[Qemu-devel] [PATCH 00/25] Kconfig dependencies for ARM machines

[Qemu-devel] [PATCH 00/25] Kconfig dependencies for ARM machines

[Thomas Huth]

This series reworks the default-configs/arm-softmmu.mak and
default-configs/aarch64-softmmu.mak files to use the new Kconfig-style
dependencies instead.

Based-on: 1549562254-41157-1-git-send-email-pbonzini@redhat.com
          ("Support Kconfig in QEMU")

The first half of the patches is slightly based on the work by Ákos Kovács:

https://lists.nongnu.org/archive/html/qemu-devel/2013-08/msg03730.html

The second part has been created by looking at the sources and finding
out the dependencies the hard way via trial-and-error (i.e. by enabling
only one machine at a time and checking whether it can be compiled and
started).

NB: One thing I noticed while working on these patches: We should
tidy up the dependencies of AHCI and SDHCI. Both currently depend
on PCI, but some boards that do not have PCI also want to use them
(via sysbus devices)... but that's a clean-up for the future, this
series here is already big enough.

Thomas Huth (25):
  hw/arm: Express dependencies of the exynos machines with Kconfig
  hw/arm: Express dependencies of the highbank machines with Kconfig
  hw/arm: Express dependencies of integratorcp with Kconfig
  hw/arm: Express dependencies of the fsl-imx31 machine with Kconfig
  hw/arm: Express dependencies of musicpal with Kconfig
  hw/arm: Express dependencies of the OMAP machines with Kconfig
  hw/arm: Express dependencies of stellaris with Kconfig
  hw/arm: Express dependencies of realview, versatile and vexpress with
    Kconfig
  hw/arm: Express dependencies of the PXA2xx machines with Kconfig
  hw/arm: Express dependencies of xilinx-zynq with Kconfig
  hw/arm: Express dependencies of collie with Kconfig
  hw/arm: Express dependencies of the aspeed boards with Kconfig
  hw/arm: Express dependencies of the virt machine with Kconfig
  hw/arm: Express dependencies of netduino / stm32f2xx with Kconfig
  hw/arm: Express dependencies of allwinner / cubieboard with Kconfig
  hw/arm: Express dependencies of the MPS2 boards with Kconfig
  hw/arm: Express dependencies of the raspi machines with Kconfig
  hw/arm: Express dependencies of canon-a1100 with Kconfig
  hw/arm: Express dependencies of sabrelite with Kconfig
  hw/arm: Express dependencies of the MSF2 machine with Kconfig
  hw/arm: Express dependencies for remaining IMX boards with Kconfig
  hw/arm: Express dependencies of nrf51 Kconfig
  hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig
  hw/arm: Express dependencies of the xlnx-versal-virt machine with
    Kconfig
  hw/arm: Remove hard-enablement of the remaining PCI devices

 default-configs/aarch64-softmmu.mak |   4 -
 default-configs/arm-softmmu.mak     | 175 +++-----------------
 hw/arm/Kconfig                      | 310 ++++++++++++++++++++++++++++++++++++
 hw/arm/Makefile.objs                |  19 ++-
 hw/display/Kconfig                  |   3 +
 hw/i2c/Kconfig                      |   2 +-
 hw/misc/Kconfig                     |   2 +
 7 files changed, 354 insertions(+), 161 deletions(-)

-- 
1.8.3.1

[Qemu-devel] [PATCH 01/25] hw/arm: Express dependencies of the exynos machines with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the Exynos-related boards (nuri and
smdkc210).
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 16 ++++++----------
 hw/arm/Kconfig                  | 11 +++++++++++
 2 files changed, 17 insertions(+), 10 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 8283aeb..3baafc4 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -1,7 +1,12 @@
 # Default configuration for arm-softmmu
 
-CONFIG_PCI=y
+# TODO: ARM_V7M is currently always required - make this more flexible!
+CONFIG_ARM_V7M=y
+
 CONFIG_PCI_DEVICES=y
+
+CONFIG_EXYNOS4=y
+
 CONFIG_VGA=y
 CONFIG_NAND=y
 CONFIG_ECC=y
@@ -25,7 +30,6 @@ CONFIG_ADS7846=y
 CONFIG_MAX111X=y
 CONFIG_SSI_SD=y
 CONFIG_SSI_M25P80=y
-CONFIG_LAN9118=y
 CONFIG_SMC91C111=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
@@ -35,7 +39,6 @@ CONFIG_PFLASH_CFI01=y
 CONFIG_PFLASH_CFI02=y
 CONFIG_MICRODRIVE=y
 CONFIG_USB_MUSB=y
-CONFIG_USB_EHCI_SYSBUS=y
 CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
@@ -43,13 +46,9 @@ CONFIG_ARM11MPCORE=y
 CONFIG_A9MPCORE=y
 CONFIG_A15MPCORE=y
 
-CONFIG_ARM_V7M=y
 CONFIG_NETDUINO2=y
 
-CONFIG_ARM_GIC=y
 CONFIG_ARM_TIMER=y
-CONFIG_ARM_MPTIMER=y
-CONFIG_A9_GTIMER=y
 CONFIG_PL011=y
 CONFIG_PL022=y
 CONFIG_PL031=y
@@ -60,11 +59,9 @@ CONFIG_PL080=y
 CONFIG_PL110=y
 CONFIG_PL181=y
 CONFIG_PL190=y
-CONFIG_PL310=y
 CONFIG_PL330=y
 CONFIG_CADENCE=y
 CONFIG_XGMAC=y
-CONFIG_EXYNOS4=y
 CONFIG_PXA2XX=y
 CONFIG_BITBANG_I2C=y
 CONFIG_FRAMEBUFFER=y
@@ -72,7 +69,6 @@ CONFIG_XILINX_SPIPS=y
 CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_ARM11SCU=y
-CONFIG_A9SCU=y
 CONFIG_DIGIC=y
 CONFIG_MARVELL_88W8618=y
 CONFIG_OMAP=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 3176680..2850000 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -7,7 +7,14 @@ config DIGIC
 
 config EXYNOS4
     bool
+    select A9MPCORE
+    select I2C
+    select LAN9118
+    select PCI
+    select PL310 # cache controller
     select PTIMER
+    select SDHCI
+    select USB_EHCI_SYSBUS
 
 config HIGHBANK
     bool
@@ -109,6 +116,10 @@ config ZAURUS
 
 config A9MPCORE
     bool
+    select A9_GTIMER
+    select A9SCU       # snoop control unit
+    select ARM_GIC
+    select ARM_MPTIMER
 
 config A15MPCORE
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 02/25] hw/arm: Express dependencies of the highbank machines with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the highbank machine (and the midway
machine).
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  4 +---
 hw/arm/Kconfig                  | 12 ++++++++++++
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 3baafc4..59734ee 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -6,6 +6,7 @@ CONFIG_ARM_V7M=y
 CONFIG_PCI_DEVICES=y
 
 CONFIG_EXYNOS4=y
+CONFIG_HIGHBANK=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
@@ -54,14 +55,12 @@ CONFIG_PL022=y
 CONFIG_PL031=y
 CONFIG_PL041=y
 CONFIG_PL050=y
-CONFIG_PL061=y
 CONFIG_PL080=y
 CONFIG_PL110=y
 CONFIG_PL181=y
 CONFIG_PL190=y
 CONFIG_PL330=y
 CONFIG_CADENCE=y
-CONFIG_XGMAC=y
 CONFIG_PXA2XX=y
 CONFIG_BITBANG_I2C=y
 CONFIG_FRAMEBUFFER=y
@@ -151,7 +150,6 @@ CONFIG_XILINX_AXI=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
 
