qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Fabiano Rosas <farosas@suse.de>
To: Juraj Marcin <jmarcin@redhat.com>, qemu-devel@nongnu.org
Cc: Juraj Marcin <jmarcin@redhat.com>,
	Jiri Denemark <jdenemar@redhat.com>, Peter Xu <peterx@redhat.com>,
	"Dr. David Alan Gilbert" <dave@treblig.org>
Subject: Re: [PATCH 1/4] migration: Do not try to start VM if disk activation fails
Date: Fri, 19 Sep 2025 13:12:30 -0300	[thread overview]
Message-ID: <87segito9d.fsf@suse.de> (raw)
In-Reply-To: <20250915115918.3520735-2-jmarcin@redhat.com>

Juraj Marcin <jmarcin@redhat.com> writes:

> From: Peter Xu <peterx@redhat.com>
>
> If a rare split brain happens (e.g. dest QEMU started running somehow,
> taking shared drive locks), src QEMU may not be able to activate the
> drives anymore.  In this case, src QEMU shouldn't start the VM or it might
> crash the block layer later with something like:
>
> bdrv_co_write_req_prepare: Assertion `!(bs->open_flags &
> BDRV_O_INACTIVE)' failed.

This patch doesn't fix the assert, so I think it's best not to mention
it at all. We've had a few instances of this assert (or similar) and
there's a fair chance someone still looks at git log searching for a
backport.

>
> Meanwhile, src QEMU cannot try to continue either even if dest QEMU can
> release the drive locks (e.g. by QMP "stop").  Because as long as dest QEMU
> started running, it means dest QEMU's RAM is the only version that is
> consistent with current status of the shared storage.
>
> Signed-off-by: Peter Xu <peterx@redhat.com>
> ---
>  migration/migration.c | 29 ++++++++++++++++++++++++-----
>  1 file changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/migration/migration.c b/migration/migration.c
> index 10c216d25d..54dac3db88 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -3502,6 +3502,8 @@ static MigIterateState migration_iteration_run(MigrationState *s)
>  
>  static void migration_iteration_finish(MigrationState *s)
>  {
> +    Error *local_err = NULL;
> +
>      bql_lock();
>  
>      /*
> @@ -3525,11 +3527,28 @@ static void migration_iteration_finish(MigrationState *s)
>      case MIGRATION_STATUS_FAILED:
>      case MIGRATION_STATUS_CANCELLED:
>      case MIGRATION_STATUS_CANCELLING:
> -        /*
> -         * Re-activate the block drives if they're inactivated.  Note, COLO
> -         * shouldn't use block_active at all, so it should be no-op there.
> -         */
> -        migration_block_activate(NULL);
> +        if (!migration_block_activate(&local_err)) {
> +            /*
> +            * Re-activate the block drives if they're inactivated.

Comment formatting is wrong.

> +            *
> +            * If it fails (e.g. in case of a split brain, where dest QEMU
> +            * might have taken some of the drive locks and running!), do
> +            * not start VM, instead wait for mgmt to decide the next step.
> +            *
> +            * If dest already started, it means dest QEMU should contain
> +            * all the data it needs and it properly owns all the drive
> +            * locks.  Then even if src QEMU got a FAILED in migration, it
> +            * normally should mean we should treat the migration as
> +            * COMPLETED.
> +            *
> +            * NOTE: it's not safe anymore to start VM on src now even if
> +            * dest would release the drive locks.  It's because as long as
> +            * dest started running then only dest QEMU's RAM is consistent
> +            * with the shared storage.
> +            */
> +            error_free(local_err);
> +            break;
> +        }
>          if (runstate_is_live(s->vm_old_state)) {
>              if (!runstate_check(RUN_STATE_SHUTDOWN)) {
>                  vm_start();

Reviewed-by: Fabiano Rosas <farosas@suse.de>


  reply	other threads:[~2025-09-19 16:13 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-15 11:59 [PATCH 0/4] migration: Introduce POSTCOPY_DEVICE state Juraj Marcin
2025-09-15 11:59 ` [PATCH 1/4] migration: Do not try to start VM if disk activation fails Juraj Marcin
2025-09-19 16:12   ` Fabiano Rosas [this message]
2025-09-15 11:59 ` [PATCH 2/4] migration: Accept MigrationStatus in migration_has_failed() Juraj Marcin
2025-09-19 14:57   ` Peter Xu
2025-09-22 11:26     ` Juraj Marcin
2025-09-15 11:59 ` [PATCH 3/4] migration: Refactor incoming cleanup into migration_incoming_finish() Juraj Marcin
2025-09-19 15:53   ` Peter Xu
2025-09-19 16:46   ` Fabiano Rosas
2025-09-22 12:58     ` Juraj Marcin
2025-09-22 15:51       ` Peter Xu
2025-09-22 17:40         ` Fabiano Rosas
2025-09-22 17:48           ` Peter Xu
2025-09-23 14:58         ` Juraj Marcin
2025-09-23 16:17           ` Peter Xu
2025-09-15 11:59 ` [PATCH 4/4] migration: Introduce POSTCOPY_DEVICE state Juraj Marcin
2025-09-19 16:58   ` Peter Xu
2025-09-19 17:50     ` Peter Xu
2025-09-22 13:34       ` Juraj Marcin
2025-09-22 16:16         ` Peter Xu
2025-09-23 14:23           ` Juraj Marcin
2025-09-25 11:54   ` Jiří Denemark
2025-09-25 18:22     ` Peter Xu
2025-09-30  7:53       ` Jiří Denemark
2025-09-30 20:04         ` Peter Xu
2025-10-01  8:43           ` Jiří Denemark
2025-10-01 11:05             ` Dr. David Alan Gilbert
2025-10-01 14:26               ` Jiří Denemark
2025-10-01 15:53                 ` Dr. David Alan Gilbert
2025-10-01 15:10               ` Daniel P. Berrangé
2025-10-02 12:17                 ` Jiří Denemark
2025-10-02 13:12                   ` Dr. David Alan Gilbert
2025-10-01 10:09           ` Juraj Marcin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87segito9d.fsf@suse.de \
    --to=farosas@suse.de \
    --cc=dave@treblig.org \
    --cc=jdenemar@redhat.com \
    --cc=jmarcin@redhat.com \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).