From: "Alex Bennée" <alex.bennee@linaro.org>
To: Richard Henderson <richard.henderson@linaro.org>
Cc: fam@euphon.net, berrange@redhat.com, pbonzini@redhat.com,
aaron@os.amperecomputing.com, qemu-devel@nongnu.org,
robhenry@microsoft.com, f4bug@amsat.org,
mahmoudabdalghany@outlook.com, minyihh@uci.edu, cota@braap.org,
stefanha@redhat.com, crosa@redhat.com, kuhn.chenqun@huawei.com,
ma.mandourr@gmail.com, aurelien@aurel32.net
Subject: Re: [PATCH v2 26/39] tests/tcg: make test-mmap a little less aggressive
Date: Fri, 09 Jul 2021 11:51:24 +0100 [thread overview]
Message-ID: <87y2afsqs3.fsf@linaro.org> (raw)
In-Reply-To: <277c97f3-b2d8-639f-a251-099287e5a733@linaro.org>
Richard Henderson <richard.henderson@linaro.org> writes:
> On 7/8/21 12:09 PM, Alex Bennée wrote:
>> - for (i = 0; i < 0x1fff; i++)
>> + for (i = 0; i < 0x1ff; i++)
>> {
>> size_t len;
>> len = pagesize + (pagesize * i & 7);
>
> There's really no point in i >= 8.
>
> We release all of the memory at the end of the loop; we'll probably
> get back the same pages on the 8'th iteration.
>
>
>> - for (i = 0; i < 0x2fff; i++)
>> + for (i = 0; i < 0x2ff; i++)
>
> I'm not sure why this one is iterating more than twice?
OK cutting it down to 8 and 2 with white space cleanup and removing the
timeout hack gives:
--8<---------------cut here---------------start------------->8---
tests/tcg: make test-mmap a little less aggressive
The check_aligned_anonymous_unfixed_mmaps and
check_aligned_anonymous_unfixed_colliding_mmaps do a lot of mmap's and
copying of data. This is especially unfriendly to targets like hexagon
which have quite large pages and need to do sanity checks on each
memory access.
While we are at it clean-up the white space and style issues from the
legacy code. As we no longer do quite so much needless memory access
we can also remove the hexagon timeout hack.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
v3
- style and whitespace cleanups, reduce loop even further.
- remove hexagon timeout hack
2 files changed, 102 insertions(+), 113 deletions(-)
tests/tcg/multiarch/test-mmap.c | 206 +++++++++++++++++++-------------------
tests/tcg/hexagon/Makefile.target | 9 --
modified tests/tcg/multiarch/test-mmap.c
@@ -49,64 +49,62 @@ size_t test_fsize;
void check_aligned_anonymous_unfixed_mmaps(void)
{
- void *p1;
- void *p2;
- void *p3;
- void *p4;
- void *p5;
- uintptr_t p;
- int i;
-
- fprintf(stdout, "%s", __func__);
- for (i = 0; i < 0x1fff; i++)
- {
- size_t len;
-
- len = pagesize + (pagesize * i & 7);
- p1 = mmap(NULL, len, PROT_READ,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- p2 = mmap(NULL, len, PROT_READ,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- p3 = mmap(NULL, len, PROT_READ,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- p4 = mmap(NULL, len, PROT_READ,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- p5 = mmap(NULL, len, PROT_READ,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-
- /* Make sure we get pages aligned with the pagesize. The
- target expects this. */
- fail_unless (p1 != MAP_FAILED);
- fail_unless (p2 != MAP_FAILED);
- fail_unless (p3 != MAP_FAILED);
- fail_unless (p4 != MAP_FAILED);
- fail_unless (p5 != MAP_FAILED);
- p = (uintptr_t) p1;
- D(printf ("p=%x\n", p));
- fail_unless ((p & pagemask) == 0);
- p = (uintptr_t) p2;
- fail_unless ((p & pagemask) == 0);
- p = (uintptr_t) p3;
- fail_unless ((p & pagemask) == 0);
- p = (uintptr_t) p4;
- fail_unless ((p & pagemask) == 0);
- p = (uintptr_t) p5;
- fail_unless ((p & pagemask) == 0);
-
- /* Make sure we can read from the entire area. */
- memcpy (dummybuf, p1, pagesize);
- memcpy (dummybuf, p2, pagesize);
- memcpy (dummybuf, p3, pagesize);
- memcpy (dummybuf, p4, pagesize);
- memcpy (dummybuf, p5, pagesize);
-
- munmap (p1, len);
- munmap (p2, len);
- munmap (p3, len);
- munmap (p4, len);
- munmap (p5, len);
- }
- fprintf(stdout, " passed\n");
+ void *p1;
+ void *p2;
+ void *p3;
+ void *p4;
+ void *p5;
+ uintptr_t p;
+ int i;
+ fprintf(stdout, "%s", __func__);
+ for (i = 0; i < 8; i++) {
+ size_t len;
+ len = pagesize + (pagesize * i);
+ p1 = mmap(NULL, len, PROT_READ,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ p2 = mmap(NULL, len, PROT_READ,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ p3 = mmap(NULL, len, PROT_READ,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ p4 = mmap(NULL, len, PROT_READ,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ p5 = mmap(NULL, len, PROT_READ,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+
+ /*
+ * Make sure we get pages aligned with the pagesize. The
+ * target expects this.
