qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
To: Fei Wu <fei2.wu@intel.com>, qemu-riscv@nongnu.org, qemu-devel@nongnu.org
Cc: Palmer Dabbelt <palmer@dabbelt.com>,
	Alistair Francis <alistair.francis@wdc.com>,
	Bin Meng <bin.meng@windriver.com>,
	Weiwei Li <liweiwei@iscas.ac.cn>,
	Daniel Henrique Barboza <dbarboza@ventanamicro.com>,
	Christoph Muellner <christoph.muellner@vrull.eu>
Subject: Re: [PATCH v4 1/2] target/riscv: separate priv from mmu_idx
Date: Thu, 23 Mar 2023 13:37:31 +0800	[thread overview]
Message-ID: <9423db2e-257f-016d-b404-17d8e5adc0ac@linux.alibaba.com> (raw)
In-Reply-To: <20230323024412.324085-2-fei2.wu@intel.com>


On 2023/3/23 10:44, Fei Wu wrote:
> Currently it's assumed the 2 low bits of mmu_idx map to privilege mode,
> this assumption won't last as we are about to add more mmu_idx.
For patch set has more than 1 patch, usually add a cover letter.
>
> Signed-off-by: Fei Wu <fei2.wu@intel.com>
> ---
>   target/riscv/cpu.h                             | 1 -
>   target/riscv/cpu_helper.c                      | 2 +-
>   target/riscv/insn_trans/trans_privileged.c.inc | 2 +-
>   target/riscv/insn_trans/trans_xthead.c.inc     | 7 +------
>   target/riscv/translate.c                       | 3 +++
>   5 files changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> index 638e47c75a..66f7e3d1ba 100644
> --- a/target/riscv/cpu.h
> +++ b/target/riscv/cpu.h
> @@ -623,7 +623,6 @@ G_NORETURN void riscv_raise_exception(CPURISCVState *env,
>   target_ulong riscv_cpu_get_fflags(CPURISCVState *env);
>   void riscv_cpu_set_fflags(CPURISCVState *env, target_ulong);
>   
> -#define TB_FLAGS_PRIV_MMU_MASK                3
>   #define TB_FLAGS_PRIV_HYP_ACCESS_MASK   (1 << 2)
>   #define TB_FLAGS_MSTATUS_FS MSTATUS_FS
>   #define TB_FLAGS_MSTATUS_VS MSTATUS_VS
> diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
> index f88c503cf4..76e1b0100e 100644
> --- a/target/riscv/cpu_helper.c
> +++ b/target/riscv/cpu_helper.c
> @@ -762,7 +762,7 @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical,
>        * (riscv_cpu_do_interrupt) is correct */
>       MemTxResult res;
>       MemTxAttrs attrs = MEMTXATTRS_UNSPECIFIED;
> -    int mode = mmu_idx & TB_FLAGS_PRIV_MMU_MASK;
> +    int mode = env->priv;
>       bool use_background = false;
>       hwaddr ppn;
>       RISCVCPU *cpu = env_archcpu(env);
> diff --git a/target/riscv/insn_trans/trans_privileged.c.inc b/target/riscv/insn_trans/trans_privileged.c.inc
> index 59501b2780..9305b18299 100644
> --- a/target/riscv/insn_trans/trans_privileged.c.inc
> +++ b/target/riscv/insn_trans/trans_privileged.c.inc
> @@ -52,7 +52,7 @@ static bool trans_ebreak(DisasContext *ctx, arg_ebreak *a)
>        * that no exception will be raised when fetching them.
>        */
>   
> -    if (semihosting_enabled(ctx->mem_idx < PRV_S) &&
> +    if (semihosting_enabled(ctx->priv < PRV_S) &&
>           (pre_addr & TARGET_PAGE_MASK) == (post_addr & TARGET_PAGE_MASK)) {
>           pre    = opcode_at(&ctx->base, pre_addr);
>           ebreak = opcode_at(&ctx->base, ebreak_addr);
> diff --git a/target/riscv/insn_trans/trans_xthead.c.inc b/target/riscv/insn_trans/trans_xthead.c.inc
> index df504c3f2c..adfb53cb4c 100644
> --- a/target/riscv/insn_trans/trans_xthead.c.inc
> +++ b/target/riscv/insn_trans/trans_xthead.c.inc
> @@ -265,12 +265,7 @@ static bool trans_th_tst(DisasContext *ctx, arg_th_tst *a)
>   
>   static inline int priv_level(DisasContext *ctx)
>   {
> -#ifdef CONFIG_USER_ONLY
> -    return PRV_U;
> -#else
> -     /* Priv level is part of mem_idx. */
> -    return ctx->mem_idx & TB_FLAGS_PRIV_MMU_MASK;
> -#endif
> +    return ctx->priv;
>   }
>   
>   /* Test if priv level is M, S, or U (cannot fail). */
> diff --git a/target/riscv/translate.c b/target/riscv/translate.c
> index 0ee8ee147d..e8880f9423 100644
> --- a/target/riscv/translate.c
> +++ b/target/riscv/translate.c
> @@ -69,6 +69,7 @@ typedef struct DisasContext {
>       uint32_t mstatus_hs_fs;
>       uint32_t mstatus_hs_vs;
>       uint32_t mem_idx;
> +    uint32_t priv;
>       /* Remember the rounding mode encoded in the previous fp instruction,
>          which we have already installed into env->fp_status.  Or -1 for
>          no previous fp instruction.  Note that we exit the TB when writing
> @@ -1162,8 +1163,10 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
>       } else {
>           ctx->virt_enabled = false;
>       }
> +    ctx->priv = env->priv;

This is not right. You should put env->priv into tb flags before you use 
it in translation.

Zhiwei

>   #else
>       ctx->virt_enabled = false;
> +    ctx->priv = PRV_U;
>   #endif
>       ctx->misa_ext = env->misa_ext;
>       ctx->frm = -1;  /* unknown rounding mode */


  reply	other threads:[~2023-03-23  5:38 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-23  2:44 [PATCH v4 0/2] target/riscv: reduce MSTATUS_SUM overhead Fei Wu
2023-03-23  2:44 ` [PATCH v4 1/2] target/riscv: separate priv from mmu_idx Fei Wu
2023-03-23  5:37   ` LIU Zhiwei [this message]
2023-03-23  6:00     ` Wu, Fei
2023-03-23  6:25       ` Wu, Fei
2023-03-23  6:59       ` LIU Zhiwei
2023-03-23 13:18         ` Wu, Fei
2023-03-23 16:07       ` Richard Henderson
2023-03-24  1:20         ` Wu, Fei
2023-03-24  2:37           ` Richard Henderson
2023-03-24  3:01             ` Wu, Fei
2023-03-23 15:53   ` Richard Henderson
2023-03-24  1:02     ` Wu, Fei
2023-03-24  1:22       ` Wu, Fei
2023-03-24 12:31       ` Wu, Fei
2023-03-23  2:44 ` [PATCH v4 2/2] target/riscv: reduce overhead of MSTATUS_SUM change Fei Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9423db2e-257f-016d-b404-17d8e5adc0ac@linux.alibaba.com \
    --to=zhiwei_liu@linux.alibaba.com \
    --cc=alistair.francis@wdc.com \
    --cc=bin.meng@windriver.com \
    --cc=christoph.muellner@vrull.eu \
    --cc=dbarboza@ventanamicro.com \
    --cc=fei2.wu@intel.com \
    --cc=liweiwei@iscas.ac.cn \
    --cc=palmer@dabbelt.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).