 CONFIG_STRONGARM=y
-CONFIG_HIGHBANK=y
 CONFIG_MUSICPAL=y
 
 # for realview and versatilepb
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 2850000..984de8a 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -18,6 +18,18 @@ config EXYNOS4
 
 config HIGHBANK
     bool
+    select A9MPCORE
+    select A15MPCORE
+    select AHCI
+    select ARM_TIMER # sp804
+    select ARM_V7M
+    select PCI
+    select PL011 # UART
+    select PL022 # Serial port
+    select PL031 # RTC
+    select PL061 # GPIO
+    select PL310 # cache controller
+    select XGMAC # ethernet
 
 config INTEGRATOR
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 03/25] hw/arm: Express dependencies of integratorcp with Kconfig

[Thomas Huth]

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 11 +----------
 hw/arm/Kconfig                  |  9 +++++++++
 hw/display/Kconfig              |  1 +
 3 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 59734ee..2033050 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -7,6 +7,7 @@ CONFIG_PCI_DEVICES=y
 
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
+CONFIG_INTEGRATOR=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
@@ -31,7 +32,6 @@ CONFIG_ADS7846=y
 CONFIG_MAX111X=y
 CONFIG_SSI_SD=y
 CONFIG_SSI_M25P80=y
-CONFIG_SMC91C111=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
 CONFIG_FTGMAC100=y
@@ -49,15 +49,8 @@ CONFIG_A15MPCORE=y
 
 CONFIG_NETDUINO2=y
 
-CONFIG_ARM_TIMER=y
-CONFIG_PL011=y
-CONFIG_PL022=y
-CONFIG_PL031=y
 CONFIG_PL041=y
-CONFIG_PL050=y
 CONFIG_PL080=y
-CONFIG_PL110=y
-CONFIG_PL181=y
 CONFIG_PL190=y
 CONFIG_PL330=y
 CONFIG_CADENCE=y
@@ -119,8 +112,6 @@ CONFIG_VFIO_XGMAC=y
 CONFIG_VFIO_AMD_XGBE=y
 
 CONFIG_SDHCI=y
-CONFIG_INTEGRATOR=y
-CONFIG_INTEGRATOR_DEBUG=y
 
 CONFIG_ALLWINNER_A10_PIT=y
 CONFIG_ALLWINNER_A10_PIC=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 984de8a..c022b8d 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -33,6 +33,15 @@ config HIGHBANK
 
 config INTEGRATOR
     bool
+    select ARM_TIMER
+    select INTEGRATOR_DEBUG
+    select PL011 # UART
+    select PL031 # RTC
+    select PL050 # keyboard/mouse
+    select PL110 # pl111 LCD controller
+    select PL181 # display
+    select PCI
+    select SMC91C111
 
 config MAINSTONE
     bool
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index ee3acd9..34c8c12 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -21,6 +21,7 @@ config JAZZ_LED
 
 config PL110
     bool
+    select FRAMEBUFFER
 
 config SII9022
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 04/25] hw/arm: Express dependencies of the fsl-imx31 machine with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the fsl-imx31 / kzm machine.
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 3 +--
 hw/arm/Kconfig                  | 5 +++++
 hw/misc/Kconfig                 | 2 ++
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 2033050..19d0ab0 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -8,6 +8,7 @@ CONFIG_PCI_DEVICES=y
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
+CONFIG_FSL_IMX31=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
@@ -68,7 +69,6 @@ CONFIG_TSC210X=y
 CONFIG_BLIZZARD=y
 CONFIG_ONENAND=y
 CONFIG_TUSB6010=y
-CONFIG_IMX=y
 CONFIG_MAINSTONE=y
 CONFIG_MPS2=y
 CONFIG_NSERIES=y
@@ -118,7 +118,6 @@ CONFIG_ALLWINNER_A10_PIC=y
 CONFIG_ALLWINNER_A10=y
 
 CONFIG_FSL_IMX6=y
-CONFIG_FSL_IMX31=y
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
 CONFIG_FSL_IMX6UL=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index c022b8d..3d0ee29 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -103,6 +103,11 @@ config FSL_IMX25
 
 config FSL_IMX31
     bool
+    select SERIAL
+    select IMX
+    select IMX_I2C
+    select LAN9118
+    select PCI
 
 config FSL_IMX6
     bool
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 11d4b30..54ff9a8 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -76,6 +76,8 @@ config ECCMEMCTL
 config IMX
     bool
     select PTIMER
+    select SSI
+    select USB_EHCI_SYSBUS
 
 config STM32F2XX_SYSCFG
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 05/25] hw/arm: Express dependencies of musicpal with Kconfig

[Thomas Huth]

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 6 +-----
 hw/arm/Kconfig                  | 6 ++++++
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 19d0ab0..fe7e306 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -9,13 +9,13 @@ CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
 CONFIG_FSL_IMX31=y
+CONFIG_MUSICPAL=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
 CONFIG_ECC=y
 CONFIG_SERIAL=y
 CONFIG_MAX7310=y
-CONFIG_WM8750=y
 CONFIG_TWL92230=y
 CONFIG_TSC2005=y
 CONFIG_LM832X=y
@@ -38,7 +38,6 @@ CONFIG_IMX_FEC=y
 CONFIG_FTGMAC100=y
 CONFIG_DS1338=y
 CONFIG_PFLASH_CFI01=y
-CONFIG_PFLASH_CFI02=y
 CONFIG_MICRODRIVE=y
 CONFIG_USB_MUSB=y
 CONFIG_PLATFORM_BUS=y
@@ -56,14 +55,12 @@ CONFIG_PL190=y
 CONFIG_PL330=y
 CONFIG_CADENCE=y
 CONFIG_PXA2XX=y
-CONFIG_BITBANG_I2C=y
 CONFIG_FRAMEBUFFER=y
 CONFIG_XILINX_SPIPS=y
 CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_ARM11SCU=y
 CONFIG_DIGIC=y
-CONFIG_MARVELL_88W8618=y
 CONFIG_OMAP=y
 CONFIG_TSC210X=y
 CONFIG_BLIZZARD=y
@@ -140,7 +137,6 @@ CONFIG_XILINX_AXI=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
 
 CONFIG_STRONGARM=y
-CONFIG_MUSICPAL=y
 
 # for realview and versatilepb
 CONFIG_LSI_SCSI_PCI=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 3d0ee29..aeb0cf0 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -48,7 +48,13 @@ config MAINSTONE
 
 config MUSICPAL
     bool
+    select BITBANG_I2C
+    select MARVELL_88W8618
     select PTIMER
+    select PFLASH_CFI02
+    select PCI
+    select SERIAL
+    select WM8750
 
 config NETDUINO2
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 06/25] hw/arm: Express dependencies of the OMAP machines with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the OMAP machines (cheetah, n800, n810,
sx1 and sx1-v1).
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 15 +++------------
 hw/arm/Kconfig                  | 26 ++++++++++++++++++++++++++
 hw/arm/Makefile.objs            |  3 ++-
 3 files changed, 31 insertions(+), 13 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index fe7e306..492db53 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -10,16 +10,15 @@ CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
 CONFIG_FSL_IMX31=y
 CONFIG_MUSICPAL=y
+CONFIG_CHEETAH=y
+CONFIG_SX1=y
+CONFIG_NSERIES=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
 CONFIG_ECC=y
 CONFIG_SERIAL=y
 CONFIG_MAX7310=y
-CONFIG_TWL92230=y
-CONFIG_TSC2005=y
-CONFIG_LM832X=y
-CONFIG_TMP105=y
 CONFIG_TMP421=y
 CONFIG_PCA9552=y
 CONFIG_STELLARIS=y
@@ -37,9 +36,7 @@ CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
 CONFIG_FTGMAC100=y
 CONFIG_DS1338=y
-CONFIG_PFLASH_CFI01=y
 CONFIG_MICRODRIVE=y
-CONFIG_USB_MUSB=y
 CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
@@ -61,14 +58,8 @@ CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_ARM11SCU=y
 CONFIG_DIGIC=y
-CONFIG_OMAP=y
-CONFIG_TSC210X=y
-CONFIG_BLIZZARD=y
-CONFIG_ONENAND=y
-CONFIG_TUSB6010=y
 CONFIG_MAINSTONE=y
 CONFIG_MPS2=y
-CONFIG_NSERIES=y
 CONFIG_RASPI=y
 CONFIG_REALVIEW=y
 CONFIG_ZAURUS=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index aeb0cf0..fe1505e 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -1,6 +1,11 @@
 config ARM_VIRT
     bool
 