+ */
+ fail_unless (p1 != MAP_FAILED);
+ fail_unless (p2 != MAP_FAILED);
+ fail_unless (p3 != MAP_FAILED);
+ fail_unless (p4 != MAP_FAILED);
+ fail_unless (p5 != MAP_FAILED);
+ p = (uintptr_t) p1;
+ D(printf ("p=%x\n", p));
+ fail_unless ((p & pagemask) == 0);
+ p = (uintptr_t) p2;
+ fail_unless ((p & pagemask) == 0);
+ p = (uintptr_t) p3;
+ fail_unless ((p & pagemask) == 0);
+ p = (uintptr_t) p4;
+ fail_unless ((p & pagemask) == 0);
+ p = (uintptr_t) p5;
+ fail_unless ((p & pagemask) == 0);
+
+ /* Make sure we can read from the entire area. */
+ memcpy (dummybuf, p1, pagesize);
+ memcpy (dummybuf, p2, pagesize);
+ memcpy (dummybuf, p3, pagesize);
+ memcpy (dummybuf, p4, pagesize);
+ memcpy (dummybuf, p5, pagesize);
+ munmap (p1, len);
+ munmap (p2, len);
+ munmap (p3, len);
+ munmap (p4, len);
+ munmap (p5, len);
+ }
+ fprintf(stdout, " passed\n");
}
void check_large_anonymous_unfixed_mmap(void)
@@ -135,52 +133,52 @@ void check_large_anonymous_unfixed_mmap(void)
void check_aligned_anonymous_unfixed_colliding_mmaps(void)
{
- char *p1;
- char *p2;
- char *p3;
- uintptr_t p;
- int i;
-
- fprintf(stdout, "%s", __func__);
- for (i = 0; i < 0x2fff; i++)
- {
- int nlen;
- p1 = mmap(NULL, pagesize, PROT_READ,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- fail_unless (p1 != MAP_FAILED);
- p = (uintptr_t) p1;
- fail_unless ((p & pagemask) == 0);
- memcpy (dummybuf, p1, pagesize);
-
- p2 = mmap(NULL, pagesize, PROT_READ,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- fail_unless (p2 != MAP_FAILED);
- p = (uintptr_t) p2;
- fail_unless ((p & pagemask) == 0);
- memcpy (dummybuf, p2, pagesize);
-
-
- munmap (p1, pagesize);
- nlen = pagesize * 8;
- p3 = mmap(NULL, nlen, PROT_READ,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- fail_unless (p3 != MAP_FAILED);
-
- /* Check if the mmaped areas collide. */
- if (p3 < p2
- && (p3 + nlen) > p2)
- fail_unless (0);
-
- memcpy (dummybuf, p3, pagesize);
-
- /* Make sure we get pages aligned with the pagesize. The
- target expects this. */
- p = (uintptr_t) p3;
- fail_unless ((p & pagemask) == 0);
- munmap (p2, pagesize);
- munmap (p3, nlen);
- }
- fprintf(stdout, " passed\n");
+ char *p1;
+ char *p2;
+ char *p3;
+ uintptr_t p;
+ int i;
+
+ fprintf(stdout, "%s", __func__);
+ for (i = 0; i < 2; i++) {
+ int nlen;
+ p1 = mmap(NULL, pagesize, PROT_READ,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ fail_unless (p1 != MAP_FAILED);
+ p = (uintptr_t) p1;
+ fail_unless ((p & pagemask) == 0);
+ memcpy (dummybuf, p1, pagesize);
+
+ p2 = mmap(NULL, pagesize, PROT_READ,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ fail_unless (p2 != MAP_FAILED);
+ p = (uintptr_t) p2;
+ fail_unless ((p & pagemask) == 0);
+ memcpy (dummybuf, p2, pagesize);
+
+
+ munmap (p1, pagesize);
+ nlen = pagesize * 8;
+ p3 = mmap(NULL, nlen, PROT_READ,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ fail_unless (p3 != MAP_FAILED);
+
+ /* Check if the mmaped areas collide. */
