From: "Cédric Le Goater" <clg@kaod.org>
To: Troy Lee <troy_lee@aspeedtech.com>, <qemu-devel@nongnu.org>
Cc: Peter Maydell <peter.maydell@linaro.org>,
Andrew Jeffery <andrew@aj.id.au>,
leetroy@gmail.com, "open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
Joel Stanley <joel@jms.id.au>,
klaus Heinrich Kiwi <klaus@klauskiwi.com>
Subject: Re: [PATCH] Supporting AST2600 HACE engine accumulative mode
Date: Thu, 23 Dec 2021 13:54:52 +0100 [thread overview]
Message-ID: <8df385c9-b25c-80bb-fb27-88f774eb44c6@kaod.org> (raw)
In-Reply-To: <20211222022231.231575-1-troy_lee@aspeedtech.com>
[ Adding Klaus ]
On 12/22/21 03:22, Troy Lee wrote:
> Accumulative mode will supply a initial state and append padding bit at
> the end of hash stream. However, the crypto library will padding those
> bit automatically, so ripped it off from iov array.
>
> Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
> ---
> hw/misc/aspeed_hace.c | 30 ++++++++++++++++++++++++++++--
> include/hw/misc/aspeed_hace.h | 1 +
> 2 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/hw/misc/aspeed_hace.c b/hw/misc/aspeed_hace.c
> index 10f00e65f4..7c1794d6d0 100644
> --- a/hw/misc/aspeed_hace.c
> +++ b/hw/misc/aspeed_hace.c
> @@ -27,6 +27,7 @@
>
> #define R_HASH_SRC (0x20 / 4)
> #define R_HASH_DEST (0x24 / 4)
> +#define R_HASH_KEY_BUFF (0x28 / 4)
> #define R_HASH_SRC_LEN (0x2c / 4)
>
> #define R_HASH_CMD (0x30 / 4)
> @@ -94,7 +95,10 @@ static int hash_algo_lookup(uint32_t reg)
> return -1;
> }
>
> -static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
> +static void do_hash_operation(AspeedHACEState *s,
> + int algo,
> + bool sg_mode,
> + bool acc_mode)
> {
> struct iovec iov[ASPEED_HACE_MAX_SG];
> g_autofree uint8_t *digest_buf;
> @@ -103,6 +107,7 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
>
> if (sg_mode) {
> uint32_t len = 0;
> + uint32_t total_len = 0;
>
> for (i = 0; !(len & SG_LIST_LEN_LAST); i++) {
> uint32_t addr, src;
> @@ -127,6 +132,21 @@ static void do_hash_operation(AspeedHACEState *s, int algo, bool sg_mode)
> plen = iov[i].iov_len;
> iov[i].iov_base = address_space_map(&s->dram_as, addr, &plen, false,
> MEMTXATTRS_UNSPECIFIED);
> +
> + total_len += plen;
> + if (acc_mode && len & SG_LIST_LEN_LAST) {
> + /*
> + * Read the message length in bit from last 64/128 bits
> + * and tear the padding bits from iov
> + */
> + uint64_t stream_len;
> +
> + memcpy(&stream_len, iov[i].iov_base + iov[i].iov_len - 8, 8);
> + stream_len = __bswap_64(stream_len) / 8;
> +
> + if (total_len > stream_len)
> + iov[i].iov_len -= total_len - stream_len;
> + }
> }
> } else {
> hwaddr len = s->regs[R_HASH_SRC_LEN];
> @@ -210,6 +230,9 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
> case R_HASH_DEST:
> data &= ahc->dest_mask;
> break;
> + case R_HASH_KEY_BUFF:
> + data &= ahc->key_mask;
> + break;
> case R_HASH_SRC_LEN:
> data &= 0x0FFFFFFF;
> break;
> @@ -234,7 +257,7 @@ static void aspeed_hace_write(void *opaque, hwaddr addr, uint64_t data,
> __func__, data & ahc->hash_mask);
> break;
> }
> - do_hash_operation(s, algo, data & HASH_SG_EN);
> + do_hash_operation(s, algo, data & HASH_SG_EN, data & HASH_DIGEST_ACCUM);
>
> if (data & HASH_IRQ_EN) {
> qemu_irq_raise(s->irq);
> @@ -333,6 +356,7 @@ static void aspeed_ast2400_hace_class_init(ObjectClass *klass, void *data)
>
> ahc->src_mask = 0x0FFFFFFF;
> ahc->dest_mask = 0x0FFFFFF8;
> + ahc->key_mask = 0x0FFFFFC0;
> ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
> }
>
> @@ -351,6 +375,7 @@ static void aspeed_ast2500_hace_class_init(ObjectClass *klass, void *data)
>
> ahc->src_mask = 0x3fffffff;
> ahc->dest_mask = 0x3ffffff8;
> + ahc->key_mask = 0x3FFFFFC0;
> ahc->hash_mask = 0x000003ff; /* No SG or SHA512 modes */
> }
>
> @@ -369,6 +394,7 @@ static void aspeed_ast2600_hace_class_init(ObjectClass *klass, void *data)
>
> ahc->src_mask = 0x7FFFFFFF;
> ahc->dest_mask = 0x7FFFFFF8;
> + ahc->key_mask = 0x7FFFFFF8;
> ahc->hash_mask = 0x00147FFF;
> }
>
> diff --git a/include/hw/misc/aspeed_hace.h b/include/hw/misc/aspeed_hace.h
> index 94d5ada95f..2242945eb4 100644
> --- a/include/hw/misc/aspeed_hace.h
> +++ b/include/hw/misc/aspeed_hace.h
> @@ -37,6 +37,7 @@ struct AspeedHACEClass {
>
> uint32_t src_mask;
> uint32_t dest_mask;
> + uint32_t key_mask;
> uint32_t hash_mask;
> };
>
>
next prev parent reply other threads:[~2021-12-23 13:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-22 2:22 [PATCH] Supporting AST2600 HACE engine accumulative mode Troy Lee
2021-12-23 12:54 ` Cédric Le Goater [this message]
2021-12-23 15:57 ` Klaus Heinrich Kiwi
2021-12-28 3:34 ` Troy Lee
2022-01-06 15:27 ` Peter Maydell
2022-01-07 1:46 ` Troy Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8df385c9-b25c-80bb-fb27-88f774eb44c6@kaod.org \
--to=clg@kaod.org \
--cc=andrew@aj.id.au \
--cc=joel@jms.id.au \
--cc=klaus@klauskiwi.com \
--cc=leetroy@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=troy_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).