+config CHEETAH
+    bool
+    select OMAP
+    select TSC210X
+
 config DIGIC
     bool
     select PTIMER
@@ -61,9 +66,26 @@ config NETDUINO2
 
 config NSERIES
     bool
+    select OMAP
+    select TMP105   # tempature sensor
+    select BLIZZARD # LCD/TV controller
+    select ONENAND
+    select TSC210X  # touchscreen/sensors/audio
+    select TSC2005  # touchscreen/sensors/keypad
+    select LM832X   # GPIO keyboard chip
+    select TWL92230 # energy-management
+    select TUSB6010
 
 config OMAP
     bool
+    select FRAMEBUFFER
+    select I2C
+    select ECC
+    select NAND
+    select PFLASH_CFI01
+    select PCI
+    select SD
+    select SERIAL
 
 config PXA2XX
     bool
@@ -77,6 +99,10 @@ config STELLARIS
 config STRONGARM
     bool
 
+config SX1
+    bool
+    select OMAP
+
 config VERSATILE
     bool
 
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index fa40e8d..b0fd556 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -9,7 +9,8 @@ obj-$(CONFIG_MAINSTONE) += mainstone.o
 obj-$(CONFIG_MUSICPAL) += musicpal.o
 obj-$(CONFIG_NETDUINO2) += netduino2.o
 obj-$(CONFIG_NSERIES) += nseries.o
-obj-$(CONFIG_OMAP) += omap_sx1.o palm.o
+obj-$(CONFIG_SX1) += omap_sx1.o
+obj-$(CONFIG_CHEETAH) += palm.o
 obj-$(CONFIG_PXA2XX) += gumstix.o spitz.o tosa.o z2.o
 obj-$(CONFIG_REALVIEW) += realview.o
 obj-$(CONFIG_STELLARIS) += stellaris.o
-- 
1.8.3.1

[Qemu-devel] [PATCH 07/25] hw/arm: Express dependencies of stellaris with Kconfig

[Thomas Huth]

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  7 +------
 hw/arm/Kconfig                  | 10 ++++++++++
 2 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 492db53..1be49bd 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -13,6 +13,7 @@ CONFIG_MUSICPAL=y
 CONFIG_CHEETAH=y
 CONFIG_SX1=y
 CONFIG_NSERIES=y
+CONFIG_STELLARIS=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
@@ -21,16 +22,10 @@ CONFIG_SERIAL=y
 CONFIG_MAX7310=y
 CONFIG_TMP421=y
 CONFIG_PCA9552=y
-CONFIG_STELLARIS=y
-CONFIG_STELLARIS_INPUT=y
-CONFIG_STELLARIS_ENET=y
-CONFIG_SSD0303=y
-CONFIG_SSD0323=y
 CONFIG_DDC=y
 CONFIG_SII9022=y
 CONFIG_ADS7846=y
 CONFIG_MAX111X=y
-CONFIG_SSI_SD=y
 CONFIG_SSI_M25P80=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index fe1505e..3034252 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -95,6 +95,16 @@ config REALVIEW
 
 config STELLARIS
     bool
+    select ARM_V7M
+    select I2C
+    select PL011 # UART
+    select PL022 # Serial port
+    select PL061 # GPIO
+    select SSD0303 # OLED display
+    select SSD0323 # OLED display
+    select SSI_SD
+    select STELLARIS_INPUT
+    select STELLARIS_ENET # ethernet
 
 config STRONGARM
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 08/25] hw/arm: Express dependencies of realview, versatile and vexpress with Kconfig

[Thomas Huth]

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 23 +++-----------------
 hw/arm/Kconfig                  | 47 +++++++++++++++++++++++++++++++++++++++++
 hw/arm/Makefile.objs            |  3 ++-
 hw/display/Kconfig              |  1 +
 hw/i2c/Kconfig                  |  2 +-
 5 files changed, 54 insertions(+), 22 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 1be49bd..2bac13b 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -3,8 +3,6 @@
 # TODO: ARM_V7M is currently always required - make this more flexible!
 CONFIG_ARM_V7M=y
 
-CONFIG_PCI_DEVICES=y
-
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
@@ -14,6 +12,9 @@ CONFIG_CHEETAH=y
 CONFIG_SX1=y
 CONFIG_NSERIES=y
 CONFIG_STELLARIS=y
+CONFIG_REALVIEW=y
+CONFIG_VERSATILE=y
+CONFIG_VEXPRESS=y
 
 CONFIG_VGA=y
 CONFIG_NAND=y
@@ -22,8 +23,6 @@ CONFIG_SERIAL=y
 CONFIG_MAX7310=y
 CONFIG_TMP421=y
 CONFIG_PCA9552=y
-CONFIG_DDC=y
-CONFIG_SII9022=y
 CONFIG_ADS7846=y
 CONFIG_MAX111X=y
 CONFIG_SSI_M25P80=y
@@ -35,15 +34,8 @@ CONFIG_MICRODRIVE=y
 CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
-CONFIG_ARM11MPCORE=y
-CONFIG_A9MPCORE=y
-CONFIG_A15MPCORE=y
-
 CONFIG_NETDUINO2=y
 
-CONFIG_PL041=y
-CONFIG_PL080=y
-CONFIG_PL190=y
 CONFIG_PL330=y
 CONFIG_CADENCE=y
 CONFIG_PXA2XX=y
@@ -51,12 +43,10 @@ CONFIG_FRAMEBUFFER=y
 CONFIG_XILINX_SPIPS=y
 CONFIG_ZYNQ_DEVCFG=y
 
-CONFIG_ARM11SCU=y
 CONFIG_DIGIC=y
 CONFIG_MAINSTONE=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
-CONFIG_REALVIEW=y
 CONFIG_ZAURUS=y
 CONFIG_ZYNQ=y
 CONFIG_STM32F2XX_TIMER=y
@@ -84,10 +74,6 @@ CONFIG_IOTKIT_SYSCTL=y
 CONFIG_IOTKIT_SYSINFO=y
 CONFIG_ARMSSE_CPUID=y
 
-CONFIG_VERSATILE=y
-CONFIG_VERSATILE_PCI=y
-CONFIG_VERSATILE_I2C=y
-
 CONFIG_PCI_EXPRESS=y
 CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
 CONFIG_VFIO_PLATFORM=y
@@ -123,6 +109,3 @@ CONFIG_XILINX_AXI=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
 