+ if (p3 < p2
+ && (p3 + nlen) > p2) {
+ fail_unless (0);
+ }
+
+ memcpy (dummybuf, p3, pagesize);
+
+ /* Make sure we get pages aligned with the pagesize. The
+ target expects this. */
+ p = (uintptr_t) p3;
+ fail_unless ((p & pagemask) == 0);
+ munmap (p2, pagesize);
+ munmap (p3, nlen);
+ }
+ fprintf(stdout, " passed\n");
}
void check_aligned_anonymous_fixed_mmaps(void)
modified tests/tcg/hexagon/Makefile.target
@@ -18,15 +18,6 @@
# Hexagon doesn't support gdb, so skip the EXTRA_RUNS
EXTRA_RUNS =
-# Hexagon has 64K pages, so increase the timeout to keep
-# test-mmap from timing out
-ifeq ($(CONFIG_DEBUG_TCG),y)
-TIMEOUT=800
-else
-TIMEOUT=500
-endif
-
-
CFLAGS += -Wno-incompatible-pointer-types -Wno-undefined-internal
CFLAGS += -fno-unroll-loops
--8<---------------cut here---------------end--------------->8---
--
Alex Bennée
next prev parent reply other threads:[~2021-07-09 10:53 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-08 19:09 [PATCH v2 for 6.1 00/39] testing and plugins pre-PR series Alex Bennée
2021-07-08 19:09 ` [PATCH v2 01/39] Jobs based on custom runners: documentation and configuration placeholder Alex Bennée
2021-07-08 19:09 ` [PATCH v2 02/39] Jobs based on custom runners: build environment docs and playbook Alex Bennée
2021-07-08 19:09 ` [PATCH v2 03/39] Jobs based on custom runners: docs and gitlab-runner setup playbook Alex Bennée
2021-07-08 19:09 ` [PATCH v2 04/39] Jobs based on custom runners: add job definitions for QEMU's machines Alex Bennée
2021-07-08 19:09 ` [PATCH v2 05/39] tests/tcg: also disable the signals test for plugins Alex Bennée
2021-07-08 20:12 ` Richard Henderson
2021-07-08 19:09 ` [PATCH v2 06/39] build: validate that system capstone works before using it Alex Bennée
2021-07-08 20:14 ` Richard Henderson
2021-07-08 19:09 ` [PATCH v2 07/39] gitlab: support for FreeBSD 12, 13 and macOS 11 via cirrus-run Alex Bennée
2021-07-08 19:09 ` [PATCH v2 08/39] cirrus: delete FreeBSD and macOS jobs Alex Bennée
2021-07-08 19:09 ` [PATCH v2 09/39] hw/usb/ccid: remove references to NSS Alex Bennée
2021-07-08 19:09 ` [PATCH v2 10/39] tests/docker: don't use BUILDKIT in GitLab either Alex Bennée
2021-07-08 19:09 ` [PATCH v2 11/39] tests/docker: use project specific container registries Alex Bennée
2021-07-08 19:09 ` [PATCH v2 12/39] tests/docker: use explicit docker.io registry Alex Bennée
2021-07-08 19:09 ` [PATCH v2 13/39] tests/docker: remove FEATURES env var from templates Alex Bennée
2021-07-08 19:09 ` [PATCH v2 14/39] tests/docker: fix sorting in package lists Alex Bennée
2021-07-08 19:09 ` [PATCH v2 15/39] tests/docker: fix mistakes in centos " Alex Bennée
2021-07-08 19:09 ` [PATCH v2 16/39] tests/docker: fix mistakes in fedora package list Alex Bennée
2021-07-08 19:09 ` [PATCH v2 17/39] tests/docker: fix mistakes in ubuntu package lists Alex Bennée
2021-07-08 19:09 ` [PATCH v2 18/39] tests/docker: remove mingw packages from Fedora Alex Bennée
