* [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically @ 2022-09-21 6:00 chenh 2022-09-21 17:56 ` Raphael Norwitz 2022-09-21 18:23 ` Alex Bennée 0 siblings, 2 replies; 15+ messages in thread From: chenh @ 2022-09-21 6:00 UTC (permalink / raw) To: raphael.norwitz, mst Cc: jasowang, kwolf, hreitz, qemu-block, qemu-devel, houyl, zy, lulu, Hao Chen From: Hao Chen <chenh@yusur.tech> When use dpdk-vdpa tests vdpa device. You need to specify the mac address to start the virtual machine through libvirt or qemu, but now, the libvirt or qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config to get the mac address of the vdpa hardware without manual configuration. v1->v2: Only copy ETH_ALEN data of netcfg for some vdpa device such as NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. We only need the mac address and don't care about the status field. Signed-off-by: Hao Chen <chenh@yusur.tech> --- hw/block/vhost-user-blk.c | 1 - hw/net/virtio-net.c | 7 +++++++ hw/virtio/vhost-user.c | 19 ------------------- 3 files changed, 7 insertions(+), 20 deletions(-) diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c index 9117222456..5dca4eab09 100644 --- a/hw/block/vhost-user-blk.c +++ b/hw/block/vhost-user-blk.c @@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) vhost_dev_set_config_notifier(&s->dev, &blk_ops); - s->vhost_user.supports_config = true; ret = vhost_dev_init(&s->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, errp); if (ret < 0) { diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c index dd0d056fde..90405083b1 100644 --- a/hw/net/virtio-net.c +++ b/hw/net/virtio-net.c @@ -166,6 +166,13 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config) } memcpy(config, &netcfg, n->config_size); } + } else if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) { + ret = vhost_net_get_config(get_vhost_net(nc->peer), (uint8_t *)&netcfg, + n->config_size); + if (ret != -1) { + /* Automatically obtain the mac address of the vdpa device + * when using the dpdk vdpa */ + memcpy(config, &netcfg, ETH_ALEN); } } diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c index bd24741be8..8b01078249 100644 --- a/hw/virtio/vhost-user.c +++ b/hw/virtio/vhost-user.c @@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, } if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { - bool supports_f_config = vus->supports_config || - (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); uint64_t protocol_features; dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; @@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, */ protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; - if (supports_f_config) { - if (!virtio_has_feature(protocol_features, - VHOST_USER_PROTOCOL_F_CONFIG)) { - error_setg(errp, "vhost-user device expecting " - "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " - "not support it."); - return -EPROTO; - } - } else { - if (virtio_has_feature(protocol_features, - VHOST_USER_PROTOCOL_F_CONFIG)) { - warn_reportf_err(*errp, "vhost-user backend supports " - "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); - protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); - } - } - /* final set of protocol features */ dev->protocol_features = protocol_features; err = vhost_user_set_protocol_features(dev, dev->protocol_features); -- 2.27.0 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-21 6:00 [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically chenh @ 2022-09-21 17:56 ` Raphael Norwitz 2022-09-22 1:34 ` Jason Wang 2022-09-21 18:23 ` Alex Bennée 1 sibling, 1 reply; 15+ messages in thread From: Raphael Norwitz @ 2022-09-21 17:56 UTC (permalink / raw) To: chenh, mst@redhat.com Cc: jasowang@redhat.com, kwolf@redhat.com, hreitz@redhat.com, qemu-block@nongnu.org, qemu-devel@nongnu.org, houyl@yusur.tech, zy@yusur.tech, lulu@redhat.com, Hao Chen [-- Attachment #1: Type: text/plain, Size: 4631 bytes --] If I read your response on the other thread correctly, this change is intended to prioritize the MAC address exposed by DPDK over the one provided by the QEMU command line? Sounds reasonable in principle, but I would get confirmation from vDPA/vhost-net maintainers. That said the way you’re hacking the vhost-user code breaks a valuable check for bad vhost-user-blk backends. I would suggest finding another implementation which does not regress functionality for other device types. >From: Hao Chen <chenh@yusur.tech> > >When use dpdk-vdpa tests vdpa device. You need to specify the mac address to >start the virtual machine through libvirt or qemu, but now, the libvirt or >qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config >to get the mac address of the vdpa hardware without manual configuration. > >v1->v2: >Only copy ETH_ALEN data of netcfg for some vdpa device such as >NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. >We only need the mac address and don't care about the status field. > >Signed-off-by: Hao Chen <chenh@yusur.tech> >--- > hw/block/vhost-user-blk.c | 1 - > hw/net/virtio-net.c | 7 +++++++ > hw/virtio/vhost-user.c | 19 ------------------- > 3 files changed, 7 insertions(+), 20 deletions(-) > >diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c >index 9117222456..5dca4eab09 100644 >--- a/hw/block/vhost-user-blk.c >+++ b/hw/block/vhost-user-blk.c >@@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) > > vhost_dev_set_config_notifier(&s->dev, &blk_ops); > >- s->vhost_user.supports_config = true; > ret = vhost_dev_init(&s->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, > errp); > if (ret < 0) { >diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c >index dd0d056fde..90405083b1 100644 >--- a/hw/net/virtio-net.c >+++ b/hw/net/virtio-net.c >@@ -166,6 +166,13 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config) > } > memcpy(config, &netcfg, n->config_size); > } >+ } else if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) { >+ ret = vhost_net_get_config(get_vhost_net(nc->peer), (uint8_t *)&netcfg, >+ n->config_size); >+ if (ret != -1) { >+ /* Automatically obtain the mac address of the vdpa device >+ * when using the dpdk vdpa */ >+ memcpy(config, &netcfg, ETH_ALEN); > } > } > >diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c >index bd24741be8..8b01078249 100644 >--- a/hw/virtio/vhost-user.c >+++ b/hw/virtio/vhost-user.c >@@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > } > > if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { >- bool supports_f_config = vus->supports_config || >- (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); > uint64_t protocol_features; > > dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; >@@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > */ > protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; > >- if (supports_f_config) { >- if (!virtio_has_feature(protocol_features, >- VHOST_USER_PROTOCOL_F_CONFIG)) { >- error_setg(errp, "vhost-user device expecting " >- "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " >- "not support it."); >- return -EPROTO; >- } >- } else { >- if (virtio_has_feature(protocol_features, >- VHOST_USER_PROTOCOL_F_CONFIG)) { >- warn_reportf_err(*errp, "vhost-user backend supports " >- "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); >- protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); >- } >- } >- > /* final set of protocol features */ > dev->protocol_features = protocol_features; > err = vhost_user_set_protocol_features(dev, dev->protocol_features); >-- >2.27.0 > [-- Attachment #2: Type: text/html, Size: 16735 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-21 17:56 ` Raphael Norwitz @ 2022-09-22 1:34 ` Jason Wang 2022-09-22 9:56 ` Michael S. Tsirkin 2022-09-23 3:53 ` houyl 0 siblings, 2 replies; 15+ messages in thread From: Jason Wang @ 2022-09-22 1:34 UTC (permalink / raw) To: Raphael Norwitz Cc: mst@redhat.com, kwolf@redhat.com, hreitz@redhat.com, qemu-block@nongnu.org, qemu-devel@nongnu.org, houyl@yusur.tech, zy@yusur.tech, lulu@redhat.com, Hao Chen On Thu, Sep 22, 2022 at 1:58 AM Raphael Norwitz <raphael.norwitz@nutanix.com> wrote: > > If I read your response on the other thread correctly, this change is intended > > to prioritize the MAC address exposed by DPDK over the one provided by the > > QEMU command line? Sounds reasonable in principle, but I would get confirmation > > from vDPA/vhost-net maintainers. I think the best way is to (and it seems easier) 1) have the management layer to make sure the mac came from cli matches the underlayer vDPA 2) having a sanity