 CONFIG_STRONGARM=y
-
-# for realview and versatilepb
-CONFIG_LSI_SCSI_PCI=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 3034252..b76fd7c 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -92,6 +92,29 @@ config PXA2XX
 
 config REALVIEW
     bool
+    imply PCI_DEVICES
+    select SMC91C111
+    select LAN9118
+    select A9MPCORE
+    select A15MPCORE
+    select ARM11MPCORE
+    select ARM_TIMER
+    select VERSATILE_PCI
+    select WM8750 # audio codec
+    select LSI_SCSI_PCI
+    select PCI
+    select PL011  # UART
+    select PL031  # RTC
+    select PL041  # audio codec
+    select PL050  # keyboard/mouse
+    select PL061  # GPIO
+    select PL080  # DMA controller
+    select PL110
+    select PL181  # display
+    select PL310  # cache controller
+    select VERSATILE_I2C
+    select DS1338 # I2C RTC+NVRAM
+    select USB_OHCI
 
 config STELLARIS
     bool
@@ -115,6 +138,29 @@ config SX1
 
 config VERSATILE
     bool
+    select ARM_TIMER # sp804
+    select PFLASH_CFI01
+    select LSI_SCSI_PCI
+    select PL050  # keyboard/mouse
+    select PL080  # DMA controller
+    select PL190  # Vector PIC
+    select REALVIEW
+    select USB_OHCI
+
+config VEXPRESS
+    bool
+    select A9MPCORE
+    select A15MPCORE
+    select ARM_MPTIMER
+    select ARM_TIMER # sp804
+    select LAN9118
+    select PFLASH_CFI01
+    select PL011 # UART
+    select PL041 # audio codec
+    select PL181  # display
+    select REALVIEW
+    select SII9022
+    select VIRTIO_MMIO
 
 config ZYNQ
     bool
@@ -194,6 +240,7 @@ config A15MPCORE
 
 config ARM11MPCORE
     bool
+    select ARM11SCU
 
 config ARMSSE
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index b0fd556..420641e 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -15,7 +15,8 @@ obj-$(CONFIG_PXA2XX) += gumstix.o spitz.o tosa.o z2.o
 obj-$(CONFIG_REALVIEW) += realview.o
 obj-$(CONFIG_STELLARIS) += stellaris.o
 obj-$(CONFIG_STRONGARM) += collie.o
-obj-$(CONFIG_VERSATILE) += vexpress.o versatilepb.o
+obj-$(CONFIG_VERSATILE) += versatilepb.o
+obj-$(CONFIG_VEXPRESS) += vexpress.o
 obj-$(CONFIG_ZYNQ) += xilinx_zynq.o
 
 obj-$(CONFIG_ARM_V7M) += armv7m.o
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index 34c8c12..a5f3fc0 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -26,6 +26,7 @@ config PL110
 config SII9022
     bool
     depends on I2C
+    select DDC
 
 config SSD0303
     bool
diff --git a/hw/i2c/Kconfig b/hw/i2c/Kconfig
index ef1caa6..0004893 100644
--- a/hw/i2c/Kconfig
+++ b/hw/i2c/Kconfig
@@ -12,7 +12,7 @@ config DDC
 
 config VERSATILE_I2C
     bool
-    select I2C
+    select BITBANG_I2C
 
 config ACPI_SMBUS
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 09/25] hw/arm: Express dependencies of the PXA2xx machines with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the PXA2xx machines (akita, borzoi,
connex and verdex gumstix, tosa, mainstone, spitz, terrier and z2).
This patch is based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 17 +++++----------
 hw/arm/Kconfig                  | 46 +++++++++++++++++++++++++++++++++++++++++
 hw/arm/Makefile.objs            |  5 ++++-
 3 files changed, 55 insertions(+), 13 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 2bac13b..1db76f6 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -15,22 +15,20 @@ CONFIG_STELLARIS=y
 CONFIG_REALVIEW=y
 CONFIG_VERSATILE=y
 CONFIG_VEXPRESS=y
+CONFIG_MAINSTONE=y
+CONFIG_GUMSTIX=y
+CONFIG_SPITZ=y
+CONFIG_TOSA=y
+CONFIG_Z2=y
 
 CONFIG_VGA=y
-CONFIG_NAND=y
-CONFIG_ECC=y
-CONFIG_SERIAL=y
-CONFIG_MAX7310=y
 CONFIG_TMP421=y
 CONFIG_PCA9552=y
-CONFIG_ADS7846=y
-CONFIG_MAX111X=y
 CONFIG_SSI_M25P80=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
 CONFIG_FTGMAC100=y
 CONFIG_DS1338=y
-CONFIG_MICRODRIVE=y
 CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
@@ -38,16 +36,13 @@ CONFIG_NETDUINO2=y
 
 CONFIG_PL330=y
 CONFIG_CADENCE=y
-CONFIG_PXA2XX=y
 CONFIG_FRAMEBUFFER=y
 CONFIG_XILINX_SPIPS=y
 CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_DIGIC=y
-CONFIG_MAINSTONE=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
-CONFIG_ZAURUS=y
 CONFIG_ZYNQ=y
 CONFIG_STM32F2XX_TIMER=y
 CONFIG_STM32F2XX_USART=y
@@ -80,8 +75,6 @@ CONFIG_VFIO_PLATFORM=y
 CONFIG_VFIO_XGMAC=y
 CONFIG_VFIO_AMD_XGBE=y
 
-CONFIG_SDHCI=y
-
 CONFIG_ALLWINNER_A10_PIT=y
 CONFIG_ALLWINNER_A10_PIC=y
 CONFIG_ALLWINNER_A10=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index b76fd7c..95f2713 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -89,6 +89,50 @@ config OMAP
 
 config PXA2XX
     bool
+    select FRAMEBUFFER
+    select I2C
+    select PCI
+    select SERIAL
+    select SD
+    select SSI
+    select USB_OHCI
+
+config GUMSTIX
+    bool
+    select PFLASH_CFI01
+    select SMC91C111
+    select PXA2XX
+
+config TOSA
+    bool
+    select ZAURUS  # scoop
+    select MICRODRIVE
+    select PXA2XX
+
+config MAINSTONE
+    bool
+    select PXA2XX
+    select PFLASH_CFI01
+    select SMC91C111
+
+config SPITZ
+    bool
+    select ADS7846 # display
+    select MAX111X # A/D converter
+    select WM8750  # audio codec
+    select MAX7310 # GPIO expander
+    select ZAURUS  # scoop
+    select NAND    # memory
+    select ECC     # Error-correcting for NAND
+    select MICRODRIVE
+    select PXA2XX
+
+config Z2
+    bool
+    select PFLASH_CFI01
+    select WM8750
+    select PL011 # UART
+    select PXA2XX
 
 config REALVIEW
     bool
@@ -227,6 +271,8 @@ config MSF2
 
 config ZAURUS
     bool
+    select NAND
+    select ECC
 
 config A9MPCORE
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 420641e..93e1160 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -11,7 +11,10 @@ obj-$(CONFIG_NETDUINO2) += netduino2.o
 obj-$(CONFIG_NSERIES) += nseries.o
 obj-$(CONFIG_SX1) += omap_sx1.o
 obj-$(CONFIG_CHEETAH) += palm.o
-obj-$(CONFIG_PXA2XX) += gumstix.o spitz.o tosa.o z2.o
+obj-$(CONFIG_GUMSTIX) += gumstix.o
+obj-$(CONFIG_SPITZ) += spitz.o
+obj-$(CONFIG_TOSA) += tosa.o
+obj-$(CONFIG_Z2) += z2.o
 obj-$(CONFIG_REALVIEW) += realview.o
 obj-$(CONFIG_STELLARIS) += stellaris.o
 obj-$(CONFIG_STRONGARM) += collie.o
-- 
1.8.3.1

[Qemu-devel] [PATCH 10/25] hw/arm: Express dependencies of xilinx-zynq with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the xilinx-zynq-a9 board.
This patch is based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  7 +------
 hw/arm/Kconfig                  | 14 ++++++++++++++
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 1db76f6..5c43bb3 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -15,6 +15,7 @@ CONFIG_STELLARIS=y
 CONFIG_REALVIEW=y
 CONFIG_VERSATILE=y
 CONFIG_VEXPRESS=y
+CONFIG_ZYNQ=y
 CONFIG_MAINSTONE=y
 CONFIG_GUMSTIX=y
 CONFIG_SPITZ=y
@@ -34,16 +35,11 @@ CONFIG_VIRTIO_MMIO=y
 