2021-07-08 19:09 ` [PATCH v2 19/39] tests/docker: expand centos8 package list Alex Bennée
2021-07-08 19:09 ` [PATCH v2 20/39] tests/docker: expand fedora " Alex Bennée
2021-07-08 19:09 ` [PATCH v2 21/39] tests/docker: expand ubuntu1804 " Alex Bennée
2021-07-08 19:09 ` [PATCH v2 22/39] tests/docker: expand ubuntu2004 " Alex Bennée
2021-07-08 19:09 ` [PATCH v2 23/39] tests/docker: expand opensuse-leap " Alex Bennée
2021-07-08 19:09 ` [PATCH v2 24/39] tests/vm: update NetBSD to 9.2 Alex Bennée
2021-07-08 19:09 ` [PATCH v2 25/39] tests/vm: update openbsd to release 6.9 Alex Bennée
2021-07-08 19:09 ` [PATCH v2 26/39] tests/tcg: make test-mmap a little less aggressive Alex Bennée
2021-07-08 20:29 ` Richard Henderson
2021-07-09 10:51 ` Alex Bennée [this message]
2021-07-09 7:15 ` Thomas Huth
2021-07-08 19:09 ` [PATCH v2 27/39] plugins: fix-up handling of internal hostaddr for 32 bit Alex Bennée
2021-07-08 20:31 ` Richard Henderson
2021-07-08 19:09 ` [PATCH v2 28/39] meson.build: move TCG plugin summary output Alex Bennée
2021-07-08 19:39 ` Philippe Mathieu-Daudé
2021-07-08 20:31 ` Richard Henderson
2021-07-08 19:09 ` [PATCH v2 29/39] configure: don't allow plugins to be enabled for a non-TCG build Alex Bennée
2021-07-08 20:32 ` Richard Henderson
2021-07-08 19:09 ` [PATCH v2 30/39] configure: stop user enabling plugins on Windows for now Alex Bennée
2021-07-08 20:33 ` Richard Henderson
2021-07-08 19:09 ` [PATCH v2 31/39] tcg/plugins: enable by default for TCG builds Alex Bennée
2021-07-08 20:41 ` Richard Henderson
2021-07-08 19:09 ` [PATCH v2 32/39] contrib/plugins: enable -Wall for building plugins Alex Bennée
2021-07-08 20:44 ` Richard Henderson
2021-07-08 19:09 ` [PATCH v2 33/39] contrib/plugins: add execlog to log instruction execution and memory access Alex Bennée
2021-07-08 19:09 ` [PATCH v2 34/39] docs/devel: tcg-plugins: add execlog plugin description Alex Bennée
2021-07-08 19:09 ` [PATCH v2 35/39] plugins: Added a new cache modelling plugin Alex Bennée
2021-07-08 19:09 ` [PATCH v2 36/39] plugins/cache: Enable cache parameterization Alex Bennée
2021-07-08 19:09 ` [PATCH v2 37/39] plugins/cache: Added FIFO and LRU eviction policies Alex Bennée
2021-07-08 19:09 ` [PATCH v2 38/39] docs/devel: Added cache plugin to the plugins docs Alex Bennée
2021-07-08 19:09 ` [PATCH v2 39/39] MAINTAINERS: Added myself as a reviewer for TCG Plugins Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87y2afsqs3.fsf@linaro.org \
--to=alex.bennee@linaro.org \
--cc=aaron@os.amperecomputing.com \
--cc=aurelien@aurel32.net \
--cc=berrange@redhat.com \
--cc=cota@braap.org \
--cc=crosa@redhat.com \
--cc=f4bug@amsat.org \
--cc=fam@euphon.net \
--cc=kuhn.chenqun@huawei.com \
--cc=ma.mandourr@gmail.com \
--cc=mahmoudabdalghany@outlook.com \
--cc=minyihh@uci.edu \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=robhenry@microsoft.com \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).