check and fail the device initialization if they don't match Thanks > > > > That said the way you’re hacking the vhost-user code breaks a valuable check for > > bad vhost-user-blk backends. I would suggest finding another implementation which > > does not regress functionality for other device types. > > > > > > >From: Hao Chen <chenh@yusur.tech> > > > > > >When use dpdk-vdpa tests vdpa device. You need to specify the mac address to > > >start the virtual machine through libvirt or qemu, but now, the libvirt or > > >qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config > > >to get the mac address of the vdpa hardware without manual configuration. > > > > > >v1->v2: > > >Only copy ETH_ALEN data of netcfg for some vdpa device such as > > >NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. > > >We only need the mac address and don't care about the status field. > > > > > >Signed-off-by: Hao Chen <chenh@yusur.tech> > > >--- > > > hw/block/vhost-user-blk.c | 1 - > > > hw/net/virtio-net.c | 7 +++++++ > > > hw/virtio/vhost-user.c | 19 ------------------- > > > 3 files changed, 7 insertions(+), 20 deletions(-) > > > > > >diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c > > >index 9117222456..5dca4eab09 100644 > > >--- a/hw/block/vhost-user-blk.c > > >+++ b/hw/block/vhost-user-blk.c > > >@@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) > > > > > > vhost_dev_set_config_notifier(&s->dev, &blk_ops); > > > > > >- s->vhost_user.supports_config = true; > > > ret = vhost_dev_init(&s->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, > > > errp); > > > if (ret < 0) { > > >diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c > > >index dd0d056fde..90405083b1 100644 > > >--- a/hw/net/virtio-net.c > > >+++ b/hw/net/virtio-net.c > > >@@ -166,6 +166,13 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config) > > > } > > > memcpy(config, &netcfg, n->config_size); > > > } > > >+ } else if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) { > > >+ ret = vhost_net_get_config(get_vhost_net(nc->peer), (uint8_t *)&netcfg, > > >+ n->config_size); > > >+ if (ret != -1) { > > >+ /* Automatically obtain the mac address of the vdpa device > > >+ * when using the dpdk vdpa */ > > >+ memcpy(config, &netcfg, ETH_ALEN); > > > } > > > } > > > > > >diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c > > >index bd24741be8..8b01078249 100644 > > >--- a/hw/virtio/vhost-user.c > > >+++ b/hw/virtio/vhost-user.c > > >@@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > > > } > > > > > > if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { > > >- bool supports_f_config = vus->supports_config || > > >- (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); > > > uint64_t protocol_features; > > > > > > dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; > > >@@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > > > */ > > > protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; > > > > > >- if (supports_f_config) { > > >- if (!virtio_has_feature(protocol_features, > > >- VHOST_USER_PROTOCOL_F_CONFIG)) { > > >- error_setg(errp, "vhost-user device expecting " > > >- "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " > > >- "not support it."); > > >- return -EPROTO; > > >- } > > >- } else { > > >- if (virtio_has_feature(protocol_features, > > >- VHOST_USER_PROTOCOL_F_CONFIG)) { > > >- warn_reportf_err(*errp, "vhost-user backend supports " > > >- "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); > > >- protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); > > >- } > > >- } > > >- > > > /* final set of protocol features */ > > > dev->protocol_features = protocol_features; > > > err = vhost_user_set_protocol_features(dev, dev->protocol_features); > > >-- > > >2.27.0 > > > > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-22 1:34 ` Jason Wang @ 2022-09-22 9:56 ` Michael S. Tsirkin 2022-09-23 3:21 ` 陈浩 2022-09-23 3:53 ` houyl 1 sibling, 1 reply; 15+ messages in thread From: Michael S. Tsirkin @ 2022-09-22 9:56 UTC (permalink / raw) To: Jason Wang Cc: Raphael Norwitz, kwolf@redhat.com, hreitz@redhat.com, qemu-block@nongnu.org, qemu-devel@nongnu.org, houyl@yusur.tech, zy@yusur.tech, lulu@redhat.com, Hao Chen On Thu, Sep 22, 2022 at 09:34:41AM +0800, Jason Wang wrote: > On Thu, Sep 22, 2022 at 1:58 AM Raphael Norwitz > <raphael.norwitz@nutanix.com> wrote: > > > > If I read your response on the other thread correctly, this change is intended > > > > to prioritize the MAC address exposed by DPDK over the one provided by the > > > > QEMU command line? Sounds reasonable in principle, but I would get confirmation > > > > from vDPA/vhost-net maintainers. > > I think the best way is to (and it seems easier) > > 1) have the management layer to make sure the mac came from cli > matches the underlayer vDPA > 2) having a sanity check and fail the device initialization if they don't match > > Thanks I think I agree, we should not overwrite user supplied arguments. I think the case where we might want to get the mac from VDPA and use it is when it's been assigned randomly as opposed to coming from cli. > > > > > > > > That said the way you’re hacking the vhost-user code breaks a valuable check for > > > > bad vhost-user-blk backends. I would suggest finding another implementation which > > > > does not regress functionality for other device types. > > > > > > > > > > > > >From: Hao Chen <chenh@yusur.tech> > > > > > > > > > >When use dpdk-vdpa tests vdpa device. You need to specify the mac address to > > > > >start the virtual machine through libvirt or qemu, but now, the libvirt or > > > > >qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config > > > > >to get the mac address of the vdpa hardware without manual configuration. > > > > > > > > > >v1->v2: > > > > >Only copy ETH_ALEN data of netcfg for some vdpa device such as > > > > >NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. > > > > >We only need the mac address and don't care about the status field. > > > > > > > > > >Signed-off-by: Hao Chen <chenh@yusur.tech> > > > > >--- > > > > > hw/block/vhost-user-blk.c | 1 - > > > > > hw/net/virtio-net.c | 7 +++++++ > > > > > hw/virtio/vhost-user.c | 19 ------------------- > > > > > 3 files changed, 7 insertions(+), 20 deletions(-) > > > > > > > > > >diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c > > > > >index 9117222456..5dca4eab09 100644 > > > > >--- a/hw/block/vhost-user-blk.c > > > > >+++ b/hw/block/vhost-user-blk.c > > > > >@@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) > > > > > > > > > > vhost_dev_set_config_notifier(&s->dev, &blk_ops); > > > > > > > > > >- s->vhost_user.supports_config = true; > > > > > ret = vhost_dev_init(&s->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, > > > > > errp); > > > > > if (ret < 0) { > > > > >diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c > > > > >index dd0d056fde..90405083b1 100644 > > > > >--- a/hw/net/virtio-net.c > > > > >+++ b/hw/net/virtio-net.c > > > > >@@ -166,6 +166,13 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config) > > > > > } > > > > > memcpy(config, &netcfg, n->config_size); > > > > > } > > > > >+ } else if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) { > > > > >+ ret = vhost_net_get_config(get_vhost_net(nc->peer), (uint8_t *)&netcfg, > > > > >+ n->config_size); > > > > >+ if (ret != -1) { > > > > >+ /* Automatically obtain the mac address of the vdpa device > > > > >+ * when using the dpdk vdpa */ > > > > >+ memcpy(config, &netcfg, ETH_ALEN); > > > > > } > > > > > } > > > > > > > > > >diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c > > > > >index bd24741be8..8b01078249 100644 > > > > >--- a/hw/virtio/vhost-user.c > > > > >+++ b/hw/virtio/vhost-user.c > > > > >@@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > > > > > } > > > > > > > > > > if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { > > > > >- bool supports_f_config = vus->supports_config || > > > > >- (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); > > > > > uint64_t protocol_features; > > > > > > > > > > dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; > > > > >@@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > > > > > */ > > > > > protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; > > > > > > > > > >- if (supports_f_config) { > > > > >- if (!virtio_has_feature(protocol_features, > > > > >- VHOST_USER_PROTOCOL_F_CONFIG)) { > > > > >- error_setg(errp, "vhost-user device expecting " > > > > >- "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " > > > > >- "not