 CONFIG_NETDUINO2=y
 
-CONFIG_PL330=y
-CONFIG_CADENCE=y
 CONFIG_FRAMEBUFFER=y
-CONFIG_XILINX_SPIPS=y
-CONFIG_ZYNQ_DEVCFG=y
 
 CONFIG_DIGIC=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
-CONFIG_ZYNQ=y
 CONFIG_STM32F2XX_TIMER=y
 CONFIG_STM32F2XX_USART=y
 CONFIG_STM32F2XX_SYSCFG=y
@@ -98,7 +94,6 @@ CONFIG_SMBUS_EEPROM=y
 CONFIG_GPIO_KEY=y
 CONFIG_MSF2=y
 CONFIG_FW_CFG_DMA=y
-CONFIG_XILINX_AXI=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
 
 CONFIG_STRONGARM=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 95f2713..67f1228 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -208,6 +208,20 @@ config VEXPRESS
 
 config ZYNQ
     bool
+    select A9MPCORE
+    select CADENCE # UART
+    select PCI
+    select PFLASH_CFI02
+    select PL330
+    select SDHCI
+    select SSI_M25P80
+    select USB_EHCI
+    select USB_EHCI_SYSBUS
+    select XILINX # UART
+    select XILINX_AXI
+    select XILINX_SPI
+    select XILINX_SPIPS
+    select ZYNQ_DEVCFG
 
 config ARM_V7M
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 11/25] hw/arm: Express dependencies of collie with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the Strongarm collie machine.
This patch is based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 3 +--
 hw/arm/Kconfig                  | 7 +++++++
 hw/arm/Makefile.objs            | 2 +-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 5c43bb3..9851068 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -21,6 +21,7 @@ CONFIG_GUMSTIX=y
 CONFIG_SPITZ=y
 CONFIG_TOSA=y
 CONFIG_Z2=y
+CONFIG_COLLIE=y
 
 CONFIG_VGA=y
 CONFIG_TMP421=y
@@ -95,5 +96,3 @@ CONFIG_GPIO_KEY=y
 CONFIG_MSF2=y
 CONFIG_FW_CFG_DMA=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
-
-CONFIG_STRONGARM=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 67f1228..39cbda9 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -175,6 +175,13 @@ config STELLARIS
 
 config STRONGARM
     bool
+    select PXA2XX
+
+config COLLIE
+    bool
+    select PFLASH_CFI01
+    select ZAURUS  # scoop
+    select STRONGARM
 
 config SX1
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 93e1160..053fcb6 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -17,7 +17,7 @@ obj-$(CONFIG_TOSA) += tosa.o
 obj-$(CONFIG_Z2) += z2.o
 obj-$(CONFIG_REALVIEW) += realview.o
 obj-$(CONFIG_STELLARIS) += stellaris.o
-obj-$(CONFIG_STRONGARM) += collie.o
+obj-$(CONFIG_COLLIE) += collie.o
 obj-$(CONFIG_VERSATILE) += versatilepb.o
 obj-$(CONFIG_VEXPRESS) += vexpress.o
 obj-$(CONFIG_ZYNQ) += xilinx_zynq.o
-- 
1.8.3.1

[Qemu-devel] [PATCH 12/25] hw/arm: Express dependencies of the aspeed boards with Kconfig

[Thomas Huth]

Dependencies have been determined by looking at hw/arm/aspeed.c

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  7 +------
 hw/arm/Kconfig                  | 10 ++++++++++
 2 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 9851068..b2e31b3 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -22,15 +22,12 @@ CONFIG_SPITZ=y
 CONFIG_TOSA=y
 CONFIG_Z2=y
 CONFIG_COLLIE=y
+CONFIG_ASPEED_SOC=y
 
 CONFIG_VGA=y
-CONFIG_TMP421=y
-CONFIG_PCA9552=y
 CONFIG_SSI_M25P80=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
-CONFIG_FTGMAC100=y
-CONFIG_DS1338=y
 CONFIG_PLATFORM_BUS=y
 CONFIG_VIRTIO_MMIO=y
 
@@ -90,8 +87,6 @@ CONFIG_I82801B11=y
 CONFIG_ACPI=y
 CONFIG_ARM_VIRT=y
 CONFIG_SMBIOS=y
-CONFIG_ASPEED_SOC=y
-CONFIG_SMBUS_EEPROM=y
 CONFIG_GPIO_KEY=y
 CONFIG_MSF2=y
 CONFIG_FW_CFG_DMA=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 39cbda9..a4fe2c8 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -267,6 +267,16 @@ config FSL_IMX6
 
 config ASPEED_SOC
     bool
+    select DS1338
+    select FTGMAC100
+    select I2C
+    select PCA9552
+    select SERIAL
+    select SMBUS_EEPROM
+    select SSI
+    select SSI_M25P80
+    select TMP105
+    select TMP421
 
 config MPS2
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 13/25] hw/arm: Express dependencies of the virt machine with Kconfig

[Thomas Huth]

Dependencies have been determined by looking at hw/arm/virt.c

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 14 +-------------
 hw/arm/Kconfig                  | 19 +++++++++++++++++++
 hw/arm/Makefile.objs            |  3 ++-
 3 files changed, 22 insertions(+), 14 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index b2e31b3..9db6808 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -3,6 +3,7 @@
 # TODO: ARM_V7M is currently always required - make this more flexible!
 CONFIG_ARM_V7M=y
 
+CONFIG_ARM_VIRT=y
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
@@ -28,8 +29,6 @@ CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
-CONFIG_PLATFORM_BUS=y
-CONFIG_VIRTIO_MMIO=y
 
 CONFIG_NETDUINO2=y
 
@@ -63,12 +62,6 @@ CONFIG_IOTKIT_SYSCTL=y
 CONFIG_IOTKIT_SYSINFO=y
 CONFIG_ARMSSE_CPUID=y
 
-CONFIG_PCI_EXPRESS=y
-CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
-CONFIG_VFIO_PLATFORM=y
-CONFIG_VFIO_XGMAC=y
-CONFIG_VFIO_AMD_XGBE=y
-
 CONFIG_ALLWINNER_A10_PIT=y
 CONFIG_ALLWINNER_A10_PIC=y
 CONFIG_ALLWINNER_A10=y
@@ -84,10 +77,5 @@ CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
 CONFIG_I82801B11=y
-CONFIG_ACPI=y
-CONFIG_ARM_VIRT=y
-CONFIG_SMBIOS=y
-CONFIG_GPIO_KEY=y
 CONFIG_MSF2=y
-CONFIG_FW_CFG_DMA=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index a4fe2c8..3d580fa 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -1,5 +1,23 @@
 config ARM_VIRT
     bool
+    imply PCI_DEVICES
+    imply VFIO_AMD_XGBE
+    imply VFIO_XGMAC
+    select A15MPCORE
+    select ACPI
+    select ARM_SMMUV3
+    select GPIO_KEY
+    select FW_CFG_DMA
+    select PCI_EXPRESS
+    select PCI_EXPRESS_GENERIC_BRIDGE
+    select PFLASH_CFI01
+    select PL011 # UART
+    select PL031 # RTC
+    select PL061 # GPIO
+    select PLATFORM_BUS
+    select SMBIOS
+    select VIRTIO_MMIO
+    select VFIO_PLATFORM
 
 config CHEETAH
     bool
@@ -314,6 +332,7 @@ config A9MPCORE
 
 config A15MPCORE
     bool
+    select ARM_GIC
 
 config ARM11MPCORE
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 053fcb6..f17187f 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -1,4 +1,5 @@
-obj-y += boot.o sysbus-fdt.o
+obj-y += boot.o
+obj-$(CONFIG_PLATFORM_BUS) += sysbus-fdt.o
 obj-$(CONFIG_ARM_VIRT) += virt.o
 obj-$(CONFIG_ACPI) += virt-acpi-build.o
 obj-$(CONFIG_DIGIC) += digic_boards.o
-- 
1.8.3.1

