qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Alex Bennée" <alex.bennee@linaro.org>
To: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-devel@nongnu.org, peter.maydell@linaro.org
Subject: Re: [Qemu-devel] [PATCH 0/9] target/arm: Fixups for ARM_FEATURE_V8_FP16
Date: Fri, 27 Apr 2018 19:55:47 +0100	[thread overview]
Message-ID: <87vaccjx70.fsf@linaro.org> (raw)
In-Reply-To: <87wowsk1ih.fsf@linaro.org>


Alex Bennée <alex.bennee@linaro.org> writes:

> Richard Henderson <richard.henderson@linaro.org> writes:
>
>> When running the gcc testsuite with current aarch64-linux-user,
>> the testsuite detects the presence of the fp16 extension and
>> enables lots of extra tests for builtins.
>>
>> Quite a few of these new tests fail because we missed implementing
>> some instructions.  We really should go back and verify that nothing
>> else is missing from this (rather large) extension.
>
> So this set of instructions is generated from any ASL description that
> contains "half":
<snip>
>
> Failed 9 tests:
> testcases.armv8.2_half/insn_FCCMP_H_floatccmp__INC.risu.bin
> testcases.armv8.2_half/insn_FCCMPE_H_floatccmp__INC.risu.bin
> testcases.armv8.2_half/insn_FCMP_H_floatcmp__INC.risu.bin
> testcases.armv8.2_half/insn_FCMP_HZ_floatcmp__INC.risu.bin
> testcases.armv8.2_half/insn_FCMPE_H_floatcmp__INC.risu.bin
> testcases.armv8.2_half/insn_FCMPE_HZ_floatcmp__INC.risu.bin
> testcases.armv8.2_half/insn_FCSEL_H_floatsel__INC.risu.bin

Well that looks like a whole class of compares we are missing. I'll get
to work on that.

> testcases.armv8.2_half/insn_FMOV_H_floatimm__INC.risu.bin
> testcases.armv8.2_half/insn_FSQRT_H_floatdp1__INC.risu.bin
>
> but I haven't checked to see if that is just instructions the FVP has in
> full SVE mode that aren't in the just FP16 fixes branch I was testing
> against.
>
>
>>
>> In addition, it tests some edge conditions on data that show flaws
>> in the way we were performing integer<->fp conversion; particularly
>> with respect to scaled conversion.
>>
>>
>> r~
>>
>> PS: FWIW, this was written against my tgt-arm-sve-9 tree, since I
>> was trying to test sve as generated by gcc.  I don't *think* there
>> are any dependencies on any of the sve patches, but I didn't check.
>>
>> PPS: There are two more failures that might be qemu fp16 failures,
>> but those are SIGSEGV.  This patch set cures all of the SIGILL and
>> (subsequent) SIGABRT type failures within the testsuite.
>>
>>
>> Richard Henderson (9):
>>   target/arm: Implement vector shifted SCVF/UCVF for fp16
>>   target/arm: Implement vector shifted FCVT for fp16
>>   target/arm: Fix float16 to/from int16
>>   target/arm: Clear SVE high bits for FMOV
>>   target/arm: Implement FMOV (general) for fp16
>>   target/arm: Implement FCVT (scalar,integer) for fp16
>>   target/arm: Implement FCVT (scalar,fixed-point) for fp16
>>   target/arm: Implement FP data-processing (2 source) for fp16
>>   target/arm: Implement FP data-processing (3 source) for fp16
>>
>>  target/arm/helper.h        |   6 +
>>  target/arm/helper.c        |  87 ++++++++++-
>>  target/arm/translate-a64.c | 371 +++++++++++++++++++++++++++++++++++++--------
>>  3 files changed, 399 insertions(+), 65 deletions(-)


--
Alex Bennée

  reply	other threads:[~2018-04-27 18:55 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-25  1:22 [Qemu-devel] [PATCH 0/9] target/arm: Fixups for ARM_FEATURE_V8_FP16 Richard Henderson
2018-04-25  1:22 ` [Qemu-devel] [PATCH 1/9] target/arm: Implement vector shifted SCVF/UCVF for fp16 Richard Henderson
2018-04-27 16:04   ` Alex Bennée
2018-04-29 14:44     ` Richard Henderson
2018-04-29 15:27       ` Peter Maydell
2018-04-25  1:22 ` [Qemu-devel] [PATCH 2/9] target/arm: Implement vector shifted FCVT " Richard Henderson
2018-04-30 15:55   ` Alex Bennée
2018-04-25  1:22 ` [Qemu-devel] [PATCH 3/9] target/arm: Fix float16 to/from int16 Richard Henderson
2018-05-01 10:10   ` Alex Bennée
2018-04-25  1:22 ` [Qemu-devel] [PATCH 4/9] target/arm: Clear SVE high bits for FMOV Richard Henderson
2018-05-01 10:44   ` Alex Bennée
2018-04-25  1:22 ` [Qemu-devel] [PATCH 5/9] target/arm: Implement FMOV (general) for fp16 Richard Henderson
2018-04-25  1:31   ` Philippe Mathieu-Daudé
2018-04-25  8:40     ` Richard Henderson
2018-04-25  1:22 ` [Qemu-devel] [PATCH 6/9] target/arm: Implement FCVT (scalar, integer) " Richard Henderson
2018-05-01 10:55   ` Alex Bennée
2018-04-25  1:22 ` [Qemu-devel] [PATCH 7/9] target/arm: Implement FCVT (scalar, fixed-point) " Richard Henderson
2018-05-01 10:57   ` Alex Bennée
2018-04-25  1:22 ` [Qemu-devel] [PATCH 8/9] target/arm: Implement FP data-processing (2 source) " Richard Henderson
2018-05-01 11:13   ` Alex Bennée
2018-05-02 18:28     ` Richard Henderson
2018-05-02 18:47     ` Richard Henderson
2018-04-25  1:23 ` [Qemu-devel] [PATCH 9/9] target/arm: Implement FP data-processing (3 " Richard Henderson
2018-05-01 11:21   ` Alex Bennée
2018-05-02 18:49     ` Richard Henderson
2018-04-25  1:35 ` [Qemu-devel] [PATCH 0/9] target/arm: Fixups for ARM_FEATURE_V8_FP16 no-reply
2018-04-25  9:14 ` Alex Bennée
2018-04-27 17:22 ` Alex Bennée
2018-04-27 18:55   ` Alex Bennée [this message]
2018-04-27 19:50     ` Alex Bennée
2018-05-11  2:17   ` Richard Henderson
2018-05-11 21:13     ` Alex Bennée
2018-05-01 15:47 ` Alex Bennée
2018-05-01 18:35   ` Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87vaccjx70.fsf@linaro.org \
    --to=alex.bennee@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).