support it."); > > > > >- return -EPROTO; > > > > >- } > > > > >- } else { > > > > >- if (virtio_has_feature(protocol_features, > > > > >- VHOST_USER_PROTOCOL_F_CONFIG)) { > > > > >- warn_reportf_err(*errp, "vhost-user backend supports " > > > > >- "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); > > > > >- protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); > > > > >- } > > > > >- } > > > > >- > > > > > /* final set of protocol features */ > > > > > dev->protocol_features = protocol_features; > > > > > err = vhost_user_set_protocol_features(dev, dev->protocol_features); > > > > >-- > > > > >2.27.0 > > > > > > > > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-22 9:56 ` Michael S. Tsirkin @ 2022-09-23 3:21 ` 陈浩 2022-09-23 3:36 ` Jason Wang 0 siblings, 1 reply; 15+ messages in thread From: 陈浩 @ 2022-09-23 3:21 UTC (permalink / raw) To: Michael S. Tsirkin, Jason Wang Cc: Raphael Norwitz, kwolf@redhat.com, hreitz@redhat.com, qemu-block@nongnu.org, qemu-devel@nongnu.org, houyl@yusur.tech, zy@yusur.tech, lulu@redhat.com On 2022/9/22 17:56, Michael S. Tsirkin wrote: > On Thu, Sep 22, 2022 at 09:34:41AM +0800, Jason Wang wrote: >> On Thu, Sep 22, 2022 at 1:58 AM Raphael Norwitz >> <raphael.norwitz@nutanix.com> wrote: >>> If I read your response on the other thread correctly, this change is intended >>> >>> to prioritize the MAC address exposed by DPDK over the one provided by the >>> >>> QEMU command line? Sounds reasonable in principle, but I would get confirmation >>> >>> from vDPA/vhost-net maintainers. >> I think the best way is to (and it seems easier) >> >> 1) have the management layer to make sure the mac came from cli >> matches the underlayer vDPA >> 2) having a sanity check and fail the device initialization if they don't match >> >> Thanks > I think I agree, we should not overwrite user supplied arguments. > I think the case where we might want to get the mac from VDPA > and use it is when it's been assigned randomly as opposed to coming from cli. Yes, when the cli passes in a random mac address that is inconsistent with the vdpa device, qemu still starts the virtual machine as usual, but in this case, the qemu and vdpa environments do not work correctly. So I want to get mac address directly from vdpa device instead of cli. Having a sanity check and fail the device initialization if they don't match is a good idea, but it seems more convenient to directly overwrite the cli mac address. > > >>> >>> >>> That said the way you’re hacking the vhost-user code breaks a valuable check for >>> >>> bad vhost-user-blk backends. I would suggest finding another implementation which >>> >>> does not regress functionality for other device types. >>> >>> >>> >>> >>> >>>> From: Hao Chen <chenh@yusur.tech> >>>> When use dpdk-vdpa tests vdpa device. You need to specify the mac address to >>>> start the virtual machine through libvirt or qemu, but now, the libvirt or >>>> qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config >>>> to get the mac address of the vdpa hardware without manual configuration. >>>> v1->v2: >>>> Only copy ETH_ALEN data of netcfg for some vdpa device such as >>>> NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. >>>> We only need the mac address and don't care about the status field. >>>> Signed-off-by: Hao Chen <chenh@yusur.tech> >>>> --- >>>> hw/block/vhost-user-blk.c | 1 - >>>> hw/net/virtio-net.c | 7 +++++++ >>>> hw/virtio/vhost-user.c | 19 ------------------- >>>> 3 files changed, 7 insertions(+), 20 deletions(-) >>>> diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c >>>> index 9117222456..5dca4eab09 100644 >>>> --- a/hw/block/vhost-user-blk.c >>>> +++ b/hw/block/vhost-user-blk.c >>>> @@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) >>>> vhost_dev_set_config_notifier(&s->dev, &blk_ops); >>>> - s->vhost_user.supports_config = true; >>>> ret = vhost_dev_init(&s->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, >>>> errp); >>>> if (ret < 0) { >>>> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c >>>> index dd0d056fde..90405083b1 100644 >>>> --- a/hw/net/virtio-net.c >>>> +++ b/hw/net/virtio-net.c >>>> @@ -166,6 +166,13 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config) >>>> } >>>> memcpy(config, &netcfg, n->config_size); >>>> } >>>> + } else if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) { >>>> + ret = vhost_net_get_config(get_vhost_net(nc->peer), (uint8_t *)&netcfg, >>>> + n->config_size); >>>> + if (ret != -1) { >>>> + /* Automatically obtain the mac address of the vdpa device >>>> + * when using the dpdk vdpa */ >>>> + memcpy(config, &netcfg, ETH_ALEN); >>>> } >>>> } >>>> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c >>>> index bd24741be8..8b01078249 100644 >>>> --- a/hw/virtio/vhost-user.c >>>> +++ b/hw/virtio/vhost-user.c >>>> @@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, >>>> } >>>> if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { >>>> - bool supports_f_config = vus->supports_config || >>>> - (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); >>>> uint64_t protocol_features; >>>> dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; >>>> @@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, >>>> */ >>>> protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; >>>> - if (supports_f_config) { >>>> - if (!virtio_has_feature(protocol_features, >>>> - VHOST_USER_PROTOCOL_F_CONFIG)) { >>>> - error_setg(errp, "vhost-user device expecting " >>>> - "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " >>>> - "not support it."); >>>> - return -EPROTO; >>>> - } >>>> - } else { >>>> - if (virtio_has_feature(protocol_features, >>>> - VHOST_USER_PROTOCOL_F_CONFIG)) { >>>> - warn_reportf_err(*errp, "vhost-user backend supports " >>>> - "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); >>>> - protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); >>>> - } >>>> - } >>>> - >>>> /* final set of protocol features */ >>>> dev->protocol_features = protocol_features; >>>> err = vhost_user_set_protocol_features(dev, dev->protocol_features); >>>> -- >>>> 2.27.0 >>> > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-23 3:21 ` 陈浩 @ 2022-09-23 3:36 ` Jason Wang 0 siblings, 0 replies; 15+ messages in thread From: Jason Wang @ 2022-09-23 3:36 UTC (permalink / raw) To: 陈浩 Cc: Michael S. Tsirkin, Raphael Norwitz, kwolf@redhat.com, hreitz@redhat.com, qemu-block@nongnu.org, qemu-devel@nongnu.org, houyl@yusur.tech, zy@yusur.tech, lulu@redhat.com On Fri, Sep 23, 2022 at 11:33 AM 陈浩 <chenh@yusur.tech> wrote: > > > On 2022/9/22 17:56, Michael S. Tsirkin wrote: > > On Thu, Sep 22, 2022 at 09:34:41AM +0800, Jason Wang wrote: > >> On Thu, Sep 22, 2022 at 1:58 AM Raphael Norwitz > >> <raphael.norwitz@nutanix.com> wrote: > >>> If I read your response on the other thread correctly, this change is intended > >>> > >>> to prioritize the MAC address exposed by DPDK over the one provided by the > >>> > >>> QEMU command line? Sounds reasonable in principle, but I would get confirmation > >>> > >>> from vDPA/vhost-net maintainers. > >> I think the best way is to (and it seems easier) > >> > >> 1) have the management layer to make sure the mac came from cli > >> matches the underlayer vDPA > >> 2) having a sanity check and fail the device initialization if they don't match > >> > >> Thanks > > I think I agree, we should not overwrite user supplied arguments. > > I think the case where we might want to get the mac from VDPA > > and use it is when it's been assigned randomly as opposed to coming from cli. > Yes, when the cli passes in a random mac address that is inconsistent > with the vdpa device, qemu still starts the virtual machine as usual, > but in this case, the qemu and vdpa environments do not work correctly. > So I want to get mac address directly from vdpa device instead of cli. Let's teach the management to do that. It has a lot of advantages, more below. Not sure for the DPDK case, but kernel vDPA allows the mgmt to provision the vDPA with a mac address which could be used in this case. > > Having a sanity check and fail the device initialization if they don't > match is a good idea, but it seems more convenient to directly overwrite > the cli mac address. This will confuse the management where it may do a lot of mac related setups. Thanks > > > > > >>> > >>> > >>> That said the way you’re hacking the vhost-user code breaks a valuable check for > >>> > >>> bad vhost-user-blk backends. I would suggest finding another implementation which > >>> > >>> does not regress