[Qemu-devel] [PATCH 14/25] hw/arm: Express dependencies of netduino / stm32f2xx with Kconfig

[Thomas Huth]

Netduino only depends on the stm32f205 SoC which in turn depends on
its components.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 9 +--------
 hw/arm/Kconfig                  | 7 +++++++
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 9db6808..3279fb5 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -24,25 +24,18 @@ CONFIG_TOSA=y
 CONFIG_Z2=y
 CONFIG_COLLIE=y
 CONFIG_ASPEED_SOC=y
+CONFIG_NETDUINO2=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
 CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
 
-CONFIG_NETDUINO2=y
-
 CONFIG_FRAMEBUFFER=y
 
 CONFIG_DIGIC=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
-CONFIG_STM32F2XX_TIMER=y
-CONFIG_STM32F2XX_USART=y
-CONFIG_STM32F2XX_SYSCFG=y
-CONFIG_STM32F2XX_ADC=y
-CONFIG_STM32F2XX_SPI=y
-CONFIG_STM32F205_SOC=y
 CONFIG_NRF51_SOC=y
 
 CONFIG_CMSDK_APB_TIMER=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 3d580fa..5d7dafb 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -81,6 +81,7 @@ config MUSICPAL
 
 config NETDUINO2
     bool
+    select STM32F205_SOC
 
 config NSERIES
     bool
@@ -262,6 +263,12 @@ config RASPI
 
 config STM32F205_SOC
     bool
+    select ARM_V7M
+    select STM32F2XX_TIMER
+    select STM32F2XX_USART
+    select STM32F2XX_SYSCFG
+    select STM32F2XX_ADC
+    select STM32F2XX_SPI
 
 config XLNX_ZYNQMP_ARM
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 15/25] hw/arm: Express dependencies of allwinner / cubieboard with Kconfig

[Thomas Huth]

Add dependencies for the Cubitech Cubieboard.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  6 +-----
 hw/arm/Kconfig                  | 10 ++++++++++
 2 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 3279fb5..28bb37f 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -4,6 +4,7 @@
 CONFIG_ARM_V7M=y
 
 CONFIG_ARM_VIRT=y
+CONFIG_CUBIEBOARD=y
 CONFIG_EXYNOS4=y
 CONFIG_HIGHBANK=y
 CONFIG_INTEGRATOR=y
@@ -28,7 +29,6 @@ CONFIG_NETDUINO2=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
-CONFIG_ALLWINNER_EMAC=y
 CONFIG_IMX_FEC=y
 
 CONFIG_FRAMEBUFFER=y
@@ -55,10 +55,6 @@ CONFIG_IOTKIT_SYSCTL=y
 CONFIG_IOTKIT_SYSINFO=y
 CONFIG_ARMSSE_CPUID=y
 
-CONFIG_ALLWINNER_A10_PIT=y
-CONFIG_ALLWINNER_A10_PIC=y
-CONFIG_ALLWINNER_A10=y
-
 CONFIG_FSL_IMX6=y
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 5d7dafb..3621d44 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -24,6 +24,10 @@ config CHEETAH
     select OMAP
     select TSC210X
 
+config CUBIEBOARD
+    bool
+    select ALLWINNER_A10
+
 config DIGIC
     bool
     select PTIMER
@@ -257,6 +261,12 @@ config EXYNOS4
 
 config ALLWINNER_A10
     bool
+    select AHCI
+    select PCI          # TODO: Currently required for AHCI, remove this later
+    select ALLWINNER_A10_PIT
+    select ALLWINNER_A10_PIC
+    select ALLWINNER_EMAC
+    select SERIAL
 
 config RASPI
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 16/25] hw/arm: Express dependencies of the MPS2 boards with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the mps2-an* machines.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 19 +------------------
 hw/arm/Kconfig                  | 17 +++++++++++++++++
 2 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 28bb37f..b530a06 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -26,6 +26,7 @@ CONFIG_Z2=y
 CONFIG_COLLIE=y
 CONFIG_ASPEED_SOC=y
 CONFIG_NETDUINO2=y
+CONFIG_MPS2=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
@@ -34,27 +35,9 @@ CONFIG_IMX_FEC=y
 CONFIG_FRAMEBUFFER=y
 
 CONFIG_DIGIC=y
-CONFIG_MPS2=y
 CONFIG_RASPI=y
 CONFIG_NRF51_SOC=y
 
-CONFIG_CMSDK_APB_TIMER=y
-CONFIG_CMSDK_APB_DUALTIMER=y
-CONFIG_CMSDK_APB_UART=y
-CONFIG_CMSDK_APB_WATCHDOG=y
-
-CONFIG_MPS2_FPGAIO=y
-CONFIG_MPS2_SCC=y
-
-CONFIG_TZ_MPC=y
-CONFIG_TZ_MSC=y
-CONFIG_TZ_PPC=y
-CONFIG_ARMSSE=y
-CONFIG_IOTKIT_SECCTL=y
-CONFIG_IOTKIT_SYSCTL=y
-CONFIG_IOTKIT_SYSINFO=y
-CONFIG_ARMSSE_CPUID=y
-
 CONFIG_FSL_IMX6=y
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 3621d44..5765fe9 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -315,6 +315,23 @@ config ASPEED_SOC
 
 config MPS2
     bool
+    select ARMSSE
+    select ARMSSE_CPUID
+    select CMSDK_APB_TIMER
+    select CMSDK_APB_DUALTIMER
+    select CMSDK_APB_UART
+    select CMSDK_APB_WATCHDOG
+    select IOTKIT_SECCTL
+    select IOTKIT_SYSCTL
+    select IOTKIT_SYSINFO
+    select LAN9118
+    select MPS2_FPGAIO
+    select MPS2_SCC
+    select PL022    # Serial port
+    select PL080    # DMA controller
+    select TZ_MPC
+    select TZ_MSC
+    select TZ_PPC
 
 config IOTKIT
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 17/25] hw/arm: Express dependencies of the raspi machines with Kconfig

[Thomas Huth]

Most of the code is directly controlled by the CONFIG_RASPI switch,
so not much to add here additionally.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 4 +---
 hw/arm/Kconfig                  | 4 ++++
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index b530a06..6605786 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -27,15 +27,13 @@ CONFIG_COLLIE=y
 CONFIG_ASPEED_SOC=y
 CONFIG_NETDUINO2=y
 CONFIG_MPS2=y
+CONFIG_RASPI=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
 CONFIG_IMX_FEC=y
 
-CONFIG_FRAMEBUFFER=y
-
 CONFIG_DIGIC=y
-CONFIG_RASPI=y
 CONFIG_NRF51_SOC=y
 
 CONFIG_FSL_IMX6=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 5765fe9..6b1522f 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -270,6 +270,10 @@ config ALLWINNER_A10
 
 config RASPI
     bool
+    select FRAMEBUFFER
+    select PL011 # UART
+    select SDHCI
+    select PCI          # TODO: Currently required for SDHCI, remove this later
 
 config STM32F205_SOC
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 18/25] hw/arm: Express dependencies of canon-a1100 with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the DIGIC / canon-a1100 machine.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 2 +-
 hw/arm/Kconfig                  | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 6605786..20fcbcb 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -28,12 +28,12 @@ CONFIG_ASPEED_SOC=y
 CONFIG_NETDUINO2=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
+CONFIG_DIGIC=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
 CONFIG_IMX_FEC=y
 
