-04 11:12         ` Denis V. Lunev
2015-11-04 12:03           ` Juan Quintela
2015-11-04 12:07             ` Denis V. Lunev
2015-11-04 11:31         ` [Qemu-devel] [PATCH RFC 1/2] snapshot: create helper to test that block drivers supports snapshots Denis V. Lunev
2015-11-04 11:31           ` [Qemu-devel] [PATCH RFC 2/2] snapshot: create bdrv_snapshot_all_del_snapshot helper Denis V. Lunev
2015-11-04 12:10             ` Juan Quintela
2015-11-04 12:07           ` Juan Quintela [this message]
2015-11-04 13:50             ` [Qemu-devel] [PATCH RFC 1/2] snapshot: create helper to test that block drivers supports snapshots Stefan Hajnoczi
2015-11-04 13:52           ` Stefan Hajnoczi
2015-11-03 14:12 ` [Qemu-devel] [PATCH 04/10] blockdev: acquire AioContext in hmp_commit() Denis V. Lunev
2015-11-03 14:38   ` Denis V. Lunev
2015-11-03 14:12 ` [Qemu-devel] [PATCH 05/10] block: guard bdrv_drain in bdrv_close with aio_context_acquire Denis V. Lunev
2015-11-03 14:12 ` [Qemu-devel] [PATCH 06/10] io: guard aio_poll " Denis V. Lunev
2015-11-03 14:12 ` [Qemu-devel] [PATCH 07/10] block: call aio_context_acquire in qemu_img/nbd/io Denis V. Lunev
2015-11-03 14:12 ` [Qemu-devel] [PATCH 08/10] fifolock: create rfifolock_is_owner helper Denis V. Lunev
2015-11-03 14:12 ` [Qemu-devel] [PATCH 09/10] aio_context: create aio_context_is_owner helper Denis V. Lunev
2015-11-03 14:12 ` [Qemu-devel] [PATCH 10/10] aio: change aio_poll constraints Denis V. Lunev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87io5ic6i7.fsf@emacs.mitica \
    --to=quintela@redhat.com \
    --cc=den@openvz.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).