functionality for other device types. > >>> > >>> > >>> > >>> > >>> > >>>> From: Hao Chen <chenh@yusur.tech> > >>>> When use dpdk-vdpa tests vdpa device. You need to specify the mac address to > >>>> start the virtual machine through libvirt or qemu, but now, the libvirt or > >>>> qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config > >>>> to get the mac address of the vdpa hardware without manual configuration. > >>>> v1->v2: > >>>> Only copy ETH_ALEN data of netcfg for some vdpa device such as > >>>> NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. > >>>> We only need the mac address and don't care about the status field. > >>>> Signed-off-by: Hao Chen <chenh@yusur.tech> > >>>> --- > >>>> hw/block/vhost-user-blk.c | 1 - > >>>> hw/net/virtio-net.c | 7 +++++++ > >>>> hw/virtio/vhost-user.c | 19 ------------------- > >>>> 3 files changed, 7 insertions(+), 20 deletions(-) > >>>> diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c > >>>> index 9117222456..5dca4eab09 100644 > >>>> --- a/hw/block/vhost-user-blk.c > >>>> +++ b/hw/block/vhost-user-blk.c > >>>> @@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) > >>>> vhost_dev_set_config_notifier(&s->dev, &blk_ops); > >>>> - s->vhost_user.supports_config = true; > >>>> ret = vhost_dev_init(&s->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, > >>>> errp); > >>>> if (ret < 0) { > >>>> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c > >>>> index dd0d056fde..90405083b1 100644 > >>>> --- a/hw/net/virtio-net.c > >>>> +++ b/hw/net/virtio-net.c > >>>> @@ -166,6 +166,13 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config) > >>>> } > >>>> memcpy(config, &netcfg, n->config_size); > >>>> } > >>>> + } else if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) { > >>>> + ret = vhost_net_get_config(get_vhost_net(nc->peer), (uint8_t *)&netcfg, > >>>> + n->config_size); > >>>> + if (ret != -1) { > >>>> + /* Automatically obtain the mac address of the vdpa device > >>>> + * when using the dpdk vdpa */ > >>>> + memcpy(config, &netcfg, ETH_ALEN); > >>>> } > >>>> } > >>>> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c > >>>> index bd24741be8..8b01078249 100644 > >>>> --- a/hw/virtio/vhost-user.c > >>>> +++ b/hw/virtio/vhost-user.c > >>>> @@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > >>>> } > >>>> if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { > >>>> - bool supports_f_config = vus->supports_config || > >>>> - (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); > >>>> uint64_t protocol_features; > >>>> dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; > >>>> @@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > >>>> */ > >>>> protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; > >>>> - if (supports_f_config) { > >>>> - if (!virtio_has_feature(protocol_features, > >>>> - VHOST_USER_PROTOCOL_F_CONFIG)) { > >>>> - error_setg(errp, "vhost-user device expecting " > >>>> - "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " > >>>> - "not support it."); > >>>> - return -EPROTO; > >>>> - } > >>>> - } else { > >>>> - if (virtio_has_feature(protocol_features, > >>>> - VHOST_USER_PROTOCOL_F_CONFIG)) { > >>>> - warn_reportf_err(*errp, "vhost-user backend supports " > >>>> - "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); > >>>> - protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); > >>>> - } > >>>> - } > >>>> - > >>>> /* final set of protocol features */ > >>>> dev->protocol_features = protocol_features; > >>>> err = vhost_user_set_protocol_features(dev, dev->protocol_features); > >>>> -- > >>>> 2.27.0 > >>> > > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-22 1:34 ` Jason Wang 2022-09-22 9:56 ` Michael S. Tsirkin @ 2022-09-23 3:53 ` houyl 2022-09-23 4:05 ` Jason Wang 2022-09-23 6:20 ` Michael S. Tsirkin 1 sibling, 2 replies; 15+ messages in thread From: houyl @ 2022-09-23 3:53 UTC (permalink / raw) To: jasowang, raphael.norwitz Cc: mst, kwolf, hreitz, qemu-block, qemu-devel, zy, lulu@redhat.com, 陈浩 [-- Attachment #1: Type: text/plain, Size: 5867 bytes --] On Thu, 22 Sep 2022 09:34:41 +0800 Jason Wang<jasowang@redhat.com> wrote: >On Thu, Sep 22, 2022 at 1:58 AM Raphael Norwitz ><raphael.norwitz@nutanix.com> wrote: >> >> If I read your response on the other thread correctly, this change is intended >> >> to prioritize the MAC address exposed by DPDK over the one provided by the >> >> QEMU command line? Sounds reasonable in principle, but I would get confirmation >> >> from vDPA/vhost-net maintainers. >I think the best way is to (and it seems easier) >1) have the management layer to make sure the mac came from cli >matches the underlayer vDPA Agreed, that's no problem. >2) having a sanity check and fail the device initialization if they don't match However, one MAC address for integrity check is from the cli, and the other MAC address is from the vDPA device, How to get it? The current situation is if MAC came from cli don't match the underlayer vDPA, the virtual machine can still start without any hints. Thanks >Thanks >> >> >> >> That said the way you’re hacking the vhost-user code breaks a valuable check for >> >> bad vhost-user-blk backends. I would suggest finding another implementation which >> >> does not regress functionality for other device types. >> >> >> >> >> >> >From: Hao Chen <chenh@yusur.tech> >> >> > >> >> >When use dpdk-vdpa tests vdpa device. You need to specify the mac address to >> >> >start the virtual machine through libvirt or qemu, but now, the libvirt or >> >> >qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config >> >> >to get the mac address of the vdpa hardware without manual configuration. >> >> > >> >> >v1->v2: >> >> >Only copy ETH_ALEN data of netcfg for some vdpa device such as >> >> >NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. >> >> >We only need the mac address and don't care about the status field. >> >> > >> >> >Signed-off-by: Hao Chen <chenh@yusur.tech> >> >> >--- >> >> > hw/block/vhost-user-blk.c | 1 - >> >> > hw/net/virtio-net.c | 7 +++++++ >> >> > hw/virtio/vhost-user.c | 19 ------------------- >> >> > 3 files changed, 7 insertions(+), 20 deletions(-) >> >> > >> >> >diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c >> >> >index 9117222456..5dca4eab09 100644 >> >> >--- a/hw/block/vhost-user-blk.c >> >> >+++ b/hw/block/vhost-user-blk.c >> >> >@@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) >> >> > >> >> > vhost_dev_set_config_notifier(&s->dev, &blk_ops); >> >> > >> >> >- s->vhost_user.supports_config = true; >> >> > ret = vhost_dev_init(&s->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, >> >> > errp); >> >> > if (ret < 0) { >> >> >diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c >> >> >index dd0d056fde..90405083b1 100644 >> >> >--- a/hw/net/virtio-net.c >> >> >+++ b/hw/net/virtio-net.c >> >> >@@ -166,6 +166,13 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config) >> >> > } >> >> > memcpy(config, &netcfg, n->config_size); >> >> > } >> >> >+ } else if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) { >> >> >+ ret = vhost_net_get_config(get_vhost_net(nc->peer), (uint8_t *)&netcfg, >> >> >+ n->config_size); >> >> >+ if (ret != -1) { >> >> >+ /* Automatically obtain the mac address of the vdpa device >> >> >+ * when using the dpdk vdpa */ >> >> >+ memcpy(config, &netcfg, ETH_ALEN); >> >> > } >> >> > } >> >> > >> >> >diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c >> >> >index bd24741be8..8b01078249 100644 >> >> >--- a/hw/virtio/vhost-user.c >> >> >+++ b/hw/virtio/vhost-user.c >> >> >@@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, >> >> > } >> >> > >> >> > if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { >> >> >- bool supports_f_config = vus->supports_config || >> >> >- (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); >> >> > uint64_t protocol_features; >> >> > >> >> > dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; >> >> >@@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, >> >> > */ >> >> > protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; >> >> > >> >> >- if (supports_f_config) { >> >> >- if (!virtio_has_feature(protocol_features, >> >> >- VHOST_USER_PROTOCOL_F_CONFIG)) { >> >> >- error_setg(errp, "vhost-user device expecting " >> >> >- "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " >> >> >- "not support it."); >> >> >- return -EPROTO; >> >> >- } >> >> >- } else { >> >> >- if (virtio_has_feature(protocol_features, >> >> >- VHOST_USER_PROTOCOL_F_CONFIG)) { >> >> >- warn_reportf_err(*errp, "vhost-user