-CONFIG_DIGIC=y
 CONFIG_NRF51_SOC=y
 
 CONFIG_FSL_IMX6=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 6b1522f..617a460 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -31,6 +31,7 @@ config CUBIEBOARD
 config DIGIC
     bool
     select PTIMER
+    select PFLASH_CFI02
 
 config EXYNOS4
     bool
-- 
1.8.3.1

Re: [Qemu-devel] [PATCH 18/25] hw/arm: Express dependencies of canon-a1100 with Kconfig

[Philippe Mathieu-Daudé]

On 2/9/19 7:39 AM, Thomas Huth wrote:
> Add Kconfig dependencies for the DIGIC / canon-a1100 machine.
> 
> Signed-off-by: Thomas Huth <thuth@redhat.com>

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

> ---
>  default-configs/arm-softmmu.mak | 2 +-
>  hw/arm/Kconfig                  | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 6605786..20fcbcb 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -28,12 +28,12 @@ CONFIG_ASPEED_SOC=y
>  CONFIG_NETDUINO2=y
>  CONFIG_MPS2=y
>  CONFIG_RASPI=y
> +CONFIG_DIGIC=y
>  
>  CONFIG_VGA=y
>  CONFIG_SSI_M25P80=y
>  CONFIG_IMX_FEC=y
>  
> -CONFIG_DIGIC=y
>  CONFIG_NRF51_SOC=y
>  
>  CONFIG_FSL_IMX6=y
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index 6b1522f..617a460 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -31,6 +31,7 @@ config CUBIEBOARD
>  config DIGIC
>      bool
>      select PTIMER
> +    select PFLASH_CFI02
>  
>  config EXYNOS4
>      bool
> 

[Qemu-devel] [PATCH 19/25] hw/arm: Express dependencies of sabrelite with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the Sabrelite / iMX6 machine.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 4 +---
 hw/arm/Kconfig                  | 7 +++++++
 hw/arm/Makefile.objs            | 3 ++-
 3 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 20fcbcb..f6193b1 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -29,6 +29,7 @@ CONFIG_NETDUINO2=y
 CONFIG_MPS2=y
 CONFIG_RASPI=y
 CONFIG_DIGIC=y
+CONFIG_SABRELITE=y
 
 CONFIG_VGA=y
 CONFIG_SSI_M25P80=y
@@ -36,13 +37,10 @@ CONFIG_IMX_FEC=y
 
 CONFIG_NRF51_SOC=y
 
-CONFIG_FSL_IMX6=y
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
 CONFIG_FSL_IMX6UL=y
 
-CONFIG_IMX_I2C=y
-
 CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 617a460..d98d39e 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -184,6 +184,10 @@ config REALVIEW
     select DS1338 # I2C RTC+NVRAM
     select USB_OHCI
 
+config SABRELITE
+    bool
+    select FSL_IMX6
+
 config STELLARIS
     bool
     select ARM_V7M
@@ -304,6 +308,9 @@ config FSL_IMX31
 
 config FSL_IMX6
     bool
+    select A9MPCORE
+    select IMX
+    select IMX_I2C
 
 config ASPEED_SOC
     bool
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index f17187f..ee9f5c6 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -22,6 +22,7 @@ obj-$(CONFIG_COLLIE) += collie.o
 obj-$(CONFIG_VERSATILE) += versatilepb.o
 obj-$(CONFIG_VEXPRESS) += vexpress.o
 obj-$(CONFIG_ZYNQ) += xilinx_zynq.o
+obj-$(CONFIG_SABRELITE) += sabrelite.o
 
 obj-$(CONFIG_ARM_V7M) += armv7m.o
 obj-$(CONFIG_EXYNOS4) += exynos4210.o
@@ -36,7 +37,7 @@ obj-$(CONFIG_XLNX_ZYNQMP_ARM) += xlnx-zynqmp.o xlnx-zcu102.o
 obj-$(CONFIG_XLNX_VERSAL) += xlnx-versal.o xlnx-versal-virt.o
 obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
 obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
-obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o
+obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o
 obj-$(CONFIG_ASPEED_SOC) += aspeed_soc.o aspeed.o
 obj-$(CONFIG_MPS2) += mps2.o
 obj-$(CONFIG_MPS2) += mps2-tz.o
-- 
1.8.3.1

[Qemu-devel] [PATCH 20/25] hw/arm: Express dependencies of the MSF2 machine with Kconfig

[Thomas Huth]

Add Kconfig dependencies for the emcraft-sf2 machine.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 3 +--
 hw/arm/Kconfig                  | 4 ++++
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index f6193b1..729e4b8 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -30,9 +30,9 @@ CONFIG_MPS2=y
 CONFIG_RASPI=y
 CONFIG_DIGIC=y
 CONFIG_SABRELITE=y
+CONFIG_MSF2=y
 
 CONFIG_VGA=y
-CONFIG_SSI_M25P80=y
 CONFIG_IMX_FEC=y
 
 CONFIG_NRF51_SOC=y
@@ -45,5 +45,4 @@ CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
 CONFIG_I82801B11=y
-CONFIG_MSF2=y
 CONFIG_PCI_EXPRESS_DESIGNWARE=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index d98d39e..7823a16 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -362,7 +362,11 @@ config NRF51_SOC
 
 config MSF2
     bool
+    select ARM_V7M
     select PTIMER
+    select SERIAL
+    select SSI
+    select SSI_M25P80
 
 config ZAURUS
     bool
-- 
1.8.3.1

Re: [Qemu-devel] [PATCH 20/25] hw/arm: Express dependencies of the MSF2 machine with Kconfig

[Philippe Mathieu-Daudé]

Hi Thomas,

On 2/9/19 7:39 AM, Thomas Huth wrote:
> Add Kconfig dependencies for the emcraft-sf2 machine.
> 
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
>  default-configs/arm-softmmu.mak | 3 +--
>  hw/arm/Kconfig                  | 4 ++++
>  2 files changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index f6193b1..729e4b8 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -30,9 +30,9 @@ CONFIG_MPS2=y
>  CONFIG_RASPI=y
>  CONFIG_DIGIC=y
>  CONFIG_SABRELITE=y
> +CONFIG_MSF2=y
>  
>  CONFIG_VGA=y
> -CONFIG_SSI_M25P80=y
>  CONFIG_IMX_FEC=y
>  
>  CONFIG_NRF51_SOC=y
> @@ -45,5 +45,4 @@ CONFIG_PCIE_PORT=y
>  CONFIG_XIO3130=y
>  CONFIG_IOH3420=y
>  CONFIG_I82801B11=y
> -CONFIG_MSF2=y
>  CONFIG_PCI_EXPRESS_DESIGNWARE=y
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index d98d39e..7823a16 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -362,7 +362,11 @@ config NRF51_SOC
>  

I'd split the SoC:

>  config MSF2
>      bool
> +    select ARM_V7M
>      select PTIMER
> +    select SERIAL
> +    select SSI

from the board, moving SSI_M25P80 to:

config EMCRAFT_SF2
    bool
    select MSF2
    select SSI_M25P80

>  
>  config ZAURUS
>      bool
> 

[Qemu-devel] [PATCH 21/25] hw/arm: Express dependencies for remaining IMX boards with Kconfig

[Thomas Huth]

IMX25, IMX7 and IMX6UL were still missing the Kconfig dependencies.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak |  2 --
 hw/arm/Kconfig                  | 20 ++++++++++++++++++++
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 729e4b8..e0d1a00 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -33,7 +33,6 @@ CONFIG_SABRELITE=y
 CONFIG_MSF2=y
 