backend supports " >> >> >- "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); >> >> >- protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); >> >> >- } >> >> >- } >> >> >- >> >> > /* final set of protocol features */ >> >> > dev->protocol_features = protocol_features; >> >> > err = vhost_user_set_protocol_features(dev, dev->protocol_features); >> >> >-- >> >> >2.27.0 >> >> > >> >> [-- Attachment #2: Type: text/html, Size: 13326 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-23 3:53 ` houyl @ 2022-09-23 4:05 ` Jason Wang 2022-09-23 6:19 ` Michael S. Tsirkin 2022-09-23 6:20 ` Michael S. Tsirkin 1 sibling, 1 reply; 15+ messages in thread From: Jason Wang @ 2022-09-23 4:05 UTC (permalink / raw) To: houyl@yusur.tech Cc: raphael.norwitz, mst, kwolf, hreitz, qemu-block, qemu-devel, zy, lulu@redhat.com, 陈浩 On Fri, Sep 23, 2022 at 11:55 AM houyl@yusur.tech <houyl@yusur.tech> wrote: > > On Thu, 22 Sep 2022 09:34:41 +0800 Jason Wang<jasowang@redhat.com> wrote: > > > >On Thu, Sep 22, 2022 at 1:58 AM Raphael Norwitz > ><raphael.norwitz@nutanix.com> wrote: > >> > >> If I read your response on the other thread correctly, this change is intended > >> > >> to prioritize the MAC address exposed by DPDK over the one provided by the > >> > >> QEMU command line? Sounds reasonable in principle, but I would get confirmation > >> > >> from vDPA/vhost-net maintainers. > > >I think the best way is to (and it seems easier) > > >1) have the management layer to make sure the mac came from cli > >matches the underlayer vDPA > > Agreed, that's no problem. > > >2) having a sanity check and fail the device initialization if they don't match > > However, one MAC address for integrity check is from the cli, and the other MAC address is from the vDPA device, > How to get it? VHOST_USER_GET_CONFIG? Thanks > > The current situation is if MAC came from cli don't match the underlayer vDPA, the virtual machine can still start without any hints. > > Thanks > > > >Thanks > > >> > >> > >> > >> That said the way you’re hacking the vhost-user code breaks a valuable check for > >> > >> bad vhost-user-blk backends. I would suggest finding another implementation which > >> > >> does not regress functionality for other device types. > >> > >> > >> > >> > >> > >> >From: Hao Chen <chenh@yusur.tech> > >> > >> > > >> > >> >When use dpdk-vdpa tests vdpa device. You need to specify the mac address to > >> > >> >start the virtual machine through libvirt or qemu, but now, the libvirt or > >> > >> >qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config > >> > >> >to get the mac address of the vdpa hardware without manual configuration. > >> > >> > > >> > >> >v1->v2: > >> > >> >Only copy ETH_ALEN data of netcfg for some vdpa device such as > >> > >> >NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. > >> > >> >We only need the mac address and don't care about the status field. > >> > >> > > >> > >> >Signed-off-by: Hao Chen <chenh@yusur.tech> > >> > >> >--- > >> > >> > hw/block/vhost-user-blk.c | 1 - > >> > >> > hw/net/virtio-net.c | 7 +++++++ > >> > >> > hw/virtio/vhost-user.c | 19 ------------------- > >> > >> > 3 files changed, 7 insertions(+), 20 deletions(-) > >> > >> > > >> > >> >diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c > >> > >> >index 9117222456..5dca4eab09 100644 > >> > >> >--- a/hw/block/vhost-user-blk.c > >> > >> >+++ b/hw/block/vhost-user-blk.c > >> > >> >@@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) > >> > >> > > >> > >> > vhost_dev_set_config_notifier(&s->dev, &blk_ops); > >> > >> > > >> > >> >- s->vhost_user.supports_config = true; > >> > >> > ret = vhost_dev_init(&s->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, > >> > >> > errp); > >> > >> > if (ret < 0) { > >> > >> >diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c > >> > >> >index dd0d056fde..90405083b1 100644 > >> > >> >--- a/hw/net/virtio-net.c > >> > >> >+++ b/hw/net/virtio-net.c > >> > >> >@@ -166,6 +166,13 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config) > >> > >> > } > >> > >> > memcpy(config, &netcfg, n->config_size); > >> > >> > } > >> > >> >+ } else if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) { > >> > >> >+ ret = vhost_net_get_config(get_vhost_net(nc->peer), (uint8_t *)&netcfg, > >> > >> >+ n->config_size); > >> > >> >+ if (ret != -1) { > >> > >> >+ /* Automatically obtain the mac address of the vdpa device > >> > >> >+ * when using the dpdk vdpa */ > >> > >> >+ memcpy(config, &netcfg, ETH_ALEN); > >> > >> > } > >> > >> > } > >> > >> > > >> > >> >diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c > >> > >> >index bd24741be8..8b01078249 100644 > >> > >> >--- a/hw/virtio/vhost-user.c > >> > >> >+++ b/hw/virtio/vhost-user.c > >> > >> >@@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > >> > >> > } > >> > >> > > >> > >> > if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { > >> > >> >- bool supports_f_config = vus->supports_config || > >> > >> >- (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); > >> > >> > uint64_t protocol_features; > >> > >> > > >> > >> > dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; > >> > >> >@@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > >> > >> > */ > >> > >> > protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; > >> > >> > > >> > >> >- if (supports_f_config) { > >> > >> >- if (!virtio_has_feature(protocol_features, > >> > >> >- VHOST_USER_PROTOCOL_F_CONFIG)) { > >> > >> >- error_setg(errp, "vhost-user device expecting " > >> > >> >- "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " > >> > >> >- "not support it."); > >> > >> >- return -EPROTO; > >> > >> >- } > >> > >> >- } else { > >> > >> >- if (virtio_has_feature(protocol_features, > >> > >> >- VHOST_USER_PROTOCOL_F_CONFIG)) { > >> > >> >- warn_reportf_err(*errp, "vhost-user backend supports " > >> > >> >- "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); > >> > >> >- protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); > >> > >> >- } > >> > >> >- } > >> > >> >- > >> > >> > /* final set of protocol features */ > >> > >> > dev->protocol_features = protocol_features; > >> > >> > err = vhost_user_set_protocol_features(dev, dev->protocol_features); > >> > >> >-- > >> > >> >2.27.0 > >> > >> > > >> > >> > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-23 4:05 ` Jason Wang @ 2022-09-23 6:19 ` Michael S. Tsirkin 0 siblings, 0 replies; 15+ messages in thread From: Michael S. Tsirkin @ 2022-09-23 6:19 UTC (permalink / raw) To: Jason Wang Cc: houyl@yusur.tech, raphael.norwitz, kwolf, hreitz, qemu-block, qemu-devel, zy, lulu@redhat.com, 陈浩 On Fri, Sep 23, 2022 at 12:05:40PM +0800, Jason Wang wrote: > On Fri, Sep 23, 2022 at 11:55 AM houyl@yusur.tech <houyl@yusur.tech> wrote: > > > > On Thu, 22 Sep 2022 09:34:41 +0800 Jason Wang<jasowang@redhat.com> wrote: > > > > > > >On Thu, Sep 22, 2022 at 1:58 AM Raphael Norwitz > > ><raphael.norwitz@nutanix.com> wrote: > > >> > > >> If I read your response on the other thread correctly, this change is intended > > >> > > >> to prioritize the MAC address exposed by DPDK over the one provided by the > > >> > > >> QEMU command line? Sounds reasonable in principle, but I would get confirmation > > >> > > >> from vDPA/vhost-net maintainers. > > > > >I think the best way is to (and it seems easier) > > > > >1) have the management layer to make sure the mac came from cli > > >matches the underlayer vDPA > > > > Agreed, that's no problem. Actually, if we start failing here, won't it break working designs in which vhost user does not really have a valid mac? I am not sure we can start changing things so easily. Let's add a protocol feature? > > >2) having a sanity check and fail the device initialization if they don't match > > > > However, one MAC address for integrity check is from the cli, and the other MAC address is from the vDPA device, > > How to get it? > > VHOST_USER_GET_CONFIG? > > Thanks > > > > > The current situation is if MAC came from cli don't match the underlayer vDPA, the virtual machine can still start without any hints. > > > > Thanks > > > > > > >Thanks > > > > >> > > >> > > >> > > >> That said the way you’re hacking the vhost-user code breaks a valuable check for > > >> > > >> bad vhost-user-blk backends. I would suggest finding another implementation which > > >> > > >> does not regress functionality for other device types. > > >> > > >> > > >> > > >> > > >> > > >> >From: Hao Chen <chenh@yusur.tech> > > >> > > >> > > > >> > > >> >When use dpdk-vdpa tests vdpa device. You need to specify the mac address to > > >> > > >> >start the virtual machine through libvirt or qemu, but now, the libvirt or > > >> > > >> >qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config > > >> > > >> >to get the mac address of the vdpa hardware without manual configuration. > > >> > > >> > > > >> > > >> >v1->v2: > > >> > > >> >Only copy ETH_ALEN data of netcfg for some vdpa device such as > > >> > > >> >NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. > > >> > > >> >We only need the mac address and don't care about the status field. > > >> > > >> > > > >> > > >> >Signed-off-by: Hao Chen <chenh@yusur.tech> > > >> > > >> >--- > > >> > > >> > hw/block/vhost-user-blk.c | 1 - > > >> > > >> > hw/net/virtio-net.c | 7 +++++++ > > >> > > >> > hw/virtio/vhost-user.c | 19 ------------------- > > >> > > >> > 3 files changed, 7 insertions(+), 20 deletions(-) > > >> > > >> > > > >> > > >> >diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c > > >> > > >> >index 9117222456..5dca4eab09 100644 > > >> > > >> >--- a/hw/block/vhost-user-blk.c > > >> > > >> >+++ b/hw/block/vhost-user-blk.c > > >> > > >> >@@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) > > >> > > >> > > > >> > > >> > vhost_dev_set_config_notifier(&s->dev, &blk_ops); > > >> > > >> > > > >> > > >> >- s->vhost_user.supports_config = true; > > >> > > >> > ret = vhost_dev_init(&s->dev, &s->vhost_user, VHOST_BACKEND_TYPE_USER, 0, > > >> > > >> > errp); > > >> > > >> > if (ret < 0) { > > >> > > >> >diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c > > >> > > >> >index dd0d056fde..90405083b1 100644 > > >> > > >> >--- a/hw/net/virtio-net.c > > >> > > >> >+++ b/hw/net/virtio-net.c > > >> > > >> >@@ -166,6 +166,13 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t *config) > > >> > > >> > } > > >> > > >> > memcpy(config, &netcfg, n->config_size); > > >> > > >> > } > > >> > > >> >+ } else if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_VHOST_USER) { > > >> > > >> >+ ret = vhost_net_get_config(get_vhost_net(nc->peer), (uint8_t *)&netcfg, > > >> > > >> >+ n->config_size); > > >> > > >> >+ if (ret != -1) { > > >> > > >> >+ /* Automatically obtain the mac address of the vdpa device > > >> > > >> >+ * when using the dpdk vdpa */ > > >> > > >> >+ memcpy(config, &netcfg, ETH_ALEN); > > >> > > >> > } > > >> > > >> > } > > >> > > >> > > > >> > > >> >diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c > > >> > > >> >index bd24741be8..8b01078249 100644 > > >> > > >> >--- a/hw/virtio/vhost-user.c > > >> > > >> >+++ b/hw/virtio/vhost-user.c > > >> > > >> >@@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > > >> > > >> > } > > >> > > >> > > > >> > > >> > if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { > > >> > > >> >- bool supports_f_config = vus->supports_config || > > >> > > >> >- (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); > > >> > > >> > uint64_t protocol_features; > > >> > > >> > > > >> > > >> > dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; > > >> > > >> >@@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > > >> > > >> > */ > > >> > > >> > protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; > > >> > > >> > > > >> > > >> >- if (supports_f_config) { > > >> > > >> >- if (!virtio_has_feature(protocol_features, > > >> > > >> >- VHOST_USER_PROTOCOL_F_CONFIG)) { > > >> > > >> >- error_setg(errp, "vhost-user device expecting " > > >> > > >> >- "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " > > >> > > >> >- "not support it."); > > >> > > >> >- return -EPROTO; > > >> > > >> >- } > > >> > > >> >- } else { > > >> > > >> >- if (virtio_has_feature(protocol_features, > > >> > > >> >- VHOST_USER_PROTOCOL_F_CONFIG)) { > > >> > > >> >- warn_reportf_err(*errp, "vhost-user backend supports " > > >> > > >> >- "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); > > >> > > >> >- protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); > > >> > > >> >- } > > >> > > >> >- } > > >> > > >> >- > > >> > > >> > /* final set of protocol features */ > > >> > > >> > dev->protocol_features = protocol_features; > > >> > > >> > err = vhost_user_set_protocol_features(dev, dev->protocol_features); > > >> > > >> >-- > > >> > > >> >2.27.0 > > >> > > >> > > > >> > > >> > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-23 3:53 ` houyl 2022-09-23 4:05 ` Jason Wang @ 2022-09-23 6:20 ` Michael S. Tsirkin 1 sibling, 0 replies; 15+ messages in thread From: Michael S. Tsirkin @ 2022-09-23 6:20 UTC (permalink / raw) To: houyl@yusur.tech Cc: jasowang, raphael.norwitz, kwolf, hreitz, qemu-block, qemu-devel, zy, lulu@redhat.com, 陈浩 On Fri, Sep 23, 2022 at 11:53:22AM +0800, houyl@yusur.tech wrote: > On Thu, 22 Sep 2022 09:34:41 +0800 Jason Wang<jasowang@redhat.com> wrote: > > > >On Thu, Sep 22, 2022 at 1:58 AM Raphael Norwitz > ><raphael.norwitz@nutanix.com> wrote: > >> > >> If I read your response on the other thread correctly, this change is > intended > >> > >> to prioritize the MAC address exposed by DPDK over the one provided by > the > >> > >> QEMU command line? Sounds reasonable in principle, but I would get > confirmation > >> > >> from vDPA/vhost-net maintainers. > > >I think the best way is to (and it seems easier) > > >1) have the management layer to make sure the mac came from cli > >matches the underlayer vDPA > > Agreed, that's no problem. > > >2) having a sanity check and fail the device initialization if they don't > match > > However, one MAC address for integrity check is from the cli, and the other > MAC address is from the vDPA device, > How to get it? > > The current situation is if MAC came from cli don't match the underlayer > vDPA, the virtual machine can still start without any hints. > > Thanks > > Let me ask then, why are you supplying the incorrect MAC on the cli? -- MST ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-21 6:00 [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically chenh 2022-09-21 17:56 ` Raphael Norwitz @ 2022-09-21 18:23 ` Alex Bennée 2022-09-21 19:24 ` Michael S. Tsirkin 1 sibling, 1 reply; 15+ messages in thread From: Alex Bennée @ 2022-09-21 18:23 UTC (permalink / raw) To: chenh Cc: raphael.norwitz, mst, jasowang, kwolf, hreitz, qemu-block, houyl, zy, lulu, qemu-devel chenh <chenh@yusur.tech> writes: > From: Hao Chen <chenh@yusur.tech> > > When use dpdk-vdpa tests vdpa device. You need to specify the mac address to > start the virtual machine through libvirt or qemu, but now, the libvirt or > qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config > to get the mac address of the vdpa hardware without manual configuration. > > v1->v2: > Only copy ETH_ALEN data of netcfg for some vdpa device such as > NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. > We only need the mac address and don't care about the status field. > > Signed-off-by: Hao Chen <chenh@yusur.tech> > --- > hw/block/vhost-user-blk.c | 1 - > hw/net/virtio-net.c | 7 +++++++ > hw/virtio/vhost-user.c | 19 ------------------- > 3 files changed, 7 insertions(+), 20 deletions(-) > > diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c > index 9117222456..5dca4eab09 100644 > --- a/hw/block/vhost-user-blk.c > +++ b/hw/block/vhost-user-blk.c > @@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) > > vhost_dev_set_config_notifier(&s->dev, &blk_ops); > > - s->vhost_user.supports_config = true; <snip> NACK from me. The supports_config flag is there for a reason. > > diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c > index bd24741be8..8b01078249 100644 > --- a/hw/virtio/vhost-user.c > +++ b/hw/virtio/vhost-user.c > @@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > } > > if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { > - bool supports_f_config = vus->supports_config || > - (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); > uint64_t protocol_features; > > dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; > @@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > */ > protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; > > - if (supports_f_config) { > - if (!virtio_has_feature(protocol_features, > - VHOST_USER_PROTOCOL_F_CONFIG)) { > - error_setg(errp, "vhost-user device expecting " > - "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " > - "not support it."); > - return -EPROTO; > - } > - } else { > - if (virtio_has_feature(protocol_features, > - VHOST_USER_PROTOCOL_F_CONFIG)) { > - warn_reportf_err(*errp, "vhost-user backend supports " > - "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); > - protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); > - } > - } > - > /* final