 CONFIG_VGA=y
-CONFIG_IMX_FEC=y
 
 CONFIG_NRF51_SOC=y
 
@@ -45,4 +44,3 @@ CONFIG_PCIE_PORT=y
 CONFIG_XIO3130=y
 CONFIG_IOH3420=y
 CONFIG_I82801B11=y
-CONFIG_PCI_EXPRESS_DESIGNWARE=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 7823a16..c4b3cd2 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -297,6 +297,10 @@ config XLNX_VERSAL
 
 config FSL_IMX25
     bool
+    select IMX
+    select IMX_FEC
+    select IMX_I2C
+    select DS1338
 
 config FSL_IMX31
     bool
@@ -311,6 +315,8 @@ config FSL_IMX6
     select A9MPCORE
     select IMX
     select IMX_I2C
+    select SDHCI
+    select PCI          # TODO: Currently required for SDHCI, remove this later
 
 config ASPEED_SOC
     bool
@@ -350,12 +356,26 @@ config IOTKIT
 
 config FSL_IMX7
     bool
+    imply PCI_DEVICES
+    select A15MPCORE
+    select PCI
+    select IMX
+    select IMX_FEC
+    select IMX_I2C
+    select PCI_EXPRESS_DESIGNWARE
+    select SDHCI
 
 config ARM_SMMUV3
     bool
 
 config FSL_IMX6UL
     bool
+    select A15MPCORE
+    select IMX
+    select IMX_FEC
+    select IMX_I2C
+    select SDHCI
+    select PCI          # TODO: Currently required for SDHCI, remove this later
 
 config NRF51_SOC
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 22/25] hw/arm: Express dependencies of nrf51 Kconfig

[Thomas Huth]

Add Kconfig dependencies for the NRF51 / microbit machine.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/arm/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index c4b3cd2..aad2dd3 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -379,6 +379,8 @@ config FSL_IMX6UL
 
 config NRF51_SOC
     bool
+    select I2C
+    select ARM_V7M
 
 config MSF2
     bool
-- 
1.8.3.1

Re: [Qemu-devel] [PATCH 22/25] hw/arm: Express dependencies of nrf51 Kconfig

[Philippe Mathieu-Daudé]

Hi Thomas,

On 2/9/19 7:39 AM, Thomas Huth wrote:
> Add Kconfig dependencies for the NRF51 / microbit machine.
> 
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
>  hw/arm/Kconfig | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index c4b3cd2..aad2dd3 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -379,6 +379,8 @@ config FSL_IMX6UL
>  
>  config NRF51_SOC
>      bool
> +    select I2C
> +    select ARM_V7M

Don't we need a microbit config too?

config MICROBIT
    bool
    select NRF51_SOC

>  
>  config MSF2
>      bool
> 

Re: [Qemu-devel] [PATCH 22/25] hw/arm: Express dependencies of nrf51 Kconfig

[Thomas Huth]

On 2019-02-11 18:37, Philippe Mathieu-Daudé wrote:
> Hi Thomas,
> 
> On 2/9/19 7:39 AM, Thomas Huth wrote:
>> Add Kconfig dependencies for the NRF51 / microbit machine.
>>
>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>> ---
>>  hw/arm/Kconfig | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
>> index c4b3cd2..aad2dd3 100644
>> --- a/hw/arm/Kconfig
>> +++ b/hw/arm/Kconfig
>> @@ -379,6 +379,8 @@ config FSL_IMX6UL
>>  
>>  config NRF51_SOC
>>      bool
>> +    select I2C
>> +    select ARM_V7M
> 
> Don't we need a microbit config too?

As long as we do not have another board that uses the NRF51-SoC, it does
not matter that much ... but yes, it's likely cleaner to have a proper
switch for the machine right from the start. I'll fix it in v2 ...

 Thomas

[Qemu-devel] [PATCH 23/25] hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig

[Thomas Huth]

This cleans up most settings in default-configs/aarch64-softmmu.mak.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/aarch64-softmmu.mak |  4 ----
 hw/arm/Kconfig                      | 12 ++++++++++++
 hw/display/Kconfig                  |  1 +
 3 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/default-configs/aarch64-softmmu.mak b/default-configs/aarch64-softmmu.mak
index 4ea9add..3a4b15e 100644
--- a/default-configs/aarch64-softmmu.mak
+++ b/default-configs/aarch64-softmmu.mak
@@ -3,10 +3,6 @@
 # We support all the 32 bit boards so need all their config
 include arm-softmmu.mak
 
-CONFIG_AUX=y
-CONFIG_DDC=y
-CONFIG_DPCD=y
-CONFIG_XLNX_ZYNQMP=y
 CONFIG_XLNX_ZYNQMP_ARM=y
 CONFIG_XLNX_VERSAL=y
 CONFIG_ARM_SMMUV3=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index aad2dd3..3577550 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -291,6 +291,18 @@ config STM32F205_SOC
 
 config XLNX_ZYNQMP_ARM
     bool
+    select AHCI
+    select ARM_GIC
+    select CADENCE
+    select DDC
+    select DPCD
+    select SDHCI
+    select SSI
+    select SSI_M25P80
+    select XILINX_AXI
+    select XILINX_SPIPS
+    select XLNX_ZYNQMP
+    select PCI      # TODO: Currently required for SDHCI and AHCI, remove later
 
 config XLNX_VERSAL
     bool
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index a5f3fc0..d2ae2f1 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -108,3 +108,4 @@ config VIRTIO_VGA
 
 config DPCD
     bool
+    select AUX
-- 
1.8.3.1

Re: [Qemu-devel] [PATCH 23/25] hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig

[Paolo Bonzini]

On 09/02/19 07:39, Thomas Huth wrote:
> +    select PCI      # TODO: Currently required for SDHCI and AHCI, remove later

I think SDHCI and AHCI should select it instead, similar to how FDC
selects ISA_BUS (see patch 25 of the Kconfig series).

Paolo

Re: [Qemu-devel] [PATCH 23/25] hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig

[Thomas Huth]

On 2019-02-11 15:45, Paolo Bonzini wrote:
> On 09/02/19 07:39, Thomas Huth wrote:
>> +    select PCI      # TODO: Currently required for SDHCI and AHCI, remove later
> 
> I think SDHCI and AHCI should select it instead, similar to how FDC
> selects ISA_BUS (see patch 25 of the Kconfig series).

Yes, that's likely the better way to work-around this issue. I'll add
that in v2 ...

 Thomas

[Qemu-devel] [PATCH 24/25] hw/arm: Express dependencies of the xlnx-versal-virt machine with Kconfig

[Thomas Huth]

Dependencies have been determined with trial-and-error and by
looking at the xlnx-versal.c source file.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/arm/Kconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 3577550..d9150cd 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -306,6 +306,10 @@ config XLNX_ZYNQMP_ARM
 
 config XLNX_VERSAL
     bool
+    select ARM_GIC
+    select PL011
+    select CADENCE
+    select VIRTIO_MMIO
 
 config FSL_IMX25
     bool
-- 
1.8.3.1

[Qemu-devel] [PATCH 25/25] hw/arm: Remove hard-enablement of the remaining PCI devices

[Thomas Huth]

The PCI devices should be pulled in by default if PCI_DEVICES
is set, so there is no need anymore to enforce them in the configs
file.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 default-configs/arm-softmmu.mak | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index e0d1a00..47f721e 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -31,16 +31,7 @@ CONFIG_RASPI=y
 CONFIG_DIGIC=y
 CONFIG_SABRELITE=y
 CONFIG_MSF2=y
-
-CONFIG_VGA=y
-
 CONFIG_NRF51_SOC=y
-
 CONFIG_FSL_IMX25=y
 CONFIG_FSL_IMX7=y
 CONFIG_FSL_IMX6UL=y
-
-CONFIG_PCIE_PORT=y
-CONFIG_XIO3130=y
-CONFIG_IOH3420=y
-CONFIG_I82801B11=y
-- 
1.8.3.1