set of protocol features */ > dev->protocol_features = protocol_features; > err = vhost_user_set_protocol_features(dev, dev->protocol_features); -- Alex Bennée ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-21 18:23 ` Alex Bennée @ 2022-09-21 19:24 ` Michael S. Tsirkin 2022-09-22 10:02 ` Alex Bennée 0 siblings, 1 reply; 15+ messages in thread From: Michael S. Tsirkin @ 2022-09-21 19:24 UTC (permalink / raw) To: Alex Bennée Cc: chenh, raphael.norwitz, jasowang, kwolf, hreitz, qemu-block, houyl, zy, lulu, qemu-devel On Wed, Sep 21, 2022 at 07:23:12PM +0100, Alex Bennée wrote: > > chenh <chenh@yusur.tech> writes: > > > From: Hao Chen <chenh@yusur.tech> > > > > When use dpdk-vdpa tests vdpa device. You need to specify the mac address to > > start the virtual machine through libvirt or qemu, but now, the libvirt or > > qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config > > to get the mac address of the vdpa hardware without manual configuration. > > > > v1->v2: > > Only copy ETH_ALEN data of netcfg for some vdpa device such as > > NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. > > We only need the mac address and don't care about the status field. > > > > Signed-off-by: Hao Chen <chenh@yusur.tech> > > --- > > hw/block/vhost-user-blk.c | 1 - > > hw/net/virtio-net.c | 7 +++++++ > > hw/virtio/vhost-user.c | 19 ------------------- > > 3 files changed, 7 insertions(+), 20 deletions(-) > > > > diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c > > index 9117222456..5dca4eab09 100644 > > --- a/hw/block/vhost-user-blk.c > > +++ b/hw/block/vhost-user-blk.c > > @@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) > > > > vhost_dev_set_config_notifier(&s->dev, &blk_ops); > > > > - s->vhost_user.supports_config = true; > > <snip> > > NACK from me. The supports_config flag is there for a reason. Alex please, do not send NACKs. If you feel compelled to stress your point, provide extra justification instead. Thanks! > > > > diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c > > index bd24741be8..8b01078249 100644 > > --- a/hw/virtio/vhost-user.c > > +++ b/hw/virtio/vhost-user.c > > @@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > > } > > > > if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { > > - bool supports_f_config = vus->supports_config || > > - (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); > > uint64_t protocol_features; > > > > dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; > > @@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > > */ > > protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; > > > > - if (supports_f_config) { > > - if (!virtio_has_feature(protocol_features, > > - VHOST_USER_PROTOCOL_F_CONFIG)) { > > - error_setg(errp, "vhost-user device expecting " > > - "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " > > - "not support it."); > > - return -EPROTO; > > - } > > - } else { > > - if (virtio_has_feature(protocol_features, > > - VHOST_USER_PROTOCOL_F_CONFIG)) { > > - warn_reportf_err(*errp, "vhost-user backend supports " > > - "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); > > - protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); > > - } > > - } > > - > > /* final set of protocol features */ > > dev->protocol_features = protocol_features; > > err = vhost_user_set_protocol_features(dev, dev->protocol_features); > > > -- > Alex Bennée ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-21 19:24 ` Michael S. Tsirkin @ 2022-09-22 10:02 ` Alex Bennée 2022-09-22 10:19 ` Michael S. Tsirkin 0 siblings, 1 reply; 15+ messages in thread From: Alex Bennée @ 2022-09-22 10:02 UTC (permalink / raw) To: Michael S. Tsirkin Cc: chenh, raphael.norwitz, jasowang, kwolf, hreitz, qemu-block, houyl, zy, lulu, qemu-devel "Michael S. Tsirkin" <mst@redhat.com> writes: > On Wed, Sep 21, 2022 at 07:23:12PM +0100, Alex Bennée wrote: >> >> chenh <chenh@yusur.tech> writes: >> >> > From: Hao Chen <chenh@yusur.tech> >> > >> > When use dpdk-vdpa tests vdpa device. You need to specify the mac address to >> > start the virtual machine through libvirt or qemu, but now, the libvirt or >> > qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config >> > to get the mac address of the vdpa hardware without manual configuration. >> > >> > v1->v2: >> > Only copy ETH_ALEN data of netcfg for some vdpa device such as >> > NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. >> > We only need the mac address and don't care about the status field. >> > >> > Signed-off-by: Hao Chen <chenh@yusur.tech> >> > --- >> > hw/block/vhost-user-blk.c | 1 - >> > hw/net/virtio-net.c | 7 +++++++ >> > hw/virtio/vhost-user.c | 19 ------------------- >> > 3 files changed, 7 insertions(+), 20 deletions(-) >> > >> > diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c >> > index 9117222456..5dca4eab09 100644 >> > --- a/hw/block/vhost-user-blk.c >> > +++ b/hw/block/vhost-user-blk.c >> > @@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) >> > >> > vhost_dev_set_config_notifier(&s->dev, &blk_ops); >> > >> > - s->vhost_user.supports_config = true; >> >> <snip> >> >> NACK from me. The supports_config flag is there for a reason. > > > Alex please, do not send NACKs. If you feel compelled to stress > your point, provide extra justification instead. Thanks! OK I was objecting to ripping out the common vhost-user code which was implemented as a fix for behaviour found while attempting to upstream: Subject: [PATCH v4 for 7.2 00/22] virtio-gpio and various virtio cleanups Date: Tue, 2 Aug 2022 10:49:48 +0100 Message-Id: <20220802095010.3330793-1-alex.bennee@linaro.org> I vhost-user-blk wants to suppress its use of vhost-user config messages I guess that should be a control option but it sounds like a buggy back-end. > >> > >> > diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c >> > index bd24741be8..8b01078249 100644 >> > --- a/hw/virtio/vhost-user.c >> > +++ b/hw/virtio/vhost-user.c >> > @@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, >> > } >> > >> > if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { >> > - bool supports_f_config = vus->supports_config || >> > - (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); >> > uint64_t protocol_features; >> > >> > dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; >> > @@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, >> > */ >> > protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; >> > >> > - if (supports_f_config) { >> > - if (!virtio_has_feature(protocol_features, >> > - VHOST_USER_PROTOCOL_F_CONFIG)) { >> > - error_setg(errp, "vhost-user device expecting " >> > - "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " >> > - "not support it."); >> > - return -EPROTO; >> > - } >> > - } else { >> > - if (virtio_has_feature(protocol_features, >> > - VHOST_USER_PROTOCOL_F_CONFIG)) { >> > - warn_reportf_err(*errp, "vhost-user backend supports " >> > - "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); >> > - protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); >> > - } >> > - } >> > - >> > /* final set of protocol features */ >> > dev->protocol_features = protocol_features; >> > err = vhost_user_set_protocol_features(dev, dev->protocol_features); >> >> >> -- >> Alex Bennée -- Alex Bennée ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-22 10:02 ` Alex Bennée @ 2022-09-22 10:19 ` Michael S. Tsirkin 2022-09-23 3:30 ` 陈浩 0 siblings, 1 reply; 15+ messages in thread From: Michael S. Tsirkin @ 2022-09-22 10:19 UTC (permalink / raw) To: Alex Bennée Cc: chenh, raphael.norwitz, jasowang, kwolf, hreitz, qemu-block, houyl, zy, lulu, qemu-devel On Thu, Sep 22, 2022 at 11:02:56AM +0100, Alex Bennée wrote: > > "Michael S. Tsirkin" <mst@redhat.com> writes: > > > On Wed, Sep 21, 2022 at 07:23:12PM +0100, Alex Bennée wrote: > >> > >> chenh <chenh@yusur.tech> writes: > >> > >> > From: Hao Chen <chenh@yusur.tech> > >> > > >> > When use dpdk-vdpa tests vdpa device. You need to specify the mac address to > >> > start the virtual machine through libvirt or qemu, but now, the libvirt or > >> > qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config > >> > to get the mac address of the vdpa hardware without manual configuration. > >> > > >> > v1->v2: > >> > Only copy ETH_ALEN data of netcfg for some vdpa device such as > >> > NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. > >> > We only need the mac address and don't care about the status field. > >> > > >> > Signed-off-by: Hao Chen <chenh@yusur.tech> > >> > --- > >> > hw/block/vhost-user-blk.c | 1 - > >> > hw/net/virtio-net.c | 7 +++++++ > >> > hw/virtio/vhost-user.c | 19 ------------------- > >> > 3 files changed, 7 insertions(+), 20 deletions(-) > >> > > >> > diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c > >> > index 9117222456..5dca4eab09 100644 > >> > --- a/hw/block/vhost-user-blk.c > >> > +++ b/hw/block/vhost-user-blk.c > >> > @@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) > >> > > >> > vhost_dev_set_config_notifier(&s->dev, &blk_ops); > >> > > >> > - s->vhost_user.supports_config = true; > >> > >> <snip> > >> > >> NACK from me. The supports_config flag is there for a reason. > > > > > > Alex please, do not send NACKs. If you feel compelled to stress > > your point, provide extra justification instead. Thanks! > > OK I was objecting to ripping out the common vhost-user code which was > implemented as a fix for behaviour found while attempting to upstream: > > Subject: [PATCH v4 for 7.2 00/22] virtio-gpio and various virtio cleanups > Date: Tue, 2 Aug 2022 10:49:48 +0100 > Message-Id: <20220802095010.3330793-1-alex.bennee@linaro.org> > > I vhost-user-blk wants to suppress its use of vhost-user config messages > I guess that should be a control option but it sounds like a buggy > back-end. Thanks for the review! > > > >> > > >> > diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c > >> > index bd24741be8..8b01078249 100644 > >> > --- a/hw/virtio/vhost-user.c > >> > +++ b/hw/virtio/vhost-user.c > >> > @@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > >> > } > >> > > >> > if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { > >> > - bool supports_f_config = vus->supports_config || > >> > - (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); > >> > uint64_t protocol_features; > >> > > >> > dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; > >> > @@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, > >> > */ > >> > protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; > >> > > >> > - if (supports_f_config) { > >> > - if (!virtio_has_feature(protocol_features, > >> > - VHOST_USER_PROTOCOL_F_CONFIG)) { > >> > - error_setg(errp, "vhost-user device expecting " > >> > - "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " > >> > - "not support it."); > >> > - return -EPROTO; > >> > - } > >> > - } else { > >> > - if (virtio_has_feature(protocol_features, > >> > - VHOST_USER_PROTOCOL_F_CONFIG)) { > >> > - warn_reportf_err(*errp, "vhost-user backend supports " > >> > - "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); > >> > - protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); > >> > - } > >> > - } > >> > - > >> > /* final set of protocol features */ > >> > dev->protocol_features = protocol_features; > >> > err = vhost_user_set_protocol_features(dev, dev->protocol_features); > >> > >> > >> -- > >> Alex Bennée > > > -- > Alex Bennée ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically 2022-09-22 10:19 ` Michael S. Tsirkin @ 2022-09-23 3:30 ` 陈浩 0 siblings, 0 replies; 15+ messages in thread From: 陈浩 @ 2022-09-23 3:30 UTC (permalink / raw) To: Michael S. Tsirkin, Alex Bennée Cc: raphael.norwitz, jasowang, kwolf, hreitz, qemu-block, houyl, zy, lulu, qemu-devel On 2022/9/22 18:19, Michael S. Tsirkin wrote: > On Thu, Sep 22, 2022 at 11:02:56AM +0100, Alex Bennée wrote: >> "Michael S. Tsirkin" <mst@redhat.com> writes: >> >>> On Wed, Sep 21, 2022 at 07:23:12PM +0100, Alex Bennée wrote: >>>> chenh <chenh@yusur.tech> writes: >>>> >>>>> From: Hao Chen <chenh@yusur.tech> >>>>> >>>>> When use dpdk-vdpa tests vdpa device. You need to specify the mac address to >>>>> start the virtual machine through libvirt or qemu, but now, the libvirt or >>>>> qemu can call dpdk vdpa vendor driver's ops .get_config through vhost_net_get_config >>>>> to get the mac address of the vdpa hardware without manual configuration. >>>>> >>>>> v1->v2: >>>>> Only copy ETH_ALEN data of netcfg for some vdpa device such as >>>>> NVIDIA BLUEFIELD DPU(BF2)'s netcfg->status is not right. >>>>> We only need the mac address and don't care about the status field. >>>>> >>>>> Signed-off-by: Hao Chen <chenh@yusur.tech> >>>>> --- >>>>> hw/block/vhost-user-blk.c | 1 - >>>>> hw/net/virtio-net.c | 7 +++++++ >>>>> hw/virtio/vhost-user.c | 19 ------------------- >>>>> 3 files changed, 7 insertions(+), 20 deletions(-) >>>>> >>>>> diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c >>>>> index 9117222456..5dca4eab09 100644 >>>>> --- a/hw/block/vhost-user-blk.c >>>>> +++ b/hw/block/vhost-user-blk.c >>>>> @@ -337,7 +337,6 @@ static int vhost_user_blk_connect(DeviceState *dev, Error **errp) >>>>> >>>>> vhost_dev_set_config_notifier(&s->dev, &blk_ops); >>>>> >>>>> - s->vhost_user.supports_config = true; >>>> <snip> >>>> >>>> NACK from me. The supports_config flag is there for a reason. >>> >>> Alex please, do not send NACKs. If you feel compelled to stress >>> your point, provide extra justification instead. Thanks! >> OK I was objecting to ripping out the common vhost-user code which was >> implemented as a fix for behaviour found while attempting to upstream: >> >> Subject: [PATCH v4 for 7.2 00/22] virtio-gpio and various virtio cleanups >> Date: Tue, 2 Aug 2022 10:49:48 +0100 >> Message-Id: <20220802095010.3330793-1-alex.bennee@linaro.org> >> >> I vhost-user-blk wants to suppress its use of vhost-user config messages >> I guess that should be a control option but it sounds like a buggy >> back-end. > Thanks for the review! QEMU needs to obtain the mac address of the underlying vdpa hardware through the 'vhost_user_get_config' function, but this part of the check of virtio_blk makes 'vhost_user_get_config' unusable in virtio-net, because 'vhost_user_get_config' depends on the VHOST_USER_PROTOCOL_F_CONFIG feature, which is the key point of the problem. Currently I only need to use 'vhost_user_get_config' function, it seems not necessary to implement dev->config_ops && dev->config_ops->vhost_dev_config_notifier in virtio-net. Can this part of the checks be moved elsewhere? I don't know how to skip this part of the virtio blk related checks to achieve my functionality, so I removed those checks. 🙁 > >>>>> >>>>> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c >>>>> index bd24741be8..8b01078249 100644 >>>>> --- a/hw/virtio/vhost-user.c >>>>> +++ b/hw/virtio/vhost-user.c >>>>> @@ -2013,8 +2013,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, >>>>> } >>>>> >>>>> if (virtio_has_feature(features, VHOST_USER_F_PROTOCOL_FEATURES)) { >>>>> - bool supports_f_config = vus->supports_config || >>>>> - (dev->config_ops && dev->config_ops->vhost_dev_config_notifier); >>>>> uint64_t protocol_features; >>>>> >>>>> dev->backend_features |= 1ULL << VHOST_USER_F_PROTOCOL_FEATURES; >>>>> @@ -2033,23 +2031,6 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque, >>>>> */ >>>>> protocol_features &= VHOST_USER_PROTOCOL_FEATURE_MASK; >>>>> >>>>> - if (supports_f_config) { >>>>> - if (!virtio_has_feature(protocol_features, >>>>> - VHOST_USER_PROTOCOL_F_CONFIG)) { >>>>> - error_setg(errp, "vhost-user device expecting " >>>>> - "VHOST_USER_PROTOCOL_F_CONFIG but the vhost-user backend does " >>>>> - "not support it."); >>>>> - return -EPROTO; >>>>> - } >>>>> - } else { >>>>> - if (virtio_has_feature(protocol_features, >>>>> - VHOST_USER_PROTOCOL_F_CONFIG)) { >>>>> - warn_reportf_err(*errp, "vhost-user backend supports " >>>>> - "VHOST_USER_PROTOCOL_F_CONFIG but QEMU does not."); >>>>> - protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_CONFIG); >>>>> - } >>>>> - } >>>>> - >>>>> /* final set of protocol features */ >>>>> dev->protocol_features = protocol_features; >>>>> err = vhost_user_set_protocol_features(dev, dev->protocol_features); >>>> >>>> -- >>>> Alex Bennée >> >> -- >> Alex Bennée ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2022-09-23 7:02 UTC | newest] Thread overview: 15+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-09-21 6:00 [PATCH v2] hw/virtio/vhost-user: support obtain vdpa device's mac address automatically chenh 2022-09-21 17:56 ` Raphael Norwitz 2022-09-22 1:34 ` Jason Wang 2022-09-22 9:56 ` Michael S. Tsirkin 2022-09-23 3:21 ` 陈浩 2022-09-23 3:36 ` Jason Wang 2022-09-23 3:53 ` houyl 2022-09-23 4:05 ` Jason Wang 2022-09-23 6:19 ` Michael S. Tsirkin 2022-09-23 6:20 ` Michael S. Tsirkin 2022-09-21 18:23 ` Alex Bennée 2022-09-21 19:24 ` Michael S. Tsirkin 2022-09-22 10:02 ` Alex Bennée 2022-09-22 10:19 ` Michael S. Tsirkin 2022-09-23 3:30 ` 陈浩
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).